Agricultural Marketing Department Tender

Water Facillity;Supply and Delivery of 80mm dia CI D/F pipes 0.90 mts long, including cost and conveyance of all materials to work stie and all labour charges etc., complete for finished item of work inlet, outlet, Scour and overflow including CP.

Water Facillity;Supply and Delivery of 80mm dia CI D/F bends, including cost and conveyance of all materials to work stie and all labour charges etc., complete for finished item of work inlet, outlet, Scour and overflow including CP.

Water Facillity;Supply and fixing of 80mm dia C.I.D/F Sluice valves, (PN 1.00) including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work for over flow, inlet, outlet including CP

Water Facillity;Supply and fixing of 6mm thick Rubber Packing, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work.

Water Facillity;Supply and fixing of 100X16mm Bolt and Nuts, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work.

Water Facillity;Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308) - in Ordinary Soil-Manual Means-Upto 3M depth

Water Facillity;Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD/304 MORTH - Sand filling

Water Facillity;Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T P etc., complete for finished item of work. (APSS NO. 309 310) - Earth filling (ordinary soil)

Water Facillity;Plain Cement concrete (1:4:8) using 40 mm metal with hand mixing upto Plinth level: PCC (1:4:8) Nominal Mix (Cement:Fine aggregate: Coarse aggregate) corresponding to Table 9 of IS 456 using 40mm size nominal machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as hand mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials for finished item of work, but excluding Centering Scaffolding, Shuttering

Water Facillity;Plain Cement concrete (M 20) Nominal Mix using 20mm metal using concrete mixer: PCC M20 Nominal Mix (Cement:Fine aggregate: Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials for finished item of work, but excluding Centering Scaffolding, Shuttering

Water Facillity;Brick Masonry in CM (1:6) with Bricks with traditional size 23 x 11 x 7 cms 2nd class: Brick Masonry 230 mm thick with Cement Mortar (1:6) prop. (Cement:Sand) using Common Burnt Clay Bricks Non-Modular of traditional size 23 x 11 x 7 cm 2nd Class from approved source having minimum crushing strength of not less than 3.5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., but excluding seigniorage charges, complete as per drawing and Technical specifications cluase APSS 504 for finished item of work or as directed by Engineer-in Charge for panel walls in Super-Structure, parapet walls.

Water Facillity;Plastering 12 mm thick in single coat in CM (1:5) including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting Grooves etc., but excluding seigniorage charges, sales other taxes on all materials, complete as per the drawing, technical specification clauses APSS 901, 903 904 for finished item of work or as directed by the Engineer-in-Charge for Brick Wall and RCC exposed faces.

Water Facillity;Plastering 20 mm thick in single coat in CM (1:5) including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting Grooves etc., but excluding seigniorage charges, sales other taxes on all materials, complete as per the drawing, technical specification clauses APSS 901, 903 904 for finished item of work or as directed by the Engineer-in-Charge for Brick Wall and RCC exposed faces.

Water Facillity;VRCC M20 Nominal Mix (Cement:Fine aggregate: Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine cru shed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as machine mixing, laying concrete, curing etc.,but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work or as directed by Engineer-in- Charge, but including Steel Centering Scaffolding, Shuttering-Unsupported height upto 3.66mts for LINTELS

Water Facillity;VRCC M20 Nominal Mix (Cement:Fine aggregate: Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine cru shed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as machine mixing, laying concrete, curing etc.,but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work or as directed by Engineer-in- Charge, but including Steel Centering Scaffolding, Shuttering-Unsupported height upto 3.66mts for Sun Shade/Chajja of Slab Average thickness of 62.50mm

Water Facillity;VRCC M20 Nominal Mix (Cement:Fine aggregate: Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine cru shed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as machine mixing, laying concrete, curing etc.,but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work or as directed by Engineer-in- Charge, but including Steel Centering Scaffolding, Shuttering-Unsupported height upto 3.66mts for SLAB 125mm thick

Water Facillity;SF HYSD bars (Lap splicing) - Providing High Yield Strength Deformed (HYSD) (Fe 415 grade as per IS 1786-1979) of different d iameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for rein forcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying excluding sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Water Facillity;Ornamental plastering to ceiling 12 mm thick in two coats with base coat of 8 mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer - in - charge etc., complete but excluding seigniorage charges, sales other taxes on all materials, as per the drawing, technical specification for finished item of work or as directed by the Engineer-in-Charge (APSS 901, 903 904) for RCC expose faces of ceiling.

Water Facillity;Supplying and fixing of Mild Steel Hallow single rebate general purpose door frames manufactured using cold roll formed process steel sheet of 1.25 mm thick bright (Cold Rolled Close Annealed (CRCA) and profile-B of size 105 x 60 mm conforming to IS 4351 - 2003 including pretreatment, phosphating with Hinges, Base Ties, Holdfast Lugs, Mortar Guards, shock absorbers and provision for Tower Bolts, Aldrops, Lock Strike plates etc. for double shutter door of size 1.50m x 2.55m including Flush door shutters of 35mm thick solid bond wood block board type with commercial ply on both faces conforming to IS:2202 and fixed fan light of 450mm height with plain float glass of 4mm thick as per drawing including cost of fixtures of 4 Nos. MS-Powder coated Tower Bolt-10 mm (IS:204) 250 mm Long, 4 No's. MS-Powder coated Door Handles(IS:208) 150 mm long, 2 No's. MS-Powder coated Aldrop (IS:2681) 300 mm long, 2 No's. MS-Powder coated Door Stoppers and 2 Nos. Rubber/Nylon door stop bushes including fixing the fixtures to door with required no. of screws, bolts and nuts including all Labour charges for wrought and put up, fixing in position frames of any size, shutters for doors, fixing glass, including cost conveyance of all materials, and all operational incidental charges etc., complete, as per drawing and Technical Specifications for finished item of work or as directed by the Engineer-in-Charge. as per APSS 1001 1002

Water Facillity;Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) sliding windows two track sliding duly manufactured using UPVC reinforced profiles of (62 mm x 60 mm)/(60 mm x 45 mm) x 2.0 mm for outer frames, (66 mm x 38 mm)/(58 mm x 39 mm) x 2.0 mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm prefabricated &welded through fusion welding the window sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with TPV Gaskets/ EPDM weathering seal resistant accessories like locking system 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work

Water Facillity;Painting:-2) Exterior walls are painted with one coast of primer and 2 coats of exterior emulsion paint .

Water Facillity;Supply and Fixing of Premium make CPVC Pipes and Fittings of dia 54mm ODPipe - SDR 13.5 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007)

Water Facillity;Supply and Fixing of Premium make CPVC Pipes and Fittings of dia 28.60mm ODPipe - SDR 13.5 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007)

Water Facillity;Supply and Fixing of Premium make CPVC Pipes and Fittings of dia 15.90mm OD Pipe - SDR 13.5 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007)

Water Facillity;Supplying Fixing 12.7 mm N.P bib tap Indian make heavy dutys

Water Facillity;Supply and Delivery of 80mm dia Bell Mouths, including cost and conveyance of all materials to work stie and all labour charges etc., complete for finished item of work for inlet, outlet, Scour and overflow including CP.

Water Facillity;Supply and fixing of 80mm dia Non return valves, (D 1.00) including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work for inlet connection including CP.