West Bengal Agro Industries Corporation Limited Tender

Earthing with 50 mm dia Gl pipe 3.64 mm thick x 3.04 Mts. long and 1x4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long Gl bolts, double nuts, double washers incl. S & F 15 mm dia Gl pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts, below the ground level as below: By TATA-Medium Gl pipe

Laying of cable as below, after cutting floor/pavement/ Wall/ and making holes incl. embedding the cable at an average depth as below and mending good the damages to original finish Incl. removing tho rubbish. Avarage Depth:75mm

Supplying and Dravwing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the polythene pipe and by the prelaid GI fish wire and making necy. connection as required.

Construction of suitable reinforced foundation as per standard design With 1:1.5:3 cement concrete M-20 grado for the above high mast considering soil bearing capacity of at site as 10T/Sqmtr,1000mm below GL 300mm above GI Size :60Ommx600mn(Cross Section).

Supply, installation, testing and commissioning FLOOR MOUNTED Type Outdoor type Feeder Pillar Box, fabricated with 3mm CRCA M.S sheet enclosure, dust and Vermin proof (IP65) with rain protection Hood, Powder coated(RAL 7032), Dimension :H350xW350xD200mm, Including S & F of 1 No 16 amos DP MCB, 1NO 2 Pole Contractor (MNX-9,2p, L&T make), 1no. Analog Timer Daily Type-mako GIC,Toggle switch for Auto/Manual, necessary interconnection wiring by 2.5 sqmm for power wiring and 1.5 sqmm for control wiring, 16A capacity 2way Terminal Block to be fixed on 1.6mm MS base.

Supplying & foing 40mm dia medium gauge GI Pipe (ISI-Mediun) Protection with necessary fittings and jointing metarials as required 40mm dla

Finishing of the PVC Insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. b) 2.5 sqmm

Laying of one No, cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos, bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Finishing of the XLPE/PVC insulated amoured cable ends by soldering with cable sockets and insulated tapes etc., including Supplying sockets, soldering materials, tapes etc. and making Connection to switch, BDB and BBC et 2 Core 10 sqmm

CESS 1%

Connecing the equipments to earth bushber incl, S & F G.I. (Hot Dip) wire on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.

Supplying and fixing compression type gland complete with brass gland, brass & ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below: 2 Core 10 sqmm

GST 18%

Supplying and fiixng of 120 Watt LED FLOOD LIGHT CCT 5700K, Beam Angle 60 Degree,Efficasy 110 Im/W(Min),prossuro die cast Aluminium body with IP66 protection potted driver with 5KV In-bult & 10KV external. Make :Eveready/Crompton/Wipro/Bajaj

Providing and erecting place of identification with LED Outdoor type display board of size 1.5ftx1.0ft support through iron angle by means of firmly fixed2 Nos Ring type properly design clamping arrangement anodised hollow squre Al. bars fitted and fixed with nuts,bolts & washers etc to forned a rectangular shaped. Aludecor exterior ACP sheet having 3mm thick should be provided both side over the structure.1Omm transparent acrylic sheet have to be provided over the structure with 2mm thick white acrylic sheet also been arranged over the letter either in English/Bengali respectively. The Display board should be provided with 12V, LED recess mounting type light Contain Lumen Capacity not less than 400 lumen each having cool white in colour and connection should be made at the back slde of the ACP and having provision for entry of 1.1KV grade 2 core 1.5 sqmm PVC flat copper wire. All work should be done as per direction by the E.I.C. All work should be done in accordance with IE rule &IS specification. (Matter will be placed later).

Supply, dellvery, erection and commissioning of 9.0 M high Otagonal High Mast Pole with foundation type base plate and foundation bolts-Top diameter 7Omm, Bottom Diameter 155mm, Section length 9000 mrm, Thickness 3.0mm, Foundation Base plate 250x250x16mn and 4 No Foundation Bolts. Make: Ukarsh/Bansal/Kolkata poles. Pole Shaft : SS conforming to BSEN 10025, Octagonal, continuously Tapered with single longitudinal welding, Polo to be provided withrigid flange plate with provision of fixing 4 No foundatlon bolts.The Pole should be Hot Dip galvanlzed. Door Opening : Door of 500mm length at the elevation of 500mm from Base plate, weather proof with suitable locking arrangement, inside the Pole one no.6Amps MCB and 4 Way Power Terminals block DMC 25A On Bakelite sheet, Earthing stud to be provided in the bottom of the pole. Bracket for fixing Luminaries: Ring Type Bracket should be made of specified Gl heavy duty pipe with minimum 1000mm dia and 40mm dia suitable for mounting 4 No LED light mounting.

Supplying & delivery of XLPE insulated & Sheathed Armoured Aluminium Conductor cable for working voltage upto 1100 Volts of following sizes, Make: Polycab/ Nicco/ Havell's/ Gloster. 2 Core 10 Sqmm (from fedder pillar to Pole terminal block) PVC Al. armoured cable.