Get tender documents at just ₹200 per tenderKnow More
Search made simple for latest tendersNo hidden charges. No keyword restrictionsExplore Our Plansor Pay Per Tender

Bid Number: GEM/2019/B/303328 Dated: 05-08-2019 Bid Document Bid Details Bid End Date/Time 26-08-2019 11:00:00 Bid Life Cycle (From Publish Date) 90 (Days) Bid Offer Validity (From End Date) 60 (Days) Ministry/State Name Andaman & Nicobar Department Name Police Department Andaman & Nicobar Organisation Name N/a Office Name Police Head Quarter Total Quantity 150 Item Category Analog Transreceiver-Mobile MSE Exemption For Years Of Experience And Turnover Yes Startup Exemption For Years Of Experience And Turnover Yes Bid to RA enabled No Analog Transreceiver-Mobile ( 150 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) FEATURES Frequency Range (MHz) 68-88 68-88 Types of Bandwidth VHF Full Band VHF Full Band Number of Channels of Transreceiver 128 * Channel Spacing 12.5 * Frequency Spread without degradation in Tx / Rx Specification 22 * Frequency Stability 5 * Antenna Impedance 50 * 1 / 6 TRANSMITTER RF Power output setting of transmitter Programmable * Maximum Transreceiver RF Power Out put 25 W, ±0.5dB * Type of Emission 11 KOF3 * Frequency deviation ± 2.5Khz max. for 100% at 1KHz * Modulation Sensitivity 1 to 10mV at 1 KHz at mic. Input for +/- 1.5 KHz standard deviation * Modulation Distortion 5 * Modulation Fidelity +1, -3 dB of 6dB/ octave pre-emphasis charactrestics from 350 Hz to 2700 Hz with 1KHz as reference * Spurious & Harmonics Suppression (dB) 60 * VSWR 1.5 * RECEIVER Sensitivity at 12 dB SINAD 0.3 * Squelch Sensitivity of receiver 0.25 * Adjacent Channel Selectivity (dB) 60 * Image Rejection (dB) 65 * Audio Output, (with less than 5 % distortion at 1 KHz reference measured at specified AF output) 1 * Audio Response +1, -3 dB of 6dB/ octave de- emphasis charactrestics from 350 Hz to 2700 Hz with 1KHz as reference * ACCESSORIES Antenna Suitable 1/4 wave 0 dB whip Antenna * Programming kit Yes * Technical repairing & maintenance manual with complete block diagram, circuit layout etc in soft as well as hard copy Yes * VARIOUS CONFIGURATION Simple Press to talk yes * 2 / 6 FEATURES Protection against high VSWR yes * CTCSS or DCS yes * PTT ID Encode Yes * Busy Channel Lockout Yes * Channel Scanning with call quieting facility Yes * Selective Call Decode Yes * Capable of being Killed/ Unkilled Yes * Emergency SOS/SIREN Yes * LCD Display (Min 4 characters) Yes * Automatic Number Identification (ANI) Yes * Talk-around Yes * DTMF Microphone Yes * Built-in GPS No * Signaling DTMF * POWER REQUIREMENTS Power Source 12 V DC * GENERIC Internal Speaker impedance 8 * External Speaker impedance 16 * Output Termination UHF female socket * Built in speaker Yes * Facility of external speaker Yes * Weight of Transreceiver with Battery 2 * Other features - * SAFETY Protections Reverse polarity protection & short circuit protection * SERVICE Warranty 2 2.0 OPERATING CONDITION Minimum Operating temperature -10 * Maximum Operating temperature 55 * Minimum Storage temperature -40 * 3 / 6 Maximum Storage temperature 70 * Humidity non- condensing (at +40 oC ) 95 * TEST REPORT DETAILS conformity to Dry Heat for 16 hrs at a maximum temp in accordance with IS:9 000/part-3/section-5/ 1977 latest Yes Yes conformity to Cold Test for 4 hrs at a minimum temp in accordance with IS:9 000/part-2/section-4/ 1977 latest Yes Yes conformity to Damp Heat (Cyclic)Test for 2 Cycles of 24 h each at a temp of 40 degree C & 95% RH in accordance with I S:9000/part-5/sectio n-1/ 1991 latest Yes Yes Drop Test (in packed condition): IS 9000 Part VII/SEC,3/1979 (reaffirmed 2004): Six drops one on each face, Height of fall 1000 mm incase of handheld items and 500 mm in case of other items Yes Yes Vibration Test: IS 9000 Part VIII/1981 (reaffirmed 2006): 12 hours, 4 hours along with each axis, at 15-150 Hz and with amplitude of 0-15 mm/2g Yes Yes Storage Test: IS 900

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.