Zilla Parishad Tender

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. a) Above 8.0 metre and upto 10.0 metre

Supplying of following sizes of XLPE insulated Heavy duty armoured Aluminium conductor UG cable of 1.1 KV grade conforming to IS:7098 (Part-I) and IS No. 1554 (Part-I)) 1988 as applicable Make: CCI/Gloster/Havells/Polycab/Finolexa)

a) 6 Sq.mm x 4 Core

b) 10 Sqmm x 4 core

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. a) Upto 35 sq. mm

Supplying and laying of one number double walled corrugated high density polythlene pipe having corrugated on the outer wall and plain surface inner wall confirming to IS: 14930 part-I & II complete with necessary HDPE fittings for protection of 1.1 KV grade under ground cable directly in ground at depth of 50CM i/c excavation and refilling the trench as required. a) 50mm outer dia nominal size

Providing earthing with safe earthing electrode of galvanization 80 to 100 microns, length 2 mtr, outer dia 50 mm, inner dia 19 mm and inner space be filled with crystalline conductive mixture including filling -up with electrolite (Back fill compound) as required for safe earth electrode and providing masonary enclosure with cover plate having locking arrangement etc. as required. (Ashlok)

Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required

Supplying , Installation, testing and commissioning of outdoor type floor mounted cubical panel board non extendable type LT of size 2.00m x 0.6 m x 0.4 m, 3 phase , 440 V, 100 A with both side open i/c front double hang shutter with locking arrangement made with 2 mm thick CRCA sheet, MS Angle, MS flat etc in different compartments to accommodate various size of switch gears and accessories as stated under etc i/c interconnection with suitable rating copper cable . The Panel should have inner earthing with 1 coat of primer & 2 coat of finishing water proof paint (Silver) , fixing of danger plate & PCC work etc as required a) 100 A MCCB, 25 KA breaking load - 01 No b) 40 A MCCB, 16 KA breaking Load - 05 Nos c) 100 A Cut out - 03 Nos d) C.T coil 100/5A - 03 Nos e) Copper bus bar 35 x 5mm - 04 Nos f) Indicator lamp RYB - 01 Set g) Interconnection with 10sq mm PVC insulated copper conductor cable - 01 Job