Amaravati Development Corporation Limited Tender
... More
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Amaravati Development Corporation Limited - ADCL Tender
Bridge Construction
Civil And Construction
Road Construction
Drainage Work
Pipe Line Project
Civil And Architectural Services
Water Storage And Supply
Furnitures and Fixtures
Opening Date15 Feb 2025
Closing Date3 Mar 2025
Tender Amount₹ 1,80,94,58,853
Costs
EMD
₹ 1,80,94,589Document Cost
Refer DocumentsTender Fee
₹ 20,000
Summary
Construction Of Balance Smart Trunk Infrastructure With Roads, Storm Water Drains,
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
786099Tender No
340/ADCL/IPD/2024-25Tender Authority
Amaravati Development Corporation Limited ViewPurchaser Address
-Website
http://http://ccdmc.co.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Filling of Median / Island with excavated material deposited at site from roadway cutting and excavation for drain and foundation of other structures, spread, graded and compacted with Plate compactor as per drawing, Technical Specifications Clause 408 (5th Revision) with all leads and lifts complete for finished item of work and as directed by the Engineer in Charge
5820.42
381
2220257.41
... More
Filling of Median / Island with approved material obtained from selected borrow source as per drawing, Technical Specifications Clause 408 (5th Revision) with selected borrowed useful earth from outside road boundary by mechanical means up to SDR with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soil on the embankment, spreading soil, breaking clods, sectioning and compacting to meet requirements including all hire and operational charges of T&P, etc, complete for finished item of work and as directed by the Engineer in Charge
5820.42
2016
11734374.15
... More
Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm by mechanical means in areas of non thorny jungle(light jungle), removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 of MORTH (5th Revision) including Contractors profit and Overhead charges for finished items of work and as directed by Engineers-in-charge
19.6
37875
742366.46
... More
Construction of Granular sub-base by providing HBG material confirming to Grading - VI of MoRT&H Table 400-1 including cost and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavator / approved means at OMC and compacting with vibratory roller to achieve the desired density etc., complete for finished item of work as per MoRT&H Specification 401 (5th revision) and as directed by the Engineer-in-charge.
41198.22
2244
92480116.33
... More
Providing, Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem specification including cost of all materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in base courses on well prepared surface and compacting with Vibratory roller to acheive the desired density etc., as directed by the Engineer-in-Charge and as per MoRT&H specification 406 (5th revision) for finished item of work.
36113
3019
109035980.9
... More
Providing and applying prime coat with bitumen emulsion (SS-1) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.85 kg/sqm using mechanical means for finished item of work as per MoRT&H Specification 502 (5th Revision).
161464.8
77
12497375.52
... More
Providing and applying tack coat with bitumen Emulsion (RS-1) (Bulk) using Emulsion pressure distributor at the rate of 2.5 kg to 3.0 kg / 10 sqm over granular surface treated with primer cleaned with mechanical broom for finished item of work as per MoRT&H Specification 503 (5th revision) and as directed by the Engineer-in-Charge.
24304
16
401745.12
... More
Providing and applying tack coat with bitumen Emulsion (RS-1) (Bulk) using Emulsion pressure distributor at the rate of 2.0 to 3.0 kg /10 sqm over bituminous surface cleaned with mechanical broom for finished item of work as per MoRT&H Specification 503 (5th revision) and as directed by the Engineer-in-Charge.
258720
15
3963590.4
... More
Providing and laying of Dense Graded Bituminous Macadam with 100-120 TPH Batch type HMP Producing an average output of 75 tonne per hour using crushed aggregates of Grading - II as per table 500-10 of MoRT&H Specification 505 (5th revision) premixed with bitumen binder VG 40 grade @ 4.50% of weight of total mixture, transported to site, laid over a previously prepared surface with Hydrostatic paver finisher with sensor to the required grade, level and alignment and rolled with smooth wheeled, vibratory and tandem rollers as per Clauses 501.6 and 501.7 to achieve the desired compaction for finished item of work as directed by the Engineer-in-Charge including hire and operational charges all T&P and all other contingent charges necessary including cost of of all materials etc., complete as per MoRT&H specification No. 505 (5th revision)
14876.4
10028
149184109.54
... More
Providing Bituminous Concrete with 100-120 TPH Batch type hot mix plant producing an average output of 75 tonne per hour using HBG crushed aggregates of Grading-I as per table 500-17 of specification 507 of MoRT&H (5th Revision), premixed with bitumen binder VG-40 Grade @ 5.2 % of mix and filler, transporting the hot mix to work site, laying with Hydroststic paver finisher with sensor to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H Specification 507 (5th Revision) complete for finished item of work in all respects as directed by Engineer-in-Charge
6468
11185
72349107.6
... More
Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm Type-A aggregates using VG-30 grade bitumen @ 22 kg/10 sqm and colour pigment to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a Smooth wheeled roller 8-10 tonne capacity, and finishing to required level and grade as per MoRT&H Specification 508 (5th Revision) complete for finished item of work in all respects as directed by Engineer-in-Charge
23520
195
4603804.8
... More
Providing and constructing inlet chambers of 0.6mx0.6mx0.6m dimensions with RCC M25 grade of concrete for Raft and walls and M15 grade of concrete for Levelling Course, with galvanised gratings and PVC/HDPE pipe 150mm dia as per drawing and Technical Specifications Section 1500, 1600 & 1700 (5th Revision) and as directed by the Engineer in Charge.
524
11585
6070974.92
... More
Construction of Median chutes of clear size 0.25m width x 0.275m depth with 100mm Raft & walls as per fig 4.32 of IRC SP 42-2014 and Technical Specifications Section 1500, 1700 & 2100 (5th Revision) and as directed by the Engineer in Charge.
524
1879
984858
... More
Providing and Laying Plain Cement Concrete M 20 kerb with top and bottom width 115 and 165mm respectively, 390mm high over WMM kerb stone laid with kerb laying machine as per drawing including cost, conveyance of all materials to site and labour charges etc complete as per Technical Specifications Clauses 409 and Section 1700 (5th Revision) and as directed by the Engineer in Charge.minimum quantity of 344 kg cement to be used per cum of concrete. -Grade M 20 for Kerb "A" Type Section over WMM
31360
295
9268134.4
... More
Providing and Laying Plain Cement Concrete M 20 kerb with top and bottom width 115 and 465mm respectively, 365mm over WMM kerb stone laid with kerb laying machine as per drawing including cost, conveyance of all materials to site and labour charges etc complete as per Technical Specifications Clauses 409 and Section 1700 (5th Revision) and as directed by the Engineer in Charge.minimum quantity of 344 kg cement to be used per cum of concrete. -Grade M 20 for Kerb "L" Type Section over WMM
7840
485
3808985.6
... More
Providing and Laying kerb painting with with two coats on the surface with synthetic enamel paint grade-I (IS:164) in all shades on new plastered concrete surfaces after back filling including cost, conveyance of all materials to site and labour charges etc complete as per drawing, Technical Specifications Clause 803 (5th Revision) and as directed by the Engineer in Charge
16268
131
2136639.12
... More
Construction of footpath/separator by providing 60mm paver blocks-M35 grade, 30mm sand fill below it including cost, conveyance of all materials to site and labour charges etc complete as per the technical specification of MoRTH& APDSS as per drawings and as directed by the Engineer -in- Charge
23520
757
17805816
... More
Supplying of hot applied thermoplastic road marking compound, 2.50mm thick including reflectorising glass beads @ 250gms with Reflectorising Glass beads on Bituminous surface at 250gms per Sqm area, thickness of 2.50mm is exclusive of surface applied glass bead as per MoRTH section 803.40 & IRC 35 -2015 , the material should be satisfy MoRTH specifications 803.40 and must comply with the following a) White index for the product should be in the range of 60-70 when measured against standard reference. The applied panel 7/8 number must be submitted for checking up the white index in the department lab .In case the department approves the white index box of any vendor, the department engineer may carryout random checking of the appplied products at site against the approved panel. In case of any major deviation, beyond acceptance limit, department reserve the right to cancel or reject the total supplied consignment of the said material and will compell the vendor has to replace the full consignment by the desired material as per approved panel at his own cost and additional demurrages may be claimed due to loss of man days (as per the rules of the department), b)The Luminance factor of the material should be in the range of 80-85% at 45 degrees centigrade as per AASTHOM 249. c) Crack resistance: The applied panel cured for 7 days under ambient condition and then should be tested as per BS3262 part-1, 1989 and should pass at the range of 0 degree centigrade to '-10 ' degree centigrade. D) Adhesion : Strong E) Softening point 102 degree centigrade F) Dried film finish : Smooth and uniform G) Night Vision: High as directed by the Engineer-in-Charge and confirming to IS 164-1961 (1st revision reaffirmed in 1986) and clause conforming to IRC 35-2015 & MoRTH section 803.4-Lane / Center line / Edge marking / Transverse marking and any other marking
4704
560
2634240
... More
Providing and fixing Village name board size 600x800 mm made out of Type – XI of ASTMD 4956-09 wide angle cube cornered micro Prismatic Retro reflective sheeting and confirming to IRC 67:2012 for full background of Green Colour & White Letters and fixed over 3MM Alluminium Composite Material sheet having minimum 0.30mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back support frame of M.S angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 m from the ground level to the bottom of the board. The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of height. The signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials ,equipment, machinery and labour with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by Engineer –in-Charge.
2
8236
16472
... More
Providing and fixing Cautionary / Warning sign boards size 900 mm equilateral triangle made out of Type – XI of ASTMD 4956-09 wide angle cube cornered micro Prismatic Retro reflective sheeting and confirming to IRC 67:2012 for full background of White colour and letters/logos done by screen printing in Black colour, boarders by screen printing in Red colour and fixed over 4MM Aluminium Composite Material sheet having minimum 0.5 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back support frame of M.S angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 m from the ground level to the bottom of the board. The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of height. The signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials ,equipment, machinery and labour with all leads and lift, loading chages necessary for satisfactory completion of the work as directed by Engineer -in-Charge.
2
6958
13916
... More
Providing and fixing Mandatory / Regulatory sign boards size 900 mm circle made out of Type – XI of ASTMD 4956-09 wide angle cube cornered micro Prismatic Retro reflective sheeting and confirming to IRC 67:2012 for full background of White colour and letters/logos done by screen printing in Black colour, boarders by screen printing in Red colour and fixed over 4MM Aluminium Composite Material sheet having minimum 0.5 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back support frame of M.S angle 25x25x3mm all roundand fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 m from the ground levelto the bottom of the board. The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of height. The Signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials ,equipment, machinery and labour with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by Engineer -in-Charge.
2
10231
20462
... More
Supplying and installation of delineators (Roadway indicators) not less than 800mm high above ground level. The delineator shall have a core and shell construction which shall be made of tough, high impact resistant, injection-molded, thermoplastic outer body. The inner core shall consist of powder coated or painted Mild steel of minimum thickness 1.0mm. The delineator should have top retro-reflective unit consisting of white color micro prismatic non metallic retro-reflective sheeting of minimum exposed area of 125 cm2 and bottom retro-reflective unit consisting of red color micro prismatic non metallic retro-reflective sheeting of minimum exposed area of 35 cm2 confirming to ASTM D4956 type XI standards and as per IRC -79. The delineators shall be fixed to the ground by inserting the root of the delineator up to the marked portion and by firm concrete filling as per the instructions by engineer in-charge.
13
2048
26624
... More
Providing and fixing of Moulded Shanks Raised Pavement Markers made of Polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lense face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 TypeH and complying to specifications of Category A of MORTH circular No.RW/NH-33023/10/97 - DO III dt. 11-o6-1997. The height, width and length shall not exceed 50mm, 100mm and with minimum reflecting area of 13 sqcm on each side and the slope to the base shall be 35 +/- 5 degrees The strength of detachment of the integrated cylindrical shanks (of diameter not less than 19 +/- 2mm and height not less than 30 +/- 2mm) from the body is to be a minimum values of 700kgs. Fixing will be by drilling holes on the road for the twin shanks to go inside without nails and using epoxy resign based adhesive as per manufacturers recommendation and complete as directed bythe Engineer.
5232
336
1757952
... More
Clearing the light Jungle like Shrub, bushes, grass, wild vegetation and it including all operational, incidental, labour charges, required tools, overheads & contractors profit complete for finished item of work
36388
3
115713.84
... More
Aliliment and fixing planting point with 0.45 mtr length sticks incl mateal cost, transport and overheads and contractor propit complte for finised work
12471
1
22697.22
... More
Earth work excavation for foundations Digging of pits for plant in ordinary soils 0.90x0.90x0.90 mtr
12471
155
1933005
... More
Filling with Red soil (Red soil in this context it is defirn:;g as sandy
As per loamy garden soil congenial for plant growth which shall be of light textured, crystalline, porous and friable;·fertile, slightly acidic·:or neutral)in pits/trenches and including cost and conveyance of red s /1' to work
site and it including all operational, incidental ,labour charges, required tools, overheads & contractors profit complete for finished item of work.
12471
427
5331352.5
... More
Cost and Conveyance of Farm Yard Manure or dry cow dung powder including loading, unloading, internal transport and application. of the FYM into the pits/trenches and it including all operational, incidental,labour charges, required tools, overheads & contractors propit complete for finished item of work. (0.028 cum mtr farm yard Manure for each. pit'.) Rs.1761 for cubic
12471
49
611827.26
... More
Conveyance charges for internal transprot upto 100 mt with head load and application of the red soil and FYM into the pit and it including all operational, incidental ,labour charges, required tools, overheads & contractors profit complete for finished item of work. (0.37 cubic per pit and Rs. 50.02 per pit
12471
48
602474.01
... More
Transport of 21''x21'' size bag plants from Nursery to Plantation site including loading and unloading 10 km lead
12471
31
391090.56
... More
Internal transportation of larger bag size 21''x21'' for 100 no. of plants
12471
16
208265.7
... More
Planting of bag plants 21''x21'' size @ 5145.61/100 no.
12471
51
641757.66
... More
0.60 mtr.inner side Dia , 1.5'' wall thickness, 11" hight ,RCC Cement ring
11027
250
2756750
... More
Bed preparation for Korean/Mexican: Dressing the surface to the desired shape, laying of 150 mm. (6") thick fine red garden soil, covered with a thin layer of 10 mm thick sand, watering, rolling (compacting to 4" thickness by hand roller), including the cost of red garden soil, sand and labour charges etc., for complete bed preparation and laying and ramming of lawn mats I rolls in proper position on existing prepared bed by internal transportation from dumped place, including cost of labour
for laying, ramming by hand roller/ demesha, internal transportation and watering etc., and it including all operational, incidental, labour charges,required tools, overheads & contractors profit complete for finished item of work. excluding cost of grass, fertilizers and chemicals etc., for I Sqm (Red garden soil in this context it is defined as sandy loamy garden soil congenial for plant growth which shall be of light textured, crystalline,
porous and friable, fertile, slightly acidic or neutral)
29374.83
379
11142166.01
... More
Filling with carted gravel in pathways,.trenches, sides of foundations and
basement with initial lead in layers not exceeding 15cm thick, watering Asper and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P1 etc., and
overheads & contractors profit complete for finished item ofwork(APSS NO.309&3 I0) Preparation of mounts for lawn
5458.2
433
2366075.12
... More
Preparation of mounds of various size·and shape by available excavated/
supplied earth, and breaking clods, watering , dressing etc., as direction Asper of Officer-in-charge. and including labbur charges, T&P etc., excluding cost of red soil and overheads & contractors profit complete for:finished item of work Preparation of mounts for lawn
5458.2
191
1043498.68
... More
Provision for Transportation of 21" x 21" bag size (30 kg/bag) 12471 Nos
374.13
1000
374130
... More
Provision for Transportation of Lawn (30 kg/sqm) 29375 Nos
881.25
1000
881250
... More
Provision for Transportation of 600mm RCC Ring bag size (50 kg/sqm) 11027 Nos
551.35
1000
551350
... More
Cost of Lagerstromia Indica (21"x21") / Equivalent Plant.
11027
340
3749180
... More
Cost of (Bahunia Blackaena ) (21"x21") / Equivalent Plants
361
430
155230
... More
Cost of (Ficus Relisiosa ) (21"x21") / Equivalent Plants
361
375
135375
... More
Cost of (Tabebuia avellanedae ) (21"x21") / Equivalent Plants
361
450
162450
... More
Cost of ( Spathodea campanulata ) (21"x21") /Equivalent Plants
361
375
135375
... More
Cost of Lawn Korean Carpet
29375
200
5875000
... More
Maintenance of Palms/Tree planting: Trimming (once in month) and application of fertilizers, insecticides, Fungicides @ 20 gms/pit/sqmt) (once in quarterly) by manually excluding cost of fertilizers, it including all operational, incidental ,labour charges, for complete of work. (Once in 3 months i.e 4 times in a Year 12471 Nos x 4 = 49884 Nos)
49884
6
344199.6
... More
Maintenance of hedge/shrub planting: Trimming of hedges/shrubs (once in 30 days) and application of fertilizers, insecticides, Fungicides (once in a month @ 20 gms/pit/sqmt) etc., by manually excluding cost of fertilizers it including all operational, incidental, labour charges, for complete of work. (Once in 3 months i.e 4 times in a Year 29374.828 Sqm x 4 = 117499 Sqm )
117499
6
748468.63
... More
Hire charges of tractor mounted water tanker for filling sump by 5000 ltrscapacity tanker(150 waterings for oneyear ie. once in a three days @ 5litres per sqm/plantper each time)and it including·all operational, incidental,labourcharges,requiredtools,overheads&contractors profit complete for finished item of work
7329
691
5065731.51
... More
watch and ward 6 member per month for 12 months = 72 member
60
15000
900000
... More
Supply and delivery of 19:19:19 fertilizer 4 times each time 20 gms / Sqm (Once in 3 months i.e 4 times in a Year ( 12471 Nos x 4 x 20 gms)/1000/50 = 20 Bags &
(Once in 3 months i.e 4 times in a Year ( 36388 Sqm x 4 x 20 gms)/1000/50 = 58 Bags
78
1800
140400
... More
Foundation and erection charges with special T&P, for 10Mtrs long Octagonal / Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.60Mtr x 0.60Mtrs x 1.40 Mtr size M20 cc work vibrated concreting mixing with necessary steel (15kgs) reinforcement and curing for 7 days as directed by the field engineers during execution including excavation of Earth/BT all labour charges and cost and conveyance of materials etc., complete.
262
8908
2334040.1
... More
Foundation and erection charges with special T&P, for 4 Mtrs long pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.45Mtr x 0.45Mtrs x1.20 Mtr size M20 cc work vibrated concreting mixing with necessary steel (10kgs) reinforcement and curing for 7 days as directed by the field engineers during execution including excavation of Earth/BT all labour charges and cost
and conveyance of materials etc., complete.
524
6613
3465489.72
... More
Fabrication, Transportation and supply of hot-dip galvanized Octagonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with hinged door opening arrangement, including the supply of suitable boards with bakelite sheet as per IS specification suitable to withstand the wind speed of 180 KMPH for 10 Mtrs height Pole having dimensions Bottom 175 mm,. Top 70mm with 3mm thick, base plate 275 x 275 x16mm and 4 Nos of M24 x 750 long 'J' bolts along with template including Fabrication, Transportation and supply of 1.5 Mtr length double arm suitable size decorative galvanized bracket with PU paint colour finish etc complete. (The design should be approved from field Engineers) for finished item of work as directed by Engineer in charge. Make for Pole :Bajaj /Valmont /Laasma/ Transrail/Utkarsh/Skipper/Consoul /Surya/Vakrangee/Lysaght Pole
262
37162
9736530.46
... More
Supply, Transporation, installation, testing and commissioning of LED decorative post top of 45W with a system lumen output of 4950 lumens and a minimum system efficiancy of 110lm/W with street light optics. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. the luminaire should have a color temperature of 5700K and CRI70. The luminare shall meet IP66 with THD10% and PF0.9, IK08 protection. The luminaire shall hav eclosed diffused optics with polycarbonate diffuser board. the total power consumption should not exceed 45W (including driver) with glass reinforced polymer (GRP) composite type Conical pole of height 4 mtr including decorative base plate and internal junction box including labour charges etc., complete and as directed by the departmental authorities. Makes:Klite/Phillips/Reytek/lightman or equivalent. Design, model shall be as approved by the departmental authorities
302
39600
11959200
... More
Supply, transportation and fixing of LED Street light Luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass/polycarbonate diffuser, supply input voltage 120 - 270V AC, P.F 0.90, high power LEDs having System Efficacy = 120 lumens/watt and junction temperature 70°C, with Ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5/Sec-3), driver surge protection 4KV, in-house additional Surge protection 10 KV with optics distribution, THD10% at 110 Volts AC, driver efficiency 90%, CCT: 3000K - 5700K, minimum CRI70, etc., complete with earth connection and not less than two years warranty. a) Luminaire Make : Wipro(Skyline) / Philips (Greenline Extra) / GE- Venture / Crompton(Nexus / Hawk series) / Bajaj (Edge) / Halonix (Modular/ Lumos-Super) / Havells (Endura Series)/Greenlites(HI-Lux) /Capart(Premium)/Polycab/Keselec / HPL(City Vision)/Jaquar (Premium) /Eveready /Surya (Pollux) / Fortune Arrt (Leaf) / Rhino(GPSL06) b) LED MAKE :PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG. - 210W LED Fixture
262
17868
4681531.28
... More
Supply, transportation and fixing of LED Street light Luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass/polycarbonate diffuser, supply input voltage 120 - 270V AC, P.F 0.90, high power LEDs having System Efficacy = 120 lumens/watt and junction temperature 70°C, with Ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5/Sec-3), driver surge protection 4KV, in-house additional Surge protection 10 KV with optics distribution, THD10% at 110 Volts AC, driver efficiency 90%, CCT: 3000K - 5700K, minimum CRI70, etc., complete with earth connection and not less than two years warranty. a) Luminaire Make : Wipro(Skyline) / Philips (Greenline Extra) / GE- Venture / Crompton(Nexus / Hawk series) / Bajaj (Edge) / Halonix (Modular/ Lumos-Super) / Havells (Endura Series)/Greenlites(HI-Lux) /Capart(Premium)/Polycab/Keselec / HPL(City Vision)/Jaquar (Premium) /Eveready /Surya (Pollux) / Fortune Arrt (Leaf) / Rhino(GPSL06) b) LED MAKE :PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG. - 120W LED Fixture
262
10782
2824954.74
... More
Supply and fixing of 6-32A 10KA SP MCB, C/D Curve ISI in Octagonal pole with Din channel, with or without insulator terminal strip connector including cost & conveyance of all materials and labour charges etc., complete Makes: Legrand-DX3 / Schneider-A9/Hager-h3/ Siemens-5SX4/ Havells STADx /L&T-AU/Indo Asian-Opti pro/ HPL (Techno)/Anchor (Uno plus).
1048
339
355418.72
... More
Design, Fabrication, assembling, packaging, forwarding to site, installation, testing & commissioning of Outdor type panel with stand enclsoure consisting of 3Ph, , 415V, 50Hz, 3 nos of 200A fuse units, 9 no of 100A fuse units, RYB Indicators for incoming and outgoing phases Al. bus bar, floor mounting free standing totally enclosed compartmentalized front operational, vertical, dust and vermin proof, FRB Shrouding. LT panels fabricated with 2 mm thick for load bearing members, side sheet, removable top & bottom sheets, equipment mounting plate, front door & covers, partition and 3mm HRCA for undrilled gasket removable gland plate and base frame is ISMC -75.The panel shall be painted with texture finish electro static paint SIEMENS GREY RAL -7032 (powder coating).
4
39118
156474.4
... More
Supply installation, testing and commisision of 21Kva Three Phase Smart Streetlight CCMS Web Controller –Wireless Street light monitoring and controlling system with 63A MCB for incoming and 9 Nos of 20Amps SP MCB with 2 outputs with 1 no of buffer SP MCB of 3 Nos, includes inbuilt RF gateway. It uses GSM/GPRS/4G technology to receive commands and send data from and to the web software with 4G with 2G fall back, Micro HDMI port to be provided. MIPI CSI Camera port to be provided. Minimum of Two USB 3.0 ports to be provided. In-built GPS to be provided It should support GPS/GLONASS/BD, Switching Components, Automatic MCB Trip Rectification for nuisance MCB trips, Controller should have SPD of 20kV/10kA for the Panel. Metering: ISI Energy Meter with Class 1.0 accuracy and Complaint to IS:13779. Ability to communicate securely via cellular networks (GSM / GPRS /2G /3G /4G). Ability to send data regarding energy usage, ON/OFF status etc. from controller. Ability to remotely upgrade the CCMS device firmware from central server. Design Life should be More than 10 years. Inbuild Battery backed with RTC based timer for Bypass operation for up to 8 Hours. Enclosure: CRCA Metal Enclosure with IP65 and IK10 with size of 700x500x145mm CRCA 1.2 thickness with Single Door RAL 7035 Powder coating. Test report: Controller should be type- tested with NABL lab and the test report need to be submitted.Communication Charges per panel per annum included for the warranty period of 2 years,including CCMS Software charges, and Supply of Stand for 3 Phase panel, 6.2 feet height, MS powder coated with 5mm Thick and approved byengineer in charge
8
46300
370400
... More
Supply and laying of 3 core 2.5 Sqmm ISI marked, PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990..Makes: Finolex / RR kabel / Havells/ Finecab /KEI/Polycab/ Gloster/ Goldmedal/GM// Fortune Arrt/Anchor /Million
9049.55
171
1552269.31
... More
Supply transportation and laying of 16 Sqmm 4 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / Finecab / KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt
8888
259
2303325.2
... More
Supply transportation and laying of 10 Sqmm 4 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / Finecab / KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt
9936
225
2236295.52
... More
Supply transportation and laying of 35 Sqmm 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / Finecab / KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt
800
377
301848
... More
Supply transportation and laying of 50 Sqmm 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / Finecab / KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt
80
489
39183.2
... More
Supply and Transportation and laying of Outer dia 63 mm and Inner dia 51mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Makes:DURA LINE (Dura Guard) or its equivalent make and as directed by the Engineer in Charge
19624
174
3433611.28
... More
Earth work excavation of Trench of size in all types of soils for covering of UG cables/HDPE pipe and refilling of Trench.
3532.32
395
1396608.68
... More
Providing independent earthing by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters.
12
4763
57166.08
... More
Supply and making end termination with heavy Alluminium lugs (pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape etc of up to 16 sqmm.Makes:Dowels/Jainson/Comet.
8384
13
114273.92
... More
Supply and making end termination with heavy Alluminium lugs (pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape etc of 35 sqmmMakes:Dowels/Jainson/Comet
96
27
2617.92
... More
Supply and making end termination with heavy Alluminium lugs (pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape etc of 50 sqmmMakes:Dowels/Jainson/Comet
32
35
1127.04
... More
Supply and laying of 8 SWG GI wire(0.104Kgs/1Mtr) Earth wire/Strip in horizontal run in Ground including,revitting,soldering,saddles,making connection etc as required
19624
11
222928.64
... More
Supply and laying of 25mm x 6mm GI Flat (1.18Kgs/1Mtr) Earth Strip in horizontal run in Ground including, revitting,soldering,saddles,making connection etc as required
24
110
2645.04
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH 0-3m
54022.33
133
7226567.08
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH 3-6m Including Dewatering
14734.87
160
2358315.94
... More
Earthwork excavation by mechanical means for foundations of structures as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing sides of bottom, back filling the excavation earth to the extent required etc., complete including charges for finished item of work as per MoRT&H specification 304 (5th Revision) and as directed by the Engineer-in-Charge 6m (Including Dewatering)
394.24
197
77933.36
... More
Vibrated cement concrete M 15 Grade Concrete as levelling coarse using 40mm , 20mm and 10mm size HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed and compacted by vibration including curing for 14 days including cost, and conveyance of all materials to site and all labour charges ,centering, machine mixing, laying in position, Compacting , Vibrating and curing including all other incidental and all other operational charges of T&P required etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MoRTH .Minimum quantity of 275 kg cement to be used per cum of concrete.
1885.54
5374
10133137.08
... More
Vibrated reinforced cement concrete M 30 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution and excluding cost of steel and its fabrication charges for finished item per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH and as directed by the Engineer-in-Chargei) Drain Raft concrete M-30 grade including form work. Minimum quantity of 407 kg cement to be used per cum of concrete.
4130.68
5667
23409183.16
... More
Vibrated reinforced cement concrete M 30 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution and excluding cost of steel and its fabrication charges for finished item per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH and as directed by the Engineer-in-Chargeii) Drain Side Walls concrete M-30 grade excluding formwork. Minimum quantity of 407 kg cement to be used per cum of concrete.
7255.32
5477
39737387.64
... More
Vibrated reinforced cement concrete M 30 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution and excluding cost of steel and its fabrication charges for finished item per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH and as directed by the Engineer-in-Chargeiii) Drain Slab concrete M-30 grade including formwork. Minimum quantity of 407 kg cement to be used per cum of concrete.
3742.75
6020
22532477.83
... More
Form work for Drain side walls including cost & conveyance of all materials to site and labour charges, other incidental hire and operational charges of all T&P etc., complete as per approved drawings etc., complete and as directed by Engineer-in-charge
46336.03
568
26322571.92
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., complete and as directed by the Engineer in Charge.
1256.33
91446
114886390.87
... More
Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia PVC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing face. Complete as per drawing and technical specification Clauses 614, 709, 1204.3.7 MORD / 2706 & 2200 MORTH.
4369.54
236
1031779.48
... More
Supply and Laying of a geotextile 200 gsm between pitching and embankment slopes on which pitching is laid to prevent escape of the embankment material through the voids of the stone pitching/cement concrete blocks as well as to allow free movement of water without creating any uplift head on the pitching as per Tech Specifications in Section 700 & 2504 MORTH.
1044
189
197514.36
... More
Supply & Fixing of 20mm thick Compressible Fiber board joint filler in expansion joint complete as per drawing, Technical Specifications Section 2604 (5th Revision) and as directed by the Engineer in Charge
1981.5
696
1380035.49
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) and as per latest revisions and specifications and as directed by the Engineer - in - charge.
23263.3
481
11190810.47
... More
Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery of manhole covers and frames of H.D.-20 with 500mm dia. Clear opening with ISI marking anywhere in A.P., F.O.R. destination including, loading, unloading & stacking etc., as applicable.
410
2259
926518
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete
61547.87
115
7086006.27
... More
Manufacture as per company’s standard specification supply and delivery of encapsulated plastic steps for man holes anywhere in A.P. including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work etc, complete
6720
188
1267392
... More
Providing and laying boulder apron for bed protection with stone boulders of minimum size and weight as per Table 1300.1, no fragment weighing less than 25 / 40 kg laid dry complete as per drawing and technical specifications Clause 1301 MORD / 2503 MORTH
228.71
2305
527270.32
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHa) 0.0 m To 3.0 m Depth
13405.48
133
1793251.06
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
8323.46
481
4004000.43
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete and as directed by Engineer-in-charge
8738.42
115
1006054.29
... More
Vibrated reinforced cement concrete M 20 grade with batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed and compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MoRTH (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 347 kgs)Note : The rate shall be adjusted as per the approved design mix by the competent authority For Pipe Encasement
145.78
5206
759041.47
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) /(Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, complete and as directed by the Engineer in Charge.
5.83
91446
533130.35
... More
Laying and Providing End caps for DI & MS crossing pipes using Socket Flanges and Blank Flange joints .Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) (ex-works) Excluding Transportation etc., complete and as directed by Engineer-in-chargeFor DI pipe crossings (500mm)
2350
169
399077
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc to complete as directed by Engineer incharge.150mm Dia DI K7 Pipes
1835
2000
3671633.15
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc to complete as directed by Engineer incharge.600mm Dia DI K7 Pipes
663
13240
8778736.59
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc to complete as directed by Engineer incharge.800mm Dia DI K9 Pipes
1192
25078
29893977.28
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc to complete as directed by Engineer incharge.600mm Dia DI K9 Pipes
1532
15176
23249969.04
... More
Supply & Delivery of Centrifugal Cast (spun) Ductile Iron fittings conforming to IS: 9523/2000 having dimensions as per BIS, with zinc coating externally and inside mortar lining (with finishing as per clause 13/IS9523/2000) including transportation to site of work , ((Reference to specifications. BIS No.3114/94) etc complete Upto 500mm Dia
836
154
128760.72
... More
Supply & Delivery of Centrifugal Cast (spun) Ductile Iron fittings conforming to IS: 9523/2000 having dimensions as per BIS, with zinc coating externally and inside mortar lining (with finishing as per clause 13/IS9523/2000) including transportation to site of work , ((Reference to specifications. BIS No.3114/94) etc complete Above 500mm Dia
5907
169
1003126.74
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc to complete as directed by engineer incharge150mm Dia DI Pipes
1835
108
198858.95
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc to complete as directed by engineer incharge600mm Dia DI Pipes
2195
793
1741688.6
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc to complete as directed by engineer incharge800mm Dia DI Pipes
1192
1281
1527250
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc to complete as directed by engineer incharge150mm Dia DI Pipes
334
217
72691.76
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc to complete as directed by engineer incharge600mm Dia DI Pipes
399
559
223252.47
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc to complete as directed by engineer incharge800mm Dia DI Pipes
217
1117
242597.32
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking. 150mm Dia DI Pipes
334
115
38707.26
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking. 600mm Dia DI Pipes
399
686
273805.77
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking. 800mm Dia DI Pipes
217
1289
279828.01
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking. ii) 11.25º to 45º Bend600mm Dia DI Pipes
30
686
20586.9
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking. ii) 11.25º to 45º Bend800mm Dia DI Pipes
10
1289
12895.3
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking. iii) 45º to 90º Bend150mm Dia DI Pipes
2
115
231.78
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking. iii) 45º to 90º Bend200mm Dia DI Pipes
2
139
279.5
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking. iii) 45º to 90º Bend600mm Dia DI Pipes
2
686
1372.46
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking. For Pipe Network800 X 800 X 800mm Dia DI Pipes
6
1289
7737.18
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking. For Scour Valves150 X 150 X 150mm Dia DI Pipes
3
115
347.67
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking. For Scour Valves200 X 200 X 200mm Dia DI Pipes
3
139
419.25
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking. For Scour Valves600 X 600 X 150mm Dia DI Pipes
3
686
2058.69
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking. For Scour Valves800 X 800 X 200mm Dia DI Pipes
3
1289
3868.59
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking. 200 X 200 X 150mm Dia DI Pipes
54
139
7546.5
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with flanged Ends confirming to IS: 8329/2000 in Standard Working lengths of 1.0m with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation .For Air Valves200mm Dia DI K9 Pipe
36
9579
344877.84
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with flanged Ends confirming to IS: 8329/2000 in Standard Working lengths of 1.0m with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation .For Scour Valves (3No of 1m length)150mm Dia DI K9 Pipe
3
7186
21558.54
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with flanged Ends confirming to IS: 8329/2000 in Standard Working lengths of 1.0m with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation .For Scour Valves (3No of 1m length)200mm Dia DI K9 Pipe
3
9579
28739.82
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with flanged Ends confirming to IS: 8329/2000 in Standard Working lengths of 1.0m with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation .For Scour Valves (3No of 1m length)150mm Dia DI K9 Pipe
3
7186
21558.54
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with flanged Ends confirming to IS: 8329/2000 in Standard Working lengths of 1.0m with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation .For Scour Valves (3No of 1m length)200mm Dia DI K9 Pipe
3
9579
28739.82
... More
Supply and delivery of DI D/F Gate Valves (Soft Seated) PN-16 Resilient seated soft sealing gate valves with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vaccum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538/ISO inclusive of VAT (sales tax), transportation to work site, loading, unloading (reference to specifications BIS No.3114/1994) for finished item of work . 150mm Dia Scour Valve
1
24337
24337.53
... More
Supply and delivery of DI D/F Gate Valves (Soft Seated) PN-16 Resilient seated soft sealing gate valves with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vaccum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538/ISO inclusive of VAT (sales tax), transportation to work site, loading, unloading (reference to specifications BIS No.3114/1994) for finished item of work . 200mm Dia Scour Valve
1
35758
35758.9
... More
Supply and delivery of DI D/F Gate Valves (Soft Seated) PN-16 Resilient seated soft sealing gate valves with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vaccum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538/ISO inclusive of VAT (sales tax), transportation to work site, loading, unloading (reference to specifications BIS No.3114/1994) for finished item of work . 150mm Dia Scour Valve
1
24337
24337.53
... More
Supply and delivery of DI D/F Gate Valves (Soft Seated) PN-16 Resilient seated soft sealing gate valves with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vaccum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538/ISO inclusive of VAT (sales tax), transportation to work site, loading, unloading (reference to specifications BIS No.3114/1994) for finished item of work . 200mm Dia Scour Valve
1
35758
35758.9
... More
Lowering, keeping in position and fixing DI Gate valves excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces 150mm Dia Scour Valve
1
244
244.39
... More
Lowering, keeping in position and fixing DI Gate valves excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces 200mm Dia Scour Valve
1
403
403.19
... More
Lowering, keeping in position and fixing DI Gate valves excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces 150mm Dia Scour Valve
1
244
244.39
... More
Lowering, keeping in position and fixing DI Gate valves excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces 200mm Dia Scour Valve
1
403
403.19
... More
Jointing DI gate valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994.)150mm Dia Scour Valve
1
579
579.14
... More
Jointing DI gate valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994.)200mm Dia Scour Valve
1
627
627.71
... More
Jointing DI gate valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994.)150mm Dia Scour Valve
1
579
579.14
... More
Jointing DI gate valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994.)200mm Dia Scour Valve
1
627
627.71
... More
Design, Supply, Erection and Commissioning of Air Management System having Efficient Air Release , Isolation Wafer Type Butterfly Valve, Tamperproof Enclosure System with Vandalized Alert and Burst Monitoring by pressure monitoring at Air Valve locations. The System will also capable of operating as flush valve in the event of requirement of drawing the water for fire incidents etc.200mm Dia Air Valve
18
260000
4680000
... More
Supply, delivery, laying and jointing of Smooth Wall 40mm outer dia and 33mm inner dia Permanently Lubricated HDPE Telecom Duct with Silicore inner layer and 4mm PP Rope in 500mts Coil format confirming to TEC GR.No.TEC/GR/TX/CDS-008-03, March-2011 with Amdt. No.1, dt:25/28.03.2013 etc., complete and as directed by Engineer-in-charge
2724
55
149820
... More
Supply of Accessories like 40mm Push Fit Couplers, 40mm End Plugs & 40mm Simple Plugs for Smooth Wall 40mm outer dia and 33mm inner dia Permanently Lubricated HDPE Telecom Duct etc., complete and as directed by Engineer-in-charge
18
140
2520
... More
Vibrated reinforced cement concrete M 25 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 403 kgs)Note : The rate shall be adjusted as per the approved design mix by the competent authority For Valve Chambersa) Raft
11.29
5663
63938.88
... More
Vibrated reinforced cement concrete M 25 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 403 kgs)Note : The rate shall be adjusted as per the approved design mix by the competent authority For Valve Chambersb) Walls 150mm thick
14.58
13034
190043.74
... More
Vibrated reinforced cement concrete M 25 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 403 kgs)Note : The rate shall be adjusted as per the approved design mix by the competent authority For Valve Chambersc) Slab
4.21
6001
25267.75
... More
Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery and Fixing of Heavy Duty manhole covers and frames - 24x24 HD 20 with ISI marking anywhere in A.P., F.O.R. destination including, loading, unloading & stacking at site etc., complete
18
2147
38651.76
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm hard granite machine crushed metal mechanically mixed , compacted by vibration including curing for 14 days including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawings and technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MORTH and directed by the departmental officers for PCC Bedding of Pipe Encasing, Valve Chambers & Thrustblocks
35.99
5220
187894.43
... More
Vibrated reinforced cement concrete M 25 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 403 kgs)Note : The rate shall be adjusted as per the approved design mix by the competent authority For Thrustblocks
136.46
5663
772816.65
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) /(Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, complete and as directed by the Engineer in Charge. for Valve Chambers & Thrustblocks
4.47
91446
408763.75
... More
Providing fitting and fixing mild Flat size (0.15x0.01) and bar including fabrication & one coat of primer etc complete as per drawing and technical specifications Clause 1208.2MORD / 1900 & 2703 MORTH and as directed by Engineer-in-charge
603.05
1334
804752.13
... More
Manufacturing, Supply, Delivery of Double chambered restrained joint DI K9 Pipes confirming to IS 8329 (restrained joints are designed and tested as per ISO 10804) (to be used to for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985 /8329-2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specials150mm Dia
11
2733
30069.38
... More
Manufacturing, Supply, Delivery of Double chambered restrained joint DI K9 Pipes confirming to IS 8329 (restrained joints are designed and tested as per ISO 10804) (to be used to for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985 /8329-2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specials600mm Dia
11
16582
182403.21
... More
Manufacturing, Supply, Delivery of Double chambered restrained joint DI K9 Pipes confirming to IS 8329 (restrained joints are designed and tested as per ISO 10804) (to be used to for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985 /8329-2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specials800mm Dia
11
24406
268474.47
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994)150mm Dia
11
108
1192.07
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994)600mm Dia
11
793
8728.28
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994)800mm Dia
11
1281
14093.75
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.)150mm Dia
2
217
435.28
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.)600mm Dia
2
559
1119.06
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.)800mm Dia
2
1117
2235.92
... More
Manufacture, Supplying and fitting Ductile Iron Double Chambered Restrained Joint fittings confirming to IS 9523 : 2000 (restrained joints are designed and tested as per ISO 10804) of Class K-12 (Alternative and to avoid concrete thrust blocks along with minimum length of Restrained joint DI pipes at bends) including rubber gasket confirming to IS 5382 : 1985 and locking bars & rubber gaskets etc complete Ductile Iron Double Chambered Restrained Joint
fittings upto 500mm dia
100
366
36698
... More
Manufacture, Supplying and fitting Ductile Iron Double Chambered Restrained Joint fittings confirming to IS 9523 : 2000 (restrained joints are designed and tested as per ISO 10804) of Class K-12 (Alternative and to avoid concrete thrust blocks along with minimum length of Restrained joint DI pipes at bends) including rubber gasket confirming to IS 5382 : 1985 and locking bars & rubber gaskets etc complete Ductile Iron Double Chambered Restrained Joint
fittings above 500mm dia
500
415
207915
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHa) 0.0 m To 3.0 m Depth
7543.6
133
1009107.37
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
8283.64
481
3984845.02
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete and as directed by Engineer-in-charge
5657.7
115
651371
... More
Vibrated reinforced cement concrete M 20 grade with batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed and compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MoRTH (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 347 kgs)Note : The rate shall be adjusted as per the approved design mix by the competent authority For Pipe Encasement
74.8
5206
389465.65
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) /(Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, complete and as directed by the Engineer in Charge.
2.99
91446
273423.63
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc to complete as directed by Engineer incharge.100mm Dia DI K7 Pipes
443
1377
610055.3
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc to complete as directed by Engineer incharge.150mm Dia DI K7 Pipes
1570
2000
3141397.3
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc to complete as directed by Engineer incharge.200mm Dia DI K7 Pipes
1608
2650
4262148.72
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc to complete as directed by Engineer incharge.250mm Dia DI K7 Pipes
868
3521
3056340.84
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc to complete as directed by Engineer incharge.300mm Dia DI K7 Pipes
602
4542
2734362.26
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc to complete as directed by Engineer incharge.350mm Dia DI K7 Pipes
532
5783
3076790.08
... More
Supply & Delivery of Centrifugal Cast (spun) Ductile Iron fittings conforming to IS: 9523/2000 having dimensions as per BIS, with zinc coating externally and inside mortar lining (with finishing as per clause 13/IS9523/2000) including transportation to site of work , ((Reference to specifications. BIS No.3114/94) etc complete. Upto 500mm Dia
1247
154
192062.94
... More
Supply & Delivery of Centrifugal Cast (spun) Ductile Iron fittings conforming to IS: 9523/2000 having dimensions as per BIS, with zinc coating externally and inside mortar lining (with finishing as per clause 13/IS9523/2000) including transportation to site of work , ((Reference to specifications. BIS No.3114/94) etc complete. Above 500mm Dia
4912
169
834155.84
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc to complete as directed by engineer inchargeFor Pipes100mm Dia
443
66
29472.79
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc to complete as directed by engineer inchargeFor Pipes150mm Dia
1570
108
170140.9
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc to complete as directed by engineer inchargeFor Pipes200mm Dia
1608
157
253340.4
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc to complete as directed by engineer inchargeFor Pipes250mm Dia
868
212
184762.48
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc to complete as directed by engineer incharge300mm Dia
602
275
165736.62
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc to complete as directed by engineer inchargeFor Pipes350mm Dia
532
345
183704.92
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc to complete as directed by engineer inchargeFor Pipe Network 100mm Dia DI Pipes
81
179
14551.65
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc to complete as directed by engineer incharge150mm Dia DI Pipes
285
217
62027.4
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc to complete as directed by engineer inchargeFor Pipe Network 200mm Dia DI Pipes
292
236
69046.32
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc to complete as directed by engineer inchargeFor Pipe Network 250mm Dia DI Pipes
158
266
42107
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc to complete as directed by engineer incharge 300mm Dia DI Pipes
109
303
33048.8
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc to complete as directed by engineer inchargeFor Pipe Network 350mm Dia DI Pipes
97
359
34887.02
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For Pipe Network 100mm Dia
81
79
6441.93
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For Pipe Network 150mm Dia
285
115
33028.65
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For Pipe Network 200mm Dia
292
139
40807
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For Pipe Network 250mm Dia
158
156
24772.82
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.300mm Dia
109
238
26006.31
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For Pipe Network 350mm Dia
97
302
29315.34
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking. i) 0º to 11.25º Bend 800mm Dia DI Pipes
10
1289
12895.3
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking. ii) 11.25º to 45º Bend800mm Dia DI Pipes
12
1289
15474.36
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking. iii) 45º to 90º Bend800mm Dia DI Pipes
6
1289
7737.18
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking. For Pipe Network100 X 100 X 80mm Dia
66
79
5248.98
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking. For Pipe Network100 X 100 X 100mm Dia
33
79
2624.49
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking. For Pipe Network150 X 150 X 80mm Dia
12
115
1390.68
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking. For Pipe Network150 X 150 X 150mm Dia
5
115
579.45
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking. For Pipe Network200 X 200 X 80mm Dia
10
139
1397.5
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking. For Pipe Network200 X 200 X 100mm Dia
3
139
419.25
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking. For Pipe Network200 X 200 X 150mm Dia
2
139
279.5
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking. For Reducers100 X 80mm Dia
1
79
79.53
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking. For Reducers200 X 100mm Dia
2
139
279.5
... More
Manufacture, supply, & delivery of HDPE pipes grade PE 100 (10 kg/sqcm) conforming to IS 4984 - 1995 including transportation to any where in A.P. Outer Dia50mm Dia HDPE Pipes
9954
115
1153569.06
... More
Manufacture, supply, & delivery of HDPE pipes grade PE 100 (10 kg/sqcm) conforming to IS 4984 - 1995 including transportation to any where in A.P. Outer Dia75mm Dia HDPE Pipes
7
269
1884.89
... More
Laying and jointing of HDPE pipes by butt fusion welding as per IS:7634-Part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure. 50mm Dia HDPE Pipes
9954
26
263880.54
... More
Laying and jointing of HDPE pipes by butt fusion welding as per IS:7634-Part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure. 75mm Dia HDPE Pipes
7
27
195.37
... More
Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to anywhere in AP.a) Pipe Ends Long Neck75mm Dia
49
146
7181.44
... More
Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to anywhere in AP.a) HDPE Tees75mm Dia
8
261
2090.48
... More
Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to anywhere in AP.d) HDPE Bends75mm Dia
81
246
19969.74
... More
Service connection using 1 No.of Composite Clamp Saddle for tapping from DI distribution mains shall be of wrap around design, wide skirt and wide straps support, which shall reinforce the pipe while providing excellent stability to the saddle. Non corrosive plastic body moulded with stainless steel threaded metal insert for tapping outlet and underneath projection to self interlock with DI/HDPE main pipe. Threading size and dimensions shall conform to IS: 554. The body shall have retaining cavity housing for internal and external retention of the elastomeric seal. Straps shall be made Engineering plastic SS 304, NC Rolled thread, tightening torque for 1/2" (M12) nut bolt 14-15Kg.m and for 5/8"(M16) nut bolt 21-23Kg.m (DI Main Pipe Sizes from 100mm to 250mm with Outlet Sizes of 1/2", 3/4",1" Outlets),1 No. of Regulating Brass Ferrule.(1/2",3/4",1"),2 No. of compression adaptor with one side compression end to suit ½” /3/4”/1” (20mm/25mm/32mm OD )PE80 Blue pipe and other side with female threaded off-take with SS-304 material inserts of sizes ½” /3/4”/1” BSP threads, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin) and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16.Double Compression elbow to suit 20mm/25mm/32mm OD PE80 Blue pipe, Body, Nut and cap of polypropylene, clip ring of POM (Acetylic resin) and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16. PE80 Blue pipe of 4 meter length as per ISO4427 Rev1. for conveyance of potable water. the pressure rating 1/2" (20mm OD) will be PN16. Certificate for compliance of testing these fittings and pipe as per BS-6920 by designated Laboratories to be produced. inclusive of Transportation, installation cost, civil works such as earthwork excavation, refilling etc complete as directed by Engineer-incharge
330
1900
627000
... More
Supply, lowering and jointing of MDPE Blue Pipe 40mm as per ISO 4427 Rev 1. For conveyance of potable water .The pressure rating of 40mm will be 4kg/cm. Certificate for compliance of testing these fittings and pipe as per BS-6920 by designated laboratories to be produced etc., complete and as directed by Engineer-in-charge
1.2
95
114
... More
Manufacture, supply, delivery, Laying & Jointing of 16mm PE flexible pipes including transportation etc., complete and as directed by Engineer-in-charge
29643
8
254929.8
... More
Manufacture, supply, delivery, Laying of 16mm Start Connector/takeoff including transportation etc., complete and as directed by Engineer-in-charge
662
-
463.4
... More
Manufacture, supply, delivery, Laying of 16mm End Cap including transportation etc., complete and as directed by Engineer-in-charge
662
-
463.4
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm hard granite machine crushed metal mechanically mixed , compacted by vibration including curing for 14 days including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawings and technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MORTH and directed by the departmental officersPCC for Thrust blocks & Valve Chambers
25.77
5220
134538.47
... More
Vibrated reinforced cement concrete M 25 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 403 kgs)Note : The rate shall be adjusted as per the approved design mix by the competent authority For Thrust Block
38.29
5663
216848.52
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) /(Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, complete and as directed by the Engineer in Charge.For Thrust Block & Valve Chambers
0.27
91446
24690.43
... More
Manufacturing, Supply, Delivery of Double chambered restrained joint DI K9 Pipes confirming to IS 8329 (restrained joints are designed and tested as per ISO 10804) (to be used to for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985 /8329-2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specials100mm Dia
11
1967
21645.91
... More
Manufacturing, Supply, Delivery of Double chambered restrained joint DI K9 Pipes confirming to IS 8329 (restrained joints are designed and tested as per ISO 10804) (to be used to for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985 /8329-2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specials 150mm Dia
11
2733
30069.38
... More
Manufacturing, Supply, Delivery of Double chambered restrained joint DI K9 Pipes confirming to IS 8329 (restrained joints are designed and tested as per ISO 10804) (to be used to for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985 /8329-2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specials .200mm Dia
11
3600
39605.06
... More
Manufacturing, Supply, Delivery of Double chambered restrained joint DI K9 Pipes confirming to IS 8329 (restrained joints are designed and tested as per ISO 10804) (to be used to for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985 /8329-2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specials 250mm Dia
11
4707
51777.77
... More
Manufacturing, Supply, Delivery of Double chambered restrained joint DI K9 Pipes confirming to IS 8329 (restrained joints are designed and tested as per ISO 10804) (to be used to for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985 /8329-2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specials.300mm Dia
11
5862
64487.83
... More
Manufacturing, Supply, Delivery of Double chambered restrained joint DI K9 Pipes confirming to IS 8329 (restrained joints are designed and tested as per ISO 10804) (to be used to for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985 /8329-2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specials 350mm Dia
11
7129
78422.74
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994)100mm Dia
11
66
731.83
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994)150mm Dia
11
108
1192.07
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994)200mm Dia
11
157
1733.05
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994)250mm Dia
11
212
2341.46
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994)300mm Dia
11
275
3028.41
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994)350mm Dia
11
345
3798.41
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.)100mm Dia
2
179
359.3
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.)150mm Dia
2
217
435.28
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.)200mm Dia
2
236
472.92
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.)250mm Dia
2
266
533
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.)300mm Dia
2
303
606.4
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.)350mm Dia
2
359
719.32
... More
Manufacture, Supplying and fitting Ductile Iron Double Chambered Restrained Joint fittings confirming to IS 9523 : 2000 (restrained joints are designed and tested as per ISO 10804) of Class K-12 (Alternative and to avoid concrete thrust blocks along with minimum length of Restrained joint DI pipes at bends) including rubber gasket confirming to IS 5382 : 1985 and locking bars & rubber gaskets etc complete but excluding TaxesDuctile Iron Double Chambered Restrained Joint Fittings upto 500mm dia
500
366
183490
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHa) 0.0 m To 3.0 m Depth
13901.93
133
1859661.18
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHb) 3.0 m To 6.0 m Depth(including dewatering)
4345.67
160
695524.48
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHc) 6.0m(including dewatering)
751.36
197
148528.84
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
2146.78
481
1032708.52
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm hard granite machine crushed metal mechanically mixed , compacted by vibration including curing for 14 days including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawings and technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MORTH and directed by the departmental officers PCC bedding for Power Conduit crossings
226.88
5220
1184481.49
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete and as directed by Engineer-in-charge
2373.66
115
273279.48
... More
Supply of the HDPE Electrical pipe conduits with permanent Lubricant inner layer with ribs , dimensional ratio of 13.5, deflection not greater than 5% when exposed to the normal operating temperature 90 degrees centigrade under the overburden soil pressure and other physical properties confirming to ASTMF 2160 and / or NEMA TC 7 ( The expected service life of HDPE Pipe conduit and accessories shall not be less than 50 years) including transportation225mm Dia HDPE Pipes
11217
3297
36983682.87
... More
Lowering Laying and jointing of 225mm HDPE electrical pipe conduits with silicore lubricant inner layer having ribs with Push fit coupler and as per drawing in ready made trenches true to alignment and gradient and maintain specified spacing with spacers (excluding cost of spacer ) including all materials labour charges and all other incidential charges etc complete for finished item of work as per drawing and as directed by the Engineer-in-Charge.
11217
133
1501171.11
... More
Manufacture, Supply and Delivery of RCC NP4 Socket and Spigot pipes conforming to B.I.S. 458/2003 (rate per meter of effective length) inclusive of Transportation.800mm Dia RCC NP4
63.39
8464
536595.08
... More
Manufacture, Supply and Delivery of RCC NP4 Socket and Spigot pipes conforming to B.I.S. 458/2003 (rate per meter of effective length) inclusive of Transportation.1600mm Dia RCC NP4
113.46
23187
2630848.08
... More
Lowering the RCC pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/1985. 800mm Dia RCC NP4
63.39
648
41123.63
... More
Lowering the RCC pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/1985. 1600mm Dia RCC NP4
113.46
1715
194650.84
... More
Providing Spacers of Acrylonitrile Butadiene Styrene (ABS) material make with 10mm thk for HDPE Pipe conduits including placing, positioning at 1.5 mtr interval as directed by engineer-in-charge.Spacers For Power Duct FOR 225 MM DIA PIPE
5609
210
1177890
... More
Supply and Laying of Warning tape of 225 mm thick in excavated trenches in two layer ,one Yellow colour tape at 100 mm and 250mm width Below FRL and Red colour tape at 400 mm and as directed by engineer-in-charge.
3542.25
29
102725.25
... More
Supply & Placing of chequered Cement concrete heavy duty tiles confirming to IS 1380 using aggregate cement pigments of of 25 mm thick(any shade-300 x300 mm) set over base coat of cement mortar 1:6 12 mm thick over cc bed already laid or RCC roof slab,including near cemnt slurry of honeylike consistency spread at the rate 3.3 kgs/sqm and jointed with need cement to full depth mixed with pigment of matching shade including cost of all materials like cement,sand,water and tiles etc ,complete finished item of work.
1413.12
1073
1516390.81
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHa) 0.0 m To 3.0 m Depth
947.15
133
126700.26
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHb) 3.0 m To 6.0 m Depth including dewatering
1300.79
160
208191.44
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm hard granite machine crushed metal mechanically mixed , compacted by vibration including curing for 14 days including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawings and technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MORTH and directed by the departmental officers
28.21
5220
147277.08
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authoritya) Raft
79.2
5667
448838.28
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authorityb) Walls 300 mm thick
44.3
9264
410402.29
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authorityb) Walls 200 mm thick
18.26
11157
203740.52
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authorityb) Walls 250 mm thick
67.13
10021
672750.01
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authorityb) Walls 350 mm thick
86.18
8723
751760.21
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authorityc) Slab
62.9
6020
378676.87
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
89.62
481
43111.7
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) /(Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, complete and as directed by the Engineer in Charge.
59.06
91446
5400802.53
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete and as directed by Engineer-in-charge
1805.57
115
207875.27
... More
Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery and Fixing of Heavy Duty manhole covers and frames - 24x24 HD 20 with ISI marking anywhere in A.P., F.O.R. destination including, loading, unloading & stacking at site etc., complete
23
2147
49388.36
... More
Manufacture as per company’s standard specification supply and delivery of encapsulated plastic steps for man holes anywhere in A.P. including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work etc, complete
388
188
73176.8
... More
Manufacture, supply,delivery and fixing of GI Electrode of 40mm Dia and 3m Length and transportation anywhere in Andhra Pradesh.
24
540
12969.84
... More
Providing and Supply of FRP Gratings of 38x38mm mesh with 7/5mm rib of 38mm thick including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work etc, complete.
2.88
2447
7047.36
... More
Providing and Fixing of MS ISA 50x50x6mm for for man holes anywhere in A.P. including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work and one coat of primer etc, complete as per drawing and as instructed by the departmental Engineers
86.4
107
9325.15
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHa) 0.0 m To 3.0 m Depth
243
133
32506.11
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHb) 3.0 m To 6.0 m Depth(including dewatering)
82.24
160
13162.51
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
358.92
481
172658.47
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm hard granite machine crushed metal mechanically mixed , compacted by vibration including curing for 14 days including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawings and technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MORTH and directed by the departmental officers
20.17
5220
105302.33
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete and as directed by Engineer-in-charge
409.83
115
47183.73
... More
Brick Masonry in CM (1:4) with Modular Bricks 19 x 9 x 9 cms 2nd class complete excluding pointing and plastering as per drawig and technical specifications clauses 600,1202 & 1203 MORD/1300 MORTH including cost and conveyance of materials to site with all leads & lifts , all other incidental and operational charges etc., complete and as directed by the Engineer-in-charge
2.15
9125
19620.04
... More
Manufacture, Supply and Delivery of RCC NP4 Socket and Spigot pipes conforming to B.I.S. 458/2003 (rate per meter of effective length) inclusive of Transportation.400mm Dia RCC NP4
54
2795
150975.36
... More
Manufacture, Supply and Delivery of RCC NP4 Socket and Spigot pipes conforming to B.I.S. 458/2003 (rate per meter of effective length) inclusive of Transportation.500mm Dia RCC NP4
54
3542
191316.06
... More
Lowering the RCC pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/1985. 400mm Dia RCC NP4
54
335
18126.18
... More
Lowering the RCC pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/1985. 500mm Dia RCC NP4
54
410
22185.9
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHa) 0.0 m To 3.0 m Depth
4917.88
133
657864.81
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHb) 3.0 m To 6.0 m Depth(including dewatering)
1050.3
160
168100.52
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
390.11
481
187662.42
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete and as directed by Engineer-in-charge
574.78
115
66174.42
... More
Manufacture, supply, & delivery of (DWC) structured wall polyethylene/polypropylene piping system with nonsmooth external annular corrugated and smooth internal surface (Double Wall) for nonpressure sewage & Drainage application pipes of standard length 6 m, grade conforming to IS 16098 (part-II: 2013) including transportation to anywhere in A.P .200mm DWC Pipe
712
602
428737.92
... More
Laying of SN8 structured wall (External Annular Corrugated & Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth & alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe & sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications & detail engineering, including carriage of pipes & fittings from site stacks to the place of laying etc. as per direction of Engineer-in-charge. (Payment to be made on the basis of actual finished length of pipe line).200mm DWC Pipe
711.1
137
97754.92
... More
Providing and constructing of precast RCC circular manhole of grade M-30,Type- A ,900 mm internal diameter according to drawing, fixing (slant portion of 0.64 m and raft 0.3 m) with cover and frame (heavy duty, 24x24 HD-20 grade designation) , total weight of cover and frame to be not less than 182 kg, Plastering with SRC cement motor 1:3 including centering shuttering and HYSD FE500 all complete as per standard design and as directed by Engineer in charge.
2
18675
37351.84
... More
Wall Extra Depth for every 1.0 m depth beyond 0.64 m and inling with SRC cement motor of 1:3. With Wall thickness 150mm including Reinforcement HYSD FE500 ,centering etc For Type-A Manhole
1.99
10637
21167.83
... More
Supply and placing of Plain Cement concrete M15 nominal mix prop (Cement : fine aggregate: coarse aggregate ) using 40mm guage hard granite machine crushed metal including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawing, technical specifications standard design and as directed by Engineer in charge. (If quantity of cement increase/decrease the rate will be deducted as per design mix) PCC - M15 For Benching for type A manhole
0.6
5374
3224.48
... More
Providing and constructing of precast RCC circular manhole of grade M-30,Type- B, 1200mm internal diameter according to drawing, fixing (Slant portion of 1.15m and raft0.3m) with cover and frame (heavy duty,24x24 HD-20 grade designation) , total weight of cover and frame to be not less than 182 kg. Plastering with SRC cement motor 1:3 including centering shuttering and Reinforcement HYSD FE 500all complete as per standard design and as directed by Engineer in charge
3
30308
90925.5
... More
Wall Extra Depth for every 1.0 m depth beyond 1.15 m and inling with SRC cement motor of 1:3.With Wall thickness 150mm including Reinforcement HYSD FE500,centering For Type-B Manhole
3.94
16362
64469.47
... More
Supply and placing of Plain Cement concrete M15 nominal mix prop (Cement : fine aggregate: coarse aggregate ) using 40mm guage hard granite machine crushed metal including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawing, technical specifications standard design and as directed by Engineer in charge. (If quantity of cement increase/decrease the rate will be deducted as per design mix) PCC - M15 For Benching for type B manhole
1.65
5374
8867.31
... More
Providing and constructing of precast RCC circular manhole of grade M-30,Type- C, 1500 mm internal diameter according to drawing, fixing (Slant portion of 1.5 m and raft 0.33 m) with cover and frame (heavy duty,24x24 HD-20 grade designation), total weight of cover and frame to be not less than 182 kg. Plastering with SRC cement motor 1:3 including centering shuttering and Steel Reinforcement HYSD Steel FE 500 all complete as per standard design and as directed by Engineer in charge.
21
44163
927426.15
... More
Wall Extra Depth for every 1.0 m depth beyond 1.5 m and inling with SRC cement motor of 1:3.With Wall thickness 200mm including Reinforcement HYSD FE500,centering etc For Type-C Manhole
58.18
25877
1505529.68
... More
Supply and placing of Plain Cement concrete M15 nominal mix prop (Cement : fine aggregate: coarse aggregate ) using 40mm guage hard granite machine crushed metal including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawing, technical specifications standard design and as directed by Engineer in charge. (If quantity of cement increase/decrease the rate will be deducted as per design mix) PCC - M15 For Benching for type C manhole
18.37
5374
98722.77
... More
Manufacture as per company’s standard specification supply and delivery of encapsulated plastic steps for man holes anywhere in A.P. including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work etc.
269
188
50733.4
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHa) 0.0 m To 3.0 m Depth
4378.18
133
585669.14
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
2842.22
481
1367249.93
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm hard granite machine crushed metal mechanically mixed , compacted by vibration including curing for 14 days including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawings and technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MORTH and directed by the departmental officersFor PCC Bedding
7.09
5220
37015.05
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete and as directed by Engineer-in-charge
2849.32
115
328042.21
... More
Manufacture, Supply and Delivery of RCC NP4 Socket and Spigot pipes conforming to B.I.S. 458/2003 (rate per meter of effective length) inclusive of Transportation.600mm Dia RCC NP4
15.79
4776
75425.2
... More
Lowering the RCC pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/1985. 600mm Dia RCC NP4
15.79
456
7211.77
... More
Supply and Transportation of double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Makes: DURA LINE (Dura Guard)/Precision/CPE or any ISI approved make .For Outer dia 160 mm and Inner dia 136 mm
22974.13
529
12163653.13
... More
Lowering& Jointing of double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Makes: DURA LINE (Dura Guard)/Precision/CPE or any ISI approved make . For Outer dia 160 mm and Inner dia 136 mm
22974.13
21
485213.63
... More
Providing of 7 way ( Multi duct for ICT) with permanent Lubricant inner layer with ribs , dimensional ratio of 13.5, deflection not greater than 5% when exposed to the normal operating temperature 90 degrees centigrade under the overburden soil pressure and other physical properties confirming to ASTMF 2160 and / or NEMA TC 7 ( The expected service life of HDPE Pipe conduit and accessories shall not be less than 50 years) including transportation
30674.74
1085
33282706.39
... More
Laying and Jointing of 7 Way 40mm Multi Duct in ready made trenches true to alignment and gradient with push fit coupler including all sundries but excluding cost & conveyance of pipes from source of supply and jointing materials etc, complete and as directed by Engineer-in-charge
30674.74
40
1246621.27
... More
Providing Spacers of Acrylonitrile Butadiene Styrene (ABS) material make with 10mm thk for HDPE Pipe conduits including placing, positioning at 1.5 mtr interval as directed by engineer-in-charge.Spacers for ICT : DWC- 6 & 7 Way-8
2549
2620
6678380
... More
Providing Spacers of Acrylonitrile Butadiene Styrene (ABS) material make with 10mm thk for HDPE Pipe conduits including placing, positioning at 1.5 mtr interval as directed by engineer-in-charge.Spacers for ICT : DWC- 2 & 7 Way-4
3
1100
3300
... More
Providing Spacers of Acrylonitrile Butadiene Styrene (ABS) material make with 10mm thk for HDPE Pipe conduits including placing, positioning at 1.5 mtr interval as directed by engineer-in-charge.Spacers for ICT : DWC- 2 & 7 Way-6
7
1440
10080
... More
Supply and Laying of Warning tape of 225 mm thick in excavated trenches in two layer ,one Yellow colour tape at 100 mm and 250mm width Below FRL and Red colour tape at 400 mm and as directed by engineer-in-charge.
7679.1
29
222693.9
... More
Supply & Placing of chequered Cement concrete heavy duty tiles confirming to IS 1380 using aggregate cement pigments of of 25 mm thick(any shade-300 x300 mm) set over base coat of cement mortar 1:6 12 mm thick over cc bed already laid or RCC roof slab,including near cemnt slurry of honeylike consistency spread at the rate 3.3 kgs/sqm and jointed with need cement to full depth mixed with pigment of matching shade including cost of all materials like cement,sand,water and tiles etc ,complete finished item of work.
3223.89
1073
3459491.88
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHa) 0.0 m To 3.0 m Depth
299.8
133
40104.25
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHb) 3.0 m To 6.0 m Depth(including dewatering)
253.51
160
40574.28
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm hard granite machine crushed metal mechanically mixed , compacted by vibration including curing for 14 days including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawings and technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MORTH and directed by the departmental officers
10.74
5220
56070.75
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authoritya) Raft
30.66
5667
173754.82
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authorityb) Walls 250mm thcik
85.46
10021
856445.94
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authorityb) Slab
14.79
6020
89040.24
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
38.35
481
18448.27
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) /(Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, complete and as directed by the Engineer in Charge.
10.47
91446
957439.93
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete and as directed by Engineer-in-charge
227.56
115
26198.98
... More
Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery and Fixing of Heavy Duty manhole covers and frames - 24x24 HD 20 with ISI marking anywhere in A.P., F.O.R. destination including, loading, unloading & stacking at site etc., complete
11
2147
23620.52
... More
Manufacture as per company’s standard specification supply and delivery of encapsulated plastic steps for man holes anywhere in A.P. including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work etc, complete but excluding all taxes.
216
188
40737.6
... More
Providing and Supply of FRP Gratings of 38x38mm mesh with 7/5mm rib of 38mm thick including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work etc, complete but excluding all taxes.
3.96
2447
9690.12
... More
Providing and Fixing of ISA 50x50x6mm for man holes anywhere in A.P. including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work,including cost of one coat of primer etc, complete but excluding all taxes.
118.8
107
12822.08
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHUpto 3m
4939.2
133
660716.78
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
1234.8
481
594000.54
... More
Supply, delivery, laying and jointing of Smooth Wall 40mm outer dia and 33mm inner dia Permanently Lubricated HDPE Telecom Duct with Silicore inner layer and 4mm PP Rope in 500mts Coil format confirming to TEC GR.No.TEC/GR/TX/CDS-008-03, March-2011 with Amdt. No.1, dt:25/28.03.2013 etc., complete and as directed by Engineer-in-charge40 mm OD HDPE Pipe
62720
55
3449600
... More
Manufacture, Supply and Delivery of RCC NP4 Socket and Spigot pipes conforming to B.I.S. 458/2003 (rate per meter of effective length) inclusive of Transportation.300mm RCC NP4 Pipe
2304
1881
4333824
... More
Lowering the RCC pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/1985 etc., complete and as directed by Engineer-in-charge300mm RCC NP4 Pipe
2304
262
604431.36
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm guage hard granite machine crushed metal including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete for levelling course as directed by the departmental officers.
0.97
5220
5064.12
... More
Vibrated reinforced cement concrete M 25 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 403 kgs)Note : The rate shall be adjusted as per the approved design mix by the competent authority
3.24
5663
18349.16
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, complete and as directed by the Engineer in Charge.
0.19
91446
17374.75
... More
Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery and Fixing of Heavy Duty manhole covers and frames of 24x24 HD-20 with ISI marking anywhere in A.P., F.O.R. destination including, loading, unloading & stacking at site.
32
2147
68714.24
... More
Environmental and Social Management Plan as per Standard norms and guidelines including cost of all materials, machinery, labour, all operations for finished item of work, as directed by Engineer in Charge
1
17904741
17904741.12
... More
Arrangement of transportation facility by four wheeler for purpose of site inspection and official use of the departmental officers and Engineers during execution period including fuel, maintenance charges & driver charges and the vehicle for not less than 3500 Km per Month and the vehicle should not be older than 5 years.
24
45000
1080000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements