Public Works Department Tender
To inquire about any e-tender the Andaman & Nicobar Islands government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder one can find every eprocurement Punjab tender on BidAssist. BidAassist has collated each and every Eproc Andaman & Nicobar Island Tender on its website. Looking for Andaman & Nicobar Island tenders online or going through the cumbersome government websites for it, has been made easier with the help of BidAssist.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date17 Dec 2024
Closing Date31 Dec 2024
Tender Amount₹ 92,11,787
Costs
EMD
₹ 1,84,236Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Extension Of Apwd Division Office Building Under Maintenance Section, Sd-i, Cd, Apwd, Diglipur
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_APWD_16869_1Tender No
NIT No. 114/EE/CD/APWD/DP/2024-25Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://apwd.and.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
19.29
9635
185873.62
... More
1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
39.75
12365
491546.51
... More
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources)
13.81
598
8265.98
... More
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil.
12.81
208
2673.45
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
-
-
-
... More
1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)
28.77
14137
406730.12
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fllets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement:
-
-
-
... More
1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
12.59
15787
198762.11
... More
Reinforced cement concrete work in beams, suspended foors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).
38.55
16439
633736.94
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500D or more.
11106.41
122
1360535.23
... More
Centering and shuttering including strutting, propping etc. and removal of form for
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete.
107.4
410
44034
... More
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
62.15
830
51637.33
... More
Suspended floors, roofs, landings, balconies and access platform
85.27
893
76154.64
... More
Shelves (Cast in situ)
53.76
893
48013.06
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers
275.56
712
196212.5
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
143.04
951
136066.8
... More
Weather shade, Chajjas, corbels etc., including edges
22.13
1007
22288.23
... More
Providing and laying Autoclaved Aerated concrete blocks (AAC) masonry 150mm/230mm/300 mm thick AAC with Grade-1 blocks of density 551-650 kg/cum conforming to IS:2185 (Part 3) in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).
29.43
14797
435496.31
... More
Providing and laying Autoclaved Aerated Concrete (AAC) blocks masonry 100 mm / 125mm thick with Grade 1 AAC blocks of density 551 to 650 kg/cum conforming to IS: 2185 (Part 3) in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand)
5.91
16007
94604.62
... More
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
639.99
125
80382.74
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
-
-
-
... More
Electric resistance or induction butt welded tubes
1121.96
203
228543.25
... More
Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
27.2
121
3296.64
... More
Providing and fixing bolts including nuts and washers complete.
40
184
7362
... More
Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete.
6
245
1471.5
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.
-
-
-
... More
80x1.20 mm M.S. laths with 1.20 mm thick top cover
9.86
3897
38433.29
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
351.59
950
334168.72
... More
52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
17.1
1220
20874.83
... More
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.
-
-
-
... More
18 mm thick
1.31
795
1042.04
... More
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.
-
-
-
... More
Glazed vitrified floor tiles polished finish of size
Size of Tile 600 x 1200 mm
128.21
1847
236925.67
... More
Glazed Vitrified tiles Matt/Antiskid finish of size
Size of Tile 600 x 600 mm
48.91
1535
75115.98
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).
-
-
-
... More
Size of Tile 600x600 mm
29.73
2644
78629.9
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory Yvindows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
-
-
-
... More
Frame size 45 x 85 mm
5
874
4373
... More
Frame size 50 x 100 mm
36.9
895
33038.42
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/ mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)
-
-
-
... More
35 mm thick
14.78
4488
66343.73
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/ mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately)
-
-
-
... More
25 mm thick
1.56
3667
5720.99
... More
Providing and fixing factory made uPVC glazed/ wire mesh windows/ doors comprising of lead free uPVC multi- chambered frame, sash and mullion/ coupler (wherever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (whereever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia. with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/ mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh/ Glazing of plain/ toughened/ laminated/ double glass unit with/ without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (iii) Sites with basic wind speed 45 m/sec as per IS 875 - Part 3 (iv) Sites with structure height more than 20m for all wind speeds.
-
-
-
... More
Two track two panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body.
Using R3 series with frame (55mm & above) x (40mm & above) & sash (30mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle on every panel along with multi-point locking system (Height upto 1.8m).
11.34
11158
126534.56
... More
Three track three panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body.
Using R3 series with frame (98mm & above) x (40mm & above) & sash (30mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle on two end panels along with multi-point locking system (Height upto 1.8 meter).
17.1
11027
188563.41
... More
Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured)
-
-
-
... More
5.0 mm thick (weight not less than 12.50 kg per sqm) instead of 4 mm thick. (weight not less than 10 kg per sqm)
4.5
327
1472.4
... More
Providing and fixing glass panes with silicon sealent in UPVC doors, window with 5 mm thick glass panes
25.5
1938
49419
... More
12 mm cement plaster of mix :
-
-
-
... More
1:4 (1 cement: 4 fine sand)
858.96
568
488061.07
... More
6 mm cement plaster of mix :
-
-
-
... More
1:3 (1 cement : 3 fine sand)
84.12
415
34930.83
... More
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
665.27
311
207098.55
... More
Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in- charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately).
315.09
1015
319942.39
... More
Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately).
-
-
-
... More
6 mm thick Cement fiber board, Type-B, Category-III as per IS: 14862:2000
80.52
936
75443.21
... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete:
-
-
-
... More
New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 pram/litre
80.52
181
14630.48
... More
Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives.
-
-
-
... More
New work (Two or more coats applied @ 1.43 litre) 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
476.06
174
82858.24
... More
Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :
-
-
-
... More
Two or more coats on new work
55
139
7661.5
... More
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.
-
-
-
... More
Two coats
382.9
139
53357.12
... More
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).
63.99
985
63081.34
... More
Extra for addition of synthetic Polyester triangular fibre of length 6 mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement plaster/mortar by using 125 gms. of synthetic Polyester triangular fibre for 50 Kgs. cement used in cement mortar as per directions of Engineer-in-Charge.
104.42
88
9282.94
... More
Providing and fixing pre-painted galvalume (PPGL) steel profile sheets AZ-150 of brand Tata Bluescope steel, Everest Industries Ltd., JSW Steel Ltd., Jindal India Ltd. or equivalent (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with aluminium zinc coating 150 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping aluminium screws (Xylan) of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
182.55
956
174663.84
... More
Providing and fixing pre-painted galvalume (PPGL) steel profile sheets AZ-150 of brand Tata Bluescope steel, Everest Industries Ltd., JSW Steel Ltd., Jindal India Ltd. or equalavent (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with aluminium zinc coating 150 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns usning self drilling/self tapping screws complete.
-
-
-
... More
Ridges plain (500 - 600mm)
18.8
1018
19146.86
... More
Providing and fixing in position eaves or facia board with 18mm thick 30cm wide WPC solid board including fixing with nuts & bolts etc. all complete as per the direction of Engineer-in-charge.
56
737
41297.2
... More
Providing and fixing PVC septic tank of approved design and make of required size, having 2 Nos manhole, [thickness of tank for 1000mm diameter, 2000mm length with 20-25 user and having 2/3 chambers and air vent 50/75mm incluing earth work, CC 1:4:8 and laying tank in position, refilling of earth and filling inside half tank of water i/c transportation upto work site etc all complete as per the direction of Engineer-in-cahrge.
1
78633
78633.45
... More
Constructing solid blocks masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg):
With Soild block of size 400x100x200mm
3
19808
59425.95
... More
Providing and fixing PVC gully or nahani trap in floor with PVC grating of size:
-
-
-
... More
75 mm PVC grating
3
117
351.9
... More
Providing and fixing100 mm dia stainless grating of approved quality
3
364
1092
... More
Making soak pit filled with honey comb shaft with boulder and SW drain pipe 100mm diameter, 1.8 m long i/c earth work and CC 1:2:4 complete as per standard design.
-
-
-
... More
of size 1.50x1.50x1.50 mtr
1
15055
15055.65
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of Stone Aggregate 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
42.93
1115
47888.42
... More
Providing cement concrete surface drain including earthwork excavation 10 cm thick base concrete and 15 cm thick side wall with 1:3:6 ( 1 cement : 3 Coarse sand: 6 graded stone aggregate of 40 mm nominal size) cement concrete finished with 1:4 (1 cement : 4 sand) a floating coat of neat cement inside the drain and its top and exposed surface including earthwork in excavation and disposed of surplus earth etc.
-
-
-
... More
23 X 23cm surface drain.
56.3
2036
114635.25
... More
Extra for providing and fixing wind ties of 40x 6mm flat aluminium section.
67.6
350
23697.18
... More
Providing and fixing floor mounted, white vitreous china single piece,double traps syphonic water closet of approved brand/make, shape,size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.
1
24269
24269.5
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
-
-
-
... More
White Vitreous China Wash basin with pedestal type of size 550x400 mm with single 15 mm C.P. brass pillar taps ( Jaquar)
2
10430
20860.2
... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
-
-
-
... More
Twin rubber stopper
6
182
1094.1
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard boardground fixed to wooden cleats with C.P. brass screws and washers complete.
2
2666
5333.4
... More
Providing and fixing Health Faucewith 01 mtr long flexible tube in crome finish and fixing on wall hook etc. all complete as per the direction of Engineer-in-charge.
-
-
-
... More
15 mm nominal dia
1
3218
3218.2
... More
Providing and fixing 600x120x5 mm glass shelf with edges round off,supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawlplugs etc., complete.
2
1318
2636
... More
Providing and fixing C.P.Towel ring ( heavy Duty) of superior quality
1
871
871.3
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
-
-
-
... More
15mm nominal bore
1
825
825.45
... More
Providing and fixing C.P. angular stop cock with flange ( Jaquar or equalivalent ) of approved quality
-
-
-
... More
15 mm nominal bore two way
3
1114
3344.85
... More
Providing and fixing600mm towel rail complete with brackets fixed towooden cleats with CP brass screws with concealed fittingsarrangement of approved quality. ( make jacquard or equivalent)
1
3592
3592.3
... More
Providing and fixing 4 mm dia. G.I. wire for adjusting hangers (upto 3000mm length), fixed to roof roof truss frames by tieing at both ends, complete as per direction of Engineer-in-charge.
55
88
4875.75
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
... More
150x10 mm
2
133
266
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
... More
A150
2
591
1183.3
... More
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
7
881
6169.45
... More
Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets :
-
-
-
... More
20 mm dia (heavy type)
28.5
153
4380.45
... More
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
5
1487
7438
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
1000
22
22700
... More
Providing and fixing soil, waste and vent pipes: with UPVC pipe coforming to IS:13592 type B including jointing of pipes and fitting with solvent cement etc complete as per direction of Engineer-in-charge.
-
-
-
... More
110mm dia
30
753
22590
... More
75mm dia
12
682
8186.4
... More
Providing and fixing uPVC plain bend of required degree conforming to IS:13592: 2000.
-
-
-
... More
110 mm UPVC Plain bend
2
435
871.2
... More
75mm UPVC plain bend
4
263
1055.2
... More
Providing and fixing UPVC moulded door bend of required degree for UPVC soil pipes conforming to IS:13592 type "B" including jointing with seal ring conforming to IS: 5382 living 10mm gap for thermal expansion etc.
-
-
-
... More
110mm UPVC moulded door bend
1
501
501.05
... More
75mm UPVC moulded door bend
2
223
447.4
... More
Providing and fixing single equal plain junction of required degree
-
-
-
... More
UPVC upvc 75 x75x75 mm
1
176
176.7
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
-
-
-
... More
Semi rigid pipe
32 mm dia
2
108
217.1
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work
-
-
-
... More
50 mm nominal dia Pipes
25
1128
28200
... More
40 mm nominal dia Pipes
12
758
9097.2
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
-
-
-
... More
20 mm nominal dia Pipes
6
632
3793.8
... More
Providing and fixing CPVC Union including cutting and fixing with solvent etc. complete (New work) :
-
-
-
... More
50 mm nominal dia
2
681
1363.6
... More
40mm nominal bore
2
619
1238.4
... More
Providing and fixing ball valve (CPVC) approved quality , high or low pressure with plastic float complete
-
-
-
... More
50 mm nominal bore
2
1606
3213.1
... More
40 mm nominal bore
2
1509
3019.6
... More
Providing and fixing CPVC tank nipple.
-
-
-
... More
20 mm nominal bore
1
482
482.65
... More
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured.
3
723
2170.95
... More
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).
-
-
-
... More
Ordinary cement without any pigment
74
1897
140429.8
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
-
-
-
... More
Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
1
2312
2312.65
... More
Filling available excavated earth (excluding rock) in trenches, plinth. sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and for all lift
111.91
186
20899.19
... More
Providing and fixing uPVC Gutter ( 160 mm X 160 mm) including all necessary accessories as per the direction of the Engineer-in-charge all complete.
36.8
1788
65809.44
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
... More
110 mm diameter
30
510
15301.5
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
-
-
-
... More
Coupler
110 mm
4
217
871.8
... More
Bend 87.5°
110 mm bend
8
250
2005.2
... More
Providing and fixing stainless tower bolts of approved quality & make with necessary screws etc. complete a) 150 x10
14
203
2853.9
... More
Extra for providing and mixing hardening compound of approved quality as per manufacturer's specification in cement concrete.
214.64
59
12824.74
... More
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.
-
-
-
... More
G.I. pipes
243.75
212
51809.06
... More
Providing and fixing M.S. Fan clamp of 12 mm dia M.S bar , bent to shape with hooks ends including painting the exposed portion of loop as per stadard design complete
8
178
1429.2
... More
IEI
-
-
-
... More
Wiring for light point / Fan point / Exhaust Fan point / Call Bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular switch, modular plate, suitable size G.I. box and earthing the point with 1.5 sqmm.FRLS PVC insulated copper conducotor single core cable etc. as required .
-
-
-
... More
Group-C
60
1493
89580
... More
Wiring for Light/ power plug wiring with 2 x 4 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit alongwith 1 No. 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
120
339
40680
... More
Wiring for Circuit/ sub main Wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed PVC conduit as required.
-
-
-
... More
2x1.5 sq.mm + 1x1.5 sq.mm. earth wire
40
233
9320
... More
4x10 sq.mm + 2x6 sq.mm earth wire
30
452
13560
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
20 mm
15
124
1860
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
... More
5/6 A switch
28
116
3248
... More
3 pin 5/6 A socket outlet
28
170
4760
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but ecluding modular plate etc. as required.
14
516
7224
... More
Supplying and Fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required
12
51
612
... More
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.
-
-
-
... More
6 Module (200 mmX75 mm)
8
469
3752
... More
12 Module (200 mmx150mm)
4
600
2400
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
3
696
2088
... More
Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box / wooden block including connection etc as required.
31
94
2914
... More
Installation, testing and commissioning of wall barcket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.
29
134
3886
... More
Supplying and fixing call bell/buzzer suitable for single phase, 230 V, complete as required.
1
131
131
... More
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
14
472
6608
... More
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
14
243
3402
... More
Installation of exhaust fan in the existing opening, including making good the damage, connections, testing, commissioning etc. as required.
-
-
-
... More
Upto 450 mm
1
496
496
... More
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
1
226
226
... More
Supplying and Fixing of PVC Button / Angle Holder including connection etc as required.
1
125
125
... More
Supplying and Fixing following way , horizontal type Three pole and neutral , sheet steel , MCB distdistribution board , 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnection , powder painted including, earthing etc as required. (But without MCB/RCCB/Isolator).
-
-
-
... More
4 - way (4+12) , Double door.
1
4372
4372
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA 'C' curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
Single Pole
12
269
3228
... More
Supplying and fixing following rating , Four pole , 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
63 A
1
1203
1203
... More
Providing & laying earth connections from earth electrode with 4 mm dia copper wire in 15mm dia GI pipe from earth electrode including connetion with copper thimble excavation and re-filling as required.
3
343
1029
... More
Providing and fixing of 4mm diameter copper wire on surface or in recess for loop earthing along with the existing surface recesses conduit/ submain wiring/ cable etc. as required.
15
155
2325
... More
Supplying of smart LED Bulb Similar to Havells LED ADORE 7w B22 CDL 2 STAR Lamp or Cromton/ Bajaj/ Havells/ Philips.
1
152
152
... More
Supplying of 12W LED, 6000K Bulkhead fittings similar to Luker, cat no. LBKOVSL 12 its equivalent.
1
738
738
... More
Supply of 20W LED Retrofit Tube light Batten Make: Crompton, Model: DIJB12LT8-20 or its equivalent to IS specification.
14
521
7294
... More
Supply of 20W LED,6500K, 4 Feet, Retrofit Tube light similar to Philips, Model no. 20W865 T8 IND I 2100lm or its equivalent to IS specification.
14
434
6076
... More
Supplying of LISO slim surface 15W Round shape LED similar to LUKER ELEGANT series of model no. LCL15NR or its equivalent
10
955
9550
... More
Supplying of LIVIANO slim Panel 15W LED Round shape LED similar to LUKER ELEGANT series of model no. LIPR15/LIPR15N or its equivalent
18
787
14166
... More
Supplying of 5 star Energy saving ceiling fans BLDC (26W to 32W), 1200mm sweep (White), Make: USHA Model: Techno Air (Without remote) or equivalent.
14
5125
71750
... More
Supplying and fixing of ACDB of 20A including MCB Plug & Socket 20 A DP With Plastic Plug ,similar to Havells Cat DHDPHDP020 or its equivalent.
5
1062
5310
... More
Supplying of Plastic Ventilating Fan of 250mm sweep including suitable size louver, Make:- USHA, Model No.- 250MM CRISP AIR EXH FAN or equivalent.
1
2237
2237
... More
Supplying installation testing and commissioning of following rating electronic voltage stabilizer single phase including connection etc. as required.Make V Guard Model VND 400 & VND 500 or its equivalent.
-
-
-
... More
4 KVA
3
5433
16299
... More
5 KVA
2
6351
12702
... More
Supplying, installation, testing and commisioning of following Ton Capacity BEE 5 star Inverter High wall Split Type Air Conditioner (1 phase,220V), make: HITACHI TOUSHI PLUS 5200XL INVERTER - R32 - RAS.E518PCAIBS 1.5 TR and HITACHI TOUSHI PLUS 5200XL INVERTER - R32 - RAS.E522PCBIB - 2.0 TR or its equivalent with with copper condenser coil wall bracket, providing standard length of refrigerant copper pipe including cutting drilling holes on the wall for passing gas pipe, cementing, painting to give an smooth finish and wrapping PVC Non adhesive white tape over insulation of gas pipe etc. as required.
-
-
-
... More
1.5 Ton
2
82309
164618
... More
2.0 Ton
2
107044
214088
... More
Dismantling and Re-installation, testing and commissioning of following capacity split type Air Conditioner suitable for wall mounting i/c cutting/ drilling holes on the wall for passing gas pipes , fixing PVC pipe on the wall through the holes and cementing, painting to give an even look and smooth finish, wrapping PVC non adhesive tape over insulation of gas pipe etc including gas charging as required and as per the direction of E-in-C.
-
-
-
... More
1.5 /2.0 Ton
1
3296
3296
... More
Supplying and fixing of 20mm size of PVC pipe along with accessories for fixing as drain pipe to IDU of split type Air conditioner in surface/recess make: Modi's.
15
44
660
... More
Providing Earthing with safe earthing electrode of galvanization 80 to 100 microns length 2000 mm, 48mm dia and inner space to be filled with crystalline conductive mixture including filling - up with electrodite (Back fill Compound) as required for safe earth electrode and providing masonary enclosure with cover plate having locking arrangement etc. as required. (Similar to ASHLOK make SEE brand safe earthing or equivalent).
1
13824
13824
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%