Agricultural Marketing Department Tender

Bailing out water for earth work excavation /concrete for foundation below water level. (For building items only) - Other than sandy soil - 1.0 M to 2.0 M

Filling of sand in layers of 15cms. Thick, watering, tamping, including cost and conveyance of all materials to site from approved source, labour charges of all items of work and all incidental and operational charges etc., complete as per standard specification referred and direction of the departmental officers.

P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work

Beam balfil wall

Roof slab 150mm thick

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Brick Masonry in C.M. (1:6) prop. Using 2nd class well burnt bricks from approved quarry free from warping, distortion cracks, chips, flows stones and nodules free from lime in accordance with IS-3495-1966 and screened sand including cost and conveyance of all materials to site, scaffolding charges of all materials, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers.

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., but excluding seigniorage charges complete for finished item of work or as directed by Engineer-in-Charge. (APSS No. 901 903).

Supply and fixing of 110mm PVC pipe 4Kg/cm2 including cost and conveyance of all materials and labour charges etc., complete work.

Supply and fixing of hume pipe including cost and conveyance of all materials and labour charges etc., complete work.

Supplying & Fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 300 grams Seiko/ Esso or equivalent complete with standard CI brackets including wooden block ( 630 x 450 mm - Single C.P. Pillar cock )

Supply, installation and commissioning approved make floor mounted EWC (Suit) CASCADE model ‘P’ or ‘S’ trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap 15mm angle stop cock 450mm long PVC inter connection pipe wall flanged all of approved make etc., complete for finished item of work in all respects

Supply and erecting fresh air exhaust fan of Heavy duty 250V. AC 50 cycles, 300 mm size (12") 900 RPM with condensor and wothout regulator complete errected in postion with necessary materials. Fan motor with moisture proof treetment and "E' class insulation and painted with lettering by enamel paint the Sr. No. and date of errection including cost and conveyance of all materials and laboiur charges etc., complete Specification Item No. 9.7.18

Supplying & Fixing low down porcelain flushing tank 10 Lit Capacity with internal components including cost and conveyance of all materialsand labour charges etc., complete.

Supplying & Fixing Indian pattern white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with"P" or "S" trap: 580 mm Long

Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming to IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make : 410 x 265 x 305 mm

Supply of soluble salt porcelain vitrified tiles screen printed and polished of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all sahdes and designs, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work

Painting to Old Iron work 2 coats with synthetic enamel paint of first grade approved brand and colour of ISI make over a primary coat including cost and conveyance of all materials including all labour charges for preparing the surface for painting all taxes etc., complete for finished item of work.

Supply and fixing of Toilet Door of size 0.94 x 2.00 mts with WPC frame 63.50 x 100 mm size - H ( 1 x 0.94mts) + V( 2 x 2.00 Mts) and 25mm thick WPC shutter of size 0.80 x 1.90 mts - 1 No and 100mm Alu Hinges - 3 Nos,150mm Alu Handle - 1 No, 100mm Alu Tower Bolts - 1 No, 200mm Long Alu Aldrop - 1 Nos, Z hold fast - 6 Nos including cost and conveyance of all materials and all labour charges wrought and putup etc., complete

PCC M20 using 20 mm metal with concrete mixture and sand including cost and conveyance of all materials to site from approved source, Centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work