South Central Railway Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
South Central Railway - SCR Tender
Railway
Civil Works
Ireps
Opening Date27 Aug 2021
Closing Date24 Sep 2021
Tender Amount₹ 12,15,89,905
Costs
EMD
0Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
(1) Macls Indoor & Outdoor Works In Connection With Provision Of Distributed Electronic
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
3567935Tender No
C-SG-C-36-5-160A-2021Tender Authority
South Central Railway ViewPurchaser Address
-Website
http://www.scr.indianrailways.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Advance Correction Slip
BOQ Items
... More
Supply of CLS ladder set complete with staging, supports, signal number plate, cast iron ladder base to suit 3.5 Metre post as per drg.no.SA.23150.S.2033.(Inspection by RITES)
5
3574
17870
... More
Supply of Surface base 140mm dia.post to suit item no. 1 & 2 as per drg.S.2011/M (Inspection by RITES)
63
2370
149310
... More
Supply of offset bracket to suit 140 mm dia CLS post with two nos.of U bolts and nuts complete as per Drg no. S. 23080(Inspection by RITES)
18
3377
60786
... More
Supply of Calling On signal unit complete and 'U' bolts to drawing No. SA.24381 /Adv.(Inspection by RITES)
18
3242
58356
... More
Supply of position light shunt signal ground type complete with base , Pipe, hoods, wire mesh, Number plate lamp holders, terminal block to Drg.No.SA.23840/Adv./Alt.1 - S.23202 (Adv.) Specn. IRS: S.6/81. 08 (Inspection by RITES)
12
4160
49920
... More
Supply of position light shunt signal post type with hoods, number plates,lamp holders, wire mesh, terminal block and offset bracket to suit 90 mm sockets (CLS) with 2 nos. of U bolts and nuts complete to fix calling on signal/shunt signal below main stop signal as per to Drg no. S23840 (Inspection by RITES)
12
2416
28992
... More
Supply of Junction type/Directional type route indicator 1 way to drawing no.SA.23402 with IRS - S 66/84 with amendment-1 or latest (Inspection by RITES)
6
10591
63546
... More
Supply of Junction type/Directional type route indicator 2 way to drawing no.SA.23402 with IRS - S 66/84 with amendment-1 or latest(Inspection by RITES)
9
19110
171990
... More
(SOR No.115)Supply of Colour light signal unit:
-
-
532837
... More
Supply of GKP type Location Boxes Full size as per drg. No. S&T/MFT/2378 (Single).(Inspection by RITES)
174
8960
1559040
... More
Supply of 'E' type locks of different wards as per requirement with key per E- type lock to Drg. No. SA.3376/M/Latest and RDSO Specn. No. IRS. S.30/64.(Inspection by RDSO)
174
560
97440
... More
Supply of relay fixing frame for Full location box, the frame should be made out MS angle of 25mm X 25mm X 3mm and approximate size of 940mm X 150mm with suitable holes to fix the same in the box. (Inspection by Consignee)
174
591
102834
... More
Supply of hylam sheet, resin bonded, 6mm thick, grade P3, to IS specification IS: 2036 of 1974 or latest and size 2400mm X 1200mm of colour approved by the site in-charge(Inspection by Consignee)
7
4821
33747
... More
Supply of hylam sheet, resin bonded, 6mm thick ,grade P3, to IS specification IS: 2036 of 1974 or latest and size 2400mm X 600mm of colour approved by the site in-charge. (Inspection by Consignee)
5
2356
11780
... More
Supply of hylam , resin bonded, 3 mm thick, grade P3, to IS Specification IS: 2036 of 1974 or latest and size 2400mmX600mm of colour approved by site in-charge.(Inspection by Consignee)
3
1289
3867
... More
Supply of ground connections for layout facing point (BG) for 52Kg/60Kg/90 R rail, fitted with universal point machine with 'D' type clamp as per in charge ,SSE/SE's instructions to Drg No S 3361 62 (Inspection by RITES)
35
5835
204225
... More
Supply of insulations for 'D' clamp switch extension bracket to suit to universal point machine as per drawing supplied by the Railways. (One set consists of 'D' clamp insulation - 2 No. Nylon insulation bushes 4 No., Nylon insulation washers - 8 No.). (To be procured from RDSO approved firm).(Inspection by Consignee)
35
496
17360
... More
Supply of drive lug insulation for universal point machine to be procured from RDSO approved firms. (One set consists of one number central insulation plate, bushes - 2 No. and washers - 4 No.)(Inspection by consignee)
35
109
3815
... More
Supply of Track lead junction boxes fiber glass as per Drg.No.CWM-00597of F.R.P material to 22 IRS.S.23 specification along with fixtures i.e., on MS angle 50x50x5mm, 0.9 Meters long two numbers of G.I. pipes of 25mm dia. along with nuts and bolts and 500mm long (this includes gromite bushes, 60mm PBT terminal).(Inspection by RITES)
730
1057
771610
... More
Supply of Wire rope 6/19 steel 6mm dia with fiber core as per specn IS 3459/2004 or latest with PVC sheathing of 2 mm thick type 6 compound IS 5831/1979 or latest(outer dia 10mm.)(Inspection by Consignee)
850
76
64600
... More
Supply of track feed regulating resistance disk type 0 to 30 Ohms as per Drg. No. SA. 20161/66/M 24 or latest. To be procured from RDSO approved firms.(Inspection by RDSO)
87
243
21141
... More
Supply of B type chokes to specification no. IRS-S.65/83 to amendment no.1 or latest.(Inspection by RDSO)
159
1604
255036
... More
(407-02)Supply of low maintenace secondary lead acid cells as per RDSO specification IRS-S- 88/2004 with topping up to frequency up to 6 month. This includes supply of inter cell connector, bolts nuts, acid level indicating floats and vent plugs-2 Volts 80 AH (Inspection by RDSO)
261
2190
571590
... More
Supply of Hydro meter.(Inspection by Consignee)
6
191
1146
... More
Supply of distilled water for topping of secondary cells.( to be supplied at site.) IS 1106 (Inspection by consignee)
1690
7
11830
... More
Supply of AC immunized plug-in-type Style 'QSPA1', DC Neutral line, slow to pickup, 24V, 8F.4B 29 contacts, front and back contacts metal to carbon, complete with plug board, retained clip & connectors conforming to BRS:933A, IRS:S 60, IRS:S 34 & IRS:S 23 (as applicable). The interlocking code for this unit shall be ABDEJ.(with ATC clips)(Inspection by RDSO)
92
4367
401764
... More
Supply of AC immune, plug-in-type, Style 'QTA2' DC Neutral track, 9 ohm, 2F.1B contacts, front 30 and back contacts metal to carbon, complete with plug-board, retaining clip and connectors conforming to BRS: 939A, BRS: 966 (Appendix F2), IRS:S 34 & IRS:S 23 (as applicable). The interlocking code for this unit shall be FGHKX.(with ATC clips)(Inspection by RDSO)
106
3271
346726
... More
Supply of Relay, plug-in type, Style 'AC-LED' All aspects, AC lamp proving relay unit with in-built 31 current transformer type, slow release neutral line relay, 4F.4B contacts, front and back contacts metal to carbon, shall be suitable for working in series with the 110V AC, LED signal lamp Rate (in Rupees)d at 15W confirming to RDSO spec. STS/E/Relays/AC lit LED signal/09-2002, BRS 941A,IRS:s34 & IRS:S23 (as applicable). The interlocking code for this unit shall be ABDHK(with ATC clips).(Inspection by RDSO)
266
4831
1285046
... More
Supply of Fail safe Electronic flasher 24V DC input, 3 amps, as per RDSO Specn. No. RDSO/SPN/173/2002 or latest.(Inspection by consignee)
5
2984
14920
... More
Supply of point contactor relay QBCA-1 AC immunized miniature plug in type DC biased contractor, 33 attractive armature 24Voits DC with 2HF/4B contacts, Heavy duty front contact, contacts metal to carbon complete with plug board, retaining clips and connectors to specification. BRS 943,IRS.S 34,IRS.S 23 as applicable. (Inspection by RDSO)
14
6859
96026
... More
Supply of Relay Non-AC immune, plug-in-type Style 'QN1, DC neutral line, 24V, 8F.8B contacts, 34 front and back contacts metal to carbon with plug board retaining clip and connectors confirming to BRS 930, IRS- S34, IRS-S23 (as applicable). The interlocking code for this unit shall be ABCDF.(with ATC clips) (Inspection by RDSO)
176
2992
526592
... More
Supply of Relay, Non-AC immune plug in type, style QN1, DC neutral line, 24V, 12F.4B contacts, 35 front and back contacts metal to carbon with plug board, retaining clip & connectors conforming to BRS:930, IRS: S 34 & IRS:S 23 (as applicable). The interlocking code for this unit shall be ABCDE.(with ATC clips)(Inspection by RDSO)
156
2930
457080
... More
Supply of Relay AC immune, plug-in-type Style 'QNA1, DC neutral line, 24V, 8F.8B contacts, front 36 and back contacts metal to carbon with plug board retaining clip and connectors confirming to BRS 931A, IRS- S60, IRS-S34 and IRS-S23 (as applicable). The interlocking code for this unit shall be ABDGH.(with ATC clips) (Inspection by RDSO)
258
3173
818634
... More
Supply of Relay AC immune, plug-in-type Style 'QNA1, DC neutral line, 24V, 12F.4B contacts, front 37 and back contacts metal to carbon with plug board retaining clip and connectors confirming to BRS 931A, IRS- S60, IRS-S34 and IRS-S23 (as applicable). The interlocking code for this unit shall be ABDFH.(Inspection by RDSO)
238
3143
748034
... More
Supply of Relay AC immunized, plug in type, style QNA1K, DC neutral line, 24V 1000 ohms, 6F.6B contacts, front contacts metal to carbon and back contacts metal to metal / carbon, complete with plug board, retaining clip and connectors conforming to BRS 931A, IRS S 60, IRS S 34, IRS S 23 and RDSO specification STS/E/Relays/UEA (PI), dated 30-6-97 (Annexure - II) (as applicable). The interlocking code for this unit shall be CDEKY.(with ATC clips)Inspection by RDSO)
100
3178
317800
... More
(SOR No.601)Supply of Relay rack universal type as per drg.no.S&T/MFT/291 with scaffolding, 39 POWDER COATED with stainless steel nuts and bolts for fixing the racks. Supporting angles, frame mounting triangle base with 'J' bolts and insulation of required numbers complete to suit QN1 / K-50 pre wired tag blocks with suitable inner frames.(Inspection by consignee)
-
-
92334
... More
Supply of Cable termination racks size 880mm x 2 Meters made out of 50mmx50mmx6mm thick MS angle with stainless steel nuts and bolts for fixing of the rack with POWDER COATED and drilling suitable 40 holes to suit hylam sheet and relay frames complete as per standard practice with tripod bases and reel insulators (for K rack, P rack and power rack) and with cable ladder of width 400mm and length of 2 Mtr.. The thickness of angle to be 5mm. two angles of 40mmX40mmX5mm to be supplied at both ends and supporting flats of 25mm X5mm.(Inspection by Consignee)
10
5125
51250
... More
Supply of terminal block 1 way PBT 60mm as per RDSO Drg.No. SA.23745/Alt.5 & IRS S.75/91 & IRS.S.23 with latest amendment. (Inspection by RDSO)
2300
61
140300
... More
Supply of terminal block 6 way PBT 25mm as per RDSO Drg.No. SA.23756/Alt.3 & IRS S.75/91 & IRS.S.23 with amendment no.2 or latest. (Inspection by RDSO)
3400
285
969000
... More
Supply of WAGO Terminal as per RDSO Specification No. 189/2004 which consists as per 43 following: a) 2 Conductor disconnect type terminal block as per Model No. 280-870 -- Qty: 6 No. b) End plate type 280-374 suitable for disconnect terminal of Model No.280-870 -- Qty: 1 No. c) End stop terminal block type 249- 117 -- Qty: 2 No.(Inspection by Consignee)
450
486
218700
... More
(SOR No.607)Supply of Non-deteriorating type of fuse holders & fuse links - electric fuse for 44 Railway signalling Rate (in Rupees)d voltage 240 AC/DC to Specn. No. IRS S.78/92 (IRS-S-78/97 Tentative) IS:13703 (part 2/sec2):1993 suitable for E1 fuse 20Amps SC-20 Holder Safe Clip / knife edge type size E1 (R-SS) amp.(Inspection by RDSO)
-
-
172050
... More
Supply o f PVC insulated wire copper conductor 16/02mm to ATC IS:694 to RDSO specification no.IRS.S76/89. Each coil of 100 mts length. To be procured from RDSO approved firms. (Inspection by RDSO) (Per unit= coil 100 mtrs each)
550
797
438350
... More
S u p p l y o f P V C insu la ted wire multi-strand copper conductor 10 Sq.mm flexible Specn.IRS.S76/89.Amendment No.2 or latest. Each coil of 100 mts length. To be procured from RDSO approved firms (size 140/0.3mm) (Inspetion by RDSO) (Per unit= coil 100 Mtrs each)
40
9390
375600
... More
Supply of PVC wire coils of size 28/03 multi strand (flexible). Specn.IRS.S76/89.Amendment No.2 or latest. Each coil of 100 mts length. To be procured from RDSO approved firms. (Inspection by RDSO) (per unit=coil 100 mtrs each)
60
1635
98100
... More
Supply of Battery charger of 230Volts AC / 110V DC 30 Amps single phase, signalling / telecom. Instrument as per RDSO Specn. IRS S.86/2000 Amd.1 or latest.(Inspection by RDSO)
5
74911
374555
... More
Supply of datalogger with 512 digital inputs and 32 analog inputs as per RDSO specification no. IRS:S99/2006 (Amdt-3) or latest to monitor the status of Interface Relays, Analog supplies. This includes transfer of internal data from EI system to External datalogger and supply of protcol converter.(Inspection by RDSO)
4
383224
1532896
... More
Supply of 4 wire leased line modem (2 Nos for each datalogger) to be interfaced with RTU as per instruction of site incharge.(Inspection by Consignee)
2
37845
75690
... More
Supply of VACO earth tester along with tool kits and leather case or similar (Inspection by consignee)
2
4016
8032
... More
Supply of Universal locks with one key for every ten locks. (Inspection by consignee)
230
60
13800
... More
Supply of the following resistors/condensers/diodes. A) Electrolytic condensers 50V 470 mfd.- 20 nos (B) Electrolytic condensers 50V 1000 mfd - 20 No.(C ) Wire wound resistances 100 ohms 10 Watts - 20 No. (D) Diodes - BY 127 - 10 Nos & (E) PVC Insulation tapes of 25 Mtr.-25 No.(Inspection by consignee)
9
2562
23058
... More
Supply of Cement Portland / Ordinary, confirming to ISS: 269/76.(To be supplied at site as per requirement and as per instruction of site engineer) (inspection by consignee)
6
4027
24162
... More
Supply of Condensers 10000 Mfd/50 volts, brands like Philips / Keltron etc.,(Inspection by consignee)
4
324
1296
... More
Supply of Clip on meter MECO 2700 Model or equivalent with similar/better feature. Approval to be obtained (Inspection by consignee)
3
4691
14073
... More
Supply of Office table with plywood plank with thickness of 18mm, teakwood beading with three draws of size 4' X 2' with heavy duty 'S' type chair with hand rest. The above is of Godrej or similar make. (Inspection by consignee)
9
7035
63315
... More
Supply of steel stools 18" height neatly finished and painted. (Inspection by consignee)
11
334
3674
... More
Supply of Jerry can 2 0 Ltrs capacity white a s per the requirement of SI at site.(Inspection by consignee)
10
105
1050
... More
Supply of Navtal Locks godrej make 50mm.(Inspection by consignee)
30
384
11520
... More
Supply of key chains with ring with plastic name plate of 60mmx20mmx3mm duly engraving station name on one side and key particulars on one side as specified by the site incharge.(Inspection by consignee)
80
23
1840
... More
Transparent plastic cover superior quality for keeping circuit diagram sheets with provision for hanging size "C". (Inspection by consignee)
350
40
14000
... More
Supply of Rubber Mat of size 2000mm X 500 mm and 12 mm thickness (Inspection by consignee)
32
819
26208
... More
Printing, Binding & supply of the following registers with latest proforma given by in-charge officer each registr of 100 pages.. (a) Station Asset Register (b) Deficiencies (c) Officer Inspection book (d) Work site orientation classes note book. (e) Station Message book (f) Infringement measure book for signal gears (g) Route 65 cancellation register.(h) Relay room Key register (i) Selection circuit testing (j) Cable testing summary (k)Signal maintenance record.(l) Power Supply systems(Battery maintenance ) (m) Block instrument Maintenance Register. (n) Track circuit maintenance Register.(o) Electrically operated point maintenance Register.(p) Location box maintenance Register.(q) Earth Testing record Register.(r) Joint Inspection of Points and Crossings register.(s) Diesel generator /Solar panel Register.(Inspection by consignee)(Per unit = per register)
120
70
8400
... More
Supply of tool kit as under: (1)Standard Tool Bag (CANAVAS) - 1 No.(2) Soldering Iron (Make 66 "Soldron / Philips) - 75W/230V (to be kept at equipment room) - 1 No (3)Multi meter (Digital PHILIPS/FLUKE/18S Rish B) Upto 20M.ohms 10A, 5KHZ, 2mV to 750V AC, 200V DC -1 No.TRUE RMS METER (4) Screw Driver set of 6 pieces (Taparia Make) - 1 No (5) Cutting plier 6" (Taparia ) - 1 No.(6) Side Cutter (wire cutter) 6" (Taparia ) - 1 No.(7) Nose plier 6" (Taparia) - 1 No. (8) Wire stripper (Taparia ) - 1 No.(9) Fiber tape 3 meters - 1 No (10) Scale 6" (for tongue rail opening) -1 No (S.S.material) (11) Spanner wrench 6mm to 22mm (auto adjustable spanner) Taparia make -1 No(12) Spanner wrench 10 mm to 30 mm (auto adjustable spanner) Taparia make -1 No(13) Spanner wrench 15mm to 41mm (auto adjustable spanner) Taparia make -1 No(14) Hacksaw frame with blade 6", 4" width (for cutting cable) - 1 No.(15) Hammer 3.0 lbs 1 No.(16) Chisel 6" (for cutting bond wire) - 1 No.(17) Poker 8" (for removing bond wire, bond pin )- 1 No.(18) Screw Driver Heavy duty 12" with plastic handle (for opening of detector contacts (Taparia ) - 1No.(19) Test piece (Pt wedge piece) - 2 No.(20) Torch light ( preferable LED rechargeable type) - 1 No.(21) Universal key - 1 No.(22) Box spanner for 6 way terminals (13mm) (for opening ARA terminals) - 1 No.(23) Nylon brush (for cleaning purpose) - 1 No.(24) sealing Plier - 1 No.(25) Crimping Tool (1.5 to 16 Sq.mm) - 1 No.(26) Feeler gauge - 1 Set(27) TSR Meter (for testing condition of track circuit) - 1 No.(28) Wooden Block (60mm x 60mm) (for providing between Tongue rail & Stock rail during maintenance) - 1 No.(29) Track shorting clips - 1 No.(30) Tester - 1 No.(31) Flat file 12" length x 1" width - 1 No. (Inspection by consignee)
2
31434
62868
... More
Supply of DWC pipe of 180 mm outer dia/ 153 mm inner dia in lengts of 6 Mtr with coupler. to IS specification No.14930 Part-II.The IS spec shall be marked on the pipe. (Inspection by RITES)
160
2640
422400
... More
Supply of Electric Key Transmitters single complete to drg.no.SA.22601/Alt-4& IRS S.21/2001 to ward no. specified.(Inspection by RDSO)
18
4767
85806
... More
Supply of double key lock.(Inspection by consignee)
4
303
1212
... More
Supply of Arm type circuit controller 4 way, as per Drg. No. SA.20267 (Adv.).(Inspection by RDSO)
6
3587
21522
... More
Supply of tool kit for Axle counter counter equipment supplied as per manufacturer's specification (Inspection by Consignee)
2
93080
186160
... More
Supply of basic material to construct unit maintenance free earth consisting as per RDSO spec no.RDSO/SPN/197/2008 consisting of : a) copper bonded steel electrode of 3.0m long, 17.0 mm dia with copper 72 bonding thickness mini 250 micron and UL listed and marked--1 no. b)Earth enhancement compound of RDSO approved brand supplied in sealed bags of min 10 Kgs-03 No. c) Copper strip of 150X25x6mm to terminate earth rod-1 d) Copper strip of 300X25x6mm (MEEB)-1 No.e) Copper strip of 150X25x6mm to (SEEB)-1 No.(Inspection by RITES)
90
16837
1515330
... More
Supply of 35 Sq.mm Multi-strand single core PVC insulated copper cable as per IS:694 for connecting Main earth electrode to MEEB in the equipment room in duplicate.(Inspection by RITES)
1350
303
409050
... More
Supply of 16 Sq mm Multi-stand single core PVC Insulated copper cable as per IS:694 for connecting MEEB to SEEB and SPDs and SPDs to MEEB.(Inspection by RITES)
800
144
115200
... More
Supply of lightening and surge arrestors of class B&C suitable for single phase supply in TT network as per amendment 5 of RDSO spec.No.RDSO/SPN/165/2004 or Latest and as recommended by RDSO letter No.STS/E/IPS/GENL dated 27.01.06(Amendment5) (Inspection by consignee)
4
14999
59996
... More
Supply of 'A' type foundation base to IRS Spec S-3029/M Alt 2 (Inspection by consignee)
12
3721
44652
... More
supply of ground lever frame single lever n(Inspection by consignee)
2
5805
11610
... More
supply of straight crank 12"x12" to drg no 58521M (inspection by consignee)
4
2113
8452
... More
Supply of Adjustable crank 12"x18" to drg No SA-3416/M (Inspection by consignee)
2
2175
4350
... More
Supply of solid joint 33mm dia to drg no.SA-6050/M (inspection by consignee)
8
576
4608
... More
Supply of wire adjusting screw 12MM dia to drg no.SA-6065/M (Inspection by consignee)
12
252
3024
... More
Supply of D/W vertical one way.(Inspection by consignee)
2
805
1610
... More
Supply of D/W horizontal 2 way. (Inspection by consignee)
8
1126
9008
... More
Supply of top rollers as per spec IRS S97-2000. (Inspection by consignee)
30
64
1920
... More
Supply of top rollers pins to suit above (inspection by consignee)
30
28
840
... More
Supply of rollers trestle 2 way as per drg.no.S 3534/M (Inspection by consignee)
20
438
8760
... More
Roller stand (Inspection by consignee)
30
160
4800
... More
Supply of BOTTOM rollers as per Drg no.S-3539/m (Inspection by consignee)
30
118
3540
... More
Supply of D.W.pulley stake as per Drg no.S-3065/m (Inspection by consignee)
10
304
3040
... More
Supply of D.W.pulley as per Drg no.S-3051/m (Inspection by consignee)
10
235
2350
... More
Supply of D.W.pulley supporting bracket as per Drg no.S-7383/m (Inspection by consignee)
10
159
1590
... More
Supply of aluminum lugs 25 Sqmm of reputed make (Inspection by consignee)
910
17
15470
... More
Supply of copper lugs10 Sqmm of reputed make (Inspection by consignee)
910
8
7280
... More
Supply of Corium Z 105 Battery cleaner and terminal conditioner of 500ml tin can (Inspection by consignee)
24
3507
84168
... More
Supply of Copper eyelets to suit 16/0.2 wire Dowell's make (Inspection by consignee)
3160
2
6320
... More
Supply of LED holders with LED's of size 5 mm with 0.5 Watt resistance, to be supplied as per requirement of site in-charge. (Inspection by consignee)
200
12
2400
... More
Supply of Solid State Buzzers with different frequencies in metallic/plastic casing working on 12V- 24V-60 Volts. (Inspection by consignee)
24
204
4896
... More
Final location survey of cable route and final preparation of cable route plan as per technical specification.(Per Unit=RKM)
32
994
31808
... More
Excavation of trench to a depth of 1200mm and width of 300m at bottom in all types of soil(Normal 2 soil/soft soil/sandy soil except in hard morum / rocky soils /bridges/ level crossings/ track crossings/ coil pits, ) as per RDSO Sketch no SDO/CABLE LAYING /003 including marking of cable alignment, clearing of jungle, bushes, trial pits if required, refilling with excavated soil, ramming and consolidation after laying of cables complete to the finished item of work as directed by supervisor in-charge.(Per Unit=RKM).
19
51912
986328
... More
Excavation of trench to a depth of 1200mm and width of 300m at bottom in hard morum soil as per 3 RDSO Sketch no SDO/CABLE LAYING /003 including marking of cable alignment, clearing of jungle, bushes, trial pits if required, refilling with excavated soil, ramming and consolidation after laying of cables complete to the finished item of work as directed by supervisor in-charge.(Per Unit=RKM).
14
67092
939288
... More
Cutting of rock to a depth of 300 mm and width of 300 mm where rock is visible from surface concreting 200mmx200mm after laying of cable with 1 cement: 2 sand : 4 graded stone aggregate 20mm nominal 4 size and curing of concrete to the required number of days, except in bridges, culverts, level crossings, track crossings, cable pits, rocky soil including marking of cable alignment, clearing of debris etc., complete to the finished item of work as directed by site in-charge. Drg No.SK/CN/NEW/1. All the material is to be arranged by contractor.(Per Unit=RMT)
1350
460
621000
... More
(SOR No.1905-01) Cutting of rock to a depth of 200 mm and width of 200 mm where rock is visible from surface to a depth more than 300 mm up to 550mm, excavation of trench with width 300mm above rock 5 concreting 200mmx200mm after laying of cable with 1 cement: 2 sand : 4 graded stone aggregate 20mm nominal size and curing of concrete to the required number of days, refilling with excavated soil ramming and consolidation except in bridges, culverts, level crossings, track crossings, cable pits, rocky soil including marking of cable alignment, clearing of debris etc., complete to the finished item of work as directed by site in-charge. Drg No.SK/CN/NEW/3. All the material is to be arranged by contractor.(Per Unit=RMT)
2300
241
554300
... More
(SOR No.1905-02)When rock is visible for more than 0.5 metre and up to 0.8 metre from the ground level, excavating the trench minimum 0.5 metre and maximum 0.8 mettre, laying of cable and concreting 200 mm x 200 mm over the rocky surface after levelling with soil/sand.(Per Unit=RMT)
2600
200
520000
... More
Digging of cable trench to a depth of not less than 30 Cms in rocky terrain, Concreting the trench with 150mm thick concrete with 1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size. All the material is to be arranged by contractor.(Per Unit=RMT)
4500
128
576000
... More
Track crossing by horizontal boring method based on the Drg. No. SK/SC/CN/WEST/30/87 8 (enclosed) and as advised by the engineer at site. This includes the supply and insertion(pushing) of GI pipe (80mm) confirming to IS.1239 heavy class in the bore drilled with the coupler between two pipes. All the joints of casing pipes should be tight and leak proof.(Per Unit=RMT)
1800
1403
2525400
... More
Trenching under Rails for crossing the track(Track crossing) and refilling of trenches as per RDSO drawing No.SDO/CABLE LAYING /009. The track crossing shall be done at right angles. The depth of cable trench 9 shall be 1.2 Mtr. below the rail flange. The depth between top cable and the level of rail flange of the rail shall never be less than 1.0 Mtr.. The ballast shall be Stored separately while making the trench and the earth soil shall be stored separately. while re-filling the trench, the earth soil has to be filled first to the ground level and the ballast has to be properly put in the track. this work has to be done under supervision of S&T Representative and Representative of P.Way.(Per Unit=RMT)
2400
141
338400
... More
Breaking of metal/ tar road and refilling after laying the cables as per drawing no.SDO/CABLE LAYING/010. The surface of the road shall be concreted to match with the old surface.(Per Unit=RMT)
900
142
127800
... More
Laying different type cables in the trench. Termination covered elsewhere.(Per Unit=RMT)
250000
5
1250000
... More
Excavation of square coil pit up to a depth of 1 Mtr. X 1.5 Mtr. For providing coil at location box, point, signals etc., This includes back filling and ramming of trench / pit after laying the cable and consolidation of soil.
245
181
44345
... More
(SOR No.1915-01)Cable laying at culverts/bridges -High flood level : Excavation of cable trench of 300mm width and 800 mm depth in the ramp from the foot of the culvert on to the top of the culvert by storing the ballast and the excavated soil separately and laying of HDPE pipe( to be supplied by Railways) duly. The pipe is to 13 be laid , the cables required are to be drawn using bends( to be supplied by Railways) as per the drawing No.SK.15/11. After drawing the cables the bends are to be concreted to a size of 300mmX1000mmX1000mm using required shuttering /moulds. Except the HDPE pipe and bends, all other material is to be arranged by the contractor. (a)Trenching across the drain bed to a depth of 1.2 Mtr.,30cm width in all types of soil, laying of DWC/GI/RCC pipes ( to be supplied by Railways) and refilling with excavated soil, ramming and consolidation after 5 days .i.e on completion of the work of SOR No.1915-02 .(Per Unit=RMT)
700
74
51800
... More
(SOR No.1916-01) Excavation of trench at the culvert from foot of the culvert to top of it in the ramp 14 to a size of 300mm width , 800mm depth by storing the ballast and the excavated soil separately, laying of the HDPE/DWC pipe using couplers and bends as per drawing No.SK.15/11, drawing of cables through the pipe and refilling of the trench duly putting back the removed ballast in its proper place and shape.(Per Unit=RMT)
80
80
6400
... More
(SOR No.1916-02)Concreting of portion of the pipe at the bend near the culvert as per the drawing SK.15/11.(Per Unit=Per bend)
32
1216
38912
... More
Supply & Laying of G.I Pipes 50mm dia. medium quality to specification IS.1239 (part-I) 1990 and 16 galvanised to specification IS.4736-1986 On bridges , culverts, trench with channel ramps on either end of the culvert/bridges. Clamping arrangement with MS brackets for fixing of GI pipes on bridges/culverts, small holes of 5mm are to be drilled on the pipe before laying of the pipes. (Inspection by Consignee)(Per Unit=RMT)
390
254
99060
... More
Supply & Laying of G.I Pipes 100mm dia. medium quality to specification IS.1239 (part-I) 1990 and 17 galvanised to specification IS.4736-1986 On bridges , culverts, trench with channel ramps on either end of the culvert/bridges. Clamping arrangement with MS brackets for fixing of GI pipes on bridges/culverts, small holes of 5mm are to be drilled on the pipe before laying of the pipes. (Inspection by Consignee)(Per Unit=RMT)
630
341
214830
... More
(SOR No.1923) Provision and laying in position cement concrete of 1 cement:3 sand:6 graded stone aggregate of 20mm normal size excluding cost of cement, centering and shuttering ( including transportation of all the material) .
-
-
58785.04
... More
Jungle cutting along with the cable route.(Per Unit=RMT)
19000
4
76000
... More
Test lamp arrangement in LBs/RE cuttings.(Auto mobile handle type) (Per Unit=Per location)
172
119
20468
... More
Supply and fixing of H. Wood planks of 40mm thick and not less than 200 mm width with smooth surface, painting (Hardwood, paints, fixing bolts are to be arranged by contractor). Per
2
18673
37346
... More
Numbering location box as per standard practice and writing all termination particulars inside the location box as per details. This includes all main and tail cable particulars, writing of cable numbering of cables, polishing teak wood boards in two coats and painting hard wood shelves in two coats of black enamel.
214
280
59920
... More
Fixing relay bases, wiring in location boxes, bunching, fixing of relays as per circuit diagram. This includes fixing of condensers, resistance, 6 way / 1 way terminals/ WAGO, ND type fuses, LED indicators for fuses as per type fuses, LED indicators for fuses.
700
156
109200
... More
Earthing and soldering of cable armour.(Per Unit=Per cable)
2280
21
47880
... More
1.Installation of single earth(maintenance free) including the following:- welding and fixing of copper tape (used as bus bar) welding of cadmium bronze cable to copper plate using material supplied vide item no. 1,2 of SPD of Sch-A . All the material supplied for mounting of copper tape, exothermic weld materials, tools and fixtures for welding copper tapes shall be arranged by contractor. a. Digging /Auguring/Boring of single earth pit of 100mm to 125 mm dia to the depth of approx. 2.8 meter. b. Insertion of 3.0 meter electrode and penetrating it at least .2 meter by pushing gently with sledge hammer where the natural soil is assumed. c. Filling of earth pit with earth enhancement compound (EEC) in slurry from and backfilling. d. Carrying out exothermic weld connection on 26 single earth electrode to a copper tape of 150X25X6mm. e. Carrying out exothermic weld connection on the copper tape of 150X25X6mm on earth electrode for connecting two 35 Sq mm cables for redundancy.. f. The exothermic welding material for bonding the earth system shall be procured from RDSO approved firms, which includes graphite moulds, clamps, weld metal powders. g. Digging a trench to a depth of at least 0 .5 Mtr. and run the two 35 Sq mm earth conductor ( procured against supply item) from earth pit to MEEB. h. Routing and termination of two 35 sq mm earth conductors in trench from earth pit to 300X25X6mm MEEB, which is to be fixed inside the equipment room with two insulation studs. i. 300X300X300 mm (inside dimension) concrete earth pit with a concrete lid, approx 50mm thick with pulling hooks, shall be provided to cover the pit. Back side of the cover will be painted in black and dare of the testing and average resistance value shall be written.
125
4276
534500
... More
2. Routing and connecting of all the SPDs in the equipment room to MEEB with 16 sq mm copper cable using copper lugs with stainless steel nut and bolts (for item procured against supply).(Per Unit=RMT)
3390
23
77970
... More
(SOR No.2205-04) Supply and fixing of wire mesh for the following signals, duly painted with black enamel in two coats. (A) Box type mesh for ground type shunt signal
13
484
6292
... More
Strengthening of foundations of signals, Full/Half location boxes, by carrying out the earth work around the foundation, ramming of the earth, caring out masonry work from bottom of earth work using country stones and cement masonry to prevent the earth from slipping down the bank.
200
2813
562600
... More
Fixing of point machines on PSC/Wooden sleepers as per standard drawing. Wiring as per circuitry includes fixing & wiring of point contactor unit frames and controlling relays . Includes fixing of crank handle ward plate.
42
4308
180936
... More
Wiring of Track circuits feed end, relay end complete with TLDs, batter-ies, chargers, track relays, 31 double lead wires, providing insulation etc,. connected with track commissioning of track circuit including provision of bracket for TLD covers and painting. Anti-tilting arrangement has to be done for track relays, chargers & batteries.
87
1004
87348
... More
Execution (Supply , transportation, installation and commissioning) of pin brazing /exothermic out 32 weld connection for continuity bond across fish plates in DC track circuit area as per RDSO Spec. No.IRS S- 103/2004 or latest. (all equipments & material required for brazing /welding of railhead continuity will be arranged by the contractor (Inspection by consignee)(Per Unit=Per bond)
350
725
253750
... More
Execution (Supply , transportation,installation and commissioning) of pin brazing /exothermic out 33 weld connection for TLJB/boot leg as per RDSO Spec. No.IRS S-103/2004 or latest. This includes good quality insulated cable for TLJB for the above purpose. one end on rails web in track circuit area and terminating the other end of wire on the terminals in the TLJBs, (all the equipments and materials required for welding will be arranged by the contractor.(Inspection by consignee)(Per Unit=Per bond)
420
365
153300
... More
Drilling of holes 7.2mm on web of the rail , providing bond wires with PVC coated wire rope. (Bond pins single groove, drilling machine and drill bits has to be supplied by contractor - Wire rope for bonding is covered under supply portion ).(Per Unit=Per Rail Joint)
3760
16
60160
... More
Fabrication, Supply and fixing of CALLING ON instruction boards, STOP boards with engineering 35 grade reflective sticker of size 600X900X1200 mm GI sheet, with MS angle of 75X75X6 mm with 6 meter length including paint, excavation of pit and concrete foundation etc..as per the instructions of sight in-charge. All necessary materials to be arranged by the contractor).
9
3549
31941
... More
Installation and wiring of token/token-less block Instrument in ASM's room with suitable foundation including fixing of LD's, terminals, fuses &earth connections. All ancillary works included. (Per Unit=Per instrument)
4
2789
11156
... More
Providing crank handle box, wiring, testing as per technical specification including concealed wiring in the wall .
13
3848
50024
... More
Fixing of PVC pipes & bends, drawing of required wires through the same up to functions like 38 control telephone, Dy.control telephone, magneto phones inside SM's office as per circuit diagram. This includes supply and fixing of required DPDT and rotary switches, PVC pipes and bends 25mm dia with 2mm wall thickness, Lightening dischargers and painting of particulars.
2
3628
7256
... More
Fabrication, supply and fixing aluminium ladder of size 25 X 25 X 5mm, 200mm width, arrangements for drawing various wires in the battery, equipment and relay rooms.(Per Unit=RMT)
90
472
42480
... More
Installation, testing and commissioning of Data Logger which includes the software configuration 40 needed, validation, taking test print, for networking for transferring the data to nominated location for monitoring and changing of EPROMS if any as per the instructions of the site in-charge, including alterations data base in Hq/SSE offices where ever required.
4
24280
97120
... More
Erection of Relay rack 1way / 2way / 4way with scaffolding suitably concreting tri-pod bases using J- 41 bolts, fixing rack supporting of size 50x50x6 mm on to the wall. Reel insulators are to be provided for insulating the rack from the scaffolding & tri-pod bases. ( payment based on number of equivalent 1 way relay racks).(Per Unit=Per one way rack)
8
341
2728
... More
Fixing relay bases on the relay frames erected in Relay Room, Wiring of all types of relays by drawing various sizes of wires/multicore cable, fixing fuses, condensers, resistances, LEDs etc and wiring duly soldering the same as per approved circuit diagram, testing point to point before soldering and after soldering, bunching and lacing as per detailed technical specification. Different colour codes and sizes of wire to be used as per standard practice. This also includes, provision of all PVC sleeves required to be provided. Copper lugs to suit 43 to 16/02 wire and neat bunching, lacing with Modi Nylon / Twine thread and using PVC dotted tape with buttons were required. This also includes soldering all the wires in the relay room with Rosine core of IS Spec 1921 (60 % Tin and 40 % Led). Soldering should be done as per standard practice. This also includes inserting the clips, point to point testing as per the circuit diagram and plugging relays to Relay bases (except Inter-cables, relays other materials such as Rosine core, flux, nylon thread. PVC dotted tape should be supplied by the contractor). Point to point testing should be done in the presence of Engineer-in-charge as instructed in two stages, one before soldering and the other after soldering.
440
174
76560
... More
(SOR No.2615) Fixing of the following on pre-erected relay racks.
-
-
4324
... More
Preparation of Contact Analysis for 'Q' style relays as per detailed technical specification.
320
14
4480
... More
Installation, testing and commissioning of Data Logger/ RTU which includes the software configuration needed for networking for transferring the data to nominated location for monitoring as per the instructions of the site in-charge.
3
15744
47232
... More
Provision of one skilled and 2 unskilled staff round the clock to attend to teething trouble of the installation along with SI/CSI after the installation has been brought into commissioning. The work includes routine maintenance, failure restoration as per the direction of the SI/CSI.
4
43437
173748
... More
Fabrication, fixing of required configuration of key in point machine for grouping of crank handle of point machines.
40
82
3280
... More
Carry out non-interlocking arrangements for way stations by fixing and wiring QNI relays for NI working. Supply & fixing of LED 10mm for signal indications on plywood/decolum sheet painted with station diagram
2
12300
24600
... More
(SOR No.2701-02)Transportation of materials from any Stores to Site and vice-versa including loading and unloading. (A) Lead above 50 Kms (Per Unit=PTPK)
340000
4
1632000
... More
(SOR No.2802-02)Initial Charging of Secondary Cells:- (A) 2 volts 80 AH
261
220
57420
... More
Supply and fixing of 'AHUJA' make horn type loud speaker 15W 8 ohms impedance
6
937
5622
... More
Supply and installation of Electronic Flasher unit operating on 230V/110V AC, 110V DC able to drive 2 No of flasher lights
3
1713
5139
... More
Supply and fixing of Electronic Hooter unit 24/110 DC of approved design /make able to drive 2 no. of speakers of 8 ohms 15W
6
1820
10920
... More
Painting of gate protection diagram.
3
280
840
... More
Concreting foundation for Pedastal Mechanical lifting barrier as per Drg No. SK/SC/CN/33/85. ( all materials viz. cement, metal stone, sand and foundation bolts are supplied by the contractor)
6
4350
26100
... More
Excavation of a pit and concreting foundation for 2 No of lifting barrier gate meeting posts, using anchor bolts of size 20 x 450 mm as per technical specification. (all materials except cement are to be supplied by the contractor).
3
1216
3648
... More
Excavation of pit and casting foundation for one lever frame with cement concrete in the proportion of 1:2:3 with approx 40 mm graded stone and river sand using 4 nos of 18/34 bolts
3
2346
7038
... More
Excavation of a pit and concreting foundation for 1 No of lifting barrier gate winch, using anchor bolts of size 20 x 450 mm with concrete ratio of 1:3:6. (all materials except cement are to be supplied by the contractor)
3
1373
4119
... More
Assembling and erection of complete lifting barrier 2 No. pedastal 1 winch, 2 boom stops complete wire transmission and testing. This includes turnout wheel foundation etc. ( Cement will be supplied by Railways).
3
5902
17706
... More
Carrying out lifting barrier boom locking arrangements complete with foundations, fixing of lever 61 frame etc., Excavation of pit at a given location, concreting the foundation for the single lever frame as per Drg. SC/W/CN/65. ( This includes provision of winch handle locking arrangement by cutting suitable groove on the pinion end suitably expending the 'E' type lock plunger, triple lock arrangement and connecting rodding to GF and boom locking mechanism, testing and commissioning . (Cement will be supplied by Railways.)
3
5700
17100
... More
Assembling of roller trestles 2/4 way with roller stands, bottom and top roller, MS pin for top roller, split pin. Excavation of pit to suit 2/4 way trestle placing it at intervals of not more than 2 meters. Filling u earth after leeping trestles in the pit.
28
106
2968
... More
Foundation and fixing of Diversion wheels/cranks as per technical specification
11
488
5368
... More
Laying of point rodding 33mm dia on the roller trestle already fixed coupling the rods together levelling aligning. Twist/bends in the point rodding is to be removed and rods straightened by the contractor before laying on trestles. All the materials except bolts and nuts and the tools will be supplied by Railways.(Per Unit=RMT)
52
12
624
... More
Fixing and wiring RKT/EKT for siding for LC Gate interlocking as per technical specification. This includes installation of Magneto phones at location, gate and SM's office
13
602
7826
... More
Supply of paint black enamel of approved quality and painting of cranks/GF in 2 coats. Painting the function number on the arm with white enamel paint ( 40mm letters) and brush for the work are to be arranged by the contractor
21
63
1323
... More
Supply of paint of approved quality and painting of point rodding already run on trestles , using paint 67 red oxide in 2 coats leaving 300mm on either side of top roller on trestles, the connecing rod to be crank/compensator is to be painted for a length of 600mm from it using paint black enamel in 2 coats. All the materials are to be supplied by the contractor.
52
6
312
... More
Forge welding of point rodding 33mm dia with smooth finish of surface after taking measurements and connecting the welded rod and either end to coupling end/ junction/crank. All material such as coal is to be arranged by the contractor.(Per unit= Per weld)
21
105
2205
... More
Fabrication and supply of GI termination box for point machine of size 45cm x 23cm x 12 cm, the termination box to be fabricated out of GI sheet 10SWG. The termination box to be provided with 2 nos of M.S. 69 angle of size 50x50x6mm of length 1000mm each and GI pipe of 40 mm dia and length of 450mm. The termination box is also provided with teak wood plank of size 25 mm thicknesses for fixing of terminals. Necessary bolts, nuts and screws are to be provided for fabrication of termination box. The termination box is to be painted double coat with approved quality of paint black enamel on to the outside and to be painted with white enamel in to inside of the box (All materials are to be procured by the contractor).
45
2579
116055
... More
Releasing of the following equipments without causing damage, stacking neatly at a centralised place near the site of work as shown by the in charge, and handing over the same to the Stores depot as per the inventory made. a. Releasing of location boxes Full/Half/sheet iron.
57
148
8436
... More
b. Releasing of Warning Boards/stop boards
10
252
2520
... More
c.Releasing of Pully stakes single/double wire.
8
19
152
... More
d.Releasing of block counter
5
306
1530
... More
e.Releasing of block instrument
5
307
1535
... More
f.Releasing of Ground lever frames.
3
203
609
... More
e.Releasing of Cranks / Compensators.
6
24
144
... More
g.Releasing of lifting barrier gate.
6
665
3990
... More
h.Releasing of colour light signal 1/2/3/4 way complete.
32
532
17024
... More
i.Releasing of shunt signals ground type complete.
5
141
705
... More
j.Electrical point equipment complete.
10
213
2130
... More
k.Releasing of complete equipments and materials in battery, equipment rooms, relay rooms and SM's office.
4
2577
10308
... More
l.Releasing rodding(Per Unit=RMT)
26
1
26
... More
(SOR No.3306-06)Arranging rexin cloth bound booklets and binding for large size drawings.(Per Unit=Each booklet) Per
15
174
2610
... More
Carrying out circuit alterations in the existing location boxes as per the new circuits which require excavation and releasing unwanted cables from the location box and taking new cables inside the location, clamping of new cables, filling the location box with standard up to the bottom of location and plastering.
48
612
29376
... More
Installation of 2 wire DTMF Selective Calling Telephone with power supply.
9
622
5598
... More
Straight through / derivation with/without transformer joints: Installation Thermo shrinkable jointing kits for straight through / derivation joints for LC gate, pump houses etc where VF transformers are not required 87 and derivatin joint by using 2T trasformer ( to be housed in the joint) . This includes tapping of nominated Quad at a specific location shown by the Railway Engineer at site to the jelly field cable already laid. All material including valco tapes except thermo shrinkable jointing kit shall be supplied by the contractor. (Refer Annexure for instructions on cable jointing).(Per Unit=Joint)
72
979
70488
... More
Supply and fixing of 20 pair CT box and termination of jelly filled cable as per details given by engineer at site for LC gates / Pump house. The CT box after termination shall be sealed by pouring Paraffin wax ( Inspected by Consignee). (Per Unit=Per location)
7
1874
13118
... More
Supply& installation of Rack 19" wall mount 6U/500MM D with front glass door and lock and key including the following: ( Inspected by Consignee).1U cable manager - 1 ,1U Cantilever tray - 1 No. AC distribution box 5X5 amps - 1 No. Front panel H/W PKT of 10 Sets - 1No.
5
5356
26780
... More
Fabrication, installation and fixing of emergency socket post, box and emergency socket as per the drawing No. OHE/1.6A/94 (enclosed). These emergency socket posts to be fixed along with the cable route at an interval of not more than 1 Km. As per the drg ( Inspected by Consignee).
26
1469
38194
... More
Supply and installation of rack mounted 24F FMS fiber part no.fms-1u 24FS 24FP Raychem make including 24Nos 0.2db FC/PC adaptors and 24numbers 900 micron 1.5 meter FCPC pigtails. RDSO Spec No.: 91 RDSO/ SPN/TC-037-2000 (Ver.3) or latest.
8
16285
130280
... More
Any other SOR items from Chapter 19 to 36.
1
200000
200000
... More
Supply of Tag block 200 way to RDSO Spec. No. IRS.S.77/2006 (Rev.1) of Drg. No.SA.24751 ( Inspection by consignee)
10
1000
10000
... More
Supply of Junction type/Directional type route indicator 3 way with mounting socket to drawing no.SA.23401 with IRS - S 66/84 with amendment-1 or latest( Inspection by RITE)
4
17732
70928
... More
Supply of CLS Multi unit type 4 aspect complete with mounting socket to Drg. No. SA. 23002/A/M with latest amendment and IRS S 26/64.(Inspection by RITES)
10
12584
125840
... More
Wago Connector FTB set ( Fused terminal block)(Inspection by consignee)(Per Unit = Per Location)
20
2000
40000
... More
Wago connector UFTBI set ( Un-fused terminal block)(Inspection by consignee) ( Per Unit = Per Location
20
1800
36000
... More
Wago connector end plate set ( End clamp)(Inspection by consignee)(Per Unit = Per Location)
20
1300
26000
... More
Din Rail (Inspection by consignee) (Per Unit = Per Location )
20
350
7000
... More
Truff (Inspection by consignee) (Per Unit = Per Location)
20
250
5000
... More
Supply of following items for stations
-
-
271192
... More
Supply of Track feed battery charger to work on 110V AC for charging 1 or 2 or 3 or 4 lead acid cell of 80AH (10 Amps) used in track circuit as per RDSO Specn. No. IRS.S.89/2013 Ver. 1.0 latest.(Inspection by RDSO)
87
5775
502425
... More
Track bonding diagram on non-transparent acrylic sheet of thickness 4mm with alumunium beading and hanging support with screen printing, lettering and bonding diagram.(Per Unit = per yard/per station)
4
6500
26000
... More
Station working order diagram on non-transparent acrylic sheet of thickness 4mm with alumunium beading and hanging support with screen printing, lettering and yard diagram.(Inspection by consignee) (Per Unit= per yard/per station)
2
6500
13000
... More
Fabrication, supply, and designing of situation requiring disconnection noticw/consent/ no consent board of size 36"x24". (details of board required to be collected from site incharge)(Inspection by consignee)
2
3400
6800
... More
Manufacture and supply of Laiminated boards of size 45 cm X 60 cm X 12mm thick for the following: 1. Battery care board - 1 No. 2. Guide lines for power supply arrangements - 1 No ( Inspection by consignee)(Per Unit = Per Board
4
2025
8100
... More
Manufacture and supply of Laiminated boards of size 45 cm X 60 cm X 12mm thick for the following: 1. Relay room maintenance board - 1 No. 2 Gaspel truth for signalmen board (1 no. in Telgu and 1 no. in English)(Inspection by consignee) (Per Unit = Per Board)
4
1350
5400
... More
Supply of rodometer(Inspection by consignee)
2
2940
5880
... More
Wire wound resistors, 2.2 ohms/50watts(Inspection by consignee)
101
84
8484
... More
Supply of Vitreous enamel coating board each of size of 230mm dia (A, P, G, C, IB markers) made out of 2mm sheet as per following colour scheme.(a) Supply of 'G' marker yellow background, black letters. (b) Supply of other boards: white background black letters.(Inspection by consignee)
20
191
3820
... More
Supply of Automatic Changeover CLS Panel outdoor type, 150A suitable for 3 supply, 230Volts, 19 single phase, 50Hz AC power supply confirming to RDSO's Specn No.TI/SPC/PSI/CLS/0020. (suitable for 25KVA AT) or latest. Latest RDSO Specification no.TI/SPC/PSI/CLS/0020 with A & C slip 1 to 4. ASCOS/25KVA/CORE/2007/01Rev.01 Inspection by Consignee
1
154875
154875
... More
Supply of Dot Matrix Printer EPSON LQ 300/LX300, 18 column, with serial port.(INSPECTION BY CONSIGNEE)
4
9000
36000
... More
Supply of Automatic media change over of modems working in redundant channels for data transmission on OFC/ quad(Inspection by consignee)
10
13617
136170
... More
Supply of OFC integrated access device 1U height or 1.5U height/ 19" rack mountable for LVCD/Digital axle Counter purpose: Optical module integrated in the unit supporting dual core OFC and one 100Mbps Ethernet port for survillance / smoke detector; optical distance support to be 20Kms; unit to support one 22 E&M module supporting four 2W/4W (each pport configurable ) to support Axle Counter/ UFSBI / Control Phone / EC / RTU; and one TELNET/SNMP port; unit to support DC/AC power supply; unit to support change over mechanism between quad and optical fiber for E&M interface option ; one number cable to be provided along with unit for E&M ; FABIO /2CX/ OFC /DC & mOFULE 2W/4W four port: Make : TEAM ENGG / FABIO / WAVES or similar / TANSY (Inspection by RITES)
20
165200
3304000
... More
Printer for Maintenance terminal at Station. HP 1020 Laserjet or similar (Inspection by Consignee)
2
10797
21594
... More
Supply and fixing of Fire Extinguisher CO2 type (Capacity 5 KG)(Inspection by consignee)
6
8840
53040
... More
Supply of Cable & pipe locator with Alkaline battery, Tx-1 with Alkaline battery, 4 inch (100mm) Tx clamp Direct connection lead, 10 mtr extension cable earth stake, magnet, soft bag( Model No. RD7100DL or latest of Radio Detection make or better (inspection by consignee)
2
302428
604856
... More
Supply of tips to ASM on panel/VDU opearation of size 16"x18" in fibre sheet of 4 mm thickness with glassy lamination(Inspection by consignee)
2
1627
3255
... More
Supply of Fibre boards of 'Alter the points immediately on arrival of the train as per GR:3.38 (2)' in bilingual i.e., in Hindi and English of size 4.5" X 12" (Inspection by consignee)
1
281
281
... More
Supply of thick Kodak photo paper with lamination of various sizes with different lettering and lauguages in required size as per the instructions of site incharge. Proportionate payment to the size of boards. (Inspection by consignee)
100
3850
385000
... More
Supply of Vitreous enamel coating board each of size 280mm X 102mm made out of 2mm thick sheet (signal number plate) with white backgroud, black letters as per technical specifications.(Inspection by consignee)
48
98
4704
... More
Supply and providing of Polymeric Positive Temperature Co-Efficient Device self reseting type (PPTC) suitable for Railway Applications-1.1.A.9 (Inspection by consignee)
600
59
35880
... More
Earth Leakage detector 12 channels as per RDSO Specn. No. RDSO/SPN/256/2002 with latest 31 amendment including - 1) Mounting stand for ELD and 2 fuse board to isolate from distribution board, for the following requirement of channels:. 24V/60V DC - 1 to 4 channels 110V DC - 5 to 8 channels 110V AC - 9 to 12 channels (Inspection by RDSO for RDSO inspected items and others by consignee)
4
133187
532748
... More
6 pin emergency socket as per RDSO specification IRS TC 42/87 Amendment3 or latest. (Inspection by consignee)
35
315
11025
... More
Emergency socket box as per RDSO drg no. TCA-20060(ADV)(Inspection by consignee)
15
735
11025
... More
Supply of relay fixing frame for Half location box, the frame should be made out MS angle of 25mm X 25mm X 3mm and approximate size of 470mm X 150mm with suitable holes to fix the same in the box. (Inspection by consignee)
12
65
780
... More
Supply of RTU with 128 digital & 16 analog inputs as per RDSO Spec No.IRS-S-99/2006 or latest. (Inspection By RDSO)
3
231875
695625
... More
Supply of external modem for RTU(Inspection by consignee)
2
12000
24000
... More
Supply of T-networking modem for RTU connectivity(Inspection by consignee)
3
35000
105000
... More
Supply of Dual Card leased line MODEM for RTU(inspection by consignee)
4
24000
96000
... More
LVR Transformers rectifiers 230/24/1Amps (Inspection by consignee)
16
1000
16000
... More
V.F Tapping and termination transformer as per RDSO specification No.IRS-TC 22/76 latest 1.2 ( 50HZ signalling transformer)(Inspection by consignee)
8
840
6720
... More
Supply of Single post Telephone Master and Slave Unit of Tummala Electronics Make(Inspection by consignee)
10
6633
66330
... More
Supply of Alcosign felt notice board of size 4' X 3' with glassy fibre doors having locking arrangements.(Inspection by consignee)
4
6450
25800
... More
Supply of Fibre boards of 'Alter the points immediately on arrival of the train as per GR:3.38 (2)' in bilingual i.e., in Hindi and English of size 4.5" X 12" (Inspection by consignee)
2
1627
3255
... More
Provision of Security Guards round the clock beat from Up Home Signal to Down Home Signal to avoid theft of signalling amenities in 12 hour shift.(Per Unit = Per 12 Hrs)
1020
434
442680
... More
Excavation of pit, casting concrete foundation and erection of apparatus case full size as per Drg. No. SK/CN/1/89/A/1 and fixing of 1 No.of 'E' type lock for the front door, fixing of one hylam sheet of 1000mm X 2 940mm X 10mm thickness and painting the apparatus case inside and outside with one coat of redoxide and two coats of aluminium paints (foundation bolts and nuts,' E' type lock, cement, river sand, stone jelly of size 20/20mm, hylam sheet of size 1000mm X 940mm X 10mm, paints, varnish, fixing bolts and nuts and all other miscellaneous material required for the work shall be supplied by the contractor).
174
9875
1718302.2
... More
Excavation of pit, casting concrete foundation and erection of apparatus case half size as per Drg. No.SK/CN/1/89/B/1, fixing one 'E' type lock for the front door and latching arrangements for the back door and 3 fixing of one hard wood shelf plank 37mm thick and painting the apparatus case inside and outside with one coat of redoxide and two coats of aluminium paints (foundation bolts and nuts, E type locks, cement, river sand, stone jelly of size 20/20mm, hardwood plank of 37mm thick, paints, varnish, fixing bolts and nuts and all other miscellaneous material required for the work shall be supplied by the contractor).
64
6966
445862.4
... More
Excavation of pit, casting concrete foundation as per Drg. No. SC/N/CN@47>47@A/1 using metallic 4 templates, for erection of Colour light Signals upto 4 aspects (foundation bolts, cement, river sand, stone jelly of size 20/20mm dia and all other miscellaneous materials required for the work shall be supplied by the contractor).
77
5008
385631.4
... More
Erection of surface base, signal pole, mounting of Colour Light Signal upto 4 aspects complete on signal pole / offset bracket, (for LED / filament bulbs) with lenses, triple lamp holder, filament switching units, CLS transformers, current regulators (whichever is applicable), fixing of ladder with platform complete and concreting of ladder shoe, fixing of number plates, marker board, lenses guard, fixing of speed Limit board, whichever is necessary, termination tail cables, wiring of signal unit, provision of EWS locks, and painting of one coat of 5 redoxide and two coats of aluminium/enamel paints. When the aspect is fixed on offset bracket using 'U' bolts and nuts, a through bolt shall be provided by drilling of hole in the signal pole to prevent the offset bracket from sliding down.Item 5 Contd., (Supply of surface base, offset bracket, CLS pole, CLS aspect complete, ladder with shoes and platform, Speed limit board, LED aspects, current regulators, lamp holders, lamps, filament switching unit and CLS transformer is not covered in this schedule). ['U' bolts and nuts, through bolts and nuts, cement, stone jelly 20/25mm dia, river sand, Signal Colour Rings, all fixing bolts and nuts, lead wood, paints PVC/Nylon sleeves, enamelled number plates, enamelled marker boards, EWS locks, and all other miscellaneous materials for the work shall be supplied by the contractor).
79
5501
434594.8
... More
Excavation of pit and casting concrete foundation as per Drg. No. SG/CN/02/10 using metallic templates, for erection of ground type colour light Shunt signal. (Foundation bolts and nuts, cement, river sand, stone jelly of size 20/25mm and all other miscellaneous materials for the work shall be supplied by the contractor).
12
2518
30222.6
... More
Erection of Ground type shunt signal complete including surface base, signal pole, LED aspects/Lenses, bulbs with holders (whichever is applicable), fixing of lens guards, number plate, termination of 7 tail cables, wiring of signal unit, provision of EWS locks and painting of one coat of redoxide and two coats of Aluminium /.enamel paint, (Supply of Ground type shunt signal complete including surface base, signal pole, LED aspects, holder, bulbs and lenses is not covered in this schedule). [Wire PVC 3/0.75mm copper, lens guards, EWS locks, enamelled number plates, bolts and nuts, lead wool, paints and all other miscellaneous materials shall be supplied by the contractor).
12
2097
25164
... More
Fixing of offset bracket using 'U' bolts and nuts erection of posts type shunt signal termination of tail 8 cables, pvovision of EWS lock and painting of one coat of redoxide and two coats of aluminium / enameled paint. The work also includes drilling suitable holes ont he CLS post and provision of a through bolt with nut to prevent the offset bracket from slipping down.
12
1613
19359
... More
Fixing of junction type route indicator - 1 way to 6 way - complete / fixing of additional limb to the existing route indicators, termination of tail cables, wiring as per approved circuits diagram, provision of required 9 number of EWS locks, wire mesh and painting. (Supply of junction type Route Indicators - complete and additional limb is not covered in this schedule). [fixing bolts and nuts, EWS locks, wire mesh, PVC/Nylon sleeves, paints and all other miscellaneous materials shall be supplied by the contractor] - Fixing and wiring of direction type route indicator - 2 way
-
-
47181
... More
Fixing of Offset brackets using 'U' bolts and nuts, erecting of Calling On Signals/'A' marker lights, termination of tail cables and wiring, provision of EWS lock, number plates/ markers boards and painting. The 10 work also includes drilling suitable holes on the CLS post and provision of a through bolt with nut to prevent the Off-set bracket from slipping down. (Supply of Calling On Signal / 'A' marker light, LED aspect / holders and bulbs and off set brackets is not covered in this schedule). ['U' bolts and nuts, through bolts with nut, EWS lock, Enamelled number plates, wire mesh, PVC/Nylon sleeves, paints and all other miscellaneous materials shall be supplied by the contractor.
18
1427
25690.5
... More
Laying of 50x6mm G.I. tape for interconnecting of earth electrodes.( This includes excavating of trench to a suitable depth as per site requirement and refilling of the same after laying of GI tape as per requirement
300
148
44400
... More
Supply and fixing of Netlon wire mesh of all windows and ventilators as per instructions of Engineer-in-charge including labour charges.
500
291
145500
... More
Fabrication,supply and erection of conventional Earth to signalling equipments -Excavation of earth and providing earth pipe of size 50mm dia, 3.5mm thick 2.0 m. long G.I. pipe with masonry tub constructed 13 around at earth locations as specified by site Engineer. Alternate layers of 30kgs-chrcoal and 30kgs-common salt to be filled in the pit while closing. The pipe perforation etc., to be carried out as per drawing No. SK 10/10.. The earth pipe to be connected to the function with cable as supplied by Railways. The reading should be painted on the masonry tub. The masonry tub of 400X400X450mm should be covered with cement slab. ( All materials to be transported and supplied by the contractor except cable.)
240
5100
1224000
... More
Supply, painting and fixing of cable Gland Plate for full GKP box as per site requirement.
242
533
128986
... More
Fabrication,Transportation and fixing of aluminium ladder at site made of Aluminium angle of size 16 38mmx5mm width 280mm ,Flat size with powder coated colour as desired by engineer incharge at site and fixing of 25mmx5mm, Drilling of suitable holes for fixing of Hylam sheet 3mm thickness on ladder and 2 Nos of PVC trough 100 mm with cover fixed on hylam sheet along the ladder with all fixtures necessary ancillary materials required for fixing to be supplied and as directed by engineer incharge at site.(Per Unit = RMT)
190
2865
544350
... More
Installation, testing and commissioning charges of BPAC with dual sensor.
10
56180
561800
... More
Installation of MAPLE 4C and fibre multiplexer system at station
20
12921
258420
... More
Breaking of RCC concrete in Relay Room / Panel Room for drawing cables to ground floor/ 1st floor as per site requirement.
10
3700
37000
... More
Providing services of helping hand man power to carry out miscellaneous/sundry works in the 20 office/field between 08.00 hrs and 20.00 hrs of the day and accompanying Railway staff with all expenses of transportation, accomodation, food, consumables etc., with all ascents/descents, taxes, octroi, cess, fees, duties, with contractors tools (Per Unit = Man Day )
665
515
342475
... More
Supply and application of CYPRUS silane Althatic, Urethane Resin Blend Solvent Based high 21 technology Membrane radiant heat reflecting insulating Thermal berriar coating industrial grey colour with agenuine products sticker when remove display void on each container 20 Ltrs (appx) apply for two coats as per RDSO guide lines.
80
3860
308800
... More
Shifting of existing working functions like signals/Shunt/Calling on/Points/Track circuits etc.,from old cable to new laid cables carefully without affecting the traffic under disconnection/blocks.
104
1460
151840
... More
Foundation and erection of Electrically operated lifting barrier assembly drive mechanism motors 23 etc.with control panel, boom, locking arrangements & crank handles complete with hand generator as per detailed technical pecification and instructions of site incharge.(Tthe above workincludes exccavation of pits & concreting of pits & foundatiion for gate meeting post 2 Nos. Erection of Electric lifting barriers-2 set, fixing of EOLB panel & its wiring-1 Noas per detailed technical specification and instructions of site incharge.
1
16810
16810
... More
Sliding boom arrangement-Fabrication, supply, transport, erection at site, siding type mechanical type boom, make assembly, movement dive mechanism, resting stand etc. as per following technical specification
-
-
406771
... More
Fixing of sliding type mechanical boom, make assembly movement drive mechanism, resting 25 stand, meeting posts and fixing of E type locking plate to meeting post and in gate lodge as per the site incharge instruction. NOTE: all required nut, bolts, chains, pad locks-2nos, and other misecllaneous items are to be supplied by the contractor.(Per Unit = per LC gate (both booms)
3
23650
70950
... More
Excavation of pit and concreting foundations for resting stand/meeting stand (approx 10 Nos/item- 2)
3
16800
50400
... More
Earth work in filling enmbankment
700
164
115388
... More
Cutting of rails
25
47
1175
... More
Supply and fixing of retro reflective tape on lifting barriers. (2 nos.)
2
5387
10774
... More
Excavation of pit of 400 mm X400 mm X1500 mm at a given location and erecting rail post of various lengths, plumbing and concerting with cement concrete in the ratio of 1:3:6 with 40 mm graded stone and river sand and curing the same ( rails and cements will be supplied by the railway) "
14
300
4200
... More
Supply and fixing of protection arrangement to the pedestals and meeting posts of lifting barriers by providing MS Chain, 25mm ring, 10mm thickness of 1 meter length and fixing to the rail posts already available, drilling 12mm holes, fixing with 115mm x 12mm bolts and nuts and painting chain and rail posts.
5
2739
13695
... More
Arranging of skilled and unskilled workers with required tools during point blocks for removal of S&T assets to give way for track machines and refixing the remooved assets after insertion/removal of point (Per Unit = Per Point
20
3178
63560
... More
Communication arrangements and PA system at gummities as per the instructions of site incharge
8
1093
8744
... More
Installation charges for automatic media changeover and Modem ( Supplied by Railway) ( 1 set comprises of one automatic media changeover and one modem)
10
7865
78652
... More
Supply and fixing of cross on the signals (signal not in use) made of hard wood of size 1000mm X 100mm X 20mm (painted white as per Signal Engineering Manual) and suitable clamp made of MS flat.
46
328
15088
... More
Supply and fixing of Safety slogans in three languauge (Telugu, Hindi and English) with minimum of size of the Slogans 200mm X 1000mm or suitable to the slogans proportionate payment for each sheet.
24
650
15600
... More
Fencing for Location Box duly providing foundation ( A pit of size 400mmX 400mm X 1000mm is to be dig and cement concrete foundation in the pit in the ratio 1:3:6 to be casted) and fixing the frames/doors and E 37 type lock to the fencing with supplied material. THe rail post / angular is to erected up right in the foundation. All the materials are to be arranged and used by the contractor ( Rail post/ angular / frames / E type locks will be supplied by the Railways). Cutting of rail post / angular to the required length , transportation to the site by the contractor.(Per Unit =Set (4 Nos))
195
3856
751920
... More
Transporting and supply and installation of Concrete (RCC) route indicators at intervals of 50 38 meters as per technical specification. They should be of standard RCC with letters one side "SCR" and the other side "S&T" cable" as per drawing SK12/10 of RVNL/SC . In case of telecom quad cable joint locations it shall be painted with red colour. 4 Nos. of MS bars 8mm dia including curvature and 6mm dia Stirrups. (6 Nos.) to be provided by the contractor. (Inspection by consignee)
710
807
572970
... More
Supply and laying of DWC pipe made of polythene 103.5 mm inner dia and 120 mm outer dia in 6 mtrs length as per IS 14930 Part-II along with 1 coupler per pipe asper specification IP 67 grade for every 6 mtrs. (Inspection by consignee)-Proof of purchase to be submitted along with supply of the item
1060
196
207760
... More
Design and preparation of computer aided (Auto CAD) diagrams. Note: Details Design and drawing of above drawings and submission of two draft copies for approval. One copy is returned either duly approved for 40 making a fiar copy or for resubmission for approval after incorporating the changes as required by railways. After preliminary approval required number of prints are submitted for Administarative approval. After the Administarative approval negatives of the above drawings , a soft copy on a CD along with required number of final prints are submitted. After completion of work 6 sets of asmade documents are to be submitted in bound booklets.
-
-
356000
... More
Supply & laying of Duble wall corrugated HDPE pipe of size 78mm OD and 63mm ID in 6 meters. Length/along with one snap fit coupler for each bar confirming to IS14930 Part-II Mark on it. (This item should be inspected by RITES) ( Inspected by Consignee). (Per Unit = RMT)
5000
96
483000
... More
Supply of approved quality of paint manufactured by Asian/British/Johnson and Nicholas accepted by DSTE/ASTE and Painting of all S&T gadgets in two coats duly scarping the rust as directed by SSE/SE at site, the colour to be used as per standard practice and as directed by SSE/SE at site.(Inspection by consignee)
1500
78
117000
... More
Execution (Supply , transportation, installation and commissioning) of pin brazing /exothermic out 43 weld connection as per IEEE 837 for earth connection 38mm x 6mm GI flat with either location box or conventional earth or MFE electrode (all equipments & material required for brazing /welding of railhead continuity will be arranged by the contractor. (Per Unit = Per Bond)
1220
1050
1281000
... More
Supply ,transportation and installation of Cable termination rack similar to Medha Servo Drives or 45 similar with all fixtures ,Supporting Angles,Triangle Bases,Insulators,Din Rails duly fixed on rack with powder coated and color of rack to be matched with the relay rack supplied by Medha Servo Drives and as directed by engineer incharge at site.
12
27280
327360
... More
Supply ,transportation and installation o f Cable ladder rack with all fixtures ,Triangle Bases,Insulators duly fixed on rack with powder coated and color of cable ladder to be matched with the relay rack supplied by Medha Servo Drives and as directed by engineer incharge at site.
7
8600
60200
... More
Filling of sand in the masonary cable duct made in relay rooms and plastering the same after taking all cables in side.(Per Unit = Per Location )
3
12530
37590
... More
Supply, Erection and Fixing of retro reflective type BPAC Warning boards of size 48 600mmx40mmx6mm thickness of 2.2 mtrs long. [retro reflective type BPAC Warning boards, Angle, stone jelly of size 20/25mm dia, river sand, cement , fixing bolts and nuts, paint and all other miscellaneous materials required for the work shall be supplied by the contractor].
50
7118
355948
... More
Non Interlocking arrangements
2
12360
24720
... More
Supply of Pheonix contact for 10sq.mm power cable termination board on power panel of Model No OTTA 25 or similar.
180
191
34380
... More
Laying of RCC / DWC pipes carrying from the stock of central place at station to the work spot 51 without causing any damage and placing them in the trench duly clearning the ballast per track crossing / down the culvert in the trencyh, gap between DWC / RCC pipe and collar has to be closed using cement mortar. (DWC / RCC pipes will be supplied by Railways) and all other materials viz., collars for the joints, cement mortar for closing gaps between collar and pipes are to be supplied by the contractor.
2620
50
131000
... More
Painting of Lifting barriers booms with alternate band of yellow and black and painting all accessories(Per Unit = Per LC)
2
2250
4500
... More
Supply, Installation & Commissioning of floor mounting type Gate Panel( All the tools & plants required for the above work system shall be arranged by the contractor)
2
53826
107652
... More
Modification of Data Logger embedded Software when a Station Master fails to set the point 54 against occupied within stipulated time after arrival of the train for the specified station (this includes LED indication system with 6 indications, buzzer and acknowledgement button with interface face facility to existing Data Lagger.
1
35000
35000
... More
Supply of 19" - 42U Rack complete with fittings for housing SDH equipment , FDMS, DDF and other 55 equipment like cable managers completely wired as per the technical specification mentioned below. It should be able to lock all the equipment with only order wire Telephone outside the rack. the rack should be of APW President/ Rittal make etc., The components of the rack are specified below. It includes transportration and installation of rack in prefab / building at specified stations. (Inspection by Consignee)
4
41600
166400
... More
Supply and Installation of Fault analysis terminal for analysis of fault and generating reports for Datalogger installed at stations with minimum 19 inch display terminal with i5 processor 4GB RAM, HDD 1 TB, Windows 10 Licenced .(Inspection by Consignee)
2
47080
94160
... More
Implementation and testing per station of point reversal alarm.
1
5000
5000
... More
Supply and installation of UPS 1000va , 30 min backup, nemuric , as per instructions of engineer in charge . (Inspection by consignee)
6
9534
57204
... More
Supply, fabrication, installation and fixing of panel operator consol with arrangement to fix 55" 59 VDU's - 2Nos. Reset boxes, and other S&T gadgets. This shall be made of not less than 18mm thick playwood/novopan or better materials with storage facility of approved colors with contractors' materials, lead, lift and manpower as per the instructions of engineer in charge and as per the enclosed drawing. (Inspection by Consignee)
2
244641
489282
... More
Supply, installation and commissioning of hand held work station complete as per the spec. or 60 better with necessary cables, programmes, software for programming and trouble shooting and commissioning of EI. Intel core i5 processors with 2.6 GHZ speed, 1TB HDD SATA hard disc, windown8 OS, 15" HD LED display, 2GB dedicated graphics memory, web cam, wireless LAN IEEE 802.11 b/g/n, usb ports, 3 years branded antivirus license, make : DELL/SONY/HP.(Inspection by Consignee)
2
47990
95980
... More
EMI/ Earthing arrangements for EI including end Goompties for object controllers as per RDSO 61 specification as required for the EI system as per Rly. Br. letter No.2010/Sig/SGF/EI (Ansaldo) dated 22.06.2011 shall be followed. All materials shall be supplied by the contractor. Maintnance free earthing material shall be inspected by RITES. Balance material shall be inspected by consignee (per Unit = Per stn/loc)
4
200000
800000
... More
Supply and laying of 50 Sq.mm. insulated copper cable in suitable PVC pipe. (Inspection by Consignee) All other materials required for installation to be arranged by contractor.
200
700
140000
... More
Supply and installation of SC to SC or PC-SC or FC-SC 3 meter long patch cords as directed by site incharge. (Inspection by Consignee)
50
680
34000
... More
Supply and installation wiring and commissioning of NI panel made out of MS sheet 16 guage of 64 size 1200mm height x length 1200mm x depth 600mm with powder coated and also two relay frames fixed inside the panel for fixing of relays and wiring and all the internal wiring between signals, track circuits upto termination point with 200 wagos duly wired.
2
51200
102400
... More
Full location Box: Supply and fixing of GI flat of size 1050x25x3mm as given in drawing no. 65 RVNL/S&T/SC/06/2016. to connect all cable armous to earth point with suitable nuts/ bolts as given below A)GI nuts/boltsof size 8x25mm with two flat and one spring washer of 23 set B) GI nuts/boltsof size 12x40mm with two flat and one spring washer of 02 set as per site incharge.(Per Unit = Per LB)
174
888
154605.96
... More
Half location Box: Supply and fixing of GI flat of size 550x25x3mm as given in drawing to connect 66 all cable armous to earth point with suitable nuts/ bolts as given below A)GI nuts/boltsof size 8x25mm with two flat and one spring washer of 13 set B) GI nuts/boltsof size 12x40mm with two flat and one spring washer of 02 set as per site incharge.(Per Unit = Per LB)
64
548
35116.8
... More
Supply and fixing of rubber mating thickness 2mm. As per IS-15652/2006 with suitable adhesive material
400
2390
956000
... More
Supply of wire mesh (Gl) with welded MS flat /Aluminium frame and fixing on windows/ventilators of different sizes as to be given by engineer
1500
669
1003590
... More
Supply, Installation, Testing and commissioning of 1 loop Addressable fire alarm panel which consists of display board which will have 160 character display board with touch keypad, Mother board which will have CORTEX 32 Processor , Inbuilt RS-485 Networking circuit for peer to peer networking , Inbuilt USB 2.0 Port 69 for upload and download the configuration tools, two inbuilt programmable inputs , two inbuilt NAC's and Three programmable relays and 4 loop card circuits , power supply board which will have SMPS fully protected board , which its operates on 120 to 220V AC +/- 10% with 50/60 Hz , battery backup 24V DC with built-in charger, the panel have IP-50 rating optional : for BMS integration MODBUS converter , Graphical Software , Software for TCP/IP module , provision for Auto dialer approval UL listed. As Per RDSO Specification No.RDSO/SPN/217/2018 ver 2.0 or latest.
4
187500
750000
... More
Supply, Installation , Testing and commissioning of Addressable Multi detector combination of heat 70 cum smoke wth isolator base binary coded address setting. Dual LED's for 360 degress visibility. Sleek low-profile housing design. Regular 100mm base IP rating: IP-42. Approval : UL listed , (As per RDSO Specification No.RDSO/SPN/217/2018 ver 2.0 or latest)
140
6750
945000
... More
Supply, Installation ,Testing and Commissioning of 2C X 1.5 Sqmm unarmoured fire survival cable ( As per RDSO Specification No.RDSO/SPN/217/2012 ver 2.0 or latest)
2000
300
600000
... More
Supply, Installation ,Testing and Commissioning of power supply unit 24V DC , 5 amps ( As per RDSO Specification No.RDSO/SPN/217/2012 ver 2.0 or latest)
4
61600
246400
... More
Supply, Installation ,Testing and Commissioning of Analogue Controller for LHS cable ,( As per RDSO Specification No.RDSO/SPN/217/2012 ver 2.0 or latest)
1400
1271
1779666
... More
Supply, Installation ,Testing and Commissioning of Resettable type Analouge LHS cable ,( As per RDSO Specification No.RDSO/SPN/217/2012 ver 2.0 or latest)
4
90042
360169.48
... More
"Supply and placing of trunking and capping (RCC Duct) of 500mm Width as per Drg.No.SDO/Cable laying/007 (Annexure-10) ,as detailed in document No.RDSO/SI/G/2010 Ver.1.1 or latest on 'Guidelines on signalling cable laying.(Inspection by RITES)"
5715
1278
7303770
... More
Excavation of Cable trench in all kind of soil except hard rocky areas including clearing of roots of 77 trees, rocks, bushes etc., to a depth of 0.5 mtr-0.6 mtr to accommodate the duct under NS item and to a width of 0.5 mtr. This shall include refilling of earth as per instructions of Engineer Incharge. Laying of cables is not included in this schedule. In case of less depth, payment will be done proportionate to depth subjected to minimum depth of 500 mm.
5715
150
857250
... More
Supply of Electronic Interlocking (Hot Standby) for stations with Signaling functions up to 125 units 01 as per Function table enclosed along with 15% spares, tools, manuals and Instruments. Distributed E.I to be provided as per RDSO Specification No.RDSO/SPN/192/2005 Ver 1.0 or latest.Note: Description of various modules, sub assembly and other accessories required as detailed in explanatory note for the above work with unit rate to be furnished by EI manufacturer/contractor as annexure. (Inspection by RDSO)
2
7832317
15664634
... More
Incremental rate for signaling functions in EI SYSTEM over and above 125 functions under item No 1 (Inspection by RDSO)(Per unit=Per function)
433
71250
30851250
... More
Supply of commercial grade operator VDU of size 55" Full HD , Model no.55SM5KD LG make or Similar. (Inspection by Consignee)
4
226320
905280
... More
Supply of fan less embedded industrial grade computers ( Similar to Moxa V2406 or better ) with all accessories such as key board, mouse,antivirus etc. of industrial grade as per approved Specification as recommended by RDSO (TAN No. STS/TAN/3007 Version 1.0 or latest) (Inspection by Consignee)
4
257250
1029000
... More
"Installation, Wiring, testing, Soldering of all EI equipments, earthing of EI Equipment, Relay Racks and Power Equipment etc. including supply power cable and Documents/Manuals etc."(Per unit = EI)
2
633807
1267614
... More
Design and drawing for complete indoor signalling work for new PI/RRI/EI (per unit = PI/EI/RRI)
2
243671
487342
... More
Design and development of indoor drawings for PHASE Working.(per unit=Per station)
2
64752
129504
... More
Complete Indoor work of installation, wiring and commissioning - for PHASE WORKING.(per unit = Per station)
2
38851
77702
... More
Commissioning of Electronic Interlocking system
2
16318
32636
... More
Training of Railway Personnel in installation, commissioning, testing, trouble shooting and in diagnosing faults using diagnostic tools/flow charts including supply of necessary documents.(Per unit= 60 Man days)
1
50000
50000
... More
Training on application software for designing, change in the logics and converting it suitable for system and loading the programme into the working system for alteration of SIP/TOC. The training should be comprehensive with complete document.(Per unit =90 Man days)
75000
1
75000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements