Forests And Environment Department Tender

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polumer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be separately).

Providing and fixing on wall face unplasticised Rigit PVC rain water pipes conforminh to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expasion, (i) Single socketed pipes.

75 mm diameter

110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fitting / accessories for unplasticised Rigit PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion.

Single tee with door (110x110x110 mm)

Bend 87.5°

75 mm bend

110 mm bend

Fixing of frame work made of special sections, power pressed from M.S. sheets galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS: 277 and cinsisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, etc. all complete as per specification and direction of the Engineer in Charge but excluding the cost of painting with:

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks)

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Finishing walls with Acrylic Smooth exterior paint of required shade:

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm).

Walls

Providing and fixing white vitreous china pedestal type water closet (European type) with seal and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fitting & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :

Lyrics S Trap EWC-LYS-WHT-3885155300 UFSM

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

32 mm dia

Providing and fixing in position 25 mm diameter mosquito proof coupling of approved municipal design.

Providing and fixing mirror of susperior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :

Circular shape 450 mm dia

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fitting of approved quality and colour, weighing not less than 105 gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour.

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fitting and brackets, cutting and making good the walls wherever require :

White Viteous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Removing of Old timber structure and ACC Board ceiling for preparing the site for further modification.

Providing and fixing of PVC Elbow

Elbow 90° 110 cm

Providing and fixing of PVC Pipe

110 CM

Providing and fixing of PVC Elbow food quality

Elbow 110 cm

Providing and fixing of wash basin waste coupler approved good quality

Providing and fixing CP pillar cock of approved quality

Providing and fixing CP Angular cock of approved quality

Providing and fixing connector pipe 60 cm length

Providng and fixing health faucet of approved quality

Providing and fixing 1.5 feet acrylic shelf with edges round off supported on anodised aluminium angle frame and guard rail complete fixed with 40mm long screws rawl plugs etc. complete

Providing and fixing 2 in 1 Bib Cock approved good

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge

20 mm nominal dia Pipes

Providing and fixing 20 mm CPVC Brass Elbow of approved quality .

Providing and fixing 20mm CPVC BrassTee of approved quality .

Providing and fixing CPVC FTA Brass (3/4"x3/4")

Providing and fixing CPVC plain Elbow (3/4")

Providing of S.S.Clamp 2"

Providing of CPVC Solvent (200 ml )

Providing of S.S.Screws 35 x 8

Providing & installation of Concealed wiring and electrical fitting in ceiling with fixing of 22W LED lights 10 nos. Ceiling fans 04 nos. Focus lights 04 nos. and Air Conditioner (AC) of 1.5 ton 02 Nos. etc.