Agricultural Marketing Department Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Agricultural Marketing Department - AMD Tender
Building Construction
Construction Works
Opening Date14 Aug 2021
Closing Date3 Sep 2021
Tender Amount₹ 34,84,61,971
Costs
EMD
₹ 34,00,000Document Cost
Refer DocumentsTender Fee
₹ 10,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
436461Bid Award Id
ViewTender No
SE(AM)/AP/GNT/Ep/17/07/2021-22, Dt.11-8-2021Tender Authority
Agricultural Marketing Department ViewPurchaser Address
-Website
http://http://agricoop.nic.in/divisiontype/agricultural-marketing
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Sand from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1023.31
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4256.54
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8341.72
For Pedestals
3.3
-
8840.49
For GL Beam
15
-
10727.63
For Columns
2
-
10976.88
For Lintel Beam
2.1
-
11166.63
Sunshades 75 mm thick
9.8
-
945.67
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6080.6
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
298.89
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1364.95
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5773.31
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
66.91
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
33.45
-
3067.81
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
44.61
-
5773.31
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
223.06
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
158.25
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
158.25
-
50
At Budawada (V) of Jaggayyapeta (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Sand from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1089.55
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4231.13
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8316.31
For Pedestals
3.3
-
8815.08
For GL Beam
15
-
10702.22
For Columns
2
-
10951.47
For Lintel Beam
2.1
-
11141.22
Sunshades 75 mm thick
9.8
-
944.08
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6087.56
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
299.94
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1303.6
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5747.13
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.75
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2986.21
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5747.13
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Anumanchipalli (V) of Jaggayyapeta (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Sand from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1023.31
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4146.11
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8231.28
For Pedestals
3.3
-
8730.05
For GL Beam
15
-
10617.2
For Columns
2
-
10866.45
For Lintel Beam
2.1
-
11056.2
Sunshades 75 mm thick
9.8
-
938.77
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6080.6
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
298.89
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1242.25
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5659.56
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.75
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
33.07
-
2904.61
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5659.56
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Pochampalli (V) of Jaggayyapeta (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Sand from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
808.58
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
3894.87
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
7980.05
For Pedestals
3.3
-
8478.82
For GL Beam
15
-
10365.96
For Columns
2
-
10615.21
For Lintel Beam
2.1
-
10804.96
Sunshades 75 mm thick
9.8
-
923.07
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6058.06
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
295.51
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1070.46
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5400.78
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
33.07
-
2676.14
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5400.78
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Tadigadapa (V) of Penamaluru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Sand from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
808.58
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
3795.48
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
550.1
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
7880.66
For Pedestals
3.3
-
8379.43
For GL Beam
15
-
10266.57
For Columns
2
-
10515.82
For Lintel Beam
2.1
-
10705.57
Sunshades 75 mm thick
9.8
-
916.85
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6058.06
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
295.51
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
960.03
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5298.41
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
895.68
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2529.26
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5298.41
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Ganguru (V) of Penamaluru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Sand from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
869.93
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
3889.35
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
626.8
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
7974.53
For Pedestals
3.3
-
8473.3
For GL Beam
15
-
10360.44
For Columns
2
-
10609.69
For Lintel Beam
2.1
-
10799.44
Sunshades 75 mm thick
9.8
-
922.72
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6064.5
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
296.48
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1033.65
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5395.1
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
993.85
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2627.18
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5395.1
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Poranki -1 (V) of Penamaluru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Sand from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
839.26
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
3842.42
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
580.78
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
7927.59
For Pedestals
3.3
-
8426.36
For GL Beam
15
-
10313.51
For Columns
2
-
10562.76
For Lintel Beam
2.1
-
10752.5
Sunshades 75 mm thick
9.8
-
919.78
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6061.28
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
296
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
996.84
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5346.75
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
934.95
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2578.22
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5346.75
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Poranki -2 (V) of Penamaluru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Sand from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
839.26
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
3842.42
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
580.78
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
7927.59
For Pedestals
3.3
-
8426.36
For GL Beam
15
-
10313.51
For Columns
2
-
10562.76
For Lintel Beam
2.1
-
10752.5
Sunshades 75 mm thick
9.8
-
919.78
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6061.28
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
296
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
996.84
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5346.75
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
934.95
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2578.22
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5346.75
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Kanuru -1 (V) of Penamaluru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Sand from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
777.9
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
3770.63
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
519.43
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
7855.82
For Pedestals
3.3
-
8354.58
For GL Beam
15
-
10241.72
For Columns
2
-
10490.97
For Lintel Beam
2.1
-
10680.72
Sunshades 75 mm thick
9.8
-
915.31
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6054.84
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
295.03
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
947.76
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5272.82
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
856.42
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2512.94
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5272.82
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Kanuru -2 (V) of Penamaluru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Sand from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
777.9
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
3770.63
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
519.43
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
7855.81
For Pedestals
3.3
-
8354.58
For GL Beam
15
-
10241.72
For Columns
2
-
10490.97
For Lintel Beam
2.1
-
10680.72
Sunshades 75 mm thick
9.8
-
915.31
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6054.84
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
295.03
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
947.76
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5272.82
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
856.42
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2512.94
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5272.82
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Nawabpeta (V) of Penuganchiprolu (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
115.2
-
202.64
Filling of foundations with Sand from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
6.4
-
777.9
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
6.4
-
3892.11
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
115.2
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
453
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
21
-
7977.29
For Pedestals
5.2
-
8476.06
For GL Beam
22.5
-
10363.2
For Columns
2.5
-
10612.45
For Lintel Beam
3.2
-
10802.2
Sunshades 75 mm thick
17.5
-
922.89
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
4
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
52
-
6054.84
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
640
-
295.03
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
57
-
1082.73
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
566
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
71
-
5397.94
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
173.96
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
173.96
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
17.28
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
61.1
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
490
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
433
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
12
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
920
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
1
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
2
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
112
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
79.2
-
2692.46
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
105.6
-
5397.94
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
528
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
324
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
324
-
50
At Penuganchiprolu (V) of Penuganchiprolu (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
115.2
-
202.64
Filling of foundations with Sand from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
6.4
-
869.93
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
6.4
-
3911.44
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
115.2
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
453
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
21
-
7996.61
For Pedestals
5.2
-
8495.38
For GL Beam
22.5
-
10382.53
For Columns
2.5
-
10631.78
For Lintel Beam
3.2
-
10821.52
Sunshades 75 mm thick
17.5
-
924.1
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
4
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
52
-
6064.5
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
640
-
296.48
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
57
-
1058.19
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
566
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
71
-
5417.85
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
173.96
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
173.96
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
17.28
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
61.1
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
490
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
433
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
12
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
920
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
1
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
2
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
112
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
79.2
-
2659.82
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
105.6
-
5417.85
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
528
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
324
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
324
-
50
At Thotacherla (V) of Penuganchiprolu (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
115.2
-
202.64
Filling of foundations with Sand from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
6.4
-
685.87
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
6.4
-
3704.88
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
115.2
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
453
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
21
-
7790.06
For Pedestals
5.2
-
8288.83
For GL Beam
22.5
-
10175.98
For Columns
2.5
-
10425.23
For Lintel Beam
3.2
-
10614.97
Sunshades 75 mm thick
17.5
-
911.19
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
4
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
52
-
6045.17
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
640
-
293.58
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
57
-
920.72
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
566
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
71
-
5205.1
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
173.96
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
173.96
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
17.28
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
61.1
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
490
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
433
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
12
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
920
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
1
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
2
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
112
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
79.2
-
2476.98
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
105.6
-
5205.1
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
528
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
324
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
324
-
50
At Kachavaram (V) of Ibrahimpatnam (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
536.7
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
3379.97
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Dust from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
536.7
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
7465.15
For Pedestals
3.3
-
7963.92
For GL Beam
15
-
9851.06
For Columns
2
-
10100.31
For Lintel Beam
2.1
-
10290.06
Sunshades 75 mm thick
9.8
-
890.89
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6050
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
294.3
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
536.7
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
4870.43
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
1085.32
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
1966.23
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
4870.43
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Elaprolu (V) of Ibrahimpatnam (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Sand from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
716.55
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
3545.88
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
565.44
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
7631.06
For Pedestals
3.3
-
8129.83
For GL Beam
15
-
10016.97
For Columns
2
-
10266.22
For Lintel Beam
2.1
-
10455.97
Sunshades 75 mm thick
9.8
-
901.25
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6048.39
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
294.06
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
728.71
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5041.32
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
915.32
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2221.61
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5041.32
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Guntupalli (V) of Ibrahimpatnam (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Sand from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
655.2
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
3465.1
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
504.09
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
7550.28
For Pedestals
3.3
-
8049.05
For GL Beam
15
-
9936.19
For Columns
2
-
10185.44
For Lintel Beam
2.1
-
10375.19
Sunshades 75 mm thick
9.8
-
896.21
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6041.95
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
293.1
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
669.63
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
4958.12
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
836.79
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2143.03
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
4958.12
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Ibrahimpatnam (V) of Ibrahimpatnam (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
610.55
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
3398.12
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
565.44
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
7483.3
For Pedestals
3.3
-
7982.07
For GL Beam
15
-
9869.21
For Columns
2
-
10118.46
For Lintel Beam
2.1
-
10308.21
Sunshades 75 mm thick
9.8
-
892.01
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6038.73
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
292.61
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
610.55
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
4889.13
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
915.32
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2064.45
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
4889.13
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Kotikalapudi (V) of Ibrahimpatnam (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
536.7
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
3379.97
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Dust from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
536.7
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
7465.15
For Pedestals
3.3
-
7963.92
For GL Beam
15
-
9851.06
For Columns
2
-
10100.31
For Lintel Beam
2.1
-
10290.06
Sunshades 75 mm thick
9.8
-
890.89
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6050
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
294.3
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
536.7
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
4870.43
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
1069.03
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
1966.23
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
4870.43
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Mulapadu -1 (V) of Ibrahimpatnam (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
536.7
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
3359.27
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Dust from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
536.7
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
7444.44
For Pedestals
3.3
-
7943.21
For GL Beam
15
-
9830.36
For Columns
2
-
10079.61
For Lintel Beam
2.1
-
10269.36
Sunshades 75 mm thick
9.8
-
889.59
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6045.17
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
293.58
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
536.7
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
4849.11
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
1033.11
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
1966.23
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
4849.11
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Mulapadu -2 (V) of Ibrahimpatnam (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
536.7
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
3359.27
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Dust from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
536.7
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
7444.44
For Pedestals
3.3
-
7943.21
For GL Beam
15
-
9830.36
For Columns
2
-
10079.61
For Lintel Beam
2.1
-
10269.36
Sunshades 75 mm thick
9.8
-
889.59
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6045.17
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
293.58
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
536.7
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
4849.11
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
1033.11
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
1966.23
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
4849.11
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Chandarlapadu (V) of Chandarlapadu (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
947.76
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
3945.23
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8030.41
For Pedestals
3.3
-
8529.18
For GL Beam
15
-
10416.32
For Columns
2
-
10665.57
For Lintel Beam
2.1
-
10855.32
Sunshades 75 mm thick
9.8
-
926.21
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6095.58
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
301.14
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
947.76
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5452.65
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2512.94
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5452.65
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Chevuturu (V) of G.Konduru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
566.24
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
3461.78
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
274.02
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
7546.95
For Pedestals
3.3
-
8045.72
For GL Beam
15
-
9932.87
For Columns
2
-
10182.12
For Lintel Beam
2.1
-
10371.86
Sunshades 75 mm thick
9.8
-
896
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6062.89
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
296.24
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
566.24
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
4954.69
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
542.3
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2005.52
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
4954.69
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At G.Konduru (V) of G.Konduru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
519.54
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
3392.14
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
7477.32
For Pedestals
3.3
-
7976.09
For GL Beam
15
-
9863.23
For Columns
2
-
10112.48
For Lintel Beam
2.1
-
10302.23
Sunshades 75 mm thick
9.8
-
891.65
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6056.45
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
295.27
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
519.54
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
4882.97
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
1943.42
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
4882.97
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Kavuluru (V) of G.Konduru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
654.86
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
3500.12
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
442.74
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
7585.3
For Pedestals
3.3
-
8084.07
For GL Beam
15
-
9971.21
For Columns
2
-
10220.46
For Lintel Beam
2.1
-
10410.21
Sunshades 75 mm thick
9.8
-
898.4
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6053.23
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
294.79
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
654.86
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
4994.19
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
758.26
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2123.39
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
4994.19
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Kuntamukkala (V) of G.Konduru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
669.63
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
3589.34
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
335.37
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
7674.51
For Pedestals
3.3
-
8173.28
For GL Beam
15
-
10060.43
For Columns
2
-
10309.68
For Lintel Beam
2.1
-
10499.43
Sunshades 75 mm thick
9.8
-
903.97
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6070.94
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
297.45
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
669.63
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5086.08
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
620.83
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2143.03
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5086.08
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Vellaturu (V) of G.Konduru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
654.86
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
3555.34
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
335.37
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
7640.51
For Pedestals
3.3
-
8139.28
For GL Beam
15
-
10026.43
For Columns
2
-
10275.68
For Lintel Beam
2.1
-
10465.43
Sunshades 75 mm thick
9.8
-
901.84
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6066.11
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
296.72
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
654.86
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5051.06
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
620.83
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2123.39
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5051.06
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Dabbakupalli (V) of Vastavai (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Sand from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
977.3
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4180.62
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8265.79
For Pedestals
3.3
-
8764.56
For GL Beam
15
-
10651.71
For Columns
2
-
10900.96
For Lintel Beam
2.1
-
11090.71
Sunshades 75 mm thick
9.8
-
940.93
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6075.77
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
298.17
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1303.6
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5695.1
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2986.21
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5695.1
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Polampalli (V) of Vastavai (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Sand from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1051.37
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4258.13
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8343.3
For Pedestals
3.3
-
8842.07
For GL Beam
15
-
10729.22
For Columns
2
-
10978.47
For Lintel Beam
2.1
-
11168.21
Sunshades 75 mm thick
9.8
-
945.77
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6083.55
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
299.34
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1352.68
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5774.93
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
67.65
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
33.82
-
3051.49
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
45.1
-
5774.93
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
225.5
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
159
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
159
-
50
At Vastavai (V) of Vastavai (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Sand from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
931.28
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4126.78
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8211.96
For Pedestals
3.3
-
8710.73
For GL Beam
15
-
10597.87
For Columns
2
-
10847.12
For Lintel Beam
2.1
-
11036.87
Sunshades 75 mm thick
9.8
-
937.56
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6070.94
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
297.45
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1266.79
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5639.65
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2937.25
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5639.65
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Nunna-1 (V) of Vijayawada Rural (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Sand from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
793.24
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
3753.2
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
7838.37
For Pedestals
3.3
-
8337.14
For GL Beam
15
-
10224.29
For Columns
2
-
10473.54
For Lintel Beam
2.1
-
10663.29
Sunshades 75 mm thick
9.8
-
914.21
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6056.45
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
295.27
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
920.72
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5254.86
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2476.98
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5254.86
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Nunna-2 (V) of Vijayawada Rural (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Sand from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
793.24
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
3753.2
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
7838.37
For Pedestals
3.3
-
8337.14
For GL Beam
15
-
10224.29
For Columns
2
-
10473.54
For Lintel Beam
2.1
-
10663.29
Sunshades 75 mm thick
9.8
-
914.21
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6056.45
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
295.27
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
920.72
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5254.86
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2476.98
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5254.86
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Nainavaram (V) of Vijayawada Rural (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Sand from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
701.21
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
3645.32
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
304.7
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
7730.5
For Pedestals
3.3
-
8229.27
For GL Beam
15
-
10116.41
For Columns
2
-
10365.66
For Lintel Beam
2.1
-
10555.41
Sunshades 75 mm thick
9.8
-
907.47
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6046.78
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
293.82
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
846.87
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5143.74
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
581.56
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2378.76
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5143.74
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Pathapadu (V) of Vijayawada Rural (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Sand from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
747.23
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
3719.2
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
240.84
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
7804.38
For Pedestals
3.3
-
8303.15
For GL Beam
15
-
10190.29
For Columns
2
-
10439.54
For Lintel Beam
2.1
-
10629.29
Sunshades 75 mm thick
9.8
-
912.09
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6051.61
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
294.55
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
905.95
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5219.84
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
499.83
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2457.33
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5219.84
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Pydurupadu (V) of Vijayawada Rural (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Sand from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
747.23
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
3612.86
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
534.77
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
7698.03
For Pedestals
3.3
-
8196.8
For GL Beam
15
-
10083.95
For Columns
2
-
10333.2
For Lintel Beam
2.1
-
10522.94
Sunshades 75 mm thick
9.8
-
905.44
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6051.61
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
294.55
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
787.79
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5110.31
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
876.05
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2300.18
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5110.31
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Nidamanuru (V) of Vijayawada Rural (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Sand from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
823.92
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
3713.83
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
427.4
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
7799.01
For Pedestals
3.3
-
8297.78
For GL Beam
15
-
10184.92
For Columns
2
-
10434.17
For Lintel Beam
2.1
-
10623.92
Sunshades 75 mm thick
9.8
-
911.75
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6059.67
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
295.75
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
861.64
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5214.31
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
738.62
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2398.4
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5214.31
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Tadepalli (V) of Vijayawada Rural (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Sand from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
731.89
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
3712.3
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
381.39
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
7797.47
For Pedestals
3.3
-
8296.24
For GL Beam
15
-
10183.39
For Columns
2
-
10432.64
For Lintel Beam
2.1
-
10622.39
Sunshades 75 mm thick
9.8
-
911.66
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6050
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
294.3
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
905.95
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5212.73
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
679.72
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2457.33
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5212.73
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Jakkampudi (V) of Vijayawada Rural (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Sand from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
685.87
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
3651.71
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
335.37
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
7736.89
For Pedestals
3.3
-
8235.66
For GL Beam
15
-
10122.8
For Columns
2
-
10372.05
For Lintel Beam
2.1
-
10561.8
Sunshades 75 mm thick
9.8
-
907.86
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6045.17
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
293.58
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
861.64
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5150.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
620.83
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2398.4
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5150.33
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At West Digavalli (V) of Nuzvid (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
3.24
-
1107.27
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
4174.69
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8259.86
For Pedestals
2.5
-
8758.63
For GL Beam
15
-
10645.78
For Columns
2
-
10895.03
For Lintel Beam
2.1
-
11084.78
Sunshades 75 mm thick
9.8
-
940.55
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6115.62
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
304.15
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1107.27
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5688.99
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
550
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
70
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2725.1
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5688.99
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Devaragunta (V) of Nuzvid (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
3.24
-
1107.27
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
4174.69
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8259.86
For Pedestals
2.5
-
8758.63
For GL Beam
15
-
10645.78
For Columns
2
-
10895.03
For Lintel Beam
2.1
-
11084.78
Sunshades 75 mm thick
9.8
-
940.55
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6115.62
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
304.15
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1107.27
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5688.99
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
550
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
70
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2725.1
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5688.99
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Gollapalli (V) of Nuzvid (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
3.24
-
1131.81
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
4202.5
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8287.68
For Pedestals
2.5
-
8786.45
For GL Beam
15
-
10673.59
For Columns
2
-
10922.84
For Lintel Beam
2.1
-
11112.59
Sunshades 75 mm thick
9.8
-
942.29
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6116.95
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
304.35
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1131.81
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5717.64
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
550
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
70
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2757.74
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5717.64
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Mukkalapadu (V) of Nuzvid (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
3.24
-
1082.73
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
4152.6
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8237.78
For Pedestals
2.5
-
8736.55
For GL Beam
15
-
10623.69
For Columns
2
-
10872.94
For Lintel Beam
2.1
-
11062.69
Sunshades 75 mm thick
9.8
-
939.18
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6115.62
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
304.15
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1082.73
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5666.24
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
550
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
70
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2692.46
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5666.24
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Surepalli (V) of Musunuru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1217.71
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4348.52
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8433.69
For Pedestals
3.3
-
8932.46
For GL Beam
15
-
10819.61
For Columns
2
-
11068.86
For Lintel Beam
2.1
-
11258.61
Sunshades 75 mm thick
9.8
-
951.42
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6132.99
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
306.75
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1217.71
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5868.04
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2871.97
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5868.04
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Chintalapadu (V) of Chandarlapadu (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1193.17
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4286.35
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8371.52
For Pedestals
3.3
-
8870.29
For GL Beam
15
-
10757.44
For Columns
2
-
11006.69
For Lintel Beam
2.1
-
11196.44
Sunshades 75 mm thick
9.8
-
947.54
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6123.63
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
305.35
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1193.17
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5804
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2839.34
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5804
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Kakarla (V) of Tiruvuru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1193.17
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4286.35
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8371.52
For Pedestals
3.3
-
8870.29
For GL Beam
15
-
10757.44
For Columns
2
-
11006.69
For Lintel Beam
2.1
-
11196.44
Sunshades 75 mm thick
9.8
-
947.54
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6123.63
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
305.35
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1193.17
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5804
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2839.34
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5804
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Mallela (V) of Tiruvuru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1266.79
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4392.69
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8477.87
For Pedestals
3.3
-
8976.64
For GL Beam
15
-
10863.78
For Columns
2
-
11113.03
For Lintel Beam
2.1
-
11302.78
Sunshades 75 mm thick
9.8
-
954.18
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6132.99
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
306.75
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1266.79
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5913.53
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
68.31
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.15
-
2937.25
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
45.54
-
5913.53
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
227.7
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
159.8
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
159.8
-
50
At Munukulla (V) of Tiruvuru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
115.2
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
6.4
-
1229.98
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
6.4
-
4342.38
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
115.2
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
453
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
21
-
8427.56
For Pedestals
5.2
-
8926.33
For GL Beam
22.5
-
10813.47
For Columns
2.5
-
11062.72
For Lintel Beam
3.2
-
11252.47
Sunshades 75 mm thick
17.5
-
951.04
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
4
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
52
-
6128.98
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
640
-
306.15
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
57
-
1229.98
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
566
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
71
-
5861.72
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
173.96
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
173.96
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
17.28
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
61.1
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
490
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
433
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
12
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
920
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
1
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
2
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
110.08
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
77.76
-
2888.29
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
103.68
-
5861.72
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
518.4
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
321.6
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
321.6
-
50
At Vamakuntla (V) of Tiruvuru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1340.41
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4493.31
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8578.49
For Pedestals
3.3
-
9077.26
For GL Beam
15
-
10964.4
For Columns
2
-
11213.65
For Lintel Beam
2.1
-
11403.4
Sunshades 75 mm thick
9.8
-
960.47
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6141
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
307.95
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1340.41
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
6017.17
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
66
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
33
-
3035.17
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
44
-
6017.17
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
220
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
157
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
157
-
50
At Mustikuntla (V) of Tiruvuru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1254.52
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4375.92
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8461.1
For Pedestals
3.3
-
8959.87
For GL Beam
15
-
10847.01
For Columns
2
-
11096.26
For Lintel Beam
2.1
-
11286.01
Sunshades 75 mm thick
9.8
-
953.13
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6131.65
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
306.55
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1254.52
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5896.26
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
67.65
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
33.82
-
2920.93
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
45.1
-
5896.26
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
225.5
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
159
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
159
-
50
At Kokilampadu (V) of Tiruvuru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1315.87
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4459.77
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8544.95
For Pedestals
3.3
-
9043.72
For GL Beam
15
-
10930.86
For Columns
2
-
11180.11
For Lintel Beam
2.1
-
11369.86
Sunshades 75 mm thick
9.8
-
958.38
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6138.33
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
307.55
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1315.87
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5982.62
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
67.65
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
33.82
-
3002.53
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
45.1
-
5982.62
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
225.5
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
159
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
159
-
50
At Anjaneyapuram (V) of Tiruvuru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1205.44
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4308.84
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8394.02
For Pedestals
3.3
-
8892.79
For GL Beam
15
-
10779.94
For Columns
2
-
11029.19
For Lintel Beam
2.1
-
11218.93
Sunshades 75 mm thick
9.8
-
948.94
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6126.31
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
305.75
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1205.44
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5827.17
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2855.66
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5827.17
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Ganugapadu (V) of Tiruvuru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1217.71
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4319.89
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8405.06
For Pedestals
3.3
-
8903.83
For GL Beam
15
-
10790.98
For Columns
2
-
11040.23
For Lintel Beam
2.1
-
11229.98
Sunshades 75 mm thick
9.8
-
949.63
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6126.31
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
305.75
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1217.71
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5838.55
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2871.97
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5838.55
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Vavilala (V) of Tiruvuru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1389.49
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4560.39
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8645.56
For Pedestals
3.3
-
9144.33
For GL Beam
15
-
11031.48
For Columns
2
-
11280.73
For Lintel Beam
2.1
-
11470.48
Sunshades 75 mm thick
9.8
-
964.66
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6146.35
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
308.76
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1389.49
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
6086.26
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
66
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
33
-
3100.45
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
44
-
6086.26
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
220
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
157
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
157
-
50
At Erramadu (V) of Tiruvuru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1279.06
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4409.46
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8494.64
For Pedestals
3.3
-
8993.41
For GL Beam
15
-
10880.55
For Columns
2
-
11129.8
For Lintel Beam
2.1
-
11319.55
Sunshades 75 mm thick
9.8
-
955.23
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6134.32
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
306.95
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1279.06
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5930.81
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
67.65
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
33.82
-
2953.57
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
45.1
-
5930.81
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
225.5
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
159
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
159
-
50
At Chikkavaram (V) of Gannavaram (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Sand from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1115
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4176.32
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
350.71
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8261.5
For Pedestals
3.3
-
8760.27
For GL Beam
15
-
10647.41
For Columns
2
-
10896.66
For Lintel Beam
2.1
-
11086.41
Sunshades 75 mm thick
9.8
-
940.65
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6090.23
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
300.34
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1229.98
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5690.67
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
67.65
-
640.46
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
33.82
-
2888.29
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
45.1
-
5690.67
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
225.5
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
159
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
159
-
50
At Tempalli (V) of Gannavaram (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Sand from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1007.97
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4128.16
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
442.74
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8213.34
For Pedestals
3.3
-
8712.11
For GL Beam
15
-
10599.25
For Columns
2
-
10848.5
For Lintel Beam
2.1
-
11038.25
Sunshades 75 mm thick
9.8
-
937.64
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6078.99
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
298.65
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1229.98
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5641.07
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
67.65
-
758.26
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
33.82
-
2888.29
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
45.1
-
5641.07
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
225.5
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
159
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
159
-
50
At Kondapavuluru (V) of Gannavaram (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Sand from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
869.93
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
3955.61
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
366.05
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8040.79
For Pedestals
3.3
-
8539.56
For GL Beam
15
-
10426.7
For Columns
2
-
10675.95
For Lintel Beam
2.1
-
10865.7
Sunshades 75 mm thick
9.8
-
926.86
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6064.5
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
296.48
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1107.27
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5463.35
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
660.09
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2725.1
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5463.35
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Pedavutapalli (V) of Unguturu (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Sand from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1089.55
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4087.57
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
412.06
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8172.74
For Pedestals
3.3
-
8671.51
For GL Beam
15
-
10558.66
For Columns
2
-
10807.91
For Lintel Beam
2.1
-
10997.66
Sunshades 75 mm thick
9.8
-
935.11
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6087.56
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
299.94
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1144.08
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5599.26
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
718.99
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2774.06
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5599.26
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Verapanenigudem (V) of Gannavaram (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Sand from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1023.31
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4157.15
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
412.06
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8242.33
For Pedestals
3.3
-
8741.1
For GL Beam
15
-
10628.24
For Columns
2
-
10877.49
For Lintel Beam
2.1
-
11067.24
Sunshades 75 mm thick
9.8
-
939.46
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6080.6
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
298.89
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1254.52
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5670.93
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
67.65
-
718.99
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
33.82
-
2920.93
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
45.1
-
5670.93
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
225.5
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
159
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
159
-
50
At Vempadu (V) of Unguturu (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Sand from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1153.17
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4193.5
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
580.78
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8278.68
For Pedestals
3.3
-
8777.45
For GL Beam
15
-
10664.59
For Columns
2
-
10913.84
For Lintel Beam
2.1
-
11103.59
Sunshades 75 mm thick
9.8
-
941.73
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6094.24
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
300.94
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1229.98
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5708.37
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
66
-
934.95
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
33
-
2888.29
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
44
-
5708.37
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
220
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
157
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
157
-
50
At Veeravalli (V) of Bapulapadu (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Sand from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1254.97
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4316.62
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
642.13
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8401.79
For Pedestals
3.3
-
8900.56
For GL Beam
15
-
10787.71
For Columns
2
-
11036.96
For Lintel Beam
2.1
-
11226.7
Sunshades 75 mm thick
9.8
-
949.42
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6104.93
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
302.54
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1315.87
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5835.18
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
63
-
1013.48
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
31.5
-
3002.53
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
42
-
5835.18
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
210
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
154
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
154
-
50
At Veleru (V) of Bapulapadu (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Sand from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1344.05
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4422.96
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
723.71
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8508.14
For Pedestals
3.3
-
9006.91
For GL Beam
15
-
10894.05
For Columns
2
-
11143.3
For Lintel Beam
2.1
-
11333.05
Sunshades 75 mm thick
9.8
-
956.07
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6114.28
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
303.95
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1389.49
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5944.71
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
61.5
-
1117.9
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
30.75
-
3100.45
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
41
-
5944.71
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
205
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
152
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
152
-
50
At Kalagara (V) of Vissannapeta (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
115.2
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
6.4
-
1266.79
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
6.4
-
4386.97
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
115.2
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
453
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
21
-
8472.14
For Pedestals
5.2
-
8970.91
For GL Beam
22.5
-
10858.06
For Columns
2.5
-
11107.31
For Lintel Beam
3.2
-
11297.05
Sunshades 75 mm thick
17.5
-
953.82
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
4
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
52
-
6131.65
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
640
-
306.55
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
57
-
1266.79
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
566
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
71
-
5907.64
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
173.96
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
173.96
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
17.28
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
61.1
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
490
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
433
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
12
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
920
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
1
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
2
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
104.64
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
78.48
-
2937.25
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
104.64
-
5907.64
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
523.2
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
322.8
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
322.8
-
50
At Kunaparajuparva (V) of Reddygudem(M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
984.57
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4121.52
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8206.69
For Pedestals
3.3
-
8705.46
For GL Beam
15
-
10592.61
For Columns
2
-
10841.86
For Lintel Beam
2.1
-
11031.6
Sunshades 75 mm thick
9.8
-
937.23
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6128.98
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
306.15
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
984.57
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5634.22
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2561.9
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5634.22
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Putrela (V) of Vissannapeta (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
115.2
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
6.4
-
1217.71
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
6.4
-
4319.89
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
115.2
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
453
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
21
-
8405.06
For Pedestals
5.2
-
8903.83
For GL Beam
22.5
-
10790.98
For Columns
2.5
-
11040.23
For Lintel Beam
3.2
-
11229.98
Sunshades 75 mm thick
17.5
-
949.63
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
4
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
52
-
6126.31
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
640
-
305.75
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
57
-
1217.71
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
566
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
71
-
5838.55
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
173.96
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
173.96
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
17.28
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
61.1
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
490
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
433
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
12
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
920
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
1
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
2
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
105.6
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
79.2
-
2871.97
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
105.6
-
5838.55
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
528
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
324
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
324
-
50
At Naguluru (V) of Reddygudem(M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
832.1
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
3927.03
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8012.21
For Pedestals
3.3
-
8510.98
For GL Beam
15
-
10398.12
For Columns
2
-
10647.37
For Lintel Beam
2.1
-
10837.12
Sunshades 75 mm thick
9.8
-
925.08
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6115.62
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
304.15
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
832.1
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5433.9
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2359.11
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5433.9
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Vissannapeta (V) of Vissannapeta (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
115.2
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
6.4
-
1107.27
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
6.4
-
4174.69
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
115.2
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
453
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
21
-
8259.86
For Pedestals
5.2
-
8758.63
For GL Beam
22.5
-
10645.78
For Columns
2.5
-
10895.03
For Lintel Beam
3.2
-
11084.78
Sunshades 75 mm thick
17.5
-
940.55
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
4
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
52
-
6115.62
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
640
-
304.15
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
57
-
1107.27
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
566
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
71
-
5688.99
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
173.96
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
173.96
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
17.28
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
61.1
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
490
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
433
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
12
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
920
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
1
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
2
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
105.6
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
79.2
-
2725.1
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
105.6
-
5688.99
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
528
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
324
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
324
-
50
At Vinagadapa (V) of Gampalagudem (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Sand from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
854.59
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4169.58
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
850.96
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8254.75
For Pedestals
3.3
-
8753.52
For GL Beam
15
-
10640.67
For Columns
2
-
10889.92
For Lintel Beam
2.1
-
11079.66
Sunshades 75 mm thick
9.8
-
940.23
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6062.89
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
296.24
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1352.68
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5683.72
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
61.5
-
1280.78
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
30.75
-
3051.49
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
41
-
5683.72
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
205
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
152
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
152
-
50
At Anumollanka (V) of Gampalagudem (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1095
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4163.64
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8248.82
For Pedestals
3.3
-
8747.59
For GL Beam
15
-
10634.74
For Columns
2
-
10883.99
For Lintel Beam
2.1
-
11073.73
Sunshades 75 mm thick
9.8
-
939.87
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6115.62
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
304.15
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1095
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5677.62
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2708.78
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5677.62
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Nemali (V) of Gampalagudem (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1389.49
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4566.11
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8651.29
For Pedestals
3.3
-
9150.06
For GL Beam
15
-
11037.21
For Columns
2
-
11286.46
For Lintel Beam
2.1
-
11476.2
Sunshades 75 mm thick
9.8
-
965.02
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6147.68
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
308.96
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1389.49
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
6092.16
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
66
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
33
-
3100.45
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
44
-
6092.16
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
220
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
157
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
157
-
50
At Chekkapalli (V) of Musunuru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1217.71
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4325.61
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8410.79
For Pedestals
3.3
-
8909.56
For GL Beam
15
-
10796.71
For Columns
2
-
11045.96
For Lintel Beam
2.1
-
11235.7
Sunshades 75 mm thick
9.8
-
949.99
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6127.64
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
305.95
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1217.71
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5844.44
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2871.97
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5844.44
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Lopudi (V) of Musunuru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1266.79
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4392.69
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8477.87
For Pedestals
3.3
-
8976.64
For GL Beam
15
-
10863.78
For Columns
2
-
11113.03
For Lintel Beam
2.1
-
11302.78
Sunshades 75 mm thick
9.8
-
954.18
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6132.99
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
306.75
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1266.79
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5913.53
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
67.65
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
33.82
-
2937.25
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
45.1
-
5913.53
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
225.5
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
159
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
159
-
50
At Balive (V) of Musunuru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1291.33
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4426.23
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8511.41
For Pedestals
3.3
-
9010.18
For GL Beam
15
-
10897.32
For Columns
2
-
11146.57
For Lintel Beam
2.1
-
11336.32
Sunshades 75 mm thick
9.8
-
956.27
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6135.66
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
307.15
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1291.33
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5948.08
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
67.65
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
33.82
-
2969.89
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
45.1
-
5948.08
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
225.5
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
159
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
159
-
50
At Chintalavalli (V) of Musunuru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1168.62
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4258.54
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8343.71
For Pedestals
3.3
-
8842.48
For GL Beam
15
-
10729.63
For Columns
2
-
10978.88
For Lintel Beam
2.1
-
11168.62
Sunshades 75 mm thick
9.8
-
945.8
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6122.3
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
305.15
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1168.62
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5775.35
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2806.7
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5775.35
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Gopavaram (V) of Musunuru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1217.71
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4325.61
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8410.79
For Pedestals
3.3
-
8909.56
For GL Beam
15
-
10796.71
For Columns
2
-
11045.96
For Lintel Beam
2.1
-
11235.7
Sunshades 75 mm thick
9.8
-
949.99
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6127.64
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
305.95
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1217.71
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5844.44
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2871.97
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5844.44
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Velpucherla (V) of Musunuru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1254.52
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4381.65
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8466.82
For Pedestals
3.3
-
8965.59
For GL Beam
15
-
10852.74
For Columns
2
-
11101.99
For Lintel Beam
2.1
-
11291.74
Sunshades 75 mm thick
9.8
-
953.49
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6132.99
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
306.75
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1254.52
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5902.16
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
67.65
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
33.82
-
2920.93
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
45.1
-
5902.16
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
225.5
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
159
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
159
-
50
At Korlagunta (V) of Musunuru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1070.46
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4141.56
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8226.73
For Pedestals
3.3
-
8725.5
For GL Beam
15
-
10612.65
For Columns
2
-
10861.9
For Lintel Beam
2.1
-
11051.65
Sunshades 75 mm thick
9.8
-
938.48
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6115.62
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
304.15
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1070.46
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5654.87
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2676.14
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5654.87
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Musunuru (V) of Musunuru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1156.35
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4241.77
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8326.94
For Pedestals
3.3
-
8825.71
For GL Beam
15
-
10712.86
For Columns
2
-
10962.11
For Lintel Beam
2.1
-
11151.85
Sunshades 75 mm thick
9.8
-
944.74
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6120.96
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
304.95
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1156.35
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5758.08
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2790.38
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5758.08
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Valasapalli (V) of Musunuru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1266.79
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4386.97
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8472.14
For Pedestals
3.3
-
8970.91
For GL Beam
15
-
10858.06
For Columns
2
-
11107.31
For Lintel Beam
2.1
-
11297.05
Sunshades 75 mm thick
9.8
-
953.82
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6131.65
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
306.55
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1266.79
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5907.64
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
67.65
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
33.82
-
2937.25
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
45.1
-
5907.64
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
225.5
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
159
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
159
-
50
At Gullapudi (V) of Musunuru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1266.79
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4386.97
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8472.14
For Pedestals
3.3
-
8970.91
For GL Beam
15
-
10858.06
For Columns
2
-
11107.31
For Lintel Beam
2.1
-
11297.05
Sunshades 75 mm thick
9.8
-
953.82
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6131.65
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
306.55
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1266.79
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5907.64
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
67.65
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
33.82
-
2937.25
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
45.1
-
5907.64
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
225.5
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
159
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
159
-
50
At Atkuru (V) of Unguturu (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Sand from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1127.72
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4159.96
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
427.4
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8245.14
For Pedestals
3.3
-
8743.91
For GL Beam
15
-
10631.05
For Columns
2
-
10880.3
For Lintel Beam
2.1
-
11070.05
Sunshades 75 mm thick
9.8
-
939.63
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6091.57
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
300.54
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1205.44
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5673.82
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
67.65
-
738.62
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
33.82
-
2855.66
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
45.1
-
5673.82
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
225.5
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
159
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
159
-
50
At Adavinekkalam (V) of Agiripalli (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
996.84
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
3937.87
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8023.04
For Pedestals
3.3
-
8521.81
For GL Beam
15
-
10408.96
For Columns
2
-
10658.21
For Lintel Beam
2.1
-
10847.96
Sunshades 75 mm thick
9.8
-
925.76
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6083.55
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
299.34
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
996.84
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5445.07
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2578.22
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5445.07
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Choparametla (V) of Agiripalli (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1021.38
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4057.3
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8142.48
For Pedestals
3.3
-
8641.25
For GL Beam
15
-
10528.39
For Columns
2
-
10777.64
For Lintel Beam
2.1
-
10967.39
Sunshades 75 mm thick
9.8
-
933.22
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6106.26
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
302.74
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1021.38
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5568.08
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2610.86
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5568.08
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Edara (V) of Agiripalli (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1033.65
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4028.26
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8113.44
For Pedestals
3.3
-
8612.21
For GL Beam
15
-
10499.35
For Columns
2
-
10748.6
For Lintel Beam
2.1
-
10938.35
Sunshades 75 mm thick
9.8
-
931.4
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6096.91
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
301.34
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1033.65
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5538.17
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2627.18
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5538.17
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Krishnavaram (V) of Agiripalli (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1144.08
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4213.54
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8298.72
For Pedestals
3.3
-
8797.49
For GL Beam
15
-
10684.64
For Columns
2
-
10933.89
For Lintel Beam
2.1
-
11123.63
Sunshades 75 mm thick
9.8
-
942.98
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6116.95
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
304.35
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1144.08
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5729.01
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2774.06
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5729.01
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Suravaram (V) of Agiripalli (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
1156.35
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
4230.31
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
8315.49
For Pedestals
3.3
-
8814.26
For GL Beam
15
-
10701.4
For Columns
2
-
10950.65
For Lintel Beam
2.1
-
11140.4
Sunshades 75 mm thick
9.8
-
944.03
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6118.29
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
304.55
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1156.35
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5746.28
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2790.38
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5746.28
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Sobhanapuram (V) of Agiripalli (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
905.95
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
3901.88
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
7987.05
For Pedestals
3.3
-
8485.82
For GL Beam
15
-
10372.97
For Columns
2
-
10622.22
For Lintel Beam
2.1
-
10811.96
Sunshades 75 mm thick
9.8
-
923.51
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6094.24
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
300.94
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
905.95
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5407.99
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2457.33
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5407.99
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Cheemalapadu (V) of A-Konduru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
3.24
-
1021.38
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
4057.3
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8142.48
For Pedestals
2.5
-
8641.25
For GL Beam
15
-
10528.39
For Columns
2
-
10777.64
For Lintel Beam
2.1
-
10967.39
Sunshades 75 mm thick
9.8
-
933.22
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6106.26
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
302.74
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1021.38
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5568.08
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
550
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
70
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2610.86
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5568.08
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Madhavaram (V) of A-Konduru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
3.24
-
1082.73
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
4101.07
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8186.24
For Pedestals
2.5
-
8685.01
For GL Beam
15
-
10572.16
For Columns
2
-
10821.41
For Lintel Beam
2.1
-
11011.15
Sunshades 75 mm thick
9.8
-
935.95
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6103.59
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
302.34
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1082.73
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5613.16
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
550
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
70
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2692.46
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5613.16
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Repudi (V) of A-Konduru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
3.24
-
1082.73
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
4141.15
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8226.32
For Pedestals
2.5
-
8725.09
For GL Beam
15
-
10612.24
For Columns
2
-
10861.49
For Lintel Beam
2.1
-
11051.24
Sunshades 75 mm thick
9.8
-
938.46
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6112.94
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
303.75
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1082.73
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5654.44
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
550
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
70
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2692.46
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5654.44
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Khambhampadu-1 (V) of A-Konduru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
3.24
-
1082.73
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
4123.97
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8209.15
For Pedestals
2.5
-
8707.92
For GL Beam
15
-
10595.06
For Columns
2
-
10844.31
For Lintel Beam
2.1
-
11034.06
Sunshades 75 mm thick
9.8
-
937.38
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6108.94
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
303.14
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1082.73
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5636.75
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
550
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
70
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2692.46
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5636.75
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Koduru (V) of A-Konduru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
3.24
-
1082.73
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
4118.24
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8203.42
For Pedestals
2.5
-
8702.19
For GL Beam
15
-
10589.33
For Columns
2
-
10838.58
For Lintel Beam
2.1
-
11028.33
Sunshades 75 mm thick
9.8
-
937.03
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6107.6
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
302.94
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1082.73
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5630.85
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
550
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
70
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2692.46
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5630.85
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Polisettipadu (V) of A-Konduru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
3.24
-
1193.17
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
4286.35
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8371.52
For Pedestals
2.5
-
8870.29
For GL Beam
15
-
10757.44
For Columns
2
-
11006.69
For Lintel Beam
2.1
-
11196.44
Sunshades 75 mm thick
9.8
-
947.54
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6123.63
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
305.35
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1193.17
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5804
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
550
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
70
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2839.34
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5804
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Vallampatla (V) of A-Konduru (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
48.6
-
202.64
Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
3.24
-
1131.81
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
3.24
-
4208.23
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
289.36
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
8
-
8293.4
For Pedestals
2.5
-
8792.17
For GL Beam
15
-
10679.32
For Columns
2
-
10928.57
For Lintel Beam
2.1
-
11118.32
Sunshades 75 mm thick
9.8
-
942.65
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.1
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6118.29
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
304.55
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1131.81
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5723.54
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
550
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
70
-
561.93
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2757.74
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5723.54
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
At Mustabada (V) of Gannavaram (M)
-
-
-
A) Civil Work
-
-
-
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
72
-
202.64
Filling of foundations with Sand from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete inlcuding watering and ramming as per standard specification referred and direction of the departmental officers.
4
-
839.26
P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
4
-
3864.5
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
48
-
40.76
Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers on prepared surface, and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and watering and ramming and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
227
-
519.43
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
For Footings
13
-
7949.68
For Pedestals
3.3
-
8448.45
For GL Beam
15
-
10335.59
For Columns
2
-
10584.84
For Lintel Beam
2.1
-
10774.59
Sunshades 75 mm thick
9.8
-
921.17
Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work
2.15
-
75478.99
Brick masonary in C.M. (1:6) prop. using cement Solid fly ash bricks of size 290mm x 200mm x 140mm including cost and conveyance of all materials of crushing strengh 50 Kg/cm2 to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers
31.5
-
6061.28
Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.
410
-
296
Filling with 2.36mm HGB Chips and below filing in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and remming including loading, unloading, including Cost and Conveyance of all materials and labour charges etc., complete.
29
-
1021.38
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
285
-
17.33
VCC M20 Nominal mix using 40mm metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, curing etc., complete for finished item of work as per standard specifications.
35.5
-
5369.5
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
86.98
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
86.98
-
50
Supply and fixing of Rolling Shutters made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed at the ends by the end-locks, mounted ion specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work.
8.64
-
3976.53
Supply and Fixing of M.S door of size 0.90 x 1.98 mtrs with two leafs using outer frame L angle of size 50x50x5mm and shutter frame made of 40 x 40 x 3 mm thick with horizontal and verticle MS flats supports for the 14 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.
4
-
7000
Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers
39.5
-
101.79
White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.
385
-
35.97
Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.
300
-
53.96
Supply and Fixing of cement bonded particle board of 10 mm thick of ISI make including cost and conveyances of all materials,labour charges for cutting and fixing in position including all incidental and operational charges etc., complete for finished item of work.
63.45
-
658.4
B) Pre Fabrication structure
-
-
-
Supply & Installation of Primary (Built-up) sections including applicable taxes are fabricated from hot rolled steel plates conforning to ASTM A 572M Grade 345 (or Equivalent) type 2 with mnininum yield strength of 345 MPa Flanges are welded to the web by a continuos single side fillet weld deposited by an automatic submerged arc welding prooces. The Built up frame sall be Sweep blasted with one coat of primer paint applied at facory and finished cost 2@30 Microns at site
6
-
120205
Supply of secondry memberss are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site minimum yield strenght of 345 MPa
2.5
-
147415
Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: RegularModifiedPolyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length with Regular Range Colours including sheet fixing charges ,cost of screws Hilt/corroshiled self drilling screws with neoprene washer.Side laps are stiched with self tapping/drilling screws .End laps are to be sealed with 25x3 MM Butly tape .The sheets are provided with anti capilary grove.chssing machinary shuld be done all one side including filling after insertion of sheet in the groove as directed by the offier in charge of work
490
-
863.47
Supply and erection of connection bolts and nuts rolled sections including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.
0.5
-
115890
Supply of fixing Turbo Ventilators of 24" Size made of stainless steel of standered make as directed by the engineer in charge of the work
1
-
12000
C) Drying Platform
-
-
-
Granular sub base / base / surfae course with local materials(Table 400.13) by mix place method normal construction of granular sub -bae by providing local material spreading in uniform layers prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density with watering complete as per clause 401.4 as per Technical Specification Clause 408 MORD
69.3
-
856.42
Providing,Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem Specification including cost of all materials and inlcuding premixing the material with water at OMC in Machanical Mix plant carriage of mixed material by tipper to site, laying in uniformlayers in uniform lyers in sub-base/base course on prepared sub-base and compacted with vibrating roller of 80-100 KN weight to achieve the density including lighting with paver in base courses on well prepared surface and in-Charge and as per MoRTH specification. 406 (4th revision) for finished item of work.
34.65
-
2610.86
VCC M20 Nominal mix using 40mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges,curing etc., complete for finished item of work as per standard specifications.
46.2
-
5369.5
Providing PVC sheet of 125 micron microns to separate the wetmix and VCC concrete to obtain required strength including cost and conveyance of all materials and all labour chrges etc., complete.
231
-
17.33
Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge
161
-
58
Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications
161
-
50
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements