Amaravati Development Corporation Limited Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Amaravati Development Corporation Limited - ADCL Tender
Civil And Construction
Road Construction
Drainage Work
Consultancy Services
Civil And Architectural Services
Water Storage And Supply
Opening Date9 Jan 2025
Closing Date31 Jan 2025
Tender Amount₹ 4,19,96,49,642
Costs
EMD
₹ 4,19,96,496Document Cost
Refer DocumentsTender Fee
₹ 20,000
Summary
World Bank And Adb Financed Capital City Development Program Related 'construction Of Balance Smart Trunk Infrastructure With Roads, Storm Water Drains, Water Supply Network, Sewerage Network, Utility Ducts For Power& Ict, Reuse Waterline, Pedestrian Tracks, Cycle Tracks, Avenue Plantation And Street
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
778916Tender No
310/ADCL/IPD/2024-25Tender Authority
Amaravati Development Corporation Limited ViewPurchaser Address
-Website
http://http://ccdmc.co.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Forming Subgrade with borrowed useful earth from outside road boundary by mechanical means up to SDR with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soil on the embankment, spreading soil, breaking clods, sectioning, grading and consolidation with 8 to 10 Tonnes Vibratory Road Roller @ OMC to meet requirement of table 300-1 & 300-2 of MoRT&H, including all hire and operational charges of T&P , etc., complete for finished item of work as per MoRT&H specification 305 (5th Revision) , satisfying the Free Swell Index value less than 50%, soaked CBR value not less than 8% and other reqirements from clause 305 (5th Revision) and as directed by the Engineer in Charge.
169400.99
1668
282569321.37
... More
Filling of Median / Island with excavated material deposited at site from roadway cutting and excavation for drain and foundation of other structures, spread, graded and compacted with Plate compactor as per drawing, Technical Specifications Clause 408 (5th Revision) with all leads and lifts complete for finished item of work and as directed by the Engineer in Charge
17434.46
381
6650549.11
... More
Filling of Median / Island with approved material obtained from selected borrow source as per drawing, Technical Specifications Clause 408 (5th Revision) with selected borrowed useful earth from outside road boundary by mechanical means up to SDR with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soil on the embankment, spreading soil, breaking clods, sectioning and compacting to meet requirements including all hire and operational charges of T&P, etc, complete for finished item of work and as directed by the Engineer in Charge
17434.46
2336
40734221.03
... More
Loosening and Recompaction of Existing Ground up to a level of 500mm supporting Emabankment / Subgrade to the required compaction to meet the requirements of Table 300-2 of MoRTH, including all hire and operational charges of T&P etc., complete for finished item of work as per MoRT&H specification 305 (5th Revision) , and as directed by the Engineer in Charge .
1000
118
118800
... More
Construction of Granular sub-base by providing HBG material confirming to Grading - VI of MoRT&H Table 400-1 including cost and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavator / approved means at OMC and compacting with vibratory roller to achieve the desired density etc., complete for finished item of work as per MoRT&H Specification 401 (5th revision) and as directed by the Engineer-in-charge.
90237.46
2015
181917816.99
... More
Providing, Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem specification including cost of all materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in base courses on well prepared surface and compacting with Vibratory roller to acheive the desired density etc., as directed by the Engineer-in-Charge and as per MoRT&H specification 406 (5th revision) for finished item of work.
65742.6
2853
187619519.01
... More
Providing and applying prime coat with bitumen emulsion (SS-1) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.85 kg/sqm using mechanical means for finished item of work as per MoRT&H Specification 502 (5th Revision).
426207.5
77
32975674.28
... More
Providing and applying tack coat with bitumen Emulsion (RS-1) (Bulk) using Emulsion pressure distributor at the rate of 2.5 kg to 3.0 kg / 10 sqm over granular surface treated with primer cleaned with mechanical broom for finished item of work as per MoRT&H Specification 503 (5th revision) and as directed by the Engineer-in-Charge.
86465.2
16
1428405.1
... More
Providing and applying tack coat with bitumen Emulsion (RS-1) (Bulk) using Emulsion pressure distributor at the rate of 2.0 to 3.0 kg /10 sqm over bituminous surface cleaned with mechanical broom for finished item of work as per MoRT&H Specification 503 (5th revision) and as directed by the Engineer-in-Charge.
637367.68
15
9764472.86
... More
Providing and laying of Dense Graded Bituminous Macadam with 100-120 TPH Batch type HMP Producing an average output of 75 tonne per hour using crushed aggregates of Grading - II as per table 500-10 of MoRT&H Specification 505 (5th revision) premixed with bitumen binder VG 40 grade @ 4.50% of weight of total mixture, transported to site, laid over a previously prepared surface with Hydrostatic paver finisher with sensor to the required grade, level and alignment and rolled with smooth wheeled, vibratory and tandem rollers as per Clauses 501.6 and 501.7 to achieve the desired compaction for finished item of work as directed by the Engineer-in-Charge including hire and operational charges all T&P and all other contingent charges necessary including cost of of all materials etc., complete as per MoRT&H specification No. 505 (5th revision)
36648.64
9841
360684920.29
... More
Providing Bituminous Concrete with 100-120 TPH Batch type hot mix plant producing an average output of 75 tonne per hour using HBG crushed aggregates of Grading-I as per table 500-17 of specification 507 of MoRT&H (5th Revision), premixed with bitumen binder VG-40 Grade @ 5.2 % of mix and filler, transporting the hot mix to work site, laying with Hydroststic paver finisher with sensor to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H Specification 507 (5th Revision) complete for finished item of work in all respects as directed by Engineer-in-Charge
15934.19
10996
175223347.83
... More
Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm Type-A aggregates using VG-30 grade bitumen @ 22 kg/10 sqm and colour pigment to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a Smooth wheeled roller 8-10 tonne capacity, and finishing to required level and grade as per MoRT&H Specification 508 (5th Revision) complete for finished item of work in all respects as directed by Engineer-in-Charge
83676
192
16086711
... More
Earthwork excavation in soils up to SDR by mechanical means for foundations of structures as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing sides of bottom, back filling the excavation earth to the extent required etc., complete including charges for finished item of work as per MoRT&H specification 304 (5th Revision) and as directed by the Engineer-in-Charge . In all types of soil by mechanical means (0 to 3m)
2770
153
425832.1
... More
Earthwork excavation in soils up to SDR by mechanical means for foundations of structures as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing sides of bottom, back filling the excavation earth to the extent required etc., complete including charges for finished item of work as per MoRT&H specification 304 (5th Revision) and as directed by the Engineer-in-Charge . In all types of soil by mechanical means (3 to 6m)
1016
175
178501.04
... More
Earthwork excavation in soils up to SDR by mechanical means for foundations of structures as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing sides of bottom, back filling the excavation earth to the extent required etc., complete including charges for finished item of work as per MoRT&H specification 304 (5th Revision) and as directed by the Engineer-in-Charge . In all types of soil by mechanical means ( 6m)
1070
216
231986.7
... More
Earthwork excavation in soils up to SDR by mechanical means for foundations of structures as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing sides of bottom, back filling the excavation earth to the extent required etc., complete including charges for finished item of work as per MoRT&H specification 304 (5th Revision) and as directed by the Engineer-in-Charge . In Ordinary rock (0 to 3m)
209
193
40366.26
... More
Vibrated cement concrete M 15 Grade Concrete as levelling coarse using 40mm , 20mm and 10mm size HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, and conveyance of all materials to site and all labour charges ,centering, machine mixing, laying in position, Compacting , Vibrating and curing including all other incidental and all other operational charges of T&P required etc., complete as per MoRT&H Specification 1700, 2100 (5th Revision) for footings leveling course.Minimum quantity of 275 kg cement to be used per cum of concrete.For Bridges
83
6495
539119.03
... More
Bored cast-in-situ piles of M-35 grade concrete, 1200mm dia, excluding reinforcement complete as per drawing, technical specification section 1100 (5th Revision) including all charges , removal of excavated earth with all leads and lifts and as directed by the Engineer in Charge.minimum quantity of 420 kg cement to be used per cum of concrete.
1575
15089
23766545.25
... More
VRCC M35 grade controlled concrete (design mix) using 20mm maximum size (SS.5) HBG metal (graded) including cost and conveyance of all materials to site , all labour charges shuttering and machine mixing, laying, vibrating curing and finishing etc., complete including all other incidental and operational charges, hire charges of all T&P etc., complete but excluding cost of steel and its fabrication charges etc., and as per MORTH specification No.1100, 1500, 1600 &1700, (5th Revision) for pile caps.minimum quantity of 422 kg cement to be used per cum of concrete.
1385
6438
8917017.8
... More
Providing steel liner of 6 mm thick including fabricating and setting out as per detailed drawing confirming to MORTH specification 1100 (5th Revision) and as directed by the Engineer-in-charge.
172.5
118049
20363618.1
... More
Vibrated reinforced cement concrete M 30 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per MoRT&H specification 1500,1600,1700 & 2100 (5th revision ) and as directed by the Engineer-in-Charge for Foundation.minimum quantity of 407 kg cement to be used per cum of concrete.For bridges
41
6443
264194.98
... More
Vibrated reinforced cement concrete M 35 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost and conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per MoRT&H specification 1500,1600,1700 & 2200 (5th revision ) and as directed by the Engineer-in-Charge for Substructure.minimum quantity of 422 kg cement to be used per cum of concrete.For Bridges
669
6945
4646559.57
... More
Vibrated reinforced cement concrete M 30 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost and conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per MoRT&H specification 1500,1600,1700 & 2200 (5th revision ) and as directed by the Engineer-in-Charge for Substructure.minimum quantity of 407 kg cement to be used per cum of concrete.For bridges
35
6845
239598.1
... More
Vibrated reinforced cement concrete M 40 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost and conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per MoRT&H specification 1500,1600,1700 & 2200 (5th revision ) and as directed by the Engineer-in-Charge for Substructure.minimum quantity of 430 kg cement to be used per cum of concrete.For Bridges
36
6996
251862.84
... More
Vibrated reinforced cement concrete / Prestressed Cement Concrete using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost and conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per MoRT&H specification 1500,1600,1700,1800 & 2300 (5th revision ) and as directed by the Engineer-in-Charge for Super structure.minimum quantity of 422 kg cement to be used per cum of concrete for RCC M35.For bridges
1558
8037
12522004.34
... More
Vibrated reinforced cement concrete / Prestressed Cement Concrete using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost and conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per MoRT&H specification 1500,1600,1700,1800 & 2300 (5th revision ) and as directed by the Engineer-in-Charge for Super structure.minimum quantity of 465 kg cement to be used per cum of concrete for RCC M45.For bridges
857
8244
7065193.7
... More
Providing Constructing, Transporting and placing in position of precast Post Tensioned Concrete "I" girders using M45 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel & HT Strands and its fabrication & prestressing charges for finished item as per MoRT&H specification 1500,1600,1700,1800 & 2300 (5th revision) and as directed by the Engineer-in-Charge for Super structure as per drawing and technical specifications. Minimum quantity of 465kg cement to be used per cum of concrete.For Bridges
973
16252
15813808.99
... More
Providing & Constructing Cast in situ Post Tensioned Concrete "Box" girders using M35 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel & HT Strands and its fabrication & prestressing charges for finished item as per MoRT&H specification 1500,1600,1700,1800 & 2300 (5th revision) and as directed by the Engineer-in-Charge for Super structure as per drawing and technical specifications. Minimum quantity of 422 kg cement to be used per cum of concrete.For Bridges
2731
9339
25506775.32
... More
Vibrated cement concrete M 15 Grade Concrete under approach slabs using 40mm , 20mm and 10mm size HBG/HBT crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, Compacting , Vibrating and curing including all other incidental and all other operational charges of T&P required etc., complete as per MoRT&H Specification 1700, 2100 ,2700 (5th Revision) for leveling course.minimum quantity of 275 kg cement to be used per cum of concrete.
47
6495
305284.27
... More
Vibrated reinforced cement concrete M 30 grade for Approach slab using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost and conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work as per Approved drawing including cost of steel and its fabrication charges as per MoRT&H specification 1500, 1600,1700, & 2704 (5th Revision) and as directed by the Engineer-in-Charge. Minimum quantity of 407 kg cement to be used per cum of concrete.
95
12090
1148620.3
... More
Providing and laying (65mm thick) wearing course comprising of 40mm asphalt concrete over 25 mm thick mastic asphalt including cost of prime coat, prepared by using mastic cooker and laid to required level and slope after cleaning the surface, all complete as per Drawings, Technical Specifications clause 507, 516 & sub clause 2702 (5th Revision) and as directed by the Engineer in Charge
3584
1406
5039605.76
... More
Construction of Ornamental Railing complete as per approved drawings and as per MORTH Section 2200 & clause 2703 (5th Revision).For bridges
804
4489
3609742.92
... More
Provision of Reinforced cement concrete crash barrier at the edges of the road, approaches to bridge structures and medians, constructed with M-40 grade concrete with HYSD bars of Fe-500 D grade reinforcement conforming to IRC:21 and dowel bars 25 mm dia, 450 mm long at expansion joints filled with pre-moulded asphalt filler board, keyed to the structure on which it is built and installed as per design given in the enclosure to MORTH circular No. RW/NH - 33022/1/94-DO III dated 24 June 1994 as per dimensions in the approved drawing and at locations directed by the Engineer, all as specified as per MORTH Section 800, 2200 & clause 2703 (5th Revision).minimum quantity of 430 kg cement to be used per cum of concrete.For Bridges
718
4312
3096080.62
... More
Providing and fixing Stripseal expansion joints complete as per Drawings, Technical Specifications Section 2600 (5th Revision) and as directed by the Engineer in Charge.For Bridges
340
6000
2040000
... More
Providing and fixing galvanized Drainage Spouts along with drain pipes complete as per drawing and Technical Specifications clause 2705 MORTH (5th Revision) as directed by the Engineer in Charge.For Bridges
226
2383
538657.44
... More
Providing and fixing bearings complete as per Drawings, Technical Specifications Section 2000 (5th Revision) and as directed by the Engineer in Charge-Tar Paper Bearings.For Bridges
26.88
80
2169.22
... More
Providing and fixing bearings complete as per Drawings, Technical Specifications Section 2000 (5th Revision) and as directed by the Engineer in Charge-Spherical Bearings.For Bridges
228
83893
19127672.4
... More
Providing, cutting, bending and fixing in position of HYSD bars of Fe-500 D grade reinforcement in reinforced concrete structures to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars complete as per drawing, Technical Specifications Section 1600 (5th Revision) including cost, conveyance of all materials to site and labour charges and as directed by the Engineer in Charge- bridge Foundation.For Bridges
432.5
92265
39904837.4
... More
Providing, cutting, bending and fixing in position of HYSD bars of Fe-500 D grade reinforcement in reinforced concrete structures to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars complete as per drawing, Technical Specifications Section 1600 (5th Revision) including cost, conveyance of all materials to site and labour charges and as directed by the Engineer in Charge- bridge Sub structure.For Bridges
85.2
92709
7898854.51
... More
Providing, cutting, bending and fixing in position of HYSD bars of Fe-500 D grade reinforcement in reinforced concrete structures to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars complete as per drawing, Technical Specifications Section 1600 (5th Revision) including cost, conveyance of all materials to site and labour charges and as directed by the Engineer in Charge- bridge Super structure.For Bridges
678.3
95669
64892642.2
... More
High tensile steel wires/strands including all accessories for stressing, stressing operations and grouting all complete as per drawings, Technical Specifications Clause 1800 (5th Revision) and as directed by the Engineer in Charge. For Bridges
48.5
142075
6890649.63
... More
Providing Weep holes in VRCC bridge Abutment/ Wing wall/return wall with 100mm Diameter PVC pipe extending through the full width of the structure at 1.00m C/C in both horizontal and vertical direction so that the weep holes in each horizontal direction is staggered from the weep holes laying above and below lines as shown in drawing including cost and conveyance of the PVC pipes and labour charges for cutting to required length, placing the pipe with a slope of about 1V : 20H towards stream side face etc., complete for finished item of work for weep holes as per MoRT&H specification 2706 & 2200 (5th Revision)For Bridges
264
275
72753.12
... More
Providing and painting with Synthetic enamel paints of approved quality on bridges with Bridge No. and Span arrangements as per IRC-7,1971 complete as per drawing, Technical Specifications Section and as directed by the Engineer in Charge.For Bridges
6
40
242.16
... More
Providing and Applying ordinary paints of approved quality on surface of parapets as per Drawings, Technical specification clause 803 (5th Revision) and as directed by the Engineer in Charge.For Bridges
1441
152
220228.03
... More
Providing and painting of flood gauge on sub-structure to full height and 500 mm width as per the drawings, Technical specification clause 803 (5th Revision) and as directed by the Engineer in Charge.For Bridges
18
202
3639.06
... More
Providing, laying and fixing of HDPE pipe of 160mm dia complete as per Drawing, Technical Specifications and as directed by the Engineer in Charge.For Bridges
718
656
471417.26
... More
Providing and constructing inlet chambers of 0.6mx0.6mx0.6m dimensions with RCC M25 grade of concrete for Raft and walls and M15 grade of concrete for Levelling Course, with galvanised gratings and PVC/HDPE pipe 150mm dia as per drawing and Technical Specifications Section 1500, 1600 & 1700 (5th Revision) and as directed by the Engineer in Charge.
1860
11544
21473346.6
... More
Providing and Laying Plain Cement Concrete M 20 kerb with top and bottom width 115 and 165mm respectively, 390mm high over WMM kerb stone laid with kerb laying machine as per drawing including cost, conveyance of all materials to site and labour charges etc complete as per Technical Specifications Clauses 409 and Section 1700 (5th Revision) and as directed by the Engineer in Charge.minimum quantity of 344 kg cement to be used per cum of concrete. -Grade M 20 for Kerb "A" Type Section over WMM
85877.6
286
24568722.58
... More
Providing and Laying Plain Cement Concrete M 20 kerb with top and bottom width 115 and 465mm respectively, 365mm over WMM kerb stone laid with kerb laying machine as per drawing including cost, conveyance of all materials to site and labour charges etc complete as per Technical Specifications Clauses 409 and Section 1700 (5th Revision) and as directed by the Engineer in Charge.minimum quantity of 344 kg cement to be used per cum of concrete. -Grade M 20 for Kerb "L" Type Section over WMM
27892
469
13081348
... More
Providing and Laying kerb painting with with two coats on the surface with synthetic enamel paint grade-I (IS:164) in all shades on new plastered concrete surfaces after back filling including cost, conveyance of all materials to site and labour charges etc complete as per drawing, Technical Specifications Clause 803 (5th Revision) and as directed by the Engineer in Charge
48498.9
131
6369845.53
... More
Construction of footpath/separator by providing 60mm paver blocks-M35 grade, 30mm sand fill below it including cost, conveyance of all materials to site and labour charges etc complete as per the technical specification of MoRTH& APDSS as per drawings and as directed by the Engineer -in- Charge
83676
757
63346915.8
... More
Supplying of hot applied thermoplastic road marking compound, 2.50mm thick including reflectorising glass beads @ 250gms with Reflectorising Glass beads on Bituminous surface at 250gms per Sqm area, thickness of 2.50mm is exclusive of surface applied glass bead as per MoRTH section 803.40 & IRC 35 -2015 , the material should be satisfy MoRTH specifications 803.40 and must comply with the following a) White index for the product should be in the range of 60-70 when measured against standard reference. The applied panel 7/8 number must be submitted for checking up the white index in the department lab .In case the department approves the white index box of any vendor, the department engineer may carryout random checking of the appplied products at site against the approved panel. In case of any major deviation, beyond acceptance limit, department reserve the right to cancel or reject the total supplied consignment of the said material and will compell the vendor has to replace the full consignment by the desired material as per approved panel at his own cost and additional demurrages may be claimed due to loss of man days (as per the rules of the department), b)The Luminance factor of the material should be in the range of 80-85% at 45 degrees centigrade as per AASTHOM 249. c) Crack resistance: The applied panel cured for 7 days under ambient condition and then should be tested as per BS3262 part-1, 1989 and should pass at the range of 0 degree centigrade to '-10 ' degree centigrade. D) Adhesion : Strong E) Softening point 102 degree centigrade F) Dried film finish : Smooth and uniform G) Night Vision: High as directed by the Engineer-in-Charge and confirming to IS 164-1961 (1st revision reaffirmed in 1986) and clause conforming to IRC 35-2015 & MoRTH section 803.4-Lane / Center line / Edge marking / Transverse marking and any other marking
12084.8
560
6767488
... More
Supplying of hot applied thermoplastic road marking compound, 2.50mm thick including reflectorising glass beads @ 250gms with Reflectorising Glass beads on Bituminous surface at 250gms per Sqm area, thickness of 2.50mm is exclusive of surface applied glass bead as per MoRTH section 803.40 & IRC 35 -2015 , the material should be satisfy MoRTH specifications 803.40 and must comply with the following a) White index for the product should be in the range of 60-70 when measured against standard reference. The applied panel 7/8 number must be submitted for checking up the white index in the department lab .In case the department approves the white index box of any vendor, the department engineer may carryout random checking of the appplied products at site against the approved panel. In case of any major deviation, beyond acceptance limit, department reserve the right to cancel or reject the total supplied consignment of the said material and will compell the vendor has to replace the full consignment by the desired material as per approved panel at his own cost and additional demurrages may be claimed due to loss of man days (as per the rules of the department), b)The Luminance factor of the material should be in the range of 80-85% at 45 degrees centigrade as per AASTHOM 249. c) Crack resistance: The applied panel cured for 7 days under ambient condition and then should be tested as per BS3262 part-1, 1989 and should pass at the range of 0 degree centigrade to '-10 ' degree centigrade. D) Adhesion : Strong E) Softening point 102 degree centigrade F) Dried film finish : Smooth and uniform G) Night Vision: High as directed by the Engineer-in-Charge and confirming to IS 164-1961 (1st revision reaffirmed in 1986) and clause conforming to IRC 35-2015 & MoRTH section 803.4-Pedestrian Crossing at junctions and median openings
1188
560
665280
... More
Providing and fixing Village name board size 600x800 mm made out of Type – XI of ASTMD 4956-09 wide angle cube cornered micro Prismatic Retro reflective sheeting and confirming to IRC 67:2012 for full background of Green Colour & White Letters and fixed over 3MM Alluminium Composite Material sheet having minimum 0.30mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back support frame of M.S angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 m from the ground level to the bottom of the board. The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of height. The signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials ,equipment, machinery and labour with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by Engineer –in-Charge.
8
8236
65888
... More
Providing & fixing junction boards of size 1500 x 1200 mm made out of Type – XI of ASTMD 4956-09 wide angle cube cornered micro Prismatic Retro reflective sheeting and confirming to IRC 67:2012 for full background of Green Colour & White Letters and fixed over 4MM Alluminium Composite Material sheet having minimum 0.5 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back support frame of M.S angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 m from the ground level to the bottom of the board. The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of height. The signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials ,equipment, machinery and labour with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by Engineer -in-Charge.
44
29525
1299100
... More
Providing and fixing of Route marker signs (450mm x 600mm) as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing
88
2580
227069.92
... More
Providing and fixing Cautionary / Warning sign boards size 900 mm equilateral triangle made out of Type – XI of ASTMD 4956-09 wide angle cube cornered micro Prismatic Retro reflective sheeting and confirming to IRC 67:2012 for full background of White colour and letters/logos done by screen printing in Black colour, boarders by screen printing in Red colour and fixed over 4MM Aluminium Composite Material sheet having minimum 0.5 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back support frame of M.S angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 m from the ground level to the bottom of the board. The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of height. The signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials ,equipment, machinery and labour with all leads and lift, loading chages necessary for satisfactory completion of the work as directed by Engineer -in-Charge.
8
6958
55664
... More
Providing and fixing Mandatory / Regulatory sign boards size 900 mm circle made out of Type – XI of ASTMD 4956-09 wide angle cube cornered micro Prismatic Retro reflective sheeting and confirming to IRC 67:2012 for full background of White colour and letters/logos done by screen printing in Black colour, boarders by screen printing in Red colour and fixed over 4MM Aluminium Composite Material sheet having minimum 0.5 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back support frame of M.S angle 25x25x3mm all roundand fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 m from the ground levelto the bottom of the board. The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of height. The Signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials ,equipment, machinery and labour with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by Engineer -in-Charge.
8
10231
81848
... More
Stop sign - Octagon of size 1200 mm complete including cost and conveyance of all materials ,equipment, machinery and labour with all leads and lift, loading chages necessary for satisfactory completion of the work as per drawings, Technical Specifications Clause No. 801 (5th Revision) and as directed by the Engineer in Charge
20
3020
60418.8
... More
Providing and fixing Mandatory (Give way sign) sign boards size 900 mm equilateral triangle made out of Type – XI of ASTMD 4956-09 wide angle cube cornered micro Prismatic Retro reflective sheeting and confirming to IRC 67:2012 for full background of White colour and letters/logos done by screen printing in Black colour, boarders by screen printing in Red colour and fixed over 4MM Aluminium Composite Material sheet having minimum 0.5 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back support frame of M.S angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 m from the ground level to the bottom of the board. The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of height. The signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials ,equipment, machinery and labour with all leads and lift, loading chages necessary for satisfactory completion of the work as directed by Engineer -in-Charge.
20
6958
139160
... More
Supplying and installation of delineators (Roadway indicators) not less than 800mm high above ground level. The delineator shall have a core and shell construction which shall be made of tough, high impact resistant, injection-molded, thermoplastic outer body. The inner core shall consist of powder coated or painted Mild steel of minimum thickness 1.0mm. The delineator should have top retro-reflective unit consisting of white color micro prismatic non metallic retro-reflective sheeting of minimum exposed area of 125 cm2 and bottom retro-reflective unit consisting of red color micro prismatic non metallic retro-reflective sheeting of minimum exposed area of 35 cm2 confirming to ASTM D4956 type XI standards and as per IRC -79. The delineators shall be fixed to the ground by inserting the root of the delineator up to the marked portion and by firm concrete filling as per the instructions by engineer in-charge.
47
2048
96256
... More
Supply and installation of Hazard Markers/Delenators using M.S angle of size 55x55x6 mm and 120 cm high above ground level painted with two coats of black & white strips of 15cm wide with first quality synthetic enamel paint over one coat of appropriate primer of approved brand, colour, with 30cm x 90cm Type- XI of ASTMD 4956-09 wide angle cube concerned micro prismatic Retro Reflective sheeting of Yellow yellow colour and confirming to IRC 67:2012 fixed over 3mm aluminum composite material having minimum 0.30mm thick Aluminium skin on both sides with standard supports consisting of alternately black and yellow strips, in screen printing slopoing downward at an angle of 45 degrees towards the side of the obstruction on which the traffic is to pass and buried into the ground in a trench of size 30cm x 30cm and 50cm depth filled with CC M-20 including cost and conveyhance of all materials, equipment,machinery and labour with all leads and lifts, loading and unloading charges necessary for successful completion of the work on any road in division as directed by the Engineer-in-charge and conforming to IRC 67-2012 & MoRT&H specification No 805 and approved drawings etc., complete for finished item of work.
8
4438
35504
... More
Providing and fixing Object markers 48.3mmdia. MS pipe ,keep at 50cm above ground level with 3MM Alluminium Composite Material sheet having minimum 0.30 mm thick Aluminium skin fully covered with type XI of wide angle cube cornered micro Prismatic Retro reflective sheeting and confirming to IRC 67:2012 reflective sheeting fixed in to trench of 30x30x30cm filled with CC M20 conforming to IRC-67:2012 & MORTH&H specification no 805 and approved drawing etc.,
88
1021
89848
... More
Providing and fixing of Moulded Shanks Raised Pavement Markers made of Polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lense face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 TypeH and complying to specifications of Category A of MORTH circular No.RW/NH-33023/10/97 - DO III dt. 11-o6-1997. The height, width and length shall not exceed 50mm, 100mm and with minimum reflecting area of 13 sqcm on each side and the slope to the base shall be 35 +/- 5 degrees The strength of detachment of the integrated cylindrical shanks (of diameter not less than 19 +/- 2mm and height not less than 30 +/- 2mm) from the body is to be a minimum values of 700kgs. Fixing will be by drilling holes on the road for the twin shanks to go inside without nails and using epoxy resign based adhesive as per manufacturers recommendation and complete as directed bythe Engineer.
14920
336
5013120
... More
Clearing the light Jungle like Shrub, bushes, grass, wild vegetation and it including all operational, incidental, labour charges, required tools, overheads & contractors profit complete for finished item of work
62128
3
197567.04
... More
Alignment and fixing planting point with 0.45 mtr length sticks incl mateal cost, transport and overheads and contractor propit complte for finised work. Central median plantation as per design @ 5 mtr c/c 5648 nos
5648
1
10279.36
... More
Earth work excavation for foundations Digging of pits for plant in ordinary soils 0.90x0.90x0.90 mtr (Tall Plants)
5648
155
875440
... More
Filling with Red soil (Red soil in this context it is defirng as sandy As per loamy garden soil congenial for plant growth which shall be of light textured, crystalline, porous and friable;·fertile, slightly acidic·:or neutral)in pits/trenches and including cost and conveyance of red s /1' to work site and it including all operational,incidental ,labour charges, required tools, overheads & contractors profit complete for finished item of work. 60% of the pit size for Central median Plantation (0.342 cub/pit) excluding ball of earth
5648
427
2414520
... More
Cost and Conveyance of Farm Yard Manure or dry cow dung powder including loading, unloading, internal transport and application. of the FYM into the pits/trenches and it including all operational, incidental,labour charges, required tools, overheads & contractors propit complete for finished item of work. (0.028 cum mtr farm yard Manure for each. pit'.) Rs.1761 for cubic (Tall Plants)
5648
49
277090.88
... More
Conveyance charges for internal transprot upto 100 mt with head load and application of the red soil and FYM into the pit and it including all operational, incidental ,labour charges, required tools, overheads & contractors profit complete for finished item of work. (0.37 cubic per pit and Rs. 50.02 per pit
5648
48
272854.88
... More
Transport of 21''x21'' size bag plants from Nursery to Plantation site including loading and unloading 10 km lead
5648
31
177121.28
... More
Internal transportation of larger bag size 21''x21'' for 100 no. of plants
5648
16
94321.6
... More
Planting of bag plants 21''x21'' size @ 5145.61/100 no.
5648
51
290646.08
... More
Provision for Transportation of Mimosups elangi and Lagerstroemia tree (30kg/bag) (21"x21")
169.44
1000
169440
... More
Jatropha Integerrima (2kgs) (7"x8")
677.76
1000
677760
... More
Maintenance of Palms/Tree planting: Trimming (once in month) and application of fertilizers, insecticides, Fungicides @ 20 gms/pit/sqmt) (once in quarterly) by manually excluding cost of fertilizers, it including all operational, incidental ,labour charges, for complete of work
11296
6
77942.4
... More
Maintenance of hedge/shrub planting: a)Trimming of hedges/shrubs (once in 15 days) it including all operational, incidental, labour charges for complete of work, b) Application of fertilizers, insecticides, fungicides (@20 gms/pit/sqmt) etc., once in month. Based on time motion study, one man-day is worked out for 588 Sqmts or 0.17 man-days for 100 Sqmts. Excluding cost of fertilizers
112960
11
1323891.2
... More
150 waterings for six months . once in day @ 5 litres/per sqm per each time (62128 sqm x150x5/5000)=
9319 trips
9319
691
6441199.61
... More
watch and ward 5 member per 6 months
30
15000
450000
... More
19:19:19 fertilizer 2 times each time 20 gms
138
1800
248400
... More
Hedge / shrub planting: Digging the trench of size 0.15 mtrs. depth, refilling with red garden soil including cost of red garden soil and farmyard manure at 4:1 ratio, internal transportation of plants, planting etc., including the application of fertilizers and pesticides etc., (@ 20 gms/pit/sqmt) and it including all operational, incidental, labour charges, required tools, overheads & contractors profit complete for finished item of work, but excluding the cost of the fertilizers (@ 20 gms/pit/sqmt) and plant material etc., - unit 1 Sqmt of work. (* 6 No./Sqm of plants & bag size shall be arrived based on the spacing 0.40 c/c as per the design.)
(Red garden soil in this context it is defined as sandy loamy garden soil congenial for plant growth which shall be of light textured, crystalline, porous and friable, fertile, slightly acidic or neutral)
56480
335
18935484.8
... More
Cost of Mimosups elangi (21"x21") / Equivalent
2824
390
1101360
... More
cost of Lagerstroemia indica tree (21"x21") / Equivalent
2824
340
960160
... More
cost of Jatropha Integerrima (7"x8") / Equivalent
338880
18
6099840
... More
Foundation and erection charges with special T&P, for 10Mtrs long Octagonal / Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.60Mtr x 0.60Mtrs x 1.40 Mtr size M20 cc work vibrated concreting mixing with necessary steel (15kgs) reinforcement and curing for 7 days as directed by the field engineers during execution including excavation of Earth/BT all labour charges and cost and conveyance of materials etc., complete.
465
8908
4142475.75
... More
Foundation and erection charges with special T&P, for 4 Mtrs long pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.45Mtr x 0.45Mtrs x1.20 Mtr size M20 cc work vibrated concreting mixing with necessary steel (10kgs) reinforcement and curing for 7 days as directed by the field engineers during execution including excavation of Earth/BT all labour charges and cost
and conveyance of materials etc., complete.
1860
6613
12301165.8
... More
Erection charges for Octagonal pole upto 10 mtrs on bridge crashbarrier portion with 4 Nos, 8" Anchor bolts with chemical treatment with suitable "I" type bolts etc duly drilling holes to crash barrier and fixing of "L" type base plate of dimensions 300mmx300mmx12mm at top, side and as stiffner with 4 number of holes at top face and bottom face including bolts, nuts and washers and cost and conveyance of all material and all labour charges etc., complete as directed by the department officers.
12
8482
101790
... More
Fabrication, Transportation and supply of hot-dip galvanized Octagonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with hinged door opening arrangement, including the supply of suitable boards with bakelite sheet as per IS specification suitable to withstand the wind speed of 180 KMPH for 10 Mtrs height Pole having dimensions Bottom 175 mm,. Top 70mm with 3mm thick, base plate 275 x 275 x16mm and 4 Nos of M24 x 750 long 'J' bolts along with template including fabrication, Transportation and supply of 2 Mtr Length double Arm suitable size decorative galvanized bracket with PU paint colour finish etc complete. (The design should be approved from field Engineers).Make for Pole :Bajaj /Valmont /Laasma/ Transrail/Utkarsh/Skipper/Consoul /Surya/Vakrangee/Lysaght Pole
477
37162
17726431.41
... More
Supply, Transporation, installation, testing and commissioning of LED decorative post top of 45W with a system lumen output of 4950 lumens and a minimum system efficiancy of 110lm/W with street light optics. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. the luminaire should have a color temperature of 5700K and CRI70. The luminare shall meet IP66 with THD10% and PF0.9, IK08 protection. The luminaire shall hav eclosed diffused optics with polycarbonate diffuser board. the total power consumption should not exceed 45W (including driver) with glass reinforced polymer (GRP) composite type Conical pole of height 4 mtr including decorative base plate and internal junction box including labour charges etc., complete and as directed by the departmental authorities. Makes:Klite/Phillips/Reytek/lightman or equivalent. Design, model shall be as approved by the departmental authorities
1860
39600
73656000
... More
Supply, transportation and fixing of LED Street light Luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass/polycarbonate diffuser, supply input voltage 120 - 270V AC, P.F 0.90, high power LEDs having System Efficacy = 120 lumens/watt and junction temperature 70°C, with Ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5/Sec-3), driver surge protection 4KV, in-house additional Surge protection 10 KV with optics distribution, THD10% at 110 Volts AC, driver efficiency 90%, CCT: 3000K - 5700K, minimum CRI70, etc., complete with earth connection and not less than two years warranty. a) Luminaire Make : Wipro(Skyline) / Philips (Greenline Extra) / GE- Venture / Crompton(Nexus / Hawk series) / Bajaj (Edge) / Halonix (Modular/ Lumos-Super) / Havells (Endura Series)/Greenlites(HI-Lux) /Capart(Premium)/Polycab/Keselec / HPL(City Vision)/Jaquar (Premium) /Eveready /Surya (Pollux) / Fortune Arrt (Leaf) / Rhino(GPSL06) b) LED MAKE :PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG. - 210W LED Fixture
942
17868
16832070.48
... More
Supply, transportation and fixing of LED Street light Luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass/polycarbonate diffuser, supply input voltage 120 - 270V AC, P.F 0.90, high power LEDs having System Efficacy = 120 lumens/watt and junction temperature 70°C, with Ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5/Sec-3), driver surge protection 4KV, in-house additional Surge protection 10 KV with optics distribution, THD10% at 110 Volts AC, driver efficiency 90%, CCT: 3000K - 5700K, minimum CRI70, etc., complete with earth connection and not less than two years warranty. a) Luminaire Make : Wipro(Skyline) / Philips (Greenline Extra) / GE- Venture / Crompton(Nexus / Hawk series) / Bajaj (Edge) / Halonix (Modular/ Lumos-Super) / Havells (Endura Series)/Greenlites(HI-Lux) /Capart(Premium)/Polycab/Keselec / HPL(City Vision)/Jaquar (Premium) /Eveready /Surya (Pollux) / Fortune Arrt (Leaf) / Rhino(GPSL06) b) LED MAKE :PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG.- 72W LED Fixture
12
5772
69275.88
... More
Supply and fixing of 6-32A 10KA SP MCB, C/D Curve ISI in Octagonal pole with Din channel, with or without insulator terminal strip connector including cost & conveyance of all materials and labour charges etc., complete Makes: Legrand-DX3 / Schneider-A9/Hager-h3/ Siemens-5SX4/ Havells STADx /L&T-AU/Indo Asian-Opti pro/ HPL (Techno)/Anchor (Uno plus).
2814
339
954339.96
... More
Design, Fabrication, assembling, packaging, forwarding to site, installation, testing & commissioning of Outdor type panel with stand enclsoure consisting of 3Ph, , 415V, 50Hz, 3 nos of 200A fuse units, 9 no of 100A fuse units, RYB Indicators for incoming and outgoing phases Al. bus bar, floor mounting free standing totally enclosed compartmentalized front operational, vertical, dust and vermin proof, FRB Shrouding. LT panels fabricated with 2 mm thick for load bearing members, side sheet, removable top & bottom sheets, equipment mounting plate, front door & covers, partition and 3mm HRCA for undrilled gasket removable gland plate and base frame is ISMC -75.The panel shall be painted with texture finish electro static paint SIEMENS GREY RAL -7032 (powder coating).
15
39118
586779
... More
Supply installation, testing and commisision of 21Kva Three Phase Smart Streetlight CCMS Web Controller –Wireless Street light monitoring and controlling system with 63A MCB for incoming and 9 Nos of 20Amps SP MCB with 2 outputs with 1 no of buffer SP MCB of 3 Nos, includes inbuilt RF gateway. It uses GSM/GPRS/4G technology to receive commands and send data from and to the web software with 4G with 2G fall back, Micro HDMI port to be provided. MIPI CSI Camera port to be provided. Minimum of Two USB 3.0 ports to be provided. In-built GPS to be provided It should support GPS/GLONASS/BD, Switching Components, Automatic MCB Trip Rectification for nuisance MCB trips, Controller should have SPD of 20kV/10kA for the Panel. Metering: ISI Energy Meter with Class 1.0 accuracy and Complaint to IS:13779. Ability to communicate securely via cellular networks (GSM / GPRS /2G /3G /4G). Ability to send data regarding energy usage, ON/OFF status etc. from controller. Ability to remotely upgrade the CCMS device firmware from central server. Design Life should be More than 10 years. Inbuild Battery backed with RTC based timer for Bypass operation for up to 8 Hours. Enclosure: CRCA Metal Enclosure with IP65 and IK10 with size of 700x500x145mm CRCA 1.2 thickness with Single Door RAL 7035 Powder coating. Test report: Controller should be type- tested with NABL lab and the test report need to be submitted.Communication Charges per panel per annum included for the warranty period of 2 years,including CCMS Software charges, and Supply of Stand for 3 Phase panel, 6.2 feet height, MS powder coated with 5mm Thick and approved byengineer in charge
16
46300
740800
... More
Supply and laying of 3 core 2.5 Sqmm ISI marked, PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990..Makes: Finolex / RR kabel / Havells/ Finecab /KEI/Polycab/ Gloster/ Goldmedal/GM// Fortune Arrt/Anchor /Million
21225
171
3640724.25
... More
Supply transportation and laying of 16 Sqmm 4 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / Finecab / KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt
16018
259
4151064.7
... More
Supply transportation and laying of 10 Sqmm 4 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / Finecab / KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt
35332
225
7952173.24
... More
Supply transportation and laying of 35 Sqmm 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / Finecab / KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt
1600
377
603696
... More
Supply transportation and laying of 50 Sqmm 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / Finecab / KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt
300
489
146937
... More
Supply and Transportation and laying of Outer dia 63 mm and Inner dia 51mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Makes:DURA LINE (Dura Guard) or its equivalent make and as directed by the Engineer in Charge
52950
174
9264661.5
... More
Earth work excavation of Trench of size in all types of soils for covering of UG cables/HDPE pipe and refilling of Trench.
9531
395
3768366.78
... More
Providing independent earthing by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters.
31
4763
147679.04
... More
Supply and making end termination with heavy Alluminium lugs (pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape etc of up to 16 sqmm.Makes:Dowels/Jainson/Comet.
22512
13
306838.56
... More
Supply and making end termination with heavy Alluminium lugs (pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape etc of 35 sqmmMakes:Dowels/Jainson/Comet
248
27
6762.96
... More
Supply and making end termination with heavy Alluminium lugs (pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape etc of 50 sqmmMakes:Dowels/Jainson/Comet
120
35
4226.4
... More
Supply and laying of 8 SWG GI wire(0.104Kgs/1Mtr) Earth wire/Strip in horizontal run in Ground including,revitting,soldering,saddles,making connection etc as required
52950
11
601512
... More
Supply and laying of 25mm x 6mm GI Flat (1.18Kgs/1Mtr) Earth Strip in horizontal run in Ground including, revitting,soldering,saddles,making connection etc as required
62
110
6833.02
... More
Clearing and grubbing road land / pavement layers including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm by mechanical means in areas of non thorny jungle(light jungle), removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 of MORTH (5th Revision) including Contractors profit and Overhead charges for finished items of work and as directed by Engineers-in-charge
30.65
38840
1190455.81
... More
Dismantling Bituminous layers of Flexible Pavement by Mechanical means and disposal of dismantled material upto a lead of 1000 metres, stacking serviceable and unserviceable materials separately complete as per Technical Specification Clause 201 of MORTH (5th Revision) including Contractors profit and Overhead charges for finished items of work and as directed by Engineers-in-charge
12708.55
523
6648732.1
... More
Dismantling Granular Layers of Flexible Pavement by Mechanical means and disposal of dismantled material upto a lead of 1000 metres, stacking serviceable and unserviceable materials separately complete as per Technical Specification Clause 201 of MORTH (5th Revision) including Contractors profit and Overhead charges for finished items of work and as directed by Engineers-in-charge
44922.35
523
23502025.85
... More
Cleaning of reinforcement from rust from the reinforcement bars to give it as total rust free steel surface by using alkaline rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry,all complete as per direction of Engineer in charge
100
14
1495
... More
Specialised Injection Grouting with Cement and Free Flow Additives includes Drilling of holes with power drilling machine to the required depth [12mm to 14mm dia holes], Fixing of Rubber Nozzles with cement and quick setting, Rapid hardening compound putty - Rapidstrong qs or equivalent.Grouting of holes with 140 PSI Grout pump with cement slurry mixing with Specialized Free flow, Non-shrink Grout additive - 250 Grams per bag of 50 Kgs Cement add required water to make slurry form.After completion of grouting, Remove the Rubber nozzles e]. Later sealing of the hole with polymer cement putty .
100
196
19655
... More
Providing, cutting, bending and fixing in position of HYSD bars of Fe-500 D grade reinforcement for repair works in reinforced concrete structures complete as per drawing, Technical Specifications Section 1600 (5th Revision) and as directed by the Engineer in Charge
0.5
79446
39723.15
... More
Dismantling of RCC / PSC structures by Mechanical means, including T&P and scaffolding wherever necessary, sorting the dismantled materail, disposal of unserviceble materail and stacking the serviceable material with all lifts and lead of 1000 meters complete as per MORTH Technical Specifications 202 (5th Revision) and as directed by the Engineer in Charge
631
2677
1689628.7
... More
Forming Temporary bund with Excavated material by mechanical means up to SDR with all leads and lifts including conveyance of soil, depositing the soil on the embankment, spreading soil, breaking clods, sectioning, grading and consolidation with 8 to 10 Tonnes Vibratory Road Roller @ OMC to meet requirement of table 300-1 & 300-2 of MoRT&H, including all hire and operational charges of T&P complete for finished item of work as per MoRT&H specification 305 (5th Revision) including Contractors profit and Overhead charges and as directed by Engineers-in-charge
25062.52
178
4468647.32
... More
Construction of Granular sub-base by providing HBG material confirming to Grading - III of MoRT&H Table 400-1 including cost and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavator / approved means at OMC and compacting with vibratory roller to achieve the desired density etc., complete for finished item of work as per MoRT&H Specification 401 (5th revision) and as directed by the Engineer-in-charge.
12460.2
2079
25913477.94
... More
Supply and transportation of the Biaxial Geo-grid of specification 100 Kn/m including laying in position at site as per MORT&H 5th Revision
26967.6
155
4179978
... More
Supply and transportation of the Biaxial Geo-textile of specification 250 GSM including laying in position at site as per MORT&H 5th Revision
6104
152
930127.52
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH 0-3m
29365.56
133
3928230.96
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH 3-6m Including Dewatering
55139.19
160
8825027.36
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH 6m Including Dewatering
1848.51
197
365413.46
... More
Vibrated cement concrete M 15 Grade Concrete as levelling coarse using 40mm , 20mm and 10mm size HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed and compacted by vibration including curing for 14 days including cost, and conveyance of all materials to site and all labour charges ,centering, machine mixing, laying in position, Compacting , Vibrating and curing including all other incidental and all other operational charges of T&P required etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MoRTH .Minimum quantity of 275 kg cement to be used per cum of concrete.
2324.84
5224
12146010.34
... More
Vibrated reinforced cement concrete M 30 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, Centering,laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution and excluding cost of steel and its fabrication charges for finished item per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH and as directed by the Engineer-in-Chargei) Drain Raft concrete M-30 grade including form work. Minimum quantity of 407 kg cement to be used per cum of concrete.
6227.12
5499
34246544.61
... More
Vibrated reinforced cement concrete M 30 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, Centering,laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution and excluding cost of steel and its fabrication charges for finished item per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH and as directed by the Engineer-in-Chargeii) Drain Side Walls concrete M-30 grade excluding formwork. Minimum quantity of 407 kg cement to be used per cum of concrete.
13320.41
5315
70799177.99
... More
Vibrated reinforced cement concrete M 30 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, Centering,laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution and excluding cost of steel and its fabrication charges for finished item per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH and as directed by the Engineer-in-Chargeiii) Drain Slab concrete M-30 grade including formwork. Minimum quantity of 407 kg cement to be used per cum of concrete.
6378.46
5842
37264239.01
... More
Form work for Drain side walls including cost & conveyance of all materials to site and labour charges, other incidental hire and operational charges of all T&P etc., complete as per approved drawings etc., complete and as directed by Engineer-in-charge
82936.01
568
47114288.56
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., complete and as directed by the Engineer in Charge.
2163.03
91446
197800506.27
... More
Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia PVC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing face. Complete as per drawing and technical specification Clauses 614, 709, 1204.3.7 MORD / 2706 & 2200 MORTH.
22677.14
236
5354753.07
... More
Supply and Laying of a geotextile 200 gsm between pitching and embankment slopes on which pitching is laid to prevent escape of the embankment material through the voids of the stone pitching/cement concrete blocks as well as to allow free movement of water without creating any uplift head on the pitching as per Tech Specifications in Section 700 & 2504 MORTH.
4679.2
189
885257.85
... More
Supply & Fixing of 20mm thick Compressible Fiber board joint filler in expansion joint complete as per drawing, Technical Specifications Section 2604 (5th Revision) and as directed by the Engineer in Charge
465.48
696
324188.2
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) and as per latest revisions and specifications and as directed by the Engineer - in - charge.
72259.49
481
34760427.66
... More
Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery of manhole covers and frames of H.D.-20 with 500 mm dia. Clear opening with ISI marking anywhere in A.P., F.O.R. destination including, loading, unloading & stacking etc., as applicable.
1630.4
2259
3684540.96
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete
258465.05
115
29757081.21
... More
Manufacture as per company’s standard specification supply and delivery of encapsulated plastic steps for man holes anywhere in A.P. including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work etc, complete
18021
188
3398760.6
... More
Providing and laying boulder apron for bed protection with stone boulders of minimum size and weight as per Table 1300.1, no fragment weighing less than 25 / 40 kg laid dry complete as per drawing and technical specifications Clause 1301 MORD / 2503 MORTH
254.55
2089
531889.86
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHa) 0.0 m To 3.0 m Depth
81144.41
133
10854687.73
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHb) 3.0 m To 6.0 m Depth (including dewatering)
23.42
160
3748.37
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
49642.55
481
23880548.68
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete and as directed by Engineer-in-charge
58917.73
115
6783198.25
... More
Vibrated reinforced cement concrete M 20 grade with batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed and compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MoRTH (5th revision ) and as directed by the Engineer-in-ChargeFor Pipe Encasement
1716.51
5038
8648429.65
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) /(Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying complete and as directed by the Engineer in Charge.
68.66
91446
6278684.42
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc complete and as directed by Engineer-in-charge.150mm Dia DI-K7 Pipes
51.9
2000
103846.19
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc complete and as directed by Engineer-in-charge.200mm Dia DI-K7 Pipes
196
2650
519515.64
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc complete and as directed by Engineer-in-charge.250mm Dia DI-K7 Pipes
729.5
3521
2568664.34
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc complete and as directed by Engineer-in-charge.300mm Dia DI-K7 Pipes
1081
4542
4910042.53
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc complete and as directed by Engineer-in-charge.400mm Dia DI-K7 Pipes
827
6906
5711981.49
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc complete and as directed by Engineer-in-charge.450mm Dia DI-K7 Pipes
101
8350
843354.04
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc complete and as directed by Engineer-in-charge.500mm Dia DI-K7 Pipes
611
9851
6018997.66
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc complete and as directed by Engineer-in-charge.600mm Dia DI-K7 Pipes
760.7
13240
10072375.45
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc complete and as directed by Engineer-in-charge.500mm Dia DI K9 pipes
135
11405
1539749.25
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc complete and as directed by Engineer-in-charge.600mm Dia DI K9 pipes
121.5
15176
1843910.73
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc complete and as directed by Engineer-in-charge.700mm Dia DI K9 pipes
1311
19374
25399759.74
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc complete and as directed by Engineer-in-charge.900mm Dia DI K9 pipes
403
30112
12135264.96
... More
Supply & Delivery of Centrifugal Cast (spun) Ductile Iron fittings conforming to IS: 9523/2000 having dimensions as per BIS, with zinc coating externally and inside mortar lining (with finishing as per clause 13/IS9523/2000) including transportation to site of work , lowering carefully into trench and laying them true to alignment and gradient ((Reference to specifications. BIS No.3114/94) etc complete Below 500mm Dia
4119
154
634408.38
... More
Supply & Delivery of Centrifugal Cast (spun) Ductile Iron fittings conforming to IS: 9523/2000 having dimensions as per BIS, with zinc coating externally and inside mortar lining (with finishing as per clause 13/IS9523/2000) including transportation to site of work , lowering carefully into trench and laying them true to alignment and gradient ((Reference to specifications. BIS No.3114/94) etc complete Above 500mm Dia
20652
169
3507122.64
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc complete and as directed by Engineer-in-charge150mm Dia
725
108
78568.25
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc complete and as directed by Engineer-in-charge200mm Dia
196
157
30879.8
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc complete and as directed by Engineer-in-charge250mm Dia
1020
212
217117.2
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc complete and as directed by Engineer-in-charge300mm Dia
1081
275
297610.11
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc complete and as directed by Engineer-in-charge350mm Dia
50
345
17265.5
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc complete and as directed by Engineer-in-charge400mm Dia
827
421
348522.61
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc complete and as directed by Engineer-in-charge450mm Dia
101
509
51490.81
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc complete and as directed by Engineer-in-charge500mm Dia
830
594
493269
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc complete and as directed by Engineer-in-charge600mm Dia
1024
793
812523.52
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc complete and as directed by Engineer-in-charge700mm Dia
1269
1023
1299062.61
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc complete and as directed by Engineer-in-charge800mm Dia
1621
1281
2076906.25
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc complete and as directed by Engineer-in-charge900mm Dia
596
1557
928317.68
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc complete and as directed by Engineer-in-charge1000mm Dia
403
1878
756995.2
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc complete and as directed by Engineer-in-charge150mm Dia
132
217
28728.48
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc complete and as directed by Engineer-in-charge200mm Dia
36
236
8512.56
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc complete and as directed by Engineer-in-charge250mm Dia
185
266
49302.5
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc complete and as directed by Engineer-in-charge300mm Dia
197
303
59730.4
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc complete and as directed by Engineer-in-charge350mm Dia
9
359
3236.94
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc complete and as directed by Engineer-in-charge400mm Dia
150
388
58261.5
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc complete and as directed by Engineer-in-charge450mm Dia
18
445
8020.26
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc complete and as directed by Engineer-in-charge500mm Dia
151
483
73016.05
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc complete and as directed by Engineer-in-charge600mm Dia
186
559
104072.58
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc complete and as directed by Engineer-in-charge700mm Dia
231
635
146802.81
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc complete and as directed by Engineer-in-charge800mm Dia
295
1117
329798.2
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc complete and as directed by Engineer-in-charge900mm Dia
108
1289
139216.32
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc complete and as directed by Engineer-in-charge1000mm Dia
73
1411
103062.13
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete 150mm Dia
132
115
15297.48
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete 200mm Dia
36
139
5031
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete 250mm Dia
185
156
29006.15
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete 300mm Dia
197
238
47002.23
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete 350mm Dia
9
302
2719.98
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete 400mm Dia
150
334
50104.5
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete 450mm Dia
18
390
7035.12
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete 500mm Dia
151
543
82005.08
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete 600mm Dia
186
686
127638.78
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete 700mm Dia
231
912
210748.23
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete 800mm Dia
295
1289
380411.35
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete 900mm Dia
108
1556
168105.24
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete 1000mm Dia
73
1701
124242.35
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete ii) 11.25º to 45º Bend150mm Dia
6
115
695.34
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete ii) 11.25º to 45º Bend200mm Dia
8
139
1118
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete ii) 11.25º to 45º Bend250mm Dia
10
156
1567.9
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete ii) 11.25º to 45º Bend300mm Dia
4
238
954.36
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete ii) 11.25º to 45º Bend350mm Dia
4
302
1208.88
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete ii) 11.25º to 45º Bend400mm Dia
2
334
668.06
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete ii) 11.25º to 45º Bend500mm Dia
18
543
9775.44
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete ii) 11.25º to 45º Bend600mm Dia
30
686
20586.9
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete ii) 11.25º to 45º Bend700mm Dia
8
912
7298.64
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete ii) 11.25º to 45º Bend800mm Dia
10
1289
12895.3
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete ii) 11.25º to 45º Bend900mm Dia
6
1556
9339.18
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete ii) 11.25º to 45º Bend1000mm Dia
4
1701
6807.8
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete iii) 45º to 90º Bend200mm Dia
6
139
838.5
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete iii) 45º to 90º Bend250mm Dia
2
156
313.58
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete iii) 45º to 90º Bend400mm Dia
2
334
668.06
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete iii) 45º to 90º Bend500mm Dia
4
543
2172.32
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete iii) 45º to 90º Bend600mm Dia
14
686
9607.22
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Pipe Network300 X 300 X 150mm Dia
3
238
715.77
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Pipe Network300 X 300 X 300mm Dia
3
238
715.77
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Pipe Network500 X 500 X 500mm Dia
9
543
4887.72
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Pipe Network600 X 600 X 200mm Dia
3
686
2058.69
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Pipe Network600 X 600 X 400mm Dia
3
686
2058.69
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Pipe Network600 X 600 X 600mm Dia
12
686
8234.76
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Pipe Network700 X 700 X 700mm Dia
3
912
2736.99
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Pipe Network800 X 800 X 600mm Dia
6
1289
7737.18
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Pipe Network900 X 900 X 600mm Dia
3
1556
4669.59
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete 1000 X 1000 X 600mm Dia
3
1701
5105.85
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Scour Valves900 X 900 X 200mm Dia
3
1556
4669.59
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Scour Valves1000 X 1000 X 200mm Dia
3
1701
5105.85
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete 700 X 700 X 150mm Dia
6
912
5473.98
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete 700 X 700 X 300mm Dia
9
912
8210.97
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Reducers200 X 150mm Dia
2
139
279.5
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Reducers300 X 150mm Dia
2
238
477.18
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Reducers300 X 250mm Dia
2
238
477.18
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Reducers400 X 250mm Dia
2
334
668.06
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Reducers400 X 300mm Dia
2
334
668.06
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Reducers500 X 200mm Dia
2
543
1086.16
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Reducers500 X 300mm Dia
2
543
1086.16
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Reducers500 X 350mm Dia
2
543
1086.16
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Reducers500 X 400mm Dia
2
543
1086.16
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Reducers500 X 450mm Dia
2
543
1086.16
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Reducers600 X 250mm Dia
2
686
1372.46
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Reducers600 X 300mm Dia
2
686
1372.46
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Reducers600 X 400mm Dia
6
686
4117.38
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Reducers600 X 500mm Dia
6
686
4117.38
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Reducers700 X 500mm Dia
2
912
1824.66
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Reducers800 X 700mm Dia
2
1289
2579.06
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Reducers900 X 700mm Dia
2
1556
3113.06
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Reducers1000 X 800mm Dia
2
1701
3403.9
... More
Manufacture, supply and delivery of M.S Spirally Welded Pipes conforming to IS: 3589/2001 including in lining with cement mortar (1:2) 15mm thick using 4 numbers of 6mm dia. M.S. Rings at each end of the pipe and out coating with cement mortar (1:3) 30mm thick by short crating or guniting duly providing wire mesh of size 50x50x3mm including cost of all materials, labor charges, transportation to anywhere in AP. For Crossings1800mm dia MS Pipe 14mm thickmm Dia
120
52024
6242917.2
... More
Cost of Laying, Jointing, Hydrostatic Filed Test Pressure, Including Cost of Site Welding, Jointing Materials And Cost of Transportation of Water Including Emptying Pipe Line After Completion Of Field Testing1800mm dia MS Pipe 14mm thickmm Dia
140
6879
963114.6
... More
Manufacture, supply and delivery of M.S Spirally Welded Pipes conforming to IS: 3589/2001 including in lining with cement mortar (1:2) 15mm thick using 4 numbers of 6mm dia. M.S. Rings at each end of the pipe and out coating with cement mortar (1:3) 30mm thick by short crating or guniting duly providing wire mesh of size 50x50x3mm including cost of all materials, labor charges, transportation to anywhere in AP. For Crossings1900mm dia MS Pipe 14mm thickmm Dia
50
54638
2731912
... More
Cost of Laying, Jointing, Hydrostatic Filed Test Pressure, Including Cost of Site Welding, Jointing Materials And Cost of Transportation of Water Including Emptying Pipe Line After Completion Of Field Testing1900mm dia MS Pipe 14mm thickmm Dia
50
8016
400833.5
... More
Manufacture, supply and delivery of submerged ARC welded M.S Pipe having beveled ends from plate or coil conforming to IS-3589 and/or IS-5504 with its latest revision / amendment with inside 406 micron thick food grade epoxy coating and outside 3LPE coating conforming to DIN 30670 for the specified thickness & inner diameter of pipe, external field joint coating with polyolefin backing and internal field joint coating with chemically cured 2 part epoxy based solvent free liquid coating material for Drinking Water NSF approved etc., complete including all labour, materials and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge including transportation1600mm Dia
3619.88
47155
170696237.77
... More
Cost of Laying, Jointing, Hydrostatic Filed Test Pressure, Including Cost of Site Welding, Jointing Materials And Cost of Transportation of Water Including Emptying Pipe Line After Completion Of Field Testing1600mm Dia
4871
5751
28014046.49
... More
Fabrication of Mild Steel bends as per IS: 7322 with three run arc welding using MS plate of required thickness as per specification drawings and as directed by deptl officers including inlining chemically cured 2 part epoxy based solvent free liquid coating material for Drinking Water NSF approved and outcoating with Polyolefin tape coating/heat shrink sleeves incl cost of M.S.Plates, welding rods and all other required materials, inclusive of all taxes and duties and delivery of fabricated inlined and outcoated bends to site, and hoisting, carefully lowering into readymade trenches and laying true to alignment and gradient and perfect lining by jacking and jointing with three run arc welding and inlining and outcoating field welded joints as per the above specification including cost of all jointing materials, cost of necessary testing equipment, labour charges and factory and field hydraulic testing to the required pressure etc., complete ii) 30º to 60º Bend1600 X 1600mm Dia
39698.58
39
1578812.53
... More
Fabrication of Mild Steel bends as per IS: 7322 with three run arc welding using MS plate of required thickness as per specification drawings and as directed by deptl officers including inlining chemically cured 2 part epoxy based solvent free liquid coating material for Drinking Water NSF approved and outcoating with Polyolefin tape coating/heat shrink sleeves incl cost of M.S.Plates, welding rods and all other required materials, inclusive of all taxes and duties and delivery of fabricated inlined and outcoated bends to site, and hoisting, carefully lowering into readymade trenches and laying true to alignment and gradient and perfect lining by jacking and jointing with three run arc welding and inlining and outcoating field welded joints as per the above specification including cost of all jointing materials, cost of necessary testing equipment, labour charges and factory and field hydraulic testing to the required pressure etc., complete ii) 30º to 60º Bend1800 X 1800mm Dia
7265.12
39
288933.82
... More
Fabrication of Mild Steel bends as per IS: 7322 with three run arc welding using MS plate of required thickness as per specification drawings and as directed by deptl officers including inlining chemically cured 2 part epoxy based solvent free liquid coating material for Drinking Water NSF approved and outcoating with Polyolefin tape coating/heat shrink sleeves incl cost of M.S.Plates, welding rods and all other required materials, inclusive of all taxes and duties and delivery of fabricated inlined and outcoated bends to site, and hoisting, carefully lowering into readymade trenches and laying true to alignment and gradient and perfect lining by jacking and jointing with three run arc welding and inlining and outcoating field welded joints as per the above specification including cost of all jointing materials, cost of necessary testing equipment, labour charges and factory and field hydraulic testing to the required pressure etc., complete 2000 X 900mm Dia
10382.55
39
412914.01
... More
Fabrication of Mild Steel bends as per IS: 7322 with three run arc welding using MS plate of required thickness as per specification drawings and as directed by deptl officers including inlining chemically cured 2 part epoxy based solvent free liquid coating material for Drinking Water NSF approved and outcoating with Polyolefin tape coating/heat shrink sleeves incl cost of M.S.Plates, welding rods and all other required materials, inclusive of all taxes and duties and delivery of fabricated inlined and outcoated bends to site, and hoisting, carefully lowering into readymade trenches and laying true to alignment and gradient and perfect lining by jacking and jointing with three run arc welding and inlining and outcoating field welded joints as per the above specification including cost of all jointing materials, cost of necessary testing equipment, labour charges and factory and field hydraulic testing to the required pressure etc., complete 2000 X 1600mm Dia
7629.38
39
303420.44
... More
Fabrication of Mild steel Tees using specified thickness for 2.0 m long main and 1.0 m long with 20 mm thick MS flange with three run arc welding as per specification drawings including chemically cured 2 part epoxy based solvent free liquid coating material for Drinking Water NSF approved and outcoating with Visco elastic (non-crystalline/crystalline as per ISO 21809-3-2016 type 13A-1 and 13B-1) including cost of M.S. plates, welding rods and all other required materials, all taxes and duties, fabrication charges and transportation to site and hoisting carefully lowering into readymade trenches or keeping in position on pedastals or supports and laying true to alingment and gradient and perfect lining by jacking and jointing with three run arc welding and providing inlining and outcoating field welded joints including cost of ur charges etc., complete for finished item of work, including factory field hydraulic testing to 24/16 Kg/Sqcm pressure respectively.2000 x 2000 x 800mm Dia
9438.67
39
375375.91
... More
Fabrication of Mild steel Tees using specified thickness for 2.0 m long main and 1.0 m long with 20 mm thick MS flange with three run arc welding as per specification drawings including chemically cured 2 part epoxy based solvent free liquid coating material for Drinking Water NSF approved and outcoating with Visco elastic (non-crystalline/crystalline as per ISO 21809-3-2016 type 13A-1 and 13B-1) including cost of M.S. plates, welding rods and all other required materials, all taxes and duties, fabrication charges and transportation to site and hoisting carefully lowering into readymade trenches or keeping in position on pedastals or supports and laying true to alingment and gradient and perfect lining by jacking and jointing with three run arc welding and providing inlining and outcoating field welded joints including cost of ur charges etc., complete for finished item of work, including factory field hydraulic testing to 24/16 Kg/Sqcm pressure respectively.1600 x 1600 x 600mm Dia
5831.1
39
231902.85
... More
Fabrication of Mild steel Tees using specified thickness for 2.0 m long main and 1.0 m long with 20 mm thick MS flange with three run arc welding as per specification drawings including chemically cured 2 part epoxy based solvent free liquid coating material for Drinking Water NSF approved and outcoating with Visco elastic (non-crystalline/crystalline as per ISO 21809-3-2016 type 13A-1 and 13B-1) including cost of M.S. plates, welding rods and all other required materials, all taxes and duties, fabrication charges and transportation to site and hoisting carefully lowering into readymade trenches or keeping in position on pedastals or supports and laying true to alingment and gradient and perfect lining by jacking and jointing with three run arc welding and providing inlining and outcoating field welded joints including cost of ur charges etc., complete for finished item of work, including factory field hydraulic testing to 24/16 Kg/Sqcm pressure respectively.1900 x 1900 x 900mm Dia
3467.89
39
137917.99
... More
Fabrication of Mild steel Tees using specified thickness for 2.0 m long main and 1.0 m long with 20 mm thick MS flange with three run arc welding as per specification drawings including chemically cured 2 part epoxy based solvent free liquid coating material for Drinking Water NSF approved and outcoating with Visco elastic (non-crystalline/crystalline as per ISO 21809-3-2016 type 13A-1 and 13B-1) including cost of M.S. plates, welding rods and all other required materials, all taxes and duties, fabrication charges and transportation to site and hoisting carefully lowering into readymade trenches or keeping in position on pedastals or supports and laying true to alingment and gradient and perfect lining by jacking and jointing with three run arc welding and providing inlining and outcoating field welded joints including cost of ur charges etc., complete for finished item of work, including factory field hydraulic testing to 24/16 Kg/Sqcm pressure respectively.1600 X 1600 X 200mm Dia
47326.99
39
1882194.39
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with flanged Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc complete and as directed by Engineer-in-chargeFor Air Valves200mm Dia
10
9579
95799.4
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with flanged Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc complete and as directed by Engineer-in-chargeFor Scour Valves (3No of 1m length)200mm Dia
6
9579
57479.64
... More
Manufacture, Supply and delivery of DI D/F Sluice Valves PN-16 with GGG40/SG 400/12 or Equivalent grade as per I.S.3896-part 2-1985 and subsequent revisions, Double eccentrically Disc., with renewable soft seal on the disc and Body seat face of stainless steel/nickel weld overlay with powder or liquid Epoxy coating with minimum thickness of 250 microns applied on both body and disc inside and outside. Face to face dimensions as per AWWA C 504:80 or BS 5155 or IS:13095. Drilled as per IS:1538 inclusive transportation to work site, loading, unloading complete for finished item of work etc., complete 300mm Dia Sluice Valve
2
85513
171027.16
... More
Manufacture, Supply and delivery of DI D/F Sluice Valves PN-16 with GGG40/SG 400/12 or Equivalent grade as per I.S.3896-part 2-1985 and subsequent revisions, Double eccentrically Disc., with renewable soft seal on the disc and Body seat face of stainless steel/nickel weld overlay with powder or liquid Epoxy coating with minimum thickness of 250 microns applied on both body and disc inside and outside. Face to face dimensions as per AWWA C 504:80 or BS 5155 or IS:13095. Drilled as per IS:1538 inclusive transportation to work site, loading, unloading complete for finished item of work etc., complete 500mm Dia Sluice Valve
1
314612
314612.72
... More
Manufacture, Supply and delivery of DI D/F Sluice Valves PN-16 with GGG40/SG 400/12 or Equivalent grade as per I.S.3896-part 2-1985 and subsequent revisions, Double eccentrically Disc., with renewable soft seal on the disc and Body seat face of stainless steel/nickel weld overlay with powder or liquid Epoxy coating with minimum thickness of 250 microns applied on both body and disc inside and outside. Face to face dimensions as per AWWA C 504:80 or BS 5155 or IS:13095. Drilled as per IS:1538 inclusive transportation to work site, loading, unloading complete for finished item of work etc., complete 700mm Dia Sluice Valve
1
775541
775541.67
... More
Manufacture, Supply and delivery of DI D/F Sluice Valves PN-16 with GGG40/SG 400/12 or Equivalent grade as per I.S.3896-part 2-1985 and subsequent revisions, Double eccentrically Disc., with renewable soft seal on the disc and Body seat face of stainless steel/nickel weld overlay with powder or liquid Epoxy coating with minimum thickness of 250 microns applied on both body and disc inside and outside. Face to face dimensions as per AWWA C 504:80 or BS 5155 or IS:13095. Drilled as per IS:1538 inclusive transportation to work site, loading, unloading complete for finished item of work etc., complete 800mm Dia Sluice Valve
1
1005185
1005185.99
... More
Manufacture, Supply and delivery of DI D/F Sluice Valves PN-16 with GGG40/SG 400/12 or Equivalent grade as per I.S.3896-part 2-1985 and subsequent revisions, Double eccentrically Disc., with renewable soft seal on the disc and Body seat face of stainless steel/nickel weld overlay with powder or liquid Epoxy coating with minimum thickness of 250 microns applied on both body and disc inside and outside. Face to face dimensions as per AWWA C 504:80 or BS 5155 or IS:13095. Drilled as per IS:1538 inclusive transportation to work site, loading, unloading complete for finished item of work etc., complete 900mm Dia Sluice Valve
1
1305363
1305363.92
... More
Manufacture, Supply and delivery of DI D/F Sluice Valves PN-16 with GGG40/SG 400/12 or Equivalent grade as per I.S.3896-part 2-1985 and subsequent revisions, Double eccentrically Disc., with renewable soft seal on the disc and Body seat face of stainless steel/nickel weld overlay with powder or liquid Epoxy coating with minimum thickness of 250 microns applied on both body and disc inside and outside. Face to face dimensions as per AWWA C 504:80 or BS 5155 or IS:13095. Drilled as per IS:1538 inclusive transportation to work site, loading, unloading complete for finished item of work etc., complete 1000mm Dia Sluice Valve
1
2125522
2125522.2
... More
Lowering, keeping in position and fixing DI D/F Valves excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces 300mm Dia Valve
2
815
1631.5
... More
Lowering, keeping in position and fixing DI D/F Valves excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces 500mm Dia Valve
1
2563
2563.96
... More
Lowering, keeping in position and fixing DI D/F Valves excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces 700mm Dia Valve
1
4766
4766.02
... More
Lowering, keeping in position and fixing DI D/F Valves excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces 800mm Dia Valve
1
5406
5406.51
... More
Lowering, keeping in position and fixing DI D/F Valves excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces 900mm Dia Valve
1
7093
7093.36
... More
Lowering, keeping in position and fixing DI D/F Valves excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces 1000mm Dia Valve
1
7723
7723.47
... More
Jointing DI D/F Valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994.)Sluice valves300mm Dia Valve
2
926
1852.72
... More
Jointing DI D/F Valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994.)Sluice valves500mm Dia Valve
1
2708
2708.48
... More
Jointing DI D/F Valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994.)Sluice valves700mm Dia Valve
1
4721
4721.36
... More
Jointing DI D/F Valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994.)Sluice valves800mm Dia Valve
1
5475
5475.56
... More
Jointing DI D/F Valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994.)Sluice valves900mm Dia Valve
1
6229
6229.75
... More
Jointing DI D/F Valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994.)Sluice valves1000mm Dia Valve
1
6983
6983.95
... More
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including transportation etc., for finished item of workPN-16 Mpa Without Bypass200mm Dia Scour Valve
1
35758
35758.9
... More
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including transportation etc., for finished item of workPN-16 Mpa Without Bypass200mm Dia Scour Valve
1
35758
35758.9
... More
Lowering, keeping in position and fixing DI Gate valves (with cap / with hand wheel & reflex valves) excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces 200mm Dia Scour Valve
1
403
403.19
... More
Lowering, keeping in position and fixing DI Gate valves (with cap / with hand wheel & reflex valves) excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces 200mm Dia Scour Valve
1
403
403.19
... More
Jointing DI gate valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994.) 200mm Dia Scour Valve
1
627
627.71
... More
Jointing DI gate valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994.) 200mm Dia Scour Valve
1
627
627.71
... More
Design, Supply, Erection and Commissioning of Air Management System having Efficient Air Release , Isolation Wafer Type Butterfly Valve, Tamperproof Enclosure System with Vandalized Alert and Burst Monitoring by pressure monitoring at Air Valve locations. The System will also capable of operating as flush valve in the event of requirement of drawing the water for fire incidents etc.200mm Dia Air Valve
2
260000
520000
... More
Design, Supply, Erection and Commissioning of Air Management System having Efficient Air Release , Isolation Wafer Type Butterfly Valve, Tamperproof Enclosure System with Vandalized Alert and Burst Monitoring by pressure monitoring at Air Valve locations. The System will also capable of operating as flush valve in the event of requirement of drawing the water for fire incidents etc.200mm Dia Air Valve
3
260000
780000
... More
Supply delivery and laying of Accessories like 40mm Push Fit Couplers, 40mm End Plugs & 40mm Simple Plugs for Smooth Wall 40mm outer dia and 33mm inner dia Permanently Lubricated HDPE Telecom Duct etc., complete and as directed by Engineer-in-charge
9225
55
507375
... More
Supply delivery and laying of Accessories like 40mm Push Fit Couplers, 40mm End Plugs & 40mm Simple Plugs for Smooth Wall 40mm outer dia and 33mm inner dia Permanently Lubricated HDPE Telecom Duct etc., complete and as directed by Engineer-in-charge
26
140
3640
... More
Vibrated reinforced cement concrete M 25 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 403 kgs)Note : The rate shall be adjusted as per the approved design mix by the competent authority For Valve Chambersa) Raft
19.84
5495
109027.55
... More
Vibrated reinforced cement concrete M 25 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 403 kgs)Note : The rate shall be adjusted as per the approved design mix by the competent authority b) Walls-150mm thick
34.62
12872
445650.8
... More
Vibrated reinforced cement concrete M 25 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 403 kgs)Note : The rate shall be adjusted as per the approved design mix by the competent authority c) Slab
7.41
5823
43153.91
... More
Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery and Fixing of Heavy Duty manhole covers and frames - 24x24 HD 20 with ISI marking anywhere in A.P., F.O.R. destination including, loading, unloading & stacking at site etc., complete
28
2147
60124.96
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm hard granite machine crushed metal mechanically mixed , compacted by vibration including curing for 14 days including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawings and technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MORTH and directed by the departmental officers for PCC Bedding of Pipe Encasing, Valve Chambers & Thrustblocks
293.93
5052
1485040.17
... More
Vibrated reinforced cement concrete M 25 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 403 kgs)Note : The rate shall be adjusted as per the approved design mix by the competent authority For Thrustblocks
441.66
5495
2427071.86
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) /(Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying complete and as directed by the Engineer in Charge. for Valve Chambers & Thrustblocks
8.66
91446
791922.62
... More
Manufacturing, Supply, Delivery of Double chambered restrained joint DI K9 Pipes confirming to IS 8329 (restrained joints are designed and tested as per ISO 10804) (to be used to for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985 /8329-2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specials150mm Dia
11
2733
30069.38
... More
Manufacturing, Supply, Delivery of Double chambered restrained joint DI K9 Pipes confirming to IS 8329 (restrained joints are designed and tested as per ISO 10804) (to be used to for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985 /8329-2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specials350mm Dia
11
7129
78422.74
... More
Manufacturing, Supply, Delivery of Double chambered restrained joint DI K9 Pipes confirming to IS 8329 (restrained joints are designed and tested as per ISO 10804) (to be used to for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985 /8329-2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specials600mm Dia
11
16582
182403.21
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994)150mm Dia
11
108
1192.07
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994)350mm Dia
11
345
3798.41
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994)600mm Dia
11
793
8728.28
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.)150mm Dia
2
217
435.28
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.)350mm Dia
2
359
719.32
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.)600mm Dia
2
559
1119.06
... More
Manufacture, Supplying and fitting Ductile Iron Double Chambered Restrained Joint fittings confirming to IS 9523 : 2000 (restrained joints are designed and tested as per ISO 10804) of Class K-12 (Alternative and to avoid concrete thrust blocks along with minimum length of Restrained joint DI pipes at bends) including rubber gasket confirming to IS 5382 : 1985 and locking bars & rubber gaskets etc complete but excluding TaxesDuctile Iron Double Chambered Restrained Joint
fittingsFittings upto 500mm dia
500
366
183490
... More
Manufacture, Supplying and fitting Ductile Iron Double Chambered Restrained Joint fittings confirming to IS 9523 : 2000 (restrained joints are designed and tested as per ISO 10804) of Class K-12 (Alternative and to avoid concrete thrust blocks along with minimum length of Restrained joint DI pipes at bends) including rubber gasket confirming to IS 5382 : 1985 and locking bars & rubber gaskets etc complete but excluding TaxesDuctile Iron Double Chambered Restrained Joint
fittingsFittings above 500mm dia
500
415
207915
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHa) 0.0 m To 3.0 m Depth
22583.74
133
3021026.9
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
24901.77
481
11978996.46
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete and as directed by Engineer-in-charge
16937.81
115
1950050.07
... More
Vibrated reinforced cement concrete M 20 grade with batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed and compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MoRTH (5th revision ) and as directed by the Engineer-in-Charge For Pipe Encasement
109.66
5038
552508.75
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) /(Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying complete and as directed by the Engineer in Charge.
4.39
91446
401448.07
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc complete and as directed by Engineer-in-charge.100mm dia DI K7 Pipes
6671
1377
9186634.1
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc complete and as directed by Engineer-in-charge.150mm dia DI K7 Pipes
4986.5
2000
9977437.99
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc complete and as directed by Engineer-in-charge.200mm dia DI K7 Pipes
1009
2650
2674445.31
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc complete and as directed by Engineer-in-charge.300mm dia DI K7 Pipes
32
4542
145348.16
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc complete and as directed by Engineer-in-charge.400mm dia DI K7 Pipes
3443
6906
23780353.41
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc complete and as directed by Engineer-in-charge.500mm dia DI K7 Pipes
477
9851
4698955.62
... More
Supply & Delivery of Centrifugal Cast (spun) Ductile Iron fittings conforming to IS: 9523/2000 having dimensions as per BIS, with zinc coating externally and inside mortar lining (with finishing as per clause 13/IS9523/2000) including transportation to site of work , lowering carefully into trench and laying them true to alignment and gradient ((Reference to specifications. BIS No.3114/94) etc complete Below 500mm Dia
10389
154
1600113.78
... More
Supply & Delivery of Centrifugal Cast (spun) Ductile Iron fittings conforming to IS: 9523/2000 having dimensions as per BIS, with zinc coating externally and inside mortar lining (with finishing as per clause 13/IS9523/2000) including transportation to site of work , lowering carefully into trench and laying them true to alignment and gradient ((Reference to specifications. BIS No.3114/94) etc complete Above 500mm Dia
129
169
21906.78
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc complete and as directed by Engineer-in-chargeFor Pipes100mm Dia Pipes
7233
66
481211.49
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc complete and as directed by Engineer-in-chargeFor Pipes150mm Dia Pipes
5625
108
609581.25
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc complete and as directed by Engineer-in-charge200mm Dia Pipes
1009
157
158967.95
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc complete and as directed by Engineer-in-charge250mm Dia Pipes
146
212
31077.56
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc complete and as directed by Engineer-in-charge300mm Dia Pipes
155
275
42673.05
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc complete and as directed by Engineer-in-charge400mm Dia Pipes
4375
421
1843756.25
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc complete and as directed by Engineer-in-charge500mm Dia Pipes
477
594
283481.1
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc complete and as directed by Engineer-in-chargeFor Pipe Network100mm dia Pipes
1315
179
236239.75
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc complete and as directed by Engineer-in-charge150mm dia Pipes
1023
217
222645.72
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc complete and as directed by Engineer-in-charge200mm dia Pipes
183
236
43272.18
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc complete and as directed by Engineer-in-charge250mm dia Pipes
27
266
7195.5
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc complete and as directed by Engineer-in-charge300mm dia Pipes
28
303
8489.6
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc complete and as directed by Engineer-in-charge400mm dia Pipes
795
388
308785.95
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc complete and as directed by Engineer-in-charge500mm dia Pipes
87
483
42068.85
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete 100mm Dia
1315
79
104581.95
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Pipe Network150mm Dia
1023
115
118555.47
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Pipe Network200mm Dia
183
139
25574.25
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Pipe Network250mm Dia
27
156
4233.33
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete 300mm Dia
28
238
6680.52
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Pipe Network400mm Dia
795
334
265553.85
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Pipe Network500mm Dia
87
543
47247.96
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete ii) 11.25º to 45º Bend100mm Dia
1178
79
93686.34
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete ii) 11.25º to 45º Bend150mm Dia
1260
115
146021.4
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete ii) 11.25º to 45º Bend200mm Dia
960
139
134160
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete ii) 11.25º to 45º Bend300mm Dia
180
238
42946.2
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete ii) 11.25º to 45º Bend400mm Dia
5960
334
1990818.8
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete ii) 11.25º to 45º Bend450mm Dia
192
390
75041.28
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete iii) 45º to 90º Bend150mm Dia
280
115
32449.2
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete iii) 45º to 90º Bend200mm Dia
192
139
26832
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete iii) 45º to 90º Bend300mm Dia
260
238
62033.4
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete iii) 45º to 90º Bend450mm Dia
294
390
114906.96
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete 150 X 150 X 80mm Dia
1197
115
138720.33
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Pipe Network150 X 150 X 150mm Dia
432
115
50064.48
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Pipe Network200 X 200 X 80mm Dia
504
139
70434
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete 200 X 200 X 150mm Dia
204
139
28509
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Pipe Network250 X 250 X 250mm Dia
330
156
51740.7
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Pipe Network300 X 300 X 100mm Dia
147
238
35072.73
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Pipe Network300 X 300 X 150mm Dia
165
238
39367.35
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete 300 X 300 X 300mm Dia
462
238
110228.58
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete 400 X 400 X 400mm Dia
3072
334
1026140.16
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Pipe Network500 X 500 X 350mm Dia
510
543
276970.8
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Reducers100 X 80mm Dia
1088
79
86528.64
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Reducers150 X 80mm Dia
234
115
27118.26
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Reducers150 X 100mm Dia
728
115
84367.92
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Reducers200 X 80mm Dia
120
139
16770
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Reducers200 X 100mm Dia
280
139
39130
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Reducers200 X 150mm Dia
152
139
21242
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Reducers250 X 200mm Dia
216
156
33866.64
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Reducers300 X 80mm Dia
76
238
18132.84
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Reducers300 X 100mm Dia
74
238
17655.66
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Reducers300 X 200mm Dia
76
238
18132.84
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Reducers300 X 250mm Dia
140
238
33402.6
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Reducers350 X 300mm Dia
90
302
27199.8
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For ReducersFor Reducers400 X 250mm Dia
992
334
331357.76
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Reducers400 X 350mm Dia
880
334
293946.4
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Reducers500 X 450mm Dia
194
543
105357.52
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete For Reducers600 X 500mm Dia
258
686
177047.34
... More
Manufacture, supply, & delivery of HDPE pipes grade PE 100 (10 kg/sqcm) conforming to IS 4984 - 1995 including transportation to any where in A.P.50mm Dia HDPE Pipes
26408.6
115
3060492.65
... More
Manufacture, supply, & delivery of HDPE pipes grade PE 100 (10 kg/sqcm) conforming to IS 4984 - 1995 including transportation to any where in A.P.63mm Dia HDPE Pipes
939
190
179226.93
... More
Laying and jointing of HDPE pipes by butt fusion welding as per IS:7634-Part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure. 50mm Dia HDPE Pipes
26409
26
700102.59
... More
Laying and jointing of HDPE pipes by butt fusion welding as per IS:7634-Part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure. 63mm Dia HDPE Pipes
939
26
24892.89
... More
Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to anywhere in AP.a) HDPE Tees63mm Dia
31
214
6656.63
... More
Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to anywhere in AP.a) HDPE Tees75mm Dia
4
261
1045.24
... More
Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to anywhere in AP.d) HDPE Bends75mm Dia
12
246
2958.48
... More
Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to anywhere in AP.e) HDPE Reducers75 x 90mm Dia
25
232
5822.75
... More
Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to anywhere in AP.f) M.S. Flangle50mm Dia
94
118
11107.04
... More
Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to anywhere in AP.f) M.S. Flangle75mm Dia
5
190
954.35
... More
1 No.of Composite Clamp Saddle for tapping service connection from DI distribution mains shall be of wrap around design, wide skirt and wide straps support, which shall reinforce the pipe while providing excellent stability to the saddle. Non corrosive plastic body moulded with stainless steel threaded metal insert for tapping outlet and underneath projection to self interlock with DI/HDPE main pipe. Threading size and dimensions shall conform to IS: 554. The body shall have retaining cavity housing for internal and external retention of the elastomeric seal. Straps shall be made Engineering plastic.
2 No. of compression adaptor with one side compression end to suit ½” /3/4”/1” (20mm/25mm/32mm OD )MDPE pipe and other side with female threaded off-take with SS-304 material inserts of sizes ½” /3/4”/1” BSP threads, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin) and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16.
853
1900
1620700
... More
Supply, Delivery, Lying& Jointing of MDPE Blue Pipe 40mm as per ISO 4427 Rev 1. For conveyance of potable water .The pressure rating of 40mm will be 4kg/cm. Certificate for compliance of testing these fittings and pipe as per BS-6920 by designated laboratories to be produced etc., complete and as directed by Engineer-in-charge
32
95
3040
... More
Manufacture, supply, delivery, Laying & Jointing of 16mm PE flexible pipes including transportation etc., complete and as directed by Engineer-in-charge
79458
8
683338.8
... More
Manufacture, supply, delivery, Laying of 16mm Start Connector/takeoff including transportation etc., complete and as directed by Engineer-in-charge
1770
-
1239
... More
Manufacture, supply, delivery, Laying of 16mm End Cap including transportation etc., complete and as directed by Engineer-in-charge
1770
-
1239
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm hard granite machine crushed metal mechanically mixed , compacted by vibration including curing for 14 days including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawings and technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MORTH and directed by the departmental officersPCC for Thrust blocks & Valve Chambers
57.02
5052
288085.57
... More
Vibrated reinforced cement concrete M 25 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 403 kgs)Note : The rate shall be adjusted as per the approved design mix by the competent authority For Thrust Block
102.89
5495
565415.53
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) /(Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying complete and as directed by the Engineer in Charge.For Thrust Block & Valve Chambers
0.72
91446
65841.14
... More
Laying and Providing End caps for DI & MS crossing pipes using Socket Flanges and Blank Flange joints.Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) (ex-works) Excluding Transportation etc., complete and as directed by Engineer-in-chargeFor DI pipe crossings (500mm)
58
154
8933.16
... More
Manufacturing, Supply, Delivery of Double chambered restrained joint DI K9 Pipes confirming to IS 8329 (restrained joints are designed and tested as per ISO 10804) (to be used to for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985 /8329-2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specialsand excluding taxes.100mm Dia
11
1967
21645.91
... More
Manufacturing, Supply, Delivery of Double chambered restrained joint DI K9 Pipes confirming to IS 8329 (restrained joints are designed and tested as per ISO 10804) (to be used to for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985 /8329-2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specialsand excluding taxes.150mm Dia
11
2733
30069.38
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994)100mm Dia
11
66
731.83
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994)150mm Dia
11
108
1192.07
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.)100mm Dia
2
179
359.3
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.)150mm Dia
2
217
435.28
... More
Manufacture, Supplying and fitting Ductile Iron Double Chambered Restrained Joint fittings confirming to IS 9523 : 2000 (restrained joints are designed and tested as per ISO 10804) of Class K-12 (Alternative and to avoid concrete thrust blocks along with minimum length of Restrained joint DI pipes at bends) including rubber gasket confirming to IS 5382 : 1985 and locking bars & rubber gaskets etc complete but excluding TaxesDuctile Iron Double Chambered Restrained Joint
fittingsFittings upto 500mm dia
500
366
183490
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHa) 0.0 m To 3.0 m Depth
138382.27
133
18511396.26
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHb) 3.0 m To 6.0 m Depth including Dewatering
81170.38
160
12991319.32
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHc) 6.0m including Dewatering
12431.29
197
2457417.41
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
21215.4
481
10205668.17
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm hard granite machine crushed metal mechanically mixed , compacted by vibration including curing for 14 days including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawings and technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MORTH and directed by the departmental officers PCC bedding for Power Conduit crossings
5011.75
5052
25321165.23
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete and as directed by Engineer-in-charge
26227.15
115
3019531.78
... More
Supply of the HDPE Electrical pipe conduits with permanent Lubricant inner layer with ribs , dimensional ratio of 13.5, deflection not greater than 5% when exposed to the normal operating temperature 90 degrees centigrade under the overburden soil pressure and other physical properties confirming to ASTMF 2160 and / or NEMA TC 7 ( The expected service life of HDPE Pipe conduit and accessories shall not be less than 50 years) including transportation225mm HDPE
92746.88
3297
305796665.52
... More
Laying and jointing of HDPE pipes by butt fusion welding as per IS:7634-Part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure. 225 mm Jointing HDPE pipes
90835
107
9725703.45
... More
Manufacture, Supply and Delivery of RCC NP4 Socket and Spigot pipes conforming to B.I.S. 458/2003 (rate per meter of effective length) inclusive of Transportation.800mm dia RCC NP4
442.58
8464
3746430.85
... More
Manufacture, Supply and Delivery of RCC NP4 Socket and Spigot pipes conforming to B.I.S. 458/2003 (rate per meter of effective length) inclusive of Transportation.1200mm dia RCC NP4
67.3
14532
978022.44
... More
Manufacture, Supply and Delivery of RCC NP4 Socket and Spigot pipes conforming to B.I.S. 458/2003 (rate per meter of effective length) inclusive of Transportation.1600mm dia RCC NP4
2095.44
23187
48587910.23
... More
Lowering the RCC pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/1985 800mm dia RCC NP4
794.51
648
515430.42
... More
Lowering the RCC pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/1985 1200mm dia RCC NP4
310.9
1192
370891.26
... More
Lowering the RCC pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/1985 1600mm dia RCC NP4
2095.44
1715
3594915.91
... More
Providing Spacers of Acrylonitrile Butadiene Styrene (ABS) material make with 10mm thk for HDPE Pipe conduits including placing, positioning at 1.5 mtr interval as directed by engineer-in-charge.Spacers For Power Duct
49692.5
210
10435425
... More
Supply and Laying of Warning tape of 225 mm thick in excavated trenches in two layer ,one Yellow colour tape at 100 mm and 250mm width Below FRL and Red colour tape at 400 mm and as directed by engineer-in-charge.
64731.12
29
1877202.48
... More
Supply & Placing of chequered Cement concrete heavy duty tiles confirming to IS 1380 using aggregate cement pigments of of 25 mm thick(any shade-300 x300 mm) set over base coat of cement mortar 1:6 12 mm thick over cc bed already laid or RCC roof slab,including near cemnt slurry of honeylike consistency spread at the rate 3.3 kgs/sqm and jointed with need cement to full depth mixed with pigment of matching shade including cost of all materials like cement,sand,water and tiles etc ,complete finished item of work.
9183.66
1073
9854801.87
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHa) 0.0 m To 3.0 m Depth
9768.34
133
1306710.84
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHb) 3.0 m To 6.0 m Depth including Dewatering
9421.15
160
1507855.06
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm hard granite machine crushed metal mechanically mixed , compacted by vibration including curing for 14 days including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawings and technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MORTH and directed by the departmental officers
317.1
5052
1602103.36
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authoritya) Raft
805.5
5499
4429911.69
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authorityb) Walls-300mm thick
2037.69
9102
18547563.8
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authorityb) Walls-200mm thick
502.21
10995
5522220.81
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authorityb) Walls-250mm thick
604.13
9859
5956534.52
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authorityb) Walls-350mm thick
86.18
8561
737806.8
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authorityc) Slab
689.76
5842
4029715.87
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
992.36
481
477374.78
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) /(Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying complete and as directed by the Engineer in Charge.
779.7
91446
71300469.59
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete and as directed by Engineer-in-charge
18747.11
115
2158354.77
... More
Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery and Fixing of Heavy Duty manhole covers and frames - 24x24 HD 20 with ISI marking anywhere in A.P., F.O.R. destination including, loading, unloading & stacking at site etc., complete
381
2147
818128.92
... More
Manufacture as per company’s standard specification supply and delivery of encapsulated plastic steps for man holes anywhere in A.P. including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work etc, complete but excluding all taxes.
6868
188
1295304.8
... More
Manufacture, supply,delivery and fixing of GI Electrode of 40mm Dia and transportation anywhere in Andhra Pradesh,
390
540
210759.9
... More
Supply Delivery and fixing of FRP Gratings for man holes anywhere in A.P. including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work etc, complete.
46.8
2447
114519.6
... More
Manufacture supply Fabrication and fixing of fixing of ISA 50x50x6 for manholes Grating including anywhere in A.P. including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work etc, complete
1404
107
151533.72
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH0.0 m To 3.0 m Depth
8929.44
133
1194491.19
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH3.0 m To 6.0 m Depth with Dewatering
3987.45
160
638191.37
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH6.0m Depth with Dewatering
151.52
197
29952.47
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
225.11
481
108289.17
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm hard granite machine crushed metal mechanically mixed , compacted by vibration including curing for 14 days including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawings and technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MORTH and directed by the departmental officers
112.55
5052
568643.12
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authoritya) Raft
582.89
5499
3205650.19
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication and centering charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authority b) RCC Duct wall
637.07
5315
3386084.39
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authorityc) Slab
481.28
5842
2811734.02
... More
Form work for walls including cost & conveyance of all materials to site and labour charges, other incidental hire and operational charges of all T&P etc., complete as per approved drawings etc., complete and as directed by Engineer-in-charge
2948.4
568
1674927.07
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) /(Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying complete and as directed by the Engineer in Charge.
93.57
91446
8556605.03
... More
Providing fitting and fixing mild steel plate size (0.15x0.01) and bar complete as per drawing and technical specifications Clause 1208.2MORD / 1900 & 2703 MORTH and as directed by Engineer-in-charge
1291.68
1334
1723708.21
... More
Providing fitting and fixing of mild steel 16 mm M.S.Rod welded to M.S.Flat @800 c/c and bar complete as per drawing and technical specifications Clause 1208.2MORD / 1900 & 2703 MORTH and as directed by Engineer-in-charge.
2854.8
178
510638.08
... More
Supply Delivery and fixing of FRP Gratings for man holes anywhere in A.P. including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work etc, complete.
90.79
2447
222163.13
... More
Supply, fabricating , installing structural steel with MS Channels, Angles, Flats, Rods, etc complete as per Drawing and as directed by Engineer-in-charge
5750.83
107
620687.08
... More
Supply of PVC Water Stopper 310mm wide to be provided at end of crossing etc., complete and as directed by Engineer-in-charge
294.72
519
153024.52
... More
Supply of Polysheet of 125m micron thick to cover PVC water stopper etc., complete and as directed by Engineer-in-charge
50.04
17
867.19
... More
Brick Masonry in CM (1:4) with Modular Bricks 19 x 9 x 9 cms 2nd class complete excluding pointing and plastering as per drawig and technical specifications clauses 600,1202 & 1203 MORD/1300 MORTH including cost and conveyance of materials to site with all leads & lifts , all other incidental and operational charges etc., complete and as directed by the Engineer-in-charge
5.04
9125
45993.02
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHa) 0.0 m To 3.0 m Depth
4007.21
133
536044.48
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHb) 3.0 m To 6.0 m Depth
1296.39
160
207487.22
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
5924.74
481
2850096.18
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm hard granite machine crushed metal mechanically mixed , compacted by vibration including curing for 14 days including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawings and technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MORTH and directed by the departmental officers
333.32
5052
1684052.64
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete and as directed by Engineer-in-charge
6735.56
115
775465.02
... More
Brick Masonry in CM (1:4) with Modular Bricks 19 x 9 x 9 cms 2nd class complete excluding pointing and plastering as per drawig and technical specifications clauses 600,1202 & 1203 MORD/1300 MORTH including cost and conveyance of materials to site with all leads & lifts , all other incidental and operational charges etc., complete and as directed by the Engineer-in-charge
2.09
9125
19072.5
... More
Manufacture, Supply and Delivery of RCC NP4 Socket and Spigot pipes conforming to B.I.S. 458/2003 (rate per meter of effective length) inclusive of Transportation.400mm Dia
1581
2795
4420223.04
... More
Manufacture, Supply and Delivery of RCC NP4 Socket and Spigot pipes conforming to B.I.S. 458/2003 (rate per meter of effective length) inclusive of Transportation.500mm Dia
307
3542
1087667.23
... More
Lowering the RCC pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/1985 400mm Dia
1581
335
530694.27
... More
Lowering the RCC pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/1985 500mm Dia
307
410
126130.95
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHa) 0.0 m To 3.0 m Depth
126455.31
133
16915926.82
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHb) 3.0 m To 6.0 m Depth including Dewatering
83266.04
160
13326729.7
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHc) 6.0m including Dewatering
9780.54
197
1933417.15
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
735.63
481
353874.81
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm hard granite machine crushed metal mechanically mixed , compacted by vibration including curing for 14 days including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawings and technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MORTH and directed by the departmental officers
2117.53
5052
10698523.87
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete and as directed by Engineer-in-charge
12744.47
115
1467270.83
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron with HAC and Polyethylene Sleeve Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation .600mm Dia DI K7 Pipes
260.42
13804
3594957.47
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron with HAC and Polyethylene Sleeve Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation .700mm Dia DI K7 Pipes
579.1
17778
10295679.92
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron with HAC and Polyethylene Sleeve Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation .900mm Dia DI K7 Pipes
841.85
27626
23257276.42
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.600mm Dia DI-K7 Pipes
74
686
50781.02
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.700mm Dia DI-K7 Pipes
106
912
96706.98
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.800mm Dia DI-K7 Pipes
13
1289
16763.89
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.900mm Dia DI-K7 Pipes
295
1556
459176.35
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994)600mm Dia DI-K7 Pipes
406.42
793
322486.14
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994)700mm Dia DI-K7 Pipes
579.1
1023
592818.88
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994)800mm Dia DI-K7 Pipes
66.05
1281
84626.56
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994)900mm Dia DI-K7 Pipes
1620.17
1557
2523544.39
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.)600mm Dia DI pipes
74
559
41405.22
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.)700mm Dia DI pipes
106
635
67364.06
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.)800mm Dia DI pipes
13
1117
14533.48
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.)900mm Dia DI pipes
295
1289
380266.8
... More
Manufacture, supply, & delivery of (DWC) structured wall polyethylene/polypropylene piping system with nonsmooth external annular corrugated and smooth internal surface (Double Wall) for nonpressure sewage & Drainage application pipes of standard length 6 m, grade conforming to IS 16098 (part-II: 2013) including transportation to anywhere in A.P .200mm DWC Pipe
1609.74
602
969321.04
... More
Laying of SN8 structured wall (External Annular Corrugated & Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth & alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe & sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications & detail engineering, including carriage of pipes & fittings from site stacks to the place of laying etc. as per direction of Engineer-in-charge. (Payment to be made on the basis of actual finished length of pipe line).200mm DWC Pipe
1609.24
137
221222.22
... More
Manufacture, supply, & delivery of (DWC) structured wall polyethylene/polypropylene piping system with nonsmooth external annular corrugated and smooth internal surface (Double Wall) for nonpressure sewage & Drainage application pipes of standard length 6 m, grade conforming to IS 16098 (part-II: 2013) including transportation to anywhere in A.P .250mm DWC Pipe
384.95
937
360821.33
... More
Laying of SN8 structured wall (External Annular Corrugated & Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth & alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe & sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications & detail engineering, including carriage of pipes & fittings from site stacks to the place of laying etc. as per direction of Engineer-in-charge. (Payment to be made on the basis of actual finished length of pipe line).250mm DWC Pipe
384.95
215
83099.16
... More
Manufacture, supply, & delivery of (DWC) structured wall polyethylene/polypropylene piping system with nonsmooth external annular corrugated and smooth internal surface (Double Wall) for nonpressure sewage & Drainage application pipes of standard length 6 m, grade conforming to IS 16098 (part-II: 2013) including transportation to anywhere in A.P .300mm DWC Pipe
125.65
1272
159888.37
... More
Laying of SN8 structured wall (External Annular Corrugated & Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth & alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe & sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications & detail engineering, including carriage of pipes & fittings from site stacks to the place of laying etc. as per direction of Engineer-in-charge. (Payment to be made on the basis of actual finished length of pipe line).300mm DWC Pipe
83.65
286
23949.83
... More
Laying of SN8 structured wall (External Annular Corrugated & Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth & alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe & sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications & detail engineering, including carriage of pipes & fittings from site stacks to the place of laying etc. as per direction of Engineer-in-charge. (Payment to be made on the basis of actual finished length of pipe line).400mm DWC Pipe
265.39
516
137193.36
... More
Manufacture, supply, & delivery of (DWC) structured wall polyethylene/polypropylene piping system with nonsmooth external annular corrugated and smooth internal surface (Double Wall) for nonpressure sewage & Drainage application pipes of standard length 6 m, grade conforming to IS 16098 (part-II: 2013) including transportation to anywhere in A.P .500mm DWC Pipe
436.2
3294
1437209.21
... More
Laying of SN8 structured wall (External Annular Corrugated & Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth & alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe & sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications & detail engineering, including carriage of pipes & fittings from site stacks to the place of laying etc. as per direction of Engineer-in-charge. (Payment to be made on the basis of actual finished length of pipe line).500mm DWC Pipe
436.2
753
328576.37
... More
Providing and constructing of precast RCC circular manhole of grade M-30,Type- A ,900 mm internal diameter according to drawing, fixing (slant portion of 0.64 m and raft 0.3 m) with cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter, total weight of cover and frame to be not less than 182 kg, Plastering with SRC cement motor 1:3 including centering shuttering all complete as per standard design and as directed by Engineer in charge.
6
18480
110885.82
... More
Providing RCC M-30 grade for Manhole Type-A Wall Extra Depth for every 1.0 m depth beyond 0.64 m and inling with SRC cement motor of 1:3. With Wall thickness 150mm including Formwork & Reinforcement HYSD FE500 including cost of labour,material, centreing charges etc complete as per drawing and specification and as directed by the Engineer -in-charge (with minimum cement quantity of 407kgs per cum for M30grade)Note : The rate shall be adjusted as per the approved design mix by the competent authority
6.49
10647
69103.18
... More
Supply and placing of Plain Cement concrete M15 nominal mix prop (Cement : fine aggregate: coarse aggregate ) using 40mm guage hard granite machine crushed metal including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawing, technical specifications standard design and as directed by Engineer in charge. (If quantity of cement increase/decrease the rate will be deducted as per design mix) PCC - M15 For Benching
1.79
5224
9351.77
... More
Providing and constructing of precast RCC circular manhole of grade M-30,Type- B, 1200mm internal diameter according to drawing, fixing (Slant portion of 1.15m and raft0.3m) with cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter, total weight of cover and frame to be not less than 182 kg. Plastering with SRC cement motor 1:3 including centering shuttering all complete as per standard design and as directed by Engineer in charge
9
29949
269546.85
... More
Providing RCC M-30 grade for Manhole Type-B Wall Extra Depth for every 1.0 m depth beyond 1.15 m and inling with SRC cement motor of 1:3.With Wall thickness 150mm including Form work &Reinforcement HYSD FE500 including cost of labour,material, centreing charges etc complete as per drawing and specification and as directed by the Engineer -in-charge (with minimum cement quantity of 407kgs per cum for M30grade)Note : The rate shall be adjusted as per the approved design mix by the competent authority
10.32
16259
167794.84
... More
Supply and placing of Plain Cement concrete M15 nominal mix prop (Cement : fine aggregate: coarse aggregate ) using 40mm guage hard granite machine crushed metal including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawing, technical specifications standard design and as directed by Engineer in charge. (If quantity of cement increase/decrease the rate will be deducted as per design mix) PCC - M15 For Benching
4.94
5224
25808.78
... More
Providing and constructing of precast RCC circular manhole of grade M-30,Type- C, 1500 mm internal diameter according to drawing, fixing (Slant portion of 1.5 m and raft 0.33 m) with cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter, total weight of cover and frame to be not less than 182 kg. Plastering with SRC cement motor 1:3 including centering shuttering and Steel Reinforcement HYSD Steel FE 500 all complete as per standard design and as directed by Engineer in charge.
71
43631
3097850.7
... More
Providing RCC M-30 grade for Manhole Type-C Wall Extra Depth for every 1.0 m depth beyond 1.5 m and inling with SRC cement motor of 1:3.With Wall thickness 200mm including Form work & Reinforcement HYSD FE500 including cost of labour,material, centreing charges etc complete as per drawing and specification and as directed by the Engineer -in-charge (with minimum cement quantity of 407kgs per cum for M30grade)Note : The rate shall be adjusted as per the approved design mix by the competent authority
225.63
23677
5342406.22
... More
Supply and placing of Plain Cement concrete M15 nominal mix prop (Cement : fine aggregate: coarse aggregate ) using 40mm guage hard granite machine crushed metal including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawing, technical specifications standard design and as directed by Engineer in charge. (If quantity of cement increase/decrease the rate will be deducted as per design mix) PCC - M15 For Benching
68.84
5224
359651.14
... More
Providing and constructing M-30 RCC circular manhole of grade M-30,Type- D , 1800 mm internal diameter according to drawing, fixing (Slant portion of 2 m and raft 0.4 m) with cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter, total weight of cover and frame to be not less than 182 kg. Plastering with SRC cement motor 1:3 including centering shuttering all complete as per standard design and as directed by Engineer in charge.
96
61347
5889313.92
... More
Providing RCC M-30 grade for Manhole Type-D Wall Extra Depth for every 1.0 m depth beyond 2 m and inling with SRC cement motor of 1:3.With Wall thickness 200mm including Form work & Reinforcement HYSD FE500 including cost of labour,material, centreing charges etc complete as per drawing and specification and as directed by the Engineer -in-charge (with minimum cement quantity of 407kgs per cum for M30grade)Note : The rate shall be adjusted as per the approved design mix by the competent authority
436.63
30405
13275861.77
... More
Supply and placing of Plain Cement concrete M15 nominal mix prop (Cement : fine aggregate: coarse aggregate ) using 40mm guage hard granite machine crushed metal including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawing, technical specifications standard design and as directed by Engineer in charge. (If quantity of cement increase/decrease the rate will be deducted as per design mix) PCC - M15 For Benching
162.44
5224
848659.66
... More
Manufacture as per company’s standard specification supply and delivery of encapsulated plastic steps for man holes anywhere in A.P. including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work etc.
2825
188
532795
... More
Providing sand cast iron drop connection externally for 60 cm drop from branch sewer line to main sewer manhole including inspection and cleaning eye with chain and lid, sand cast iron drop pipe and bend encased allround with cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) with all centering and shuttering required, cutting holes in walls and making good with brick work in cement mortar 1:4 (1 cement : 4 coarse sand) plastered with cement mortar 1:3 (1 cement : 3 coarse sand) on inside of the manhole wall, lead caulked joints between sand cast iron pipes and fittings, stiff cement mortar 1:1 (1 cement : 1 fine sand) joints between sand cast iron tee and S.W. pipe, making required channels complete as per standard design and specifications
150 mm dia sand cast iron drop connectionFor depths up to 60 cm
4
15841
63364.28
... More
Providing sand cast iron drop connection externally for 60 cm drop from branch sewer line to main sewer manhole including inspection and cleaning eye with chain and lid, sand cast iron drop pipe and bend encased allround with cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) with all centering and shuttering required, cutting holes in walls and making good with brick work in cement mortar 1:4 (1 cement : 4 coarse sand) plastered with cement mortar 1:3 (1 cement : 3 coarse sand) on inside of the manhole wall, lead caulked joints between sand cast iron pipes and fittings, stiff cement mortar 1:1 (1 cement : 1 fine sand) joints between sand cast iron tee and S.W. pipe, making required channels complete as per standard design and specifications
150 mm dia sand cast iron drop connectionExtra for depths beyond 60 cm of sand cast iron drop connection complete
4.77
4139
19744.56
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHa) 0.0 m To 3.0 m Depth
20333.64
133
2720031.02
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
9657.58
481
4645778.86
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm hard granite machine crushed metal mechanically mixed , compacted by vibration including curing for 14 days including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawings and technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MORTH and directed by the departmental officersFor PCC Bedding
2074.93
5052
10483293.33
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete and as directed by Engineer-in-charge
11732.51
115
1350763.88
... More
Manufacture, Supply and Delivery of RCC NP4 Socket and Spigot pipes conforming to B.I.S. 458/2003 (rate per meter of effective length) inclusive of Transportation.600mm Dia RCC NP4
1136.5
4776
5428799.11
... More
Manufacture, Supply and Delivery of RCC NP4 Socket and Spigot pipes conforming to B.I.S. 458/2003 (rate per meter of effective length) inclusive of Transportation.1000mm Dia RCC NP4
1114
11173
12447245.58
... More
Lowering the RCC pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/1985 600mm Dia RCC NP4
1158.5
456
529121.71
... More
Lowering the RCC pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/1985 1000mm Dia RCC NP4
1371.5
931
1277744.26
... More
Supply and Transportation for DWC pipe double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part - II.
Makes: DURA LINE (Dura Guard)/Precision/CPE or any ISI approved make having ISI mark.as directed by the Engineer-in-charge. 160mm Dia DWC
25948.43
529
13738396.26
... More
Laying & Jointing of DWC pipe double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part - II.
Makes: DURA LINE (Dura Guard)/Precision/CPE or any ISI approved make having ISI mark.as directed by the Engineer-in-charge. 160mm Dia DWC
34573.5
21
730192.32
... More
Providing of 7 way ( Multi duct for ICT) with permanent Lubricant inner layer with ribs , dimensional ratio of 13.5, deflection not greater than 5% when exposed to the normal operating temperature 90 degrees centigrade under the overburden soil pressure and other physical properties confirming to ASTMF 2160 and / or NEMA TC 7 ( The expected service life of HDPE Pipe conduit and accessories shall not be less than 50 years) including transportation
90480.91
1085
98173596.97
... More
Laying and Jointing of 7 Way 40mm Multi Duct in ready made trenches true to alignment and gradient with push fit coupler including all sundries but excluding cost & conveyance of pipes from source of supply and jointing materials etc, complete and as directed by Engineer-in-charge
95952.81
40
3899522.2
... More
Providing Spacers of Acrylonitrile Butadiene Styrene (ABS) material make with 10mm thk for HDPE Pipe conduits including placing, positioning at 1.5 mtr interval as directed by engineer-in-charge.Spacers for ICT : DWC- 4 & 7 Way-6
183
1860
340380
... More
Providing Spacers of Acrylonitrile Butadiene Styrene (ABS) material make with 10mm thk for HDPE Pipe conduits including placing, positioning at 1.5 mtr interval as directed by engineer-in-charge.Spacers for ICT : DWC- 4 & 7 Way-7
228
2030
462840
... More
Providing Spacers of Acrylonitrile Butadiene Styrene (ABS) material make with 10mm thk for HDPE Pipe conduits including placing, positioning at 1.5 mtr interval as directed by engineer-in-charge.Spacers for ICT : DWC- 6 & 7 Way-8
88
2620
230560
... More
Providing Spacers of Acrylonitrile Butadiene Styrene (ABS) material make with 10mm thk for HDPE Pipe conduits including placing, positioning at 1.5 mtr interval as directed by engineer-in-charge.Spacers for ICT : DWC- 3 & 7 Way-6
283
1650
466950
... More
Providing Spacers of Acrylonitrile Butadiene Styrene (ABS) material make with 10mm thk for HDPE Pipe conduits including placing, positioning at 1.5 mtr interval as directed by engineer-in-charge.Spacers for ICT : DWC- 2 & 7 Way-5
115
1270
146050
... More
Providing Spacers of Acrylonitrile Butadiene Styrene (ABS) material make with 10mm thk for HDPE Pipe conduits including placing, positioning at 1.5 mtr interval as directed by engineer-in-charge.Spacers for ICT : DWC- 2 & 7 Way-4
53
1100
58300
... More
Providing Spacers of Acrylonitrile Butadiene Styrene (ABS) material make with 10mm thk for HDPE Pipe conduits including placing, positioning at 1.5 mtr interval as directed by engineer-in-charge.Spacers for ICT : DWC- 2 & 7 Way-6
9352
1440
13466880
... More
Supply and Laying of Warning tape of 225 mm thick in excavated trenches in two layer ,one Yellow colour tape at 100 mm and 250mm width Below FRL and Red colour tape at 400 mm and as directed by engineer-in-charge.
63292
29
1835468
... More
Supply & Placing of chequered Cement concrete heavy duty tiles confirming to IS 1380 using aggregate cement pigments of of 25 mm thick(any shade-300 x300 mm) set over base coat of cement mortar 1:6 12 mm thick over cc bed already laid or RCC roof slab,including near cemnt slurry of honeylike consistency spread at the rate 3.3 kgs/sqm and jointed with need cement to full depth mixed with pigment of matching shade including cost of all materials like cement,sand,water and tiles etc ,complete finished item of work.
12909
1073
13852389.72
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHa) 0.0 m To 3.0 m Depth
5659.57
133
757080.68
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHb) 3.0 m To 6.0 m Depth including dewatering
5376.08
160
860441.6
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm hard granite machine crushed metal mechanically mixed , compacted by vibration including curing for 14 days including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawings and technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MORTH and directed by the departmental officers
195.21
5052
986271.2
... More
Vibrated reinforced cement concrete M 25 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 403 kgs)Note : The rate shall be adjusted as per the approved design mix by the competent authority a) Raft
638.95
5495
3511247.49
... More
Vibrated reinforced cement concrete M 25 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 403 kgs)Note : The rate shall be adjusted as per the approved design mix by the competent authority b) Walls-250mm thick
1494.6
9859
14736292.67
... More
Vibrated reinforced cement concrete M 25 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 403 kgs)Note : The rate shall be adjusted as per the approved design mix by the competent authority b) Slab
261.13
5842
1525573.69
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
761.63
481
366382.11
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) /(Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying complete and as directed by the Engineer in Charge.
191.57
91446
17518315.97
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete and as directed by Engineer-in-charge
5685.85
115
654611.91
... More
Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery and Fixing of Heavy Duty manhole covers and frames - 24x24 HD 20 with ISI marking anywhere in A.P., F.O.R. destination including, loading, unloading & stacking at site etc., complete
195
2147
418727.4
... More
Manufacture as per company’s standard specification supply and delivery of encapsulated plastic steps for man holes anywhere in A.P. including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work etc, complete.
4122
188
777409.2
... More
Providing and Supply of FRP Gratings for man holes anywhere in A.P. including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work etc, complete
70.2
2447
171779.4
... More
Providing and Fixing of ISA 50x50x6mm for for man holes anywhere in A.P. including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work etc, complete
2106
107
227300.58
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHUpto 3m
17778.8
133
2378270.08
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
4444.65
481
2138098.88
... More
Supply delivery and laying of Smooth Wall 40mm outer dia and 33mm inner dia Permanently Lubricated HDPE Telecom Duct with Silicore inner layer and 4mm PP Rope in 500mts Coil format confirming to TEC GR.No.TEC/GR/TX/CDS-008-03, March-2011 with Amdt. No.1, dt:25/28.03.2013 etc., complete and as directed by Engineer-in-charge40mm Dia
225760
55
12416800
... More
Manufacture, Supply and Delivery of RCC NP4 Socket and Spigot pipes conforming to B.I.S. 458/2003 (rate per meter of effective length) inclusive of Transportation.300mm Dia
8136
1881
15303816
... More
Lowering the RCC pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/1985 complete and as directed by Engineer-in-charge300mm Dia
8136
262
2134398.24
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm guage hard granite machine crushed metal including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete for levelling course as directed by the departmental officers including Taxes
3.46
5052
17481.17
... More
Vibrated reinforced cement concrete M 25 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 403 kgs)Note : The rate shall be adjusted as per the approved design mix by the competent authority - Raft
11.54
5495
63416.22
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) /(Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying complete and as directed by the Engineer in Charge.
0.69
91446
63097.76
... More
Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery and Fixing of Heavy Duty manhole covers and frames with ISI marking anywhere in A.P., F.O.R. destination including, loading, unloading & stacking at site.24x24 HD-20
114
2147
244794.48
... More
Manufacture, supply and delivery of submerged ARC welded M.S Pipe having beveled ends from plate or coil conforming to IS-3589 and/or IS-5504 with its latest revision / amendment with inside 406 micron thick food grade epoxy coating and outside 3LPE coating conforming to DIN 30670 / Polyolefin Tape coating conforming to AWWA C214 for the specified thickness & inner diameter of pipe, external field joint coating with polyolefin backing and internal field joint coating with chemically cured 2 part epoxy based solvent free liquid coating material for Drinking Water NSF approved etc., complete including all labour, materials, transportation and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge 1600mm dia 14.2mm thick
250.23
47155
11799650.7
... More
Removing of Existing Coating and Providing and applying Spray applied, 100% Solids (Solvent free) Two Component PU ( Polyurethane) coating as per AWWA C222 Standard on external surface of M.S. Pipe including preparation of pipe outer surface by solvent cleaning, abrasive blasting to a finish of Grade 2.5 to DIN EN ISO 8501-1 and surface profile of 50 to 75 microns as per DIN EN ISO 8503-2 including field joints coating at site complete as per technical specification and direction of Engineer in In charge. Minimum dry film thickness of coating shall be 1000 micron.-1600mm Dia MS Pipes
1570.13
8087
12698771.8
... More
Removing of Existing Coating and Providing and applying Spray applied, 100% Solids (Solvent free) Two Component PU ( Polyurethane) coating as per AWWA C222 Standard on external surface of M.S. Pipe including preparation of pipe outer surface by solvent cleaning, abrasive blasting to a finish of Grade 2.5 to DIN EN ISO 8501-1 and surface profile of 50 to 75 microns as per DIN EN ISO 8503-2 including field joints coating at site complete as per technical specification and direction of Engineer in In charge. Minimum dry film thickness of coating shall be 1000 micron.-1800mm Dia MS Pipes
20
9098
181973.6
... More
Providing and applying Solvent free, two pack liquid Foodgrade epoxy lining to internal surface of M.S. Pipe as per BS 6920:2000 and AWWA C210 standard including preparation of internal surface of pipe by cleaning and abrasive blasting including field joints coating at site complete as per technical specification and direction of Engineer in In charge. Liquid Epoxy shall be NSF/WARS approved for drinking water and minimum thickness of lining shall be 406 microns. - 1600mm Dia MS Pipes
1570.13
5473
8594750.31
... More
Providing and applying Solvent free, two pack liquid Foodgrade epoxy lining to internal surface of M.S. Pipe as per BS 6920:2000 and AWWA C210 standard including preparation of internal surface of pipe by cleaning and abrasive blasting including field joints coating at site complete as per technical specification and direction of Engineer in In charge. Liquid Epoxy shall be NSF/WARS approved for drinking water and minimum thickness of lining shall be 406 microns. - 1800
20
6158
123163
... More
Removing ,Cutting and Uprooting of already laid SAW Spirally welded M.S Pipe from Trenches including dewatering, Excavation,Cutting of Joints and lifting of MS Pipes from Trenches without any damage and without any change in pipe dimensions including Cost of Site Cutting, complete. etc including all labour,materials and machineary etc., as per specification and as per direction of Engineer-in-charge1600mm dia MS Pipes
319
5751
1834629.61
... More
Relaying of SAW Spirally welded PU Coated M.S Pipe including Bevelling of edges as per IS 1239 part-1:2004 , Laying, Jointing, Hydrostatic Filed Test Pressure, Including Cost of Site Welding, Jointing Materials And Cost of Transportation of Water Including Emptying Pipe Line After Completion Of Field Testing including Ultrasonic and Radiographic tests complete with all taxes, insurance, freight charges, inspection charges, transportation, etc.complete including all labour, materials and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge1600mm dia MS Pipes
319
5751
1834629.61
... More
Transportation of Pipes from Site to Work Shop and back to Site for MS Pipes with a lead of 30Km To and Fro , complete including loading and unloading of pipes at site and workshop etc., all material and labour and machinery etc., complete, taxes, insurance, inspection charges, transportation, etc. complete including all labour, materials and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge.
319
2032
648354.74
... More
Fabrication of Mild Steel bends as per IS: 7322 with three run arc welding using MS plate of required thickness as per specification drawings and as directed by deptl officers including inlining chemically cured 2 part epoxy based solvent free liquid coating material for Drinking Water NSF approved and outcoating with Polyolefin tape coating/heat shrink sleeves incl cost of M.S.Plates, welding rods and all other required materials, inclusive of all taxes and duties and delivery of fabricated inlined and outcoated bends to site, and hoisting, carefully lowering into readymade trenches and laying true to alignment and gradient and perfect lining by jacking and jointing with three run arc welding and inlining and outcoating field welded joints as per the above specification including cost of all jointing materials, cost of necessary testing equipment, labour charges and factory and field hydraulic testing to the required pressure etc., complete 1600mm Dia MS Pipes
39698.58
39
1578812.53
... More
Fabrication of Mild Steel bends as per IS: 7322 with three run arc welding using MS plate of required thickness as per specification drawings and as directed by deptl officers including inlining chemically cured 2 part epoxy based solvent free liquid coating material for Drinking Water NSF approved and outcoating with Polyolefin tape coating/heat shrink sleeves incl cost of M.S.Plates, welding rods and all other required materials, inclusive of all taxes and duties and delivery of fabricated inlined and outcoated bends to site, and hoisting, carefully lowering into readymade trenches and laying true to alignment and gradient and perfect lining by jacking and jointing with three run arc welding and inlining and outcoating field welded joints as per the above specification including cost of all jointing materials, cost of necessary testing equipment, labour charges and factory and field hydraulic testing to the required pressure etc., complete ii) 30º to 60º Bend1800mm Dia MS Pipes
7265.12
39
288933.82
... More
Sand Bedding/Filling in trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH
1200
481
577260
... More
Providing and applying Black Bitumen coating outside of Ductile iron Pipes including all material, labour and machinery etc., complete, with all taxes, insurance, freight charges, inspection charges, transportation, etc. complete including all labour, materials and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge.150mm Dia
338.34
171
57856.14
... More
Providing and applying Black Bitumen coating outside of Ductile iron Pipes including all material, labour and machinery etc., complete, with all taxes, insurance, freight charges, inspection charges, transportation, etc. complete including all labour, materials and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge.250mm Dia
237.83
171
40668.93
... More
Providing and applying Black Bitumen coating outside of Ductile iron Pipes including all material, labour and machinery etc., complete, with all taxes, insurance, freight charges, inspection charges, transportation, etc. complete including all labour, materials and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge.350mm Dia
302.31
171
51695.01
... More
Providing and applying Black Bitumen coating outside of Ductile iron Pipes including all material, labour and machinery etc., complete, with all taxes, insurance, freight charges, inspection charges, transportation, etc. complete including all labour, materials and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge.500mm Dia
127.57
171
21814.47
... More
Providing and applying Black Bitumen coating outside of Ductile iron Pipes including all material, labour and machinery etc., complete, with all taxes, insurance, freight charges, inspection charges, transportation, etc. complete including all labour, materials and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge.600mm Dia
275.5
171
47110.5
... More
Providing and applying Black Bitumen coating outside of Ductile iron Pipes including all material, labour and machinery etc., complete, with all taxes, insurance, freight charges, inspection charges, transportation, etc. complete including all labour, materials and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge.800mm Dia
4179.94
171
714769.74
... More
Providing and applying Black Bitumen coating outside of Ductile iron Pipes including all material, labour and machinery etc., complete, with all taxes, insurance, freight charges, inspection charges, transportation, etc. complete including all labour, materials and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge.900mm Dia
1727.09
171
295332.39
... More
Cleaning of chocked pipe line by diesel running vehicle mounted hydraulic operated high pressure suction cum jetting cleaning machine fitted with pump having 4000 litre suction capacity and 6000 litre water tank capacity including skilled operator supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of Pipe lines.Dechocking and flusing of sewer line from one manhole to another by high pressure jetting systemof 2200 PSI for Pipe line 400mm Dia
42
366
15391.74
... More
Cleaning of chocked pipe line by diesel running vehicle mounted hydraulic operated high pressure suction cum jetting cleaning machine fitted with pump having 4000 litre suction capacity and 6000 litre water tank capacity including skilled operator supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of Pipe lines.Dechocking and flusing of sewer line from one manhole to another by high pressure jetting systemof 2200 PSI for Pipe line 500mm Dia
84
458
38478.72
... More
Cleaning of chocked pipe line by diesel running vehicle mounted hydraulic operated high pressure suction cum jetting cleaning machine fitted with pump having 4000 litre suction capacity and 6000 litre water tank capacity including skilled operator supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of Pipe lines.Dechocking and flusing of sewer line from one manhole to another by high pressure jetting systemof 2200 PSI for Pipe line 600mm Dia
126
549
69262.2
... More
Cleaning of chocked pipe line by diesel running vehicle mounted hydraulic operated high pressure suction cum jetting cleaning machine fitted with pump having 4000 litre suction capacity and 6000 litre water tank capacity including skilled operator supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of Pipe lines.Dechocking and flusing of sewer line from one manhole to another by high pressure jetting systemof 2200 PSI for Pipe line 700mm Dia
42
641
26935.44
... More
Cleaning of chocked pipe line by diesel running vehicle mounted hydraulic operated high pressure suction cum jetting cleaning machine fitted with pump having 4000 litre suction capacity and 6000 litre water tank capacity including skilled operator supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of Pipe lines.Dechocking and flusing of sewer line from one manhole to another by high pressure jetting systemof 2200 PSI for Pipe line 1600mm Dia
1276
1465
1870450.12
... More
Conducting Hydralic field test pressure for all types of pipelines and all dia's with required pressure including all machineary ,materials & manpower transportation of Water etc all complete etc., as per specification and to the satisfaction of Engineer-in-charge.300mm Dia
42
23
997.92
... More
Conducting Hydralic field test pressure for all types of pipelines and all dia's with required pressure including all machineary ,materials & manpower transportation of Water etc all complete etc., as per specification and to the satisfaction of Engineer-in-charge.500mm Dia
84
39
3326.4
... More
Conducting Hydralic field test pressure for all types of pipelines and all dia's with required pressure including all machineary ,materials & manpower transportation of Water etc all complete etc., as per specification and to the satisfaction of Engineer-in-charge.600mm Dia
126
47
5987.52
... More
Conducting Hydralic field test pressure for all types of pipelines and all dia's with required pressure including all machineary ,materials & manpower transportation of Water etc all complete etc., as per specification and to the satisfaction of Engineer-in-charge.800mm Dia
216
63
13685.76
... More
Conducting Hydralic field test pressure for all types of pipelines and all dia's with required pressure including all machineary ,materials & manpower transportation of Water etc all complete etc., as per specification and to the satisfaction of Engineer-in-charge.16000mm Dia
1276
126
161694.72
... More
Ultrasonic Test for MS Pipe Welded Joints for retrofitting works
107
250
26750
... More
Radiographic Test for MS Pipe Welded Joints (15x3 inch) for retrofitting works
1411.66
125
176457.5
... More
Providing and applying Black Bitumen coating Outside of Ductile iron Pipes including all material and labour and machinery etc., complete, with all taxes, insurance, freight charges, inspection charges, transportation, etc. complete including all labour, materials and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge.100mm Dia
194.14
171
33197.94
... More
Providing and applying Black Bitumen coating Outside of Ductile iron Pipes including all material and labour and machinery etc., complete, with all taxes, insurance, freight charges, inspection charges, transportation, etc. complete including all labour, materials and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge.150mm Dia
320.69
171
54837.99
... More
Providing and applying Black Bitumen coating Outside of Ductile iron Pipes including all material and labour and machinery etc., complete, with all taxes, insurance, freight charges, inspection charges, transportation, etc. complete including all labour, materials and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge.250mm Dia
119.53
171
20439.63
... More
Providing and applying Black Bitumen coating Outside of Ductile iron Pipes including all material and labour and machinery etc., complete, with all taxes, insurance, freight charges, inspection charges, transportation, etc. complete including all labour, materials and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge.300mm Dia
120.25
171
20562.75
... More
Providing and applying Black Bitumen coating Outside of Ductile iron Pipes including all material and labour and machinery etc., complete, with all taxes, insurance, freight charges, inspection charges, transportation, etc. complete including all labour, materials and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge.400mm Dia
1208.08
171
206581.68
... More
Cleaning and chocked pipe line by diesel running vehicle mounted hydraulic operated high pressure suction cum jetting cleaning machine fitted with pump having 4000 litre suction capacity and 6000 litre water tank capacity including skilled operator supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of Pipe lines. Dechocking and flusing of sewer line from one manhole to another by high pressure jetting systemof 2200 PSI for Pipe line 100mm Dia
194.2
122
23723.47
... More
Cleaning and chocked pipe line by diesel running vehicle mounted hydraulic operated high pressure suction cum jetting cleaning machine fitted with pump having 4000 litre suction capacity and 6000 litre water tank capacity including skilled operator supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of Pipe lines. Dechocking and flusing of sewer line from one manhole to another by high pressure jetting systemof 2200 PSI for Pipe line 150mm Dia
63.5
274
17452.98
... More
Cleaning and chocked pipe line by diesel running vehicle mounted hydraulic operated high pressure suction cum jetting cleaning machine fitted with pump having 4000 litre suction capacity and 6000 litre water tank capacity including skilled operator supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of Pipe lines. Dechocking and flusing of sewer line from one manhole to another by high pressure jetting systemof 2200 PSI for Pipe line 200mm Dia
67
274
18414.95
... More
Cleaning and chocked pipe line by diesel running vehicle mounted hydraulic operated high pressure suction cum jetting cleaning machine fitted with pump having 4000 litre suction capacity and 6000 litre water tank capacity including skilled operator supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of Pipe lines. Dechocking and flusing of sewer line from one manhole to another by high pressure jetting systemof 2200 PSI for Pipe line 400mm Dia
124
366
45442.28
... More
Conducting Hydralic field test pressure for all types of pipelines and all dia's with required pressure including all machineary, materials & manpower transportation of Water all complete etc., as per specification and to the satisfaction of Engineer-in-charge.100mm Dia
194.2
7
1538.06
... More
Conducting Hydralic field test pressure for all types of pipelines and all dia's with required pressure including all machineary, materials & manpower transportation of Water all complete etc., as per specification and to the satisfaction of Engineer-in-charge.150mm Dia
63.5
11
754.38
... More
Conducting Hydralic field test pressure for all types of pipelines and all dia's with required pressure including all machineary, materials & manpower transportation of Water all complete etc., as per specification and to the satisfaction of Engineer-in-charge.200mm Dia
67
15
1061.28
... More
Conducting Hydralic field test pressure for all types of pipelines and all dia's with required pressure including all machineary, materials & manpower transportation of Water all complete etc., as per specification and to the satisfaction of Engineer-in-charge.400mm Dia
124
31
3928.32
... More
Cleaning rubbish, sludge, weeds scum, liquid earth, mud etc. from box drain / covered nikashi etc. by mathor labour after removing concrete slab / manhole cover etc. without damaging the same and refixing the same properly after cleaning as necessary and removing the sludge etc. by using iron pans, buckets including all labour, tools & plants including expulsion of impure / inflammable / asphyxiating gases from the drains etc. and removing the spoils in dry condition and disposing the same by truck beyond the area of Municipal Corporation / Municipality / Notified Area Authority / Industrial Township Authority etc. for such disposal including the cost of loading, unloading, transportation and making arrangement of necessary land for disposal, spreading and leveling as necessary etc. and cleaning the road side in all respects, complete as per direction of the Engineer- in-Charge. (Land for disposal to bearranged by the contractor).Power MV Manholes
1700.02
882
1500403.65
... More
Cleaning of chocked pipe line by diesel running vehicle mounted hydraulic operated high pressure suction cum jetting cleaning machine fitted with pump having 4000 litre suction capacity and 6000 litre water tank capacity including skilled operator supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of Pipe lines.Dechocking and flusing of sewer line from one manhole to another by high pressure jetting systemof 2200 PSI for Pipe line 225mm Dia
37468.68
274
10298266.7
... More
Demolition of RCC Work including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead
500
3948
1974260
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete including Taxes
500
115
57565
... More
Cleaning of reinforcement from rust from the reinforcement bars to give it as total rust free steel surface by using alkaline rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry,all complete as per direction of Engineer in charge Bars upto 10mm Dia
1000
5
5600
... More
Cleaning of reinforcement from rust from the reinforcement bars to give it as total rust free steel surface by using alkaline rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry,all complete as per direction of Engineer in charge Bars upto 12mm Dia
1000
7
7470
... More
Cleaning of reinforcement from rust from the reinforcement bars to give it as total rust free steel surface by using alkaline rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry,all complete as per direction of Engineer in charge Bars above 16mm Dia
1000
9
9340
... More
Specialised Injection Grouting with Cement and Free Flow Additives includes Drilling of holes with power drilling machine to the required depth [12mm to 14mm dia holes], Fixing of Rubber Nozzles with cement and quick setting, Rapid hardening compound putty - Rapidstrong qs or equivalent.Grouting of holes with 140 PSI Grout pump with cement slurry mixing with Specialized Free flow, Non-shrink Grout additive - 250 Grams per bag of 50 Kgs Cement add required water to make slurry form.After completion of grouting, Remove the Rubber nozzles e]. Later sealing of the hole with polymer cement putty .
100
196
19655
... More
Ultrasonic Pulse Velocity Tests Conducting Ultrasonic Pulse Velocity Tests on the Concrete Slab for retrofitting works
100
600
60000
... More
Rebound Hammer Test Conducting Rebound Hammer Test the concrete Surface for retrofitting works
100
500
50000
... More
Cleaning rubbish, sludge, weeds scum, liquid earth, mud etc. from box drain / covered nikashi etc. by mathor labour after removing concrete slab / manhole cover etc. without damaging the same and refixing the same properly after cleaning as necessary and removing the sludge etc. by using iron pans, buckets including all labour, tools & plants including expulsion of impure / inflammable / asphyxiating gases from the drains etc. and removing the spoils in dry condition and disposing the same by truck beyond the area of Municipal Corporation / Municipality / Notified Area Authority / Industrial Township Authority etc. for such disposal including the cost of loading, unloading, transportation and making arrangement of necessary land for disposal, spreading and leveling as necessary etc. and cleaning the road side in all respects, complete as per direction of the Engineer- in-Charge. (Land for disposal to bearranged by the contractor).Power MV Manholes & Duct
3100.03
882
2736024.48
... More
Demolition of RCC Work including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead
1000
3948
3948520
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete including Taxes
1000
115
115130
... More
Cleaning of reinforcement from rust from the reinforcement bars to give it as total rust free steel surface by using alkaline rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry,all complete as per direction of Engineer in charge 10mm Dia
1000
5
5600
... More
Cleaning of reinforcement from rust from the reinforcement bars to give it as total rust free steel surface by using alkaline rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry,all complete as per direction of Engineer in charge 12mm Dia
1000
7
7470
... More
Cleaning of reinforcement from rust from the reinforcement bars to give it as total rust free steel surface by using alkaline rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry,all complete as per direction of Engineer in charge 16mm Dia
1000
9
9340
... More
Cleaning of reinforcement from rust from the reinforcement bars to give it as total rust free steel surface by using alkaline rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry,all complete as per direction of Engineer in charge 20mm Dia
1000
11
11210
... More
Specialised Injection Grouting with Cement and Free Flow Additives includes Drilling of holes with power drilling machine to the required depth [12mm to 14mm dia holes], Fixing of Rubber Nozzles with cement and quick setting, Rapid hardening compound putty - Rapidstrong qs or equivalent.Grouting of holes with 140 PSI Grout pump with cement slurry mixing with Specialized Free flow, Non-shrink Grout additive - 250 Grams per bag of 50 Kgs Cement add required water to make slurry form.After completion of grouting, Remove the Rubber nozzles e]. Later sealing of the hole with polymer cement putty .
50
196
9827.5
... More
Ultrasonic Pulse Velocity Tests Conducting Ultrasonic Pulse Velocity Tests on the Concrete Slab for retrofitting works
100
600
60000
... More
Rebound Hammer Test Conducting Rebound Hammer Test the concrete Surface for retrofitting works
100
500
50000
... More
Supply and delivery of Class SN8 Double wall corrugated (external annualcorrugated & smooth internal wall) (DWC)piping system in accordance with IS 16098 (part 2) and conveying to worksite, , including loading and unloading at both destinations and cuts of pipes wherever neccessary as directed by the Engineer-in-charge.200mm Dia coupler
100
602
60216
... More
Supply and delivery of Class SN8 Double wall corrugated (external annualcorrugated & smooth internal wall) (DWC)piping system in accordance with IS 16098 (part 2) and conveying to worksite, , including loading and unloading at both destinations and cuts of pipes wherever neccessary as directed by the Engineer-in-charge.250mm Dia coupler
100
937
93732
... More
Manufacture, supply, & delivery of fittings & accessories compatible with DWC pipe - non smooth External Annular Corrugated and smooth Internal Surfaces (Double Wall) for non-pressure or similar type of class SN8 Structured Wall polythelene piping systems including transportation to anywhere in A.P, excluding GST and other Government duties.200mm Dia coupler
50
240
12043
... More
Manufacture, supply, & delivery of fittings & accessories compatible with DWC pipe - non smooth External Annular Corrugated and smooth Internal Surfaces (Double Wall) for non-pressure or similar type of class SN8 Structured Wall polythelene piping systems including transportation to anywhere in A.P, excluding GST and other Government duties.250mm Dia coupler
50
1024
51240.5
... More
Providing and applying Black Bitumen coating Outside of Ductile iron Pipes including all material and labour and machinery etc., complete, with all taxes, insurance, freight charges, inspection charges, transportation, etc. complete including all labour, materials and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge.600mm Dia
277.58
171
47466.18
... More
Providing and applying Black Bitumen coating Outside of Ductile iron Pipes including all material and labour and machinery etc., complete, with all taxes, insurance, freight charges, inspection charges, transportation, etc. complete including all labour, materials and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge.800mm Dia
168.61
171
28832.31
... More
Providing and applying Black Bitumen coating Outside of Ductile iron Pipes including all material and labour and machinery etc., complete, with all taxes, insurance, freight charges, inspection charges, transportation, etc. complete including all labour, materials and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge.900
2217.99
171
379276.29
... More
Cleaning and Chocked Pipe line by diesel running vehicle mounted hydraulic operated high pressure suction cum jetting cleaning machine fitted with pump having 4000 litre suction capacity and 6000 litre water tank capacity including skilled operator supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of Pipe lines.Dechocking and flusing of sewer line from one manhole to another by high pressure jetting systemof 2200 PSI for Pipe line 200mm Dia
732
274
201190.2
... More
Cleaning and Chocked Pipe line by diesel running vehicle mounted hydraulic operated high pressure suction cum jetting cleaning machine fitted with pump having 4000 litre suction capacity and 6000 litre water tank capacity including skilled operator supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of Pipe lines.Dechocking and flusing of sewer line from one manhole to another by high pressure jetting systemof 2200 PSI for Pipe line 250mm Dia
324
274
89051.4
... More
Cleaning and Chocked Pipe line by diesel running vehicle mounted hydraulic operated high pressure suction cum jetting cleaning machine fitted with pump having 4000 litre suction capacity and 6000 litre water tank capacity including skilled operator supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of Pipe lines.Dechocking and flusing of sewer line from one manhole to another by high pressure jetting systemof 2200 PSI for Pipe line 300mm Dia
42
274
11543.7
... More
Cleaning and Chocked Pipe line by diesel running vehicle mounted hydraulic operated high pressure suction cum jetting cleaning machine fitted with pump having 4000 litre suction capacity and 6000 litre water tank capacity including skilled operator supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of Pipe lines.Dechocking and flusing of sewer line from one manhole to another by high pressure jetting systemof 2200 PSI for Pipe line 600mm Dia
270
549
148419
... More
Cleaning and Chocked Pipe line by diesel running vehicle mounted hydraulic operated high pressure suction cum jetting cleaning machine fitted with pump having 4000 litre suction capacity and 6000 litre water tank capacity including skilled operator supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of Pipe lines.Dechocking and flusing of sewer line from one manhole to another by high pressure jetting systemof 2200 PSI for Pipe line 700mm Dia
192
641
123133.44
... More
Cleaning and Chocked Pipe line by diesel running vehicle mounted hydraulic operated high pressure suction cum jetting cleaning machine fitted with pump having 4000 litre suction capacity and 6000 litre water tank capacity including skilled operator supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of Pipe lines.Dechocking and flusing of sewer line from one manhole to another by high pressure jetting systemof 2200 PSI for Pipe line 800mm Dia
347
732
254326.71
... More
Cleaning and Chocked Pipe line by diesel running vehicle mounted hydraulic operated high pressure suction cum jetting cleaning machine fitted with pump having 4000 litre suction capacity and 6000 litre water tank capacity including skilled operator supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of Pipe lines.Dechocking and flusing of sewer line from one manhole to another by high pressure jetting systemof 2200 PSI for Pipe line 900mm Dia
277
824
228400.35
... More
Conducting Hydralic field test pressure for all types of pipelines and all dia's with required pressure including all machineary ,materials & manpower transportation of Water all complete etc., as per specification and to the satisfaction of Engineer-in-charge.600mm Dia
270
47
12830.4
... More
Conducting Hydralic field test pressure for all types of pipelines and all dia's with required pressure including all machineary ,materials & manpower transportation of Water all complete etc., as per specification and to the satisfaction of Engineer-in-charge.700mm Dia
192
55
10644.48
... More
Conducting Hydralic field test pressure for all types of pipelines and all dia's with required pressure including all machineary ,materials & manpower transportation of Water all complete etc., as per specification and to the satisfaction of Engineer-in-charge.800mm Dia
347
63
21985.92
... More
Conducting Hydralic field test pressure for all types of pipelines and all dia's with required pressure including all machineary ,materials & manpower transportation of Water all complete etc., as per specification and to the satisfaction of Engineer-in-charge.900mm Dia
277
71
19744.56
... More
Supply, of 7- Way 40mm Multi Ducts with Silicore Lubricant inner layer for ICT fibre cables comforming to ASTMF 2160 and /or equivalent indian standard as per drawings and technical specifications and as directed by the Engineer - in - charge.
5472.08
1085
5937316.24
... More
Bailing out water from the pipe line trenches with Electric Driven pump set including hire charges, current charges and wages for Driver and Helper up to 5HP capacity pumps.Considering 10 Hp Motor
1000
411
411390
... More
Bailing out water from the pipe line trenches with Electric Driven pump set including hire charges, current charges and wages for Driver and Helper up to 5HP capacity pumps.Considering 20 Hp Motor
1000
540
540790
... More
Bailing out water from the pipe line trenches with oil engine driven pump sets, including hire charges, fuel charges and wages for Driver and Helper up to 10HP capacity pumps.r
1000
676
676480
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 2 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete and as directed by Engineer-in-charge
1500
60
90660
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 3 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete and as directed by Engineer-in-charge
10071.16
80
811634.78
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 4 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete and as directed by Engineer-in-charge
1000
97
97860
... More
Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) (ex-works) Excluding Transportation and all Taxes.
Mechanical Joints Up to 300 mm dia.
2500
154
385050
... More
Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) (ex-works) Excluding Transportation and all Taxes.
Mechanical Joints Above 300 mm dia.
2500
169
424550
... More
Earthwork in excavation as per technical specifications Clause 305.1 including setting out, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHa) 0.0 m To 3.0 m Depth Earthwork for Temporary Channel Dewatering
24991.84
133
3343158.44
... More
Providing & laying Sand filling in trenches including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge. Replacement of Sand for stabilization on Loose Soil
5000
481
2405250
... More
Spreading and Sectioning of Surplus Earth/Carted Earth in refilling trenches to required grade and levels as directed by Engineering in-Charge
30000
20
613500
... More
Drilling of the 14 mm dia hole up to embedment depth of 120 mm after that cleaning the hole and inject the HILTI HY 200R chemical and fixing the 12 mm Rebar as per standards
100
80
8000
... More
Drilling of the 20 mm dia hole up to embedment depth of 160 mm after that cleaning the hole and inject the HILTI HY 200R chemical and fixing the 16 mm Rebar as per standards.
100
95
9500
... More
Drilling of the 25 mm dia hole up to embedment depth of 200 mm after that cleaning the hole and inject the HILTI HY 200R chemical and fixing the 20 mm Rebar as per standards.
100
300
30000
... More
Drilling of the 32 mm dia hole up to embedment depth of 250 mm after that cleaning the hole and inject the HILTI HY 200R chemical and fixing the 25 mm Rebar as per standards.
80
475
38000
... More
Environmental and Social Management Plan as per World Bank norms and guidelines including cost of all materials, machinery, labour, all operations for finished item of work, as directed by Engineer in Charge
1
41580689
41580689.52
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%