Acharya NG Ranga Agricultural University Tender

Brick Masonry work in CM (1:6) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., cpomplete with a compresive streangth not lessthan 50 kg/sqm for walls for Superstructure -BLD-CSTN-6-18

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work For Foundations/Footings

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work for Columns upto basement

Providing High Yeild Strength Deformed (HYSD)/Mild Steel (MS) steel bars (Fe 415/Fe 500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placeing in position with cover blocks of aapproved materials and size and tying and lap-splicing with binding wire 18 SWG, forming frills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidential, operational, labour charges such as cutting, bending, placing in position tying including sales and other taxes on all materials etc, complete for finished item of work in all floors (APSS No 126) and as per AP Revised Std Data Index Code No ; BLD-CSTN-2-18

Gronolithie Concrete Flooring 20mm thick with (1:1:2), using 6mm to 12mm size hard granite machine crushed metal laid over CC bed already laid or RCC roof slab, in alternate panels of size not exceeding 1.50m x 1.50m and finishing the top surface to required smooth ness and slopes and threadlining including cost of all materials like cement, metal, sand and water etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of allmaterials BLD-CSTN-7-13

Plastering with CM in two coats in 20 mm thick, base coat (1:6) 16mm thick and top coat (1:4) 4mm thick with Dubara sponge finish including cost and conveyance of all materials such as cement, sand, seigniorage charges, all operational, incidental and labour charges such as mixing mortar, application, curing, etc. complete for finished item of work .As per AP Revised Std Data Index Code, BLD-CSTN-6.9 (Out side)

Refilling the foundations with the excavated earth including cost conveyance of all materials, taxes,including cost of watering, ramming,consolidation,labour charges etc. complete.

Supplying, fabrication, fixing of MS Guard bars and approved design with M.S. Flats/Square bars i/c cost, conveyance of all materials, taxes, labour charges etc, complete

Roofing: - Roofing will be provided with 0.5mm thick galvanized / pre painted G.I. profiled sheets fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti capillary grove.,i/c cost, conveyance of all meterials,taxes, labour charges etc., compete.

Painting, Priming One Coat of Red Oxide and Painting with Synthetic Enamel paints-Two Coats - For New Iron Work including cost, conveyance of all meterials,taxes, labour charges etc., compete.