Andhra Pradesh Capital Region Development Authority Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Andhra Pradesh Capital Region Development Authority - APCRDA Tender
Education And Training Services
Opening Date9 Nov 2020
Closing Date24 Nov 2020
Tender Amount₹ 76,53,744
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
357768Bid Award Id
ViewTender No
07/2020/MAU61-USI0HB(BG)/41/2020-CEAG/2nd callTender Authority
Andhra Pradesh Capital Region Development Authority ViewPurchaser Address
-Website
http://https://crda.ap.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Primary school;Supply & fixing of Modular co-Axial socket type TV Antenna outlet.
1
-
102.3
Primary school;Fabrication, transportation, supply, installation, testing & Commissioning of suitable size panel board for single phase 1.5 HP motor consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch including supply and fixing of DOL starter.
1
-
5416.5
Primary school;Supply and Transportation, installation, testing & Commissioning of 1.5HP Single phase Mono block CI body motor pumpset confirms to IS 9079:2002
1
-
12855.5
Primary school;Supply, Installation, Testing and Commissioning of ongrid Solar Photovoltaic PowerPlant conforming to MNRE specifications as amended, consisting of Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/GI structure of suitable strength with following components complete as required:- a) Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 VAC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency. c) Data Monitoring System complete with accessories. d) Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. e) Lightning and surge voltage protection. f) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1 kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other accessories etc. as required.
10
-
528930
Primary school;Supply and fixing of ISI mark (IS:15683) Mono ammonium phosphate powder 90 (MAP) 4 Kg Fire extinguisher, stored pressure type, pressure gauge, gross wt. 6.9 kg, empty wt.2.9 kg, Discharge time minimum 13 sec, controllable discharge mechanism, range min. 4 mts applicable on classes A,B, C & electrically started fire, A rating -3 A, B rating -34 B, can construction: Deep drawn and Co2 mig welding, Valve construction: Forging & Machining, internal coating of can: Epoxy powder coating, External coating of Can:Epoxy polyster powder coating, sheet metal thickness:1.60mm, Helium leak detection tested with 5 years warranty Including transportation, all taxes and all labour charges etc complete.
5
-
21587
Primary school;Supply,Transportation, laying of 3Cx4Sq.mm XLPE/PVC insulated & PVC sheathed armoured cables of 1.1 KV grade with copper conductor as per IS 7098 Part-I -1988 etc
120
-
23904
Primary school;Supply and Fixing of 25mm dia 16 SWG (ISI Mark) MS Surface conduit pipe duly threading at Joints with all required accessories fixing on Separators with chromium plated base saddles and No.18 SWG MS box for light, fan and separate plug points including cost of Cement, all materials, accessories and all labour charges etc., complete as per detailed technical specifications and approved make.
8
-
1727.2
Primary school;Supply and Fixing of 20mm dia 2.1mm thick P.V.C. pipe (ISI MARK) concealed in wall with all required accessories accessories such as junction boxes confirms to IS:3419, conduit , bends, elbows and ceiling rose, with all necessary fixing accessories like mounting screws .clamps etc. including all labour charges etc., complete
1165
-
90171
Primary school;Supply and Fixing of 25mm dia 2.2mm thick PVC pipe (ISI MARK) concealed in wall with all required accessories such as junction boxes confirms to IS:3419, conduit , bends, elbows and ceiling rose, with all necessary fixing accessories like mounting screws .clamps etc. including all labour charges etc., complete
466
-
40588.6
Primary school;Supply and Fixing of 32mm dia 2.1mm thick PVC pipe (ISI MARK) concealed in wall with all required accessories such as junction boxes confirms to IS:3419, conduit , bends, elbows and ceiling rose, with all necessary fixing accessories like mounting screws .clamps etc. including all labour charges etc., complete
230
-
22885
Primary school;Supply, laying & testing of 56/0.3mm (4.0 Sqmm) FRLS-H / HFFR PVC insulated 1100V grade as per IS : 694 / 1990 specification for Copper cable.
350
-
21525
Primary school;Supply, laying & testing of 36/0.3mm (2.5 Sqmm) FRLS-H / HFFR PVC insulated 1100V grade as per IS : 694 / 1990 specification for Copper cable.
1318
-
53379
Primary school;Supply, laying & testing of 22/0.3mm (1.5 Sqmm) FRLS-H / HFFR PVC insulated 1100V grade as per IS : 694 / 1990 specification for Copper cable.
3416
-
102138.4
Primary school;Supply, fixing & Cable termination of 16A 1 way Combi Socket Modular Socket with shutter
6
-
852
Primary school;Supply, fixing & Cable termination of 16A / 20A 1 Way 1 Module Modular Switch.
6
-
511.2
Primary school;Supply, fixing & Cable termination of 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter.
28
-
2704.8
Primary school;Supply, fixing & Cable termination of 6A / 10A 1 Way 1 Module Modular Switch.
113
-
7062.5
Primary school;Supply & Fixing of Hot Dip galvanized 20/18 SWG 3 Module box (Concealed) with earthing terminal & cover frame
8
-
1272.8
Primary school;Supply & Fixing of Hot Dip galvanized 20/18 SWG 4 Module box (Concealed) with earthing terminal & cover frame
1
-
187.5
Primary school;Supply & Fixing of Hot Dip galvanized 20/18 SWG 6 Module box (Concealed) with earthing terminal & cover frame
1
-
261.3
Primary school;Supply & Fixing of Hot Dip galvanized 20/18 SWG 8 or 9 Module box (Concealed) with earthing terminal & cover frame
6
-
2011.2
Primary school;Supply & Fixing of Hot Dip galvanized 20/18 SWG 12 Module box (Concealed) with earthing terminal & cover frame
13
-
5242.9
Primary school;Supply of 12" (300mm) Light duty exhaust fan with metalic blades and wire guard etc complete.
4
-
7379.6
Primary school;Supply & fixing of Consealed MS box with hook for fan
34
-
5205.4
Primary school;Supply & fixing of 2 Module Modular type Electronic step type Fan Regulator.
34
-
15442.8
Primary school;Supply of 48" (1200mm) Sweep decorative Ceiling Fan, with double ball bearings with all accessories without Regulator.
34
-
95560.4
Primary school;Supply, Transportation & fixing of 40W LED Post top lantern made with cast Alluminium with decorative opel polycarbonate diffuser with IP 65 protection, min. 120 lumens /watt etc., complete with all accessories
2
-
20104.2
Primary school;Supply & fixing of 10W LED Bulk head fitting with Pressure die cast alluminum with opal diffuser with IP 65 Protection min. 120 lumens /watt etc., complete.,
20
-
27618
Primary school;Supply, fixing of 7 W Lamp with input voltage 90 to 300V, Colour temparature 3000k - 6500k, min. 120 lumens /watt Beam angle 170 - 220 degrees, B22 base with holder .
25
-
7255
Primary school;Supply and fixing of 40W, 1200mm length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<15%, with inbuilt driver and frosted cover CCT: 5000K - 6500K, min. 150 lumens /watt, minimum CRI>70, .etc., complete.
50
-
61650
Primary school;Supply and fixing of min 20W, 1200mm length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, min. 150 lumens /watt, minimum CRI>70, .etc., complete.
20
-
18238
Primary school;Supply and laying of following sizes 8 SWG GI wire (0.104Kgs/1Mtr) Earth wire/ Strip in horizontal / Vertical run in Ground/ surface/ Recess including, revitting, soldering, saddles, making connection etc as required
30
-
240
Primary school;Supply installation and testing of independent earthing for Important equipment with 100mm dia Heavy gauge C.I ( Cast iron ) pipe with Flange 2.5m long enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)
1
-
8521.1
Primary school;Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size.
2
-
522.6
Primary school;Supply, laying and dressing of 4Core 10Sq.mm 1100 volt grade XLPE insulated PVC sheathed Aluminium conductor armoured XLPE/PVC cables as per specification in cable trays, shafts, clamped includes anchor fastners wall with suitable clamps, saddles fixing bolts including connecting testing and commissioning.
15
-
2604
Primary school;Supply, fixing, dressing and cable termination of (8 +24) 8 Way TPN DB Horizontal with IP 43 Protection suitable for 18 Nos of 10 kA - 6-32A range SP MCBs outgoing, 3No's of 40A 2 Pole RCCB 30mA as per phase isolation and 1 no of 63A FP MCB ,as per IS:13032, IS 8623; IEC 61439-3 including internal connection, labour charges for surface / flush mounting, chipping & plastering etc. as complete .
1
-
21548.1
Primary school;Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of ?L? shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-in-charge.
23.5
-
15968.25
Primary school;Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineerin- Charge - 25mm thick in Grade M 25 with cement content not less than 330 kg per cum
23.5
-
10892.25
Primary school;Providing, mixing and applying SBR polymer (of approved make @ minimum 2% by wt. of cement used) modified plain/reinforced cement concrete for structural members having minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria] with specified average thickness - 50mm thick in Grade M 25 with cement content not less than 330 kg per cum
23.5
-
7778.5
Primary school;Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect - SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer
23.5
-
21685.8
Primary school;Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. - Bars upto 12 mm diameter
25
-
104.97
Primary school;Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge - 25 mm average thickness
23.5
-
1905.85
Primary school;SPECIALISED HIGH STRENGTH CELLULOSE FIBRE REINFORCED ACRYLIC ELASTOMERIC LIQUID MEMBRANE COATING FOR TERRACE : a). Providing and application of one coat of High Solid, Cold applied Acrylic Elastomeric Liquid Membrane Coating with ? RAINSEAL (Armstrong )/ POWER n COAT EWC (EBT) / DECKGUARD E 2000 (Fosroc) /ZORICOAT EWC (PMCC) / SIKAGARD 550 W / WATERSHIELD EWC 600 diluting with water at 1 : 0.50 ratio as a primer coat at a consumption of 200ml per Sqm. b). Providing and laying of Non woven polyster reinforced fibre mesh of 40 GSM, with 1 Mtr width and 50mm overlap on the primed surface. c) Providing and application of one coat of High strength cellulose fibre reinforced Acrylic Elastomeric Liquid Membrane coating with -RAINSEAL CFR (Armstrong / ZORICOAT CF (PMCC) / POWER n COAT CR (EBT) WATERSHIELD FLEX CR / FIBRE REINFORCED ACRYLIC ELASTOMERIC COATINGS (Fosroc ) diluting with water at 20% as a base coat application at a consumption of 400ml per Sqm.
47
-
27231.8
Primary school;Cleaning of the surface : For Waterproofing treatment - If the surface is sound & hard Condition, the surface must be clean and sound duly removing of exisiting tretaments clean from dirt, dust and other contaminations by power
47
-
3205.4
Primary school;Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank - 500 litres
1000
-
5700
Primary school;Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 300mm RCC pipe.
30
-
20262
Primary school;Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : - 300mm dia RCC pipe.
30
-
19815
Primary school;Extra for depth for manholes : Size 120x90 cm : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
8053.6
Primary school;Extra for depth for manholes : Size 90x80 cm: With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
6737.6
Primary school;Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarsesand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 120x90 cm and 90 cm deep including precast RCC manhole rectangular cover and frame of 600 x 450 mm internal dimensions: With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
5
-
63495.67
Primary school;Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarsesand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including precast RCC manhole rectangular cover and frame of 600 x 450 mm internal dimensions: With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
5
-
40459.5
Primary school;Constructing Brick masonry chamber over the gully trap or peet valve and fitted with 304.8 x 228.6 m size CI frame and hinged cover.
5
-
10634
Primary school;Supplying & fixing 150 mm x 100 mm SWG gully traps conforming to ISI 651 & 4127 with C.I Grating
5
-
2755
Primary school;Supplying and fixing in position of P Traps - CI (Spun) fittings - 100mm
4
-
3072
Primary school;Supplying and fixing in position of P Traps - CI (Spun) fittings - 75mm
5
-
2800.5
Primary school;Supply, laying, fixing and commissioning of Single Socket Rigid PVC pipe - 4 Kg/sq.cm confirming to IS: 13592 Type A, including couplers/ bends etc including fixing necessary fittings with solvent, laying in trenches to the required line and levels as per standard practice including all labour charges, transportation, loading and unloading and overhead and contractor profit etc., complete for SWR pipes.- 250mm
25
-
26585
Primary school;Supply, laying, fixing and commissioning of Single Socket Rigid PVC pipe - 4 Kg/sq.cm confirming to IS: 13592 Type A, including couplers/ bends etc including fixing necessary fittings with solvent, laying in trenches to the required line and levels as per standard practice including all labour charges, transportation, loading and unloading and overhead and contractor profit etc., complete for SWR pipes.- 200mm
25
-
18122.5
Primary school;Supply, laying, fixing and commissioning of Single Socket Rigid PVC pipe - 4 Kg/sq.cm confirming to IS: 13592 Type A, including couplers/ bends etc including fixing necessary fittings with solvent, laying in trenches to the required line and levels as per standard practice including all labour charges, transportation, loading and unloading and overhead and contractor profit etc., complete for SWR pipes. - 160mm
100
-
50790
Primary school;Supplying and fixing TV shape mirror with plastic frame size 609.6 mm x 457 .2 mm
9
-
4621.5
Primary school;Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour -15 mm nominal bore with 45 cm length
9
-
583.2
Primary school;Supply & Fixing 38.1 mm dia PVC solid waste pipe outlet.
3
-
262.5
Primary school;Supply & fixing 31.75mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality.
9
-
225
Primary school;S & F 38.1 mm C.P waste coupling Half or Full Thread 1st Quality Indian make Parryware or equivalent.
3
-
698.7
Primary school;Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 630 x 450 mm - Single C.P. Pillar cock.
9
-
21381.3
Primary school;Supply, Installation and commissioning approved make floor mounted Close coupled EWC suit CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects: White Colour.
7
-
65692.2
Primary school;S & F concealed stop cock 12.7 mm (1/2") Indian Make --heavy duty.
8
-
4235.2
Primary school;S & F 12.7 mm NP stop cock Indian make heavy duty
9
-
4161.6
Primary school;S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - 50 mm NB Size
2
-
7169.2
Primary school;S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - 40 mm NB Size
2
-
4896.8
Primary school;S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - 32 mm NB Size
2
-
3622
Primary school;S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - 25 mm NB Size
2
-
2388.2
Primary school;S & F CP Long body bib cock fancy type deluxe heavy duty 12.7 mm dia Indian make of approved make & quality.
12
-
7458
Primary school;S & F 12.7 mm heavy duty NP Swan Neck Pillar cock of approved make & quality.
3
-
3387.9
Primary school;Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling or clamping to walls as required & testing of joints complete as per direction of Engineer in Charge. External Work either exposed on walls or buried under ground. 15 mm nominal outer dia Pipes. - 50 mm nominal dia Pipes
39
-
29472.3
Primary school;Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling or clamping to walls as required & testing of joints complete as per direction of Engineer in Charge. External Work either exposed on walls or buried under ground. 15 mm nominal outer dia Pipes. - 40 mm nominal dia Pipes
20
-
11076
Primary school;Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling or clamping to walls as required & testing of joints complete as per direction of Engineer in Charge. External Work either exposed on walls or buried under ground. 15 mm nominal outer dia Pipes. - 32 mm nominal dia Pipes
40
-
16016
Primary school;Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling or clamping to walls as required & testing of joints complete as per direction of Engineer in Charge. External Work either exposed on walls or buried under ground. 15 mm nominal outer dia Pipes. - 25 mm nominal dia Pipes
15
-
4456.5
Primary school;Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. - 20 mm nominal dia Pipes
18
-
7689.6
Primary school;Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. - 15 mm nominal dia Pipes
12
-
4363.2
Primary school;Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.
10
-
1195
Primary school;Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With frosted glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)
6
-
6480.6
Primary school;Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
4
-
4175.2
Primary school;Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, dash fasteners of approved dia, length & numbers, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing be paid for separately) - For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) - Powder coated aluminium (minimum thickness of powder coating 50 micron)
204.4
-
94678.08
Primary school;Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, dash fasteners of approved dia, length & numbers, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing to be paid for separately) : - For fixed portion - Powder coated aluminium (minimum thickness of powder coating 50 micron) - For fixed portion - Powder coated aluminium (minimum thickness of powder coating 50 micron)
30
-
11520
Primary school;Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete - On Steel Work
128.91
-
22030.72
Primary school;Finishing walls with textured exterior paint of required shade with approved finish: New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm.
128.91
-
29803.99
Primary school;Painting to new walls with 2 or more coats of Exterior grade Premium acrylic emulsion paint of approved brand and shade over a base coat of acrylic primer after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for external walls
537.05
-
62243.69
Primary school;Painting to new walls with 2 or more coats of Premium acrylic emulsion of interior grade paint of approved brand and shade over a base coat of acrylic primer after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls.
518.15
-
58550.95
Primary school;20 mm thick plain cement mortar bands in cement mortar 1 : 4 (1cement : 4 sand) upto 300 mm in width -- Raised Band.
300
-
18534
Primary school;Plastering with CM (1:4), 20 mm thick.
157.5
-
35217
Primary school;Plastering with CM (1Cement : 6 Sand)-- 15 mm thick
257.85
-
35970.08
Primary school;Plastering with CM (1 Cement : 6 Sand)-- 12 mm thick.
227.35
-
31078.27
Primary school;Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 sand).
133
-
23365.06
Primary school;Providing, placing and securing in position and terrecotta clay tiles of approved dimension thickness and design over MS Frame supports in slant, hip and gable roofs including providing and placing ridge tiles, cutting of tiles, etc as per directions of Engineer-Incharge. This rate includes cost and conveyance of all materials, labour charges, etc for all activities for finished item of work.
50
-
30657.87
Primary school;Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms.
4
-
303.2
Primary school;Supply, laying, fixing and commissioning of Single Socket Rigid PVC pipe - 4 Kg/sq.cm confirming to IS: 13592 Type A, including couplers/ bends/ tees/ shoes etc including fixing necessary fittings like bends, plugs, couplers, junctions, tees, PVC Clamps etc with solvent jointing as per standard practice including all labour charges, transportation,loading and unloading and overhead and contractor profit etc.,complete for rain water/SWR pipes - 110 mm.
16
-
4265.6
Primary school;Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
4
-
635.2
Primary school;Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 75 x 75 mm deep chase
83
-
15579.1
Primary school;Brick Bat Coba with average thickness of 120 mm and minimum thickness at khurra as 65 mm (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.?All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
217
-
195083
Primary school;Providing and fixing 60 mm thick CC Pavers of specified size with M 30 cement concrete approved design in path ways, parking areas, etc in the given pattern, leaving the gap for planting the grass,set over base coat of cement mortar (1:6) 12 mm thick over CC bed already laid, including near cement slurry of honey like consistency spread @ 3.3.kgs per sqm & packing & finishing the sides including cost & conveyance of all materials, Labour charges, complete for finished item of work.
139
-
122000.3
Primary school;Gronolithic red/black/ yellow/ green / blue/ chocolate oxide Concrete Flooring 20 mm thick with (1:1:2), using 6mm to 12 mm size hard granite machine crushed metal laid over CC bed already laid or RCC roof slab, in alternate panels of size not exceeding 1.50 m x 1.50 m and finishing the top surface to required smoothness and slopes and thread lining including cost of all materials like cement, metal, sand and water etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials.
10
-
4018
Primary school;Gronolithic Concrete Flooring 20 mm thick with (1:1:2), using 6mm to 12 mm size hard granite machine crushed metal laid over CC bed already laid or RCC roof slab, in alternate panels of size not exceeding 1.50 m x 1.50 m and finishing the top surface to required smoothness and slopes and thread lining including cost of all materials like cement, metal, sand and water etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials
6.1
-
2398.52
Primary school;Dado to walls with glazed or white full body ceramic 3 D printed wall tiles of specified size and design of hickness 8 to 10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:5) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials, all labour charge for mixing of cement mortar, laying glazed tiles to level, curing, overheads and contractor's profit etc., complete for finished item of work.
20
-
50644
Primary school;Dado to walls with glazed or white full body ceramic wall tiles of size 450 x 300 mm or 600 x 300mm and minimum thickness 6mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:5) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, pvc corner beading including cost and conveyance of all materials, all labour charge for mixing of cement mortar, laying glazed tiles to level, curing, overheads and contractor's profit etc., complete for finished item of work.
78.3
-
99072.99
Primary school;Ceramic Tile Flooring: Flooring with Non-skid full body Ceramic floor tiles of size 300 x 300 mm and thickness between 8-10 mm 1st quality(BMT-C04) confirming to IS13711, IS13712, IS13630 (Part 1 to 15) of approved colour and pattern, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost & conveyance of all materials, labour charges, etc., complete for finished item of work.
23.29
-
21492.06
Primary school;Grooves 2-3 mm
12
-
750
Primary school;Rounding the edges of Kadapa/ Tandur stone slabs of all thicknesses including polishing the same.
100
-
11929.58
Primary school;Half Rounding the edges of Granite stone slabs of all thicknesses including polishing the same.
10
-
3612.96
Primary school;Providing skirting to internal walls to 15 cm height/risers of steps with 20 mm thick polished Tandur stone length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost & conveyance of all materials, labour charges, etc complete for finished item of work.
9.19
-
7338.25
Primary school;Providing skirting to internal walls upto 15 cm height/risers of steps with 16 mm thick mirror polished granite length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost & conveyance of all materials, labour charges, etc., complete for finished item of work.
19.99
-
31246.19
Primary school;Flooring with 20mm thick polished tandur stones set over base coat of CM (1:8) over already laid CC bed / RCC Roof Slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm. & Jointed with neat cement to full depth including cost of all materials like cement, sand, and water and flooring stones etc., complete, labour charges for dressing of flooring stones etc., complete for finished item of work, but excluding the cost of conveyance of all materials.
71.9
-
89932.52
Primary school;Flooring with 30 mm thick Leather finish Cuddapah stones, set over base coat of cement mortar (1 : 8) 20 mm thick over CC bed already laid or RCC roof slab, steps, landings, ramps, benches & like including pointing with cement mortar 1:3 duly filling joints neatly, including cost & conveyance of all materials, labour charges for all activities including dressing of stone slabs etc., complete for finished item of work.
10
-
10696
Primary school;Flooring with 30 mm thick polished Cuddapah stones, set over base coat of cement mortar (1 : 8) 20 mm thick over CC bed already laid or RCC roof slab, steps, landings, benches & like in linear and curvilenear portions including neat cement slurry of honey like consistency spread at the rate of 3.3 kgs per sqm and jointed with cement up to full depth, including cost & conveyance of all materials, labour charges for all activities including dressing of stone slabs etc., complete for finished item of work.
40
-
31744
Primary school;Providing and laying Granite Flooring with Leather finished Granite 16 to 18 mm thick up to 2.43 M Steel gray or black pearl or equivalent colour as decided by Engineer-in-charge set over base coat of cement mortar (1:8), 20 mm thick over CC bed already laid or RCC roof slab, steps, landings, ramps, benches & like including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost and conveyance of all materials, labour charges, rubbbing, curing, polishing as required etc complete for finished item of work.
214.89
-
491223.91
Primary school;Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm.
12
-
1254
Primary school;Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200mm x 10mm.
6
-
702
Primary school;Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250 mm x 10 mm.
6
-
1936.2
Primary school;30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge.
11.76
-
39630.02
Primary school;Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of crosssection 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
30
-
17454
Primary school;Providing and fixing Hot dipped Galvanised Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-1979 - PVC Coated - 2"x2" (50 mmx50 mm)-8 gauge fabric fencing including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.
138.6
-
117435.78
Primary school;Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by endlocks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108
10.5
-
38150.7
Primary school;Providing and fixing M.S. plain or geometrical grills ( bala grills ) & grilled gates of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. - Fixed to openings/wooden frames with rawl plugs, screws, etc.
217.05
-
23701.86
Primary school;MS Railing for stair cases, balconies, parapets, ramps, etc.: Supplying and fixing of Mild steel railing as per approved drawing with Pre galvanized steel round or rectangular or square tubes cold formed & high frequency welded conforming to ASTM A446 or equivalent standards, as per the approved arcitectural designts and welding, buffing to give seamless finish, fixing including cost and conveyance of all materials, electrodes, welding charges, cost of all consumables, labour charges, overheads & contractors profit etc., complete for finished item of work and as directed by the Engineer-in-Charge .
300
-
36750
Primary school;Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position using structural steel etc. as required - In gratings, frames for fences, frames for tile work, guard bars, ladder, railings, brackets, gates and similar works.
4467
-
450273.6
Primary school;Providing and fixing of Fixed or Openable Windows made of prepainted steel (Base steel as per IS 513 of 0.58 mm thick galvanized as per IS 277 with Zinc of 120 GSM), primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer and section for outer frame of 48 x 50 mm, centre mullion of 48 x 50 mm, section for shutter of 48 x 25 mm and the fixed glass beading section should be 12 x 12 mm and the outer frame and mullions to have rebate for glazed shutter with a 20 mm provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos. of stainless steel heavy duty pivot hinges provided per shutter and windows fitted with 5 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including 10mm Square guard bars with 6? (152.4mm) pitch etc., complete for finished item of work. - Double shutter Window with vertical mullion of specified size.
14.97
-
94837.94
Primary school;Providing and fixing of Fixed or Openable Windows made of prepainted steel (Base steel as per IS 513 of 0.58 mm thick galvanized as per IS 277 with Zinc of 120 GSM), primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer and section for outer frame of 48 x 50 mm, centre mullion of 48 x 50 mm, section for shutter of 48 x 25 mm and the fixed glass beading section should be 12 x 12 mm and the outer frame and mullions to have rebate for glazed shutter with a 20 mm provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos. of stainless steel heavy duty pivot hinges provided per shutter and windows fitted with 5 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including 10mm Square guard bars with 6? (152.4mm) pitch etc., complete for finished item of work. - Fixed window with 5mm thick plain float glass or S.S. Mesh for fly mesh shutter (304 grade) and guard bars as specified above.
11.1
-
48616.89
Primary school;Providing & Fixing of Doors with metal door frames and door shutters made of galvanized steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM). coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of polyurethene foam (PUF) used to give the required rigidity and effective acoustic insulation with Stainless steel hardware of 6? Tower bolt ? 2 Nos., 6? D handles ? 2 Nos., 10? Aldrop ? 1 No., Butt Hinges ? 6 Nos, Mortise Lock of approved quality ? 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work for Double leaf Door. The rate also includes provision of vision or view panel of specified dimensions with single or double glass panels and providing & fixing Aluminium Extruded Section Body Tubular Type Hydraulic Door Closer (IS: 3564) with double speed adjustment with necessary accessories and screws etc. complete (Type II); also providing & fixing powder coated galvanized steel box cleat of suitable size.
19.85
-
224792.25
Primary school;Providing and laying kerb edging at or near ground level natural stone of size 200x200x300mm in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment).
13.32
-
55794.82
Primary school;CRS Masonry in CM (1:6) 2nd Sort
5
-
22678.5
Primary school;RR Masonry in CM (1:6)
10
-
38929
Primary school;Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand).
75
-
4012.5
Primary school;Brick work 7 cm thick with Fly ash F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:3 (1 cement : 3 coarse sand) in superstructure above plinth level and upto floor three level.
10
-
5399.5
Primary school;11.5 cm wide Fly Ash Brick masonry for super-structure up to floor III in C:M (1:3) using traditional size bricks of class designation of 7.5 including cost of all materials, conveyance charges, labour and all operations for constructing half brick masonry, mixing cement mortar, curing etc., complete for finished item of work.
16.87
-
11631.56
Primary school;Fly Ash Brick Masonry in CM (1:6) with class designation of 7.5 Bricks of traditional size 23 x 11 x 7 cms in walls & pillars super structure up to floor III level.
41.9
-
224771.06
Primary school;Brick Masonry in CM (1:6) with class designation of 5 red clay burnt Bricks of traditional size 23 x 11 x 7 cms in foundation and plinth.
10.8
-
66355.45
Primary school;Extra for achieving fair finish or shutter finish to the concrete surfaces to the satisfaction of Engineer In Charge.
200
-
40000
Primary school;Integral Cement Waterproofing Admixture for Concrete Slabs and mortar plastering works. ( Dosage : 100ml Per bag of 50 Kgs Cement) Complies with I.S. 2645-2003
50
-
10795
Primary school;Supplying, fitting and placing TMT bar reinforcement Fe-500D or more in foundation, plinth and superstructure up to floor three level complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded.
12.01
-
638501.01
Primary school;Supply and placing of the Ready Mix (RMC) Standard Design Mix Concrete M25 grade as per IS 4926-2003 with minimum cement content as per IS code 456-2000 using 20 mm graded metal, fine aggregate, fly ash, water and specified admixtures as per approved design mix from standard suppliers approved by the department including pumping, laying concrete, vibrating, curing etc. and also including centring & shuttering, complete but excluding cost of reinforcement --in foundation plinth & superstructure up to floor III level. - Beams
13.43
-
134737.74
Primary school;Supply and placing of the Ready Mix (RMC) Standard Design Mix Concrete M25 grade as per IS 4926-2003 with minimum cement content as per IS code 456-2000 using 20 mm graded metal, fine aggregate, fly ash, water and specified admixtures as per approved design mix from standard suppliers approved by the department including pumping, laying concrete, vibrating, curing etc. and also including centring & shuttering, complete but excluding cost of reinforcement --in foundation plinth & superstructure up to floor III level. - Slabs ( 150mm - 300mm thick) & Staircases
2.4
-
16308.72
Primary school;Supply and placing of the Ready Mix (RMC) Standard Design Mix Concrete M25 grade as per IS 4926-2003 with minimum cement content as per IS code 456-2000 using 20 mm graded metal, fine aggregate, fly ash, water and specified admixtures as per approved design mix from standard suppliers approved by the department including pumping, laying concrete, vibrating, curing etc. and also including centring & shuttering, complete but excluding cost of reinforcement --in foundation plinth & superstructure up to floor III level. - Slabs ( upto 150mm thick)
33.83
-
298399.2
Primary school;Supply and placing of the Ready Mix (RMC) Standard Design Mix Concrete M25 grade as per IS 4926-2003 with minimum cement content as per IS code 456-2000 using 20 mm graded metal, fine aggregate, fly ash, water and specified admixtures as per approved design mix from standard suppliers approved by the department including pumping, laying concrete, vibrating, curing etc. and also including centring & shuttering, complete but excluding cost of reinforcement --in foundation plinth & superstructure up to floor III level. - RCC Walls, Water Tank Walls
14.81
-
230478.1
Primary school;Supply and placing of the Ready Mix (RMC) Standard Design Mix Concrete M25 grade as per IS 4926-2003 with minimum cement content as per IS code 456-2000 using 20 mm graded metal, fine aggregate, fly ash, water and specified admixtures as per approved design mix from standard suppliers approved by the department including pumping, laying concrete, vibrating, curing etc. and also including centring & shuttering, complete but excluding cost of reinforcement --in foundation plinth & superstructure up to floor III level. - Chajjas, Sunshades
5.58
-
76882.91
Primary school;Supply and placing of the Ready Mix (RMC) Standard Design Mix Concrete M25 grade as per IS 4926-2003 with minimum cement content as per IS code 456-2000 using 20 mm graded metal, fine aggregate, fly ash, water and specified admixtures as per approved design mix from standard suppliers approved by the department including pumping, laying concrete, vibrating, curing etc. and also including centring & shuttering, complete but excluding cost of reinforcement --in foundation plinth & superstructure up to floor III level. - Lintels
6.06
-
67237.16
Primary school;Supply and placing of the Ready Mix (RMC) Standard Design Mix Concrete M25 grade as per IS 4926-2003 with minimum cement content as per IS code 456-2000 using 20 mm graded metal, fine aggregate, fly ash, water and specified admixtures as per approved design mix from standard suppliers approved by the department including pumping, laying concrete, vibrating, curing etc. and also including centring & shuttering, complete but excluding cost of reinforcement --in foundation plinth & superstructure up to floor III level. - Columns
7.37
-
82576.55
Primary school;Supply and placing of the Ready Mix (RMC) Standard Design Mix Concrete M25 grade as per IS 4926-2003 with minimum cement content as per IS code 456-2000 using 20 mm graded metal, fine aggregate, fly ash, water and specified admixtures as per approved design mix from standard suppliers approved by the department including pumping, laying concrete, vibrating, curing etc. and also including centring & shuttering, complete but excluding cost of reinforcement --in foundation plinth & superstructure up to floor III level. - Plinth Beams
11.56
-
109003.13
Primary school;Supply and placing of the Ready Mix (RMC) Standard Design Mix Concrete M25 grade as per IS 4926-2003 with minimum cement content as per IS code 456-2000 using 20 mm graded metal, fine aggregate, fly ash, water and specified admixtures as per approved design mix from standard suppliers approved by the department including pumping, laying concrete, vibrating, curing etc. and also including centring & shuttering, complete but excluding cost of reinforcement --in foundation plinth & superstructure up to floor III level - Piles
11
-
50231.19
Primary school;RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete and also including centring & shuttering but excluding cost of steel and its fabrication charges for finished item of work in bed blocks, bands, copings, window sills & like, etc.
3.62
-
32902.97
Primary school;Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineerin- charge).
1.2
-
7530.96
Primary school;Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
51
-
22501.2
Primary school;Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
14.2
-
1375.78
Primary school;Damp proof course 50mm thick with 1:2:4 cement concrete Nominal mix, using 12mm hard broken stone aggregate including cost of all materials, excluding conveyance charges of materials including the cost of machinery, labour charges, mixing, placing in position, leveling, vibrating, curing etc. complete for finished item of work (Using concrete mixer).
14.2
-
3753.92
Primary school;Plain Cement concrete (M 20) Nominal Mix using 20mm metal using concrete mixer in bed blocks, bands, copings, window sills & like etc including centring & shuttering.
7.75
-
53837.44
Primary school;Providing and Laying M10 with PCC(1:3:6) using 40 mm down metal with concrete mixture including cost and convayance of all materials, labour charges, machine mixing and curing charges etc., complete as per ss -- all works in plinth & superstructure.
24.2
-
99713.68
Primary school;Plain Cement concrete (1:4:8) using 40mm HBG metal including cost and conveyance of all materials, labour charges for laying, vibrating, curing etc., upto plinth level.
13.9
-
54513.02
Primary school;Plain Cement concrete (1:5:10) using 40 mm metal with Concrete mixture. All work upto plinth level.
9.12
-
34225.64
Primary school;Pre construction Anti termite is a process in which chemical toxic to subterrean termites is apply/ inject into soil during early stage of building Construction 2. Treatement of soil Beneath the building and around the foundations conduct and chemical use as per BIS - IS 6313 (Part -2) 2013 code specification & CIB RC registered termiticide which creates a continuous chemical barrier beneath the building which kills or repels terminates & impervious to tremite entry. 3. Imidacloprid 30.5% SC (IS 63131) dissolve 2.1 Ml/1 liter of water and apply emulsion/solution @ 7.5 Litres/Square meter (Sqm) of internal, external vertical surface of the colums , plinth beams (Back filling) walls and floor junction, external perimeters, along reatining wall @ 5.0 Liters/Sqm of the horizontal surface of basement top surface of the basement filling below flooring bed (Plinth) & @ 2.0 Litres/ Line meter at expansion joints. The substructure of a depth of 500mm around coulmns & 300mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc. cost & Conveyance of all materials to the site, cost of labour for sparying, rodding etc. complete for furnished item of work as per the approval of the Engineer-in-charge
182
-
31012.8
Primary school;Supply and Filling of crusher Stone dust less than 3mm and fines not more than 10% in foundation trenches, plinth and path ways including cost and conveyance off all materials and all labour charges ramming,watering etc, as per drawing and technical specification of MORTH.
31.6
-
35183.44
Primary school;Supply and Filling of gravel and Filling in foundation trenches, plinth and path ways including cost and conveyance off all materials and all labour charges ramming, watering etc, as per drawing and technical specification MORD & MORTH (as per Std Data Ammendements).
31.6
-
21149.88
Primary school;Supply available sand at an average lead of 8 Km and Filling in foundation trenches, plinth and path ways including conveyance off all materials and all labour charges ramming, watering etc, as per drawing and technical specification as per MORTH.
63.13
-
20883.73
Primary school;Supply available earth material at an average lead of 8 Km and Filling in foundation trenches, plinth and path ways including conveyance off all materials and all labour charges ramming, watering etc, as per drawing and technical specification as per MORTH.
94.8
-
31359.84
Primary school;Filling with useful available excavated material - earth or sand (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick. Consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work (APSS No 309 & 310) - Earth filling (ordinary soil)
171.68
-
5923.1
Primary school;Earth work excavation in all types soils for pipe lines, for drainage and water supply, where the depth is less than 1.5 times the width.
36
-
8424
Primary school;Under-reaming for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils with Augoring and boring equipment in site as per IS 2911 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diametres. For Under Reamer - 350mm to 450 mm dia - DOUBLE UNDER REAMING
24
-
12650.4
Primary school;Under-reaming for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils with Auguring and boring equipment in site as per IS 2911 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diametres. For Under Reamer - up to 300 mm dia - Single UNDER REAMING
19
-
7107.9
Primary school;Auguring and boring of holes in site for BORED CAST-IN-SITU R.C.C PILES for building foundation in loamy, clayey soils like black cotton soils and ordinary soils without under reams as per is 2911-1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and finished item of work for piles of following diameters.-For Piles UP to 350 mm dia TO 450 MM DIA
54
-
22761
Primary school;Auguring and boring of holes in site for BORED CAST-IN-SITU R.C.C PILES for building foundation in loamy, clayey soils like black cotton soils and ordinary soils without under reams as per is 2911-1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and finished item of work for piles of following diameters.-For Piles UP to 300 mm dia.
80.46
-
28273.64
Primary school;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal of the excavated material with a lead of minimum 1 KM, dressing of sides and bottom and ramming of bottom etc all complete per Technical Specification 305 MORD / 304 MORTH-Earthwork in excavation -
171.68
-
22954.15
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements