Indian Army Tender

Chair CBA , Chair CBA All specification as per drawing

Charpoy IP Hard top , Charpoy IP Hard top. Overall size shall be 1980mm long and 900mm wide and 440mm high. Two long rails and two short rails shall be of 25mmx65mmx16 gauge MS rectangular pipe .The legs shall be of size 32mmx32mmx16 gauge welded to long and short rails as shown on drg.Two stiffeners of size 25mmx25mmx16 gauge shall be provided in equidistant between two opposite long rails. Six number cleat of size 25mmx60mmx6mm shall be welded with frame to support ply. Two stiffeners joining legs of size 25mmx25mmx16 gauge shall be provided at 150mm from ground level .12mm thick commercial plywood shall be provided for top as shown on drg with proper nut and bolt .one nut and bolt shall also be provided at centre of each stiffeners for fixing the plywood irrespective of what is shown on drg. PVC hard rubber shoes shall be fixed at bottom of each leg. All steel surfaces shall be painted with synthetic enamel black in color before applying a coat of primer. Rest all as per drg. Drg No FD/MAP II/01

Form with back , All as shown on drawing Overall size shall be 1800mm long, 510 mm wide and 900mm high. Steel frame shall be of 25mm square tube of wall thickness 1.6mm frame at steel level shall be 300 mm wide and at bottom of legs, level shall be 460 mm wide Stiffeners of 25mm square tube shall be provided at bottom. Top of side stifferners shall be at 100mm from bottom 25mm square tube shall be stiffened with long stiffener made to shape welded in the middle of side stiffener. Wooden seat shall be teak wood in one piece and size of 1800mm long 255mm wide and 25mm thick bolted to frame with 3 mm dia GI bolts fixed with nuts and washers steel frame shall be 1500 mm long in such way that teak wood shall project 1500mm from frame one each side. Back rest of wood shall be 1800mm long 150mm wide and 19 mm thick fixed to steel frame with GI Bolts & nuts and washers. All steel and iron surfaces shall be painted with two coats of enamel paint over a coat of primer after preparation of surfaces. Painting shall be done with spray machine. All wood surfaces exposed to view when placed in position shall be french polished with high gloss finish. Legs shall have four hard rubber shoes (this drawing has been superseded by drawing No FD 77M. (FD 76, FD 401)