Andhra Pradesh Capital Region Development Authority Tender

work;Supply & Installation,Testing and commissiioning of trolley mounted, electrically operated triplex plunger pumps with 2-H.P, 1-Phase 1450 rpm, 1-phase motor with high pressure triplex pump of 5 kg/sq cm with nylon hydralic hose pipe of 3/4" dia, 5mt height for suction and 3/8" dia 30mt length for delivery with all required nozzles has values, high pressure gun, fitings etc with come of 3-core,2.5 sqmm flexable copper cable with 3-pin 16A top and all required accessories amd labour charges for erection, testing including transportation etc. complete with required accessories including all labour charges for finished item of work as directed by Engineer In Charge, Make of motor: Crompton, Kirloskar, Texmo, KSB,CRI, Suguna with ISI mark. Pump:Green tech,Kisan,Ultrajet, Pressurejet, Ambica tools, Seaara or any ISI or equivalent make as approved by the competent authority.

work;Supplying and wrapping the anticorrosive material for buried pipes with coating of Primer and wrapping with 4 mm thick polymer corrosion resistant tape as per IS : 10221 with 15 mm overlap as per specificatios for 150mm dia pipe-Makes: IWL(PIPE KOT) or equivalent make as approved by the competent authority.

work;Providing , laying, testing & Commissioning of 150mm dia C class MS pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete. Makes: Jindal / Tata pipes/Prakash Surya or equivalent make as approved by the competent authority.

work;Supply and Installation of Underdeck Insulation with 50 mm thk EPS, 48 Kg/Cum density, factory laminated faced alumimun foil coreved with GI cross wiring. Make: Beard shell or equivalent make as approved by the competent authority.

work;Supply and Installation of GI Fusible link Fire dampers 500 mm long with sleeve as per UL 555 Standard,Minimum width of damper shall be 225 mm. Make: System Air/Citizen or equivalent make as approved by the competent authority.

work;Supply, installation and testing of Canvas connection for the Treated Fresh Air units to the duct of reputed make as approved by the competent authority.

work;Supply , Erection and Testing of GI Opposed blade Volume control dampers made out of 18G frame and 20G blades. Make: System Air/Citizen or equivalent make as approved by the competent authority.

work;Supply , Erection of Fresh air louver with extruded aluminium grill with SS wire mesh and GI volume control damper with 20 micron filters Make: System Air/Citizen or equivalent make as approved by the competent authority.

work;Supply, Installation, Testing and commissioning of extruded Aluminum powder coated grills/ diffusers for supply with removable core type with collar damper Make: System Air/Citizen or equivalent make as approved by the competent authority.

work;Supply &Fixing of 13mm Thick Duct Thermal Insulation applied outside of the duct work with All. backed Closed cell nitrile/ Cross linked foam duly fixed with adhesive and tapes. Makes: Aflex, Kflex or equivalent make as approved by the competent authority.

work;Supply & Fixing of 10/15mm thick Duct Accoustic Insulation applied inside of the duct work with All. backed Open cell nitrile duly fixed with adhesive and tapes Makes: Aflex, Kflex or equivalent make as approved by the competent authority.

work;Supply, installation, testing & commissioning of 22G GSS Ducting with required angle flanges & installation materials such as heavy duty supports by anchor fasteners etc as required asper IS 655 /SMACNA Standards Makes:TATA/Jindal or equivalent make as approved by the competent authority.

work;Supply, installation, testing & commissioning of 24G GSS Ducting with required angle flanges & installation materials such as heavy duty supports by anchor fasteners etc as required asper IS 655 /SMACNA Standards Makes:TATA/Jindal or equivalent make as approved by the competent authority.

work;Supply, installation, testing &commissioning of Stand alone, intelligent Touch controller with Display for controlling the indoor & outdoor units from a Remote place for all the circuits. Makes: Daikin

work;Installation, testing & commissioning of Indoor Units consisting of 2/3/4 row deep DX coil, filter, blower section and drive arrangement, initial charge of refrigerant & oil, integral refrigerant piping, electronic expansion valve, electrical panel with controls duly wired, thermostatic control corded/cordless remote controller supports for indoor units etc.

work;Supply, Installation, testing and commissioning of 1650 CFM & 25mm ESP Double skin type Ceiling suspended units complete with double skin (43±2 mm) insulated with CFC free polyurethane foam (PUF) panels of 42 Kg/cum density. Sandwitched between 0.8 mm thick G.I. Sheets. Outer skin shall be precoated G.I. sheet and internal skin shall be powder coated G.I. sheet suitable for VRV/VRF application. The unit shall be provided with DIDW/PLUG fan, IE3 Motor, minimum 3/4 row cooling coil and drain pan with 18 mm thick nitrile rubber insulation, inlet filter section with MERV-8 filters, drive set & guard, spring isolator to avoid transmission of vibration,etc. The unit shall contain initial charge of refrigerant & oil, integral refrigerant piping, electronic expansion valve, electrical panel with controls, duly wired, thermostatic control and distributor Refrigerant Kit to be connected to VRV ODU. The noise of the unit shall not exceed more than 70 dBA at 1m distance from the unit and at maximum operating speed . The height of the unit shall not exceed 600 mm. Cooling Coil should be certified by AHRI 410 Fan and motor with Class F insulation. The unit shall have boxing arrangemnt for connection of Fresh Air duct and shall have provision for removal and cleaning of filter.Makes : CITIZEN/ZECO/EDGETECH or equivalent make as approved by the competent authroity. Note: The Necessary DesignCalulations if any required for the same shall be submitted by the agency and approved by Competanat authority.

work;Supply ,Installation and Testing and commissioning of indoor 1 pair multimode [62.5/125um ] glass Fiber Optic Patch Cords of One mtr length as per latest ammendments of TIA /EIA 568B.3 and IEC 794 Standard Specifications including ST II / SC/FC/MT/PC connectors at both ends as per requirements. Makes: Systimax /AMP/Panduit/ Siemond/Molex/Legrand or equivalent make as approved by the competent authority.

work;Supply installation testing and commisioning 6 fiber Outdoor, steel tape armoured multimode[62.5/125um ] glass Fiber Optic Cable as per latest ammendments of TIA /EIA 568B.3 , GR 20 CORE/ UEC 794-1/ EN 187000 Standards in existing MS/PVC Conduits/ hume pipe including making terminations to active passive equipments with ferruling at both ends for identification with necessorry tools for Terminations and testing required.Makes: Systimax /AMP/Panduit/ Siemond/Molex/Legrand or equivalent make as approved by the competent authority.

work;Supply,laying ,testing and commisioning of 4-pair, Cat6 UTP Solid (Third party ETL Intertek tested 600 MHZ above) to support 1Gbps with Cross (+) filler pair seperator & PVC sheath 23 AWG, STP/UTP Cable , Meets or exceeds ANSI/TIA-568-C.2 and UL Listed &RoHS Compliant in the existing raceways /pvc conduits including making connections to information outlets and patch panels with ferruling at both ends for identifiation with necessary tools for punching stripping crimping and testing required etc., complete. Makes: Systimax /AMP/Panduit/ Siemond/Molex/Legrand or equivalent make as approved by the competent authority.

work;Supply and laying of 4C x 0.75 sqmm Shielded unarmoured Cable, as per the survey done, Rate shalinclude required accessories, tools and tackles, transportation, material and labour etc., complete as instructed by Engineer In charge. The contractor should follow the safety measures inside the premises.Makes :- Finolex/RR kabel/ Havells/ KEI/ Polycab or equivalent make as approved by the competent authority.

work;Supply and installation of Door Buzzer, Rate shainclude required accessories, tools and tackles, transportation, material and labour etc., completinstructed by Engineer In charge. The contractorshould follow the safety measures inside the premises. Make : Rosslare/Software house/Spectrum\ or equivalent make as approved by the competent authority.

work;Supply and installation of Proximity card readers based on RFID technology, along with Back Plate including all fixing accessories. Rate shall include required accessories, tools and tackles, transportation, material and labour etc., complete as instructed by Engineer In charge. The contractor should follow the safety measures inside the premises. Makes:Matrix/Honeywell/Siemens/JohnsonControls/Bosch or equivalent make as approved by the competent authority.

work;Supply and installation of Exit Push Button (Egress Switch), Rate shall include required accessories, tools and tackles, transportation, material and labour etc., complete as instructed by Engineer In charge. The contractor should follow the safety measures inside the premises. Makes:Matrix/Honeywell/Siemens/JohnsonControls/Bosch or equivalent make as approved by the competent authority.

work;Supply and installation of Single Leaf 600 Lbs Magnetic Lock with required mounting accessories, Rate shall include required accessories, tools and tackles, transportation, material and labour etc.,complete as instructed by Engineer In charge. The contractor should follow the safety measures inside the premises. Makes: Matrix/Honeywell/Siemens/JohnsonControls/Bosch or equivalent make as approved by the competent authority.

work;Supply and installation of Double Leaf Magnetic Lock with required mounting accessories, Rate shall include required accessories, tools and tackles, transportation, material and labour etc., complete as instructed by Engineer In charge. The contractor should follow the safety measures inside the premises. Makes: Matrix/Honeywell/Siemens/JohnsonControls/Bosch or equivalent make as approved by the competent authority.

work;Supply, installation, testing and commissioning of Fingerprint and Card based Door Controller cum reader ? Fingerprint and Card based Door Controller for Access Control and Time-Attendance? Optical Fingerprint and EM Proximity Card based Reader ? IP65 Rating ? 50,000 Events and 9,600 Fingerprint Template Storage ? Built-In Power over Ethernet (PoE) ? Built-In Door Lock Port, Door Sense Port, Exit Reader Port, Exit Switch Port, RS-485 and Ethernet Interfaces? 12VDC Power Supply through Adaptor or Battery Backup ? Wiegand/RS-232 Interface ? IP65 Rating ? Tamper Detection ? Tri Color LED and Buzzer 12VDC Power Supply through Adaptor or Battery Backup etc. This controllers to be integrated with the existing Judicial complex access control system as per detailed technical specifications and approved make including all charges complete etc as directed by Engineer Incharge/ departmental authorities. makes: CosecMatrix/Honeywell/Siemens/JohnsonControls/Bosch or equivalent make as approved by the competent authority.

work;Supply and fixing of Cable route Indicators of size 152mm round / 102mm x 102mm / 152mm x 152mm of reputed make as approved by the comepetent authority.

work;Supply and Fixing of 25mm dia Nominal bore medium grade GI Pipe on Surface duly threading at Joints with all required accessories fixing with chromium plated base saddles for run of mains including cost of all materials, accessories and all labour charges etc., complete of reputed make as approved by the comepetent authority.

work;Supply & Fixing of D.O.L Starter 415V, 3 phase, 50Hz. enclosed with no volt coil and overload protection with necessary materials, etc., complete suitable upto 7.5.HP. Makes: Siemens / Crompton / L&T (MK2 DOL) or equivalent make as approved by the comepetent authority.

work;Supply and installation of Secure make, offline Energy meters data downloading software with licensed key authorised to use by 2 users, software shall be provided over server based to download and install, utilize the same through valid key supplied by service provider at any point of time and software shall be valid for a period of 1800 days from the date of activiation of key. Model: M-Cubed.

work;Design, fabrication, assembling of Main LT Panel with wiring, supply, testing at works, packaging, forwarding to site, Installation, testing and commissioning of Cubicle type LT panel, fabricated out of 14 gauge CRCA sheet steel in cubicle formation, compartmentalized, Form 4B construction suitable for 415 V 3 phase 4 wires 50 Hz AC supply system fabricators in compartmentalized preferable design from CRCA sheet steel of 2mm thick for frame work and covers,3 mm thickness for Gland plates i/c cleaning and finishing complete with 7 Tank process for powder coating approved shade,TPN Aluminium alloy busbars of high conductivity, protection, free standing, floor mounting, dust and vermin proof ,indoor, entire panel shall having a common aluminium earth bar with 2 Nos earthing terminals, Alumnium bus bar and control wiring with 2.5 sqmm PVC Insulated copper conductor S/C Cable. extensible on both sides, interconnections with suitable size of indicating lamps etc. as required. with 1 set of CBCT, ELR etc are required. Lifting hooks shall also be provided in case of large panels. Approval shall be taken for each panel in the form of shop drawings before fabrication. Galvanised hardwares with zinc passivation shall be used in fabrication of panels. MP based release to be provided for above 250A breakers including suitable rated APFCR modules inbuilt as required. INCOMER- 1 Nos. ACB,1250 Amps, 50 kA, FP, (Motorised)-EB Incomer-1, 1 Nos. ACB, 1000 Amps, 50 kA, FP, (Motorised)-DG Incomer, 1 Nos. ACB, 1250 Amps, 50 kA, FP, (Motorised)-EB Incomer-2, 1 Nos. MCCB, 250 Amps, 25 kA, FP, -Solar Incomer-Each Incomer shall have one set of the following items: All EB incoming feeders ( 1 & 2) must have 1 No. LT Bi-directional Energy meter with import & export data consisitng of optical port-Secure make Premier 300 -Energy Meter & Muiltifunction meters shall be minimum 45 days energy recording type Intelligent multi function digital meter of suitable range to read V,A,KVA, KVAH, KWAH, KW, KVAR, PF, Hz etc with communication facility (RS 485/RS 232 port) and other Incoming feeders (DG & Solar) must have Muiltifunction meters shall be minimum 45 days energy recording type Intelligent multi function digital meter of suitable range to read V,A,KVA, KVAH, KWAH, KW, KVAR, PF, Hz etc with communication facility (RS 485/RS 232 port) display with required Nos CTs, 15 VA, class 0-5 and control circuit wiring with HRC control fuses.CTs for APFCR .Digital Voltmeter suitable range for 3 phase, 4 wire operation with LED display and built-in selector switch along with 3 nos of MCB control.1 Set of Indication Lamps, LED type, R,Y,B and breaker 'ON' , 'OFF', 'TRIP' & spring charged lamps.1 Set of Electrical & Mechanical Interlocking between Incomers and Bus Coupler-1 No.s of 1250A 4P ACB Bus Coupler-All Meters with RS 485 port-With suitable Surge Protection Device (SPD) & space heater for chambers as required-Bus Bars-1600 Amps TPN Aluminium,65 kA (Extendible type for future purpose on both sides)-Outgoings-1 Nos ACB 630A, 4P, 50 kA, 4 Nos. MCCB, 630A, 4P, 36 kA , 3 Nos. MCCB, 400A, 4P, 36 kA, 3 Nos. MCCB, 250A, 4P, 25 kA , 8 Nos. MCCB, 160A, 4P, 25 kA, 8 Nos. MCCB, 125A, 4P, 25 kA, 8 Nos. MCB, 63A, 4P, 25 kA, 200 KVAR IN BUILT CAPACITOR BANK WITH 7% DETUNED REACTORS-2 Nos. 50 KVAR, 4 Nos. 25 KVAR MPP type, each bank shall have 7% detuned filters.2 Nos.100 A TP MCB, 4 Nos 63 A TP MCB capacitor duty contactor Nos with over load relays.6 Sets of Indicating lamps (LED type) for capacitor ON (Green) & capacitor OFF (Red) -Complete in all respect including all interconnections from the bus bars to MCB and MCB to contactor and contactor to terminal blocks of Capacitor. Automatic Switching "ON" and "OFF" capacitor panel described as above & 1 Lot of control wiring.1 Set of designation plates complete etc as required for finished item of work, panel shall be desinged to operate on 24V/110V DC supply etc complete as directed by Engineer-In-Charge of approved make or equivalent make as approved by the competent authority. Note: The sizing of the panel and its design shall be submitted by contractor as per site conditions and the same shall be approved by the competent authority.

work;Supply, fabricating , installing structural steel supports for fixing all sizes of MS pipes from ceiling / wall with MS Channels, Angles, Flats, Rods, as required at site with anchor fasteners, Clamps, threaded rods, nuts, bolts,washers etc complete with painting of reputed make as approved by the comepetent authority.

work;Supply and fixing of PVC synthetic elastomer electrically insulated mat conforming to IS: 15652 with Class C Type - 3.0 mm thickness of reputed make as approved by the comepetent authority.

work;Supply and fixing of PVC synthetic elastomer electrically insulated mat conforming to IS: 15652 with Class A Type - 2.0 mm thickness of reputed make as approved by the comepetent authority.

work;Supply and fixing of First Aid box 18" x 12" x 8" of reputed make as approved by the comepetent authority.

work;Supply and fixing of Fire bucket stand fabricated by M.S. angles to install for Four numbers of buckets as per local fire officers standards of reputed make as approved by the comepetent authority.

work;Supply and fixing of 4Nos of 9 Ltrs capacity round bottom sand buckets along with bucket sand, Fire buckets with round bottom type enamel painted, white inside & red out side and letter FIRE inblack out side & Handle with mounting bracket of reputed make as approved by the comepetent authority.

work;Supplying and fixing of 415/433V Danger Notice Plates of size -220mm x 150mm shall comply with IS:2551 of reputed make as approved by the comepetent authority.

work;Supplying and fixing of 33KV Danger Notice Plates of size -250mm x 200mm shall comply with IS:2551 of reputed make as approved by the comepetent authority.

work;Supplying and fixing of Shock instrution chart in English /Hindi / Telugu duly framed with front glass of reputed make as approved by the comepetent authority.

work;Supply of Rubber hand gloves suitable for 33KV of reputed make as approved by the comepetent authority

work;Supply, instalation, testing and commisioning of Out door type -IP 66 Canopy for 1250 Amp, sandwitch Busduct system made of 14G CRCA sheet/Hot Galvanized steel encloser.Makes: As approved by the comepetent authority

work;Supply and Fixing of 1250 Amps Copper Flexibles for three phases and neutral for Air Insulated / sandwitchBusduct Makes: Legrand (Zucchini) / L&T Schneider/C&S/Advance-Anant or equivalent make as approved by the competent authority.

work;Supply and Fixing of 1250 Amps Horizontal / Vertical bends for sandwitch Bus Duct .Makes: Legrand (Zucchini) / L&T Schneider/C&S/Advance-Anant or equivalent make as approved by the competent authority.

work;Supply, instalation, testing and commisioning of 1250 Amps TPN Aluminium 50-75 kA breaking capacity (100% Neutral busbar) sandwitch Busduct system made of CRCA sheet/Hot Galvanized steel encloser of thickness not less than 1.5mm having degree of protection of IP 55/IP 65 as per IEC/EN 61439-6, PVC/Plastic insulated reinforced with glass fibre four strip ALUMINIUM busbar in convinent sections including end cover units suitable for 415 volts 3 phase, 4 wire, 50 Hz A.C. System,etc., with necessary joints Fire barrrier at each floor Provision of tapping at each floor/every meter,continuous earthing with 2 nos alluminium strip of suitable size (one on each side0 including GI clamping brackets,angle iron brackets,steel fastners,connecting to earth system as required etc complete as directed by Engineer In Charge. Makes: Legrand (Zucchini) / L&T Schneider/C&S/Advance-Anant or equivalent make as approved by the competent authority.

work;Design, fabrication, assembling, wiring, supply, testing at works, packaging, forwarding to site, Installation, testing and commissioning of Out door type -IP 66 Cubicle type LT panel, fabricated out of 14 gauge CRCA sheet steel in cubicle formation, compartmentalized, Form 3B/4B construction suitable for 415 V 3 phase 4 wires 50 Hz AC supply system fabricators in compartmentalized preferable design from CRCA sheet steel of 2mm thick for frame work and covers,3 mm thickness for Gland plates i/c cleaning and finishing complete with 7 Tank process for powder coating approved shade,TPN Aluminium alloy busbars of high conductivity, protection, free standing, floor mounting, dust and vermin proof ,indoor, entire panel shall having a common aluminium earth bar with 2 Nos earthing terminals, Alumnium bus bar and control wiring with 2.5 sqmm PVC Insulated copper conductor S/C Cable. extensible on both sides, interconnections with suitable size of indicating lamps etc. as required. with 1 set of CBCT, ELR etc are required. Lifting hooks shall also be provided in case of large panels. Approval shall be taken for each panel in the form of shop drawings before fabrication. Galvanised hardwares with zinc passivation shall be used in fabrication of panels with 1 Nos. ACB,1250 Amps, 50 kA, FP, (Motorised). Each Incomer shall have one set of the following items: 1 No. LT Bi-directional Energy meter with import & export data consisitng of optical port-Secure make Premier 300 -Energy Meter & /Muiltifunction meters shall be minimum 45 days energy recording type Intelligent multi function digital meter of suitable range to read V,A,KVA, KVAH, KWAH, KW, KVAR, PF, Hz etc with communication facility (RS 485/RS 232 port) display with required Nos CTs, 15 VA, class 0-5 and control circuit wiring with HRC control fuses .Digital Voltmeter suitable range for 3 phase, 4 wire operation with LED display and built-in selector switch along with 3 nos of MCB control.1 Set of Indication Lamps, LED type, R,Y,B and breaker 'ON' , 'OFF', 'TRIP' & spring charged lamps-All Meters with RS 485 port-With suitable Surge Protection Device (SPD) & space heater for chambers as required-Bus Bars-1600 Amps TPN Aluminium,65 kA (Extendible type for future purpose on both sides). Automatic Switching "ON" and "OFF" capacitor panel described as above & 1 Lot of control wiring.1 Set of designation plates complete etc, panel shall be desinged to operate on 24V/110V DC supply complete etc as required for finished item of work as directed by Engineer-In-Charge of approved make or equivalent make as approved by the competent authority. Note: The sizing of the panel & its design shall be submitted by contractor as per site conditions and the same shall be approved by the competent authority.

work;Supply and Fixing of 32mm (1.90 - 2.10)mm thickness outer dia medium grade with IS:9537 part 3 FRLS regid PVC pipe with all accessories fixing on chromium plated metallic base saddles on walls for switches for Light, Fan and separate plug point including all labour charges etc., complete. Makes : Precision/VIP / GoldMedal / Sudhakar /Polycab or euivalent make as approved by the competent authority.

work;Supply and Fixing of 25mm (1.60 -1.80)mm thickness outer dia medium grade with IS:9537 part 3 FRLS regid PVC pipe with all accessories fixing on chromium plated metallic base saddles on walls for switches for Light, Fan and separate plug point including all labour charges etc., complete (for electrical & ELV works). Makes : Precision/VIP / GoldMedal / Sudhakar /Polycab or euivalent make as approved by the competent authority.

work;Supply and Fixing of 20mm (1.40 -1.55)mm thickness outer dia medium grade with IS:9537 part 3 FRLS regid PVC pipe with all accessories fixing on chromium plated metallic base saddles on walls for switches for Light, Fan and separate plug point including all labour charges etc., complete (for electrical & ELV works). Makes : Precision/VIP / GoldMedal / Sudhakar /Polycab or euivalent make as approved by the competent authority.

work;Supply and run of 3 of 56/0.3mm (4.0 Sqmm) FRLS/ FRLS-H / HFFR PVC insulated 1100V grade as per IS : 694 specification for Copper cable in existing pipe for power wiring inlcuding all labour charges etc., complete.Makes:Finolex / RR kabel / Havells/KEI/Polycab or euivalent make as approved by the competent authority.

work;Supply and run of 3 of 36/0.3mm (2.5 Sqmm) FRLS/ FRLS-H / HFFR PVC insulated 1100V grade as per IS : 694 specification for Copper cable in existing pipe for circuit wiring inlcuding all labour charges etc., complete.Makes:Finolex / RR kabel / Havells/KEI/Polycab or euivalent make as approved by the competent authority.

work;Supply and run of 3 of 22/0.3mm (1.5 Sqmm) FRLS/ FRLS-H / HFFR PVC insulated 1100V grade as per IS : 694 specification for Copper cable in existing pipe for point wiring inlcuding all labour charges etc., complete.Makes:Finolex / RR kabel / Havells/KEI/Polycab or euivalent make as approved by the competent authority.

work;Supply of 3 Modular Hot Dip galvanized 20/18 SWG Module box with earthing terminal with 3 Modular Cover Frame. in front on surface or in recess, including providing and fixing of 1 nos 20A 1 Way 1 Module Modular Switch with indicator and 1 nos of 20A Modular Socket with shutter including connection, painting etc as required and as directed by Engineer In-Charge. Makes Legrand (Arteor) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or equivalent make as approved by the competent authority.

work;Supply and fixing of 3 Modular Hot Dip galvanized 20/18 SWG Module box with earthing terminal with 3 Modular Cover Frame. in front on surface or in recess, including providing and fixing of 1 nos 16A / 20A 1 Way 1 Module Modular Switch and 1 nos of 16A/6A 1 way Combi Socket Modular Socket with shutter including connection, painting etc as required and as directed by Engineer In-Charge. Makes: Legrand (Arteor) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or equivalent make as approved by the competent authority.

work;Supply and fixing of 3 Modular Hot Dip galvanized 20/18 SWG Module box with earthing terminal with 3 Modular Cover Frame. in front on surface or in recess, including providing and fixing of 1 nos 6A / 10A 1 Way 1 Module Modular Switch and 1 nos of6A / 10A 3/2 Pin 2 Module Modular Socket with shutter including connection, painting etc as required and as directed by Engineer In-Charge. Makes: Legrand (Arteor) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or equivalent make as approved by the competent authority.

work;Supply and fixing of 1 Modular Hot Dip galvanized 20/18 SWG Module box with earthing terminal with 1 Modular Cover Frame. in front on surface or in recess, including providing and fixing of 1 nos 6A / 10A 1 Way 1 Module Modular Switch including connection, painting etc as required and as directed by Engineer In-Charge. Makes: Legrand (Arteor) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or equivalent make as approved by the competent authority.

work;Supply, wiring, testing and commissioning of Point Wiring for ( Light/ ceiling Fan/ exhaust fan & 6A socket) with 2 runs of 1.5 Sqmm + 1 run of 1.5 Sqmm FRLS PVC insulated 1100V grade multistrand Copper conductor wires, run in and including 20mm (1.40 -1.55)mm thickness ISI approved PVC conduits concealed in wall / ceiling or surface wiring (wiring should be conforming to IS 732 ) including all accessories such as junction boxes, conduit , bends,elbows and ceiling rose, with metal boxes, modular type switches , socket, Electronic fan regulators and the box covered with front plate, along with all necessary fixing accessories like mounting screws .clamps etc. Makes: For PVC Pipe: Precision/VIP / GoldMedal / Sudhakar /Polycab/. For Modualr Switches & Accessories & GI Modular box- Legrand (Arteor) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano For PCV Copper Wire-FRLSH- Finolex /RR kabel / HavellsKEI/Polycab or equivalent make as approved by the competent authority. Two way lights points controlled by one No.2 Way 6 Amps switch

work;Supply, wiring, testing and commissioning of Point Wiring for ( Light/ ceiling Fan/ exhaust fan & 6A socket) with 2 runs of 1.5 Sqmm + 1 run of 1.5 Sqmm FRLS PVC insulated 1100V grade multistrand Copper conductor wires, run in and including 20mm (1.40 -1.55)mm thickness ISI approved PVC conduits concealed in wall / ceiling or surface wiring (wiring should be conforming to IS 732 ) including all accessories such as junction boxes, conduit , bends,elbows and ceiling rose, with metal boxes, modular type switches , socket, Electronic fan regulators and the box covered with front plate, along with all necessary fixing accessories like mounting screws .clamps etc. Makes: For PVC Pipe: Precision/VIP / GoldMedal / Sudhakar /Polycab/. For Modualr Switches & Accessories & GI Modular box- Legrand (Arteor) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano For PCV Copper Wire-FRLSH- Finolex /RR kabel / HavellsKEI/Polycab or equivalent make as approved by the competent authority.- Eight light points controlled by 1No 6A Switch

work;Supply, wiring, testing and commissioning of Point Wiring for ( Light/ ceiling Fan/ exhaust fan & 6A socket) with 2 runs of 1.5 Sqmm + 1 run of 1.5 Sqmm FRLS PVC insulated 1100V grade multistrand Copper conductor wires, run in and including 20mm (1.40 -1.55)mm thickness ISI approved PVC conduits concealed in wall / ceiling or surface wiring (wiring should be conforming to IS 732 ) including all accessories such as junction boxes, conduit , bends,elbows and ceiling rose, with metal boxes, modular type switches , socket, Electronic fan regulators and the box covered with front plate, along with all necessary fixing accessories like mounting screws .clamps etc. Makes: For PVC Pipe: Precision/VIP / GoldMedal / Sudhakar /Polycab/. For Modualr Switches & Accessories & GI Modular box- Legrand (Arteor) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano For PCV Copper Wire-FRLSH- Finolex /RR kabel / HavellsKEI/Polycab or equivalent make as approved by the competent authority. Seven light points controlled by 1No 6A Switch

work;Supply, wiring, testing and commissioning of Point Wiring for ( Light/ ceiling Fan/ exhaust fan & 6A socket) with 2 runs of 1.5 Sqmm + 1 run of 1.5 Sqmm FRLS PVC insulated 1100V grade multistrand Copper conductor wires, run in and including 20mm (1.40 -1.55)mm thickness ISI approved PVC conduits concealed in wall / ceiling or surface wiring (wiring should be conforming to IS 732 ) including all accessories such as junction boxes, conduit , bends,elbows and ceiling rose, with metal boxes, modular type switches , socket, Electronic fan regulators and the box covered with front plate, along with all necessary fixing accessories like mounting screws .clamps etc. Makes: For PVC Pipe: Precision/VIP / GoldMedal / Sudhakar /Polycab/. For Modualr Switches & Accessories & GI Modular box- Legrand (Arteor) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano For PCV Copper Wire-FRLSH- Finolex /RR kabel / HavellsKEI/Polycab or equivalent make as approved by the competent authority. Six light points controlled by 1No 6A Switch

work;Supply, wiring, testing and commissioning of Point Wiring for ( Light/ ceiling Fan/ exhaust fan & 6A socket) with 2 runs of 1.5 Sqmm + 1 run of 1.5 Sqmm FRLS PVC insulated 1100V grade multistrand Copper conductor wires, run in and including 20mm (1.40 -1.55)mm thickness ISI approved PVC conduits concealed in wall / ceiling or surface wiring (wiring should be conforming to IS 732 ) including all accessories such as junction boxes, conduit , bends,elbows and ceiling rose, with metal boxes, modular type switches , socket, Electronic fan regulators and the box covered with front plate, along with all necessary fixing accessories like mounting screws .clamps etc. Makes: For PVC Pipe: Precision/VIP / GoldMedal / Sudhakar /Polycab/. For Modualr Switches & Accessories & GI Modular box- Legrand (Arteor) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano For PCV Copper Wire-FRLSH- Finolex /RR kabel / HavellsKEI/Polycab or equivalent make as approved by the competent authority. Five light points controlled by 1No 6A Switch

work;Supply, wiring, testing and commissioning of Point Wiring for ( Light/ ceiling Fan/ exhaust fan & 6A socket) with 2 runs of 1.5 Sqmm + 1 run of 1.5 Sqmm FRLS PVC insulated 1100V grade multistrand Copper conductor wires, run in and including 20mm (1.40 -1.55)mm thickness ISI approved PVC conduits concealed in wall / ceiling or surface wiring (wiring should be conforming to IS 732 ) including all accessories such as junction boxes, conduit , bends,elbows and ceiling rose, with metal boxes, modular type switches , socket, Electronic fan regulators and the box covered with front plate, along with all necessary fixing accessories like mounting screws .clamps etc. Makes: For PVC Pipe: Precision/VIP / GoldMedal / Sudhakar /Polycab/. For Modualr Switches & Accessories & GI Modular box- Legrand (Arteor) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano For PCV Copper Wire-FRLSH- Finolex /RR kabel / HavellsKEI/Polycab or equivalent make as approved by the competent authority. Four light points controlled by 1No 6A Switch

work;Supply, wiring, testing and commissioning of Point Wiring for ( Light/ ceiling Fan/ exhaust fan & 6A socket) with 2 runs of 1.5 Sqmm + 1 run of 1.5 Sqmm FRLS PVC insulated 1100V grade multistrand Copper conductor wires, run in and including 20mm (1.40 -1.55)mm thickness ISI approved PVC conduits concealed in wall / ceiling or surface wiring (wiring should be conforming to IS 732 ) including all accessories such as junction boxes, conduit , bends,elbows and ceiling rose, with metal boxes, modular type switches , socket, Electronic fan regulators and the box covered with front plate, along with all necessary fixing accessories like mounting screws .clamps etc. Makes: For PVC Pipe: Precision/VIP / GoldMedal / Sudhakar /Polycab/. For Modualr Switches & Accessories & GI Modular box- Legrand (Arteor) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano For PCV Copper Wire-FRLSH- Finolex /RR kabel / HavellsKEI/Polycab or equivalent make as approved by the competent authority. Three light points controlled by 1No 6A Switch

work;Supply, wiring, testing and commissioning of Point Wiring for ( Light/ ceiling Fan/ exhaust fan & 6A socket) with 2 runs of 1.5 Sqmm + 1 run of 1.5 Sqmm FRLS PVC insulated 1100V grade multistrand Copper conductor wires, run in and including 20mm (1.40 -1.55)mm thickness ISI approved PVC conduits concealed in wall / ceiling or surface wiring (wiring should be conforming to IS 732 ) including all accessories such as junction boxes, conduit , bends,elbows and ceiling rose, with metal boxes, modular type switches , socket, Electronic fan regulators and the box covered with front plate, along with all necessary fixing accessories like mounting screws .clamps etc. Makes: For PVC Pipe: Precision/VIP / GoldMedal / Sudhakar /Polycab/. For Modualr Switches & Accessories & GI Modular box- Legrand (Arteor) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano For PCV Copper Wire-FRLSH- Finolex /RR kabel / HavellsKEI/Polycab or equivalent make as approved by the competent authority. Two light points controlled by 1No 6A Switch

work;Supply, wiring, testing and commissioning of Point Wiring for ( Light/ ceiling Fan/ exhaust fan & 6A socket) with 2 runs of 1.5 Sqmm + 1 run of 1.5 Sqmm FRLS PVC insulated 1100V grade multistrand Copper conductor wires, run in and including 20mm (1.40 -1.55)mm thickness ISI approved PVC conduits concealed in wall / ceiling or surface wiring (wiring should be conforming to IS 732 ) including all accessories such as junction boxes, conduit , bends,elbows and ceiling rose, with metal boxes, modular type switches , socket, Electronic fan regulators and the box covered with front plate, along with all necessary fixing accessories like mounting screws .clamps etc. Makes: For PVC Pipe: Precision/VIP / GoldMedal / Sudhakar /Polycab/. For Modualr Switches & Accessories & GI Modular box- Legrand (Arteor) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano For PCV Copper Wire-FRLSH- Finolex /RR kabel / HavellsKEI/Polycab or equivalent make as approved by the competent authority. One lights/Fan/Ex-fan controlled by 1No 6A Switch .

work;Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete as directed by Engineer In Charge. Makes:a) LUMINAIRE MAKE : WIPRO/BAJAJ/PHILIPS/CROMPTON/HAVELLS b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM or equivalent make as approved by the competent authority.

work;Supply and making one end termination of 3.5 core, 300 Sq.mm. AL ARcablewith heavy duty double compression brass gland as per BS 6121 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. Makes:Dowels/Comet/SMI or equivalent make as approved by the competent authority.

work;Supply and making one end termination of 3.5 core, 240 Sq.mm. AL ARcablewith heavy duty double compression brass gland as per BS 6121 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. Makes:Dowels/Comet/SMI or equivalent make as approved by the competent authority.

work;Supply and making one end termination of 4 core, 16 Sq.mm. AL ARcablewith heavy duty double compression brass gland as per BS 6121 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. Makes:Dowels/Comet/SMI or equivalent make as approved by the competent authority.

work;Supply and making one end termination of 4 core, 10 Sq.mm AL AR cablewith heavy duty single compression brass gland as per BS 6121 ,IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size Makes:Dowels/Comet/SMI or equivalent make as approved by the competent authority.

work;Supply and making one end termination of 4 core, 6 Sq.mm. Cu/AL AR cablewith heavy duty single compression brass gland as per BS 6121,IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size Makes:Dowels/Comet/SMI or equivalent make as approved by the competent authority.

work;Supply, Transportation, Laying, testing and commisisoning of 4 core, 6 Sq.mm. Cu AR cable XLPE/PVC insulated & PVC sheathed armoured cables of 1.1 KV grade with copper conductor as per IS 7098 Part-I etc complete in existing hume pipe/trench/cable tray with necessary fixing arrangments as required (as directed by departmental official) complete including labour charges. Make:Universal/Havells / KEI /Polycab/ RR Kabel or equivalent make as approved by the competent authority.

work;Supply, Transportation, Laying, testing and commisisoning of 3.5 core, 300 Sq.mm. AL XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)./1554-I in existing hume pipe/trench/cable tray with necessary fixing arrangments as required (as directed by departmental official) complete including labour charges. Make:Universal/Havells / KEI /Polycab/ RR Kabel or equivalent make as approved by the competent authority.

work;Supply, Transportation, Laying, testing and commisisoning of 3.5 core, 240 Sq.mm. AL XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)./1554-I in existing hume pipe/trench/cable tray with necessary fixing arrangments as required (as directed by departmental official) complete including labour charges. Make:Universal/Havells / KEI /Polycab/ RR Kabel or equivalent make as approved by the competent authority.

work;Supply, Transportation, Laying, testing and commisisoning of 4 core, 16 Sq.mm. AL XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)./1554-I in existing hume pipe/trench/cable tray with necessary fixing arrangments as required (as directed by departmental official) complete including labour charges. Make:Universal/Havells / KEI /Polycab/ RR Kabel or equivalent make as approved by the competent authority.

work;Supply, Transportation, Laying, testing and commisisoning of 4 core, 10 Sq.mm. AL XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)./1554-I in existing hume pipe/trench/cable tray with necessary fixing arrangments as required (as directed by departmental official) complete including labour charges. Make:Universal/Havells / KEI /Polycab/ RR Kabel or equivalent make as approved by the competent authority.

work;Supply, Transportation, Laying, testing and commisisoning of 4 core, 6 Sq.mm. AL XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)./1554-I in existing hume pipe/trench/cable tray with necessary fixing arrangments as required (as directed by departmental official) complete including labour charges. Make:Universal/Havells / KEI /Polycab/ RR Kabel or equivalent make as approved by the competent authority.

work;Supply,Transportation and laying of Outer dia 50mm and Inner dia 38mm double walled corrugated HDPE duct along with specials/ accessories made as per specification BSEN - 500 86/IS 14930 Part-II having corrugation on the outer wall and plain surface inner wall complete with necessary HDPE fittings for protection of 1.1 KV grade U.G cable (for electrical & ELV works). Makes:DURA LINE (Dura Guard) Precision/CPE or equivalent make as approved by the competent authority.

work;Supply, transportation & fixing of 60W LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's having System efficacy > 100 lm/W and junction temprature < 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, external Surge protection >10 KV with optics distribution , THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete for finished item of work including giving connections and labour charges etc. and as directed by Engineer In Charge. a) LUMINAIRE MAKE : WIPRO/BAJAJ/PHILIPS/CROMPTON/HAVELLS b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM or equivalent make as approved by the competent authority.

work;Erection charges for 7.50 M long Octagonal pole on bridge kerb portion with 4 Nos, 8" Anchor bolts with chemical treatment with suitable "J" type bolts etc duly drilling holes to RCC slab with V.C.C. M.15 concrete for suitable base concreting with necessary steel reinforcement work and curing for 7 days etc. including cost and conveyance of all material and all labour charges etc.complete as directed by the department officers.

work;Fabrication, Transportation and supply of 1 M length Double Arm Bracket made with MS galvanized 40mm / 50mm dia Pipe.Makes: Bajaj / Valmont /Transrail/Utkarsh or equivalent make as approved by the competent authority.

work;Fabrication, Transportation and supply of 1.0 M Length Single Arm Bracket made with MS galvanized 40mm / 50mm dia Pipe. Makes: Bajaj / Valmont /Transrail/Utkarsh or equivalent make as approved by the competent authority.

work;Fabrication, Transportation and supply of hot-dip galvanized Octogonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with HInged door opening arrangement, including the supply of suitable boards with bakelite sheet as per IS specification suitable to withstand the wind speed of 180 KMPH for 7.5 m height Pole having dimensions Bottom 130 mm,. Top 70mm with 3mm thick, base plate 220 x 220 x 12mm and 4 Nos of M20 x 700 long 'J' bolts along with template. Makes: Bajaj / Valmont /Transrail/Utkarsh or equivalent make as approved by the competent authority.

work;Supply, Transportation, Laying, testing and commisisoning of 3C x 6 Sqmm XLPE/PVC insulated & PVC sheathed armoured cables of 1.1 KV grade with copper conductor as per IS 7098 Part-I etc complete in existing hume pipe/trench/cable tray with necessary fixing arrangments as required (as directed by departmental official) complete including labour charges. Make:Universal/Havells / KEI /Polycab/ RR Kabel or equivalent make as approved by the competent authority.

work;Supply, Transportation, Laying, testing and commisisoning of 2C x 4 Sqmm XLPE/PVC insulated & PVC sheathed armoured cables of 1.1 KV grade with copper conductor as per IS 7098 Part-I etc complete in existing hume pipe/trench/cable tray with necessary fixing arrangments as required (as directed by departmental official) complete including labour charges.Make:Universal/Havells / KEI /Polycab/ RR Kabel or equivalent make as approved by the competent authority.

work;Supply, Transportation, Laying, testing and commisisoning of 4C x 2.5 Sqmm XLPE/PVC insulated & PVC sheathed unarmoured cables of 1.1 KV grade with copper conductor as per IS 7098 Part-I etc complete in existing hume pipe/trench/cable tray with necessary fixing arrangments as required (as directed by departmental official) complete including labour charges. Make:Universal/Havells / KEI /Polycab/ RR Kabel or equivalent make as approved by the competent authority.

work;Supply, Transportation, Laying, testing and commisisoning of 19C x 2.5 Sqmm XLPE/PVC insulated & PVC sheathed unarmoured control cables of 1.1 KV grade with copper conductor as per IS 7098 Part-I etc complete in existing hume pipe/trench/cable tray with necessary fixing arrangments as required (as directed by departmental official) complete including labour charges.Make:Universal/Havells / KEI /Polycab/ RR Kabel or equivalent make as approved by the competent authority.

work;Supply, Transportation, Laying, testing and commisisoning of 12C x 1.5 Sqmm XLPE/PVC insulated & PVC sheathed unarmoured control cables of 1.1 KV grade with copper conductor as per IS 7098 Part-I etc complete in existing hume pipe/trench/cable tray with necessary fixing arrangments as required (as directed by departmental official) complete including labour charges.Make:Universal/Havells / KEI /Polycab/ RR Kabel or equivalent make as approved by the competent authority.

work;Supply, Transportation, Laying, testing and commisisoning of 12C x 2.5 Sqmm XLPE/PVC insulated & PVC sheathed unarmoured control cables of 1.1 KV grade with copper conductor as per IS 7098 Part-I etc complete in existing hume pipe/trench/cable tray with necessary fixing arrangments as required (as directed by departmental official) complete including labour charges.Make:Universal/Havells / KEI /Polycab/ RR Kabel or equivalent make as approved by the competent authority.

work;Supply, Transportation, Laying, testing and commisisoning of 4C x 2.5 Sqmm XLPE/PVC insulated & PVC sheathed unarmoured control cables of 1.1 KV grade with copper conductor as per IS 7098 Part-I etc complete in existing hume pipe/trench/cable tray with necessary fixing arrangments as required (as directed by departmental official) complete including labour charges.Make:Universal/Havells / KEI /Polycab/ RR Kabel or equivalent make as approved by the competent authority.

work;Supply, Transportation, Laying, testing and commisisoning of 3C x 1.5 Sqmm XLPE/PVC insulated & PVC sheathed unarmoured control cables of 1.1 KV grade with copper conductor as per IS 7098 Part-I etc complete in existing hume pipe/trench/cable tray with necessary fixing arrangments as required (as directed by departmental official) complete including labour charges.Make:Universal/Havells / KEI /Polycab/ RR Kabel or equivalent make as approved by the competent authority.

work;Supply, Transportation, Laying, testing and commisisoning of 3C x 2.5 Sqmm XLPE/PVC insulated & PVC sheathed unarmoured control cables of 1.1 KV grade with copper conductor as per IS 7098 Part-I etc complete in existing hume pipe/trench/cable tray with necessary fixing arrangments as required (as directed by departmental official) complete including labour charges. Make:Universal/Havells / KEI /Polycab/ RR Kabel or equivalent make as approved by the competent authority.

work;Supply, Transportation, Laying, testing and commisisoning of 2C x 2.5 Sqmm XLPE/PVC insulated & PVC sheathed unarmoured control cables of 1.1 KV grade with copper conductor as per IS 7098 Part-I etc complete in existing hume pipe/trench/cable tray with necessary fixing arrangments as required (as directed by departmental official) complete including labour charges.Make: Universal/Havells / KEI /Polycab/ RR Kabel or equivalent make as approved by the competent authority.

work;Supply Installation Testing And commissioning of 625 kVA at 0.8 pf 415V 50Hz 3-Ø DG Set complete with 1500 RPM Diesel Engine of suitableBHP & AC Brush less SPDP Alternator mounted on a common base Frame & coupled through a flexible coupling or close coupled. Alternator: It shall be self regulated, self excited and confirms to IS: 13364/1992 or latest version with regulation of +5% from No load to full load, IP23, with standard Alternator Protection( Over voltage, over speed & under voltage). DieselEngine: Itshall have residential silencer, up to 10 M exhaust piping , electronic / Mechanical governor, Manual & electric Start, Batteries, Fuel tank & piping, control panel (16 G) with TP MCCB of required rating (25/36/50 KA) with PLC based Engine controller supplied by OEM, Ammeter, Voltmeter, Frequency Meter or Multi function meter, Energy Meter & Hour Meter, Engine instruments panel,AVM and Automatic Voltage Regulator. The diesel engine shall be capable of providing 10% over load for 1 Hr for every 11 Hrs of continuious running at full load.The DG set shall be supplied with initial filling of fuel,lube oil, coolant oil as per OEM specifications and shall be tested at site. Accoustic Enclosure: Weatherproof, powder coated Accoustic enclosure for DG set for sound attenuation fabricated from 1.6 mm CRCA sheet steel (structure) with side wall fabricated from 1.6 mm CRCA sheet and filled with foam as per CPCB norms latest amendments & IS 8183 .The doors are fabricated from 1.6 mm CRCA sheet packed with accoustic material, floor of MS chequrred plate 5.0 mmthick, All doors/ opening are sealed with neoprene/ EPDN gaskets. The DG Set shall be maintained for 2 years after commissioning by the supplier including regular servicing, cost of consumables etc complete as specified by the OEM along with warranty for two years. The enclosure has built in fuel tank, residential silencer (isolated from main DG chamber) with protection and tripping of DG set against temperature of more than 50 °C. All controls for operation of DG set are from outside the enclosure with DG control panel having processor based genset monitoring and control system MCCB/ACB Ammeter, voltmeter, Pf meter, frequency meter, KWH meter, Ind. Lamps etc. mounted inside enclosure , visible and accessible from outside. The enclosure should be suitable for following capacity DG sets and alternator.Noise level is less than 75 db (A) at a distance of 1 Mtrs as per CPCB-II norms. Note: OEM/ authorised dealers/ sevice partners shall have their own manufacturing plants in India with wide service area connectivity towards spares, service parts, consumables etc required during operation and maintenance and the contracting agecny/OEM shall provide Remote Monitoring of the Genset through App or Web based application for a period of 3 years from the date of commissioning & testing, handingover to client. Engine Makes:Caterpillar/Cummins/Greaves/Kirloskar or Equivalent as approved by the Competant authority. Alternator Make:Leroy somer/Crompton Greaves/Stamford/Kirloskar or equivalent as approved by the competent authority. Note: The OEM (or) Assembler shall have largest service network in AP/Telangana and preferably in Vijayawada (or) Hyderabad for the Genset with Toll Free: 24x7 Support and shall attend any service problem within the shortest time possible.

work;Supply and laying of 50mm x 6mm GI Earth Strip in horizontal /Vertical run in Ground/surface/Recess including, revitting,soldering,saddles,making connection etc as required of approved make or equivalent make as approved by the competent authority.

work;Supply and laying of 50mm x 6mm Copper Earth Strip in horizontal /Vertical run in Ground/surface/Recess including, revitting,soldering,saddles,making connection etc as required of approved make or equivalent make as approved by the competent authority.

work;Supply and laying of 8 SWG GI Earth wire in horizontal /Vertical run in Ground/surface/Recess including, revitting,soldering,saddles,making connection etc as required of approved make or equivalent make as approved by the competent authority.

work;Providing earthing as per IS 3043 with copper earth plate of size 600 x 600 x 3.15 mm by embodying 3 to 4 M below the ground level with 40mm dia 'B' Class G.I Pipe by exacavating a pit to a depth of 3 to 4 Mtr in all soils for Sophisticated Electronic equipment as per National Electric Code and earth connection from electrode Copper strip of 25mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to Copper strip including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powderincluding all accessories like nuts bolts reducer,nipple, wire meshed funnel andCCfinished chamber covered with hinged type with CI cover ,CI frame of size 600 X 600 mm ,testing earth resistance as required etc., complete of approved make or equivalent make as approved by the competent authority.

work;Providing earthling as per IS 3043 with perforated 3 M long 40 mm dia B class GI pipe including all accessories like nuts bolts reducer,nipple, wire meshed funnel and CC finished chamber covered with hinged type with CI cover ,CI frame of size 600 X 600 mm and embodying the pipe complete with alternate layers of salt and coke /charcoal/bentonite powder testing earth resistance as required etc., complete including all labour charges of approved make or equivalent make as approved by the competent authority.

work;Providing independent earthing for Important equipment with 100mm dia Heavy gauge C.I ( Cast iron ) pipe with Flange 2.5m long enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732 (Part II) of approved make or equivalent make as approved by the competent authority.

work;Supply,Transportation, Installation, testing & commissioning of copper wound Transformers 800 kVA, 33/0.433 KV, Three Phase, 50 Hz, DYN 11, ONAN type , Standard accessories, winding temperature rise of 45°C/40°C first fill oil, having permissible total loss values not exceeding 7.5%of the maximum total loss values for 33 KV as per energy efficiency level - 2 at basic Insulation level conforming to ISS 2026 (Part- I to Part - II), latest ammended and IS 1180 Part-I described as above with Cable box on HV side and Bus duct on LV Side , ON load Tap changer(OLTC) with RTCC etc., with initial filling of oil as per IS 335 complete and as per the following continuous rating complete as directed by Engineer In Charge for finished item of work. Make:ABB/ALSTOM/SEIMENS/Kirloskar or equivalent as approved by the competent authority.

work;Supply, Installation, Testing and Commissioning of 33 KV 800A Out door type -IP 66 VCB Panel with 1 Nos. VCBs suitable for 50Hz 3-phase system, suitable for 31.5kA/3sec short circuit withstand capacity & 31.5kA/1sec indoor type floor mounted metal clad, Switchgear Panel enclosure of sheet steel preferably Aluzinc, dust tight, vermin proof, totally enclosed cubicle floor mounting, free standing type with single break, horizontally drawout type breaker with trip free mechanism as per latest standard i.e. IS/IEC 62271200 as amended up to date and as per Technical specifications, IP4X for VCB Panel enclosure. Switchgear Panel shall be electrically & Mechanically interlocked as per IEC 62271-1, full voltage insulated copper Busbar with heat shrinkable sleeving, complete with suitable metering & protection devices, breaker featured with mechanical ON-OFF indicator with hand trip device and all accessories such as shunt trip coil, motorized & manually operated spring charging mechanism, emergency trip push buttons, auxiliary switch of 2NO + 2NC, interconnections, space heaters, panel earthing etc. and equipped with following switchgear and accessories including connection suitable for 3x185 to 3x 400 sqmm XLPE 33 kV cable (cable entry from bottom) to be connected through heat shrinkable jointing material etc as required.(Note - Cost of end termination not included in this item.) INCOMER/OUTGOINGS 1 No. each comprising the following 1 No. 800 Amp. VCB. 31.5KA 1 No. Integral Earth switch for line side earthing 3 No. dual core CTs 600-300-100A/1-1-1A of 7.5VA burden max and accuracy Class 0.5 for metering and class 5P10 for protection 3 No. Cast Resin 33000V/v3/110V/v3/110V/v3 PT Class 0.5/3P accuracy and 30VA burden max with and protection fuses / MCB. 1 No. Digital voltmeter with selector switch. 1 No. Digital Ammeter with selector switch. 1 No. Microprocessor based numerical relays with O/L, E/F and S/C protection with Integrated Arc sensing feature alongwith trip/lockout / antipumping / aux. relays. 1 No. HT Multi-function Bi-directional meter with import & export data consisitng of optical port with communication facility (RS 485/RS 232 port) -Secure make Premier 300. Set of MCBs for Panel AC/DC Set of MCBs for Main AC/DC Set of Indication lamps LED types , panel shall be desinged to operate on 24V/110V DC supply etc complete as directed by Engineer In Charge for finished item of work.Makes:ABB/Schneider/Seimens/Kirloskar/L&T or equivalent as approved by the competent authority. Note: The sizing of the panel & its design shall be submitted by contractor as per site conditions and the same shall be approved by the competent authority.

work;Supply and Making heat shrinkable type outdoor end terminations kit of size 3 core 300 sqmm cable size approved make suitable for XLPE insulated 33 KV cable, with required components, prepration of cable ends, testing etc, complete as directed by Engineer In Charge for finished item of work. Makes: Raychem /M seal/ Denson/ Multy/ Transeal-Hongshang or equivalent as approved by the competent authority.

work;Supply and Making heat shrinkable type indoor end terminations kit of size 3 core 300 sqmm cable size approved make suitable for XLPE insulated 33 KV cable, with required components, prepration of cable ends, testing etc, complete as directed by Engineer In Charge for finished item of work. Makes: Raychem /M seal/ Denson/ Multy/ Transeal-Hongshang or equivalent as approved by the competent authority.

work;Supply, Transportation, Laying, testing and commisisoning of 3core 300 sqmm XLPE insulated IS:7098/II H.T.cable for working voltage 33 K.V.Earthed with Stranded impacted Circular Aluminium Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanised flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable etc complete with necessary fixing arrangments as required including cost and conveyance of materials and labour charges etc., complete as directed by Engineer In Charge for finished item of work. Makes: Universal/Havells / KEI /Polycab/ RR Kabelor equivalent as approved by the competent authority.

work;Supply, Delivery and Fixing of white color 3 layer pvc tanks along with all accessories etc., all complete as specified and as directed by Engineer-in-charge

work;Supply, Delivery and Fixing of 250 Ltr Capacity stainless fully steel body Water Coolers including transportation, material including fixing charges etc complete as specified and as directed by Engineer-in-charge

work;Supply and Delivery of 2000 Ltr/Hr Reverse Osmosis Water purifier plant of semi automatic model including installation and transportation charges,labour charges and material charges etc complete for finished item of work as specified and as directed by Engineer-in-charge

work;Providing and fixing removable raised/false access flooring (300 mm Finished Floor Height (FFH)) with system and its components of approved make with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and as directed by Engineer-in-charge consisting of: (a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and 25 mm outer diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer diameter with two GI Check nuts screwed on the stud for level adjustment upto 50mm, locking and stabilizing the pedestal head in position at the required level. (b) Stringers system in all steel construction hot dipped galvanized of rectangular size 570x20x30x0.80mm thick having holes at both ends for securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions (c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of 800H grade (FS800H). The panel should be Corroresist epoxy coated for lifetime rust protection and cavity formed by the top and bottom plate is filled with Pyrogrip noncombustible Portland cementitious core mixed with lightweight foaming compound. The access floor shall be factory finished with Anti-static High Pressure laminate with Non Warp technology upto 1mm thickness for superior adhesion and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg.

work;Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings SS door handle 200mm, SS patch Lock etc all complete as per direction of Engineer-in-charge.

work;Aluminum openable window for toilet shaft: Designing, Providing and fixing aluminium semi- unitised window glazing 3 barrier system with provision for IG unit insulated double glass unit of approved make having main frame of verticals and horizontals as shown in the elevation drawing made out of specially design exturded aluminium sections withstand wind pressure as per codes and fabricated fixed at all levels, elevation and heights to the masonary /RC walls with necessary clamps, brackets and anchor fasteners. All clamps and brackets shall be mild steel hot dip galvanized minimum 100 microns thick and shall conform to IS;4759. The extruded aluminium section shall be anodised as per the approved clour with a anodic coating of minimum 20 microns and PUDF coated to minimum 40 microns. Extruded section shall be of 6063T6 alloy conforming to ASTM b221. Any other fastening straps, nuts, bolts, rivets,washers etc; shall be in stainless steel SS304 grade for interior use and SS316 for the exterior. All tapes shall be open cell of norton/equivalnt make. All necessary anchor fasterners shall be of HILTI or Fisher make or approved equivalent and of SS304 grade for cracked concrete. The BOQ specification shall be read in conjuction with technical specification and architectural facade drawings. Rate of all flashings covering the pheriphery of the glazing terminations, floor levels,columns closour, expanshion joints etc. if any shall be included in the system cost. No extra cost will be paid for flashing seperately. complete for finished item of work for all floors and as directed and approved by Engineer-in-charge.

work;MODULAR ALUMINIUM SKIRTING - 75 mm HIGH Screw type Providing and fixing of matt natural anodized skirting profile of 75 mm height inclusive of all accessories and installation as per the manufacturers specifications. Rate should include preparation of surface. The skirting shall be fixed as per details & Architects instructions. Rate should include wall chipping, plastering. Skirting shall have Ply backing with Screw type.

work;Supply and installation of Imported heavy fabric curtain with required tracks including stitching, providing prills, Rods fitting etc., complete including material, transportation and labour charges etc complete for finished item of work as per the approval of interior Architect. Approved make: New Castle/Approved Equivalent by competant authority.

work;SPECIALISED HIGH STRENGTH CELLULOSE FIBRE REINFORCED ACRYLIC ELASTOMERIC LIQUID MEMBRANE COATING FOR TERRACE : a). Providing and application of one coat of High Solid, Cold applied Acrylic Elastomeric Liquid Membrane Coating with ? RAINSEAL (Armstrong )/ POWER n COAT EWC (EBT) / DECKGUARD E 2000 (Fosroc) /ZORICOAT EWC (PMCC) / SIKAGARD 550 W / WATERSHIELD EWC 600 diluting with water at 1 : 0.50 ratio as a primer coat at a consumption of 200ml per Sqm. b). Providing and laying of Non woven polyster reinforced fibre mesh of 40 GSM, with 1 Mtr width and 50mm overlap on the primed surface. c) Providing and application of one coat of High strength cellulose fibre reinforced Acrylic Elastomeric Liquid Membrane coating with -RAINSEAL CFR (Armstrong / ZORICOAT CF (PMCC) / POWER n COAT CR (EBT) WATERSHIELD FLEX CR / FIBRE REINFORCED ACRYLIC ELASTOMERIC COATINGS (Fosroc ) diluting with water at 20% as a base coat application at a consumption of 400ml per Sqm. (or) any equivalent coating as approved by the competant authority

work;Supply & installation of Kiln seasoned solid yellow colour woodflame ( without thresold) of section100 x 55mm with Architecture of 40X10mm on one side with PU polish, supply & installation of 40mm thick flush shutter of solid wood intill core with veneer PU polished on both sides including labour charges, all necessary hardware, accessories as per drawing and approved by the Engineer in Charge etc ,complete for finished item of work.

work;Fire Rated Door: Supply & Fixing of Powder Coated Fire Rated doors, frames & shutters made of Skin pass galvanized Iron sheet conforming to Base Steel as per IS 513 ?D? Quality, Galvanized as per IS 277 with Hot Zinc Coating of 120 grams / Sq.Mtr with powder coating of thickness 60-65 Microns, frame with 1.2mm thick Skin pass Galvanized Iron sheet formed to double rebate profile of ize 143 mm X 58 mm with maximum bending radius of 1.4 mm and filled with in-fill Polyurethane foam, the Door Shutters are with 0.80 mm thick Skin pass Galvanized Iron Sheet formed to provide a 46 mm thick fully flush, double skin door shell with Lock Seam joints at stile edges, fitted with in-fill of Honeycomb Kraft Paper and coated with polyester powders of Pure polyester/ epoxy polyester or polyurethane powder for powder coating of thickness 60 ? 65 microns and are coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability, the Shutter provided with 6 MM clear float vision glass in Circular, Square or Rectangular shapes, Stainless Steel Ball Bearing Butt Hinges 3 mm thick fixed flush to the frame and shutter (Profile 102x76x3mm thick).Mortise Sash Lock with Lever Handles, Mortise Dead Bolt, etc for 120 minutes Fire Rated door conforming to IS:3614 (Part2) 1992 complete for finished item of work at all floor levels and as directed and approved by Engineer-in-charge.

work;S.S Railing: Supplying and fixing of stainless steel ( grade 304 ) hand railing as per approved drawing each step fixed with base plate using bonding agent and anchor fastner and welding, drilling of holes with pneumatic compressor for fixing railing, buffing, polishing all members of the railing thouroughly, lacquer finishing to present seamless finish including cost and conveyance of all materials, electrodes, welding charges, cost of all consumables, labour charges , overheads & contractors profit etc., complete for finished item of work at all floor levels and as directed by the Engineer-in-Charge. Note: The design & pattern of railing shall be furnished by the contractor along with weight calculator and shall be approved by the competant authority

work;3rd Floor: Ground Floor: Providing Clading with glazed full body porcelain wall tiles of size 600 x 600 mm thickness 6-8mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:3) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand, water, tiles, coloured cement etc., to site, excluding cost of seigniorage charges on all materials, but including all labour charges for mixing of cement mortar, laying glazed tiles to level, curing, overheads and contractor's profit etc., complete for finished item of work.

work;2nd Floor: Ground Floor: Providing Clading with glazed full body porcelain wall tiles of size 600 x 600 mm thickness 6-8mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:3) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand, water, tiles, coloured cement etc., to site, excluding cost of seigniorage charges on all materials, but including all labour charges for mixing of cement mortar, laying glazed tiles to level, curing, overheads and contractor's profit etc., complete for finished item of work.

work;1st Floor: Ground Floor: Providing Clading with glazed full body porcelain wall tiles of size 600 x 600 mm thickness 6-8mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:3) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand, water, tiles, coloured cement etc., to site, excluding cost of seigniorage charges on all materials, but including all labour charges for mixing of cement mortar, laying glazed tiles to level, curing, overheads and contractor's profit etc., complete for finished item of work.

work;Ground Floor: Providing Clading with glazed full body porcelain wall tiles of size 600 x 600 mm thickness 6-8mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:3) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand, water, tiles, coloured cement etc., to site, excluding cost of seigniorage charges on all materials, but including all labour charges for mixing of cement mortar, laying glazed tiles to level, curing, overheads and contractor's profit etc., complete for finished item of work.

work;Providing Clading/Skirting with mirror finish Granite 16 to 18 mm thick up to 8'-00 (2.43 M) other than black and regular colours set over base coat of CM (1:3) 12mm thick with Grey cement slurry of honey like consistency spread at the rate of 3.3 Kgs of cement per Sq.m and jointed with cement to full depth (joints of stone should be flushed)including cost and conveyance of all materials like cement, sand, water, etc., to site, cost of base coat including cost of all labour charges like dressing to the required size, mixing of mortar, curing and lift charges including cutting the brick wall to place the stones and redoing the surface smooth complete for finished item of work for all floor levels and as directed and approved by the Engineer-in-Charge.

work;Third Floor: Flooring with 16 to 18mm thick high polished granite stone slabs other than black and regular colours with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges and all other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item of work and as directed and approved by the Engineer-in-Charge

work;Second Floor: Flooring with 16 to 18mm thick high polished granite stone slabs other than black and regular colours with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges and all other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item of work and as directed and approved by the Engineer-in-Charge

work;First Floor: Flooring with 16 to 18mm thick high polished granite stone slabs other than black and regular colours with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges and all other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item of work and as directed and approved by the Engineer-in-Charge

work;Ground Floor: Flooring with 16 to 18mm thick high polished granite stone slabs other than black and regular colours with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges and all other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item of work and as directed and approved by the Engineer-in-Charge

work;Supplying, Laying & Jointing of R.C.C.Socket and Spigot pipess of NP2 class 300mm dia conforming to IS standards, including all lead & lift, Lowering the RCC S/S pipes carefully into the trenches laying them true to alignment and gradient and jointing with rubber rings including cost and conveyance of all materials to site, labour charges, overheads & contractors profit etc., complete for finished item of work and as directed & approved by Engineer-in-charge.

work;Plastering with 12mm thick in CM (1:4) finished smooth including cost and conveyance of all materials to site, finishing, curing, scaffolding and all operational, incidental, labour charges etc., including cutting grooves where ever necessary etc., complete for finished item of work. (As per SS903).

work;Masorny work in CM (1:6) prop with Flyash cement/ lime solid blocks with compressive strength of 75 kg/sq.cm -IS:12894-CLASS-7.5- 290x225x140 mm or equivalent size including cost and conveyance of all materials, labour charges , scafolding and curing etc., complete for walls for superstructure

work;Providing and fixing of saucer drains of 300mm wide and 60-75 mm thick with necessary cutting in subbase and providing PCC 1:2:4, 75 mm thk at bottom, PCC on rear side for supporting, including necessary excavation and finishing the joints with CM 1:6 and curing with water after application,all works including labour, material and scaffolding complete.

work;Providing and fixing of 0.3 x 0.3 x 0.15m thick precast cement concrete kerb stones of Grade M25 with necessary cutting in subbase and providing PCC 1:2:4, 75 mm thk at bottom, PCC on rear side for supporting, including necessary excavation and finishing the joints with CM 1:6 and pointed with CM 1:2, with water proof cement paint on external surfaces - Providing and applying two coats of water proof cement paint of Snowcem India Ltd. over a coat of white wash, with brush to get an even and uniform shade and thickness and curing with water after application,all works including labour, material and scaffolding complete.

work;Constuction and laying of precast concrete blocks for paving of M-30 grade and thickness not less than 50 mm for Non-traffic areas conforming to IS 15658 in all shapes and designs by mechanical/manual means to the pattern directed by the Engineer and compacting with Plate Compactors of suitable size and capacity, filling the gaps in between two paving blocks using joint filling sand with the grading requirements confirming to IRC:SP:63 Clause 6.5.2 and compacting with suitable size and capacity of roller as per IRC:SP:63 Clause 8.8.3.

work;Constuction and laying of 80mm thick paver block of grade M40 by mechanical/manual means to the pattern directed by the Engineer and compacting with Plate Compactors of suitable size and capacity, filling the gaps in between two paving blocks using joint filling sand with the grading requirements confirming to IRC:SP:63-2004 Clause 6.5.2 and compacting with suitable size and capacity of roller as per IRC:SP:63 Clause 8.8.3. Vehicular

work;Providing, Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem specification including cost of all materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in base courses on well prepared surface and compacting with Vibratory roller to acheive the desired density (98% of maximum dry density) etc., as directed by the Engineer-in-Charge and as per MoRT&H specification 406 (5th revision) for finished item of work.

work;Construction of Granular sub-base by providing HBG material confirming to Grading - V of MoRT&H Table 400-1 & 400-2 including cost and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavator / approved means at OMC and compacting with vibratory roller to achieve the desired density (98% of maximum dry density) etc., complete for finished item of work as per MoRT&H Specification 401 (5th revision) and as directed by the Engineer-in-charge. Vehicular & Pathway

work;Providing Roofing with 0.5mm thick prepainted galvanized G.I. trapezoidal profile sheets fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3mm Butyl tape. The sheets are provided with anti capillary grove excluding the cost of purlins, rafters, trusses but including cost and conveyance of all materials and labour for fixing etc., complete for finished item of work and as directed and approved by Engineer-in-charge.

work;Fabrication, Supply and fixing of Structural Members comprising of specified MS Sections including painting with best enamel paint over a primary coat of red oxide, including cost and conveyance of all materials, all fabrication charges, fixing chages and incidental charges etc. complete for finished item of work as per drawings, as directed by the Engineer in Charge.

work;Supply and erecting fencing of section having size 2450 mm in height from ground level and 1200mm width by using angle iron size 50x50x6mm. The section of the frame shall be fitted with flat iron supports of size 25x6mm on top, bottom and middle and Hot dipped Galvanised Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721 with latest amendaments 2½"x2½" (63 mm x 63 mm)- 8 Gauge to the angle iron at every distance of 30 cms by iron studs complete duly painted with one coat of red oxide and two coats of aluminium paint including cost and conveyance of all materials and labour for fixing etc., complete for finished item of work and as directed and approved by Engineer-in-charge.

work;Providing High Yield Strength Deformed (HYSD/) Thermo Mechanically Treated (TMT) Mild Steel (MS) steel bars Fe- 500D grade as per IS 1786 of different diameters for RCC works, including labour charges for staightening ,cutting,bending to required size and shape s, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG ,forming grills for reinforcement work as per approved designs and drawings,including cost and conveyance of steel bars, including all wastages such as overlaps couplings, chairs, spacer bars including cost and conveyance of binding wire ,cover blocks and all incidental, operational, labour charges such as cutting ,bending,placing in postion, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.(Apssno.126).

work;Walls - 200mm thick: Supply and placing of the RCC M-30 Grade Design Mix Concrete corresponding to IS 456 using Batching Plant with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. (BLD-CSTN-2-14).

work;Columns: Supply and placing of the RCC M-30 Grade Design Mix Concrete corresponding to IS 456 using Batching Plant with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. (BLD-CSTN-2-14).

work;Footings/ Pile Caps: Supply and placing of the RCC M-30 Grade Design Mix Concrete corresponding to IS 456 using Batching Plant with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. (BLD-CSTN-2-14).

work;Plain Cement Concrete (1:3:6) M 10 nominal mix using 20mm size machine crushed hard granite metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc. to site, sales & other taxes on all materials, all charges for mixing, laying concrete in position, vibrating, curing, centering charges, overheads & contractors profit etc.,excluding cost of steel & its fabrication Charges for finished item of work and as directed by the Engineer-in-Charge .

work;Supply and Filling of Local Earth/Sand for foundation trenches including cost and conveyance off all materials and all labour charges ramming,watering etc, as per drawing and technical specification as per MORTH including overheads & contractors profit complete for finished item of work and as directed by the Engineer-in-Charge

work;Supply and Filling of Sand for foundation trenches including cost and conveyance off all materials and all labour charges ramming,watering etc, as per drawing and technical specification as per MORTH including overheads & contractors profit complete for finished item of work and as directed by the Engineer-in-Charge

work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH including cost of all labour charges and overheads & contractors profit complete for finished item of work and as directed by the Engineer-in-Charge.