Agricultural Marketing Department Tender

Quarry Center;Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD/304 MORTH - Sand filling

Quarry Center;Drilling of Bore well 112 mm dia. up to 150.00 m depth with DTH Rig - Drilling of Bore well by down the hole hammer drilling to a finished dia of 112 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc. and drilling in over burden to dia not less than 200 mm etc and reaming the bore well to suit insertion of suitable casing pipe etc., including insertion of casing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development (Flushing of Bore Well at an average pressure of 150 PSI) conducting yield test, consumables charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges and all taxes, but excluding the cost of casing pipe, couplings, cap etc., The entire work should be carried out as per IS -2800 Part I II 1979 and amended from time to time.

Quarry Center;Manufacture, Supply and Delivery of 110 dia Un-plasticised PVCs Pipes 10 Kgs/cm2for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes.

Quarry Center;Slotting Charges for 110mm dia PVC pipe including cost and conveyance of all materials and labour charges etc., complete.

Quarry Center;supply and fixing of 40mm dia HDPE pipe 10kg/Sq.cm including cost and conveyance of all materials and labour chargers for finished item of work.

Quarry Center;VRCC M20 Nominal Mix (Cement:Fine aggregate: Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine cru shed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as machine mixing, laying concrete, curing etc., but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work or as directed by Engineer-in- Charge, but including Centering Scaffolding, Shuttering for PLINTH BEAMS

Quarry Center;Brick Masonry in CM (1:6) with Bricks with traditional size 23 x 11 x 7 cms 2nd class: Brick Masonry 230 mm thick with Cement Mortar (1:6) prop. (Cement:Sand) using Common Burnt Clay Bricks Non-Modular of traditional size 23 x 11 x 7 cm 2nd Class from approved source having minimum crushing strength of not less than 3.5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., but excluding seigniorage charges, complete as per drawing and Technical specifications cluase APSS 504 for finished item of work or as directed by Engineer-in Charge for panel walls in Super-Structure, parapet walls.

Quarry Center;Plain Cement concrete (M 20) Nominal Mix using 20mm metal using concrete mixer: PCC M20 Nominal Mix (Cement:Fine aggregate: Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials for finished item of work, but excluding Centering Scaffolding, Shuttering

Quarry Center;Plastering 12 mm thick in single coat in CM (1:5) including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting Grooves etc., but excluding seigniorage charges, sales other taxes on all materials, complete as per the drawing, technical specification clauses APSS 901, 903 904 for finished item of work or as directed by the Engineer-in-Charge for Brick Wall and RCC exposed faces.

Quarry Center;ELEC-3.8.16. Supply and fixing of 20W, T8,1200mm length LED retrofit tube light, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete as per IS 10322 (Part 5/ Sec 1)..2012 Makes: Wipro / Phillips / GE-Venture / Crompton / Bajaj /Halonix/Jaquar/HPL b) LED MAKE : PHILIPS LUMILEDS / C REE / NICHIA / OSRAM / SAMSUNG.

Quarry Center;ELEC-1.5.4.d Supply of ?3 core 1.5 Sqmm..PVC insulated and sheathed FRLS copper round cable for voltage up to 1100V as per IS 694/1990. Makes: Finolex / RR Kable / Havells/KEI/ Polycab/ Orbit/Gloster

Quarry Center;ELEC-5.4.1.b Supply and Transportation of ???..,5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 240V ± 10% , SinglePhase 50 Hz AC supply,etc complete for 4" Bore well. 1.00HP 10 Stage Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/Aryen Varsha

Quarry Center;ELEC-5.4.15. Fabrication , transportation and supply of suitable size panel board for single phase submersible motor up to 1.5 HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch including supply and fixing of DOL starter of make CS/LTLK/Seimens/BCH/Crompton. complete.,

Quarry Center;Supply, Transportation and fixing of 20W LED Street light Luminaire made of pressure diecast aluminium body with powder coated, havi ng protective toughened glass, Supply Input voltage 120 -270 V AC, P.F > 0.90, high power LED's System efficiency >95 lm/W and junct ion temperature < 70°C, with Ingress protection IP65, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge prot ection 4KV, external Surge protection = 5KV with optics distribution , THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., all standard accessories including 1.0 Mtr 25mm dia 'B' Class GI pipe bracket, anti tilting MS flat in cluding connections etc., complete. .a) Luminaire Make : WIPRO / PHILIPS (GREEN LINE )/ Lighting Technologies(Adornis) / SCHREDER (B RIKLA) /GE / VIN (MATRIX) / CROMPTON (HAWK) /BAJAJ (EDGE+) / HALONIX (LUMOS-SUPER) /HAVELLS (ENDURA CITYLINER )b) LED MAKE :PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG