Amaravati Development Corporation Limited Tender
... More
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Amaravati Development Corporation Limited - ADCL Tender
Bridge Construction
Civil And Construction
Road Construction
Drainage Work
Pipe Line Project
Civil And Architectural Services
Water Storage And Supply
Furnitures and Fixtures
Opening Date15 Feb 2025
Closing Date3 Mar 2025
Tender Amount₹ 2,45,44,64,743
Costs
EMD
₹ 2,45,44,647Document Cost
Refer DocumentsTender Fee
₹ 20,000
Summary
Construction Of Balance Smart Trunk Infrastructure With Roads, Storm Water Drains, Water Supply Network,
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
786105Tender No
330/ADCL/IPD/2024-25Tender Authority
Amaravati Development Corporation Limited ViewPurchaser Address
-Website
http://http://ccdmc.co.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Forming Subgrade with borrowed useful earth from outside road boundary by mechanical means with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soil on the embankment, spreading soil, breaking clods, sectioning, grading and consolidation with 8 to 10 Tonnes Vibratory Road Roller @ OMC to meet requirement of table 300-1 & 300-2 of MoRT&H, including all hire and operational charges of T&P , etc., complete for finished item of work as per MoRT&H specification 305 (5th Revision) , satisfying the Free Swell Index value less than 50%, soaked CBR value not less than 8% and other reqirements from clause 305 (5th Revision) and as directed by the Engineer in Charge.
104157.89
1443
150384203.16
... More
Filling of Median / Island with excavated material deposited at site from roadway cutting and excavation for drain and foundation of other structures, spread, graded and compacted with Plate compactor as per drawing, Technical Specifications Clause 408 (5th Revision) with all leads and lifts complete for finished item of work and as directed by the Engineer in Charge
9313.6
381
3552765.86
... More
Filling of Median / Island with approved material obtained from selected borrow source as per drawing, Technical Specifications Clause 408 (5th Revision) with selected borrowed useful earth from outside road boundary by mechanical means up to SDR with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soil on the embankment, spreading soil, breaking clods, sectioning and compacting to meet requirements including all hire and operational charges of T&P, etc, complete for finished item of work and as directed by the Engineer in Charge
9313.6
2016
18776869.55
... More
Loosening and Recompaction of Existing Ground up to a level of 500mm supporting Emabankment / Subgrade to the required compaction to meet the requirements of Table 300-2 of MoRTH, including all hire and operational charges of T&P etc., complete for finished item of work as per MoRT&H specification 305 (5th Revision) , and as directed by the Engineer in Charge .
1000
118
118800
... More
Construction of Granular sub-base by providing HBG material confirming to Grading - VI of MoRT&H Table 400-1 including cost and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavator / approved means at OMC and compacting with vibratory roller to achieve the desired density etc., complete for finished item of work as per MoRT&H Specification 401 (5th revision) and as directed by the Engineer-in-charge.
53723.26
2033
109251084.3
... More
Providing, Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem specification including cost of all materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in base courses on well prepared surface and compacting with Vibratory roller to acheive the desired density etc., as directed by the Engineer-in-Charge and as per MoRT&H specification 406 (5th revision) for finished item of work.
47191.06
2825
133315688.32
... More
Providing and applying prime coat with bitumen emulsion (SS-1) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.85 kg/sqm using mechanical means for finished item of work as per MoRT&H Specification 502 (5th Revision).
218237.19
77
16882829.02
... More
Providing and applying tack coat with bitumen Emulsion (RS-1) (Bulk) using Emulsion pressure distributor at the rate of 2.5 kg to 3.0 kg / 10 sqm over granular surface treated with primer cleaned with mechanical broom for finished item of work as per MoRT&H Specification 503 (5th revision) and as directed by the Engineer-in-Charge.
42104.2
16
695561.38
... More
Providing and applying tack coat with bitumen Emulsion (RS-1) (Bulk) using Emulsion pressure distributor at the rate of 2.0 to 3.0 kg /10 sqm over bituminous surface cleaned with mechanical broom for finished item of work as per MoRT&H Specification 503 (5th revision) and as directed by the Engineer-in-Charge.
325237.8
15
4979390.72
... More
Providing and laying of Dense Graded Bituminous Macadam with 100-120 TPH Batch type HMP Producing an average output of 75 tonne per hour using crushed aggregates of Grading - II as per table 500-10 of MoRT&H Specification 505 (5th revision) premixed with bitumen binder VG 40 grade @ 4.50% of weight of total mixture, transported to site, laid over a previously prepared surface with Hydrostatic paver finisher with sensor to the required grade, level and alignment and rolled with smooth wheeled, vibratory and tandem rollers as per Clauses 501.6 and 501.7 to achieve the desired compaction for finished item of work as directed by the Engineer-in-Charge including hire and operational charges all T&P and all other contingent charges necessary including cost of of all materials etc., complete as per MoRT&H specification No. 505 (5th revision)
18701.17
9810
183466519.2
... More
Providing Bituminous Concrete with 100-120 TPH Batch type hot mix plant producing an average output of 75 tonne per hour using HBG crushed aggregates of Grading-I as per table 500-17 of specification 507 of MoRT&H (5th Revision), premixed with bitumen binder VG-40 Grade @ 5.2 % of mix and filler, transporting the hot mix to work site, laying with Hydroststic paver finisher with sensor to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H Specification 507 (5th Revision) complete for finished item of work in all respects as directed by Engineer-in-Charge
8130.95
10964
89150419.01
... More
Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm Type-A aggregates using VG-30 grade bitumen @ 22 kg/10 sqm and colour pigment to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a Smooth wheeled roller 8-10 tonne capacity, and finishing to required level and grade as per MoRT&H Specification 508 (5th Revision) complete for finished item of work in all respects as directed by Engineer-in-Charge
40746
191
7808970.9
... More
Providing and constructing inlet chambers of 0.6mx0.6mx0.6m dimensions with RCC M25 grade of concrete for Raft and walls and M15 grade of concrete for Levelling Course, with galvanised gratings and PVC/HDPE pipe 150mm dia as per drawing and Technical Specifications Section 1500, 1600 & 1700 (5th Revision) and as directed by the Engineer in Charge.
906
11596
10506863.88
... More
Construction of Median chutes of clear size 0.25m width x 0.275m depth with 100mm Raft & walls as per fig 4.32 of IRC SP 42-2014 and Technical Specifications Section 1500, 1700 & 2100 (5th Revision) and as directed by the Engineer in Charge.
906
1853
1678908.6
... More
Providing and Laying Plain Cement Concrete M 20 kerb with top and bottom width 115 and 165mm respectively, 390mm high over WMM kerb stone laid with kerb laying machine as per drawing including cost, conveyance of all materials to site and labour charges etc complete as per Technical Specifications Clauses 409 and Section 1700 (5th Revision) and as directed by the Engineer in Charge.minimum quantity of 344 kg cement to be used per cum of concrete. -Grade M 20 for Kerb "A" Type Section over WMM
54988.48
290
15971404.02
... More
Providing and Laying Plain Cement Concrete M 20 kerb with top and bottom width 115 and 465mm respectively, 365mm over WMM kerb stone laid with kerb laying machine as per drawing including cost, conveyance of all materials to site and labour charges etc complete as per Technical Specifications Clauses 409 and Section 1700 (5th Revision) and as directed by the Engineer in Charge.minimum quantity of 344 kg cement to be used per cum of concrete. -Grade M 20 for Kerb "L" Type Section over WMM
13582
476
6475490.14
... More
Providing and Laying kerb painting with with two coats on the surface with synthetic enamel paint grade-I (IS:164) in all shades on new plastered concrete surfaces after back filling including cost, conveyance of all materials to site and labour charges etc complete as per drawing, Technical Specifications Clause 803 (5th Revision) and as directed by the Engineer in Charge
28423.73
131
3733172.7
... More
Construction of footpath/separator by providing 60mm paver blocks-M35 grade, 30mm sand fill below it including cost, conveyance of all materials to site and labour charges etc complete as per the technical specification of MoRTH& APDSS as per drawings and as directed by the Engineer -in- Charge
40746
761
31014225.36
... More
Supplying of hot applied thermoplastic road marking compound, 2.50mm thick including reflectorising glass beads @ 250gms with Reflectorising Glass beads on Bituminous surface at 250gms per Sqm area, thickness of 2.50mm is exclusive of surface applied glass bead as per MoRTH section 803.40 & IRC 35 -2015 , the material should be satisfy MoRTH specifications 803.40 and must comply with the following a) White index for the product should be in the range of 60-70 when measured against standard reference. The applied panel 7/8 number must be submitted for checking up the white index in the department lab .In case the department approves the white index box of any vendor, the department engineer may carryout random checking of the appplied products at site against the approved panel. In case of any major deviation, beyond acceptance limit, department reserve the right to cancel or reject the total supplied consignment of the said material and will compell the vendor has to replace the full consignment by the desired material as per approved panel at his own cost and additional demurrages may be claimed due to loss of man days (as per the rules of the department), b)The Luminance factor of the material should be in the range of 80-85% at 45 degrees centigrade as per AASTHOM 249. c) Crack resistance: The applied panel cured for 7 days under ambient condition and then should be tested as per BS3262 part-1, 1989 and should pass at the range of 0 degree centigrade to '-10 ' degree centigrade. D) Adhesion : Strong E) Softening point 102 degree centigrade F) Dried film finish : Smooth and uniform G) Night Vision: High as directed by the Engineer-in-Charge and confirming to IS 164-1961 (1st revision reaffirmed in 1986) and clause conforming to IRC 35-2015 & MoRTH section 803.4-Lane / Center line / Edge marking / Transverse marking and any other marking
7404.45
560
4146492
... More
Supplying of hot applied thermoplastic road marking compound, 2.50mm thick including reflectorising glass beads @ 250gms with Reflectorising Glass beads on Bituminous surface at 250gms per Sqm area, thickness of 2.50mm is exclusive of surface applied glass bead as per MoRTH section 803.40 & IRC 35 -2015 , the material should be satisfy MoRTH specifications 803.40 and must comply with the following a) White index for the product should be in the range of 60-70 when measured against standard reference. The applied panel 7/8 number must be submitted for checking up the white index in the department lab .In case the department approves the white index box of any vendor, the department engineer may carryout random checking of the appplied products at site against the approved panel. In case of any major deviation, beyond acceptance limit, department reserve the right to cancel or reject the total supplied consignment of the said material and will compell the vendor has to replace the full consignment by the desired material as per approved panel at his own cost and additional demurrages may be claimed due to loss of man days (as per the rules of the department), b)The Luminance factor of the material should be in the range of 80-85% at 45 degrees centigrade as per AASTHOM 249. c) Crack resistance: The applied panel cured for 7 days under ambient condition and then should be tested as per BS3262 part-1, 1989 and should pass at the range of 0 degree centigrade to '-10 ' degree centigrade. D) Adhesion : Strong E) Softening point 102 degree centigrade F) Dried film finish : Smooth and uniform G) Night Vision: High as directed by the Engineer-in-Charge and confirming to IS 164-1961 (1st revision reaffirmed in 1986) and clause conforming to IRC 35-2015 & MoRTH section 803.4-Directional Arrows, Lettering etc. as per drawing No.61 of MORTH Type Designs for Intersections
10
560
5600
... More
Supplying of hot applied thermoplastic road marking compound, 2.50mm thick including reflectorising glass beads @ 250gms with Reflectorising Glass beads on Bituminous surface at 250gms per Sqm area, thickness of 2.50mm is exclusive of surface applied glass bead as per MoRTH section 803.40 & IRC 35 -2015 , the material should be satisfy MoRTH specifications 803.40 and must comply with the following a) White index for the product should be in the range of 60-70 when measured against standard reference. The applied panel 7/8 number must be submitted for checking up the white index in the department lab .In case the department approves the white index box of any vendor, the department engineer may carryout random checking of the appplied products at site against the approved panel. In case of any major deviation, beyond acceptance limit, department reserve the right to cancel or reject the total supplied consignment of the said material and will compell the vendor has to replace the full consignment by the desired material as per approved panel at his own cost and additional demurrages may be claimed due to loss of man days (as per the rules of the department), b)The Luminance factor of the material should be in the range of 80-85% at 45 degrees centigrade as per AASTHOM 249. c) Crack resistance: The applied panel cured for 7 days under ambient condition and then should be tested as per BS3262 part-1, 1989 and should pass at the range of 0 degree centigrade to '-10 ' degree centigrade. D) Adhesion : Strong E) Softening point 102 degree centigrade F) Dried film finish : Smooth and uniform G) Night Vision: High as directed by the Engineer-in-Charge and confirming to IS 164-1961 (1st revision reaffirmed in 1986) and clause conforming to IRC 35-2015 & MoRTH section 803.4-Pedestrian Crossing at junctions and median openings
324
560
181440
... More
Providing and fixing Village name board size 600x800 mm made out of Type – XI of ASTMD 4956-09 wide angle cube cornered micro Prismatic Retro reflective sheeting and confirming to IRC 67:2012 for full background of Green Colour & White Letters and fixed over 3MM Alluminium Composite Material sheet having minimum 0.30mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back support frame of M.S angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 m from the ground level to the bottom of the board. The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of height. The signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials ,equipment, machinery and labour with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by Engineer –in-Charge.
4
8236
32944
... More
Providing & fixing junction boards of size 1500 x 1200 mm made out of Type – XI of ASTMD 4956-09 wide angle cube cornered micro Prismatic Retro reflective sheeting and confirming to IRC 67:2012 for full background of Green Colour & White Letters and fixed over 4MM Alluminium Composite Material sheet having minimum 0.5 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back support frame of M.S angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 m from the ground level to the bottom of the board. The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of height. The signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials ,equipment, machinery and labour with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by Engineer -in-Charge.
12
29525
354300
... More
Providing and fixing of Route marker signs (450mm x 600mm) as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing
24
2589
62141.52
... More
Providing and fixing Cautionary / Warning sign boards size 900 mm equilateral triangle made out of Type – XI of ASTMD 4956-09 wide angle cube cornered micro Prismatic Retro reflective sheeting and confirming to IRC 67:2012 for full background of White colour and letters/logos done by screen printing in Black colour, boarders by screen printing in Red colour and fixed over 4MM Aluminium Composite Material sheet having minimum 0.5 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back support frame of M.S angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 m from the ground level to the bottom of the board. The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of height. The signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials ,equipment, machinery and labour with all leads and lift, loading chages necessary for satisfactory completion of the work as directed by Engineer -in-Charge.
4
6958
27832
... More
Providing and fixing Mandatory / Regulatory sign boards size 900 mm circle made out of Type – XI of ASTMD 4956-09 wide angle cube cornered micro Prismatic Retro reflective sheeting and confirming to IRC 67:2012 for full background of White colour and letters/logos done by screen printing in Black colour, boarders by screen printing in Red colour and fixed over 4MM Aluminium Composite Material sheet having minimum 0.5 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back support frame of M.S angle 25x25x3mm all roundand fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 m from the ground levelto the bottom of the board. The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of height. The Signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials ,equipment, machinery and labour with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by Engineer -in-Charge.
4
10231
40924
... More
Stop sign - Octagon of size 1200 mm complete including cost and conveyance of all materials ,equipment, machinery and labour with all leads and lift, loading chages necessary for satisfactory completion of the work as per drawings, Technical Specifications Clause No. 801 (5th Revision) and as directed by the Engineer in Charge
6
3029
18179.04
... More
Providing and fixing Mandatory (Give way sign) sign boards size 900 mm equilateral triangle made out of Type – XI of ASTMD 4956-09 wide angle cube cornered micro Prismatic Retro reflective sheeting and confirming to IRC 67:2012 for full background of White colour and letters/logos done by screen printing in Black colour, boarders by screen printing in Red colour and fixed over 4MM Aluminium Composite Material sheet having minimum 0.5 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back support frame of M.S angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 m from the ground level to the bottom of the board. The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of height. The signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials ,equipment, machinery and labour with all leads and lift, loading chages necessary for satisfactory completion of the work as directed by Engineer -in-Charge.
6
6958
41748
... More
Supplying and installation of delineators (Roadway indicators) not less than 800mm high above ground level. The delineator shall have a core and shell construction which shall be made of tough, high impact resistant, injection-molded, thermoplastic outer body. The inner core shall consist of powder coated or painted Mild steel of minimum thickness 1.0mm. The delineator should have top retro-reflective unit consisting of white color micro prismatic non metallic retro-reflective sheeting of minimum exposed area of 125 cm2 and bottom retro-reflective unit consisting of red color micro prismatic non metallic retro-reflective sheeting of minimum exposed area of 35 cm2 confirming to ASTM D4956 type XI standards and as per IRC -79. The delineators shall be fixed to the ground by inserting the root of the delineator up to the marked portion and by firm concrete filling as per the instructions by engineer in-charge.
23
2048
47104
... More
Providing and fixing Object markers 48.3mmdia. MS pipe ,keep at 50cm above ground level with 3MM Alluminium Composite Material sheet having minimum 0.30 mm thick Aluminium skin fully covered with type XI of wide angle cube cornered micro Prismatic Retro reflective sheeting and confirming to IRC 67:2012 reflective sheeting fixed in to trench of 30x30x30cm filled with CC M20 conforming to IRC-67:2012 & MORTH&H specification no 805 and approved drawing etc.,
24
1021
24504
... More
Providing and fixing of Moulded Shanks Raised Pavement Markers made of Polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lense face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 TypeH and complying to specifications of Category A of MORTH circular No.RW/NH-33023/10/97 - DO III dt. 11-o6-1997. The height, width and length shall not exceed 50mm, 100mm and with minimum reflecting area of 13 sqcm on each side and the slope to the base shall be 35 +/- 5 degrees The strength of detachment of the integrated cylindrical shanks (of diameter not less than 19 +/- 2mm and height not less than 30 +/- 2mm) from the body is to be a minimum values of 700kgs. Fixing will be by drilling holes on the road for the twin shanks to go inside without nails and using epoxy resign based adhesive as per manufacturers recommendation and complete as directed bythe Engineer.
7443
336
2500848
... More
Clearing the light Jungle like Shrub, bushes, grass, wild vegetation and it including all operational, incidental, labour charges, required tools, overheads & contractors profit complete for finished item of work
29880.4
3
95019.67
... More
Aliliment and fixing planting point with 0.45 mtr length sticks incl mateal cost, transport and overheads and contractor propit complte for finised work (Tall Plants)
4360
1
7935.2
... More
Earth work excavation for foundations Digging of pits for plant in ordinary soils 0.90x0.90x0.90 mtr (Tall Plants)
4360
155
675800
... More
Filling with Red soil (Red soil in this context it is defirn:;g as sandy
As per loamy garden soil congenial for plant growth which shall be of light textured, crystalline, porous and friable;·fertile, slightly acidic·:or neutral)in pits/trenches and including cost and conveyance of red s /1' to work
site and it including all operational, incidental ,labour charges, required tools, overheads & contractors profit complete for finished item of work. (60% of the pit size for Central median Plantation (0.342 cub/pit) excluding ball of earth )
4360
427
1863900
... More
Cost and Conveyance of Farm Yard Manure or dry cow dung powder including loading, unloading, internal transport and application. of the FYM into the pits/trenches and it including all operational, incidental,labour charges, required tools, overheads & contractors propit complete for finished item of work. (0.028 cum mtr farm yard Manure for each. pit'.) Rs.1761 for cubic (Tall Plants)
4360
49
213901.6
... More
Conveyance charges for internal transprot upto 100 mt with head load and application of the red soil and FYM into the pit and it including all operational, incidental ,labour charges, required tools, overheads & contractors profit complete for finished item of work. (0.37 cubic per pit)
4360
48
210631.6
... More
Transport of 21''x21'' size bag plants from Nursery to Plantation site including loading and unloading 10 km lead
4360
31
136729.6
... More
Internal transportation of larger bag size 21''x21'' for 100 no. of plants
4360
16
72812
... More
Planting of bag plants 21''x21'' size @ 5145.61/100 no.
4360
51
224365.6
... More
Hedge / shrub planting: Digging the trench of size 0.15 mtrs. depth, refilling with red garden soil including cost of red garden soil and farmyard manure at 4:1 ratio, internal transportation of plants, planting etc., including the application of fertilizers and pesticides etc., (@ 20 gms/pit/sqmt) and it including all operational, incidental, labour charges, required tools, overheads & contractors profit complete for finished item of work, but excluding the cost of the fertilizers (@ 20 gms/pit/sqmt) and plant material etc., - unit 1 Sqmt of work. (* 10 No./Sqm of plants & bag size shall be arrived based on the spacing 0.30 c/c as per the design.)
(Red garden soil in this context it is defined as sandy loamy garden soil congenial for plant growth which shall be of light textured, crystalline, porous and friable, fertile, slightly acidic or neutral)
27164.4
329
8944965.28
... More
Provision for Transportation of 21" x 21" bag size (30 kg/bag) 3538 Nos
106.14
1000
106140
... More
Provision for Transportation of 7" x 8" bag size (2 kg/bag) 271644 Nos
543.29
1000
543290
... More
Cost of Veitcia merrilli golden (21"x21") / Equivalent Plant.
2716
1800
4888800
... More
Cost of (Tabebuia rosea ) (21"x21") / Equivalent Plants
411
350
143850
... More
Cost of (Ficus religiosa) (21"x21") / Equivalent Plants
411
375
154125
... More
Cost of ( Azadirachta indica ) (21"x21") /Equivalent Plants
411
400
164400
... More
Cost of (Millingtonia hortensis ) (21"x21") /Equivalent Plants
411
400
164400
... More
Cost of Leucophillum (7"x8") / Equivalent Plants
271644
22
5976168
... More
Maintenance of Palms/Tree planting: Trimming (once in month) and application of fertilizers, insecticides, Fungicides @ 20 gms/pit/sqmt) (once in quarterly) by manually excluding cost of fertilizers, it including all operational, incidental ,labour charges, for complete of work. (Once in 3 months i.e 4 times in a Year 4360 Nos x 4 = 17440 Nos)
17440
6
120336
... More
Maintenance of hedge/shrub planting: Trimming of hedges/shrubs (once in 30 days) and application of fertilizers, insecticides, Fungicides (once in a month @ 20 gms/pit/sqmt) etc., by manually excluding cost of fertilizers it including all operational, incidental, labour charges, for complete of work. (Once in 3 months i.e 4 times in a Year 27164.4 Sqm x 4 = 108658 Sqm )
108658
6
692151.46
... More
Hire charges of tractor mounted water tanker for filling sump by 5000 ltrscapacity tanker(150 waterings for oneyear ie. once in a three days @ 5litres per sqm/plantper each time)and it including·all operational, incidental,labourcharges,requiredtools,overheads&contractors profit complete for finished item of work
5136
691
3549951.84
... More
watch and ward 6 member per month for 12 months = 72 member
60
15000
900000
... More
Supply and delivery of 19:19:19 fertilizer 4 times each time 20 gms / Sqm (Once in 3 months i.e 4 times in a Year ( 4360 Nos x 4 x 20 gms)/1000/50 = 7 Bags &
(Once in 3 months i.e 4 times in a Year ( 29880.4 Sqm x 4 x 20 gms)/1000/50 = 48 Bags
55
1800
99000
... More
Foundation and erection charges with special T&P, for 10Mtrs long Octagonal / Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.60Mtr x 0.60Mtrs x 1.40 Mtr size M20 cc work vibrated concreting mixing with necessary steel (15kgs) reinforcement and curing for 7 days as directed by the field engineers during execution including excavation of Earth/BT all labour charges and cost and conveyance of materials etc., complete.
454
8908
4044481.7
... More
Foundation and erection charges with special T&P, for 4 Mtrs long pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.45Mtr x 0.45Mtrs x1.20 Mtr size M20 cc work vibrated concreting mixing with necessary steel (10kgs) reinforcement and curing for 7 days as directed by the field engineers during execution including excavation of Earth/BT all labour charges and cost
and conveyance of materials etc., complete.
906
6613
5991858.18
... More
Fabrication, Transportation and supply of hot-dip galvanized Octagonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with hinged door opening arrangement, including the supply of suitable boards with bakelite sheet as per IS specification suitable to withstand the wind speed of 180 KMPH for 10 Mtrs height Pole having dimensions Bottom 175 mm,. Top 70mm with 3mm thick, base plate 275 x 275 x16mm and 4 Nos of M24 x 750 long 'J' bolts along with template including Fabrication, Transportation and supply of 1.5 Mtr length double arm suitable size decorative galvanized bracket with PU paint colour finish etc complete. (The design should be approved from field Engineers) for finished item of work as directed by Engineer in charge. Make for Pole :Bajaj /Valmont /Laasma/ Transrail/Utkarsh/Skipper/Consoul /Surya/Vakrangee/Lysaght Pole
454
37162
16871697.82
... More
Supply, Transporation, installation, testing and commissioning of LED decorative post top of 45W with a system lumen output of 4950 lumens and a minimum system efficiancy of 110lm/W with street light optics. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. the luminaire should have a color temperature of 5700K and CRI70. The luminare shall meet IP66 with THD10% and PF0.9, IK08 protection. The luminaire shall hav eclosed diffused optics with polycarbonate diffuser board. the total power consumption should not exceed 45W (including driver) with glass reinforced polymer (GRP) composite type Conical pole of height 4 mtr including decorative base plate and internal junction box including labour charges etc., complete and as directed by the departmental authorities. Makes:Klite/Phillips/Reytek/lightman or equivalent. Design, model shall be as approved by the departmental authorities
906
39600
35877600
... More
Supply, transportation and fixing of LED Street light Luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass/polycarbonate diffuser, supply input voltage 120 - 270V AC, P.F 0.90, high power LEDs having System Efficacy = 120 lumens/watt and junction temperature 70°C, with Ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5/Sec-3), driver surge protection 4KV, in-house additional Surge protection 10 KV with optics distribution, THD10% at 110 Volts AC, driver efficiency 90%, CCT: 3000K - 5700K, minimum CRI70, etc., complete with earth connection and not less than two years warranty. a) Luminaire Make : Wipro(Skyline) / Philips (Greenline Extra) / GE- Venture / Crompton(Nexus / Hawk series) / Bajaj (Edge) / Halonix (Modular/ Lumos-Super) / Havells (Endura Series)/Greenlites(HI-Lux) /Capart(Premium)/Polycab/Keselec / HPL(City Vision)/Jaquar (Premium) /Eveready /Surya (Pollux) / Fortune Arrt (Leaf) / Rhino(GPSL06) b) LED MAKE :PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG. - 180W LED Fixture
454
13931
6324982.72
... More
Supply, transportation and fixing of LED Street light Luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass/polycarbonate diffuser, supply input voltage 120 - 270V AC, P.F 0.90, high power LEDs having System Efficacy = 120 lumens/watt and junction temperature 70°C, with Ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5/Sec-3), driver surge protection 4KV, in-house additional Surge protection 10 KV with optics distribution, THD10% at 110 Volts AC, driver efficiency 90%, CCT: 3000K - 5700K, minimum CRI70, etc., complete with earth connection and not less than two years warranty. a) Luminaire Make : Wipro(Skyline) / Philips (Greenline Extra) / GE- Venture / Crompton(Nexus / Hawk series) / Bajaj (Edge) / Halonix (Modular/ Lumos-Super) / Havells (Endura Series)/Greenlites(HI-Lux) /Capart(Premium)/Polycab/Keselec / HPL(City Vision)/Jaquar (Premium) /Eveready /Surya (Pollux) / Fortune Arrt (Leaf) / Rhino(GPSL06) b) LED MAKE :PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG.- 72W LED Fixture
454
5772
2620937.46
... More
Supply and fixing of 6-32A 10KA SP MCB, C/D Curve ISI in Octagonal pole with Din channel, with or without insulator terminal strip connector including cost & conveyance of all materials and labour charges etc., complete Makes: Legrand-DX3 / Schneider-A9/Hager-h3/ Siemens-5SX4/ Havells STADx /L&T-AU/Indo Asian-Opti pro/ HPL (Techno)/Anchor (Uno plus).
1814
339
615199.96
... More
Design, Fabrication, assembling, packaging, forwarding to site, installation, testing & commissioning of Outdor type panel with stand enclsoure consisting of 3Ph, , 415V, 50Hz, 3 nos of 200A fuse units, 9 no of 100A fuse units, RYB Indicators for incoming and outgoing phases Al. bus bar, floor mounting free standing totally enclosed compartmentalized front operational, vertical, dust and vermin proof, FRB Shrouding. LT panels fabricated with 2 mm thick for load bearing members, side sheet, removable top & bottom sheets, equipment mounting plate, front door & covers, partition and 3mm HRCA for undrilled gasket removable gland plate and base frame is ISMC -75.The panel shall be painted with texture finish electro static paint SIEMENS GREY RAL -7032 (powder coating).
7
39118
273830.2
... More
Supply installation, testing and commisision of 21Kva Three Phase Smart Streetlight CCMS Web Controller –Wireless Street light monitoring and controlling system with 63A MCB for incoming and 9 Nos of 20Amps SP MCB with 2 outputs with 1 no of buffer SP MCB of 3 Nos, includes inbuilt RF gateway. It uses GSM/GPRS/4G technology to receive commands and send data from and to the web software with 4G with 2G fall back, Micro HDMI port to be provided. MIPI CSI Camera port to be provided. Minimum of Two USB 3.0 ports to be provided. In-built GPS to be provided It should support GPS/GLONASS/BD, Switching Components, Automatic MCB Trip Rectification for nuisance MCB trips, Controller should have SPD of 20kV/10kA for the Panel. Metering: ISI Energy Meter with Class 1.0 accuracy and Complaint to IS:13779. Ability to communicate securely via cellular networks (GSM / GPRS /2G /3G /4G). Ability to send data regarding energy usage, ON/OFF status etc. from controller. Ability to remotely upgrade the CCMS device firmware from central server. Design Life should be More than 10 years. Inbuild Battery backed with RTC based timer for Bypass operation for up to 8 Hours. Enclosure: CRCA Metal Enclosure with IP65 and IK10 with size of 700x500x145mm CRCA 1.2 thickness with Single Door RAL 7035 Powder coating. Test report: Controller should be type- tested with NABL lab and the test report need to be submitted.Communication Charges per panel per annum included for the warranty period of 2 years,including CCMS Software charges, and Supply of Stand for 3 Phase panel, 6.2 feet height, MS powder coated with 5mm Thick and approved byengineer in charge
16
46300
740800
... More
Supply and laying of 3 core 2.5 Sqmm ISI marked, PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990..Makes: Finolex / RR kabel / Havells/ Finecab /KEI/Polycab/ Gloster/ Goldmedal/GM// Fortune Arrt/Anchor /Million
15880
171
2723896.4
... More
Supply transportation and laying of 16 Sqmm 4 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / Finecab / KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt
15398
259
3990391.7
... More
Supply transportation and laying of 10 Sqmm 4 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / Finecab / KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt
17206
225
3872554.42
... More
Supply transportation and laying of 35 Sqmm 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / Finecab / KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt
1600
377
603696
... More
Supply transportation and laying of 50 Sqmm 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / Finecab / KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt
140
489
68570.6
... More
Supply and Transportation and laying of Outer dia 63 mm and Inner dia 51mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Makes:DURA LINE (Dura Guard) or its equivalent make and as directed by the Engineer in Charge
34204
174
5984673.88
... More
Earth work excavation of Trench of size in all types of soils for covering of UG cables/HDPE pipe and refilling of Trench.
6156.72
395
2434243.95
... More
Providing independent earthing by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters.
23
4763
109568.32
... More
Supply and making end termination with heavy Alluminium lugs (pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape etc of up to 16 sqmm.Makes:Dowels/Jainson/Comet.
14512
13
197798.56
... More
Supply and making end termination with heavy Alluminium lugs (pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape etc of 35 sqmmMakes:Dowels/Jainson/Comet
184
27
5017.68
... More
Supply and making end termination with heavy Alluminium lugs (pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape etc of 50 sqmmMakes:Dowels/Jainson/Comet
56
35
1972.32
... More
Supply and laying of 8 SWG GI wire(0.104Kgs/1Mtr) Earth wire/Strip in horizontal run in Ground including,revitting,soldering,saddles,making connection etc as required
34204
11
388557.44
... More
Supply and laying of 25mm x 6mm GI Flat (1.18Kgs/1Mtr) Earth Strip in horizontal run in Ground including, revitting,soldering,saddles,making connection etc as required
46
110
5069.66
... More
Clearing and grubbing road land / pavement layers including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm by mechanical means in areas of non thorny jungle(light jungle), removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 of MORTH (5th Revision) including Contractors profit and Overhead charges for finished items of work and as directed by Engineers-in-charge
24.74
38840
960909.52
... More
Dismantling Granular Layers of Flexible Pavement by Mechanical means and disposal of dismantled material upto a lead of 1000 metres, stacking serviceable and unserviceable materials separately complete as per Technical Specification Clause 201 of MORTH (5th Revision) including Contractors profit and Overhead charges for finished items of work and as directed by Engineers-in-charge
2317
523
1212184.89
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH 0-3m
85830.45
133
11481539.3
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH 3-6m Including Dewatering
28472.55
160
4557031.63
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH above 6 m Including Dewatering
1718.46
197
339705.17
... More
Vibrated cement concrete M 15 Grade Concrete as levelling coarse using 40mm , 20mm and 10mm size HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed and compacted by vibration including curing for 14 days including cost, and conveyance of all materials to site and all labour charges ,centering, machine mixing, laying in position, Compacting , Vibrating and curing including all other incidental and all other operational charges of T&P required etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MoRTH .Minimum quantity of 275 kg cement to be used per cum of concrete.
2810.01
5304
14906906.35
... More
Vibrated reinforced cement concrete M 30 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution and excluding cost of steel and its fabrication charges for finished item per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH and as directed by the Engineer-in-Chargei) Drain Raft concrete M-30 grade including form work. Minimum quantity of 407 kg cement to be used per cum of concrete.
7383.77
5576
41177882.37
... More
Vibrated reinforced cement concrete M 30 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution and excluding cost of steel and its fabrication charges for finished item per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH and as directed by the Engineer-in-Chargeii) Drain Side Walls concrete M-30 grade excluding formwork. Minimum quantity of 407 kg cement to be used per cum of concrete.
11001.43
5389
59294517.29
... More
Vibrated reinforced cement concrete M 30 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution and excluding cost of steel and its fabrication charges for finished item per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH and as directed by the Engineer-in-Chargeiii) Drain Slab concrete M-30 grade including formwork. Minimum quantity of 407 kg cement to be used per cum of concrete.
6662.06
5924
39467975.44
... More
Form work for Drain side walls including cost & conveyance of all materials to site and labour charges, other incidental hire and operational charges of all T&P etc., complete as per approved drawings etc., complete and as directed by Engineer-in-charge
78924.3
568
44835316.34
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., complete and as directed by the Engineer in Charge.
1885.73
91446
172442522.15
... More
Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia PVC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing face. Complete as per drawing and technical specification Clauses 614, 709, 1204.3.7 MORD / 2706 & 2200 MORTH.
8817.95
235
2079537.15
... More
Supply and Laying of a geotextile 200 gsm between pitching and embankment slopes on which pitching is laid to prevent escape of the embankment material through the voids of the stone pitching/cement concrete blocks as well as to allow free movement of water without creating any uplift head on the pitching as per Tech Specifications in Section 700 & 2504 MORTH.
1364.56
189
258161.11
... More
Supply & Fixing of 20mm thick Compressible Fiber board joint filler in expansion joint complete as per drawing, Technical Specifications Section 2604 (5th Revision) and as directed by the Engineer in Charge
4230.8
696
2946582.97
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) and as per latest revisions and specifications and as directed by the Engineer - in - charge.
35089.72
620
21776329.33
... More
Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery of manhole covers and frames of H.D.-20 with 500mm dia. Clear opening with ISI marking anywhere in A.P., F.O.R. destination including, loading, unloading & stacking etc., as applicable.
648
2259
1464350.4
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete
109276.85
115
12581043.74
... More
Manufacture as per company’s standard specification supply and delivery of encapsulated plastic steps for man holes anywhere in A.P. including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work etc, complete
7185
188
1355091
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHa) 0.0 m To 3.0 m Depth
4816.3
133
644276.45
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHb) 3.0 m To 6.0 m Depth(including dewatering)
23.42
160
3748.37
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
3071.2
620
1905925.3
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete and as directed by Engineer-in-charge
3159.48
115
363750.93
... More
Vibrated reinforced cement concrete M 20 grade with batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed and compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MoRTH (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 347 kgs)Note : The rate shall be adjusted as per the approved design mix by the competent authority For Pipe Encasement
301.84
5115
1544210.42
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) /(Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, complete and as directed by the Engineer in Charge.
12.07
91446
1103753.58
... More
Laying and Providing End caps for DI & MS crossing pipes using Socket Flanges and Blank Flange joints .Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) (ex-works) Excluding Transportation etc., complete and as directed by Engineer-in-chargeFor DI pipe crossings (500mm)
1613
169
273919.66
... More
Supply & Delivery of Centrifugal Cast (spun) Ductile Iron fittings conforming to IS: 9523/2000 having dimensions as per BIS, with zinc coating externally and inside mortar lining (with finishing as per clause 13/IS9523/2000) including transportation to site of work , lowering carefully into trench and laying them true to alignment and gradient ((Reference to specifications. BIS No.3114/94) etc complete Above 500mm Dia
7976
169
1354484.32
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc to complete as directed by engineer incharge600mm Dia DI Pipes
766
793
607805.68
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc to complete as directed by engineer incharge700mm Dia DI Pipes
45
1023
46066.05
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc to complete as directed by engineer incharge800mm Dia DI Pipes
245
1281
313906.25
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc to complete as directed by engineer incharge600mm Dia DI Pipes
139
559
77774.67
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc to complete as directed by engineer incharge700mm Dia DI Pipes
8
635
5084.08
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc to complete as directed by engineer incharge800mm Dia DI Pipes
45
1117
50308.2
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.600mm Dia DI Pipes
139
686
95385.97
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.700mm Dia DI Pipes
8
912
7298.64
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.800mm Dia DI Pipes
45
1289
58028.85
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.ii) 11.25º to 45º Bend600mm Dia DI Pipes
20
686
13724.6
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.ii) 11.25º to 45º Bend700mm Dia DI Pipes
6
912
5473.98
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.ii) 11.25º to 45º Bend800mm Dia DI Pipes
12
1289
15474.36
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.iii) 45º to 90º Bend600mm Dia DI Pipes
4
686
2744.92
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For TeesFor Pipe Network700 X 700 X 700
3
912
2736.99
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For TeesFor Pipe Network800 X 800 X 800
3
1289
3868.59
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For TeesFor Scour Valves800 X 800 X 400
3
1289
3868.59
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For TeesFor Air Valves600 X 600 X 200
9
686
6176.07
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For TeesFor Air Valves700 X 700 X 300
6
912
5473.98
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For Reducers700 X 600 mm Dia
2
912
1824.66
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For Reducers800 X 600mm Dia
2
1289
2579.06
... More
Cost of Laying, Jointing, Hydrostatic Filed Test Pressure, Including Cost of Site Welding, Jointing Materials and Cost of Transportation of Water including Emptying Pipe Line After Completion Of Field Testing1900mm Dia MS pipe for Crossing
50
8016
400833.5
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with flanged Ends confirming to IS: 8329/2000 in Standard Working lengths of 1.0m with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation .For Air Valves300 K9
6
16070
96424.86
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with flanged Ends confirming to IS: 8329/2000 in Standard Working lengths of 1.0m with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation .For Air Valves200 K9
4
9579
38319.76
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with flanged Ends confirming to IS: 8329/2000 in Standard Working lengths of 1.0m with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation .For Scour Valves (3No of 1m length)400 K9
3
27913
83740.71
... More
Supply and delivery of DI D/F Gate Valves (Soft Seated) PN-16 Resilient seated soft sealing gate valves with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vaccum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538/ISO inclusive of VAT (sales tax), transportation to work site, loading, unloading (reference to specifications BIS No.3114/1994) for finished item of work 400
1
150581
150581.06
... More
Lowering, keeping in position and fixing DI Gate valves excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces 400
1
1691
1691.45
... More
Jointing DI gate valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994.)400
1
2012
2012.34
... More
Design, Supply, Erection and Commissioning of Air Management System having Efficient Air Release , Isolation Wafer Type Butterfly Valve, Tamperproof Enclosure System with Vandalized Alert and Burst Monitoring by pressure monitoring at Air Valve locations. The System will also capable of operating as flush valve in the event of requirement of drawing the water for fire incidents etc.300
3
380000
1140000
... More
Design, Supply, Erection and Commissioning of Air Management System having Efficient Air Release , Isolation Wafer Type Butterfly Valve, Tamperproof Enclosure System with Vandalized Alert and Burst Monitoring by pressure monitoring at Air Valve locations. The System will also capable of operating as flush valve in the event of requirement of drawing the water for fire incidents etc.200
2
260000
520000
... More
Supply, delivery, laying and jointing of Smooth Wall 40mm outer dia and 33mm inner dia Permanently Lubricated HDPE Telecom Duct with Silicore inner layer and 4mm PP Rope in 500mts Coil format confirming to TEC GR.No.TEC/GR/TX/CDS-008-03, March-2011 with Amdt. No.1, dt:25/28.03.2013 etc., complete and as directed by Engineer-in-charge
1106
55
60830
... More
Supply & fixing of Accessories like 40mm Push Fit Couplers, 40mm End Plugs & 40mm Simple Plugs for Smooth Wall 40mm outer dia and 33mm inner dia Permanently Lubricated HDPE Telecom Duct etc., complete and as directed by Engineer-in-charge
6
140
840
... More
Vibrated reinforced cement concrete M 25 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 403 kgs)Note : The rate shall be adjusted as per the approved design mix by the competent authority For Valve Chambersa) Raft
3.14
5572
17498.5
... More
Vibrated reinforced cement concrete M 25 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 403 kgs)Note : The rate shall be adjusted as per the approved design mix by the competent authority For Valve Chambersb) Walls 150mm thick
4.05
12947
52436.4
... More
Vibrated reinforced cement concrete M 25 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 403 kgs)Note : The rate shall be adjusted as per the approved design mix by the competent authority For Valve Chambersc) Slab
1.17
5905
6909.82
... More
Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery and Fixing of Heavy Duty manhole covers and frames - 24x24 HD 20 with ISI marking anywhere in A.P., F.O.R. destination including, loading, unloading & stacking at site etc., complete
5
2147
10736.6
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm hard granite machine crushed metal mechanically mixed , compacted by vibration including curing for 14 days including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawings and technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MORTH and directed by the departmental officers for PCC Bedding of Pipe Encasing, Valve Chambers & Thrustblocks
41.36
5129
212175.56
... More
Vibrated reinforced cement concrete M 25 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 403 kgs)Note : The rate shall be adjusted as per the approved design mix by the competent authority For Thrustblocks
142.97
5572
796738.93
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) /(Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, complete and as directed by the Engineer in Charge. for Valve Chambers & Thrustblocks
2.56
91446
234101.84
... More
Providing fitting and fixing mild Flat size (0.15x0.01) and bar including fabrication and one coat of primer etc complete as per drawing and technical specifications Clause 1208.2MORD / 1900 & 2703 MORTH and as directed by Engineer-in-charge
603.05
1334
804752.13
... More
Manufacturing, Supply, Delivery of Double chambered restrained joint DI K9 Pipes confirming to IS 8329 (restrained joints are designed and tested as per ISO 10804) (to be used to for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985 /8329-2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specials600mm Dia
11
16582
182403.21
... More
Manufacturing, Supply, Delivery of Double chambered restrained joint DI K9 Pipes confirming to IS 8329 (restrained joints are designed and tested as per ISO 10804) (to be used to for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985 /8329-2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specials700mm Dia
11
20167
221845.8
... More
Manufacturing, Supply, Delivery of Double chambered restrained joint DI K9 Pipes confirming to IS 8329 (restrained joints are designed and tested as per ISO 10804) (to be used to for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985 /8329-2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specials800mm Dia
11
24406
268474.47
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994)600mm Dia
11
793
8728.28
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994)700mm Dia
11
1023
11260.59
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994)800mm Dia
11
1281
14093.75
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.)600mm Dia
2
559
1119.06
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.)700mm Dia
2
635
1271.02
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.)800mm Dia
2
1117
2235.92
... More
Manufacture, Supplying and fitting Ductile Iron Double Chambered Restrained Joint fittings confirming to IS 9523 : 2000 (restrained joints are designed and tested as per ISO 10804) of Class K-12 (Alternative and to avoid concrete thrust blocks along with minimum length of Restrained joint DI pipes at bends) including rubber gasket confirming to IS 5382 : 1985 and locking bars & rubber gaskets etc complete but excluding TaxesDuctile Iron Double Chambered Restrained Joint
fittings-Fittings upto 500mm dia
500
366
183490
... More
Manufacture, Supplying and fitting Ductile Iron Double Chambered Restrained Joint fittings confirming to IS 9523 : 2000 (restrained joints are designed and tested as per ISO 10804) of Class K-12 (Alternative and to avoid concrete thrust blocks along with minimum length of Restrained joint DI pipes at bends) including rubber gasket confirming to IS 5382 : 1985 and locking bars & rubber gaskets etc complete but excluding TaxesDuctile Iron Double Chambered Restrained Joint
fittings-Fittings above 500mm dia
500
415
207915
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHa) 0.0 m To 3.0 m Depth
13007.26
133
1739981.17
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
14385.02
620
8927055.71
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete and as directed by Engineer-in-charge
9755.44
115
1123143.81
... More
Vibrated reinforced cement concrete M 20 grade with batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed and compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MoRTH (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 347 kgs)Note : The rate shall be adjusted as per the approved design mix by the competent authority For Pipe Encasement
61.12
5115
312689.31
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) /(Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, complete and as directed by the Engineer in Charge.
2.44
91446
223128.31
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc to complete as directed by Engineer incharge.100mm Dia DI K7 Pipes
3144.2
1377
4329877.82
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc to complete as directed by Engineer incharge.150mm Dia DI K7 Pipes
1888.73
2000
3779140.97
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc to complete as directed by Engineer incharge.200mm Dia DI K7 Pipes
1282.56
2650
3399540.71
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc to complete as directed by Engineer incharge.250mm Dia DI K7 Pipes
358
3521
1260564.54
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc to complete as directed by Engineer incharge.350mm Dia DI K7 Pipes
1370.4
5783
7925626.18
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc to complete as directed by Engineer incharge.400mm Dia DI K7 Pipes
111
6906
766662.57
... More
Supply & Delivery of Centrifugal Cast (spun) Ductile Iron fittings conforming to IS: 9523/2000 having dimensions as per BIS, with zinc coating externally and inside mortar lining (with finishing as per clause 13/IS9523/2000) including transportation to site of work , lowering carefully into trench and laying them true to alignment and gradient ((Reference to specifications. BIS No.3114/94) etc complete upto 500mm Dia
10422
154
1605196.44
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc to complete as directed by engineer inchargeFor Pipes100mm Dia
3144
66
209170.32
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc to complete as directed by engineer inchargeFor Pipes150mm Dia
1889
108
204710.93
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc to complete as directed by engineer inchargeFor Pipes200mm Dia
3999
157
630042.45
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc to complete as directed by engineer inchargeFor Pipes250mm Dia
358
212
76203.88
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc to complete as directed by engineer inchargeFor Pipes300mm Dia
111
275
30559.41
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc to complete as directed by engineer inchargeFor Pipes350mm Dia
2085
345
719971.35
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc to complete as directed by engineer inchargeFor Pipes400mm Dia
111
421
46778.73
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc to complete as directed by engineer inchargeFor Pipes450mm Dia
38
509
19372.78
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc to complete as directed by engineer inchargeFor Pipe Network100mm Dia DI Pipes
572
179
102759.8
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc to complete as directed by engineer incharge150mm Dia DI Pipes
343
217
74650.52
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc to complete as directed by engineer inchargeFor Pipe Network200mm Dia DI Pipes
727
236
171906.42
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc to complete as directed by engineer inchargeFor Pipe Network250mm Dia DI Pipes
65
266
17322.5
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc to complete as directed by engineer inchargeFor Pipe Network300mm Dia DI Pipes
20
303
6064
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc to complete as directed by engineer inchargeFor Pipe Network350mm Dia DI Pipes
379
359
136311.14
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc to complete as directed by engineer inchargeFor Pipe Network400mm Dia DI Pipes
20
388
7768.2
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc to complete as directed by engineer inchargeFor Pipe Network450mm Dia DI Pipes
7
445
3118.99
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For Pipe Network100mm Dia
572
79
45491.16
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For Pipe Network150mm Dia
343
115
39750.27
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For Pipe Network200mm Dia
727
139
101598.25
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For Pipe Network250mm Dia
65
156
10191.35
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For Pipe Network300mm Dia
20
238
4771.8
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For Pipe Network350mm Dia
379
302
114541.38
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For Pipe Network400mm Dia
20
334
6680.6
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For Pipe Network450mm Dia
7
390
2735.88
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For Bendsi) 0º to 11.25º Bend350
8
302
2417.76
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.ii) 11.25º to 45º Bend100mm Dia DI Pipes
40
79
3181.2
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.ii) 11.25º to 45º Bend150mm Dia DI Pipes
11
115
1274.79
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.iii) 45º to 90º Bend100mm Dia DI Pipes
30
79
2385.9
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.iii) 45º to 90º Bend200mm Dia DI Pipes
6
139
838.5
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.iii) 45º to 90º Bend250mm Dia DI Pipes
6
156
940.74
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For TeesFor Pipe Network100 X 100 X 80
477
79
37935.81
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For TeesFor Pipe Network100 X 100 X 100
93
79
7396.29
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For TeesFor Pipe Network150 X 150 X 80
18
115
2086.02
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For TeesFor Pipe Network150 X 150 X 100
42
115
4867.38
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For TeesFor Pipe Network150 X 150 X 150
8
115
927.12
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For TeesFor Pipe Network200 X 200 X 80
33
139
4611.75
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For TeesFor Pipe Network250 X 250 X 80
93
156
14581.47
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For TeesFor Pipe Network250 X 250 X 100
9
156
1411.11
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For TeesFor Pipe Network250 X 250 X 150
15
156
2351.85
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For TeesFor Pipe Network250 X 250 X 200
9
156
1411.11
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For TeesFor Pipe Network250 X 250 X 250
5
156
783.95
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For TeesFor Pipe Network300 X 300 X 250
9
238
2147.31
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For TeesFor Pipe Network350 X 350 X 150
9
302
2719.98
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For TeesFor Pipe Network350 X 350 X 350
6
302
1813.32
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For TeesFor Pipe Network450 X 450 X 350
6
390
2345.04
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For TeesFor Pipe Network450 X 450 X 450
3
390
1172.52
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For Reducers100 X 80
28
79
2226.84
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For Reducers150 X 80
12
115
1390.68
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For Reducers150 X 100
6
115
695.34
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For Reducers200 X 100
3
139
419.25
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For Reducers250 X 80
4
156
627.16
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For Reducers250 X 150
6
156
940.74
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For Reducers250 X 200
3
156
470.37
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For Reducers300 X 250
6
238
1431.54
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For Reducers350 X 300
90
302
27199.8
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For Reducers400 X 350
6
334
2004.18
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.For Reducers450 X 400
6
390
2345.04
... More
Manufacture, supply, & delivery of HDPE pipes grade PE 100 (10 kg/sqcm) conforming to IS 4984 - 1995 including transportation to any where in A.P. Outer Dia 50mm Dia HDPE Pipes
12853.6
115
1489603.7
... More
Manufacture, supply, & delivery of HDPE pipes grade PE 100 (10 kg/sqcm) conforming to IS 4984 - 1995 including transportation to any where in A.P. Outer Dia75mm Dia HDPE Pipes
1672.53
269
450362.15
... More
Laying and jointing of HDPE pipes by butt fusion welding as per IS:7634-Part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure. 50mm Dia HDPE Pipes
12854
26
340759.54
... More
Laying and jointing of HDPE pipes by butt fusion welding as per IS:7634-Part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure. 75mm Dia HDPE Pipes
1673
27
46693.43
... More
Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to anywhere in AP.a) HDPE Tees75mm Dia
95
261
24824.45
... More
Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to anywhere in AP.d) HDPE Bends75mm Dia
21
246
5177.34
... More
Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to anywhere in AP.e) HDPE Reducers63 X75 mm Dia
114
140
16060.32
... More
Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to anywhere in AP.e) HDPE Reducers75 x 90mm Dia
188
232
43787.08
... More
Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to anywhere in AP.f) M.S. Flangle50
45
118
5317.2
... More
Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to anywhere in AP.) M.S. Flangle 75 mm dia
3
190
572.61
... More
Service connection using 1 No.of Composite Clamp Saddle for tapping from DI distribution mains shall be of wrap around design, wide skirt and wide straps support, which shall reinforce the pipe while providing excellent stability to the saddle. Non corrosive plastic body moulded with stainless steel threaded metal insert for tapping outlet and underneath projection to self interlock with DI/HDPE main pipe. Threading size and dimensions shall conform to IS: 554. The body shall have retaining cavity housing for internal and external retention of the elastomeric seal. Straps shall be made Engineering plastic SS 304, NC Rolled thread, tightening torque for 1/2" (M12) nut bolt 14-15Kg.m and for 5/8"(M16) nut bolt 21-23Kg.m (DI Main Pipe Sizes from 100mm to 250mm with Outlet Sizes of 1/2", 3/4",1" Outlets),1 No. of Regulating Brass Ferrule.(1/2",3/4",1"),2 No. of compression adaptor with one side compression end to suit ½” /3/4”/1” (20mm/25mm/32mm OD )PE80 Blue pipe and other side with female threaded off-take with SS-304 material inserts of sizes ½” /3/4”/1” BSP threads, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin) and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16.Double Compression elbow to suit 20mm/25mm/32mm OD PE80 Blue pipe, Body, Nut and cap of polypropylene, clip ring of POM (Acetylic resin) and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16. PE80 Blue pipe of 4 meter length as per ISO4427 Rev1. for conveyance of potable water. the pressure rating 1/2" (20mm OD) will be PN16. Certificate for compliance of testing these fittings and pipe as per BS-6920 by designated Laboratories to be produced. inclusive of Transportation, installation cost, civil works such as earthwork excavation, refilling etc complete as directed by Engineer-incharge
425
1900
807500
... More
Supply,laying and jointing of MDPE Blue Pipe 40mm as per ISO 4427 Rev 1. For conveyance of potable water .The pressure rating of 40mm will be 4kg/cm. Certificate for compliance of testing these fittings and pipe as per BS-6920 by designated laboratories to be produced etc., complete and as directed by Engineer-in-charge
56.77
95
5393.15
... More
Manufacture, supply, delivery, Laying & Jointing of 16mm PE flexible pipes including transportation etc., complete and as directed by Engineer-in-charge
43194
8
371468.4
... More
Manufacture, supply, delivery, Laying of 16mm Start Connector/take off including transportation etc., complete and as directed by Engineer-in-charge
964
-
674.8
... More
Manufacture, supply, delivery, Laying of 16mm End Cap including transportation etc., complete and as directed by Engineer-in-charge
964
-
674.8
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm hard granite machine crushed metal mechanically mixed , compacted by vibration including curing for 14 days including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawings and technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MORTH and directed by the departmental officersPCC for Thrust blocks & Valve Chambers
25.87
5129
132712.32
... More
Vibrated reinforced cement concrete M 25 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 403 kgs)Note : The rate shall be adjusted as per the approved design mix by the competent authority For Thrust Block
48.09
5572
267994.51
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) /(Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, complete and as directed by the Engineer in Charge.For Thrust Block & Valve Chambers
0.34
91446
31091.65
... More
Laying and Providing End caps for DI & MS crossing pipes using Socket Flanges and Blank Flange joints .Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) (ex-works) Excluding Transportation etc., complete and as directed by Engineer-in-chargeFor DI pipe crossings (upto 500mm)
1178
154
181435.56
... More
Manufacturing, Supply, Delivery of Double chambered restrained joint DI K9 Pipes confirming to IS 8329 (restrained joints are designed and tested as per ISO 10804) (to be used to for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985 /8329-2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specials.100mm Dia
11
1967
21645.91
... More
Manufacturing, Supply, Delivery of Double chambered restrained joint DI K9 Pipes confirming to IS 8329 (restrained joints are designed and tested as per ISO 10804) (to be used to for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985 /8329-2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specials.150mm Dia
11
2733
30069.38
... More
Manufacturing, Supply, Delivery of Double chambered restrained joint DI K9 Pipes confirming to IS 8329 (restrained joints are designed and tested as per ISO 10804) (to be used to for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985 /8329-2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specials200mm Dia
11
3600
39605.06
... More
Manufacturing, Supply, Delivery of Double chambered restrained joint DI K9 Pipes confirming to IS 8329 (restrained joints are designed and tested as per ISO 10804) (to be used to for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985 /8329-2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specials250mm Dia
11
4707
51777.77
... More
Manufacturing, Supply, Delivery of Double chambered restrained joint DI K9 Pipes confirming to IS 8329 (restrained joints are designed and tested as per ISO 10804) (to be used to for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985 /8329-2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specials.300mm Dia
11
5862
64487.83
... More
Manufacturing, Supply, Delivery of Double chambered restrained joint DI K9 Pipes confirming to IS 8329 (restrained joints are designed and tested as per ISO 10804) (to be used to for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985 /8329-2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specials350mm Dia
11
7129
78422.74
... More
Manufacturing, Supply, Delivery of Double chambered restrained joint DI K9 Pipes confirming to IS 8329 (restrained joints are designed and tested as per ISO 10804) (to be used to for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985 /8329-2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specials.400mm Dia
11
9006
99068.86
... More
Manufacturing, Supply, Delivery of Double chambered restrained joint DI K9 Pipes confirming to IS 8329 (restrained joints are designed and tested as per ISO 10804) (to be used to for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985 /8329-2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specials.450mm Dia
11
10744
118190.27
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994)100mm Dia
11
66
731.83
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994)150mm Dia
11
108
1192.07
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994)200mm Dia
11
157
1733.05
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994)250mm Dia
11
212
2341.46
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994)300mm Dia
11
275
3028.41
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994)350mm Dia
11
345
3798.41
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994)400mm Dia
11
421
4635.73
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994)450mm Dia
11
509
5607.91
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.)100mm Dia
2
179
359.3
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.)150mm Dia
2
217
435.28
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.)200mm Dia
2
236
472.92
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.)250mm Dia
2
266
533
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.)300mm Dia
2
303
606.4
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.)350mm Dia
2
359
719.32
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.)400mm Dia
2
388
776.82
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.)450mm Dia
2
445
891.14
... More
Manufacture, Supplying and fitting Ductile Iron Double Chambered Restrained Joint fittings confirming to IS 9523 : 2000 (restrained joints are designed and tested as per ISO 10804) of Class K-12 (Alternative and to avoid concrete thrust blocks along with minimum length of Restrained joint DI pipes at bends) including rubber gasket confirming to IS 5382 : 1985 and locking bars & rubber gaskets etc complete but excluding TaxesDuctile Iron Double Chambered Restrained Joint
fittings Fittings upto 500mm dia
500
366
183490
... More
Manufacture, Supplying and fitting Ductile Iron Double Chambered Restrained Joint fittings confirming to IS 9523 : 2000 (restrained joints are designed and tested as per ISO 10804) of Class K-12 (Alternative and to avoid concrete thrust blocks along with minimum length of Restrained joint DI pipes at bends) including rubber gasket confirming to IS 5382 : 1985 and locking bars & rubber gaskets etc complete but excluding TaxesDuctile Iron Double Chambered Restrained Joint
fittings Fittings above 500mm dia
100
415
41583
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHa) 0.0 m To 3.0 m Depth
55608.46
133
7438743.69
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHb) 3.0 m To 6.0 m Depth(including dewatering)
18016.47
160
2883536.02
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHc) 6.0m(including dewatering)
1009.54
197
199565.87
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
8657.02
620
5372373.47
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm hard granite machine crushed metal mechanically mixed , compacted by vibration including curing for 14 days including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawings and technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MORTH and directed by the departmental officers PCC bedding for Power Conduit crossings
476.21
5129
2442943.01
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete and as directed by Engineer-in-charge
9133.23
115
1051508.77
... More
Supply of the HDPE Electrical pipe conduits with permanent Lubricant inner layer with ribs , dimensional ratio of 13.5, deflection not greater than 5% when exposed to the normal operating temperature 90 degrees centigrade under the overburden soil pressure and other physical properties confirming to ASTMF 2160 and / or NEMA TC 7 ( The expected service life of HDPE Pipe conduit and accessories shall not be less than 50 years) including transportation225
45884.86
3297
151287430.75
... More
Lowering Laying and jointing of 225mm HDPE electrical pipe conduits with silicore lubricant inner layer having ribs with Push fit coupler and as per drawing in ready made trenches true to alignment and gradient and maintain specified spacing with spacers (excluding cost of spacer ) including all materials labour charges and all other incidential charges etc complete for finished item of work as per drawing and as directed by the Engineer-in-Charge.
45886
133
6140923.38
... More
Manufacture, Supply and Delivery of RCC NP4 Socket and Spigot pipes conforming to B.I.S. 458/2003 (rate per meter of effective length) inclusive of Transportation.800mm Dia RCC NP4
202.3
8464
1712465.45
... More
Manufacture, Supply and Delivery of RCC NP4 Socket and Spigot pipes conforming to B.I.S. 458/2003 (rate per meter of effective length) inclusive of Transportation.1200mm Dia RCC NP4
109.36
14532
1589250.14
... More
Manufacture, Supply and Delivery of RCC NP4 Socket and Spigot pipes conforming to B.I.S. 458/2003 (rate per meter of effective length) inclusive of Transportation.1600mm Dia RCC NP4
119.8
23187
2777856.51
... More
Lowering the RCC pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/1985 800mm Dia RCC NP4
220.3
648
142917.42
... More
Lowering the RCC pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/19851200mm Dia RCC NP4
109.36
1192
130462.11
... More
Lowering the RCC pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/1985 1600mm Dia RCC NP4
119.8
1715
205527.68
... More
Providing Spacers of Acrylonitrile Butadiene Styrene (ABS) material make with 10mm thk for HDPE Pipe conduits including placing, positioning at 1.5 mtr interval as directed by engineer-in-charge.Spacers For Power Duct FOR 225 MM DIA PIPE
22943
210
4818030
... More
Supply and Laying of Warning tape of 225 mm thick in excavated trenches in two layer ,one Yellow colour tape at 100 mm and 250mm width Below FRL and Red colour tape at 400 mm and as directed by engineer-in-charge.
9234.16
29
267790.64
... More
Supply & Placing of chequered Cement concrete heavy duty tiles confirming to IS 1380 using aggregate cement pigments of of 25 mm thick(any shade-300 x300 mm) set over base coat of cement mortar 1:6 12 mm thick over cc bed already laid or RCC roof slab,including near cemnt slurry of honeylike consistency spread at the rate 3.3 kgs/sqm and jointed with need cement to full depth mixed with pigment of matching shade including cost of all materials like cement,sand,water and tiles etc ,complete finished item of work.
4440.68
1074
4772665.24
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHa) 0.0 m To 3.0 m Depth
4102.49
133
548790.09
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHb) 3.0 m To 6.0 m Depth including dewatering
4684.51
160
749755.83
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm hard granite machine crushed metal mechanically mixed , compacted by vibration including curing for 14 days including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawings and technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MORTH and directed by the departmental officers
132.38
5129
679105.43
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authoritya) Raft
358.22
5576
1997724.88
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authorityb) Walls 300 mm thick
885.95
9176
8130256.84
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authorityb) Walls 200 mm thick
200.88
11070
2223834
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authorityb) Walls 250 mm thick
111.88
9934
1111450.6
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authorityb) Walls 350 mm thick
172.36
8635
1488475.11
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authorityc) Slab
297.43
5924
1762061.57
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
412.55
620
256020.28
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) /(Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, complete and as directed by the Engineer in Charge.
334.41
91446
30580466.89
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete and as directed by Engineer-in-charge
7902.27
115
909788.35
... More
Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery and Fixing of Heavy Duty manhole covers and frames - 24x24 HD 20 with ISI marking anywhere in A.P., F.O.R. destination including, loading, unloading & stacking at site etc., complete
151
2147
324245.32
... More
Manufacture as per company’s standard specification supply and delivery of encapsulated plastic steps for man holes anywhere in A.P. including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work etc, complete
2744
188
517518.4
... More
Manufacture, supply,delivery and fixing of GI Electrode of 40mm Dia and 3m Length and transportation anywhere in Andhra Pradesh
153
540
82682.73
... More
Providing and Supply of FRP Gratings of 38x38mm mesh with 7/5mm rib of 38mm thick including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work etc, complete.
18.36
2447
44926.92
... More
Manufacture supply Fabrication and fixing of fixing of ISA 50x50x6 for manholes Grating including anywhere in A.P. including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work and one coat primer etc, complete.
550.8
107
59447.84
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH0.0 m To 3.0 m Depth
157325.35
133
21045412.07
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH3.0 m To 6.0 m Depth(including dewatering)
121876.19
160
19506284.21
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH6.0m(including dewatering)
147697.46
197
29196833.89
... More
Refilling with sand as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH and as directed by the Engineer - in - charge.
2092.86
620
1298787.06
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
10998.42
620
6825399.48
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm hard granite machine crushed metal mechanically mixed , compacted by vibration including curing for 14 days including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawings and technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MORTH and directed by the departmental officers
1074.79
5129
5513640.46
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authoritya) Raft
6367.26
5576
35508999.24
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authority d) RCC Duct wall
8232.75
5389
44372135
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authorityg) Slab
4926.17
5924
29184059.67
... More
Form work for Drain side walls including cost & conveyance of all materials to site and labour charges, other incidental hire and operational charges of all T&P etc., complete as per approved drawings etc., complete and as directed by Engineer-in-charge
31387.7
568
17830724.62
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) /(Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, complete and as directed by the Engineer in Charge.
993.57
91446
90858032.03
... More
Providing fitting and fixing mild steel plate size (0.15x0.01) and bar including fabrication, one coat of primer etc complete as per drawing and technical specifications Clause 1208.2MORD / 1900 & 2703 MORTH and as directed by Engineer-in-charge
13814.14
1334
18434555.41
... More
Providing fitting and fixing of mild steel plate 16 mm M.S.Rod welded to M.S.Flat @800 c/c and bar including fabrication, one coat of primer complete as per drawing and technical specifications Clause 1208.2MORD / 1900 & 2703 MORTH and as directed by Engineer-in-charge.
18.9
178
3380.64
... More
Providing and Supply of FRP Gratings of 38x38mm mesh with 7/5mm rib of 38mm thick including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work etc, complete.
759.34
2447
1858104.98
... More
Supply, fabricating , installing structural steel with MS Channels, Angles, Flats, Rods,one coat of primer etc complete as per Drawing
48069.96
107
5188190.78
... More
Supply of PVC Water Stopper 310mm wide to be provided at end of crossing etc., complete and as directed by Engineer-in-charge
1439.95
519
747650.84
... More
Supply of Polysheet of 125m micron thick to cover PVC water stopper etc., complete and as directed by Engineer-in-charge
246.48
17
4271.5
... More
Brick Masonry in CM (1:4) with Modular Bricks 19 x 9 x 9 cms 2nd class complete excluding pointing and plastering as per drawig and technical specifications clauses 600,1202 & 1203 MORD/1300 MORTH including cost and conveyance of materials to site with all leads & lifts , all other incidental and operational charges etc., complete and as directed by the Engineer-in-charge
24.7
9154
226126.03
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authorityWalls & Columns 200m thick
71.84
11070
795301.85
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authorityBeams & Slabs
46.58
5924
275953.43
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authorityPrecast Slabs
2.52
5924
14929.21
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, complete and as directed by the Engineer in Charge.
8.29
91446
758087.59
... More
Supply & Laying following G.I gratings confirming to IS:1239 P-1 (2004) with accessories like bend, socket etc. for laying of G.I gratings
391.02
134
52494.44
... More
Supply & Fixing of Powder Coated Fire Rated doors, frames & shutters made of Skin pass galvanized Iron sheet conforming to Base Steel as per IS 513 “D” Quality, Galvanized as per IS 277 with Hot Zinc Coating of 120 grams / Sq.Mtr with powder coating of thickness 60-65 Microns, frame with 1.2mm thick Skin pass Galvanized Iron sheet formed to double rebate profile of ize 143 mm X 58 mm with maximum bending radius of 1.4 mm and filled with in-fill Polyurethane foam, the Door Shutters are with 0.80 mm thick Skin pass Galvanized Iron Sheet formed to provide a 46 mm thick fully flush, double skin door shell with Lock Seam joints at stile edges, fitted with in-fill of Honeycomb Kraft Paper and coated with polyester powders of Pure polyester/ epoxy polyester or polyurethane powder for powder coating of thickness 60 – 65 microns and are coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability, the Shutter provided with 6 MM clear float vision glass in Circular, Square or Rectangular shapes, Stainless Steel Ball Bearing Butt Hinges 3 mm thick fixed flush to the frame and shutter (Profile 102x76x3mm thick).Mortise Sash Lock with Lever Handles, Mortise Dead Bolt, etc for 120 minutes Fire Rated door conforming to IS:3614 (Part2) 1992
21
15792
331642.29
... More
Supply, fabricating & fixing of anodised (20 to 25 micron) Aluminium ladder of 450mm wide with 2 nos rectangular section of 65 x 35 mm (3 mm thick) as vertical post and 25 mm bars steps at 300 mm c/c complete in all respect as per the specification and the direction of the Engineer.
20
1911
38220
... More
Double fixed Louvers ventilator window Size of 4’ 0” x 2’ 0” (1219.2mm x 609.6mm) outer frame box section size of 100 x 45mm, flymesh shutter frame section size 52 x 25 mm, vertical mullion section size of 100 x 60 mm
16
6253
100053.92
... More
Supply, providing & fabricating of MS Chequered Plate of 10mm thick including one coat of primer as per approved drawings as instructed by engineer in charge.
671.96
107
72524.64
... More
Supply & Laying following size 'B' class, G.I pipe confirming to IS:1239 P-1 (2004) with accessories like bend, socket etc. for laying of 150mm dia dewatering pipe.
24.56
2639
64813.84
... More
Supply and Fixing and Fabrication of stainless steel railing works using stainless steel 304 grade and stainless steel welding rods including buffing, polishing, lacquer finishing, to present seamless finish
791.18
716
567204.85
... More
Supply of 12" (300mm) ISI, 900 RPM Heavy duty exhaust fan with metallic blades with mark.
Makes: Crompton / Almounard / Havells Ventil Air-DB
4
3758
15033.52
... More
Supply and Installation of GI Fusible link Fire dampers 500 mm long with sleeve as per UL 555 Standard, Minimum width of damper shall be 225 mm.
0.64
9334
5974.03
... More
Supply, delivery & fixing of 150mm dia C.I double flanged pipe as per approved drawings as instructed by engineer in charge.
745.2
92
68983.16
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authorityWalls & Columns 200mm thick
73.61
11070
814896.56
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authorityPrecast Slab
8.89
5924
52666.94
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, complete and as directed by the Engineer in Charge.
5.78
91446
528558.05
... More
Double fixed Louvers ventilator window Size of 4’ 0” x 2’ 0” (1219.2mm x 609.6mm) outer frame box section size of 100 x 45mm, flymesh shutter frame section size 52 x 25 mm, vertical mullion section size of 100 x 60 mm
69.6
6253
435234.55
... More
Supply, providing & fabricating of MS Chequered Plate of 10mm thick including one coat of primer as per approved drawings as instructed by engineer in charge.
3295.12
107
355642.3
... More
Supply, providing & fixing of 16 mm M.S.Rod weleded to M.S.Flat including fabrication, one coat of primer as per approved drawings as instructed by engineer in-charge.
2947.2
178
527165.66
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authorityWalls & Columns 400mm thick
40.96
8230
337104.49
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authorityPrecast Slab
29.62
5576
165185.11
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, complete and as directed by the Engineer in Charge.
4.94
91446
451743.39
... More
Providing and Supply of FRP Gratings of 38x38mm mesh with 7/5mm rib of 38mm thick including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work etc, complete.
59.36
2447
145253.92
... More
Supply & Laying following size 'B' class, G.I pipe confirming to IS:1239 P-1 (2004) with accessories like bend, socket etc. for laying of 80mm dia G.I pipe
80.92
1184
95809.28
... More
Supply, delivery & fixing of 150mm dia C.I double flanged pipe as per approved drawings as instructed by engineer in charge.
690.2
92
63891.81
... More
Supply & Laying following size 'B' class, G.I pipe confirming to IS:1239 P-1 (2004) with accessories like bend, socket etc. for laying of 150mm dia G.I pipe
700
2639
1847300
... More
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 80mm dia PN 1.60 MPA
28
11836
331422.56
... More
Supply, fabricating , installing structural steel supports for Earthing Matl with MS Channels, Angles, Flats, Rods, as required at site with neccesary welding ,anchor fasteners, Clamps, threaded rods, nuts, bolts,washers,one coat of primer etc complete as per Drawing and as directed by the Engineer-in-charge
29751.35
107
3211063.21
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHa) 0.0 m To 3.0 m Depth
410.32
133
54888.51
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHb) 3.0 m To 6.0 m Depth(including dewatering)
129.53
160
20731.28
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
576.42
620
357714.72
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm hard granite machine crushed metal mechanically mixed , compacted by vibration including curing for 14 days including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawings and technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MORTH and directed by the departmental officers
34.17
5129
175291.07
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete and as directed by Engineer-in-charge
657.89
115
75742.88
... More
Brick Masonry in CM (1:4) with Modular Bricks 19 x 9 x 9 cms 2nd class complete excluding pointing and plastering as per drawig and technical specifications clauses 600,1202 & 1203 MORD/1300 MORTH including cost and conveyance of materials to site with all leads & lifts , all other incidental and operational charges etc., complete and as directed by the Engineer-in-charge
2.15
9154
19683.04
... More
Manufacture, Supply and Delivery of RCC NP4 Socket and Spigot pipes conforming to B.I.S. 458/2003 (rate per meter of effective length) inclusive of Transportation.400mm Dia RCC NP4
199.09
2795
556623.79
... More
Lowering the RCC pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/1985400mm Dia RCC NP4
199.09
335
66828.54
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHa) 0.0 m To 3.0 m Depth
77479.09
133
10364377.87
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHb) 3.0 m To 6.0 m Depth(including dewatering)
69237.96
160
11081535.5
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHc) 6.0m(including dewatering)
44557.4
197
8808106.83
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
7489
620
4647523.62
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm hard granite machine crushed metal mechanically mixed , compacted by vibration including curing for 14 days including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawings and technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MORTH and directed by the departmental officers
2026.94
5129
10398141.39
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete and as directed by Engineer-in-charge
11775.25
115
1355684.53
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron with HAC and Polyethylene Sleeve Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation .700 K7
240.1
17778
4268680.28
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron with HAC and Polyethylene Sleeve Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation .1200 K9
240.2
45013
10812132.21
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.600
8
686
5489.84
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.700
134
912
122252.22
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking.1200
43.68
1701
74341.18
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994)600
40
793
31739.2
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994)700
736
1023
753435.84
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994)1200
240.2
2510
602962.05
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.)600
8
559
4476.24
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.)700
134
635
85158.34
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.)1200
44
1657
72923.4
... More
Manufacture, Supply and Delivery of RCC with 12 mm HAC In-lining Pipe with Socket and Spigot pipes conforming to B.I.S. 458/2003 (rate per meter of effective length) inclusive of Transportation.RCC NP41400
383.2
20093
7699787.05
... More
Manufacture, Supply and Delivery of RCC with 12 mm HAC In-lining Pipe with Socket and Spigot pipes conforming to B.I.S. 458/2003 (rate per meter of effective length) inclusive of Transportation.RCC NP41800
30
31785
953560.2
... More
Lowering the RCC pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/19851400
383.2
1454
557276.26
... More
Lowering the RCC pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/19851800
30
1976
59307
... More
Laying of SN8 structured wall (External Annular Corrugated & Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth & alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe & sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications & detail engineering, including carriage of pipes & fittings from site stacks to the place of laying etc. as per direction of Engineer-in-charge. (Payment to be made on the basis of actual finished length of pipe line).200mm DWC Pipe
115.35
137
15857.16
... More
Manufacture, supply, & delivery of (DWC) structured wall polyethylene/polypropylene piping system with nonsmooth external annular corrugated and smooth internal surface (Double Wall) for nonpressure sewage & Drainage application pipes of standard length 6 m, grade conforming to IS 16098 (part-II: 2013) including transportation to anywhere in A.P .250mm DWC Pipe
177.5
937
166374.3
... More
Laying of SN8 structured wall (External Annular Corrugated & Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth & alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe & sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications & detail engineering, including carriage of pipes & fittings from site stacks to the place of laying etc. as per direction of Engineer-in-charge. (Payment to be made on the basis of actual finished length of pipe line).250mm DWC Pipe
242.7
215
52391.65
... More
Laying of SN8 structured wall (External Annular Corrugated & Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth & alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe & sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications & detail engineering, including carriage of pipes & fittings from site stacks to the place of laying etc. as per direction of Engineer-in-charge. (Payment to be made on the basis of actual finished length of pipe line).300mm DWC Pipe
73.9
286
21158.31
... More
Laying of SN8 structured wall (External Annular Corrugated & Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth & alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe & sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications & detail engineering, including carriage of pipes & fittings from site stacks to the place of laying etc. as per direction of Engineer-in-charge. (Payment to be made on the basis of actual finished length of pipe line).400mm DWC Pipe
49.2
516
25433.94
... More
Providing and constructing of precast RCC circular manhole of grade M-30,Type- A ,900 mm internal diameter according to drawing, fixing (slant portion of 0.64 m and raft 0.3 m) with cover and frame (heavy duty, 24x24 HD-20 grade designation) internal diameter, total weight of cover and frame to be not less than 182 kg, Plastering with SRC cement motor 1:3 including centering shuttering and HYSD FE500 all complete as per standard design and as directed by Engineer in charge.
3
18555
55666.29
... More
Wall Extra Depth for every 1.0 m depth beyond 0.64 m and inling with SRC cement motor of 1:3. With Wall thickness 150mm including Reinforcement HYSD FE500 & Centering For Type-A Manhole
1.94
10603
20570.13
... More
Supply and placing of Plain Cement concrete M15 nominal mix prop (Cement : fine aggregate: coarse aggregate ) using 40mm guage hard granite machine crushed metal including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawing, technical specifications standard design and as directed by Engineer in charge. (If quantity of cement increase/decrease the rate will be deducted as per design mix) PCC - M15 For Benching
0.92
5304
4880.54
... More
Providing and constructing of precast RCC circular manhole of grade M-30,Type- B, 1200mm internal diameter according to drawing, fixing (Slant portion of 1.15m and raft 0.3m) with cover and frame (heavy duty,24x24 HD-20 grade designation) , total weight of cover and frame to be not less than 182 kg. Plastering with SRC cement motor 1:3 including centering shuttering and Reinforcement HYSD FE 500all complete as per standard design and as directed by Engineer in charge
2
30151
60302.64
... More
Wall Extra Depth for every 1.0 m depth beyond 1.15 m and inling with SRC cement motor of 1:3.With Wall thickness 150mm including Reinforcement HYSD FE500 & Centering For Type-B Manhole
2.24
16343
36608.84
... More
Supply and placing of Plain Cement concrete M15 nominal mix prop (Cement : fine aggregate: coarse aggregate ) using 40mm guage hard granite machine crushed metal including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawing, technical specifications standard design and as directed by Engineer in charge. (If quantity of cement increase/decrease the rate will be deducted as per design mix) PCC - M15 For Benching
1.17
5304
6206.77
... More
Providing and constructing of precast RCC circular manhole of grade M-30,Type- C, 1500 mm internal diameter according to drawing, fixing (Slant portion of 1.5 m and raft 0.33 m) with cover and frame (heavy duty,24x24 HD-20 grade designation), total weight of cover and frame to be not less than 182 kg. Plastering with SRC cement motor 1:3 including centering shuttering and Steel Reinforcement HYSD Steel FE 500 all complete as per standard design and as directed by Engineer in charge.
20
43922
878449.4
... More
Wall Extra Depth for every 1.0 m depth beyond 1.5 m and inling with SRC cement motor of 1:3.With Wall thickness 200mm including Reinforcement HYSD FE500 & Centering For Type-C Manhole
63.28
25829
1634492.66
... More
Supply and placing of Plain Cement concrete M15 nominal mix prop (Cement : fine aggregate: coarse aggregate ) using 40mm guage hard granite machine crushed metal including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawing, technical specifications standard design and as directed by Engineer in charge. (If quantity of cement increase/decrease the rate will be deducted as per design mix) PCC - M15 For Benching
20.91
5304
110926.09
... More
Providing and constructing M-30 RCC circular manhole of grade M-30,Type- D , 1800 mm internal diameter according to drawing, fixing (Slant portion of 2 m and raft 0.4 m) with cover and frame (heavy duty, 24x24 HD-20 grade designation) total weight of cover and frame to be not less than 182 kg. Plastering with SRC cement motor 1:3 including centering shuttering and Steel Reinforcement HYSD FE 500 all complete as per standard design and as directed by Engineer in charge.
47
63903
3003442.41
... More
WallExtra Depth for every 1.0 m depth beyond 2 m and inling with SRC cement motor of 1:3.With Wall thickness 200mm including Reinforcement HYSD FE500 & Centering For Type-D Manhole
261.37
33037
8634919.9
... More
Supply and placing of Plain Cement concrete M15 nominal mix prop (Cement : fine aggregate: coarse aggregate ) using 40mm guage hard granite machine crushed metal including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawing, technical specifications standard design and as directed by Engineer in charge. (If quantity of cement increase/decrease the rate will be deducted as per design mix) PCC - M15 For Benching
74.27
5304
393997.15
... More
Manufacture as per company’s standard specification supply and delivery of encapsulated plastic steps for man holes anywhere in A.P. including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work etc.
1328
188
250460.8
... More
Providing sand cast iron drop connection externally for 60 cm drop from branch sewer line to main sewer manhole including inspection and cleaning eye with chain and lid, sand cast iron drop pipe and bend encased allround with cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) with all centering and shuttering required, cutting holes in walls and making good with brick work in cement mortar 1:4 (1 cement : 4 coarse sand) plastered with cement mortar 1:3 (1 cement : 3 coarse sand) on inside of the manhole wall, lead caulked joints between sand cast iron pipes and fittings, stiff cement mortar 1:1 (1 cement : 1 fine sand) joints between sand cast iron tee and S.W. pipe, making required channels complete as per standard design and specifications
150 mm dia sand cast iron drop connectionFor depths up to 60 cm
14
15841
221774.98
... More
Providing sand cast iron drop connection externally for 60 cm drop from branch sewer line to main sewer manhole including inspection and cleaning eye with chain and lid, sand cast iron drop pipe and bend encased allround with cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) with all centering and shuttering required, cutting holes in walls and making good with brick work in cement mortar 1:4 (1 cement : 4 coarse sand) plastered with cement mortar 1:3 (1 cement : 3 coarse sand) on inside of the manhole wall, lead caulked joints between sand cast iron pipes and fittings, stiff cement mortar 1:1 (1 cement : 1 fine sand) joints between sand cast iron tee and S.W. pipe, making required channels complete as per standard design and specifications
150 mm dia sand cast iron drop connectionExtra for depths beyond 60 cm of sand cast iron drop connection complete
11.34
4139
46939.89
... More
Manufacturing, Supply, Delivery of Double chambered restrained joint DI K9 Pipes confirming to IS 8329 (restrained joints are designed and tested as per ISO 10804) (to be used to for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985 /8329-2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specials600
11
16582
182403.21
... More
Manufacturing, Supply, Delivery of Double chambered restrained joint DI K9 Pipes confirming to IS 8329 (restrained joints are designed and tested as per ISO 10804) (to be used to for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985 /8329-2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specials700
11
20167
221845.8
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994)600
11
793
8728.28
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994)700
11
1023
11260.59
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.)600
2
559
1119.06
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.)700
2
635
1271.02
... More
Manufacture, Supplying and fitting Ductile Iron Double Chambered Restrained Joint fittings confirming to IS 9523 : 2000 (restrained joints are designed and tested as per ISO 10804) of Class K-12 (Alternative and to avoid concrete thrust blocks along with minimum length of Restrained joint DI pipes at bends) including rubber gasket confirming to IS 5382 : 1985 and locking bars & rubber gaskets etc complete but excluding TaxesDuctile Iron Double Chambered Restrained Joint
fittingsFittings above 500mm dia
100
415
41583
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHa) 0.0 m To 3.0 m Depth
7122.81
133
952818.29
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
4298.49
620
2667556.92
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm hard granite machine crushed metal mechanically mixed , compacted by vibration including curing for 14 days including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawings and technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MORTH and directed by the departmental officersFor PCC Bedding
166.35
5129
853370.51
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete and as directed by Engineer-in-charge
4464.84
115
514037.03
... More
Manufacture, Supply and Delivery of RCC NP4 Socket and Spigot pipes conforming to B.I.S. 458/2003 (rate per meter of effective length) inclusive of Transportation.1000mm Dia RCC NP4
172.55
11173
1927982.25
... More
Lowering the RCC pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/19851000mm Dia RCC NP4
172.55
931
160754.48
... More
Supply and Transportation of double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Makes: DURA LINE (Dura Guard)/Precision/CPE or any ISI approved make .For Outer dia 160 mm and Inner dia 136 mm
28341.8
529
15005566.01
... More
Lowering& Jointing of double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Makes: DURA LINE (Dura Guard)/Precision/CPE or any ISI approved make .For Outer dia 160 mm and Inner dia 136 mm
28341.8
21
598578.82
... More
Providing of 7 way ( Multi duct for ICT) with permanent Lubricant inner layer with ribs , dimensional ratio of 13.5, deflection not greater than 5% when exposed to the normal operating temperature 90 degrees centigrade under the overburden soil pressure and other physical properties confirming to ASTMF 2160 and / or NEMA TC 7 ( The expected service life of HDPE Pipe conduit and accessories shall not be less than 50 years) including transportation
49540.6
1085
53752541.81
... More
Laying and Jointing of 7 Way 40mm Multi Duct in ready made trenches true to alignment and gradient with push fit coupler including all sundries but excluding cost & conveyance of pipes from source of supply and jointing materials etc, complete and as directed by Engineer-in-charge
49540.6
40
2013329.98
... More
Providing Spacers of Acrylonitrile Butadiene Styrene (ABS) material make with 10mm thk for HDPE Pipe conduits including placing, positioning at 1.5 mtr interval as directed by engineer-in-charge.Spacers for ICT : DWC- 4 & 7 Way-7
4411
2030
8954330
... More
Providing Spacers of Acrylonitrile Butadiene Styrene (ABS) material make with 10mm thk for HDPE Pipe conduits including placing, positioning at 1.5 mtr interval as directed by engineer-in-charge.Spacers for ICT : DWC- 6 & 7 Way-8
88
2620
230560
... More
Supply and Laying of Warning tape of 225 mm thick in excavated trenches in two layer ,one Yellow colour tape at 100 mm and 250mm width Below FRL and Red colour tape at 400 mm and as directed by engineer-in-charge.
14039.4
29
407142.6
... More
Supply & Placing of chequered Cement concrete heavy duty tiles confirming to IS 1380 using aggregate cement pigments of of 25 mm thick(any shade-300 x300 mm) set over base coat of cement mortar 1:6 12 mm thick over cc bed already laid or RCC roof slab,including near cemnt slurry of honeylike consistency spread at the rate 3.3 kgs/sqm and jointed with need cement to full depth mixed with pigment of matching shade including cost of all materials like cement,sand,water and tiles etc ,complete finished item of work.
5896.55
1074
6337376.08
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHa) 0.0 m To 3.0 m Depth
2946.25
133
394119.86
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHb) 3.0 m To 6.0 m Depth(including dewatering)
3640.84
160
582716.44
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm hard granite machine crushed metal mechanically mixed , compacted by vibration including curing for 14 days including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawings and technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MORTH and directed by the departmental officers
70.86
5129
363509.67
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authoritya) Raft
275.44
5576
1536076.55
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authorityb) Walls 250mm thcik
798.15
9934
7929069.53
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authorityb) Slab
117.25
5924
694623
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
322.34
620
200037.76
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) /(Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, complete and as directed by the Engineer in Charge.
95.27
91446
8712063.28
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete and as directed by Engineer-in-charge
3547.01
115
408367.26
... More
Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery and Fixing of Heavy Duty manhole covers and frames - 24x24 HD 20 with ISI marking anywhere in A.P., F.O.R. destination including, loading, unloading & stacking at site etc., complete
101
2147
216879.32
... More
Manufacture as per company’s standard specification supply and delivery of encapsulated plastic steps for man holes anywhere in A.P. including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work etc, complete but excluding all taxes.
2232
188
420955.2
... More
Providing and Supply of FRP Gratings of 38x38mm mesh with 7/5mm rib of 38mm thick including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work etc, complete
36.36
2447
88972.92
... More
Providing and Fixing of ISA 50x50x6mm for for man holes anywhere in A.P. including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work etc, complete
1090.8
107
117730.04
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHUpto 3m
8555.4
133
1144455.86
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
2138.85
620
1327327.53
... More
Supply, delivery, laying and jointing of Smooth Wall 40mm outer dia and 33mm inner dia Permanently Lubricated HDPE Telecom Duct with Silicore inner layer and 4mm PP Rope in 500mts Coil format confirming to TEC GR.No.TEC/GR/TX/CDS-008-03, March-2011 with Amdt. No.1, dt:25/28.03.2013 etc., complete and as directed by Engineer-in-charge40 mm OD HDPE Pipe
108640
55
5975200
... More
Manufacture, Supply and Delivery of RCC NP4 Socket and Spigot pipes conforming to B.I.S. 458/2003 (rate per meter of effective length) inclusive of Transportation.300mm RCC NP4 Pipe
3960
1881
7448760
... More
Lowering the RCC pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/1985 etc., complete and as directed by Engineer-in-charge300mm RCC NP4 Pipe
3960
262
1038866.4
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm guage hard granite machine crushed metal including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete for levelling course as directed by the departmental officers.
1.7
5129
8720.95
... More
Vibrated reinforced cement concrete M 25 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 403 kgs)Note : The rate shall be adjusted as per the approved design mix by the competent authority
5.67
5572
31597.61
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete and as directed by the Engineer in Charge.
0.34
91446
31091.65
... More
Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery and Fixing of Heavy Duty manhole covers and frames of 24x24 HD-20 with ISI marking anywhere in A.P., F.O.R. destination including, loading, unloading & stacking at site.
56
2147
120249.92
... More
Providing and applying Black Bitumen coating outside of Ductile iron Pipes including all material, labour and machinery etc., complete, with all taxes, insurance, freight charges, inspection charges, transportation, etc. complete including all labour, materials and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge.350mm Dia
266.12
171
45506.52
... More
Providing and applying Black Bitumen coating outside of Ductile iron Pipes including all material, labour and machinery etc., complete, with all taxes, insurance, freight charges, inspection charges, transportation, etc. complete including all labour, materials and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge.400mm Dia
839.95
171
143631.45
... More
Providing and applying Black Bitumen coating outside of Ductile iron Pipes including all material, labour and machinery etc., complete, with all taxes, insurance, freight charges, inspection charges, transportation, etc. complete including all labour, materials and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge.450mm Dia
1493.02
171
255306.42
... More
Providing and applying Black Bitumen coating outside of Ductile iron Pipes including all material, labour and machinery etc., complete, with all taxes, insurance, freight charges, inspection charges, transportation, etc. complete including all labour, materials and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge.500mm Dia
2107.29
171
360346.59
... More
Providing and applying Black Bitumen coating outside of Ductile iron Pipes including all material, labour and machinery etc., complete, with all taxes, insurance, freight charges, inspection charges, transportation, etc. complete including all labour, materials and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge.600mm Dia
14312.49
171
2447435.79
... More
Providing and applying Black Bitumen coating outside of Ductile iron Pipes including all material, labour and machinery etc., complete, with all taxes, insurance, freight charges, inspection charges, transportation, etc. complete including all labour, materials and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge.800mm Dia
7400.64
171
1265509.44
... More
Providing and applying Black Bitumen coating outside of Ductile iron Pipes including all material, labour and machinery etc., complete, with all taxes, insurance, freight charges, inspection charges, transportation, etc. complete including all labour, materials and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge.900mm Dia
5737.65
171
981138.15
... More
Cleaning of chocked pipe line by diesel running vehicle mounted hydraulic operated high pressure suction cum jetting cleaning machine fitted with pump having 4000 litre suction capacity and 6000 litre water tank capacity including skilled operator supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of Pipe lines.Dechocking and flusing of sewer line from one manhole to another by high pressure jetting systemof 2200 PSI for Pipe line 600mm Dia
1818
549
999354.6
... More
Cleaning of chocked pipe line by diesel running vehicle mounted hydraulic operated high pressure suction cum jetting cleaning machine fitted with pump having 4000 litre suction capacity and 6000 litre water tank capacity including skilled operator supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of Pipe lines.Dechocking and flusing of sewer line from one manhole to another by high pressure jetting systemof 2200 PSI for Pipe line 800mm Dia
516
732
378191.88
... More
Conducting Hydralic field test pressure for all types of pipelines and all dia's with required pressure including all machineary ,materials & manpower transportation of Water all complete etc., as per specification and to the satisfaction of Engineer-in-charge.600mm Dia
1818
47
86391.36
... More
Conducting Hydralic field test pressure for all types of pipelines and all dia's with required pressure including all machineary ,materials & manpower transportation of Water all complete etc., as per specification and to the satisfaction of Engineer-in-charge.800mm Dia
516
63
32693.76
... More
Providing and applying Black Bitumen coating Outside of Ductile iron Pipes including all material and labour and machinery etc., complete, with all taxes, insurance, freight charges, inspection charges, transportation, etc. complete including all labour, materials and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge.200mm Dia
1791.84
171
306404.64
... More
Providing and applying Black Bitumen coating Outside of Ductile iron Pipes including all material and labour and machinery etc., complete, with all taxes, insurance, freight charges, inspection charges, transportation, etc. complete including all labour, materials and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge.300mm Dia
1000.64
171
171109.44
... More
Providing and applying Black Bitumen coating Outside of Ductile iron Pipes including all material and labour and machinery etc., complete, with all taxes, insurance, freight charges, inspection charges, transportation, etc. complete including all labour, materials and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge.350mm Dia
812
171
138852
... More
Cleaning rubbish, sludge, weeds scum, liquid earth, mud etc. from box drain / covered nikashi etc. by mathor labour after removing concrete slab / manhole cover etc. without damaging the same and refixing the same properly after cleaning as necessary and removing the sludge etc. by using iron pans, buckets including all labour, tools & plants including expulsion of impure / inflammable / asphyxiating gases from the drains etc. and removing the spoils in dry condition and disposing the same by truck beyond the area of Municipal Corporation / Municipality / Notified Area Authority / Industrial Township Authority etc. for such disposal including the cost of loading, unloading, transportation and making arrangement of necessary land for disposal, spreading and leveling as necessary etc. and cleaning the road side in all respects, complete as per direction of the Engineer- in-Charge. (Land for disposal to bearranged by the contractor).Power MV Manholes & Power Duct
5000
882
4412900
... More
Cleaning and chocked pipe line by diesel running vehicle mounted hydraulic operated high pressure suction cum jetting cleaning machine fitted with pump having 4000 litre suction capacity and 6000 litre water tank capacity including skilled operator supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of Pipe lines. Dechocking and flusing of sewer line from one manhole to another by high pressure jetting systemof 2200 PSI for Pipe line 225mm Dia
8176
274
2247173.6
... More
Demolition of RCC Work including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead
1000
3948
3948520
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete including Taxes
1000
115
115130
... More
Cleaning of reinforcement from rust from the reinforcement bars to give it as total rust free steel surface by using alkaline rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry,all complete as per direction of Engineer in charge 10mm Dia Bars
1000
5
5600
... More
Cleaning of reinforcement from rust from the reinforcement bars to give it as total rust free steel surface by using alkaline rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry,all complete as per direction of Engineer in charge 12mm Dia Bars
1000
7
7470
... More
Cleaning of reinforcement from rust from the reinforcement bars to give it as total rust free steel surface by using alkaline rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry,all complete as per direction of Engineer in charge 16mm Dia Bars
1000
9
9340
... More
Cleaning of reinforcement from rust from the reinforcement bars to give it as total rust free steel surface by using alkaline rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry,all complete as per direction of Engineer in charge 20mm Dia Bars
1000
11
11210
... More
Specialised Injection Grouting with Cement and Free Flow Additives includes Drilling of holes with power drilling machine to the required depth [12mm to 14mm dia holes], Fixing of Rubber Nozzles with cement and quick setting, Rapid hardening compound putty - Rapidstrong qs or equivalent.Grouting of holes with 140 PSI Grout pump with cement slurry mixing with Specialized Free flow, Non-shrink Grout additive - 250 Grams per bag of 50 Kgs Cement add required water to make slurry form.After completion of grouting, Remove the Rubber nozzles e]. Later sealing of the hole with polymer cement putty .
100
196
19655
... More
Ultrasonic Pulse Velocity Tests Conducting Ultrasonic Pulse Velocity Tests on the Concrete Slab for retrofitting works including cost of labour,material etc complete as directed by the Engineering in-charge for retrofitting works
100
600
60000
... More
Rebound Hammer Test Conducting Rebound Hammer Test the concrete Surface for retrofitting works including cost of labour,material etc complete as directed by the Engineering in-charge for retrofitting works
100
500
50000
... More
Cleaning rubbish, sludge, weeds scum, liquid earth, mud etc. from box drain / covered nikashi etc. by mathor labour after removing concrete slab / manhole cover etc. without damaging the same and refixing the same properly after cleaning as necessary and removing the sludge etc. by using iron pans, buckets including all labour, tools & plants including expulsion of impure / inflammable / asphyxiating gases from the drains etc. and removing the spoils in dry condition and disposing the same by truck beyond the area of Municipal Corporation / Municipality / Notified Area Authority / Industrial Township Authority etc. for such disposal including the cost of loading, unloading, transportation and making arrangement of necessary land for disposal, spreading and leveling as necessary etc. and cleaning the road side in all respects, complete as per direction of the Engineer- in-Charge. (Land for disposal to bearranged by the contractor).Storm Water Drains
2000
882
1765160
... More
Demolition of RCC Work including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead
500
3948
1974260
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete including Taxes
500
115
57565
... More
Cleaning of reinforcement from rust from the reinforcement bars to give it as total rust free steel surface by using alkaline rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry,all complete as per direction of Engineer in charge 10mm Dia Bars
1000
5
5600
... More
Cleaning of reinforcement from rust from the reinforcement bars to give it as total rust free steel surface by using alkaline rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry,all complete as per direction of Engineer in charge 12mm Dia Bars
1000
7
7470
... More
Cleaning of reinforcement from rust from the reinforcement bars to give it as total rust free steel surface by using alkaline rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry,all complete as per direction of Engineer in charge 16mm Dia Bars
1000
9
9340
... More
Cleaning of reinforcement from rust from the reinforcement bars to give it as total rust free steel surface by using alkaline rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry,all complete as per direction of Engineer in charge 20mm Dia Bars
1000
11
11210
... More
Specialised Injection Grouting with Cement and Free Flow Additives includes Drilling of holes with power drilling machine to the required depth [12mm to 14mm dia holes], Fixing of Rubber Nozzles with cement and quick setting, Rapid hardening compound putty - Rapidstrong qs or equivalent.Grouting of holes with 140 PSI Grout pump with cement slurry mixing with Specialized Free flow, Non-shrink Grout additive - 250 Grams per bag of 50 Kgs Cement add required water to make slurry form.After completion of grouting, Remove the Rubber nozzles e]. Later sealing of the hole with polymer cement putty .
100
196
19655
... More
Ultrasonic Pulse Velocity Tests Conducting Ultrasonic Pulse Velocity Tests on the Concrete Slab for retrofitting works including cost of labour,material etc complete as directed by the Engineering in-charge for retrofitting works
100
600
60000
... More
Rebound Hammer Test Conducting Rebound Hammer Test the concrete Surface for retrofitting works including cost of labour,material etc complete as directed by the Engineering in-charge for retrofitting works
100
500
50000
... More
Providing and applying Black Bitumen coating Outside of Ductile iron Pipes including all material and labour and machinery etc., complete, with all taxes, insurance, freight charges, inspection charges, transportation, etc. complete including all labour, materials and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge.200mm Dia
953.98
171
163130.58
... More
Providing and applying Black Bitumen coating Outside of Ductile iron Pipes including all material and labour and machinery etc., complete, with all taxes, insurance, freight charges, inspection charges, transportation, etc. complete including all labour, materials and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge.250mm Dia
53.22
171
9100.62
... More
Providing and applying Black Bitumen coating Outside of Ductile iron Pipes including all material and labour and machinery etc., complete, with all taxes, insurance, freight charges, inspection charges, transportation, etc. complete including all labour, materials and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge.300mm Dia
117.32
171
20061.72
... More
Providing and applying Black Bitumen coating Outside of Ductile iron Pipes including all material and labour and machinery etc., complete, with all taxes, insurance, freight charges, inspection charges, transportation, etc. complete including all labour, materials and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge.400mm Dia
330.54
171
56522.34
... More
Providing and applying Black Bitumen coating Outside of Ductile iron Pipes including all material and labour and machinery etc., complete, with all taxes, insurance, freight charges, inspection charges, transportation, etc. complete including all labour, materials and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge.500mm Dia
1545.34
171
264253.14
... More
Providing and applying Black Bitumen coating Outside of Ductile iron Pipes including all material and labour and machinery etc., complete, with all taxes, insurance, freight charges, inspection charges, transportation, etc. complete including all labour, materials and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge.600mm Dia
4396.41
171
751786.11
... More
Providing and applying Black Bitumen coating Outside of Ductile iron Pipes including all material and labour and machinery etc., complete, with all taxes, insurance, freight charges, inspection charges, transportation, etc. complete including all labour, materials and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge.700mm Dia
1118.81
171
191316.51
... More
Providing and applying Black Bitumen coating Outside of Ductile iron Pipes including all material and labour and machinery etc., complete, with all taxes, insurance, freight charges, inspection charges, transportation, etc. complete including all labour, materials and ROU/ROW as per specification and to the satisfaction of Engineer-in-charge.800mm Dia
2568.3
171
439179.3
... More
Cleaning and Chocked Pipe line by diesel running vehicle mounted hydraulic operated high pressure suction cum jetting cleaning machine fitted with pump having 4000 litre suction capacity and 6000 litre water tank capacity including skilled operator supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of Pipe lines.Dechocking and flusing of sewer line from one manhole to another by high pressure jetting systemof 2200 PSI for Pipe line 250mm Dia
167
274
45899.95
... More
Cleaning and Chocked Pipe line by diesel running vehicle mounted hydraulic operated high pressure suction cum jetting cleaning machine fitted with pump having 4000 litre suction capacity and 6000 litre water tank capacity including skilled operator supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of Pipe lines.Dechocking and flusing of sewer line from one manhole to another by high pressure jetting systemof 2200 PSI for Pipe line 600mm Dia
720
549
395784
... More
Cleaning and Chocked Pipe line by diesel running vehicle mounted hydraulic operated high pressure suction cum jetting cleaning machine fitted with pump having 4000 litre suction capacity and 6000 litre water tank capacity including skilled operator supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of Pipe lines.Dechocking and flusing of sewer line from one manhole to another by high pressure jetting systemof 2200 PSI for Pipe line 700mm Dia
500
641
320660
... More
Conducting Hydralic field test pressure for all types of pipelines and all dia's with required pressure including all machineary ,materials & manpower transportation of Water all complete etc., as per specification and to the satisfaction of Engineer-in-charge.250
167
19
3306.6
... More
Conducting Hydralic field test pressure for all types of pipelines and all dia's with required pressure including all machineary ,materials & manpower transportation of Water all complete etc., as per specification and to the satisfaction of Engineer-in-charge.600
720
47
34214.4
... More
Conducting Hydralic field test pressure for all types of pipelines and all dia's with required pressure including all machineary ,materials & manpower transportation of Water all complete etc., as per specification and to the satisfaction of Engineer-in-charge.700
500
55
27720
... More
Manufacture, supply, & delivery of (DWC) structured wall polyethylene/polypropylene piping system with nonsmooth external annular corrugated and smooth internal surface (Double Wall) for nonpressure sewage & Drainage application pipes of standard length 6 m, grade conforming to IS 16098 (part-II: 2013) including transportation to anywhere in A.P, as directed by the Engineer-in-charge.
For OD 250mm DWC Pipe
50.1
602
30168.22
... More
Manufacture, supply, & delivery of fittings & accessories compatible with DWC pipe - non smooth External Annular Corrugated and smooth Internal Surfaces (Double Wall) for non-pressure or similar type of class SN8 Structured Wall polythelene piping systems including transportation to anywhere in A.P, excluding GST and other Government duties.
250mm Dia Couplers
50.1
1024
51342.98
... More
Bailing out water from the pipe line trenches with Electric Driven pump set including hire charges, current charges and wages for Driver and Helper .Considering 10 Hp Motor
1000
411
411390
... More
Bailing out water from the pipe line trenches with Electric Driven pump set including hire charges, current charges and wages for Driver and Helper .Considering 20 Hp Motor
1000
540
540790
... More
Bailing out water from the pipe line trenches with oil engine driven pump sets, including hire charges, fuel charges and wages for Driver and Helper .Considering 10 Hp Motor
2000
676
1352960
... More
Bailing out water from the pipe line trenches with oil engine driven pump sets, including hire charges, fuel charges and wages for Driver and Helper .Considering 20 Hp Motor
2000
1009
2018160
... More
Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) (ex-works) Excluding Transportation and all Taxes.
Mechanical Joints Upto 300 mm dia.
1000
154
154020
... More
Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) (ex-works) Excluding Transportation and all Taxes.
Mechanical Joints Above 300 mm dia.
1000
169
169820
... More
Earthwork in excavation as per technical specifications Clause 305.1 including setting out, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHa) 0.0 m To 3.0 m Depth Earthwork for Temporary Channel Dewatering
24000
133
3210480
... More
Providing & laying Sand filling in trenches including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge. Replacement of Sand for stabilization on Loose Soil
5000
620
3102900
... More
Environmental and Social Management Plan as per standard norms and guidelines including cost of all materials, machinery, labour, all operations for finished item of work, as directed by Engineer in Charge
1
24290938
24290938.05
... More
Arrangement of transportation facility by four wheeler for purpose of site inspection and official use of the departmental officers and Engineers during execution period including fuel, maintenance charges & driver charges and the vehicle for not less than 3500 Km per Month and the vehicle should not be older than 5 years.
24
45000
1080000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements