Andhra Pradesh Central Power Distribution Corporation Limited Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Andhra Pradesh Central Power Distribution Corporation Limited - APCPDCL Tender
Electrical and Electronics
Electrical Works
Opening Date27 Feb 2023
Closing Date6 Mar 2023
Tender Amount₹ 2,35,08,370
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
597787Bid Award Id
ViewTender No
CGM/PROJ/APCPDCL/VJA/SIP-13/22-23Tender Authority
Andhra Pradesh Central Power Distribution Corporation Limited ViewPurchaser Address
-Website
http://https://apcpdcl.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Construction of approach Road, retaining walls, Levelling of site etc.
-
-
-
Providing of Borewell, Overhead tank etc.
-
-
-
Construction of Toilet
-
-
-
Erection of 33 KV line
-
-
-
Erection of 11 KV Line
-
-
-
Erection of LT line
-
-
-
Erection of 160/100KVA DTRs
-
-
-
Sub-Total for Sub-Station
-
-
-
add 1% welfare cess
-
-
-
add 18 % GST
-
-
-
TOTAL
-
-
-
Description of Item
-
-
-
Earth work excavation in all types of soil which can be excavated with pick axes and crow bars and do not require blasting in all conditions such as dry, wet, slushy etc., including shoring, strutting and dewatering where ever necessary covering initial lead for foundations for finished item of work.
13.5
-
-
Supply and filling in the foundations and basement with sand, including watering and consolidation thoroughly in 150 mm layers. (including seigniorage charges)
2
-
-
PCC (1:5:10) Prop using 40 mm HBG metal machine mixed laid in positions in layers not exceeding 15 Cm thickness including cost and conveyance of all materials, seigniorage charges, water to work site and all operational, incidental, labour charges such as machine mixing of concrete laying, tamping, curing etc., complete for finished item of work.
2.1
-
-
Construction of R.R.masonary in C.M(1:6) using hand granite including cost conveyance of all materilas, seignoirage charges, labour charges, operational, incidental charges etc., complete for finished item of work.
8
-
-
Construction of C.R.S Masonary in CM(1:6) using hard granite stone including cost and conveyance of all materials, seignoirage charges, labour charges, operational, incidental charges etc., complete for finsihed item of work.
7.3
-
-
Filling of gravel in trenches, sicks of foundations, basements etc. of approved quality in layers not exceeding 15 c.m. thick consolidating each deposited layer by watering and ramming including cost and conveyance of gravel ,seignoirage charges, water to work site and operational, incidental, labour charges etc. complete for furnished item of work
17
-
-
Construction of super structure with brick masonary in c.m. (1:6) prop. Using 2nd class bricks with tradional size of 23x11x7xcm having a crushing strenth of not less than 35Kgs/cm2 including cost and conveyance of gravel ,seignoirage charges, water to work site all operational, incidental, labour charges such as scaffolding, mixing mortor, constructing masonary leads lifts, curing etc., complete for furnished item of work
14
-
-
RCC M-20 Nominal mix corresponding to Table 9 of IS 456 using 12mm to 20mm size graded HBG machine crushed metal (50% each) from approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site and including Seigniorage charges, sales& other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, centering,shuttering, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work as directed by the Engineer-in-charge.
-
-
-
For Lintels
-
-
-
i) Ground Floor
0.4
-
-
For Sun shades/Chajjas (62mm average thickness and 60 cm width)
-
-
-
i) Ground Floor
20
-
-
For roof slabs 150mm tick
-
-
-
i) Ground Floor
2.8
-
-
For Beams
-
-
-
i) Ground Floor
33
-
-
For Footings
77
-
-
For Plinth Beams
30.8
-
-
For Columns
-
-
-
i) Ground Floor
99
-
-
P.C.C.(1:3:6) prop. using 20mm(SS-5) gauge HBG machine crushed metal including cost and conveyance of all materials seignoirage charges, water to work site all operational, incidental, labour charges such as scaffolding, ceiling, mixing concrete laying, vibrating, curing etc., for furnished item of work for bed blocks, for doors, windows ventilators etc. and damp proof course at plinth level.
0.7
-
-
Supply and fixing of Kadapa slabs of 40mm thick for racks including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as directed by the Engineer-in-Charge.
3
-
-
Providing of high yield strength deformed bars/mild steel bars of different diameters, cutting & bending to required sizes in shapes, placing in position with cover blocks of approved material in size firmly with MS binding wire, forming grills for reinforcement work as per approved designs &drawings to be supplied at the time of execution of work including wastage of binding wire, cover blocks all operational, incidental, labour charges such as cutting, bending placing in position etc. complete for finished item of work (payment will be made on the basis of weight of the fabricated deformed bars/mild steel plain bars only)
0.27
-
-
Flooring with a bed of 100mm thick in CC (1:4:8) with 40mm & 20mm size HBG Metal from approved quarry including cost and conveyance charges of cement and all other materials to site, seigniorage charges, labour charges for machine mixing, laying concrete, finishing top surface to the required level, curing etc., complete for finished item of work
1.75
-
-
Plastering 12 mm thick in one coat for superstructure for "EVEN FACES OF WALLS" with CM(1:5) with smooth finish at all heights including cost and conveyance charges of cement and all other materials to site, scaffolding charges, seigniorage charges, incidental and operational charges, all labour charges for mixing mortar, finishing, all leads and lifts, curing, cutting grooves etc., complete
70
-
-
Plastering 20mm thick two coats, first coat in cm(1:6) prop.16mm thick and 2nd coat in cm(1:4) prop. 4mm thick with dubara sponge finishing including cost and conveyance of all materials, seignoirage charges, operational, incidental, labour charges such as scaffolding, mixing curing leads, lifts etc., complete for "UNEVEN FACES OF WALLS"
55
-
-
Plastering to ceiling, 12 mm thick in one coat in CM(1:3) with sponge finish at all heights including cost and conveyance charges of cement and all other materials to site, scaffolding charges, seigniorage charges, incidental and operational charges, all labour charges for mixing mortar, finishing, all leads and lifts, curing, cutting grooves etc., complete for finished item of work
35
-
-
Supplying and fixing in position M.S hallow frames of size 105x60x1.25xmm thick for doors along with necessary accessories such as M.S hinges 100 mm long etc., as stated in the detailed specifications including cost and conveyance of all materials to work site, labour charges etc., complete (a). 1.07mx1.980m.
1
-
-
Supply and fixing of 30mm thick Flush door shutter,solid bond wood block board type with teak ply on both faces confirming to IS:2202 of ANAND/RAAVILA/KUTTY/ STANDARD/ SHUBHDWAR/ITP or equivalent vide item code BMT-N.13 including cost and fittings of 4 Nos 125mm Brass Butt hinges , 3 Nos. MS Tower bolts, 1No 250 mm powder coated aldrop, 2 Nos 150 mm MS powder coated handles, 1No. door stopper complete for finished item of work
1.89
-
-
Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made.
3.35
-
-
Providing impervious coat with CM(1:3) 20 mm thick using approved waterproofing compound of 1Kg. per 1 Bag of Cement over terrace including cost and conveyance charges of cement and all other materials to site, scaffolding charges, seigniorage charges, incidental and operational charges, all labour charges for mixing mortar, finishing, all leads and lifts, curing, cutting grooves etc., complete for finished item of work and as directed by the Engineer in charge.
23
-
-
Painting the walls (Inside) and ceiling with two coats of Plastic emulsion paint grade-I of Asian make over one coat of primer of approved colour, make and shade over one coat of white cement primer including cost and conveyance of all materials to site, water to site, cost of brushes, scaffolding charges, all labour charges, curing, tools and plant, incidental charges, all leads and lifts etc at all heights of all floors complete for finished item of work and as directed by the Engineer in charge.
75
-
-
Painting to walls (out side) with two coats of Weather proof exterior emulsion of Asian (APEX) or equivalent quality paint of approved colour, make and shade over one coat of white cement primer including cost and conveyance of all materials, water to site, cost of brushes, scaffolding charges, all labour charges, curing, tools and plant, incidental charges, all leads and lifts etc at all heights of all floors complete for finished item of work and as directed by the Engineer in charge.
103
-
-
Painting with 2 coats of synthetic enamel paint over one coat of Primer including cost and conveyance of all materials all leads,lifts etc complete.
8
-
-
Supply and fixing of 3" outer dia PVC water spouts of standard make including cost and conveyance of all materials necessary auxilaries such as bends, shover, clamps etc., complete for finished item of work.
1
-
-
Flooring with ceramic floor tiles, 7.3mm thick 1st quality of approved shades set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete for finished item of work.
25
-
-
Pointing to the C.R.S masonary with CM (1:3) prop including cost and conveyance of all materials, sienarage charges, labour charges etc., complete for finished item of work.
15
-
-
Supply and erection of MS gates of size (4200 mm X 1420 mm and 1220 mm X 1420 mm) using 50 mm dia MS pipe and 12 mm dia rods and 300 mm X (4200 mm + 1220 MM) MS sheet (1.5 mm thick) and painting two coats of superior quality enamel paint over one coat of primer as per drawing. (excluding cost of RCC gate pillars (0.45 X 0.45 X 1.5m), excluding plastering )
250
-
-
Providing of pheripheral fencing arround the site as given in the drawing including cost of R.C.C. fencing poles, G.I. barbed wire & stringing etc., complete for finished item of work. (excluding cost of excavation of pits & concreting)
-
-
-
Supply,placing in alignment of RCC fencing post of 1.8m length including cost and conveyance of fencing post, labour charges for placing in alignment all are as specified by the Engineer-in-charge at site - - etc., complete. (for supports & struts)
140
-
-
Supply, stringing and tying galvanised steel barbed wire (IS:278-1962 type 1) weighing 9.38kg per 100 metres(min.), straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (posts and struts of wood, concrete, steel etc.,) and straining bolts shall be paid for separately) (Length of GI Barbed wire)
2400
-
-
Note: 1) The rates to be quoted for works in the schedule shall be inclusive of cost of cement.
-
-
-
2) The Reinforcement steel shall be procured by the contractor for the complete work and the quoted rates for works in the schedule shall be inclusive of cost of Reinforcement steel.
-
-
-
3) The rates quoted shall include cost of construction materials like metal ,sand, bricks and stone blocks and shall be for finished item of whole with all leads and lifts including all labour charges & seigniorage charges
-
-
-
Total for SS 1 Control Room
-
-
-
Description of Item
-
-
-
Clearing of Sub-Station site using JCB on hire basis including all operational charges, hire charges complete as directed by the engineer in charge
5
-
-
Earth work excavation in all types of soil which can be excavated with pick axes and crow bars and do not require blasting in all conditions such as dry, wet, slushy etc., including shoring, strutting and dewatering where ever necessary covering initial lead for foundations for finished item of work.
55
-
-
Supply, Fabrication & Erection of structural supports (GI Joists 150 x 150 mm drilling holes etc.,) and structural Members (GI Channel 100 x 50mm) , GI Angle and seating channels including cost of G.I. bolts & Nuts for GI Joists & GI Channel, GI Angle including fabrication, galvanisation, transport, loading , unloading & erection charges (as per clasue 3.a 4 of Section 5 (A) & as per Clause 12.3 of Section 5(A) of Annexure-2B
16
-
-
Supply & Erection of Yard lighting supports (Excluding excavation and CC works)
-
-
-
8 M Long PSCC Poles (Poles are to be supplied by the contractor)
10
-
-
Laying foundations for main and auxiliary structures, supports, breaker and transformer plinth, coping of supports etc., including shoring, shuttering, and dewatering the pits before and during the process of laying concrete in following proportions and curing for 14 days (Rate quoted shall be inclusive of fixing and concreting foundation bolts wherver necessary) (Sketches enclosed) (as per clause 2.9 of Section 5A).
-
-
-
Cement concrete (1:4:8) using 40mm size well graded, HBG metal for foundations, including cost conveyance of materials, all leads and lifts, machine mixing, laying, consolidation, curing etc., complete for finished item of work. (base concreting) (including seigniorage charges) (including 1No. Addl. PTR & LV VCB Plinths)
12
-
-
Cement concrete 1:3:6 using 20 mm H.B.G. metal (mass concreting) (including seigniorage charges) for Power Transformer & VCB Plinths (including 1No. Addl. PTR & LV VCB Plinths)
110
-
-
Construction of C.R.S Masonary in CM(1:6) using hard granite stone including cost and conveyance of all materials, seignoirage charges, labour charges, operational, incidental charges etc., complete for finsihed item of work.
3.1
-
-
Supply and Fixing of 120 lb rail poles of 3 Mtr length each over the transformer plinth including cost of rail poles, with stoppers.
2
-
-
Plastering the foundation plinths 12mm thick in 1:3 cement and white washing (two coats) with JANATA CEM or equivalent cement paint, including cost of all materials including cement.
80
-
-
Excavation of cable trench of size 600 x 450 mm in the switchyard including cost of all materials and labour complete (as per clause 2.14c of Section 5A)
60
-
-
Cable Duct in the CONTROL ROOM. Construction of cableduct in the control room shall be of size 600 x 450 mm and closing of duct with cement slabs includes cost of all materials and labour and the cost of cement (as per clause 2.14 B of Section 5A)
2
-
-
Laying of hume pipe of 300 mm diameter for cables at road crossing points including cost of all materials and labour complete.(As per clause 2.14 A of Section 5A)
8
-
-
Hoisting of insulators and hardware stretching the conductor and stringing tensioning and clamping of 33 KV bus comprising of three (3) conductors, with Single 200 sq.mm ACSR conductor (The approximate length of bus section will be 11.5 Mt) (Clause No. 4.00 of Section 5A),
1
-
-
Hoisting of insulators and hardware stretching the conductor and stringing tensioning and clamping of 11 KV bus comprising of three (3) conductors, with Single 200 sq.mm ACSR conductor (The approximate length of bus section will be 9 Mt) (Clause No. 4.00 of Section 5A),
2
-
-
Connecting the bus with Fired Wedge connectors
-
-
-
Connecting the equipment to bus and /or another equipment with single 200 sq. mm ACSR conductor including measuring, Cutting (complete). (excluding cost of fired wedge connectors)
100
-
-
Wedge connector suitable for four hole paddle for PT/ CT/ CB/ Isolator etc for termination with ampact panther conductor
6
-
-
Wedge connector suitable for four hole paddle for PT/ CT/ CB/ Isolator etc for termination with ampact DOG conductor
3
-
-
Wedge connector suitable for single panther to single panther conductor
3
-
-
Four hole paddle 895 A for termination for PT/ CT/CB/ Isolator etc
6
-
-
Four hole paddle 610 A for termination for PT/ CT/CB/ Isolator etc
3
-
-
Palm connector suitable for (20 to 25 mm )dia stud
3
-
-
Supply & erection of 33 KV 1-Ph Post type insulator (each) including cost of all materials & labour complete
3
-
-
Supply & erection of 11KV 1-Ph Post type insulator (each) including cost of all materials & labour complete
3
-
-
Laying of earth mat including excavation of trenches welding and fixing of trenches welding and fixing lugs, connecting to equipment and including connecting cast iron pipes with the following size of MS flats. including transport, loading , unloading & erection charges
-
-
-
75 x 8 mm M.S. Flat (Earth Mat)
500
-
-
50 x 6 mm M.S. Flat (Risers)
500
-
-
Excavation of earth pit, free maintenance earth Pipe, cement collar, bentonite compound etc., and labour charges complete (as per the Sketches).
A) U/L listed and marked duly engraving on the Grounding Electrodes of 5/8’’ or better Copper Bonded steel rods with minimum 25 kA peak and 14 kA rms for 1 sec as per specification with clear marking of U/L Reg No, Name of the company and part No on the electrode
b)Ground enhancement material of minimum 20 kG per kit with a resistivity of less than 0.12 ohm-m as per IEEE80 clause 14.5d duly specifying name of manufacturer, Batch code, resistivity value, testing apparatus used and conformity statement as per IEC 62561-7. c)H clamp of gun metal connecting adaptor as per specification d)Installation of copper bonded steel rod of dia 5/8 inch or better with a length of 3meters refilling with Ground Enhancement Material (GEM) of 0.12 ohm meter resistivity as per IEEE 142-2007 in Hard soil/Hard Rock/High Water Table Zone/ Sandy soil with boring/Trench, soil compaction & re-bore/refilling with installation as per bid specification
24
-
-
Drilling of earth for 6" dia bore with Power rig for providing of master earthing (Counter poise earthing)
20
-
-
Laying of control cables of all sizes in cable ducts as follows as per clause 7 of Section 5A
-
-
-
Note : This includes running cables in control room, SWITCH YARD and Roadcrossing etc.
-
-
-
2 Core 2.5 sq.mm. Copper cable
400
-
-
4 Core 2.5 sqmm copper cable
400
-
-
10 core 2.5 sq. mm copper cable
60
-
-
Cable terminations to the Switchgear marshalling boxes/ panel terminal blocks/ control & relay panels, LTAC panel, including providing suitable ferrules and lugs as per specification (including cost of Ferrules and lugs and glands and labour complete as per specification).
250
-
-
Note : Rate to be quoted is for termination of one core of cable at both ends.
-
-
-
Supply and fixing of outdoor type AC street light fixtures with all necessary accessories fixed to GI pipe of 3/4" dia 3' length 120 degrees bent fixed to the existing pole / support in the switchyard
-
-
-
b) Outdoor type 9 LED energy efficiency AC street light
8
-
-
b) Supply and fixing of 4 way distribution board suitable for single pole MCBs in sheet steel enclosure with 1No. 32 Amps DP isolator and 4Nos. 6-32 Amps single pole MCBs including cost and conveyance of all materials, labour charges with necessary connections etc., complete (MDS make)
1
-
-
Erection of the following equipment with CTs & control panel excluding cost of VCBs and CTs and including transport and labour as per specification.
-
-
-
a) Erection of 11KV, 20 KA, VCB including trivector meter and control & relay panel (Feeder)
1
-
-
b) Erection of 11KV 20 KA, LV VCB including control & relay panel (LV)
4
-
-
Supply and erection of 24 Volts/ 40 AH Trickle charger with sealed maintainance free led acid batteries.
5
-
-
Erection of 11 KV Potential Transformer three phase including transport, loading and unloading charges
1
-
-
Supply and erection complete of the following equipment:
-
-
-
Supply and erection of 33 KV Lighting Arrester (Stn Type) for 33 KV Bus
3
-
-
Supply and erection of 33 KV Lighting Arrester for 33 KV Incoming feeder
3
-
-
Supply and erection of 11 KV Lightining Arrestors (Stn. Type)
3
-
-
Supply and erection of 11 KV Lightning Arrestors (line type)
15
-
-
a) Supply and erection of 33 KV Isolators (800 A) double break with Post Type Insulator (G.I. Bolts should only be used )
3
-
-
b) Supply and erection of 11 KV Isolators (400 A) double break with Post type Insulator (G.I. Bolts should only be used )
7
-
-
b) Supply and erection of 11 KV Isolators (400 A) single break with Post type Insulator (G.I. Bolts should only be used ) for feeder outgoing
5
-
-
c) Supply and erection of 11KV 400A isolators with single phasing arrangement with Post type Insulator (G.I. Bolts should only be used)
2
-
-
a) Supply and erection of 33 KV HG Fuse set with Accessories complete
2
-
-
b) Supply and erection of 11KV HG Fuse sets with Accessories complete with GI
1
-
-
Supply and erection of 3 Phase 25 KVA CSP Station Transformer including cost of LT Distribution box-including, erection of LT Switch gear, complete with cost of all materials LT Dist Box LT Cabling shall be done through suitable size of PVC Pipe for verticle run of cable at Dist. Box including transport, loading and unloading charges of all materials.
1
-
-
Erection of 33 KV/11KV Power Transformer complete as per specification including transport, loading , unloading and erection charges
-
-
-
5 MVA Power Transformer
1
-
-
Supply & Erection of LTAC panels, annunciation panels in the control room, duly mounting them on channels and grouping them with foundation bolts including cost of pannels. LTAC cable and cable laying in the trench of size 600 x 450 mm
-
-
-
a) Supply & laying of LTAC cable 25 Sq.mm 4 core as per clause 7 b of Section 5A) of RPG/ Finolex/ Havells/ Paragon/ V-Guard make
60
-
-
b) LTAC panel (as per clause 8.0 of Section 5A)
1
-
-
c) DC and annunciation Board (as per clause No. 9.0 of section 5A)
1
-
-
Erection of marshalling Box on the structure (pole mounted type) marshalling boxes shall be supplied by the contractor.
4
-
-
Supply of Fire fighting equipment (as mentioned below)
-
-
-
Supply and fixing of 4Nos of 9 Ltrs capacity round bottom sand buckets along with bucket sand, Fire buckets with round bottom type enamel painted, white inside & red out side and letter FIRE inblack out side & Handle with mounting bracket installed on Fire bucket stand fabricated by M.S.angles as per local fire officers standards including cost of all materials
1
-
-
Supply and fixing of CO2 type Fire Extinguishers 4.5 Kg capacity confirming to IS 2878 made from ISI marked steam less cylinder confirming to IS:7285 & CE certified and fitted with ISI marked controlled valve confirming to IS:3224, high pressure 1 Mtr discharge hose & horn complete with initial gas charged with carrying handle with wheels and wall mounting bracket. Squeeze lever discharge, used unused indicator, Aphoxy coated paint (Red) with 93% gloss
with 2 years warranty (Safex / Kenex / Bharat / Reliance make) Including transportation, all taxes and all labour charges etc complete.
4
-
-
Supply of tools - Standard Tool Box with Tools of Taparia Make (or) other recommended type as per Annexure 3
1
-
-
11 KV Insulated Rubber Hand Gloves
2
-
-
Auto switch-on wall mounted emergency light with 2 tubes of Philips/Bajaj make
2
-
-
Rechargeble portable light with LED bulbs
1
-
-
Danger boards
12
-
-
Earth Discharging rods of 10 feet long for HT/LT lines made out of cane stick in PVC Pipe 32mm dia and 2 mm thick, fully covered, at one end fixed with copper strip of size 25X3 mm of 250mm length by 2 Nos. brass bolts and wing nuts with washers having 6 Sqmm PVC flexible copper wire of 10 Mt length.
6
-
-
Supply of steel office Table of size 4' x 2' x 30" with 18 mm plywood, Teakwood finishing with Drawers on right hand side and with automatic locking system
1
-
-
Supply of PVC chairs of standard make
3
-
-
Supply of Quartz wall clock 1' x 1' size of reputed make
1
-
-
Supply and fixing 550 x 400mm size indian type Flat back Hand wash-basin (Parrware/Neycer ofkequivalent make) with necessary bracket and fixing one chromium coated CP tap and accessories like waste water pipe and connection for the tap and G.M. wheel valve.(Single C.P.Pillar cock) (Item Code : BMW-D.24)
1
-
-
Supplying and fixing of good quality TV shape mirrors of size 60cmx45cm with alround PVC beading of approved colour with all fixtures including cost and conveyance all materials, labour charges for fixing etc., complete for finished item of work as directed by the Engineer in charge of work
1
-
-
Security fencing with small iron gate and removable GI linked mesh with 75X40X6mm ISMC MS Channel Support with frame made of MS Angle of size 25X25X6 mm (ISA) and with 2Nos. MS Flat of size 25X6 mm for supporting the mesh including cost of all materials, labour charges complete as shown in the sketch
100
-
-
Supply and spreading of 65mm Chips (HBG Metal) with a band of 150 mm height uniformily throughout the switchyard including cost & conveyance of all materials, labour charges etc. complete
50
-
-
Painting of operating rods of 33 KV, 11KV AB Switches with Post Office Red colour (including cost of paint).
2
-
-
Painting of all supports for a height of 0.3 M above coping with bitumen paint (Black colour) and painting of coping two coats of white cement (including cost of paint).
34
-
-
Total for SS-2 (Switch Yard)
-
-
-
Description of Item
-
-
-
Wiring with 1/1.40 mm unsheathed PVC 3/20 copper cable with No. 14 SWG G.I. Wire for earth continuity in 16 gauge surface PVC conduit pipe with necess-ary earth clips with 5 amps flush typed control switch for light points fan points and plug point including fixing of control switch on teak wood board covered with decolam sheet including cost of all materials & labour.
30
-
-
Supply and fixing of 48" (1200mm) Sweep ISI mark Ceiling Fan of makes Crompton / Bajaj Kassels 50 / Usha atom as per IS 374 - 1979 and, with double ball bearings and with Electronic Regular of Modular of Cabtree Thames Platinum / GM / Million / Anchor Roma Viola / Toyoma / L&T / Fortune Art / CPL including cost and conveyance of all materials and labour charges complete for finished item of work as directed by the Engineer-in-Charge.
2
-
-
Supply of 1 x 36/40W Box type tube light luminaire powder coated CRCA sheet steel housing with VPIT Chokes and all standard accessories of makes Crompton / Bajaj / Surya / Havells / HPL / Fortune Art and 1 No. 36/40 W tube light including cost and conveyance of all materials and labour complete for finished item of work as directed by Engineer - In - Charge
4
-
-
Supply and fixing decorative portico type light fitting with all accessories to the ceiling of varandah including giving connections.
2
-
-
Supply and fixing of batten holder/ slanting holder in lieu of ceiling rose of light point complete with all connections and labour charges, cost of 60 W bulb etc., complete for finished item of work.
4
-
-
Supply and fixing water tight well glas fittings with brass holder complete with 100 watt bulb including cost of GL bracket complete
3
-
-
Supply and fixing flood lighting fixed with 20 mm dia, GI pipe of 3 Mts., long including all labour charges complete.
-
-
-
Supply and fixing of light luminarie integral with outdoor type 35 LED energy efficiency AC street light including cost of fixture,25mm dia. Medium grade G.I. bent up pipe of length 1.52m, all accessories and labour charges complete for finished item of work as directed by the Engineer-in-charge.
2
-
-
Supply and fixing of 6A /10A 3/2 pin 2 module Modular Socket with sthutter of Legrand Arteor/ Schneider Zen celo/ MK Blenge with switch control of 6A /10A Modular switch of Legrand Arteor/ Schneider Zen celo/ MK Blenge with earth continuity including wire leads, earth connections along with all labour charges etc., complete.
1
-
-
Supply and fixing of 16A /6A Modular Socket of Cabtree thames Platinum/GM/Anchor Roma/Mossaic/L&T/North West/ MK/ Salzer with switch control of 6A /10A Modular switch of Mossaic/L&T/North West/ MK/ Salzer with in a seperate metal box (Independent Mounting) with earth continuity including wire leads, earth connections along with all labour charges etc., complete.
2
-
-
Supply and run of 2 of 36/0.3 mm (2.5 sqmm) F.R. PVC insulated flexible copper cable 1100V grade make Finolex/RR Kabel in existing pipe for mains including all labour charges complete..
70
-
-
Supply and fixing of 4-way VTPN Distribution board suitable for accommodating 4 pole Isolator as incomer with IP 43 Protection as per IS:13032 and suitable for 4Nos T.P.outgoings etc., complete of makes Legrand / Schneider including cost of D.B., 1No.63A FP isolator, 12 Nos. 6-32A 10KA SP MCBs of make Legrand / Schneider., giving all internal connections and labour charges for surface/flush mounting etc. complete for finished item of work as directed by the Engineer-in-charge.
1
-
-
Run 4 of 7/20 mm PVC unsheathed copper 650 volts grade cable in 50 mm. 16' guage PVC surface conduit pipe with earth clips and No. 8 SWG GI wire for earth continuity for run of main from meter board to 30 Amps.ICTP main switch including cost of all materials.
10
-
-
Supply and run of 2 of 56/0.3mm (4.0 Sqmm) FRLS / HFFR / ZHFR PVC insulated ISI Copper cable of makes Finolex / RR kabel. in existing pipe for mains including all labour charges complete.
30
-
-
Supply and run of 2 of 36/0.3 mm (2.5 sqmm) F.R. PVC insulated flexible copper cable 1100V grade make Finolex/RR Kabel in existing pipe for mains including all labour charges complete.
30
-
-
Providing independent earthing for 3 phase main board asper ISI 732 with 40 mm Gi pipe of 0.3 meters length for taking earth wire including supply of hard coke and salt and other materials including all labour charges complete.
1
-
-
Supply and fixing of 30 Amps ICTP main switch from the approved suppliers as per IS.
4
-
-
Note : Cost of all materials, steel and, cement required for the work and labour are included in the rates. Samples of all materials used shall have IS Certification and got approved by the Executive Engineer.
-
-
-
Total for SS 3 (Electrical wiring for the control house)
-
-
-
Description of Item
-
-
-
Supply and spreading gravel / approved quality of soil for levelling of site for switch yard, control room including stacking for pre-measurements, conveyance for an average lead of 100 mts., spreading, watering and rolling with 2 to 3 ton capacity roller. (including seigniorage charges)
700
-
-
Back filling of foundations with excavated soils in switch yard including watering and consolidation with 150 mm layer.
20
-
-
FORMATION OF WBM APPROACH ROAD :
-
-
-
Supply and spreading of gravel in uniform layers and compacting with smooth wheel roller of 10t capacity to achieve the desired density, watering and compacting to the required density as per Technical Specification of MORD including cost and conveyance of all materials,all incidental and operational charges,hire charges of T&P etc. complete for finished item of work as directed by Engineer-in-charge
100
-
-
Providing, laying, spreading and compacting stone aggregates of 65 mm Single nominal size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density as per Technical Specification of MORDto a compacted thickness of 100 mm.
120
-
-
Construction of hume pipe culvert :
-
-
-
Earth work excavation in all types of soil which can be excavated with pick axes and crow bars and do not require blasting in all conditions such as dry, wet, slushy etc., including shoring, strutting and dewatering where ever necessary covering initial lead for foundations for finished item of work.
12
-
-
Supply and filling in the foundations and basement with sand, including watering and consolidation thoroughly in 150 mm layers. (including seigniorage charges)
3
-
-
Cement Concrete (1:4:8) using 40 mm size well graded HBG metal for foundations including cost and conveyance of all materials, all leads and lifts, consolidation, curing etc.,complete for finished item of work ( Base concreting ) ( including seignorage charges ) ( including 1 No. addl. PTR & LV VCB Plinths)
3
-
-
Supply and keeping the 450 mm dia RCC Plain ended Hume pipes in position including fixing collars etc. complete.
7.5
-
-
Construction of R.R.masonry in C.M(1:6) using hand granite including cost conveyance of all materilas, seignoirage charges, labour charges, operational, incidental charges etc., complete for finished item of work.
17
-
-
Brick masonry CM (1:6) mix using well burnt country bricks including cost and conveyance of all materials and labour charges etc.complete
5
-
-
Supply and filling of borrowed/naturally occuring gravel in uniform layers and compacting with smooth wheel roller of 10t capacity to achieve the desired density, watering and compacting to the required density as per Technical Specification of MORD including cost and conveyance of all materials,all incidental and operational charges,hire charges of T&P etc. complete for finished item of work as directed by Engineer-in-charge.
64
-
-
Flush pointing with CM(1:3) to CR stone masonry including cost and conveyance charges of cement and all other materials to site, scaffolding charges, seigniorage charges, incidental and operational charges, all labour charges for mixing mortar, finishing, all leads and lifts, curing, cutting grooves etc., complete for finished item of work and as directed by the Engineer in charge.
5
-
-
Plastering with CM (1:5) Mix 12 mm thick including cost and conveyance of all materials and labour charges etc.
30
-
-
CONSTRUCTION OF RETAINING WALL AROUND SWITCH YARD:
-
-
-
Earth work excavation in all types of soil which can be excavated with pick axes and crow bars and do not require blasting in all conditions such as dry, wet, slushy etc., including shoring, strutting and dewatering where ever necessary covering initial lead for foundations for finished item of work.
36
-
-
Filling with sand, below and sides of foundations and basement in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of all materials, labour charges, hire charges of T&P, all leads and lifts etc., complete for finished item of work as directed by the Engineer in charge.
6
-
-
Plain Cement Concrete in (1:4:8) proportion for leveling course in foundations using 40mm size HBG metal from approved quarry including cost and conveyance charges of cement and all other materials to site, all leads and lifts, seigniorage charges, dewatering, labour charges, machine mixing, laying concrete, ramming in 15 cm thick layers, finishing top surface to the required level, curing etc., complete for finished item of work as directed by the Engineer in charge.
9
-
-
Random Rubble stone Masonry in CM(1:6) using Hard granite stones from approved quarry including cost and conveyance charges of cement and all other materials to site and including cost of seigniorage charges, labour charges for cutting stones to required size and shape, mixing of cement mortar, dewatering charges, scaffolding, curing , all leads and lifts etc complete for finished item of work as directed by the Engineer in charge .
53
-
-
Brick masonry for walls in super structure with CM(1:6) using local made bricks of approved quality from approved source having minimum crushing strength of 35 Kg/cm2 including cost and conveyance charges of cement and all materials to site, seigniorage charges etc. complete for finished item of work as as directed by the Engineer in charge .
30
-
-
Flush pointing with CM(1:3) to CR stone masonry including cost and conveyance charges of cement and all other materials to site, scaffolding charges, seigniorage charges, incidental and operational charges, all labour charges for mixing mortar, finishing, all leads and lifts, curing, cutting grooves etc., complete for finished item of work and as directed by the Engineer in charge.
72
-
-
Plastering 12 mm thick in one coat for superstructurefor even faces of walls with CM(1:5) with smooth finish at all heights including cost and conveyance charges of cement and all other materials to site, scaffolding charges, seigniorage charges, incidental and operational charges, all labour charges for mixing mortar, finishing, all leads and lifts, curing, cutting grooves etc., complete for finished item of work and as directed by the Engineer in charge.
100
-
-
Total for SS 4 (Construction of approach road retaining wall, leveling of site etc.)
-
-
-
Description of Item
-
-
-
Providing of 150 mm dia DTG Rig borewell at Substation site.
-
-
-
Cost towards drilling of borewell 6" dia with power rig clear in all stratas hard rock, loose soils over harden reaming the bore to suit 150 mm bore well casing pipe and flushing the bore at an average pressure of 100 psi and inserting the casing pipe fixing the coupling conducting yield test including transporting, ground water survey.
170
-
-
Supply of Casing with heavy duty PVC rigid pipe of 160mm dia double socket PVC/SWR pipe 6Kg/Sq.cm - Prince / Sudhakar / Kisan / Supreme or any other ISI Brand including cost and conveyance of materials, labour charges, leads and lifts etc., complete for finished item of work as directed by the Engineer - In - charge
30
-
-
Supply and erecting, ISI mark submersible 2.0 HP, Single Phase 25 stages pumpset suitable for 106 / 156mm dia borewell with high quality water resistant and dynamically balanced bronze impeller with stainless steel shaft sleeves, pump coupling and pivot of Single phase 250V , 50Hz.. A.C. power supply copper winding with water proof insulation and high precision strength not to be effected by chemical in water and suitable bronze bearings with nut and bolts etc., with necessary H-type clamp of suitable size and strength including Direct - on - Line LTLK / SIEMENS / CROMPTON make starters fitted in sheet metal box size of 265 x 295 x 110mm suitable enclosure for single phase motors up to 3 HP at 220V 50Hz operating range between 80 to 240 Volts with starting and running capacitors assembled with ISI mark contactors and fitted with Legrand make MCB, all operational and incidental charges complete for finished item work with apnel board as directed by the Engineer-in-charge.
1
-
-
Supply of 3 Core 4.0 Sqmm Flat Copper cable as per IS 694:1990 for Submersible Motors of makes Finolex/ Polycab / Gold Medal / Million / Havells / GM / RPG including cost and conveyance of all materials and labour Charges complete for finished item work as directed by the Engineer-in-charge.
180
-
-
Supply of Polyethylene water storage tank double layer conforming to IS:12701 - 1996 of 1000 Ltr capacity with lid including cost and conveyance of all materials, labour charges etc., complete for finished item of work
1
-
-
Supply of 32mm dia PE 80 Grade material 12.5 kg / Cm2 ISI Mark HDPE pipe upto 600 feet
Makes : Sudhakar / Reliance / Duroline / Premier / Vijaya / Godavari. including cost and conveyance of all materials, labour charges, leads and lifts etc., complete for finished item of work as directed by the Engineer - In - Charge
165
-
-
Supply and fixing of different dia.Unplasticised PVC Pipes,10 kg/cm2 for potable water supplies conforming to IS : 4985/2000 (third revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color including Labour charges for laying, fixing, and commissioning the pipes including couplers, bends, plugs, junctions, tees etc. with solvent jointing as per Standard practice for finished item work as directed by the Engineer-in-charge.
-
-
-
32mm dia UPVC pipe
60
-
-
25mm dia UPVC pipe
50
-
-
Supply and fixing of GM Gate ( GM peet) valves as per IS 778 Class I -Indian make heavy type of different sizes including cost and conveyance of all materials and labour Charges complete for finished item work as directed by the Engineer-in-charge.
-
-
-
32 mm GM Gate valve
1
-
-
25 mm GM Gate valve
2
-
-
Total for SS 5 (Providing of Borewell)
-
-
-
Description of Item
-
-
-
Earth work excavation (alround) in foundations for building, septic tank, water sump and for levelling and depositing the earth on banks with a initial lead of 10 mt and a lift of 2 mt in mixture of gravel, soft disintegrated rock like shales, ordinary gravel, stony earth and earth mixed with fair sized boulders including shoring, shuttering, sheet planking and dewatering with all leads and lifts, tools and plants, labour, disposal of excess excavted earth etc., complete for finished item of work as directed by the Engineer in charge.
7.6
-
-
Supply and filling in the foundations and basement with sand, including watering and consolidation thoroughly in 150 mm layers. (including seigniorage charges)
1.59
-
-
Plain Cement Concrete in (1:4:8) proportion for leveling course in foundations using 40mm size HBG metal from approved quarry including cost and conveyance charges of cement and all other materials to site, all leads and lifts, seigniorage charges, dewatering, labour charges, machine mixing, laying concrete, ramming in 15 cm thick layers, finishing top surface to the required level, curing etc., complete for finished item of work as directed by the Engineer in charge.
1.71
-
-
Random Rubble stone Masonry in CM(1:6) using Hard granite stones from approved quarry including cost and conveyance charges of cement and all other materials to site and including cost of seigniorage charges, labour charges for cutting stones to required size and shape, mixing of cement mortar, dewatering charges, scaffolding, curing , all leads and lifts etc complete for finished item of work as directed by the Engineer in charge .
2.36
-
-
Brick masonry for walls in super structure with CM(1:6) with Bricks with traditional size 23 x 11 x 7 cms from approved source having including cost and conveyance charges of cement and all materials to site, seigniorage charges etc. complete for finished item of work as as directed by the Engineer in charge.
3.8
-
-
Providing of roofing with 0.63 mm thick Galvanired/ Prepainted G.I. Profiled sheets fixed to the purlins with 14 size self drilling screws with neoprene washers side laps are stitched with self tapping/drilling screws. End laps are to be sealed with 25x3mm. Butyl tape. The sheets are provided with anti capillary grove.
4.81
-
-
Supply and fixing of MS Pipe 32mm dia including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as directed by the Engineer-in-Charge.
8
-
-
Supply and fixing of RCM jali-50mm thick including cost and conveyance of all materials and labour charges etc.complete
0.36
-
-
Plastering 20mm thick one coat for super structure for ODD faces of walls with in CM (1:5) finishing including cost and conveyance of all materials, seignoirage charges, operational, incidental, labour charges such as scaffolding, mixing curing leads, lifts etc., complete for "UNEVEN FACES OF WALLS"
20.1
-
-
Plastering 12 mm thick in one coat for superstructure for "EVEN FACES OF WALLS" with CM(1:5) with smooth finish at all heights including cost and conveyance charges of cement and all other materials to site, scaffolding charges, seigniorage charges, incidental and operational charges, all labour charges for mixing mortar, finishing, all leads and lifts, curing, cutting grooves etc., complete
13.1
-
-
Flooring with Anti skid ceramic floor tiles, 7.3mm thick 1st quality of approved shades set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete for finished item of work.
2.3
-
-
Dadooing in toilets and bath rooms with glazed red or white full body ceramic wall tiles of size 200 x 300 mm / 245 mm x 325 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM(1:3) 12 mm thick with neat cement slurry of honey like consistency spread at the rate of 3.3 Kgs per Sqm and filling the joints with white cement paste mixed with pigment of matching shade is to be done including cost and conveyance charges of cement and all other materials to site, seigniorage charges, incidental and operational charges, all labour charges for mixing mortar, finishing, all leads and lifts, etc., complete for finished item of work and as directed by the Engineer in charge.
9.24
-
-
Supply and fixing of Bisonlam doors to be provided for Toilets, Bath rooms with door frame of well seasoned country wood ( preferably neem tree) of cross section 100x75mm and shutter shall be made of 10mm thick bison panel with PVC beading 40mm width all-round and Shutter and frame duly painted with two coats of synthetic enamel paint of approved colour over one coat of primer. Fixtures and fittings 1no aluminium aldrop 250 mm, 2nos aluminium tower bolts 250 mm, 3nos aluminium hinges100mm, 2nos aluminium handles150mm, 4 nos hold fasts. The quoted rate shall include cost and conveyance of the materials, fixing, labour charges, tools, handles, locking arrangements, and other fixtures & fittings etc. complete for finished item of work as directed by the Engineer-in-charge.
-
-
-
Door Frame section of 63.5x100 MM .The two Vertical members are to be joined together with the horizontal member using 8x75MM long MS Star full thread screws etc., rate vide item code BMT-N.83.C (Rs.805.00x0.70=563.50)
1.5
-
-
Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame including labour charges, 4Nos 125mm aluminium butt hinges, 1No 250mm aluminium aldrop, 1No 200mm aluminium tower bolt, 2Nos 150mm aluminium handles etc., complete for finished item of work as directed by the Engineer in charge.
1.91
-
-
Supplying and fixing 580 mm x 440 mm size colour glazed orissa pan of W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware/ Parryware/Neycer - ISI Mark: including cost and conveyance of water closet, P or S trap and all other materials, labour charges for fixing etc., complete for finished item of work as directed by the Engineer in charge of work.
1
-
-
Supply and fixing of CP Short body bib cock fancy type delux heavy duty 12.7mm dia Indian make Seiko / Senior / Nice or equivalent including cost and conveyance of all materials, labour charges etc., complete for finished item of work as directed by the Engineer - In - Charge
2
-
-
Supply and fixing of 25mm G.I. Pipe nominal bore GI pipe medium grade properties and weight as per IS 1239 with GI fittings including the cost of pipe and its fittings and labour charges complete.
12
-
-
White washing two coats with Surya cem of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work.
34
-
-
Supply and fixing of Kadapa slabs of 40mm thick for racks including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as directed by the Engineer-in-Charge.
0.95
-
-
Septic Tank
-
-
-
Supply and Fixing of RCC Rings, RCC Lid 1.22mt. dia and packing the joints neatly with CM (1:3) 12mm thick Inculding C/c all materials and labour charge etc., complete
-
-
-
1.22mt. Dia Rings
8
-
-
1.22mt. Dia Lid
1
-
-
Cement Tubs
2
-
-
Supplying & fixing in walls,ground different dia PVC Pipes of Prince or sudhakar or equivalent make for sewer lines including cost and conveyance of PVC Pipes, specials, PVC cowls labour charges etc complete.
-
-
-
a) Vent Pipe 75mm dia
2.5
-
-
b) 110mm dia.PVC Pipe
6
-
-
Total for SS 6 (Construction of Toilet)
-
-
-
Description of Item
-
-
-
Detailed survey and tree clearance
0.6
-
-
Supply & Erection of 9.1M long 280Kg working load PSCC poles including transport, loading, unloading and pit excavation (pit size 0.6X0.6X1.5Mtrs.) in all soils except which require blasting as per specification (excluding cost of pole concreting) inlcuidng loading & unloading, transportation upto 3KM on average from stock point to work spot.
4
-
-
Supply & Erection of 12.5 Mt Spun poles including transport, loading, unloading and pit excavation (pit size 0.9 X0.9 X2.1 Mtrs.) in all soils except which require blasting as per specification (excluding cost of pole concreting) inlcuidng loading & unloading, transportation upto 3KM on average from stock point to work spot.
12
-
-
Supply & Erection of 1.53Mts V 'X' arms/ chanel cross arm,(with 100x50mm MS Channel) bolts and nuts and clamps complete as per specification (excluding top cleat)
26
-
-
Supply & Erection of 33 KV Top Cleat with clamp
12
-
-
Supply and erection of 33 KV side arm with strut with 100X50X6 mm MS Channel & 65x65x6 mm MS Angle including cost of materials, bolts & nuts.
2
-
-
Supply and erection of special clamps made up of 75X8 mm MS Flat including cost of materials, bolts & nuts.
16
-
-
Supply and erection of 33KV T Channel set with 100X50mm MS Channel & 65X65X6mm MS Angle including cost of materials, bolts & nuts.
2
-
-
Supply and erection of 33KV Tapping cross arm set (7.5 ft long channel cross arm each) including fabrication, Cutting & erection complete with 100X50mm MS Channel & 50X50X 6mm MS Angle including cost of materials, bolts & nuts.
5
-
-
Supply and erection of 33KV polymer pin insulators with GI pin
36
-
-
Supply and erection of 33KV 70KN composite polymer insulator set & Hard ware as per specification
48
-
-
Supply & Erection of Stay set complete including fixing of bow, fixing and binding of eye bolts, anchor roads, guy insulators including concreting and pit excavation in all soils except which require blasting as per specification (excluding concreting)
1
-
-
Sprial earth coil
22
-
-
Cement concrete (1:4:8) using 40mm size well graded, HBG metal including cost of all materials and curing dewatering the pits before and after concreting viz., dry, wet, partially submerged, fully submerged, rocky etc., complete for PSCC pole as per specification where ever necessary as per the department instructions.
-
-
-
Concreting of Pit size: 0.6X0.6X1.5Mtrs. With Cc(1:4:8) using 12mm HBG metal
1
-
-
Concreting of Pit size: 0.6X0.6X1.5Mtrs. With Cc(1:4:8) using 40mm HBG metal
2
-
-
Stay Concreting of Pit size: (0.45 Mt X 0.45 MtX 1.35 Mt) ( Where ever essential) with Cc (1:3:6) using 20 mm and 12mm HBG
1
-
-
Paving out AAA Conductor and stringing duly arranging temporary guys, jointing, clamping, jumpering, pin binding, tensioning and strain insulators binding etc., on the poles maintaining ground clearances as per specification including transport from district stores, including transport, loading and unloading charges including providing of double jumpers at cut point
-
-
-
150 sqmm AAA Conductor
1.85
-
-
Numbering of poles with AC black paint as back ground and white paint for numbering complete as per specification.
22
-
-
Total
-
-
-
Description of Item
-
-
-
Detailed survey and tree clearance
3.81
-
-
Supply & Erection of 9.1M long 280Kg working load PSCC poles including pit excavation (pit size 0.6X0.75X1.5Mtrs.) in all soils except which require blasting as per specification (excluding cost of pole concreting) inlcuidng loading & unloading, transportation upto 3KM on average from stock point to work spot.
91
-
-
Supply & Erection of 8.0 Mt PSCC poles including transport, loading, unloading and pit excavation (pit size 0.6mx0.6mx1.5 Mtrs.) in all soils except which require blasting as per specification (excluding cost of pole concreting) inlcuidng loading & unloading, transportation upto 3KM on average from stock point to work spot.
23
-
-
Supply & Erection of 1.07Mts V 'X' arms/ chanel cross arm with back clamp and bolts and nuts complete as per specification inlcuidng loading & unloading, transportation upto 3KM on average from stock point to work spot.
131
-
-
Supply & Erection of 11 KV Top Cleat with clamp for 9.1Mtrs. PSCC poles complete as per specification inlcuidng loading & unloading, transportation upto 3KM on average from stock point to work spot.
71
-
-
Supply and erection of 11 KV side arm with strut with 75X40X6 mm MS Channel & 50X50X6 mm MS Angle including cost of materials, bolts & nuts complete as per specification inlcuidng loading & unloading, transportation upto 3KM on average from stock point to work spot.
6
-
-
Supply and erection of special clamps made up of 50X6 mm MS Flat including cost of materials, bolts & nuts complete as per specification inlcuidng loading & unloading, transportation upto 3KM on average from stock point to work spot.
157
-
-
Supply and erection of Double-pole structure with 11 Mts long spun poles and 4 Nos 9.1 Mts PSCC Poles as stuts including pit excavation in all soils, back filling, bracing sets, 40 mm dia 2.5 Mtr. GI pipe earthing, running of earths and Disc insulators and hardware complete as per drawing (excluding base concreting & Stay concreting) (as per clause 13.1 of technical specification 33KV & 11KV lines of Section-5).
1
-
-
Supply and erection of 11KV polymer pin insulators with GI pin complete as per specification inlcuidng loading & unloading, transportation upto 3KM on average from stock point to work spot.
224
-
-
Supply and erection of 11KV 45KN composite polymer insulators & Hard ware complete as per specification inlcuidng loading & unloading, transportation upto 3KM on average from stock point to work spot.
236
-
-
Supply & Erection of Stay set complete including fixing of bow, fixing and binding of eye bolts, anchor roads, guy insulators and pit excavation in all soils except which require blasting complete as per specification inlcuidng loading & unloading, transportation upto 3KM on average from stock point to work spot.(excluding concreting)
23
-
-
Cement concrete (1:4:8) using 40mm size well graded, HBG metal including cost of all materials and curing dewatering the pits before and after concreting viz., dry, wet, partially submerged, fully submerged, rocky etc., complete for PSCC pole as per specification where ever necessary as per the department instructions.
-
-
-
Concreting of Pit size: 0.6X0.6X1.5Mtrs. With Cc(1:4:8) using 12mm HBG metal
5
-
-
Concreting of Pit size: 0.6X0.6X1.5Mtrs. With Cc(1:4:8) using 40mm HBG metal
5
-
-
Stay Concreting of Pit size: (0.45 Mt X 0.45 MtX 1.35 Mt) ( Where ever essential) with Cc (1:3:6) using 20 mm and 12mm HBG
2
-
-
Paving out 100 Sq.mm AAA Conductor and stringing duly arranging temporary guys, jointing, clamping, jumpering, pin binding, tensioning and strain insulators binding etc., on the poles maintaining ground clearances complete as per specification inlcuidng loading & unloading, transportation upto 3KM on average from stock point to work spot.
12
-
-
Numbering of poles with AC black paint as back ground and white paint for numbering complete as per specification inlcuidng loading & unloading, transportation.
114
-
-
Total
-
-
-
Description of Item
-
-
-
Supply & Erection of 9.1M long 280Kg working load PSCC poles including transport, loading, unloading and pit excavation (pit size 0.6X0.6X1.5Mtrs.) in all soils except which require blasting as per specification (excluding cost of concreting of pole) (Wherever necessary as per the field conditions)
11
-
-
Supply & Erection of 8.0 Mt PSCC poles including transport, loading, unloading and pit excavation (pit size 0.6mx0.6mx1.5 Mtrs.) in all soils except which require blasting as per specification (excluding cost of pole concreting) inlcuidng loading & unloading, transportation upto 3KM on average from stock point to work spot.
8
-
-
Supply & fixing of LT 3-Ph 5W cross arm ( 50x50x6 mm MS Angle ) with suitable back clamp made up of 50X6mm MS flat on erected 9.1 Mtr. PSCC pole for 3-Ph 5W line including cost of bolt & nuts and washers etc.
95
-
-
Supply & fixing of LT 3-Ph 5W side arm with stuts ( 50x50x6 mm MS Angle ) with suitable back clamp made up of 50X6mm MS flat on erected 9.1 Mtr. PSCC pole for 3-Ph 5W line including cost of bolt & nuts and washers etc.
5
-
-
Supply and fixing of LT Pin and insulators with GI pins double nuts & double washers on erected LT cross arm.
284
-
-
Supply and fixing of LT shacke insulators with metal parts double nuts & double washers on erected LT cross arm.
144
-
-
Supply & Paving out 55Sq.mm AAA Conductor and stringing duly arranging temporary guys, jointing, clamping, jumpering, pin binding, tensioning and strain insulators binding etc., on the poles maintaining ground clearances as per specification including transport from district stores, including transport, loading and unloading charges including providing of double jumpers at cut point
15.5
-
-
Total
-
-
-
Description of Item
-
-
-
Supply and erection of 11KV 200Ams Tilting type AB Switch with polymer insulators complete as pert the standerds
38
-
-
Supply and erection of 11KV HG Fuse set with GI with complete as pert the standerds
38
-
-
LT double circuit Distribution box with MCB of 100 Amps
38
-
-
Supply and erection of CI pipe 80mm dia/2.5 Mts including pit excavation, back filling, betonite powder and cement collar of dia2'x1' height etc., complete earth oipe 80mm dia 2.5Mt long complete as per the standers
38
-
-
Supply and erection of GI pipe 80mm dia/2.5 Mts including pit excavation, back filling, betonite powder and cement collar of dia2'x1' height etc., complete earth oipe 80mm dia 2.5Mt long complete as per the standers
76
-
-
Supply and running of of GI No 8 wire from DTR, AB Switch, HG Fuse set, V/X cross arm etc., including double earthing as per specification for running of total 10 Nos wires.
38
-
-
Supply and Wiring (LT) of 3 phase 160 KVA DTR with LT PVC Single core cable of 185 Sqmm from DTR to LT Fuse set and LT Fuse set to line (Double Feeder) including cost of lugs, Bult & nuts etc.
3
-
-
Supply and Wiring (LT) of 3 phase 100KVA DTR with LT PVC Single core cable of 120 Sqmm from DTR to LT Fuse set and LT Fuse set to line (Double Feeder) including cost of lugs, Bult & nuts etc.
35
-
-
Erection of 3Ph 160/100 KVA DTR on pole mounted structure without casuing and damage to bushing including abour and transport complte including earthing as per standerds with material (Excluding cost of DTR)
38
-
-
Construction of DTR plints size 4'x4'x6'( above ground) and 4'x4'x3' (below ground) with brick masonry/RR masonry wall - Excavation of pit size of 4'x4'x3', laying bed concrete with CC(1:4:8) using 40mm and 20mm HBG metal for 6'' depth, Construction of DTR plinth with9'' thick 8'' height brick masonry wall in CM (1:6) all-round filling the hollow portion with sand, laying of 6'' thick PCC(1:3:6) using 20mm and 12mm HBG metal on top and plastering all-round the outer side of wall with CM(1:5) 12mmthick and white washing two coats, including cost and transport of all materials
38
-
-
Total
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements