Andaman Lakshadweep Harbour Works Tender

Providing from work including centering & shuttering so as to give a rough finish, strutting and propping etc, and removal of the same from reinforced cement concrete and plain concrete work as directed by the EIC, including cost of centering and shuttering, all LWC, GST, cost of binding materials,cost of transportation charges of all material to work site, cost of ballies, cost of minor tools, etc, complete. IS:2062

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - including cost of cement, local quarry Stone, aggregates, pulverized sand, all labour charges, LWC, GST, etc, complete. All work up to plinth level 1:3:6 (1 cement, 3 pulverized sand and 6 graded local quarry stone aggregates 40 mm nominal size)" IS:456(2000)

Providng and laying in position cement concrete of specified grade excluding the cost of centering and shuttering, including cost of cement, stone aggregates, pulverised sand, all labour charges, cost of minor tools, transportation charges, GST, LWC, etc, complete All work up to plinth level. 1:2:4 (1 cement, 2 pulverised sand and 4 graded stone aggregates 20 mm nominal size). IS:456(2000)

Providing and laying in position specified grade of reinforced cement concrete 1:1.5:3 excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level, including cost of cement, local stone aggregates, Mainland river sand, transportation charges of all materials to work site, all labour charges, minor tools, GST, LWC, etc, complete. 1:1½:3 (1 cement, 1½ mainland river sand, 3 graded stone aggregates 20 mm nominal size) IS:456(2000)

Supplying and applying pre-tested and approved water based concret uring compound to concrete/ masonary surface, all as per manufacturers specification and as per the direction of EIC including cost of curing compound, all labour charges, transportation charges to worksite, minor tools, LWC, GST etc, complete IS:516(1959)

Providing and fixing Tor steel reinforcement for RCC work including cutting, bending, bindingand placing in position cost of binding wire, minor tools etc, complete. The rate is inclusive of consumable items and GST & LWC. IS:1786(2008)

Steel work in built up pedestal of Stairs , including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including cost of all materials, MS pipe, MS Angle and MS Plate etc, special shaped washers, transportation charges of all materials to worksite, labour charges, LWC, GST, etc, complete. IS:802(1978)

Cement concrete flooring 1:2:4 (1 cement, 2 Pulverised Stone Sand, 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, etc. but excluding the cost of mising of steps etc. compete. 50mm thick with 20mm nominal size stone aggregate IS:1237(2012)

Providing and fixing prepainted galvanised sheets ( size, shape and pitch of corrugation 63mm as approved by Engineer-in-charger) 0.50 mm ( ± 0.05 %), total coated thickness with zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns, sheet should have protective gaurd film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/ self trapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal / vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. The rate is inclusive of consumable items , all labour charges , minor tools LWC, GST, etc complete. IS:277(2003)/ 513(1994)

Chequerred precast cement concrete tiles 22m thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete on 20 mm thick bed of cement mortor 1:4 ( 1 cement, 4 coarse sand). IS:13801(1993)

Providing and fixing kitchen sink with CI brackets, CP brass chain with rubber plug, 40 mm CP brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required. White glazed fire clay kitchen sink of size 660x450 x 250 mm. IS:1742(1983)/13983(1994)

Providing and fixing wash basin ( wall hung) Model: CNS-WHT-WB13 with half pedestal (Model: CNS-WHT-WB13H) of 1st quality, C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm waste coupling full thread with 80 mm height of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required as directed by the EIC, including cost of all labour charges, minor tools etc, complete. Wall hung basin of size 660 x 400 x 200 mm of 1st quality. IS:2556(2004)

Providing and fixing swap nech tap with left hand operating knob pillar cock 1st qualtiy including cost of pillar cock, all labour charges etc complete. As directed by the Engineer-In-charge. IS:9763(2000)/2065(1983)

Providing and fixing heavy duty 15 mm dia 2 in 1 bib cock of 1st qualtity including cost of bib cock, wall flange, all labour charges etc complete. As directed by the Engineer-In-charge. IS:8931(1993)

Providing and fixing hand shower of 1st qualtiy including cost of hand shower all labour charges, transportation charges etc complete as directed by the Engineer-In-charge. IS:2064(1993)

Providing and fixing overhead shower 200x200mm square shape single flow (ABS body chrome plated with grey face plate) with rubit cleaning system 1st quality including cost of shower rose, all labour charges etc complete. As directed by the Engineer-In-charge. IS:2064(1993)

Providing and fixing of 450 mm long braided hose two 15mm nuts & rubber washers without nipple of 1st quality including cost of materials, all labour charges etc complete. As directed by the Engineer-In-charge IS:2064(1993)

Providing and fixing of angular cock with wall flange 1st quality including cost of angular cock, with flange all labour charges etc complete. As directed by the Engineer-In-charge. IS:2064(1993)

Providing and fixing towel rack with lower hanger (Stainless steel) with hook with fitting arrangement of 1st quality Including cost of materials, all labour charges etc, complete. IS:2064(1993)

Providing and fixing of soap dish holder of 1st quality including cost of all materilas. all labour charges, transportation charges, etc complete Model No. ACN-1131N IS:2064(1993)

Providing & Fixing white pedestal type water closet (European type W.C.pan) with seat and cistern of 1st qualtiy - Solo - single piece WC - SLS-WHT-0208BS and softclose seat cover (PP) Solo - ZPS-WHT-1028, White or its equivalent as will be approved by EIC with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. including cost of cement, sand, transportation charges of men and materials to work site etc, complete IS:2586-2(2004)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Internal work - Exposed on wall 20 mm dia pipe. IS:15225(2002)/15778(2007)

Providing and fixing 20 cm thick masonary with Hollow Block of size 0.40 x 0.20 x 0.20 Mtrs. Cast with 1:3:6 cement concrete (1 cement, three crushed stone sand & six graded 20 mm and down size) including curing, fixing with cement mortar 1:4 (1 cement, 4 crushed sand) in walls, again curing, including cost of cement, hire charges of hollow block machine, making charges, transportation charges of all materials to work site, cost of pallets scaffolding charges, minor tools, GST, LWC, etc, complete. IS:2185(Part-1) (2005)

Providing and laying 12 mm cement plaster of mix 1:4 (1 cement: 4 mainland river sand) including the cost of cement, mainland river sand, all labour charges, transportation charges, minor tools, GST & LWC etc, complete. IS:1661(1972)

Applying one coat of cement primer of approved brand and manufacture on walls suface including cost of cement primer, brushes, scaffolding arrangments, transportation charges, all labour charges, minor tools etc. complete. The rate is inclusive of consumable items and GST & LWC. IS:802(1978)

Painting two coat of 1st quality exterior emulsion antifungal paint of approved brand and manufacture heavily undercoated texture of old surface to give an even shade including cost of paint cost of other materials, scaffolding arrangement, scrapping of existing paint surface wherever required, all labour charges, cost of minor tools, transportation charges, scaffolding charges, LWC including GST, etc, complete. IS:2932(2003)

Two coats of old work painting with synthetic enamel colour paint I st quality of approved brand by EIC over steel surface, preparation of surface including cleaning, scraping of the existing painted surface, cost of paint, brush, scaffolding arrangements, transportation charges of all materials to worksite all labour charges, minor tools, including of GST, LWC, etc, complete. IS:29321(2003)

Supply of labours as and when required for department for shifting of accessories and other miscellaneous work as directed by the EIC, including cost of labour charges, minor tools, LWC, GST, etc, complete.

a) Un-skilled Mazdoor(USM)

Conveying of dismantling asphalt/ debries/ earth/ rubbish materials by truck and dumping the same within a lead of 5 KM as directed by the EIC including cost of labour charges, hire charges of truck including POL and operator, minor tools, GST, LWC, etc, complete. IS:1742(1983)

Providing and fixing net (Mosquito net/ netlon) to doors, windows, ventilators, shiutters and partitions etc, as per the direction of the EIC including cost of all materials including PVC net, male - female strip, coupling channel, screws and nuts all labour charges, minor tools etc, complete. IS:4021(1995)

Providing and fixing syntax tank 1000 lit capacity including cost of syntax tank fitting charges,syntex tank,all labour charges,transportation charges, etc complete. IS:12701(1996)

Providing and fixing hand rail by welding etc. to steel ladder ralling, balcony railings & staircases ralling including applying a priming coat of approved steel primer. including the cost of all materials, transportation charges, minor tools, GST & LWC etc, complete. GI pipe 40mm IS:4912(1978)

Providing and laying 1st quality Ceramic glazed floor tiles (300 x 300mm thickness to be specified by the manufacturer) confiorming to IS 13753 of approved make branded 1st quality laid on 20mm thick bed of cement mortar 1:4 (1 cement, 4 mainland river sand ) including pointing the joint with white cement and matching pigment, including cost of cement , grey cement, white cement, transportation charges of all materials to work site, all labour charges, minor tools, LWC & GST etc., complete. IS:15622(2006)