Agricultural Marketing Department Tender

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T P etc., complete for finished item of work. (APSS NO. 309 310) - Earth filling (ordinary soil)

Brick Masonry in CM (1:6) with Bricks with traditional size 23 x 11 x 7 cms 2nd class: Brick Masonry 230 mm thick with Cement Mortar (1:6) prop. (Cement:Sand) using Common Burnt Clay Bricks Non-Modular of traditional size 23 x 11 x 7 cm 2nd Class from approved source having minimum crushing strength of not less than 3.5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., but excluding seigniorage charges, complete as per drawing and Technical specifications cluase APSS 504 for finished item of work or as directed by Engineer-in Charge for panel walls in Super-Structure, parapet walls.

Supply fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end- locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside outside locking with push Pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108

Wrought iron and mild steel welded work (using angles, square bars, tees and channel grills, grating frames, gates and tree guards of any size and design etc. including cost of screens and welding rods or bolts and nuts complete fixed in position but without the cost of excavation and concrete for fixing which will be paid separately - MORTH

Plastering 12 mm thick in single coat in CM (1:3) including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting Grooves etc., but excluding seigniorage charges, sales other taxes on all materials, complete as per the drawing, technical specification clauses APSS 901, 903 904 for finished item of work or as directed by the Engineer-in-Charge for Brick Wall and RCC exposed faces.

Plastering 12 mm thick in single coat in CM (1:5) including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting Grooves etc., but excluding seigniorage charges, sales other taxes on all materials, complete as per the drawing, technical specification clauses APSS 901, 903 904 for finished item of work or as directed by the Engineer-in-Charge for Brick Wall and RCC exposed faces.

Plastering 20 mm thick in single coat in CM (1:5) including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting Grooves etc., but excluding seigniorage charges, sales other taxes on all materials, complete as per the drawing, technical specification clauses APSS 901, 903 904 for finished item of work or as directed by the Engineer-in-Charge for Brick Wall and RCC exposed faces.

Providing concrete for plain concrete in open foundations using 40 mm Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 1500, 1700 2100 MORTH. - P.C.C. grade M 20 (Design Mix) MORTH 12.8 B using 40 mm Graded Metal

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 400.12 and Technical Specification Clause 406 MORD/MORTH - By Mechanical Works with 1 Km lead Rural Works

Construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base,as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates conforming to IS : 383, maximum size of corse aggregate not exceeding 25mm and cement content in the mix to be not less than 330 kg/cum (Ordinary Portland Cement) with minimum water cement ratio of 0.45, mixed in a concrete mixer and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and construction joints, applying debonding strips, primer, bitumenous sealant, add mixers as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501.2.2 including cost of all materials, labour, conveyance, hire charges of machinaries etc., complete as per direction of Engineer-In-Charge for CC payment inculding overheads, contractor profit but excluding seignorage charges and GST for 170mm thick with 3.25m joint spacing

Painting with Ready mixed oil paint (all colours) Two Coats - Old Wood Work New Iron Work using ready mixed Synthetic Enamel paint in all shades Grade-II including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 1212 or as directed by the Engineer-In-Charge

Exterior walls are painted with one coast of primer and 2 coats of exterior emulsion paint .

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308) - in Ordinary soils-Mechcanical Means-Upto 3 m depth

VRCC M-25 Grade - Supply and placing of the DESIGN MIX CONCRETE (WEIGH BATCH at SITE) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement with minimum cement content as per IS code from standard suppliers approved by the department, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work (APSS No. 402) or as directed by Engineer-in-Charge but including centering scaffolding, shuttering for FOOTINGS

VRCC M-25 Grade - Supply and placing of the DESIGN MIX CONCRETE (BATCHING PLANT at SITE) corresponding to IS 456 using BATCHING PLANT, TRANSIT MIXER AND CONCRETE PLACER PUMP with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement with minimum cement content as per IS code from standard suppliers approved by the department, fine aggregate (sand), coarse aggregate, water, admixtures etc., to site and including all operational, incidental and all labour charges such as weigh batching, machine mixing, pumping, laying concrete, vibrating, curing etc., but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work (APSS No. 402) or as directed by Engineer-in-Charge but including centering scaffolding, shuttering for PEDESTALS (below plinth)

VRCC M-25 Grade - Supply and placing of the DESIGN MIX CONCRETE (WEIGH BATCH at SITE) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement with minimum cement content as per IS code from standard suppliers approved by the department, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work (APSS No. 402) or as directed by Engineer-in-Charge but including centering scaffolding, shuttering for PLINTH BEAM

VRCC M-25 Grade - Supply and placing of the DESIGN MIX CONCRETE (WEIGH BATCH at SITE) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement with minimum cement content as per IS code from standard suppliers approved by the department, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work (APSS No. 402) or as directed by Engineer-in-Charge but including Steel centering scaffolding, shuttering-Unsupported height upto 3.66mts for COLUMNS

VRCC M-25 Grade - Supply and placing of the DESIGN MIX CONCRETE (WEIGH BATCH at SITE) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement with minimum cement content as per IS code from standard suppliers approved by the department, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work (APSS No. 402) or as directed by Engineer-in-Charge but including Steel centering scaffolding, shuttering-Unsupported height upto 3.66mts for LINTELS

VRCC M-25 Grade - Supply and placing of the DESIGN MIX CONCRETE (WEIGH BATCH at SITE) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement with minimum cement content as per IS code from standard suppliers approved by the department, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work (APSS No. 402) or as directed by Engineer-in-Charge but including Wooden centering scaffolding, shuttering-Unsupported height upto 3.66mts for BEAMS

VRCC M-25 Grade - Supply and placing of the DESIGN MIX CONCRETE (WEIGH BATCH at SITE) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement with minimum cement content as per IS code from standard suppliers approved by the department, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work (APSS No. 402) or as directed by Engineer-in-Charge but including Steel centering scaffolding, shuttering-Unsupported height upto 3.66mts for SLABS 125mm thick

VRCC M20 Nominal Mix (Cement:Fine aggregate: Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine cru shed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as machine mixing, laying concrete, curing etc.,but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work or as directed by Engineer-in- Charge, but including Steel Centering Scaffolding, Shuttering-Unsupported height upto 3.66mts for BEAMS

Brick Masonry in CM (1:6) with Bricks with traditional size 23 x 11 x 7 cms 2nd class: Brick Masonry 230 mm thick with Cement Mortar (1:6) prop. (Cement:Sand) using Common Burnt Clay Bricks Non-Modular of traditional size 23 x 11 x 7 cm 2nd Class from approved source having minimum crushing strength of not less than 3.5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., but excluding seigniorage charges, complete as per drawing and Technical specifications cluase APSS 504 for finished item of work or as directed by Engineer-in Charge for panel walls in Super-Structure, parapet walls.

Plastering 12 mm thick in single coat in CM (1:5) including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting Grooves etc., but excluding seigniorage charges, sales other taxes on all materials, complete as per the drawing, technical specification clauses APSS 901, 903 904 for finished item of work or as directed by the Engineer-in-Charge for Brick Wall and RCC exposed faces.

Plastering 20 mm thick in single coat in CM (1:5) including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting Grooves etc., but excluding seigniorage charges, sales other taxes on all materials, complete as per the drawing, technical specification clauses APSS 901, 903 904 for finished item of work or as directed by the Engineer-in-Charge for Brick Wall and RCC exposed faces.

VRCC M-25 Grade - Supply and placing of the DESIGN MIX CONCRETE (WEIGH BATCH at SITE) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement with minimum cement content as per IS code from standard suppliers approved by the department, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work (APSS No. 402) or as directed by Engineer-in-Charge but including Steel centering scaffolding, shuttering-Unsupported height upto 3.66mts for COLUMNS