National Library Tender
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
National Library Tender
Other Services
Eprocure
Opening Date24 Dec 2021
Closing Date24 Jan 2022
Tender Amount₹ 14,50,00,000
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_NL_664942_1Tender No
NL/MoW/RFP/2021-22/01/354Tender Authority
National Library ViewPurchaser Address
-Website
http://https://www.nationallibrary.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Providing and fixing of 900 mm dia 4000mm height word pole made of 6 mm ACP (Aluminium composite panel ) aproved colour with laser cut alphabet 22 language fixed with Fabricating MS Section inner support vertical 48.3 mmx 5 mm circular hollow section pipe fixed in floor inside ring frame finsh with aproved colour complete as per design, as directed by engineer incharge
1
-
-
Providing and Fixing wooden and glass railing height 1200mm made of wooden ornamental design pillars @1800 mm C/C size of 125x125x1200mm .10mm thick toughened glass (height 900mm )fixed in wooden pillar including required hardware, PU polish etc. as per design, drawing and direction of engineer incharge
9
-
-
Providing & fixing 12mm thk toughened clear fixed glass partition using spider / patch fittings as per their specification and requirement. Item to include patch fittings asshown in the drawing at all necessary joints and depending on the weight of the glass and providing additional 12mm thick glass fins connecting the spider fittings together if required. Item to include sealant between two glass panes. Shop drawings to be approved by the Architects before installation of the glass partitions with all hardware type and its sizes and placement to ensure the partition is sturdy. Item to include all necessary hardware, spider & patch fiitings, pharmas etc. all complete.
11.88
-
-
Providing & fixing bench 500mm Height to be made using 25 mm Commercial Plywood in 2 layers with 25x25mm timber members used as supports in between finished with 4 mm thick veneer with PU polished on all sides complete as per design, drawing and as directed by incharge. Bench Length 1800mm , Width 500mm & Height 500 mm
5.4
-
-
Providing & fixing Touch Screen display cabinet 800 mm Heigh to be made using 25 mm thickness BWP Ply wood Front, Back, Side , top & inside support as shown in the dwg. All exposed surfaces of the cabinet shall be finished with approved colour 6 mm Acrylic solid surface finish . Top Side cutout for touch screen in the centre for screen. Display case one side to be openable .The rate shall be inclusive of beading , antitermite treatment adhesive and all the hardware like nails, screws, locks etc. required to complete as shown in the drawing as per directed by incharge Cabinet height 800mm. Mode of Measurement item to be paid as per top side
6.24
-
-
Providing and fixing of S.S alfabets letter as per approved drawing . The stroke / width of the letter will be 50mm, emboss will be of 50mm & height of the letter will be 400 mm in case of english and 550 mm in respect of hindi and other language including matra (375 mm for hindi alphabets & 175mm for matra). SS304 Glossy matt finish having thickness of 18 gauge/ 1.2 mm including neccessary approved brand matreial fixture and finishing requisite scaffoldings etc. complete job as required and as per the direction of engineer in charge. ( letter are hanging on ceiling help of havey duty stainless steel wire)
44
-
-
Providing & fixing display platform to be made using 18mm ply 450mm high with 6mm Acrylic solid surface finish on all visible surfaces and 18mm supports inside the structure complete with required hardware,powder coated brass fittings complete as per design, drawing and as directed by incharge. Height 450 mm Mode of Measurement item to be paid as per top side
42
-
-
Providing and fixing 450mm depth display cabinet using 18mm ply on all sides and inside supports, finished with 6mm thick Acrylic solid surface on outside upto 700mm. including antitermite treatment with required coated brass fittings complete as per design, drawing and as directed by incharge. Mode of Measurement item to be paid as per front side
1.4
-
-
Providing & fixing display cabinet 600mm deep to be made using 32 mm Commercial Plywood back and all sides 18 mm Ply finished with 6 mm Acrylic solid surface finish on outside and 1 mm thickness Lamination inside .Front glass (1910mm) to be extra clear mm (5+5+1.5)11.5 mm thick laminated toughened . Glass to be fixed with 50x100 First class teak wood member finished with Acrylic solid surface including required Ghana teak wood mounding, beading including antitermite treatment & 5 mm frosted acrylic sheet as per suitable size complete with required hardware,loks,powder coated brass fittings complete as per design, drawing and as directed by incharge Cabinet Depth 600 . Mode of Measurement item to be paid as per front side
24.69
-
-
Providing & fixing display cabinet 550mm deep to be made using 32 mm Commercial Plywood back and all sides 18 mm Ply finished with 6 mm Acrylic solid surface finish . 10 mm thick toughened laminated Extra clear glass front ,side & top mm thick Glass to be fixed with 50x100 First class teak wood member finished including antitermite treatment complete with required hardware,& fittings complete as per design, drawing and as directed by incharge .Mode of Measurement item to be paid as per front side
6
-
-
Providing & fixing display cabinet 450mm depth to be made using 25 mm Plywood self all insides finished with 6 mm Acrylic solid surface finish on outside and self inside .seft cabinet as per suitable size complete with required hardware, fittings complete as per design, drawing and as directed by incharge Cabinet Depth 450. Mode of Measurement item to be paid as per front side
9.3
-
-
Providing & fixing of display cabinet 25 mm ply finished with 6 mm Acrylic solid surface finish on outside 1500x1000 mm Door Shutter open with 3-D Adjustable Concealed Hinges 150mm high .Inside make Nich 19 mm ply with 6 mm Acrylic solid surface finish nich depth 210 mm . Nish Front Cover with 8 mm Toughened extra clear glass. Glass to be fixed with 25x25 mm thick First class teak wood member finished Door Cabinet back side support 50x100 mm First class teak wood including antitermite treatment as per suitable size complete with required hardware,( 3-D Adjustable Concealed Hinges 150 mm High, Locks )powder coated brass fittings complete as per design, drawing and as directed by engineer incharge Cabinet Front area Measured
31.68
-
-
Providing & fixing display cabinet 550 mm deep to be made using 25 mm BWP ply on back support with 50x100 teak wood member finish with 6 mm Acrylic solid surface and 18 mm ply all side finished with 6 mm Acrylic solid surface finish outsid & inside. Top glass (410mm deep) to be extra clear (5+5+1.5)11.5 mm thick laminated toughened to be fixed with 50x100 First class teak wood member finished including required Ghana teak wood mounding, beading including antitermite treatment complete with required hardware & fittings complete as per design, drawing and as directed by incharge Front area to be Measured
31.68
-
-
“Providing & Fixing of Flocked textile floor covering of Nylon 6.6 face fiber or equivalent of approved make with 100% Nylon and completely water proof resilient backing. The flooring should be Anti static+B32 with thickness of 4.3 mm and approximate weight of 1.8 k.g./sqm of roll form. The carpet should be completely stain resistant and of a density approx. 80 million fibers/sq.mtr (70 million fiber/sq.yd) in the width of 2 mtr .The floor covering should have Fire Test EN-13501, Appearance Retention Hexapod ISO 140-8, Friction Slip Resistance Test EN 14041 Class DS, SANITISED anti-microbial treatment, with resilient waterproof backing, anti allergic which is certified by British allergy foundation, with ten year replacement guarantee complete in all respect as per direction of Engineer-in-charge.
82.64
-
-
Providing and fixing Acoustic wood wool 20mm thick Panels with GI ultra frame work for wall paneling as per Design drawing consigning of floor channel of size 50*32 *32*0.5mm thick at bottom and top fixed with 35mm Nylon sleeves & 35mm screw. Further to be filled with 50 mm 1000GSM non-woven thermal bonded polyester Wadding. The frame to be fixed to the walls by means of Angle holdfasts or cleats of required size complete with Expandable anchor fasteners of 65*10mm dia fixed On each vertical member@1000mmC/C. the work Shall be executed as per drawing , specifications& instructions of engineer in charge. ( 15 mm foam & fabric will be used on woodwool for Designing work ; fabric color as per engineer’s choice)
Make: AURAL woodwool; ARO FIBER
195.64
-
-
Providing, & fixing of Polished teak Wood Stool of traditional design with carved legs, as per enclosed drawing. Seat to be made of 50 density PU foam 50 mm thick , covered with upholstery fabric of desired shade. ). The size of stool shall be: 450mm high x 430 mm diameter,
24
-
-
Providing and fixing teak veneer finish Counter table tops of desired size, made out of 19mm thick on top side and supported on 19 mm thick vartical as shown in the drawings All the construction shall be in BWP board and internal shelves shall be of 19 & 12 mm thick BWP board . All exposed surfaces shall be finished with approved Laminate of 4mm thick teak veneer with Seasoned teakwood 19x35 mm moulding. All internal & external surfaces shall be finished with approved French sprit polishing :. Item to also include drawers on telescopic channels complete, as shown in the drawing. The rate shall be inclusive of adhesive and all the hardware like nails, SS screws, SS channels, magnets, SS handles, brass locks of Godrej/Harrison or equivqlent make, SS hinges etc. required to complete the item.Item to also include all mouldings and panelling to be done for the shutters, drawers, skirting etc Counter 600 deep ,Front Area to be measured
10.26
-
-
Covering openings/exposed fixtures/ A/C Ducts e.t.c. with 18-19mm BWP boards with laminate finish including cost of making grooves/openings/ louvers as per requirement, duly fixed using SS fastners/Screws, including all hardware, as per directions of Engineer in charge/Consultant . Exposed Surface area of board to be measured
108
-
-
Providing and fixing of modular table with work top made of 25mm thickness prelam particle board of interior grade II Type III as per IS 12823:1990 with flat edges, work top clad with decorativie laminate on front as per standard and back side with white balancing .Flat edges duly sealed with 2mm thick machine pasted PVC beading . Worktop supported by 25mm thick gable and 18mm thick modesty panel made of prelam particle board of interior grade II Type III as per IS 12823:1990 with flat edges, Meeting table with 2 nos metal brush flaper with metal tray made of CRCA steel 1.2mm thick for wire managment and switich/socket mounting provison. Verticl cable riser made of CRCA steel 1.2mm thick for provision of moving wires from floor to flaper. all CRCA steel components / parts pcowder coated of 50-60 micron. The products should be as per BIFMA standards. The boards used sholud meet international standards of quality and safety, indian standard IS 12823 grade II should meet long time loadbending , screw - withdrawl strength and moudulus rupture and modulus of elasticity bending test as per IS 2380 (Part 4 ,Part 13 and Part 14). size of 3600 X1500X750 Complete as per the approved sample/image/ shop drawing by supplier and as per the direction of Architect & Engineer-In-Charge.
1
-
-
Provding & fixing of Reception Table Top made of 30 mm thick BWP Ply, all exposed surfaces made of 19 mm thick ply finish with 4 mm veneer the rear side of the table to be cladded in granite stone of approved colour stone to be fixed frtom top to bottom on the front & top side as shown in the drawing. Internal shelves shall be of 19 & 12 mm thick BWP board. all inside surface of ply to be finish with duco paint & polish of approved colour. Front side 35x50 mm teak wood cladding with 4mm teak veneer with polish finish as per drawing at front. Front side 10 mm toughened glass fixed with 50x100 mm first class teak wood frame & beading with allen bolt Table top made of 19 mm bwp ply with 4 mm thick venner with polish.The Granite stone panel in front of the desk as shown in drawings. 100mm - 125mm high brass or stainless steel cut letters and museum logo to be stuck over the sandstone panel on the front side of the table and 75mm high on one side of the table as shown in the drawings or as directed by the Architect. Table will be provided Drawer mobile & desktop pedestal fitted with metabox sliding system and front mounted single lock system Key Board Tray etc complete .Item to include all necessary hardware including concealed SS hinges, concealed SS handles, SS knobs, locks, screws, nails, fevicol, etc Table 680mm depth, Front Area to be measured
10.27
-
-
Providing and placing in position chair of the following specifications. The cushioned seat assembly shall consists of insert polyurethane foam upholstered with foam laminated mesh fabric. The back shall be made up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. Indicative size of back shall be (W)-48.5cm, (H)-62.0cm & indicative size of seat shall be (W)-46.0cm x (D)-52.5cm, armrest shall be injection moulded with height adjustable up to 4.5+/-0.5cm in 3 steps and width adjustable up to 20mm. The mechanism of chair shall have following features:360 degree revolving type, Front pivot Synchro mechanism, Tilt tension adjustment, 3 position tilt limiter with Anti-Shock feature. Spine bracket shall made of Aluminium diecast piece connecting back with mechanism. Neck rest assembly shall made up of polyurethane foam upholstered with foam laminated mesh fabric. The neck rest assembly is mounted on the top of back. it can be adjusted up to 4.5+/-0.5cm up-down and has regular adjustment of 30 degree +/-2 . The chair shall be provided with pneumatic height adjustment which shall have stroke of 9.0 +/- 0.3 cm. The pedestal shall be made of die-cast polished aluminium. it shall be fitted with 5 nos twin wheel castors. The size of the pedestal shall be 66.0 +/- 0.5 cm pitch-centre-dia (76.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black nylon.Overall dimensions (Indicative) of Chair shall be, Width of Chair - 76.0cm, Depth of Chair - 76.0 cm as measured from pedestal below. Height from ground - min 117.0 to max 132.0 cm. Seat height - min45.0 to 54.0 cm. Dimensions tolerance / variations shall be within +/- 1 cm, MESH FABRIC: Mesh Fabric shall be 100% Polyester weighing not less than Weight: 370 GSM, having abrasion value of over 50000, fastness to colour greater than 4, fastness to rubbing 4 or better(BS 1006 (1990). SEAT FABRIC: Seat Fabric shall be 100% Polyester weighing not less than Weight: 257GSM, having abrasion of over 36000, fastness to colour greater than 4.5, fastness to rubbing 4 or better(BS 1006 (1990). POLYURETHANE FOAM: 45kg/m3 or higher density foam in seat as per manufacturer's specifications. ARMREST ASSEMBLY: The armrest assembly shall be per manufacturer’s specifications having armrest structure in polished aluminium with 2 directional ( height and depth) adjustable PU arm tops.The products should be as per BIFMA standards, all complete as per specicitions, tender drawings, Reference images, approved samples/shop drawings and direction of Engineer - In - Charge.
10
-
-
Providing and placing Three Seater Sofa of Size 2000mm x 800mm x750mm. The understructure shall be made in teakwood. Wood used complete process of timber seasoning by water seasoning method. The wood used in frame shall be termite resistant. Section of wood be 50mm x 50mm and 50mm x 25mm. The structure of arms shall be made in teakwood. The side panel should be covered with 6mm thick MDF sheet so as to enable the pasting of PU foam and facilitate the stretching of fabric. All the wood joints shall be fixed with adhesives and 100mm 80mm staple pin. The sofa shall be upholstered with high quality leatherite.Synthetic leatherite (Not less than 380GSM) of high quality finish. The elastic belt in seat with thickness of 2mm above all 100mm 40 density foam + 25mm 40 density foam in seat, 50mm 28 density foam + 25mm 32 density foam in back. Base shall be fixed with 15mm 28 density foam fixing with SR 505 solution. Hassien cloth belt in back with thickness of 2mm and width 55mm. the stapler machine shall be used for fixing hassien cloth and elastic belts for seat and back. PU foam used of density 40-50kg/m3 and covered with approved leatherite. No wrinkels, stains, tear shall be visible. Nylon bonded thread shall be used for stitching the upholstering. Stitching shall be done in straight line. No wrinkels along the stitching line and no pin holes. The joint between side and seat shall be in straight line. The seat shall be seperate from the structure and upholstered from all sides with the approved fabric/leatherite. Wooden legs to be provided under the sofa.
1
-
-
Providing and placing single Seater Sofa of Size (L)800x(W)750x(H)800 . The understructure shall be made in teakwood. Wood used complete process of timber seasoning by water seasoning method. The wood used in frame shall be termite resistant. Section of wood be 50mm x 50mm and 50mm x 25mm. The structure of arms shall be made in teakwood. The side panel should be covered with 6mm thick MDF sheet so as to enable the pasting of PU foam and facilitate the stretching of fabric. All the wood joints shall be fixed with adhesives and 100mm 80mm staple pin. The sofa shall be upholstered with high quality leatherite.Synthetic leatherite (Not less than 380GSM) of high quality finish. The elastic belt in seat with thickness of 2mm above all 100mm 40 density foam + 25mm 40 density foam in seat, 50mm 28 density foam + 25mm 32 density foam in back. Base shall be fixed with 15mm 28 density foam fixing with SR 505 solution. Hassien cloth belt in back with thickness of 2mm and width 55mm. the stapler machine shall be used for fixing hassien cloth and elastic belts for seat and back. PU foam used of density 40-50kg/m3 and covered with approved leatherite. No wrinkels, stains, tear shall be visible. Nylon bonded thread shall be used for stitching the upholstering. Stitching shall be done in straight line. No wrinkels along the stitching line and no pin holes. The joint between side and seat shall be in straight line. The seat shall be seperate from the structure and upholstered from all sides with the approved fabric/leatherite. Wooden legs to be provided under the sofa.
2
-
-
Providing & Placing oval shaped top center table with first class solid teak wood frame with 10mm thick beveled edge toughened glass top & 20mm thick veneered ply bottomcompartment to be provided.
Polishing and Varnishing – General Holes and indentations on surface shall be filled with putty made of whiting and linseed oil. The pad shall be moistened with polish and rubbed hard on the surface applying the polish sparingly but uniformly and completely over the entire surface. Another coat shall be applied in the same way after the first coat has dried sufficiently. Finishing coats shall be sprayed on the surface in 2 coats or as required till the satisfied result, using melamine polish of approved make. Application of extra coats shall not charged extra.complete as per the approved.
The products should be as per BIFMA standards. The boards used sholud meet international standards of quality and safety, indian standard IS 12823 grade II should meet long time loadbending , screw - withdrawl strength and moudulus rupture and modulus of elasticity bending test as per IS 2380 (Part 4 ,Part 13 and Part 14). complete as per the approved sample/image/ shop drawing by supplier and as per the direction of Architect & Engineer-In-Charge. (L)1200x(W)600x(H)450
1
-
-
Providing & placing/fixing Auditorium chair as per the below specification. Sheet metal frame:- Foot is made of HR sheet of the size 125*300*4mm, the foot pipe is of 38mm×78×2mm. The back frame & base frame are made of C.R. pipe of the size ( 19x 2mm)T.H of ERW tube IS : 30748 1976 grade I. These frames are embedded (not pasted) to P.U. Foam. In precise frames are inbuilt in foam. The back & base frame supports Zigzag spring for swinging comfort. P.U foam:- Polyurethane foam used is close cell formation, high pressure with CFC free quality. Density = 50+ 5kg/m3 JISK 6401, Hardness = Cushion = 120 (+30/-20) Newton. Backrest = 80 (+30/-10) Newton, Constant Compression Set(max :- -13%) JISK 6401)P.U foam measurement:- Base Cushion: L × B × TH = 550x500x130 (in mm) Backrest: L × B × TH = 690x500x50 (in mm) The foam must have a depth of 45mm at shoulder area and depth gradually decreases to 15mm at bottom. The back foam has a unique built head rest for real comfort and enhancing rich grand looks. P.U foam happens to be the most critical part of the chair; hence it is very important to maintain density, hardness & overall quality of the foam. Powder Coating:- The frame is well powder coated with prior 7 tank. Phosphating treatment & 70 to 80 microns of powder coating. Cloth upholstery :- Fire retardant cloth with 3mm high density lamination (cost Rs. 200 per meter) is used . Back Cover: - Back foam is covered by matching soft cloth . Plastic back cover (P.P.C.P) is optional. Row numbers & Aisle light: - Row no. is well placed on P.P.C.P. cover of base. The side panel should support row no. & aisle lights for illumination. Teak wood handles :- Handles without cup holder with PU polish finish. Moving mechanism : - This chair has synchronous movement of back & base. The mechanism is popularly called scissor mechanism. The sliding movement can be achieved as desired by the customer and space available. (4” to 6”). The base can be manually tip-up.
40
-
-
Providing and fixing of modular storage made of 18mm thick three layer pre-laminated particle board of grade II Type III of IS 12823 designation PLB 23 of approve decorative color laminate in swede/matt finish on front. Opennable /swing door storage with hindges, ss finish handels and Front multi purpose lock , adjustable shlef for keep file according to user comfortability . Distributed load capacity of shelf should be 35kg . complete storage made of 18mm thick prelaminated particle board. .Complete storage shall be have knock down system . all fat edges duly sealed with 0.8/1/2mm thick machine pasted PVC beading. The products should be as per BIFMA standards. The boards used sholud meet international standards of quality and safety, indian standard IS 12823 grade II should meet long time loadbending , screw - withdrawl strength and moudulus rupture and modulus of elasticity bending test as per IS 2380 (Part 4 ,Part 13 and Part 14). complete as per the approved sample/image/ shop drawing by supplier and as per the direction of Architect & Engineer-In-Charge. Size of (L)750x(W)450x(H)1200
2
-
-
Providing and fixing of modular storage made of 18mm thick three layer pre-laminated particle board of grade II Type III of IS 12823 designation PLB 23 of approve decorative color laminate in swede/matt finish on front. Opennable /swing door storage with hindges, ss finish handels and Front multi purpose lock , adjustable shlef for keep file according to user comfortability . Distributed load capacity of shelf should be 35kg . complete storage made of 18mm thick prelaminated particle board. .Complete storage shall be have knock down system . all fat edges duly sealed with 0.8/1/2mm thick machine pasted PVC beading. The products should be as per BIFMA standards. The boards used sholud meet international standards of quality and safety, indian standard IS 12823 grade II should meet long time loadbending , screw - withdrawl strength and moudulus rupture and modulus of elasticity bending test as per IS 2380 (Part 4 ,Part 13 and Part 14).
complete as per the approved sample/image/ shop drawing by supplier and as per the direction of Architect & Engineer-In-Charge. Size of (L)600x(W)400x(H)1200
2
-
-
Providing and placing ergonomical, comfortable and aesthetically design high back chairs. The seat size shall be 500mm (W) x 500mm (D) and the back size shall be mm 500(W) x 550mm (H) (Seat to back height). The seat and back shall be made of hot pressed moulded double layered plywood 16mm thk and Urethane foam upholstered (Foam density 40kg/m3) with Synthetic leather tapestry. The back shall be Urethane foam upholstered (Foam density 32kg/m3) with Leatherite tapestry. The armrests are made of CRC pipe 50mm X 15mm X 1.6mm chrome plated and cushion with foam and Synthetic leather tapestry. The mechanism shall be 360 degree revolving Torsion bar with single point locking and tension arragment. The pneumatic height adjustment shall have an adjustment of 65mm BIFMA Standard class 3. The pedestals shall be made of HR steel 1.2mm thk, chrome plated fitted with 5 nos. twin wheel castors. The pedestal dia shall be 65+/-0.5cm and the pitch centre dia shall be 75+/-1cm (with castors). The twin wheel castors shall be injection moulded in black nylon.
12
-
-
Providing & fixing of puppets hanging in ceiling with help of Stainless Steel wire complete as per design & drawing and directions of Architect Consultants
80
-
-
Painting or mural in any medium on canvas or wall surface painting, etc. works symbolizing local cultural heritage & history of the place
64.8
-
-
Providing and fixing of cave structure to be made with 100x50mm timber battens frame covered with wire mesh and POP for undulated rocky surface with wall painting provision for one display screen and 1200mm wide 1800mm high opening on one side. Entire structure to be finished with matte finish paint complete as per design, drawing and as directed by incharge.
19.5
-
-
Providing & Fixing Acrylic solid surface of approved make for inner/outer side of shutters with adhesive complete as per approved by engineer in charge.
32.4
-
-
Providing and fixing of 400mm deep plywood frame finished with 6mm thick Acrylic solid surface on all exposed sides. 5 layers of 3mm thick onyx lasercut as per design to be placed c/c 50mm in between and fixed on the plywood frame with metal clamps. The whole setup to give a look of a paper cut pop up book with provision for incorporating concealed speakers, sniff boxes, sensors and textured material as per design, drawing and direction of architect in charge.
183.17
-
-
Providing and fixing pyramidical frame 4350mm x 4550mm x 2500mm in SS wire 10mm diameter, fixed on skylight with required fasteners as per design, drawing and direction of architect in charge.
1
-
-
Providing and fixing of assorted mix of wooden masks randomly displayed on panelled wall with brass hooks as per direction of architect in charge.
100
-
-
Providing and fixing Wooden venetian blinds, Made of Hard wood Wooden slats size 50x2.7 mm with headrail roll formed steel U section 51x57 mm bottom rail same wood species as the wooden slats. The wooden slats natural finish with polyurethane lacquer polish. Mounting with steel swivel brackets including all fixtures and fittings complete in all respect as per directed by engineer-in- charge
53.42
-
-
Providing and fixing Horizontal blinds /Venation blind shall be cold rolled formed U shape 23 mm high x 25 mm wide with flanged adages. It shall be made of heavy gaze 0.56 mm galvanized steel, Slates shall be made of virgin Al. alloy (having 3.5 – 4.5% of Mg. Content of width 25 mm. The slat shall have dust guard paint coating, the cord lock shall be of thick tomized steel and shall be securely attach in the head rail. It shall provide locking arrangement of the cord. Tilt rod shall be made of galvanized steel it shall have a D shaped with an average cross section with diameter of 6 mm to achieve minimum torsional deflection.
61.06
-
-
Providing & fixing display cabinet 700 mm deep to be made using 18 mm Ply fornt & Back finished with 1 mm laminate finish outside. Front glass to be extra clear 8 mm thick laminated toughened to be fixed with 25x50mm thick First class teak wood member & back side support 100x50 mm thick vertical & horzintal including required teak wood mounding, beading including antitermite treatment as per suitable size complete with required hardware, fittings complete as per design, drawing and as directed by incharge.
21.76
-
-
Providing & fixing of Architectural Model of Natioal various types of library size of 1500mm (Lenght) x1800 (Width)x1080mm (Height) scale as per building site with specifications . •High Intense poly styrene sheets, acrylic sheets, plastic sheets, PVC sheets, MDF, HDF sheets (pine), wood board , models made by 3D printing; like sculptures and other similar details;• Use of high intense poly styrene and Acrylic sheets for block models;• Use of dot sprayer and engraving technique for textures and paints; ground grass covers, pool sheets water texture and other imported elements used mainly in landscaping like sculptures, pots, gazebos, etc.;• Paint- Use of Nitro Cellulose based primer for base coatings; Use of Auto Lacquer Duco Paints for elements; Use of emulsion colors for buildings for final coating according to the color code provided, with the primer Coating, model cover with 8 mm toughened glass with Ozone and Icon brands fitting, model lighting Street lighting and landscape & landscape lighting system for model; Detailed Block lighting system for illuminating the block through openings for special effects; Basic Landscape development, Installation of music system, Push Button Controlmodel base made of BWP/BWR grade ply borad with Pu finish coating, model is to be enclosed complete as per drawing & design and direction of Engineer- in - charge.
3
-
-
Providing and fixing wall panelling using aluminium frame of size 50x100mm @600 mm c/c in both directions duly treated cladding 6 mm thick ACP (Aluminium Composite Panels) complete with required hardware Screw complete as per design, as directed by engineer incharge
528.84
-
-
Providing & fixing 4500 mm depth display pedestal to be made of 18mm BWP plywood with 6mm Acrylic solid surface finish on all sides and top 18mm supports inside . Glass (470mm high) to be extra clear (5+5+1.5)11.5 mm thick laminatedtoughened Glass to be fixed with 50x100 First class teak wood member finished with Acrylic solid surface including required Ghana teak wood mounding, beading including antitermite treatment complete with required hardware,locks, powder coated brass fittings complete as per design, drawing and as directed by incharge . front area to be Measured
7.36
-
-
Providing and fixing of Signage, caption, Digital printed on 3M make vinyl with lamination in matt finish. mounted on 3mm foam board (Sun board) fixed on existing wall or paneled wall surface complete as per design, drawing and as directed by incharge.
30
-
-
Providing and fixing of Signage, caption, photograph Digital printed (UV) on 3M make vinyl with lamination in matt finish. mounted on existing wall or paneled wall surface complete as per design, drawing and as directed by incharge.
981.65
-
-
Providing & fixing 200mm depth backlit panel to be made using 25mm Plywood on the back with led light module panel . Front side 8mm thick toughened extra clear with 2mm thick acrylic diffuser sheet pasted in 1mm thick vinyl print fixed on the inner side sandwich panel. Glass to be fixed with 60x175mm First class teak wood member including antitermite treatment finished with 6mm thick Acrylic solid surface complete with required hardware & fittings complete as per design, drawing and as directed by incharge.
44.64
-
-
Providing and fixing of Emergency Signage luminescent vinyl printed in on 4mm thick acrylic sheet back and 4 mm thick acrylic front sandwich panel , as per International standard signage graphic, mounted on Stainless Steel studs of complete as per drawing & design and direction of Architect consultants.
6.84
-
-
Providing and fixing of museum gallery & direction Signage, 10 mm thick toughened glass with etching as per provided design, as per International standard signage graphic, mounted on Stainless Steel studs of complete as per drawing & design and direction of Architect consultants.
18.86
-
-
Providing and fixing of museum gallery & direction Signage, 10 mm thick toughened glass with etching as per provided design glass hanging on ceiling help of Havey Duty stainless steel wire of complete as per drawing & design and direction of Architect consultants.
1.35
-
-
Providing and fixing of museum gallery & direction Signage 6 mm thick ACP (Aluminium Composite Panels) lesar cut letters. background of minimum 10 mm thick acrylic & 12 mm Plywood board mounted on walls using 25 mm dia Stainless Steel studs complete as per drawing & design and direction of Engineer- in - charge.
5.4
-
-
Sitc of led track B4:B16xture optical system should consist of collimation lens and snoot type retractable screen. The spotlight offers the ability the ability to expand or focus the opening of the beam of light, through a gentle manual movement. The fixture with the help of user manual action, the lens and the snoot act as a zoom allowing the adjustment of the light beam angle from "Spot" to "flood". This spolight ideally helps in precision of the beam light is useful for museum/ exhibition or accent lighting application.The fixtures comes in 12w with approx 1310lm comes with beam angle adjustment from 12-55 deg. color temp available 2700k/ 3000k / 4000k with CRI90. finishes options black / white . input voltage is 220/ 240v. the fixture comes with a Swivel of 180 deg and rotation of 355 deg.
55
-
-
Sitc of led track light fixture with multiple leds combined with individual lenses to create uniform and clean light effects. the fixtures comes with the flexibility to change the beam at site with the help of microlenses can be put in front of the luminaire and should not change the visual appearance of the fixture and also comes with on board dimming option to choose from. the fixtures comes in 23.1w with approx 2390lm comes with 14 Deg as standard beam angle and give flexibility to choose beam angle from 26 Deg / 47 Deg / Wall Wash optics. color temp available 2700k/ 3000k / 4000k. finishes options black / white . input voltage is 220/ 240v. the fixture comes with adjustability of 0-90 deg and rotation of 355 deg.
20
-
-
sitc of 3 phase Suspended track for the above fixtures inclusive of all accessories
90
-
-
Minimal Track is a low voltage (24V) surface track system, where the miniaturization of the profile, luminaires and components reaches a new paradigm. Its ultrafine design is perceived as a minimalist line on the ceiling, creating a trimless visual effect
15
-
-
Sitc of projector for the Track system that offers the possibility of expanding or concentrating the beam light with just a smooth manual gesture. This characteristic . Plus the ideal alternative for applications where the precision whithin the beam of light is essential.. The fixtures comes in 4.1w with approx 500lm comes with beam angle adjustability from 10 - 35 deg. color temp available 2700k/ 3000k / 4000K with CRI 90. finishes options black / white . input voltage is 24V. the fixture has dimensions of 33 mm dia with height of 65mm comes with Swivel of 180 deg and rotation of 355 deg.
30
-
-
SITC of Surface mounted Linear LED Rigid Module with housing made of aluminium profile with integrated LED light source and frosted acrylic diffuser. The fixture comes in 10W/m with approx 690lm ,color temp available 2700K/ 3000K/ 4000K. Beam Angle to be diffused with High CRI . IP 20 Version.
60
-
-
SITC of led linear Surface mounted uplighter optical system composed of a series of equidistant light sources. the deep-set tir lens guarantees high-quality light emission and visual comfort; cri colour rendering index: 80; body material: body made of aluminium made from an extruded profile, screen material: 4-mm-thick tempered, transparent extra-clear glass. The fixture height should not excced more 70mm ingress protection: IP65 ; impact resistance: ik06; protection systems:wattage is around 08-10w from max 600mm length with different beam angle to choose from 12/20/36/ 45/60/90/120/ elliptical, color temp reqd is 3000K. Input Voltage 24VDC
44
-
-
SITC of. 1.8mtr Customised circular Direct view LED luminaire dia using linear SMD light sources with a power supply integrated in the product. The luminaire body is made from extruded aluminium and consists of sectors that are joint together with diecast connectors which also act as the mounting points for the suspension wire. The luminaire is fitted with a PMMA diffuser and is available in matte white or matte black powder coating finish. Ingress protection of IP20. The fixture Wattage should not exceed more than 35W in 3000k color temp.
1
-
-
SITC of LED surface mounted flood light fixture with multiple leds combined with individual lenses to create uniform and clean light effects. the fixtures comes with the flexibility to change the beam at site with the help of microlenses can be put in front of the luminaire and should not change the visual appearance of the fixture high strength toughened glass resistant to impact and friction. The fixture should be approximately 23W in 2700/ 3000 / 4000 K or as per consultant requirement. The fixture should have variation beam angles to choose from i.e 14/ 24/ 36/ 45 / 60 / Wall wash as per site requirement. Fixture should have ambient temperature of - 25 Deg C - 50 Deg C.
10
-
-
SITC of LED surface mounted flood light fixture with multiple leds combined with individual lenses to create uniform and clean light effects. the fixtures comes with the flexibility to change the beam at site with the help of microlenses can be put in front of the luminaire and should not change the visual appearance of the fixture high strength toughened glass resistant to impact and friction. The fixture should be approximately 50W in 2700/ 3000 / 4000 K or as per consultant requirement. The fixture should have variation beam angles to choose from i.e 14/ 24/ 36/ 45 / 60 / Wall wash as per site requirement. Fixture should have ambient temperature of - 25 Deg C - 50 Deg C.
10
-
-
Sitc of led surface mounted Single head adjustable led spot, the fixture has flexibility of adjustability from 0-90 deg and rotation of 355 deg within the same fixture. the body is made of die cast aluminium in white or black finish with internal black and white tube option to choose from. the fixture comes 8.6w with approx. 1060lm delivered, color temp available 2700k / 3000k / 4000k as per site requirement, beam angle option:- 20 deg with input voltage of 220-240v . .
20
-
-
Sitc of led surface mounted twin adjustable led spot, the fixture has flexibility of adjustability from 0-90 deg and rotation of 355 deg within the same fixture. the body is made of die cast aluminium in white or black finish with internal black and white tube option to choose from. the fixture comes 8.6w with approx. 2186lm delivered, color temp available 2700k / 3000k / 4000k as per site requirement, beam angle option:- 20 deg with input voltage of 220-240v . .
20
-
-
Sitc of led recessed linear downlighter with wall wash optics, the fixture is engineered which resultsin evenly lit wall from floor to ceiling. wattage of the fixture is 10w with cri90 with approx 1000lm, color temp available is 2700k / 3000k / 4000k with dimensions of length 220mm x 40 mm width x 50 mm depth.
10
-
-
SITC OF Flexible led strip for linear lighting with dynamic LED, it can gradually go from 2200K to 6000K. Dissect able with set interest every 10 cm for the 24volt.3M adhesive tape on the back. The dual cable header allows for faster series connection.3 MacAdam StepsThe high density of LED (120 chips per meter) allows homogeneous lighting on all surfaces. The complete fixture comes with aluminium for thermal dissipation. The fixture wattage 24W/m in 2200-6000k with approx 7500lm in IP20
380
-
-
SITC of flexible linear system for indirect illumination which is stretched between two walls that will allow you to illuminate the space. The fixture is composed of two joints that can be installed on two walls, between which the steel strip is stretched and where the LED strip will be applied. The joints are rotatable, thus giving the possibility to orient the strip in different angles and create different light cuts. It is also possible to adjust the joints to better stretch the steel strip and create perfectly straight line of light. The wattage can go max up to 28W/m in 3000k or as per requirement. Runs on 48v DC
12
-
-
Labour charges for Removal of electrical wires/cables/CCTV wire both in external and internal elevations (includes tube lights, switches, switch board, light fixture, lamp ceiling /exhaust fan, Air condenser, PVC conduits, lines ,bulbs, cctv camera etc.), and refixing of lamps as directed by Engineer inchrge/ Architect, and including all leads, lifts and carriage. All complete.
1
-
-
Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. 2 x 1.5 sq.mm
300
-
-
S&F following sizes of ISI marked ( IS:14927 P - II ) PVC casing capping along with accessories like coupler, inner, outer, elbow, square box, tee etc. on surface with screws, expansion fasteners as required. 50 mm x 50mm
300
-
-
S&F following sizes (dia.) of ISI marked ( IS:9537 P - II ) rigid steel conduit along with accessories in surface / recessed using saddles, clamps, fastener pvc bushes, check nuts, as required including cutting the wall and making good the same as required.
-
-
-
20 mm
250
-
-
25 mm
350
-
-
40 mm
200
-
-
50 mm
600
-
-
Supply, Installation, Testing & Commissioning of ONVIF S/G Profile 5MP PoE True IP 30 mtr IR Motorised Varifocal lens Dome Camera : Outdoor 5MP PoE True IP IR Dome Camera with latest H.265 Compression with 1/2.8" CMOS Sensor with built in IR Illuminator 30 Mtrs having automatic varifocal lens from 3.2 to 10 mm lens with autofocus for both day/Night operation with Camera Built In Video Analytics like as Auto Tracking, Line Crossing, Enter/Leave Field, Follow Route, Loitering, Idle/Removed object, People counting, crowd density and 3D tracking.Camera should have UL, CE, FCC certification with IP 66 and IK10 impact protection. The camera, software, storage should be of the same make for seamless integration with each other Model No. IMP231-1ERS
64
-
-
Supply, Installtion Testing & Commissioning of 30X IP IR ONVIF S/G Integrated Pan,Tilt, Zoom Camera: 30X IP IR Integrated Pan,Tilt, Zoom Camera with latest H.265 Video Compression with intelligent stream management capability for Bit rate optimization and storage management with 1/2.8" Progessive Scan CMOS sensor having lens of 4.5mm to 135mm (F1.6-F4.4) with optical zoom field of view from 2.4°−60.9°. Camera should have Essential Video Analytics like as Any Object, Object in field, Crossing line, Loitering, Following Route, Idle Object, Counter, Occupancy, Condition Change, Following Route etc., The camera, software, storage should be of the same make for seamless integration with each other
6
-
-
Supply, Installation, Testing & Commissioning of VMS central storage server supported up to 180 channels on single hardware platform along with RAID 5 protection with complete video management solution having inbuilt storage of 192 TB with advance user and alarm management with having bandwidth capacity of 550mbps, HDD supported up to 12TB with Intel Xeon processor E3-1275 V3 having 8MB cache, 3.5 Ghz with 2X120GB SSD drive for OS having RAID 1 Configuration with 8 port LSI 3108 SAS3 Card controller with DVD writer having fron 2USB 2.0 Port and Rear 2USB 2.0 ports, 2 USB 3.0 port with Dual intel Gigabit LAN ethernet card The camera, software, storage should be of the same make for seamless integration with each other MAF: Tender Specific OEM authorisation is mandatory for bid consideration
1
-
-
Supply, Installation, Testing & Commissioning of Base Licence for Cameras
1
-
-
Supply, Installation, Testing & Commissioning of Channel Licences
70
-
-
Supply, Installation, Testing & Commissioning of Mobile Viewing Licences
3
-
-
SITC of Cabling, Networking with Racks, PoE Switches, Display, power Cabling, Labour, etc (per camera)
70
-
-
SITC of Pole for mounting of Camera, etc (per camera)
6
-
-
SITC of 55" LCD panel with 3840 X 2160 resolution or better, USB playback,bluetooth and meracast connectivity,4X HDMI 2.0,DP1.2, HDR10,500 nits or better, Video wall mode should be available, contrast ratio : 1200:1, OPS slot,should have 178 degrees viewing angle complete with mounting and accessories.
3
-
-
Interactive book projection using projector mounted vertically above the book should be complete with sersors and application. 1-chip DLP LASER Phosphor Multimedia Projection system having, 7000 Lumens 20000 hours lamp life, 1920 x 1200 WUXGA Native Resolution, Inbuilt blending and warping with automatic caliberation software, 3D ready, 1200000:1 Contrast Ratio, inputs: HDBaseT,HDMI2.0, DVI-D, Active 3D, Motorised zoom and focus, alongwith 1.25-2.0 lens & projector mountin bracket etc. complete with installation as per the site requirement
1
-
-
98" Touch panel. 98" LCD touch panel with 3840 X 2160 resolution or better, USB playback,,4X HDMI 2.0, brightness 500 nits or better, Video wall mode should be available, 10 point touch, contrast ratio : 1200:1, OPS slot,should have 178 degrees viewing angle complete with mounting and accessories. will include gesture based interaction control.
2
-
-
Interactive DLP Solid state(Laser Phosphor) Projection system with ultra short throw lens maximum throw ratio 0.25 UST having 5000 Lumens, 3D available, 1920 x 1200 Resolution,1800:1 Contrast Ratio, illumination Life 20000 hours, Inputs: HDMI, HDBaseT should be complete with mountin bracket etc. will include gesture based interaction control.will also include touch based interaction on projected wall
11
-
-
Holographic setup on a single glass panel. 12' height, touch screen for content selection. All hardware and software and accessories.
1
-
-
86" Touch panel. 86" LCD touch panel with 3840 X 2160 resolution or better, USB playback,,4X HDMI 2.0, brightness 400 nits or better, Video wall mode should be available, 10 point touch, contrast ratio : 1200:1, OPS slot,should have 178 degrees viewing angle complete with mounting and accessories.
6
-
-
Supply, Installation, Testing & Commissioning of Touch screen led display 55"size FHD resolution or higher with 10 point touch projected capacitive technology with 5 ms response time toughened glass top with cpu intel i5 processor 8gb ram 1 tb hdd windows 10 pro with including software & mounting frame on heritage table .
10
-
-
Interactive Touch 65" LCD panel with 3840 X 2160 resolution or better, USB playback,bluetooth and meracast connectivity,4X HDMI 2.0,DP1.2, HDR10,500 nits or better, table top mode should be available, contrast ratio : 1200:1, OPS slot,should have 178 degrees viewing angle complete with mounting and accessories.
2
-
-
1-chip DLP LASER Phosphor Multimedia Projection system having, 9500 Lumens 20000 hours lamp life, 1920 x 1200 WUXGA Native Resolution, Inbuilt blending and warping with automatic caliberation software, 3D ready, 1200000:1 Contrast Ratio, inputs: HDBaseT,HDMI2.0, DVI-D, Active 3D, Motorised zoom and focus, alongwith maximum 0.65-0.75 lens & projector mountin bracket etc. complete with installation as per the site requirement. This should also include touch screen panel maximum 24" and blending calliberation software and hardware.
3
-
-
Supplying of Display media server with HD outputs as required , synced together. It should be capable of capturing content. Original windows 10 embedded with i7 six core CPU with Rugged cooling system. with 16GB RAM, 2 nos 512 SSD drives raid 0 drives for media playback , 1 nos. 256 GB SSD for operating. It should also have genlock and framelock capability. Should also have Art-net Ethernet in/out. to complete the job with all respects.
8
-
-
Supplying of showcontrol and 3D Projection mapping software, Playback control System to manage, schedule and control the media severs. It should have direct control on inputs and media timelines. It should have an option of being controlled by an external unit integrated with the software. to complete the job with all respects.
32
-
-
Supply, installation, testing and commissioning of 2-way IP55 rated (as per IEC 529) indoor/outdoor surface mounted music and PA loudspeaker. The louspeaker shall meet the following performance criteria: Usable Frequency range (-10dB) of 75Hz to 20kHz; Power handling of 100Watt peak; Nominal dispersion of 135°(H) × 135°(V); Sensitivity of 84 dB SPL and Max SPL of 104 dB SPL peak; Nominal impedance of 8 Ohms with an Integral multi-tap Transformer with selectable tap settings of 6/12/25W@100V or better. The loudspeaker system shall be comprised of a powder-coated aluminum grill; 3.25-inch weather-treated woofer and 0.75 inch neodymium dome tweeter coaxially mounted enclosed in engineered-plastics with an In-built waveguide designed to provide uniform area coverage across the loudspeakers frequency range. UL-1480A rated
40
-
-
Sound Bar Multipoint Connectivity HDMI (ARC ,Audio Jack,Optical Cable Port
1
-
-
Supply, installation, testing and commissioning of Wall mountable IPX5 (as per IEC 529) with twelve full range drivers in an articulated array for wide dispersion. The louspeaker shall meet the following performance criteria: Usable Frequncy Range (-10 dB) of 58Hz - 16 kHz. Long term power handling of 150 Watts. The Loudspeaker shall have a Max. SPL (Peak) of 118 dB with a norminal dispersion of 160° H x 20° V. The loudspeaker system shall be comprised of a Powder-coated aluminum grille; Twelve 2.25-inch weather-resistant drivers and a norminal impedence of 8 ohms. Optional 70/100V OEM transformer module with tap settings of 100/50 W shall be available.
7
-
-
SITC of conferencing digital audio DSP with 32-bit fixed/floating-point DSP 456 MHz/ARM Cortex-A8 600 MHz processor or better with following features and specifications are required. The DSP shall have 12 balanced inputs and 8 balanced output channels for microphone or line-level analog audio signals, each independently controllable . The DSP shall contain 12 channels of acoustic echo cancellation (AEC), with multiple references, routable to analog and/or Dante® inputs. The DSP shall have Dante digital audio networking up to 64 x64 channels, an Ethernet connection for control and programming on an RJ-45 jack and VoIP connection for 2 lines, GPIO – 5x5 expandable general-purpose contro, PSTN and USB audio and 8 digital channels on an RJ-45 jack.It shall have IT web configuration page, USB Port – Micro-B USB for PC soft codecs with stereo input and output, ultra-low latency digital audio, Serial Port – 3-wire RS-232C (DTE) serial interface connection.It shall Supports remote zone controllers , PSTN (RJ-11) – Supports worldwide analog telephone connection, Dynamic Range 115 dB, A-weighted 20 Hz – 20 kHz; THD : 0.002 % or better ,Maximum Input Level +24 dBu; Phantom Power +48 VDC, 10 mA, selectable per input. The audio DSP shall include configurable signal processing, signal routing and mixing, equalization, filtering,dynamics, delay, conference room router, conference room combining, as well as control,monitoring, and diagnostic tools. The audio DSP shall control and proxy all expansion devices and other Dante endpoints.
4
-
-
Supply, installation, testing and commissioning of 2-way IP55 rated (as per IEC 529) indoor/outdoor surface mounted music loudspeaker. The louspeaker shall meet the following performance criteria: Usable Frequency range (-10dB) of 65Hz to 20kHz; Power handling of 200Watt peak; Nominal dispersion of 130°(H) × 130°(V); Sensitivity of 87 dB SPL and Max SPL of 110 dB SPL peak; Nominal impedance of 8 Ohms with an Integral multi-tap Transformer with selectable tap settings of 6/12/25/50W@100V or better. The loudspeaker system shall be comprised of a powder-coated aluminum grill; 5.25-inch weather-treated woofer and 1-inch neodymium dome tweeter coaxially mounted enclosed in engineered-plastics with an In-built waveguide designed to provide uniform area coverage across the loudspeakers frequency range. UL-1480A rated and shall be packed in pairs.
8
-
-
Supply, installation, testing and commissioning of 2-way IP55 rated (as per IEC 529) indoor/outdoor surface mounted music loudspeaker. The louspeaker shall meet the following performance criteria: Usable Frequency range (-10dB) of 59Hz to 20kHz; Power handling of 400Watt peak; Nominal dispersion of 120°(H) × 120°(V); Sensitivity of 88 dB SPL and Max SPL of 114 dB SPL peak; Nominal impedance of 8 Ohms with an Integral multi-tap Transformer with selectable tap settings of 5/10/20/40/80W@100V or better. The loudspeaker system shall be comprised of a powder-coated aluminum grill; 6.5-inch weather-treated woofer and 1.25 inch neodymium dome tweeter coaxially mounted enclosed in engineered-plastics with an In-built waveguide designed to provide uniform area coverage across the loudspeakers frequency range. UL-1480A rated .
6
-
-
Supply, installation, testing and commissioning of floor / surface mounted Subwoofer. The louspeaker shall meet the following performance criteria: Usable Frequency range (-10dB) of 35Hz to 125kHz; Power handling of 1000Watt peak; Nominal dispersion shall be omnidirectional; Sensitivity of 90 dB SPL and Max SPL of 120 dB SPL peak; Nominal impedance of 8 Ohms with an Integral multi-tap Transformer with selectable tap settings of 40/80/150W@100V or better. The loudspeaker system shall be comprised of a powder-coated steel grill; 10-inch woofer enclosed in high-density wood composite. UL-1480A rated.
4
-
-
Supply, installation, testing & Comissioning of 4 channel class D Power amplifier with a Max Output Power of 4 x 500W@ 4 ohms, or bridged mode output power of 2 x 1000W @ 8 ohms/70/100V. 20Hz - 20 KHz, SNR of 101dB and THD + N of 0.4% with built in protection such as Limiters, Temperature, DC, Short Circuit, Peak Current Limiters, Turn on delay etc. Built in DSP for Matrix routing, Speaker equalization, Delays, Array EQs etc with Ethernet Port for Network Control, programming and monitoring.Analog input sensitivity for rated output: 0, +4, +12 and +24 dBu, user selectable; The amplifier front panel shall contain a user interface with a 240 x 64 LCD primary display, with LED indicators for signal present, input clipping, output limiting and fault. Functions accessible from the front-panel interface shall include output configuration, fault logging, mute, input sensitivity selection, output attenuation, EQ on/off per channel and loudspeaker processing preset recall.The Damping factor shall be 1000. The amplifier shall implement Dual Voltage and Current feedback technology to provide power as per the load demand. Shall offer optional Network audio connectivity (Dante) through expansion slot. Warranted for at least 5 years.
4
-
-
Supply, installation, testing & Comissioning of AVR 7.1
2
-
-
Equipment Rack - 42U Rack Frame/600X800/Steel/NRS1/ CKD/Casters Type 2,Levellers,Server /IT Rack mount power distribution unit, 1Ph, 230V, 32A, 50/60Hz, Zero U standard with 12 X Indian Round Pin 5/15A, (Inlet Plug Not Installed, Recommended IEC30932A 2P +E), 16A MCB X 2 Circuits- PDU Rating 7.3KVA/Bottom feed-3Mt/ Black ,ITE / Server Rack Air Circulation module/Tower Mount/360CFM,Mounting Hardware-CR (Pack of 20)
1
-
-
8 x 10/100/1000T ports (POE) 4 x 100/1000x SFP Industrial L3 Switch
1
-
-
8 x 10/100/1000T ports (POE) 2 x 100/1000x SFP Combo Industrial Managed Switch
4
-
-
1000BaseLX SFP (10km)
10
-
-
LIU Single Mode with Piggtail and Adapter (Patch Panel for 12 core with inbuilt pigtails) The 1U Multi‐Function Fibre Enclosure is a configurable rack mount unit for storing and terminating incoming fibre cable. The fibre enclosure has been designed to accommodate various termination types and adapter configurations The enclosure must, have a sliding drawer for ease of reconfiguring fibres,
incorporatesa heavy duty ballbearing slidemechanism,allow in geasy accessto fibres Thead apter plates ustbeaninterchangeablefrontplate which can facilitates upgrades as & when required. Theenclosure/LIU should have lockstosecure al lthe fiberter minations &must have front cable management to properly route patch cords. Fibre management enclosures that can be used as a wall mount enclosure for isolated applications or rack mount enclosure for integrated applications. 1.75 inches The LIU must be upgradable up 96 ports LC Style 482mm W x 254mm D x 43mm H( Rackmount) 305mm W x 254mm D x 43mm H (Wallmount Powder coated Mild Steel .
10
-
-
Type of connectors SC or LC LSOH Jacket ‐ Reduces toxic / corrosive LengthMinimum 1 meters Polishing100% Factory polished and tested Insertion LossLess than 0.3dB per connector Attenuation3.5dB/km @ 850 nm & 1.5dB/km @ 1300nm StandardsROHS Compliant Jacket colourIndustry Standard Colour ‐ OS1‐Yellow Make and TypeSC to LC Duplex Fiber Optic Patch Cord 50/125 Micron Cable SheathLSZH Cable Diameter1.6 mm FerruleCeramic BufferTight buffered
Temperature Range.‐40 Degree C to +85 Degree C Buffer Diameter:900μm
Primary Coating :245μm Strength Member:Aramid Yarn Jacket Material:LS0H IEC 61034‐1 & 2, IEC‐60332‐1, IEC‐60754‐ 1 & 2.
10
-
-
Fiber Optic Single Mode 12 core outdoor Outdoor unit‐tube gel free 9/125 micron OS2type optical fiber. Cable containing up to 12 optical fibers in loose tube, sheathed in HDPEmaterial,Protected by ECCS tape
Single Mode, 9/125 micron primary coated buffers, OS2 (IEC60793‐2‐50,B1.3andITUT G652.d). Polybutylene, Terephthalate (PBT) White 3.0/2.0 mm nominal OD/ID 4/6/8/12 Blue, Orange, Green, Brown, Slate (Grey), White,Red, Black, Yellow, Violet, Pink, Aqua Water Swell able Yarn to prevent water ingress in loose tube Corrugated Steel Tape Armour (ECCS Tape)Thickness 0.125mm Polyester based yarns below armoured tape for easy ripping HDPE out Jacket Black.
3000
-
-
Speaker Cable 4sqmm armoured 2 core CABLE DESCRIPTION - 2 core X 4.00 Sq. mm (128/.20mm) ATC Copper conductor PVC Insulated, PVC inner sheath, G.I. wire (0.9 mm) Armoured,Over all PVC Sheathed Speaker Cable. PHYSICAL SPECIFICATIONS:- • Cross Sectional Area : 4.00 Sq. mm,• No. of Strands : 128 Strands • Size of Strand : 0.20 mm / 36 SWG / 32 AWG• Conductor Type : ATC Copper • Core Diameter : 4.20 mm• GI wire : 0.9 mm• Insulation Type : PVC Compound • Outer Sheath Type : PVC Compound• Overall OD : 14.70 mm + 0.20 mm TECHNICAL SPECIFICATIONS:-
• Operating Voltage : 1100 Volts• Current Carrying Capacity : 26 Amps. • Nominal Capacitance- Cond. / Cond. : 62 pF / Feet- Cond. / Shield : 165 pF / Feet • Nom. Cond. DC Resistance- Conductor : 4.88Ω / Km at 20º C ELECTRICAL PROPERTIES • Volume resistivity : 1x1014 ohm / cm at 27 0 C• Dielectric constant : 3.9 at 1000 Hz
1500
-
-
Cat 6 U/UTP 4 feet End‐to‐End Solution and are designed to support data networks for10/100BASE‐T and 1000BASE‐T applications,24 AWG stranded copper wire,5.9mm LS0H,4X O.D.,Transparent Plug with anti‐snag slip on boots ISO/IEC 60606‐7‐4 and FCC 47 Part 68,Fire Propagation compliant with CSAFTI,IEC60332‐1, IEC 61034‐20°C to 60°C,: 750 insertion cycles,Clear polycarbonate,0.35mm thick copper alloy,Selective gold,ISO/IEC 60603‐7‐4 and FCC 47 Part 68,ISO/IEC 11801:2002/Amd 2:2010 Cat 6‐, TIA‐568‐C.2 Cat 6,UL/ETL Verified LS0H Sheath: CSA FT1, IEC 60332‐1, IEC 61034,0.5mt to 10 mt
10
-
-
SITC of KNX power supplies 640 mA generate and monitor the KNX system voltage (SELV). The bus line is decoupled from the power supply by an integrated choke. 1) Degree of protection IP 20 EN 60 529 2) Protection class II EN 61 140 3) Isolation category Overvoltage category III under EN 60 664-1 4) Pollution degree 2 under EN 60 664-1 )Temperature range Operation - 5 °C…+45 °C ;Storage -25 °C…+55 °C
1
-
-
SITC of Nominal power at 230 V~ mains voltage: 230 V~ incandescent and halogen lamps: 6 x 210 W/VA to 1 x 800 W/VA. Dimmable 230 V~ LEDi: 6 x 210 W/VA to 1 x 800 W/VA in trailing edge control, 6 x 80 W/VA to 1 x 240 W/VA in leading edge control. Inductive L-transformers with LED/low-voltage halogen lamp: 6 x 210 W/VA to 1 x 800 W/VA. Electronic C-transformers with LED/low-voltage halogen lamp: 6 x 210 W/VA to 1 x 800 W/VA. Electronic LC-transformers with LED/low-voltage halogen lamp: 6 x 80 W/VA to 1 x 240 W/VA.
4
-
-
SITC of It is a DALI single-master controller to DALI standard IEC 62 386 Parts 101ed2 and 103ed1. The gateway is suitable for use with DALI and DALI-2 systems. It supports Type 0, 1 and 8 DALI operating devices with DALI interfaces to IEC 62 386 and their integration in a KNX building installation.
4
-
-
SITC of Simple KNX visualization for smartphones, tablets and Windows computers. MDRC devices with associated IOS and Android apps. Application for Windows computers. Easy control using intuitive navigation concept.Ambient Air Temperature: Operation 0...70 °C .
1
-
-
SITC of Freely configurable multifunction control element. Room temperature control/Controller extension with max. 10gang control With labelling field. Transparent labelling sheet with standard symbols included in delivery. Support of KNX functions through innovative colour concept (yellow=lighting, blue=blind, orange=RTC, magenta=scene and white=neutral/no function assigned) or standard illumination red/green. Rocker switch left/right (switching/dimming/blind/value sender/light scenes/fan function).
36
-
-
SITC of KDetection range (for mounting height 2.5 m, 3 m and 4 m): circular. Seated persons Ø: max. 5 m, max. 6.5 m and max. 9 m. Walking persons Ø: max. 6.5 m, max. 8 m and max. 10.5 m. Visible height 16 mm. With 2 channels. Targeted for connection and disconnection of lights bands depending on the room brightness. Regulation in response to the movement possible.
2
-
-
SITC of The switch actuator uses potential free contacts to switch 12 independent electrical loads.The device features a manual operation and displaying of the switching state of the outputs. The 6 A device is especially suited to switch resistive, inductive or capacitive loads. The device is powered by KNX and requires no additional power supply.
1
-
-
SITC of The switch actuator uses potential free contacts to switch 8 independent electrical loads.The 6 A device is especially suited to switch resistive, inductive or capacitive loads. The device is powered by KNX and requires no additional power supply.
1
-
-
SITC of Movement detector with up to 4 channels. For installation in the 1gang, 2gang and 3gang support frame (6346/10-101, 6346/11-101 and 6346/12-101)
18
-
-
SITC of MCB and surge protector
8
-
-
Cool Master For Cool Automation
1
-
-
3D scanning for building immersive model of the Museum space - this will play on the screen at the ticket counter. The 3D virtual interpretation of the museum will also be used on the website & faciltate in outreach
1
-
-
Supplying & Fixing of Floor Standing Rack network Rack - 22U / 600w / 800d, with Heavy Duty Extruded Aluminium Frame for rigidity. Top cover with FHU provision. Top & Bottom cover with cable entry gland plates. Two pairs of 19” mounting angles with ‘U’ marking. Depth support channels - 3 pairs. With a Overall Weight Carrying Capicity of 500Kgs. Side Panels - 22U/800d Front MS Door perforated honeycomb 22U/600w Rear MS Door (Fully Perforated - Mesh) 22U/600w Fan 90CFM 230V AC, 4” dia Castors with Brake (set of 4) Cable manager 1U MS with Loops Shelf, Stationery 475mm N/W PDU 7Sockets 5Amps with MCB Mounting Hardware (Pkt. Of 20) Vertical Cable Channel 50mmW 22U complete in all respect
3
-
-
Supply of following "Capacity (in kVA / KW ) " 80 kVA 3-Phase Input / 3-Phase Output 40 KW 3-Phase Input / 3-Phase Output, Input Voltage Range. "220/380V，230/400V，240/415V (3Φ4W) Range (Full Load) 173~276 / 300~477VAC Range (Derating to 70% Load) 132~173 / 228~300VAC",Input Frequency Range 45 to 65 Hz, Input Power Factor 0.99 (Full Load), Trasient Votage Surge Surppressor External at Input Side, Current Harmonic Distortion(ITHD) 3%,Nominal Output voltage 220/380V,230/400V,240/415V (3Φ4W),Nominal Output Frequency 50/60 Hz Output Voltage Distortion (THDu) 2 % (linear load),Trasient Votage Surge Surppressor External at Output Side ,Crest Factor 3:1,Isolation Transformer Inbuilt on UPS at Output Side ,Isolation Transformer Inbuilt on UPS at Output Side ,Overall Efficiency On Line Mode = Upto 96% , Eco Mode = Upto 99% ,Inverter Overload capacity ≤105 %: continuous,106% ~ ≤125%: 10 minutes; 126% ~ ≤150%: 1 minute; 150%: 1 second,Backup Required Battery VAH 30 Minutes on full load ,Minimum 79000, Battery Bank Voltage Battery Type Battery Make 480 V DC or higher Sealed Maintenance Free (SMF) - 12V Cells .Make : Exide / Quanta ,Noise Level ＜ 60dBA at 1 Meter,Remote Alarm Panel External for UPS Monitioring Purpose ,Manufacturer "QMS: ISO 9001: 2008,EMS:ISO 14001: 2004,OSHAS: ISO 18001: 2007 , NABL Accredited lab in India" Product Safety Certifications (Mandatory) "ESD:IEC61000-4-2: level ,RS : IEC61000-4-3: level3,EFT: IEC61000-4-4:level4 SURGE: IEC61000-4-5:level4,CS: IEC61000-4-6: level3,IEC 61000-2-2,EN 62040-2 EN 61000-3-2"ROHS compliance UPS should be ROHS compliance
1
-
-
Making of Replica based on various size of original seal in Fiberglass with MS Iron framework / Armature. The paintwork should mimic the look & feel of plaster cast of seal depicting a humped bull, script over head
4
-
-
Making of Replica based on various size of Coin in metal coin/ Fiberglass with MS Iron framework / Armature. The paintwork should mimic the look & feel of Coin
5
-
-
Making of Replica based on various size of iron pens made of iron, Fiberglass & any other martial . The paintwork should mimic the look & feel of iron pens
7
-
-
Making of Replica based on various size of Palm Leaf Manuscript made of original Palm Leaf / appropriate material the look & feel
2
-
-
Making of Replica based on various size of paper Manuscript made of original old paper / appropriate material the look & feel of original Palm Leaf Manuscript
17
-
-
Making of Replica based on various size of paper books made of original old paper / appropriate material the look & feel
15
-
-
Making of Replica based on various size of bamboo pens made of bamboo, Fiberglass & any other appropriate material the look & feel
1
-
-
Making of Replica based on Ahandakaram copper Plates cast in copper. The paintwork should mimic the look & feel of copper plates
1
-
-
Making of Replica based on various size of archival high quality print
1
-
-
Making of Replica based on Traditional Puppets use of original material .
4
-
-
Making of Replica based on Traditional Puppets use of original material .
3
-
-
Making of Replica based on Phad Painting use of original material .
24
-
-
Content development and graphic design in three languages: Hindi, English & Bangla for the static display panels from provided data/images and storyline AS PER DPR. According to drawings for Dimensions, Details and Specifications of given by the Architect.
1
-
-
Making of video 60-70 second in three languages : Hindi, English & Bangla & Cost for Software development interactive content including photographs, videos, text matter, animation, audio etc. as per directions of engineer-in-charge
26
-
-
Making of video 70-90 second in three languages : Hindi, English & Bangla & Cost for Software development interactive content including photographs, videos, text matter, animation, audio etc. as per directions of engineer-in-charge
9
-
-
Making of video 90-120 second & Cost for Software development interactive content including photographs, videos, text matter, animation, audio etc. as per directions of engineer-in-charge
18
-
-
Editing of video 180 second Cost for Software development interactive content including photographs, videos, text matter, animation, audio etc. as per directions of engineer-in-charge
110
-
-
Cost for Software development interactive content including photographs, videos, text matter, animation, audio etc. as per directions of engineer-in-charge
10
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements