Directorate Of RD PRIS And ULBS Tender
To inquire about any e-tender the Andaman & Nicobar Islands government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder one can find every eprocurement Punjab tender on BidAssist. BidAassist has collated each and every Eproc Andaman & Nicobar Island Tender on its website. Looking for Andaman & Nicobar Island tenders online or going through the cumbersome government websites for it, has been made easier with the help of BidAssist.
Directorate Of RD PRIS And ULBS Tender
Civil And Construction
Excavation
Eprocure
Opening Date31 May 2022
Closing Date20 Jun 2022
Tender Amount₹ 1,21,71,312
Costs
EMD
₹ 2,43,426Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_RDPRI_6072_1Bid Award Id
ViewTender No
SE/PRI/ANI/PB/2020-2021/07Tender Authority
Directorate Of RD PRIS And ULBS ViewPurchaser Address
-Website
http://eprocure.andaman.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
1:1½:3 (1 Cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).
1.27
-
-
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
33.24
-
-
1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size).
45.99
-
-
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level :
-
-
-
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
23.91
-
-
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
46.74
-
-
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement:
-
-
-
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
19.16
-
-
Providing and fixing upto floor five level precast cement concrete hollow block including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centring, shuttering complete.
-
-
-
1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
58.18
-
-
Centring and shuttering including strutting, propping etc. and removal of form for :
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete
104.36
-
-
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
53.24
-
-
Suspended floors, roofs, landings, balconies and access platform.
9
-
-
Lintels, beams, plinth beams, girders, bressumers and cantilevers.
516.45
-
-
Columns, Pillars, Piers, Abutments, Posts and Struts.
188
-
-
Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours White, Ivory, Grey, Fume Red Brown, laid on 20mm thick bed of cement mortar 1:4 (1 cement :4 coase sand) including pointing the joints with white cement nad matching pigments etc, complete.
243.51
-
-
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position :
-
-
-
Superior hard wood category -II
1.93
-
-
Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc.
-
-
-
Superior hard wood category -II
43.33
-
-
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked black enamelled M.S butt hinges with necessary screws excluding, panelling which will be paid for separately,all complete as per directionof Engineer -in- charge. Superior hard wood category -II
-
-
-
35 mm thick shutters
27.09
-
-
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed sghutters 25 mm to 40 mm thick:
-
-
-
Superior hard wood category -II
1.89
-
-
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including black enamelled ISI marked M.S butt hinges with necessary screws. Superior hard wood category -II
-
-
-
35 mm thick
29.52
-
-
Providing & Fixing of precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheetand polyester top coat 15-18 micorns. Sheet should have protective guard film of 25 micorns minimum to avoid scratche while transporatation should be supplied in signle length upto 12 metre or as desired by Engineer-in-charge.The sheet shall be fixed using self drilling /self tapping screws of size (5.5 x55mm) with EPDM seal or woth polymer coated J or mL hooks bolts and nuts 8mmdiameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal / vertical or curved surfaces excluding the cos tof purlins, rafters and trusses and including cutting to size and shape wherever required.
460.09
-
-
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 micorns using self drilling /self tapping screws or with polymer coated J or L hooks bolts and nuts and or G.I seams bolts and nuts, G.I plain and bitumen washers complete.
-
-
-
Ridge
79.3
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
Thermo-Mechanically Treated bars of grade Fe-500D or more.
7224.07
-
-
Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19 x 19 mm M.S square tube of 19 guage, EPDM rubber gasket wather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S screws of 65/100 mm size complete as per manufactures specification and directionm of Engineer-in charge.
20.4
-
-
Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S frame covered with 5mm thick heat moulded PVC "C' channel of size 30mm thicknes , 70mm width out of which 50mm shall be falt ad 20mm shall be tapered in 45 degree angle on either side forming styles; and 5 mm thick , 95 mm wide PVC sheet out of wich 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom and l115 mm wide PVC sheet out of which 75 mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top & bottom and lock rails shall be provided either side of the panel. 10mm (5mmx2) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & Bottom rail .panelling of 5mm thick both side PVC sheet to be fitted in the M.S frame welded /sealed to the styles & rails with 7 mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side , and joined together with solvent cement adhesive . An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' channel using PVC solvent adhesive etc. complete as per dirction of Engineer-in -charge . Manufactures speocification & drawing (for W.C and bathroom door shutter).
-
-
-
30 mm thick plain PVC door Shutter
6.4
-
-
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.
-
-
-
Using M.S. angels 40x40x6 mm for diagonal braces.
4.58
-
-
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.
-
-
-
W.C. pan with ISI marked white solid plastic seat and lid
4
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :
-
-
-
White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap.
6
-
-
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board
-
-
-
510x1040 mm bowl depth 250mm.
2
-
-
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe
-
-
-
32 mm dia
8
-
-
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :
-
-
-
Rectangular shape 453x357mm
6
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall
-
-
-
15 mm nominal outer dia .Pipes.
120
-
-
25 mm nominal outer dia .Pipes.
120
-
-
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
25 mm nominal bore
19
-
-
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
-
-
-
100 mm diameter
4
-
-
Providing and fixing brass bib cock of approved quality :
-
-
-
15 mm nominal bore
9
-
-
Constructing masonry Chamber 30x30x50 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 Cement :5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design:
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5.
4
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
8000
-
-
Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement : 3 fine sand) etc. complete excluding plastering of the jambs, sills and soffits.
-
-
-
50 mm thick
4
-
-
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :
-
-
-
250x10 mm
12
-
-
Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
-
-
-
125 mm
20
-
-
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
-
-
-
300x16 mm
5
-
-
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand)finished with a floating coat of neat cement on walls and bed concrete etc. Complete as per standard design. Inside dimensions 600x 850 mm and 45 cm deep for pipe
line with three or more inlets :
-
-
-
With common burnt clay F.P.S. bricks (non modular) bricks of class designation 7.5
2
-
-
Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes
-
-
-
110 mm diameter
70
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting , risers of steps and dados over 12 mm thick bed of cement mortar 1:3(1 cement :3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
128.48
-
-
12 mm cement plaster of mix :
-
-
-
1:4 (1 cement : 4 fine sand)
966.16
-
-
12 mm cement plaster finished with a floating coat of neat cement of mix :
-
-
-
1:3(1 cement : 3 fine sand)
128.14
-
-
Finishing walls with Acrylic Smooth exterior paint of required shade :
-
-
-
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm).
384.73
-
-
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:
-
-
-
Two or more coats on new work
384.77
-
-
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:
-
-
-
Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
341.41
-
-
Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade:
-
-
-
Two or more coats on new work.
15.48
-
-
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
-
-
-
One or more coats on old work.
237.8
-
-
French spirit polishing :
-
-
-
One or more coats on old work.
411.88
-
-
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.
-
-
-
40mm thick with 20mm nominal size stone aggregate.
32.21
-
-
Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m.
-
-
-
All kinds of soil.
900
-
-
Providing and fixing upto floor five level precast cement concrete solid block including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centring, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 Cement : 3 fine sand) on exposed surface complete.
-
-
-
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).
22.5
-
-
Supplying and filling in plinth with coarse sand under floors including, watering, ramming consolidating and dressing complete.
76.6
-
-
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work :
-
-
-
25 mm dia. nominal bore
200
-
-
40 mm dia. nominal bore
300
-
-
50 mm dia. nominal bore
500
-
-
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
-
-
-
25 to 40 mm nominal bore
10
-
-
Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
42.24
-
-
Providing and fixing plain Multipurpose Cement board (High Pressure steam cured) as per IS : 14862 : 2000) with suitable fibre cement screw in ceiling etc. complete (frame work to be paid separately) :
-
-
-
6 mm thick cement board
54.92
-
-
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : Superior hard wood categorgy -II
-
-
-
50x12 mm
47.7
-
-
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
-
-
-
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
138.24
-
-
Providing and fixing PVC septic tank of approved design and make of size of model Type- II having inside dimensions 1000 mm diameter , 2000 mm length with 20-25 user/ flushing day by day & laying tank in position and filling inside half the tank with water including transportation etc. complte as per the direction of Engineer - in - cahrge ( excluding earth work , c c& filling of earth which will he paid separately)
4
-
-
Providing and Palcing round logs of required size and Shope of Cat- 1 (A) for seating top as per direction of engineer - in charge
1.5
-
-
Providing and Palcing round logs for post of Umbrellaroof of Cat-Vi (A) (i) of required size and shope as per the direction of engineer in Charge
0.86
-
-
Providing cane work in Roofing of Hatched leave Umberella shed as per direction of Engineer -in - charge.
-
-
-
Mota cane
370
-
-
Malai Cane
270
-
-
Providing thatching leaves for thatched leave umbrella Roof as per Direction of Engineer -in- charge
3440
-
-
Restoraction of Japanese Bunkers (3.00 Nos) by cleaning and removing of vegetation as per the direction of Engineer -in- charge
1
-
-
Providing of Necessary Safety Equipments for Disaster management at Beach of reputed brand and manufacturers as per required standard and designation. (copy of purchasing committee's is attached).
-
-
-
Buoy -Ring (60 cm)
10
-
-
Life Jackets
20
-
-
Providing ,Supplying and fixing of Wooden Post for crocodile Protection net as per design with support of round logs of required shape and size of cat -VI(B) as per the direction of Engineer - in- charge).
10.72
-
-
Polypropylene rope crocodile net of 4 mm dia rope of diagonal 8" x 8" upper and bottom side rope and hanging the side at the interval and concrete post of 4 kg weight of every interval of 5 meters and also identificationfor position of net all works complete) complete as per the direction of engineer-in-charge. (copy of purchasing committee is attached)
368
-
-
Providing and Fixing of round log for post for construction of Watch Tower with Proper shape & Size at par cat- VI (B) as per the direction of Engineer - in -charge.
5.09
-
-
Providing and Supplying of necessary Furnitures, Equipments and Accessories required for the project for Smooth running and Management from approved brand and manufacturers as per required standard.
-
-
-
Plastic Chairs of class I brand manufactured i.e Supreme, Nilkamal or equalent.
22
-
-
Wooden Dining Table of Size 4x4 feet i/c 4 Nos of adjecent chairs
10
-
-
Sofa Set of Padauk/Teak Wood or equalent class I category of wood.
2
-
-
Plastic ORNATE Chairs of class I brand manufactured i.e Supreme, Nilkamal or equalent.
20
-
-
Wooden Tea Table of Size 3x2 feet of Padauk/tealwood or equalent class I category of wood.
8
-
-
Wooden Corner Table of Size 3x2 feet of Padauk/tealwood or equalent class I category of wood.
4
-
-
Wooden Bed Cot of Size 3x6 feet of Padauk/tealwood or equalent class I category of wood.
8
-
-
Wooden Single Sitting Sofa for a minimum capasity of 4 Persons of Padauk/tealwood or equalent class I category of wood.
8
-
-
Wiring for Light Point /Fan Point/exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FLS PVC insulated copper conductor single core cable etc as required.
-
-
-
Group -C
114
-
-
Wiring for Light / Power Plug with 2 x 4 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 no 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
112.9
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following size of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
-
-
-
2 x 2.5 sq.mm + 1x 2.5 sq.mm earth wire
112.8
-
-
2 x 6 sq.mm + 1 x 6 sq.mm earth wire
28.9
-
-
4 x 6 sq.mm + 2 x 6 sq.mm earth wire
8
-
-
Supplying and fixing following piano type switch/ socket on the existing switch box / cover including connections etc.as required.
-
-
-
5/6 amps switch
14
-
-
3 pin 5/6 amp socket outlet
14
-
-
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
6
-
-
Supplying and fixing Metal box of size 150 mm X 75 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 socket outlet & 5/6 amps piano type switch connection, painting etc. as required.
10
-
-
Supplying and fixing metal box of size 180 mm x100mm x60 mm deep (nominal size)on surface or in recess with suitable size of phenolic laminated sheet cover in front i/c providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps piano type switch connection painting etc .as required.
8
-
-
Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.
24
-
-
Supplying and fixing brass batten/ angle holder including connection etc.as required.
32
-
-
Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
4
-
-
Supplying and fixing following way , single pole and neutral , sheet steel , MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, power painted i/c earthing etc.as required. (But without MCB/RRCCB/Isolator)
-
-
-
4way double door
2
-
-
2+4way double door
2
-
-
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
2+4way double door
4
-
-
Supplying and fixing 5 amps to 32 amps rating, 140/415 volts,"C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc.as required.
-
-
-
Single pole
28
-
-
supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc.as required.
-
-
-
40 amps
4
-
-
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc.as required..
-
-
-
40 amps
4
-
-
Earthing with G.I. earth pipe 4.5 metre long,40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal / coke and salt as required.
8
-
-
Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I Pipe from earth electrode including connection with copper thimble excavation and re- filling as required.
32
-
-
Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.
80
-
-
Supplying and installation of 20 w LED tube light fitting/ fluorescent tube fitting/ compact fluorescent fitting of all type complete with all accessories and tube etc.directly on ceiling/ wall,i/c connection with 1.5sq mm FRLS PVC insulated copper conductor single core cable and earthing etc. as required .Make: crompton or equivalent to ISI standard.
24
-
-
Supplying and installation of ceiling fan (1200 mm sweep),i/c wiring the down rods of standard length (upto 30cm) with 1.5sq.mm FRLS PVC insulated, copper conductor, single core cable etc. as required .Make: Bajaj or equivalent to ISI standard
2
-
-
Supplying and Installation of ceiling fan (1200mm sweep) 5 star ISI mark, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. Make Bajaj or equivalent to ISI standard.
4
-
-
Supplying LED 15W CDL Lamp, Make: Havells or Equivalent to ISI standard
32
-
-
Supplying and Installation of 10W LED Bulk head wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS lamps per fitting, complete with all accessories including connection etc. as required. Make Havells or equivalent to ISI standard.
30
-
-
Supplying and Installation of Decorative Wall Bracket with LED Bulb, similar to Havells Stylo decorative, wall mounting, chamoange gold finish fixture with plastic body. Oredering code LHOECE1TZ10014. Make:Havells or Equivalent to ISI standard
16
-
-
Supplying and installation of wall fan (400 mm , sweep), including making good the damage, connection, testing commissioning etc. as required. Make: crompton or equivalent to ISI standard.
1
-
-
Supplying and Installation of Exhaust fan (300mm sweep), including making good the damage, connection, testing commissioning etc. as required. Make: Crompton or Equivalent to ISI standard
4
-
-
Providing and fixing wooden board of size 10' X 12" for fixing of energy meter etc as required.
8
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements