Andhra Pradesh Capital Region Development Authority Tender

Civil work;Supply, Transportation, Laying, testing and commisisoning of 4Cx1.5 sqmm PVC insulated and sheathed FRLS copper round cable for voltage up to 1100V as per IS 694/1990 etc complete in existing hume pipe/trench/cable tray with necessary fixing arrangments as required (as directed by departmental official) complete including labour charges sheathed FRLS copper round cable for voltage up to 1100V as per IS 694/1990 etc sutiable for communication between indoor and outdoor units connected to VRF system. Makes: Finolex / RR kabel / Havells /KEI/Polycab/ Gloster/Goldmedal/GM.

Civil work;Providing 2 runs of 1/2" x 1/4" Copper tubes for suction and liquid between indoor and outdoor unit for split/Casseete Air- Conditioner including foaming etc., complete. Make: Copper:Totaline /Nippon /Mandev. Nitrile Insulation: Kflex/ Totaline /Armaflex

Civil work;Supply, installation and testing of 25mm dia UPVC Drain Piping with 6mm Nitrile Rubber class "O" Insulation covered with interwoven glass cloth protection. Necessary pipe fittings(Including enlarger, bends, T Joints etc) has to be considered to connect the UPVC drain pipe to cast iron floor trap.

Civil work;Installation of 1.5 TR / 2TR Split Air Conditioners.

Civil work;Supply of 2.0 TR 5 Star capable of delivering 24000 BTU/hr and above with operating on refrigerant R-410A / R32, INVERTER Model Cool type split AC unit with high wall mounted Single Split indoor unit and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord with cordless remote control etc., dual barrier coating in order to protect coil form oxidigation. Makes: Blue star IC524DBTU / Hitachi / Daikin/Carrier Emperia Nxi. or equivalent make/model as approved by the competent authority.

Civil work;Supply of 1.5 TR 5 star capable of delivering 18000 BTU/hr and above with operating on refrigerant R-32/ R-410A, COP not less than 4.5, INVERTER Model Cool type split AC unit with high wall mounted Single Split indoor unit and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord with cordless remote control etc., dual barrier coating in order to protect coil form oxidigation. Makes: Blue Star IC718DCTU / Daikin FTKG50TV16U / Hitachi/Carrier Emperia Nxi / LG-Q18KNZA or equivalent make/model as approved by the competent authority.

Civil work;Supply installation testing and commisioning 6 fiber Outdoor, steel tape armoured multimode[62.5/125um ] glass Fiber Optic Cable as per latest ammendments of TIA /EIA 568B.3 , GR 20 CORE/ UEC 794-1/ EN 187000 Standards in existing MS/PVC Conduits/ hume pipe including making terminations to active passive equipments with ferruling at both ends for identification with necessorry tools for Terminations and testing required.Makes:Systimax/Legrand/Molex/Panduit/Siemond/AMP or equivalent make as approved by the competent authority.

Civil work;Supply,laying ,testing and commisioning of 4-pair, Cat6 UTP Solid (Third party ETL Intertek tested 600 MHZ above) to support 1Gbps with Cross (+) filler pair seperator & PVC sheath 23 AWG, STP/UTP Cable , Meets or exceeds ANSI/TIA-568-C.2 and UL Listed &RoHS Compliant in the existing raceways /pvc conduits including making connections to information outlets and patch panels with ferruling at both ends for identifiation with necessary tools for punching stripping crimping and testing required etc., complete. Makes: Systimax /AMP/ Panduit/ Siemond/Molex/Legrand or equivalent make as approved by the competent authority.

Civil work;Supply,Transportation and laying of Outer dia 63mm and Inner dia 51mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II having corrugation on the outer wall and plain surface inner wall complete with necessary HDPE fittings for protection of 1.1 KV grade U.G cable directly in ground at a depth of 60Cms including excavation and refilling the trench as required. Makes:DURA LINE (Dura Guard) or its equivalent make as approved by the competent authority.

Civil work;Supply and Fixing of 25mm ISI mark (2.0 -2.20)mm thickness outer dia medium grade with IS:9537 part 3 FRLS regid PVC pipe with all accessories required for fixing on ceiling/wall/laying on cable trays/ c channel supports for point/data/network/ddc/bms cables including all labour charges etc., complete. Makes : Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar/Polycab/Anchor/ Polyline/ Orbit/AKG/Beljin or equivalent make as approved by the competent authority.

Civil work;Supply and Fixing of 20 mm ISI mark (1.95 - 2.10)mm thickness outer dia heavy grade with IS:9537 part 3 FRLS regid PVC pipe with all accessories required for fixing on ceiling/wall/laying on cable trays/ c channel supports for point/data/network/ddc/bms cables including all labour charges etc., complete. Makes : Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar/Polycab/Anchor/ Polyline/ Orbit/AKG/Beljin its equivalent make as approved by the competent authority.

Civil work;Supply and fixing of 20W,2000 lumens T8, , not less than 1100 mm length LED retrofit tube light with aluminium anodised body, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete. as per IS 10322 (Part 5/ Sec 1)..2012 Makes: a) LUMINAIRE MAKE : Phillips / GE- Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready// Rhino/Panasonic b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG. or equivalent make/model as approved by the competent authority.

Civil work;Supply and fixing of 12W LED Slim Panel Round /Square suitable for Recessed / Surface mounting made of diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltaGE-Venture ranGE-Venture of 150 to 265 Volts AC, P.F > 0.9, SurGE-Venture protection: 2KV,THD<10%, with high power LED's having efficacy of > 100 lumins/watt,CCT: 3000K - 5700K, minimum CRI>70, .etc., complete. Makes : a) LUMINAIRE MAKE : Phillips / GE- Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready/ FortuneArrt/ Rhino/Panasonic b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/Everlight or equivalent make/model as approved by the competent authority.

Civil work;Supply and fixing of 15W LED Slim Panel Round /Square suitable for Recessed / Surface mounting made of diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltaGE-Venture ranGE-Venture of 150 to 265 Volts AC, P.F > 0.9, SurGE-Venture protection: 2KV,THD<10%, with high power LED's having efficacy of > 100 lumins/watt,CCT: 3000K - 5700K, minimum CRI>70, .etc., complete. Makes : a) LUMINAIRE MAKE : Phillips / GE- Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready/ FortuneArrt/ Rhino/Panasonic b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/Everlight or equivalent make/model as approved by the competent authority.

Civil work;Supply and fixing of 24W LED Slim Panel Round /Square suitable for Recessed / Surface mounting made of diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltaGE-Venture ranGE-Venture of 150 to 265 Volts AC, P.F > 0.9, SurGE-Venture protection: 2KV,THD<10%, with high power LED's having efficacy of > 100 lumins/watt,CCT: 3000K - 5700K, minimum CRI>70, .etc., complete. Makes : a) LUMINAIRE MAKE : Phillips / GE- Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready/ FortuneArrt/ Rhino/Panasonic b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/Everlight or equivalent make/model as approved by the competent authority.

Civil work;Supply and erecting 19/20mm steel tube down rod ofrequired length with bolts & nuts duly painted with matching colour of fan etc complete as directed by Engineer In Charge for finished item of work.

Civil work;Design, fabrication, assembling, wiring, supply, testing at factory, packaging, forwarding to site, Installation, testing and commissioning of Indoor Cubicle type LT panel, fabricated out of 14 gauge CRCA sheet steel in cubicle formation, compartmentalized, Form 4B construction suitable for 415 V 3 phase 4 wires 50 Hz AC supply system fabricators in compartmentalized preferable design from CRCA sheet steel of 2mm thick for frame work and covers,3 mm thickness for Gland plates i/c cleaning and finishing complete with 7 Tank process for powder coating approved shade,TPN Aluminium alloy busbars of high conductivity, protection, free standing, floor mounting, dust and vermin proof ,indoor, entire panel shall having a common aluminium earth bar with 2 Nos earthing terminals, Alumnium bus bar and control wiring with 2.5 sqmm PVC Insulated copper conductor S/C Cable. extensible on both sides, interconnections with suitable size of indicating lamps etc. as required. with 1 set of CBCT, ELR etc are required. Lifting hooks shall also be provided in case of large panels. Approval shall be taken for each panel in the form of shop drawings before fabrication. Galvanised hardwares with zinc passivation shall be used in fabrication of panels. MP based release to be provided for above 250A breakers including suitable rated APFCR modules inbuilt as required. INCOMER- 1 Nos. 250A 4 Pole MCCB,36 KA, Incomer shall have one set of the following items: All incoming Muiltifunction meters shall be 45 days energy recording type Intelligent multi function digital meter of suitable range to read V,A,KVA, KVAH, KWAH, KW, KVAR, PF, Hz etc with communication facility display with required Nos CTs, 15 VA, class 0-5 and control circuit wiring with HRC control fuses.CTs for APFCR .Digital Voltmeter suitable range for 3 phase, 4 wire operation with LED display and built-in selector switch along with 3 nos of MCB control.1 Set of Indication Lamps, LED type, R,Y,B and -All Meters with RS 485 port-With suitable Surge Protection Device (SPD) & space heater for chambers as required-Bus Bars-400 Amps (Extendible type for future purpose on both sides)- Outgoings-1 Nos of 160A MCCB, 4P, 25 kA, 2 Nos of 125A MCCB, 4P, 25 kA , 6 Nos. MCB, 63A, 4P, 16 kA, 1 no. of Microprocessor based intelligent power factor correction relay having sensitivity up to 50 milli Amp secondary current and 6 to 14 stage self analysing auto c/k setting according to targeted power factor setting, the relay shall have minimum three digit display unit for display of real power factor, targeted power factor, lag/lead capacitor switching status, alarm output for under current, over current, insufficient compensation, indication of switching on units, auto/manual status, and shall have over load protection, no volt release etc. as required. 2 nos of 15kVAR and 2 nos of 10kVAR, Heavy duty Three phase 440 V , 50 Hz capacitor (Bank) self healing MPP/MP type shunt capacitor (banks) conforming to IS:13340-41 / IEC :831-1&2 in existing panel or parallel with load terminals , the capacitor shall be fitted with discharge resistors, pressure sensitive disconnector ( PSD ) and shall have dissipation factor less than 0.0025 at 50 Hz and total wattage loss less than 0.5 Watt per KVAR. including making connections with suitable capacity conductors/cables testing as required. 440 Volt 3 pole capacitor (AC 6 B ) duty contactor with 3 no. early make and post break auxiliary contacts in series with quick dischargedamping resistors/ reactors to limit the inrush current ,conforming to IS:13947-4-1/IEC:947-4-1, Din rail mounting type ncluding making onnections, testing etc. as required. suitable for the above capacity capacitor banks (i.e up to 50kVAR) 4 Sets of Indicating lamps (LED type) for capacitor ON (Green) & capacitor OFF (Red) -Complete in all respect including all interconnections from the bus bars to MCB and MCB to contactor and contactor to terminal blocks of Capacitor. Automatic Switching "ON" and "OFF" capacitor panel described as above & 1 Lot of control wiring, push button, space heater & thermo start, 1 Set of designation plates complete etc as required for finished item of work as directed by Engineer-In-Charge. Note: The sizing of the panel & its design shall be submitted by contractor as per site conditions and the same shall be approved by the competent authority.

Civil work;Supply and fixing of 2 Module Modular type Electronic step type Fan Regulator including connection etc as required and as directed by Engineer In-Charge. Makes: Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA) or equivalent make as approved by the competent authority.

Civil work;Supply and fixing of 20A Modular Socket with shutter including connection etc as required and as directed by Engineer In-Charge. Makes: Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA) or equivalent make as approved by the competent authority.

Civil work;Supply and fixing of 16A/6A 1 way Combi Socket Modular Socket with shutterr including connection etc as required and as directed by Engineer In-Charge. Makes: Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA) or equivalent make as approved by the competent authority.

Civil work;Supply and fixing of 20A 1 Way 1 Module Modular Switch with Indicator including connection etc as required and as directed by Engineer In-Charge. Makes: Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA) or equivalent make as approved by the competent authority.

Civil work;Supply and fixing of 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter (universal socket or normal standard socket) including connection etc as required and as directed by Engineer In-Charge. Makes: Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA) or equivalent make as approved by the competent authority.

Civil work;Supply and fixing of 6A / 10A 1 Way 1 Module Modular Switch including connection etc as required and as directed by Engineer In-Charge. Makes: Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA) or equivalent make as approved by the competent authority.

Civil work;Supply and fixing of 12 Modular Hot Dip galvanized 20/18 SWG Module box with earthing terminal / PVC box with 12 Modular Cover Frame in front on surface or in recess including connection, painting etc as required and as directed by Engineer In-Charge. Makes: Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA) or equivalent make as approved by the competent authority.

Civil work;Supply and fixing of 8 Modular Hot Dip galvanized 20/18 SWG Module box with earthing terminal / PVC box with 8 Modular Cover Frame in front on surface or in recess including connection, painting etc as required and as directed by Engineer In-Charge. Makes: Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA) or equivalent make as approved by the competent authority.

Civil work;Supply and fixing of 6 Modular Hot Dip galvanized 20/18 SWG Module box with earthing terminal / PVC box with 6 Modular Cover Frame in front on surface or in recess including connection, painting etc as required and as directed by Engineer In-Charge. Makes: Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA) or equivalent make as approved by the competent authority.

Civil work;Supply and fixing of 4 Modular Hot Dip galvanized 20/18 SWG Module box with earthing terminal / PVC box with 4 Modular Cover Frame in front on surface or in recess including connection, painting etc as required and as directed by Engineer In-Charge. Makes: Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA) or equivalent make as approved by the competent authority.

Civil work;Supply and fixing of 3 Modular Hot Dip galvanized 20/18 SWG Module box with earthing terminal / PVC box with 3 Modular Cover Frame in front on surface or in recess including connection, painting etc as required and as directed by Engineer In-Charge. Makes: Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA) or equivalent make as approved by the competent authority.

Civil work;Supply and fixing of 1or 2 Modular Hot Dip galvanized 20/18 SWG Module box with earthing terminal / PVC box with 1 or 2 Modular Cover Frame in front on surface or in recess including connection, painting etc as required and as directed by Engineer In-Charge. Makes: Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA) or equivalent make as approved by the competent authority.

Civil work;Supply and fixing of 12" (300mm) Light duty exhaust fan with metalic blades and wire guard, including transportation and giving connections etc, complete.Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DB / Orient hill air/Halonix /Polycab/ G.M. (Xenix) or equivalent make as approved by the competent authority.

Civil work;Supply and fixing of 48" (1200mm) Sweep 5 star rated Ceiling Fan , with double ball bearings, air delivery more than 200 cubic meter/min but without Regulator including transportation and giving connections etc, complete. Makes : Crompton HS Plus / Havells ES Neo/Orient Energy Star/ Halonix(Zephyr)/Polycab(Synergy Star) / G.M. (Air Wave Premium) or equivalent make as approved by the competent authority.

Civil work;Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete. Makes: a) LUMINAIRE MAKE : Phillips / GE- Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/ Everlight or equivalent make as approved by the competent authority.

Civil work;Supply and run of 1 of 6.0 Sqmm FRLS/ FRLS-H / HFFR PVC insulated 1100V grade as per IS : 694 / 1990 specification for Copper cable in existing pipe for point wiring inlcuding all labour charges etc., complete..Makes:Finolex / RR kabel / Havells/KEI/Polycab/Gloster/Goldmedal/GM or equivalent make as approved by the competent authority.

Civil work;Supply and run of 3 of 4.0 Sqmm FRLS/ FRLS-H / HFFR PVC insulated 1100V grade as per IS : 694 / 1990 specification for Copper cable in existing pipe for point wiring inlcuding all labour charges etc., complete..Makes:Finolex / RR kabel / Havells/KEI/Polycab/Gloster/Goldmedal/GM or equivalent make as approved by the competent authority.

Civil work;Supply and run of 3 of 2.5 Sqmm FRLS/ FRLS-H / HFFR PVC insulated 1100V grade as per IS : 694 / 1990 specification for Copper cable in existing pipe for point wiring inlcuding all labour charges etc., complete..Makes:Finolex / RR kabel / Havells/KEI/Polycab/Gloster/Goldmedal/GM or equivalent make as approved by the competent authority.

Civil work;Supply and run of 3 of 1.5 Sqmm FRLS/ FRLS-H / HFFR PVC insulated 1100V grade as per IS : 694 / 1990 specification for Copper cable in existing pipe for point wiring inlcuding all labour charges etc., complete..Makes:Finolex / RR kabel / Havells/KEI/Polycab/Gloster/Goldmedal/GM or equivalent make as approved by the competent authority.

Civil work;Supply and Fixing of 32mm ISI mark (1.90 - 2.10)mm thickness outer dia medium grade with IS:9537 part 3 FRLS regid PVC pipe with all accessories fixing on ceiling/wall/laying on cable trays/ c channel supports etc including all labour charges etc complete. Makes : Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar/Polycab/Anchor/ Polyline/ Orbit/AKG/Beljin or equivalent make as approved by the competent authority.

Civil work;Supply and Fixing of 25 mm ISI mark (2.00 - 2.20)mm thickness outer dia heavy grade with IS:9537 part 3 FRLS regid PVC pipe with all accessories fixing on ceiling/wall/laying on cable trays/ c channel supports etc including all labour charges etc complete. Makes : Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar/Polycab/Anchor/ Polyline/ Orbit/AKG/Beljin or equivalent make as approved by the competent authority.

Civil work;Supply and Fixing of 20 mm ISI mark (1.95 - 2.10)mm thickness outer dia heavy grade with IS:9537 part 3 FRLS regid PVC pipe with all accessories required for fixing on ceiling/wall/laying on cable trays/ c channel supports etc including all labour charges etc., complete. Makes : Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar/Polycab/Anchor/ Polyline/ Orbit/AKG/Beljin or equivalent make as approved by the competent authority.

Civil work;Supply, Transportation, Laying, testing and commisisoning of 1C x 35 Sqmm PVC insulated and sheathed FRLS copper round cable for voltage up to 1100V as per IS 694/1990 etc complete on wall/ existing hume pipe/trench/cable tray with necessary fixing arrangments as required (as directed by departmental official) complete including labour charges.Makes: Finolex / RR kabel / Havells /KEI/Polycab/ Gloster/Goldmedal/GM or equivalent make as approved by the competent authority.

Civil work;Supply and providing of battery rack upto 20 to 30 batteries (65 & 100 AH)

Civil work;Supply and fixing of 12V 100 AH SMF battery with 3 years Warrenty, including wire leads ,connections etc complete., Makes: Quanta / Racket / Exide or equivalent make as approved by the competent authority.

Civil work;Supply installation Testing and commissioning of 20.0 KVA 312/360 V DC on line UPS system as per IEC 62040-I(Safety) ,IEC 62040-3(Performance) for critical IT solutions ,fully digital IGBT Converter and Inverter ,with Internal /External isolation transformer from DC to AC, PWM, pure sine wave output, double conversion ,output pf 0.9, with parallelling facility , standard communicaton features/options auto and manual static by pass switch three phase input / Three phase output. Accoustic level shall be less than 58dB at 1 mtr distance. Makes: Numeric/APC/Fuji Electric Consul Neowatt/Sakshham /Emerson or equivalent make as approved by the competent authority.

Civil work;Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium/Copper lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size 3.5C x 35 Sqmm Copper/Aluminium cable. Makes:Dowels/Comet/SMI or equivalent make as approved by the competent authority.

Civil work;Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium/Copper lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size 4C x 6/10/16 Sqmm Copper/Aluminium cable. Makes:Dowels/Comet/SMI or equivalent make as approved by the competent authority.

Civil work;Supply, Transportation, Laying, testing and commisisoning of 4C x 10 Sqmm XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)./1554-I in existing hume pipe/trench/cable tray/HDPE pipe/PVC conduit with necessary fixing arrangments as required (as directed by departmental official) complete including labour charges. Makes: Torent / Universal / Unicab / Havells / KEI / Gloster/Finecab / Polycab /RR Kabel or equivalent make as approved by the competent authority.

Civil work;Supply, Transportation, Laying, testing and commisisoning of 3.5C x 35 Sqmm XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)./1554-I in existing hume pipe/trench/cable tray/HDPE pipe/PVC conduit with necessary fixing arrangments as required (as directed by departmental official) complete including labour charges. Makes: Torent / Universal / Unicab / Havells / KEI / Gloster/Finecab / Polycab /RR Kabel or equivalent make as approved by the competent authority.

Civil work;Supply and fixing of 12 Way SPN DB with IP 43 suitable for 2 Nos 32A, & 6 Nos 25A,10kA S.P MCB out goings and for 1 No Incommer 63A FP MCB C/D Curve ISI Mark etc complete as per IS 8623; IS 13032; IEC 61439-3 including internal connection and labour charges for flush/surfacemounting etc., complete. Makes: A) DB-Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/Havells STADx/L&T-Newrange/Indo Asian-Opti Pro/ HPL (Techno) B) MCB- Legrand-DX3 / Schneider-A9/Hager-h3/ Siemens-5SX4/ Havells STADx /L&T-AU/Indo Asian-Opti pro/ HPL (Techno) or equivalent make as approved by the competent authority.

Civil work;Supply and fixing of 8 Way VTPN DB with IP 43 Protection suitable for accomodating along with 125A 4 Pole MCCB as incomer and 4 Nos 40-63A TP MCB, 12 Nos 6-32A TP MCB as outgoing etc., as per IS 8623; IS 13032; IEC 61439-3 including internal connection and labour charges for surface mounting etc., complete. Makes: A) DB-Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/Havells STADx/L&T-Newrange/Indo Asian-Opti Pro/ HPL (Techno) B) MCCB- L&T- D shine / Schneider-CVS/Legrand ?(DP X3/DRX)/ Siemens- 3VL / Hager-h3/C&S Winbreak/HPL-Techno C) MCB- Legrand-DX3 / Schneider-A9/Hager-h3/ Siemens-5SX4/ Havells STADx /L&T-AU/Indo Asian-Opti pro/ HPL (Techno) or equivalent make as approved by the competent authority.

Civil work;Supply and making one end termination with heavy duty double compression brass gland of size 3.5C x 70 Sqmm size as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. Makes:Dowels/Comet/SMI or equivalent make as approved by the competent authority.

Civil work;Supply,Transportation and laying of Outer dia 90mm and Inner dia 76mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II having corrugation on the outer wall and plain surface inner wall complete with necessary HDPE fittings for protection of 1.1 KV grade U.G cable as required. Makes:DURA LINE (Dura Guard) or equivalent make as approved by the competent authority.

Civil work;Supply, Transportation, Laying, testing and commisisoning of 3.5C x 70 Sqmm XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)./1554-I in existing hume pipe/HDPE pipe/trench/cable tray with necessary fixing arrangments as required (as directed by departmental official) complete including labour charges. Makes: Torent / Universal / Unicab / Havells / KEI / Gloster/Finecab / Polycab /RR Kabel or equivalent make as approved by the competent authority.

Civil work;Supply and laying of 25mm x 6mm GI Flat (1.18Kgs/1Mtr) Earth wire/Strip in horizontal /Vertical run in Ground/surface/Recess including, revitting,soldering,saddles,making connection etc as required of approved/equivalent make as approved by the competent authority.

Civil work;Supply and laying of 25mm x 3mm Copper Flat (0.663Kgs/1Mtr) Earth wire/Strip in horizontal /Vertical run in Ground/surface/Recess including, revitting,soldering,saddles,making connection etc as required of approved/equivalent make as approved by the competent authority.

Civil work;Supply and laying of 8 SWG GI wire(0.104Kgs/1Mtr) Earth wire/Strip in horizontal /Vertical run in Ground/surface/Recess including, revitting,soldering,saddles,making connection etc as required of approved/equivalent make as approved by the competent authority.

Civil work;Providing earthing as per IS 3043 with copper earth plate of size 600 x 600 x 3.15 mm by embodying 3 to 4 mtr below the ground level with 40mm dia 'B' Class G.I Pipe by exacavating a pit to a depth of 3 to 4 Mtr in all soils for Sophisticated Electronic equipment as per National Electric Code and earth connection from electrode Copper strip of 25mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to Copper strip including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powderincluding all accessories like nuts bolts reducer,nipple, wire meshed funnel andCCfinished chamber covered with hinged type with CI cover ,CI frame of size 600 X 600 mm ,testing earth resistance as required etc., complete of approved/equivalent make as approved by the competent authority.

Civil work;Providing earthling as per IS 3043 with perforated 3 mtr long 40 mm dia B class GI pipe including all accessories like nuts bolts reducer,nipple, wire meshed funnel and CC finished chamber covered with hinged type with CI cover ,CI frame of size 600 X 600 mm and embodying the pipe complete with alternate layers of salt and coke /charcoal/bentonite powder testing earth resistance as required etc., complete including all labour charges for finished item of work and as directed by Engineer-In-Charge of approved/equivalent make as approved by the competent authority.

Civil work;Supply and fixing Cermaic Urinal PARTITION plate 675 x 325 x 85 mm or equivalent size as per IS 2556 (Part 6) : latest amendments including cost and conveyance of all materials, to work site and all operational, incidental labour and overheads & contractors profit complete for finished item of work and as directed by the Engineer-in-Charge

Civil work;Supplying, Laying & Jointing of 250mm diameter R.C.C.Socket and Spigot pipess of NP2 class conforming to IS 458 & amendments, including all lead & lift, Lowering the RCC S/S pipes carefully into the trenches laying them true to alignment and gradient and jointing with rubber rings including cost and conveyance of all materials to site, labour charges, overheads & contractors profit etc., complete for finished item of work and as directed & approved by Engineer-in-charge.

Civil work;Supplying, Laying & Jointing of 200mm diameter R.C.C.Socket and Spigot pipess of NP2 class conforming to IS 458 & amendments, including all lead & lift, Lowering the RCC S/S pipes carefully into the trenches laying them true to alignment and gradient and jointing with rubber rings including cost and conveyance of all materials to site, labour charges, overheads & contractors profit etc., complete for finished item of work and as directed & approved by Engineer-in-charge.

Civil work;Constructing 904.0mm (3'0") dia brick mansory inspection chamber as per IS-4111:Part-1 & amendments with cement mortar (1:6) prop using 2nd class clay brick of 225mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½" thick both inside and outside fitted with 20" dia SFRC manhole covers and frames including excavating pits up to depth of 1524 mm (5'-0") in all sorts of soils (Excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG metal and P.C.C 1:2:4 benching and channel 100 mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks,water etc., to site cost of seigniorage charges on all materials and all incidental and operational labour charges, curing etc., complete for finished item of work as per standard specification and as directed & approved by Engineer-in-charge.

Civil work;Constructing 904.0mm (3'0") dia brick mansory inspection chamber as per IS-4111:Part-1 & amendments with cement mortar (1:6) prop using 2nd class clay brick of 225mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½" thick both inside and outside fitted with 20" dia SFRC manhole covers and frames including excavating pits up to depth of 904 mm (3'-0") in all sorts of soils (Excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG metal and P.C.C 1:2:4 benching and channel 100 mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks,water etc., to site cost of seigniorage charges on all materials and all incidental and operational labour charges, curing etc., complete for finished item of work as per standard specification and as directed & approved by Engineer-in-charge.

Civil work;Manufacture, supply, & delivery including laying & jointing of 250 mm Inner Dia - SN 8 (DWC) structured wall polyethylene/polypropylene piping system with non smooth external annular corrugated and smooth internal surface (Double Wall) for non pressure sewage & Drainage application pipes of standard length 6 m, grade conforming to IS 16098-2 & amendments including transportation to anywhere in A.P, SN-8 class including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work and as directed & approved by Engineer-in-charge.

Civil work;Manufacture, supply, & delivery including laying & jointing of 200 mm Inner Dia - SN 8 (DWC) structured wall polyethylene/polypropylene piping system with non smooth external annular corrugated and smooth internal surface (Double Wall) for non pressure sewage & Drainage application pipes of standard length 6 m, grade conforming to IS 16098-2 & amendments including transportation to anywhere in A.P, SN-8 class including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work and as directed & approved by Engineer-in-charge.

Civil work;Manufacture, supply, & delivery including laying & jointing of 150mm Inner Dia - SN 8 (DWC) structured wall polyethylene/polypropylene piping system with non smooth external annular corrugated and smooth internal surface (Double Wall) for non pressure sewage & Drainage application pipes of standard length 6 m, grade conforming to IS 16098-2 & amendments including transportation to anywhere in A.P, SN-8 class including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work and as directed & approved by Engineer-in-charge.

Civil work;Supplying and fixing of SWG Gully traps 150mm x 100mm of ISI make confirming to IS 651 & 4127 with C.I grating including cost and conveyance of all materials to site, labour charges, overheads & contractors profit etc., complete for finished item of work and as directed & approved by Engineer-in-charge.

Civil work;Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM1:6 prop.Masonry. Inspection chamber upto 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2mm (1'6"x1'6") C.I frame and cover of 20Kg. including cost and conveyance of all materials to site, labour charges, complete for finished item of work and as directed & approved by Engineer-in-charge.

Civil work;Manufacture, Supply and delivery of 65mm DI Wafer Lug type Butterfly Valves conforming to IS 13095 & amendments excluding transportation, CED and taxes etc., complete. Operation done with worm actuator ISI marked Rate at Ex-Factory Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto / Valtree including cost and conveyance of all materials to site, labour charges for fixing, complete for finished item of work at all floor levels and as directed & approved by Engineer-in-charge.

Civil work;S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 50 mm NB Size including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels and as directed & approved by Engineer-in-charge.

Civil work;S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 40 mm NB Size including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels and as directed & approved by Engineer-in-charge.

Civil work;S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 32 mm NB Size including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels and as directed & approved by Engineer-in-charge.

Civil work;S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels and as directed & approved by Engineer-in-charge.

Civil work;Supplying and fixing 65 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 & amendments in ground or on wall with GI fittings such as elbows tees couplings, unions, nipples, plugs including excavation for trenches and refilling the trenches ,chiselling masonry walls and making good the walls & floors to the original surface and fixing MS clamps on TW blocks on walls including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work except for GI bends union and GI connectors with checkout and socket Tata or Zenith make or equivalent complete for finished item of work at all floor levels and as directed & approved by Engineer-in-charge.

Civil work;Supplying and fixing of 4" (101.6mm) multi floor trap with jali - UPVC/SWR pipe fittings as per site requirements with standard practice for all floors including cost and conveyance of all materials to site, labour charges , overheads & contractors profit etc., complete for finished item of work at all floor levels and as directed & approved by Engineer-in-charge.

Civil work;Supply, installation and testing of PVC SWR pipes 160 mm dia Type B confirming to IS 13592 & amendments for waste connection from wash basin, kitchen sinks/pantry sinks/janitor sinks/Urinals to floor trap / anti syphonage pipe with solvent cement joints, including all the fittings, laid under floor / concealed in wall etc., the work shall include wall chasing and making good the same in cement mortar necessary supports etc., complete. including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels and as directed & approved by Engineer-in-charge.

Civil work;Supply, installation and testing of PVC SWR pipes 110mm dia Type B confirming to IS 13592 & amendments for waste connection from wash basin, kitchen sinks/pantry sinks/janitor sinks/Urinals to floor trap / anti syphonage pipe with solvent cement joints, including all the fittings, laid under floor / concealed in wall etc., the work shall include wall chasing and making good the same in cement mortar necessary supports etc., complete. including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels and as directed & approved by Engineer-in-charge.

Civil work;Supply, installation and testing of PVC SWR pipes 75mm dia Type B confirming to IS 13592 & amendments for waste connection from wash basin, kitchen sinks/pantry sinks/janitor sinks/Urinals to floor trap / anti syphonage pipe with solvent cement joints, including all the fittings, laid under floor / concealed in wall etc., the work shall include wall chasing and making good the same in cement mortar necessary supports etc., complete. including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels and as directed & approved by Engineer-in-charge.

Civil work;Supply, installation and testing of PVC SWR pipes 50 mm dia Type B confirming to IS 13592 & amendments for waste connection from wash basin, kitchen sinks/pantry sinks/janitor sinks/Urinals to floor trap / anti syphonage pipe with solvent cement joints, including all the fittings, laid under floor / concealed in wall etc., the work shall include wall chasing and making good the same in cement mortar necessary supports etc., complete. including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels and as directed & approved by Engineer-in-charge.

Civil work;Supply, installation and testing of PVC SWR pipes 40 mm dia Type B confirming to IS 13592 & amendments for waste connection from wash basin, kitchen sinks/pantry sinks/janitor sinks/Urinals to floor trap / anti syphonage pipe with solvent cement joints, including all the fittings, laid under floor / concealed in wall etc., the work shall include wall chasing and making good the same in cement mortar necessary supports etc., complete. including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels and as directed & approved by Engineer-in-charge.

Civil work;Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings 54.00mm OD SDR 13.5 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels and as directed & approved by Engineer-in-charge.

Civil work;Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings 41.30mm OD SDR 13.5 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials t site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels and as directed & approved by Engineer-in-charge.

Civil work;Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings 34.90mm OD SDR 13.5 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels and as directed & approved by Engineer-in-charge.

Civil work;Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings 28.60mm OD SDR 13.5 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels and as directed & approved by Engineer-in-charge.

Civil work;Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings 22.20mm OD SDR 13.5 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels and as directed & approved by Engineer-in-charge.

Civil work;Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings 15.90mm OD SDR 13.5 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels and as directed & approved by Engineer-in-charge.

Civil work;Supply & fixing Angular stop cocks with wall flange Jaquar make Queen series with 7 years warranty: Chrome plated including labour charges complete overheads & contractors profit complete for finished item of work in all floors and as directed & approved by Engineer-in-charge.

Civil work;Supply & fixing of Auto closing Concealed Urinal Flush Valve With Wall Flange for urinal complete set with installation box with control cock, Chrome plated with 7 years warranty including labour charges complete overheads & contractors profit complete for finished item of work in all floors Make: jaquar or equivalent including cost and conveyance of all materials to site, labour charges for fixing complete for finished item of work at all floor levels and as directed & approved by Engineer-in-charge.

Civil work;S&F TV shape mirror with size 609.60 mm x 457.20mm including labour charges complete overheads & contractors profit complete for finished item of work in all floors and as directed & approved by Engineer-in-charge.

Civil work;Supply & Fixing of Bibcock Jaquar Continental series, Chrome Finish with 7years warranty including labour charges complete overheads & contractors profit complete for finished item of work in all floors and as directed & approved by Engineer-in-charge.

Civil work;Supply & Fixing of Bibcock cum Health Faucet with 1m longtube and wall hook of Jaquar Continental series, Chrome Finish with7 years warranty including labour charges complete overheads & contractors profit complete for finished item of work in all floors and as directed & approved by Engineer-in-charge.

Civil work;Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming to IS:2556-Part6, Sec-6 fixed with screws complete Indian make : 590 x 375 x 390 mm including cost and conveyance of all materials to site, labour charges for fixing, complete for finished item of work as directed & approved by Engineer-in-charge.

Civil work;Supplying & Fixing Indian makeFlat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 630 x 450 mm - Double C.P. Pillar cock including cost and conveyance of all materials to site, labour charges for fixing, complete for finished item of work as directed & approved by Engineer-in-charge.

Civil work;Providing and fixing extended Wall hung WC Size: 560mm x 365mm or equivalent size of approved shape including Concealed Cistern, Face Plate,wall hung WC connector,with wall hung WC fixing rack Bolts & including angle Valve Make: Jaquar or equivalent including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work as directed and approved by Engineer-in-charge.

Civil work;Painting to New walls with two coats of Acrylic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 911) in All Floors for interior walls.

Civil work;Providing and applying HI-BOND Wall Putty Super Fine or Acrylic based ready to use surface (white / off white) -Wall strong WC/ Zoritek WC or Equivalent of average 1.5 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 375 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges, over heads and contractors profit etc., complete for finished item of work and as directed by the Engineer-in-Charge internal walls.

Civil work;Plastering with 12mm thick in single coat in CM (1:4) finished smooth including cost and conveyance of all materials to site, seigniorage charges on all materials, finishing, curing, scaffolding and all operational, incidental, labour charges etc., including cutting grooves where ever necessary etc., complete for finished item of work.

Civil work;Masorny work in CM (1:6) prop with Flyash cement/ lime solid blocks with compressive strength of 75 kg/sq.cm -IS:12894 & amendments CLASS-7.5- 290x225x140 mm (or) equvalent size including cost and conveyance of all materials, labour charges , scafolding and curing etc., complete for walls for superstructure

Civil work;Supply and fixing CEMENT BONDED PARTICLE BOARDS (IS 14276) double skin partition using with 10 MM CEMENT BONDED PARTICLE BOARDS made out of G.I. track section of size 50mmx 35mm x 0.55 mm for fixing to the roof and floor and stud section of size 48mm x 35mm x 0.55mm placed in track section vertically at 610mm intervals and at 1200mm intervals horizontally fixed to the wall by means of self expansion screws and caps to the wall and roof. CEMENT BONDED PARTICLE BOARDS is to be fixed both sides of frame work by using self taping screws fixed at every 300mm intervals to the frame work leaving 3 mm gap between two panels. The cost inclusive with one coat of primer and two coats of smooth finish and cost and conveyance of all materials to site, labor charges etc., complete as per the direction of Engineer in charge.

Civil work;Painting to New walls with two coats of Acrylic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 911) in All Floors for interior walls.

Civil work;Supplying and fixing of false ceiling using Plaster of paris Boards 12 mm thick with standard GI ceiling angles, sections perimeter channels including cost and conveyance of all materials and labour charges etc complete

Civil work;Dadooing to walls with Supply of glazed full body porcelain wall tiles of size 300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:3) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand, water, tiles, coloured cement etc., to site, excluding cost of seigniorage charges on all materials, but including all labour charges for mixing of cement mortar, laying glazed tiles to level, curing, overheads and contractor's profit etc., complete for finished item of work.

Civil work;75mm thick Cement concrete flooring M20 nominal mix concrete with 20 mm nominal size stone aggregate finished with a floating coat of neat cement, including cement slurry, etc. . including all labour charges, curing, complete for finished item of work.

Civil work;Flooring with Supply of Non-skid red or white full body Ceramic floor tiles of Size 300 mm x 300 mm and thickness between 7-8 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs of any colour and finish in all shades and designs ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including, complete for finished item of work, .

Civil work;Flooring with soluble salt porcelain vitrified tiles screen printed and polished of size 600 x 600 mm and thickness between 8 -10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work,

Civil work;Plain Cement Concrete (1:3:6) M 10 nominal mix using 20mm size machine crushed hard granite metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc. to site, sales & other taxes on all materials, all charges for mixing, laying concrete in position, vibrating, curing, centering charges, overheads & contractors profit etc.,excluding cost of steel & its fabrication Charges for finished item of work and as directed by the Engineer-in-Charge.

Civil work;Supply and fixing of toilet door shutter with frame made of M.S. door frame of 5mmX48mmX48mm (L angel) as all- round frame the frame is coated with one coat of red oxide and two coats of enamel of approved color. For shutter and the shutter is made with 16mm laminatedshutter with all-round ?U? Lipping of PPS section of 12mmX18mmX12mmX0.60mm, along hardware of 200m long and 12mm dia aluminum aldrop( ISI make)2 Nos, 2Nos of 125m m handle, 3 Nos of RT patte hinges IS 304gr SS 2mmX12mmX180mm long with a pole receiver of 10mmDia X 40mm by welded on 3mmX40mm SS 304, plate it works as receiver for RT Patee hinges it is welded to M.S. angle . M.S. angle will be fixed to wall of self expandable screws and caps.

Civil work;Providing and fixing of door frame made from cold roll formed sections made of galvanized (Base steel as per IS277 with zinc of 120 Gms/sqm) colour coated steel sections with total coated thickness of 1mm, primer coated with epoxy primer coat of 5-7 microns thick, finish paint with polyester paint of 12-16 microns. The Section for door frame is to be filled with polyurethane (P.U) form of 40kg/m3. Overall size of frame section should be of 50mm x 50mm. With necessary corner brackets, stiffeners, hinges, and screws. Cement Bonded particle board shutter ?Single Leaf? with all round styles ?U? section of size 12m x 18m x 12mm made from 0.6 mm thick galvanized, colour coated cold rolled steel profiles with 16mm thick Cement Bonded particle Board with necessary screws fixed at every 1?-0? (304.8mm) intervals. The cost inclusive of MS nickel coated Aldrop of size 250mm long 2nos. 200mm long tower bolt 1no., 125mm handles 2nos., cost and conveyance of all materials at site and applying one coat primer , one coat of luppum and two coats of synthetic enamel paint as per approved design for finished item of work

Civil work;Supply and fixing of pre-painted steel openable windows Double shutter 4'-0" x 4 '-0" (1219.2 x 1219.2 mm) base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS 277, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, section for outer frame of 46 x 52 mm section and for shutter of 46 x 46 mm section for mullion 46 x 70 mm, and section for beading should be 18 x 25 mm with 5 mm thick plain float glass fitted with Ethyl propylene Diamine monomer Gasket (EPDM) and handle made of high grade aluminium powder coated with frames fixed to the concrete/masonry wall by means of self expanding screws including 10 mm square guard bars with 6" pitch complete for finished item of work.

Civil work;Painting to New walls with two coats of Acrylic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 911) in All Floors for interior walls.

Civil work;Providing and applying HI-BOND Wall Putty Super Fine or Acrylic based ready to use surface (white / off white) -Wall strong WC/ Zoritek WC or Equivalent of average 1.5 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 375 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges, over heads and contractors profit etc., complete for finished item of work and as directed by the Engineer-in-Charge internal walls.

Civil work;Plastering with 12mm thick in single coat in CM (1:4) finished smooth including cost and conveyance of all materials to site, seigniorage charges on all materials, finishing, curing, scaffolding and all operational, incidental, labour charges etc., including cutting grooves where ever necessary etc., complete for finished item of work.

Civil work;Masorny work in CM (1:6) prop with Flyash cement/ lime solid blocks with compressive strength of 75 kg/sq.cm -IS:12894 & amendments CLASS-7.5- 290x225x140 mm (or) equvalent size including cost and conveyance of all materials, labour charges , scafolding and curing etc., complete for walls for superstructure

Civil work;Side walls will be provided with using Pre-painted Galvanized Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Zinc coating Z120 GSM. Tensile Strength: 300 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns with Regular Range Colours, fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti capillary grove. sheet including cutting, fabricating, erection at all levels with authorised all fixtures and fixing accessories such as self drilling, self tapping fasteners, butyl or acrylic sealant, profiled foam / neoprene fillers etc. including cost of all materials, scaffolding,tools, tackles, equipment, preparation of shop drawings etc. all complete as per specifications and as directed.

Civil work;Flashings: Supply and fixing of Roof Accessories medium size: Ridge, Barge Cap, Corner Trim, L- Flashing, Down Pipes, Gutter etc., with Pre-painted Galvanized sheets with 0.50mm thickness, Coating: Zinc coating Z120 GSM, including cutting, fabricating, erection at all levels with authorised, providing openings, touch up painting, all fixtures and fixing accessories such as self drilling, self tapping fasteners, butyl or acrylic sealant, profiled foam / neoprene fillers etc. including cost of all materials, scaffolding,tools, tackles, equipment, preparation of shop drawings etc. all complete as per specifications and as directed.

Civil work;Roofing will be provided with using Pre-painted Galvanized Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Zinc coating Z120 GSM. Tensile Strength: 300 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns with Regular Range Colours, fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti capillary grove. sheet including cutting, fabricating, erection at all levels with authorised all fixtures and fixing accessories such as self drilling, self tapping fasteners, butyl or acrylic sealant, profiled foam / neoprene fillers etc. including cost of all materials, scaffolding,tools, tackles, equipment, preparation of shop drawings etc. all complete as per specifications and as directed. Note: Sloped plan area only will be measured.

Civil work;Supply, farbrication and Erection Charges for fixing in position structural steel Members / Sections at all levels and to any shape & profile consisting of MS joists, channels, angles, purlins, runners, insert plates, flats, circular and rectangular tubuler sections and sag rods with necessary sleeves, bolts and nuts, gratings, pipes including cutting, straightening, welding as per standards for connections including consumables, anchoring the structural members in to the RCC/Masonry wall with suitable anchor fastener ; complete at any level and height. Rate shall include preparation of surfaces and applying a coat of primer and two coats of enamel paint.

Civil work;Providing High Yield Strength Deformed (HYSD/) Thermo Mechanically Treated (TMT) Mild Steel (MS) steel bars Fe-500/500D/550D grade as per IS 1786 of different diameters for RCC works, including labour charges for staightening ,cutting,bending to required size and shape s, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG ,forming grills for reinforcement work as per approved designs and drawings,including cost and conveyance of steel bars, including all wastages such as overlaps couplings, chairs, spacer bars including cost and conveyance of binding wire ,cover blocks and all incidental, operational, labour charges such as cutting ,bending,placing in postion, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.(Apssno.126).

Civil work;Plinth Beams: Supply and placing of the RCC M-30 Grade Design Mix Concrete corresponding to IS 456 using Batching Plant with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. (BLD-CSTN-2-14).

Civil work;Footings/ Pile Caps: Supply and placing of the RCC M-30 Grade Design Mix Concrete corresponding to IS 456 using Batching Plant with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. (BLD-CSTN-2-14).

Civil work;Pre construction Anti termite is a process in which chemical toxic to subterrean termites is apply/ inject into soil during early stage of building Construction 2. Treatement of soil Beneath the building and around the foundations conduct and chemical use as per BIS - IS 6313 (Part -2) 2013 code specification & CIB RC registered termiticide which creates a continuous chemical barrier beneath the building which kills or repels terminates & impervious to tremite entry Imidacloprid 30.5% SC (IS 63131) dissolve 2.1 Ml/1 liter of water and apply emulsion/solution @ 7.5 Litres/Square meter (Sqm) of internal, external vertical surface of the colums , plinth beams (Back filling) walls and floor junction, external perimeters, along reatining wall @ 5.0 Liters/Sqm of the horizontal surface of basement top surface of the basement filling below flooring bed (Plinth) & @ 2.0 Litres/ Line meter at expansion joints. The substructure of a depth of 500mm around coulmns & 300mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc. cost & Conveyance of all materials to the site, cost of labour for sparying, rodding etc. complete for furnished item of work as per the approval of the Engineer-in-charge

Civil work;Piling Concrete - Supply and placing of the RCC M-30 Design Mix Concrete corresponding to IS 456 using BATCHING PLANT at site with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as batching, mixing, pouring concrete by tremmy, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including tremmy pumping, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.

Civil work;Under - reaming for BORED CAST-IN-SITU R.C.C PILES 450mm dia for building foundation in loamy, clayey soils like black cotton soils and ordinary soils without under reams as per is 2911-1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery ,augerbore drill and shell equipment, etc, complete for all depths and finished item of work for piles

Civil work;Augoring and boring of holes in site for BORED CAST-IN-SITU R.C.C PILES 450mm dia for building foundation in loamy, clayey soils like black cotton soils and ordinary soils without under reams as per is 2911-1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery ,augerbore drill and shell equipment, etc, complete for all depths and finished item of work for piles

Civil work;Plain Cement Concrete (1:3:6) M 10 nominal mix using 20mm size machine crushed hard granite metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc. to site, sales & other taxes on all materials, all charges for mixing, laying concrete in position, vibrating, curing, centering charges, overheads & contractors profit etc.,excluding cost of steel & its fabrication Charges for finished item of work and as directed by the Engineer-in-Charge.

Civil work;Supply and Filling of gravel including cost and conveyance off all materials and all labour charges ramming,watering etc, as per drawing and technical specification MORD & MORTH

Civil work;Supply and Filling of local earth for foundation trenches including cost and conveyance off all materials and all labour charges ramming,watering etc, as per drawing and technical specification as per MORTH

Civil work;Supply and Filling of Sand for foundation trenches including cost and conveyance off all materials and all labour charges ramming,watering etc, as per drawing and technical specification as per MORTH

Civil work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH including cost of all labour charges and overheads & contractors profit complete for finished item of work and as directed by the Engineer-in-Charge.

Civil work;Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared. (Heavy Jungle)