Andaman Lakshadweep Harbour Works Tender

Providing and fixing of 4 Pole MCCB 100 Amps, 16 KA breaking capacity of ISI reputed brand like L&T/Legrand/Havells/ Indo Asian/ equivalent with standard adjustable thermomagnetic release and spreader terminals, drilling holes in cubicle panel, making connections in the existing Pillar Box required for High Mast Light etc., including cost of MCCB, Spreader Terminals, suitable bolts and nuts, all labour charges, minor tools and plants required, GST, LWC etc. The quoted rate should include each and every elements of this item and no additional cost is allowed. a)To be fixed in the incoming pillar box near jetty Entrance- 1 No.

Supply, installation, testing and commissioning of Hot dip galvanized tubular steel pole of 16 mtr height high mast lighting tower confirm to IS 2713/80 (Part - 1&2) with lighting tower shaft in double sections suitable for 55 mtr/sec wind speed with raising and lowering system comprising head frame, luminiaries carriage suitable to install 8 Nos. LED floodlight luminiaries of 200 Watts in symmetrical arrangement, double drum winch, 6 mm dia SS Wire rope, trailing cable, connector, integral power tool motor/ manual handle, junction box, lighting finial, wiring materials, power cables between panel and mast, MCB in base compartment, carriage mounting clamps & bolts and anti aviation lamps etc. foundation bolts with nuts including required steel re-inforcement, civil works, concreting works applicable to the site condition and earthing to the high mast as suitable, providing schematic drawing of the high mast light including technical specification of each and every accessories, including cost of all materials, 8 x 200 Watts LED luminiaries (Make - Bajaj/Crompton/ Philips/Syska /any ISI reputed brand), labour charges and tools and plants required for entire installation and commissioning, transportation charges to worksite, GST, LWC etc., complete. The quoted rate should include each and every elements of this item and no additional cost is allowed.

Supply, fixing, testing and commissioning of surface mounting Timer switching device with IP - 65 enclosure daily programmable with suitable 4 Pole contactor of 32/40 Amps, control voltage 220 VAC of reputed make like L&T/Legrand/Havells/equivalent including cost of all materials, labour charges, GST, LWC, minor tools and plants etc. The quoted rate should include each and every elements of this item and no additional cost is allowed. a)To be fixed in the High mast light control panel - 2 Nos.

Supplying and laying 25 mm x 5 mm GI strip alongwith the all cable route including connection/ terminating with GI nut, bolt, spring washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of GI nut bolt & spring washer spaced at 50 mm) including cost of all labour charges, minor tools and plants required, GST, LWC etc. The quoted rate should include each and every elements of this item and no additional cost is allowed. a)2 Nos. Earthing for High Mast