Indian Army Tender

Almirah Large Steel , Almirah Large (Steel) 1/2 Hanging 1/2 Shelving. All as shown on drawing. Overall size shall 920mm long, 485mm wide and 1985mm high. The base shall be 100mm high. The base shall be made of two numbers mild steel sheet channels shape with ends covered and welded to bottom of almirah. Mild steel sheet for channel shall be 1mm thick. The base channel shall be welded at 50mm from each end of 920mm length. Top, sides, back, bottom and front of almirah shall be 1mm thick mild steel sheet. Two shelves shall be provided at 350mm and 700mm from bottom of almirah. Ahan ging rod 60mm from top shall be provided which shall be of 20mm dia steel chromium plated conduit pipe of wall thickness 1.25mm. Two sockets shall be provided at the end of hanging rod. Front shutters shall have two leaves. A steel chromium plated handle 100mm long shall provided to shutters. A three way locking device shall be provided to front shutters. Each leaf of front shutter shall be hinged with three nubers butt hinges 75mm long and shutters shall be side hung. All joints and welding, fixing shall be done with standard workmanship. All hung. All joints and welding, fixing shall be done with standard workmanship. All steel surfaces exposed to view when placed in position shall be given two coats of enamel paint over a coat of primer after preparation of surfaces. Painting shall be done with spray machine. Rest all as specified/ shown in drawing and directed by Enginer-in-Charge.Drg No FD-1033

Bath Stool PVC , Bath Stool PVC. As per trade pattern. Drg NoFD/E6/MAP/07

Bed hard , Bed hard. All Steel member shall be 18 Gauge MS pipe. The frame of head board and foot board shall be of 38mm MS square pipe.18mm MS square pipe shall be provided in the inner of head/foot board frame as shown in drg. 18mm thick both side prelaminated MDF board of walnut shade with 4mm thick teakwood beading shall be screwed to MS strip arc welded with 18mm thick square pipe with standard workmanship both in head/foot board. One stiffener of size 25mmx25mm shall be welded between the two legs of head board over 150mm from the ground level. The top of bed hard shall be of 12mm thick BWR grade plywood of approved make fixed over the four equidistant stiffener of size 25mmx25mm SQ MS pipe in line with bottom of 25x65mm long rail section. PVC shoes shall be provided to legs of bed. All steel members shall be finshed with two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper in black colour. Rest all as per drawing. Drg No FD/E6/MAP/08