Uttar Pradesh State Industrial Development Authority Tender

Supplying & Fixing of Reflective Raised Pavement Markers (Cat Eye) accordance with X-ASTM D-4956-04. Avery Dennision/3m (USA Make) having body moulded body of polycarbonate, ASA, HIPS or ABS able to support a load 13.635 M.T. tested in accordance with ASTMD 4280 type H and other requirement mentioned in MoRTH Circular, its reflective lens made of micro Prismatic lens ( capable of providing total internal reflection of the light) electronically welded to body. The length , height and width iof the body shall not exceed 130mm, 20mm and 105mm respectively. The area of each retro-reflecting surface shall not be less than 13.00Sqcm/. The slop or retro-reflecting surface shall preferably be 35+/-5 degree to base to ensure maximum reflectively. It shall be comply to specificaion of category A of MoRTH circular no RW/NH-33023/10/*-DO-III Dated 11.06.1997. Lenses shall be moulded of methyl methecrylate conforming to ASTMD 788 or equivalent. With 7 years warranty. Rate shall be inclusive of all taxes, royalty, etc. All T&P /Machine material and labour required for proper completion of work. NOTE : The Composite warranty jointly signed by original manufacturer & authourized converter of at least 7 years shall be furnished on non judicial stamps of required denomination.

Providing and laying of hot applied thermoplastics compound 2.5mm thick including reflecto rising glass beads @250gms. Per sqm. Area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35-2015. The finished surface to be level, uniform and free from streaks and holes. Rates are inclusive of all taxes, royalty, etc. all T&P/machine material and required for proper completion of work.

Providing and laying of Bituminous Macadam 50mm. compacted thick on prepared surface over tack coat with specified graded crushed aggregate for binding course including loading of aggregated with F.E. loader and mixing of stone aggregagtes in hot mix plant, transporting the mix material with tipper and laying mixed material with paver finisher to required level and slope and rolling with power roller to achieve required desnity. Bitumen will be used at the @ 3.30% by weight of the mix material for B.M. including cost of tack coat (@0.20 Kg/sqm)