Acharya NG Ranga Agricultural University Tender

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work for Columns upto basement

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work For Plinth Beam

Supply and Spreading Quarry Dust from approved quarry including cost and Conveyance all materials to work site and spreading in uniform layers including Taxes, Sienorage, Labour charges etc., complete for finished item of work as per MoRT&H specification 401 (4th Revision) and as directed by the Engineer -In-Charge

Providing Antitermite treatment as per IS 6315 (Part - 2) 2001 (Pre-constructional chemical treatment measures) along the internal & external vertical faces of the columns, plinth beams, basement and top surface of the basement filling below flooring bed as per the specified procedure conforming to IS 6315 (Part-2) 2001 and other relevant approved specification duly using Chlorpyriphos/ Lindane emulsifiable concentrate 20% with 1% concentration @ 7.5 Liters/ sqm of the vertical surface & @ 5.0 Liters/ sqm of the horizontal surface of the substructure to a depth of 500 mm around columns & 300 mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc & cost & conveyance of all materials to the site, cost of labour for spraying, rodding etc complete for finished item of work as per the approval of the Engineer-in-Charge

RCC M-20 Grade Nominal Mix corresponding to Table 9 of IS: 456 using 20mm & 10mm size HBG machine crushed HBG metal (coarse aggregates) including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregates, water, etc. to site including seigniorage charges, all operational, incidental, centering, shuttering and labour charges such as machine mixing, laying concrete, vibrating, curing, etc. complete but excluding cost of steel and its fabrication charges for finished item of work for Columns uto slab bottom

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work for RCC Slab Beams

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering (As per AP Revised Std Data Index code BLD-CSTN-2.13) For RCC Slab upto 150mm thick

RCC M-20 Grade Nominal Mix corresponding to Table 9 of IS: 456 using 20mm & 10mm size HBG machine crushed HBG metal (coarse aggregates) including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregates, water, etc. to site including seigniorage charges, all operational, incidental, centering, shuttering and labour charges such as machine mixing, laying concrete, vibrating, curing, etc. complete but excluding cost of steel and its fabrication charges for finished item of work for Lintels

RCC M-20 Grade Nominal Mix corresponding to Table 9 of IS: 456 using 20mm & 10mm size HBG machine crushed HBG metal (coarse aggregates) including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregates, water, etc. to site including seigniorage charges, all operational, incidental, centering, shuttering and labour charges such as machine mixing, laying concrete, vibrating, curing, etc. complete but excluding cost of steel and its fabrication charges for finished item of work for Sunshades

Providing High Yeild Strength Deformed (HYSD)/Mild Steel (MS) steel bars (Fe 415/Fe 500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placeing in position with cover blocks of aapproved materials and size and tying and lap-splicing with binding wire 18 SWG, forming frills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidential, operational, labour charges such as cutting, bending, placing in position tying including sales and other taxes on all materials etc, complete

Brick Masonry work in CM (1:6) prop with Common burnt clay bricks of class as per Table-1 of IS:1077-1992 Non- Modular of traditional size 23 x 11 x 7 cm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., cpomplete with a compresive streangth not lessthan 50 kg/sqm for walls for Superstructure -BLD-CSTN-6-18

Plastering with CM in two coats in 20 mm thick, base coat (1:6) 16mm thick and top coat (1:4) 4mm thick with Dubara sponge finish including cost and conveyance of all materials such as cement, sand, seigniorage charges, all operational, incidental and labour charges such as mixing mortar, application, curing, etc. complete for finished item of work .As per AP Revised Std Data Index Code, BLD-CSTN-6.9 (Out side)

Plastering with CM in 2 coats, 12mm thick, base coat in CM (1:5), 8mm thick and top coat in CM(1:3), 4mm thick with sponze finish including cost and conveyance of all materials such as cement, sand, seigniorage charges, all operational, incidental and labour charges such as mixing mortar, application, curing, etc. complete for finished item of work .As per AP Revised Std Data Index Code, BLD-CSTN-6.10 (Inside)

Plastering with CM (1:3), 12mm thick including cost and conveyance of all materials such as cement, sand, seigniorage charges, all operational, incidental and labour charges such as mixing mortar, application, curing, etc. complete for finished item of work(As per AP Revised Std Data Item Code Ser No : BLD-CSTN-6.1

Painting two coats with plastic emulsion of first quality of approved brand and colour over a primary coat (Three coats in total) including cost and conveyance of all materials to work site and all operational, incidental charges, labour charges, etc. complete for finished item of work as directed by the Engineer-in-charge for external walls as per BLD-CSTN-10-5 and Std data revised in SOR 2010-11 for Internal walls

Painting two coats with plastic emulsion of first quality of approved brand and colour over a primary coat (Three coats in total) including cost and conveyance of all materials to work site and all operational, incidental charges, labour charges, etc. complete for finished item of work as directed by the Engineer-in-charge for external walls as per BLD-CSTN-10-5 and Std data revised in SOR 2010-11 for External walls

Provoding impervious coat to exposed RCC roof slab surfaces with CM(1:3), 20mm thick with 1Kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seignorage charges, excluding conveyances of materials and including all operational, incidential and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,. complete for finished item work as per Revided std data of BLD-CSTN-8-25

Supply and fixing Powder Coated Aluminium Two/Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections(1.5mm thick +/-0.2mm) of outer frame top horizontals & both verticals of 20694 of size 62 x 29.5 mm and bottom horizontal - two track frame of 20703 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of20529/20530 of size 50 x 20 with Stainless steel Plain clear float glass 5 mm thick including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work as per AP Revised Std Data Index No : BLD-CSTN-11-30

Providing aluminimum door including cost and conveyance of all materials labour charges for manufacturing fixing in position using wooden blocks and sheet metal screw etc. to complete for finished item of work as approved by Engineer-in-charge