Agricultural Marketing Department Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Agricultural Marketing Department - AMD Tender
Building Construction
Civil Works
Opening Date14 Aug 2021
Closing Date3 Sep 2021
Tender Amount₹ 14,81,11,593
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
₹ 10,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
436581Bid Award Id
ViewTender No
SE(AM)/AP/GNT/Ep/17/13/2021-22, Dt.11-8-2021Tender Authority
Agricultural Marketing Department ViewPurchaser Address
-Website
http://http://agricoop.nic.in/divisiontype/agricultural-marketing
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
716.55
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
3652.22
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
320.03
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
7737.4
For Pedestals
2.5
-
8236.17
For GL Beam
15
-
10123.31
For Columns
2
-
10372.56
For Lintel Beam
2.1
-
10562.31
Sunshades 75 mm thick
9.8
-
907.9
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6289.3
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
294.06
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
846.87
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5150.86
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.5
-
601.19
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2378.76
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
5150.86
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
885.27
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
3863.12
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
304.7
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
7948.3
For Pedestals
2.5
-
8447.07
For GL Beam
15
-
10334.21
For Columns
2
-
10583.46
For Lintel Beam
2.1
-
10773.21
Sunshades 75 mm thick
9.8
-
921.08
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6254.89
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
296.72
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
996.84
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5368.08
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.5
-
581.56
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2578.22
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
5368.08
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
977.3
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
3970.79
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
335.37
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8055.97
For Pedestals
2.5
-
8554.74
For GL Beam
15
-
10441.89
For Columns
2
-
10691.14
For Lintel Beam
2.1
-
10880.88
Sunshades 75 mm thick
9.8
-
927.81
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6150.44
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
298.17
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
1070.46
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5478.98
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.5
-
620.83
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2676.14
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
5478.98
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
900.61
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
3892.11
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
304.7
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
7977.29
For Pedestals
2.5
-
8476.06
For GL Beam
15
-
10363.2
For Columns
2
-
10612.45
For Lintel Beam
2.1
-
10802.2
Sunshades 75 mm thick
9.8
-
922.89
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6119.85
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
296.96
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
1021.38
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5397.94
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.5
-
581.56
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2610.86
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
5397.94
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
915.95
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
3887.97
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
320.03
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
7973.15
For Pedestals
2.5
-
8471.91
For GL Beam
15
-
10359.06
For Columns
2
-
10608.31
For Lintel Beam
2.1
-
10798.06
Sunshades 75 mm thick
9.8
-
922.63
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6310.24
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
297.2
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
1009.11
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5393.67
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.5
-
601.19
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2594.54
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
5393.67
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
1064.1
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
4009.86
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
304.7
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8095.03
For Pedestals
2.5
-
8593.8
For GL Beam
15
-
10480.95
For Columns
2
-
10730.2
For Lintel Beam
2.1
-
10919.94
Sunshades 75 mm thick
9.8
-
930.26
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6228.59
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
299.54
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
1070.46
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5519.21
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.5
-
581.56
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2676.14
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
5519.21
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
1636.72
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
4333.79
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
304.7
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8418.97
For Pedestals
2.5
-
8917.74
For GL Beam
15
-
10804.89
For Columns
2
-
11054.14
For Lintel Beam
2.1
-
11243.88
Sunshades 75 mm thick
9.8
-
950.5
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6181.64
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
308.56
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
1144.08
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5852.87
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.5
-
581.56
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2774.06
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
5852.87
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
1853.04
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
4729.31
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8814.49
For Pedestals
2.5
-
9313.26
For GL Beam
15
-
11200.4
For Columns
2
-
11449.65
For Lintel Beam
2.1
-
11639.4
Sunshades 75 mm thick
9.8
-
975.21
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6195.9
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
311.96
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
1475.39
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
6260.25
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
46.5
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
3214.69
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
6260.25
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
1725.79
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
4340.75
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
320.03
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8425.92
For Pedestals
2.5
-
8924.69
For GL Beam
15
-
10811.84
For Columns
2
-
11061.09
For Lintel Beam
2.1
-
11250.84
Sunshades 75 mm thick
9.8
-
950.93
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6182.54
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
309.96
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
1107.27
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5860.03
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.5
-
601.19
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2725.1
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
5860.03
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
1254.97
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
4007.4
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
304.7
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8092.58
For Pedestals
2.5
-
8591.35
For GL Beam
15
-
10478.49
For Columns
2
-
10727.74
For Lintel Beam
2.1
-
10917.49
Sunshades 75 mm thick
9.8
-
930.1
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6135.92
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
302.54
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
972.3
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5516.68
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.5
-
581.56
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2545.58
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
5516.68
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
946.62
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
4100.55
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8185.73
For Pedestals
2.5
-
8684.5
For GL Beam
15
-
10571.65
For Columns
2
-
10820.9
For Lintel Beam
2.1
-
11010.64
Sunshades 75 mm thick
9.8
-
935.93
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6302.19
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
297.69
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
1229.98
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5612.63
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.5
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2888.29
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
5612.63
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
946.62
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
4078.47
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
335.37
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8163.64
For Pedestals
2.5
-
8662.41
For GL Beam
15
-
10549.56
For Columns
2
-
10798.81
For Lintel Beam
2.1
-
10988.56
Sunshades 75 mm thick
9.8
-
934.54
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6302.19
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
297.69
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
1205.44
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5589.88
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.5
-
620.83
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2855.66
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
5589.88
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
1115
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
4242.58
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
335.37
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8327.76
For Pedestals
2.5
-
8826.53
For GL Beam
15
-
10713.68
For Columns
2
-
10962.93
For Lintel Beam
2.1
-
11152.67
Sunshades 75 mm thick
9.8
-
944.8
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6319.87
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
300.34
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
1303.6
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5758.92
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.5
-
620.83
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2986.21
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
5758.92
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
1023.31
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
4223.41
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
350.71
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8308.59
For Pedestals
2.5
-
8807.36
For GL Beam
15
-
10694.5
For Columns
2
-
10943.75
For Lintel Beam
2.1
-
11133.5
Sunshades 75 mm thick
9.8
-
943.6
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6310.24
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
298.89
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
1328.14
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5739.18
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.5
-
640.46
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
3018.85
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
5739.18
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
1038.65
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
4252.4
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
320.03
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8337.58
For Pedestals
2.5
-
8836.35
For GL Beam
15
-
10723.49
For Columns
2
-
10972.74
For Lintel Beam
2.1
-
11162.49
Sunshades 75 mm thick
9.8
-
945.41
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6113.21
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
299.14
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
1352.68
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5769.03
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.5
-
601.19
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
3051.49
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
5769.03
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
1007.97
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
4216.51
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
350.71
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8301.69
For Pedestals
2.5
-
8800.46
For GL Beam
15
-
10687.6
For Columns
2
-
10936.85
For Lintel Beam
2.1
-
11126.6
Sunshades 75 mm thick
9.8
-
943.16
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6308.63
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
298.65
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
1328.14
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5732.07
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.5
-
640.46
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
3018.85
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
5732.07
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
946.62
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
4100.55
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
350.71
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8185.73
For Pedestals
2.5
-
8684.5
For GL Beam
15
-
10571.65
For Columns
2
-
10820.9
For Lintel Beam
2.1
-
11010.64
Sunshades 75 mm thick
9.8
-
935.93
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6302.19
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
297.69
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
1229.98
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5612.63
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.5
-
640.46
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2888.29
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
5612.63
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
1127.72
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
4347.7
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
350.71
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8432.88
For Pedestals
2.5
-
8931.65
For GL Beam
15
-
10818.79
For Columns
2
-
11068.04
For Lintel Beam
2.1
-
11257.79
Sunshades 75 mm thick
9.8
-
951.37
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6321.21
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
300.54
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
1414.03
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5867.19
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.5
-
640.46
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
3133.09
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
5867.19
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
1115
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
4386.15
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
320.03
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8471.32
For Pedestals
2.5
-
8970.09
For GL Beam
15
-
10857.24
For Columns
2
-
11106.49
For Lintel Beam
2.1
-
11296.24
Sunshades 75 mm thick
9.8
-
953.78
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6118.41
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
300.34
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
1463.12
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5906.79
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.5
-
601.19
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
3198.37
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
5906.79
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
1102.27
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
4325.21
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
320.03
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8410.38
For Pedestals
2.5
-
8909.15
For GL Beam
15
-
10796.3
For Columns
2
-
11045.55
For Lintel Beam
2.1
-
11235.29
Sunshades 75 mm thick
9.8
-
949.96
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6117.07
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
300.14
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
1401.76
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5844.02
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.5
-
601.19
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
3116.77
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
5844.02
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
961.96
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
4173.72
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
350.71
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8258.89
For Pedestals
2.5
-
8757.66
For GL Beam
15
-
10644.81
For Columns
2
-
10894.06
For Lintel Beam
2.1
-
11083.8
Sunshades 75 mm thick
9.8
-
940.49
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6303.8
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
297.93
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
1303.6
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5688
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.5
-
640.46
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2986.21
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
5688
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
1178.62
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
4436.87
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
350.71
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8522.04
For Pedestals
2.5
-
9020.81
For GL Beam
15
-
10907.96
For Columns
2
-
11157.21
For Lintel Beam
2.1
-
11346.95
Sunshades 75 mm thick
9.8
-
956.95
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6326.55
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
301.34
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
1487.66
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5959.03
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.5
-
640.46
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
3231.01
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
5959.03
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
4
-
1165.9
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4055.66
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
320.03
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8140.84
For Pedestals
3.3
-
8639.61
For GL Beam
15
-
10526.76
For Columns
2
-
10776.01
For Lintel Beam
2.1
-
10965.75
Sunshades 75 mm thick
9.8
-
933.12
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6139.25
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
301.14
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
1070.46
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5566.4
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
490
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
70
-
601.19
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2676.14
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
46.2
-
5566.4
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
4
-
1216.8
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
3957.09
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
320.03
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8042.27
For Pedestals
3.3
-
8541.04
For GL Beam
15
-
10428.18
For Columns
2
-
10677.43
For Lintel Beam
2.1
-
10867.18
Sunshades 75 mm thick
9.8
-
926.95
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6129.1
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
301.94
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
935.49
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5464.87
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
490
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
70
-
601.19
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2496.62
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
46.2
-
5464.87
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
4
-
1318.6
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
3856.68
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
320.03
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
7941.86
For Pedestals
3.3
-
8440.63
For GL Beam
15
-
10327.77
For Columns
2
-
10577.02
For Lintel Beam
2.1
-
10766.77
Sunshades 75 mm thick
9.8
-
920.68
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6155.28
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
303.55
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
773.02
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5361.44
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
490
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
70
-
601.19
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2280.54
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
46.2
-
5361.44
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
4
-
869.93
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
3614.9
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
274.02
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
7700.08
For Pedestals
3.3
-
8198.85
For GL Beam
15
-
10085.99
For Columns
2
-
10335.24
For Lintel Beam
2.1
-
10524.99
Sunshades 75 mm thick
9.8
-
905.57
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6077.18
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
296.48
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
728.71
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5112.42
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
490
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
70
-
542.3
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2221.61
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
46.2
-
5112.42
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
1331.32
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
4052.8
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
274.02
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8137.98
For Pedestals
2.5
-
8636.75
For GL Beam
15
-
10523.89
For Columns
2
-
10773.14
For Lintel Beam
2.1
-
10962.89
Sunshades 75 mm thick
9.8
-
932.94
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6125.62
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
303.75
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
984.57
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5563.45
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.5
-
542.3
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2561.9
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
5563.45
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
1293.15
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
4256.49
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
274.02
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8341.67
For Pedestals
2.5
-
8840.44
For GL Beam
15
-
10727.58
For Columns
2
-
10976.83
For Lintel Beam
2.1
-
11166.58
Sunshades 75 mm thick
9.8
-
945.66
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6121.62
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
303.14
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
1229.98
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5773.25
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.5
-
542.3
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2888.29
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
5773.25
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
1153.17
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
3915.17
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8000.34
For Pedestals
2.5
-
8499.11
For GL Beam
15
-
10386.26
For Columns
2
-
10635.51
For Lintel Beam
2.1
-
10825.26
Sunshades 75 mm thick
9.8
-
924.34
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6106.92
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
300.94
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
920.72
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5421.68
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.5
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2476.98
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
5421.68
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
992.64
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
3933.52
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8018.7
For Pedestals
2.5
-
8517.47
For GL Beam
15
-
10404.61
For Columns
2
-
10653.86
For Lintel Beam
2.1
-
10843.61
Sunshades 75 mm thick
9.8
-
925.49
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6090.06
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
298.41
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
1021.38
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5440.6
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.5
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2610.86
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
5440.6
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
1089.55
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
3820.07
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
7905.25
For Pedestals
2.5
-
8404.02
For GL Beam
15
-
10291.16
For Columns
2
-
10540.41
For Lintel Beam
2.1
-
10730.16
Sunshades 75 mm thick
9.8
-
918.4
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6100.24
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
299.94
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
846.87
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5323.74
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.5
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2378.76
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
5323.74
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
1089.55
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
4109.65
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8194.83
For Pedestals
2.5
-
8693.6
For GL Beam
15
-
10580.75
For Columns
2
-
10830
For Lintel Beam
2.1
-
11019.74
Sunshades 75 mm thick
9.8
-
936.49
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6100.24
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
299.94
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
1168.62
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5622.01
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.5
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2806.7
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
5622.01
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
1007.97
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
3929.38
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8014.56
For Pedestals
2.5
-
8513.33
For GL Beam
15
-
10400.47
For Columns
2
-
10649.72
For Lintel Beam
2.1
-
10839.47
Sunshades 75 mm thick
9.8
-
925.22
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6097.31
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
298.65
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
1009.11
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5436.32
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.5
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2594.54
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
5436.32
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
1089.55
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
4054.44
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8139.61
For Pedestals
2.5
-
8639.38
For GL Beam
15
-
10525.53
For Columns
2
-
10774.78
For Lintel Beam
2.1
-
10964.53
Sunshades 75 mm thick
9.8
-
933.04
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6100.24
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
299.94
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
1107.27
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5565.13
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.5
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2725.1
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
5565.13
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
1089.55
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
3859.95
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
7945.13
For Pedestals
2.5
-
8443.9
For GL Beam
15
-
10331.04
For Columns
2
-
10580.29
For Lintel Beam
2.1
-
10770.04
Sunshades 75 mm thick
9.8
-
920.88
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6100.24
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
299.94
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
891.18
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5364.81
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.5
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2437.69
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
5364.81
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
1064.1
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
4087.16
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8172.33
For Pedestals
2.5
-
8671.1
For GL Beam
15
-
10558.25
For Columns
2
-
10807.5
For Lintel Beam
2.1
-
10997.25
Sunshades 75 mm thick
9.8
-
935.09
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6103.2
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
299.54
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
1156.35
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5598.83
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.5
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2790.38
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
5598.83
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
1089.55
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
3859.95
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
7945.13
For Pedestals
2.5
-
8443.9
For GL Beam
15
-
10331.04
For Columns
2
-
10580.29
For Lintel Beam
2.1
-
10770.04
Sunshades 75 mm thick
9.8
-
920.88
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6100.24
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
299.94
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
891.18
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5364.81
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.5
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2437.69
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
5364.81
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
1007.97
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
3929.38
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8014.56
For Pedestals
2.5
-
8513.33
For GL Beam
15
-
10400.47
For Columns
2
-
10649.72
For Lintel Beam
2.1
-
10839.47
Sunshades 75 mm thick
9.8
-
925.22
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6097.31
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
298.65
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
1009.11
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5436.32
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.5
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2594.54
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
5436.32
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
977.3
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
3796.15
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
7881.32
For Pedestals
2.5
-
8380.09
For GL Beam
15
-
10267.24
For Columns
2
-
10516.49
For Lintel Beam
2.1
-
10706.23
Sunshades 75 mm thick
9.8
-
916.9
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6088.45
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
298.17
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
876.41
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5299.09
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.5
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2418.05
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
5299.09
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
747.23
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
3533.1
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
7618.27
For Pedestals
2.5
-
8117.04
For GL Beam
15
-
10004.19
For Columns
2
-
10253.44
For Lintel Beam
2.1
-
10443.19
Sunshades 75 mm thick
9.8
-
900.46
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6051.61
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
294.55
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
699.17
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5028.16
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.5
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2182.32
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
5028.16
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
869.93
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
3521.85
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
7607.03
For Pedestals
2.5
-
8105.8
For GL Beam
15
-
9992.94
For Columns
2
-
10242.19
For Lintel Beam
2.1
-
10431.94
Sunshades 75 mm thick
9.8
-
899.75
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6077.18
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
296.48
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
625.32
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5016.57
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.5
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2084.1
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
5016.57
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
1064.1
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
4252.81
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
350.71
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8337.99
For Pedestals
2.5
-
8836.76
For GL Beam
15
-
10723.9
For Columns
2
-
10973.15
For Lintel Beam
2.1
-
11162.9
Sunshades 75 mm thick
9.8
-
945.44
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6314.53
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
299.54
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
1340.41
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5769.46
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.5
-
640.46
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
3035.17
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
5769.46
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with sand / Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Sand filling Rate)
3.24
-
961.96
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
4096.41
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel /sand /dust from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers. (Gravel filling rate)
227
-
335.37
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8181.59
For Pedestals
2.5
-
8680.36
For GL Beam
15
-
10567.5
For Columns
2
-
10816.75
For Lintel Beam
2.1
-
11006.5
Sunshades 75 mm thick
9.8
-
935.66
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicinggrade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 200mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength
31.5
-
6303.8
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
297.93
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, stacking charges and including Cost and Conveyance of all materials and labour charges, stacking to departmental gauge and labour charges etc., complete.
29
-
1217.71
Providing Polythene sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 20mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
35.5
-
5608.37
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Roofing: - Roofing will be Provided with 0.5mm thick galvanized / prepainted G.I. profiled sheets fixed to the purlins with14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. Endlapsare to be sealed with 25 x 3 mm Buty l tape. The sheets are provided withanticapillarygrove.
550
-
863.47
Connection bolts and Hot Rolled Sections
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in pl;ace method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.5
-
620.83
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2871.97
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.
42
-
5608.37
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements