Metro Railway Tender
View complete overview of Metro Railway Tender
Costs
EMD
₹ 12,30,100Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
Civil-2466-2024-METRO-KOL-HQ-ENGG/METRO RAILWAYTender No
Civil-2466-2024Tender Authority
Metro Railway ViewPurchaser Address
-Website
http://ireps.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Providing and fixing glass mosaic tiles of size 25 x 25 mm/20 x 20 mm of Mridul/Italia or approved equivalent make of approved colours laid over a bed of cement mortar 1:2(1cement : 2 coarse sand) and jointed 5 with white cement slurry with permanent pigment to match the shade of tiles complete .The tiles to be fixed using stone adhesive as cladding to wall, column in round and rectangular shape as per design, pattern ,colour etc. decided by the Engineer-in-charge .Note- The contractor has to deploy a competent architect at his own cost and the finishing scheme submitted by the contractor requires to be approved by Metro Railway before execution.
150
5547
832050
Providing and fixing magnesium compound mural of different shape and size as per the approved 6 drawings and at the locations approved by the Engineer-in-charge including all labours, material, tools and tackles etc. stainless steel screw of adequate size and of grade 304 shall be used for fixing the mural etc. complete in all respect. Note- The contractor has to deploy a competent architect at his own cost and the finishing scheme submitted by the contractor requires to be approved by Metro Railway before execution.
150
10189
1528350
Providing and fixing Canvas painting of different shape and size as per the approved drawings and 7 at the locations approved by the Engineer-in-charge including all labours and materials. Note- The contractor has to deploy a competent architect at his own cost and the finishing scheme submitted by the contractor requires to be approved by Metro Railway before execution.
150
4060
609000
Supplying, fitting, fixing teracota mural at specified locations as per instructions of Engineer-in- 8 charge. The tiles are to be fixed with approved adhesive. Note- The contractor has to deploy a competent architect at his own cost and the finishing scheme submitted by the contractor requires to be approved by Metro Railway before execution.
150
6280
942000
Providing and fixing 6 mm thick clear float toughened glass in aluminium door, window, ventilator 9 shutters, staircase- railing and partitions etc. with PVC / neoprene gasket if required, complete as per the drawings and the directions of Engineer. Rate includes all labour, materials, tools & plants, lead, lift, taxes etc. complete. Note: If thickness of clear float toughened glass changes on technical ground, the rate shall be paid on prorate basis. i.e. for 8mm thick float toughened glass, rate will be = (Accepted rate) x (8/6).
50
1914
95700
Supplying, fitting & fixing in position 100mm wide vertical blinds of approved quality & colour shade 10 including channel and other fixtures for hanging arrangement and also to be provided for the facility open & close to move the blinds at right angles as & when required of approved quality with all contractor's labour, materials, lead, lift, descent, tools & plants, accessories, transportation, taxes, etc. complete.
50
932
46600
Execution of design, manufacturing, supplying, fitting, fixing and installation of Poly fibre Reinforced art work (3D effect) as per drawing and approved by the Engineer. Rate includes all labour, materials, tools & plants, lead, lift, taxes etc. complete.
100
6324
632400
Providing and fixing in position frameless glass partition walls made out of 12 mm thick toughened clear float glass held in position by wall connecting profile with or without openable glass door made out (i) Two 13 Set of 350 mm long pull handles of approved make (ii) Two number corner locks of approved make (iii) Floor spring of approved make. (iv) Lock keeper Plate stainless steel strip at the bottom of doors for doors exceeding 1100 mm (v) with openable door (double leaf). Rate includes all labour, materials, tools & plants, lead, lift, taxes etc. complete.
12
15722
188664
Providing and fixing 25 mm thick flame cut/machine cut for floors/stairs and similar locations of 14 required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing etc. complete at all levels.
-
-
1218678
Providing and fixing in position rebar in concrete with FIS EM390S Fisher chemical make/Lokfix E- series FOSROC chemical /Hilti RE500-V3 or similar supplied by the contractor and fixing them in position at correct locations, lines and levels as per manufactures specifications and as directed and instructed by the 15 engineer. The rate includes drilling holes to the designed depth in concrete with drilling machine, scaffolding, tools/ tackles, injecting specified manufacturer's grout material approved by the engineer etc. complete for all floor/levels/ all heights except the cost of rebar which shall be paid separately under relevant schedule. For increase in depth of the hole due to design requirement, rate will be on pro rata basis of depth i.e for 20 mm dia. 25 mm dia. hole 220 mm deep rate will be 220/200 x accepted rate.
-
-
229450
Galvanisation (minimum 50 micron thick) of MS plate/Flat or any other section in lieu of priming 16 coat of approved steel primer. The Rate includes all material, labour, tools & plants ,lead, lift, transportation, tax etc. complete except cost of MS plate/Flat or any other section which will be paid separately under relevant item. The work will be carried as per instruction of the Engineer-in-charge.
33660
24
807840
Designing, Providing, Fabrication and erection of extruded aluminium fixed louvers / aerofoil sections of approved shade and colour powder coated ( minimum thickness of coating 55 microns) with extruded 17 aluminium sub-frame, extruded built up standard elliptical sections conforming to IS: 733 and IS: 1285 fixed with raw plugs and stainless steel screws or with fixing clips, or with expansion hold fasteners Including necessary filling up of gaps at junctions, at top , bottom and sides with required PVC/neoprene felt complete in all respect. Aluminium sections shall be smooth, rust free, straight, as per architectural drawings and the directions of Engineer-in-charge.etc. All structural steel support frame work shall be paid separately as per item no B 33.
18040
739
13331560
Supplying, pouring and packing non-shrink grout as per manufacturer's specifications under base 18 plates of columns, trusses etc. complete as per drawings and specifications, including cost of packing plates. (per square meter of base plate shall be measured for payment). The Rate includes all material, labour, tools & plants ,lead, lift, transportation, tax etc. complete.
200
9978
1995600
Beautification by weather proof wall painting depicting local folk-art over walls, before painting the wall should be thoroughly cleaned and painted with suitable weather proof agent. The Rate includes all material, labour, tools & plants lead, lift, transportation, tax etc. complete as per direction of Engineer-in-charge.
200
1066
213200
Providing in position storage type Water Cooler of the following capacity, ISI marked, stainless steel 20 front panel, CP brass push cock, inlet float valve, with all plumbing and electrical accessories, inlet, outlet, overflow and drain out connection to floor drain complete as required. The Rate includes all material, labour, tools & plants ,lead, lift, transportation, tax etc. complete Cooling capacity 40 litres/hr, and storage capacity 80 litres.
6
71819
430914
Supplying, installation, testing and commissioning water purifier Aqua guard compact or equivalent 21 of approved make comprising 5 micron filter and UV steriliser on cold water supply in drinking water cooler to work on single phase 230volts 50 HZ AC power supply of required capacity all complete. a) 3 lpm (Aqua guard Hiflow). The Rate includes all material, labour, tools & plants ,lead, lift, transportation, tax etc. complete
6
24272
145632
Supply installation and commissioning of hand drier for drying of hands, so too arms, face, eyes 22 and hair in touch-free mode. The drier goes on automatically when user approaches, and switches off by itself after drying the hands / arms / face, in touch-free mode. With solid-state time-delay feature to avoid chattering. Time required to dry a pair of hands up to wrists: 20 seconds (approx.). Rated for continuous repeat use (CRU rated). Five step seasonal control. Noise level below 70 dB. Stainless steel facia. Indoor fully recess mounted in nine inch brick wall. Language-free guiding logo to indicate the drying position of use. For 240 volts, 1-phase, 50 Hz, 15 amps. AC supply. Sheathed 3 core flexi cable 1-metre length, one 3 pin 15 amps standard plug top. Lock and key for avoiding unauthorized movement of the drier. Music chime while drying with on/off and volume control. Make: Kopal Model "Hygienic 84" or equivalent.
10
52078
520780
Core cutting in members of RCC / Plain CC (of all grades) and at all locations as per directions of Engineer-In charge. The Rate includes all material, labour, tools & plants ,lead, lift, transportation, tax etc. complete. Note : Here Per Unit= mm/m.
1000
85
85000
Supply of Emaco for repairing of RCC surface as per requirement and as per directions of Engineer-In charge. The Rate includes all material, labour, tools & plants ,lead, lift, transportation, tax etc. complete
100
67
6700
Making noses at the resting down position of escalator including cutting and removing of existing granite, Kota stone floor, chipping of RCC surface and repairing of RCC surface using Emaco chemicals. The Rate includes all material, labour, tools & plants, lead, lift, transportation, tax etc. complete
32
4932
157824
Providing & fixing over existing entrance logo structure Aluminium Composite Cladding Providing and fixing Aluminium Composite Panels having total thickness of 4 mm (with 0.5 mm thick aluminium foil skin on both sides) along with minimum 25 micron PVdF coating on top coil and Polymer/Epoxy coating on Back coil (4-7 26 microns) fixed on aluminium substructure of 50 mm x 25 mm x 3 mm or 38 mm x 38 mm x 4 mm (IS Grade aluminium Extrusion) with stainless steel fastening system of Hilti/ Fischer Dash Fasteners on facade, horizontal/ vertical surfaces of columns, suspended ceiling, sills, jambs, canopies etc. and making 25 mm grooves and applying non staining and non-streaking sealant 789 or 991 HP with Baker Rod complete as per approved shop drawings and as per specifications (straight and curved). Only exposed surfaces to be measures and paid. The Rate includes all material, labour, tools & plants ,lead, lift, transportation, tax etc. complete
100
4525
452500
Providing & Fixing of Stainless Steel lettering of size 200 mm to 300 mm with necessary screw, 27 nuts, to be fixed on ACP Panels with all transportation, lead, lift complete. Thickness of steel letter will be 22 SWG and height will be 15 mm above the back surface. The Rate includes all material, labour, tools & plants, lead, lift, transportation, tax etc. complete.
200
895
179000
Providing and applying Nitoflor SL 2000 or similar flow applied 2 mm thick epoxy resin based floor topping high strength self -smooth underlay conforming to BS 6319 for a compressive strength not less than 40 N/mm^2, flexural strength 25 N/mm^2 and tensile strength 12 N/mm^2 7 days. The scope of the work includes:- A) Surface preparation:- surface shall be prepared by mile scarification to get mechanical key effect to the primer and the concrete surface for ensuring maximum bonding strong degrease shall be used to remove the oil deposit 28 on the concrete. Dust and loose particles shall be cleaned using vacuum cleaners. B) Application of primer:- Supply and application of primer NITOPRIME 25 M after mixing the base and hardener mechanically using a slow speed heavy duty drilling machine (400 to 500 rpm) fitted with a suitable paddle to achieve homogeneous mix and applied on the prepared surface. C) Application of NITOFLOR SL. 2000 or similar: Supply and application of Nitoflor SL 2000, over the prepared surface after mixing mechanically the two components using heavy duty drilling machine until achieving a homogeneous mix and spread on the prepared area using serrated trowel for a thickness of 2 mm spike roller shall be rolled over to remove the entrapped air.
600
1921
1152600
Supplying, installation, testing & commissioning of Iron Filtration Plant of 25,000 LPH capacity along 29 with air compressor unit, alum dozing system, soda dosing system, oxidation chamber unit, multigrade filter and chlorine dozing system with contractor's labour, materials, lead, lift descent etc. complete. The rate includes freight pacing and forwarding other Govt. excise charges, training of railway personnel etc. complete. Note: 50% of the rate will be paid against delivery of plant at site and balance will be paid on commissioning.
1
1043422
1043422
Manning, cleaning & providing care taker at lobby of Bimanbandar station. The manning should be 24 hrs. i.e. 1 (one) man @ 8 hrs. in each shift.//(a) Booming, washing & cleaning of celling/Wall/floor Stair case of the office on a regular basis with phenyl, detergent and washing powder etc. The rates also include sanitizing of 30 office (Thrice in a day) by sanitizing machine with suitable chemicals/sanitizers complete in all respect. (b) Dusting/cleaning of furniture and doors and windows on a regular basis and keeping the articles as on where basis and as directed. (c)Cleaning and washing of toilets with acid and phenyl twice in a day. (d) Making provision of freshening of rooms with room freshener of approved quality and make as and when required and as directed.// Note: If on any day or sift the upkeep of Office as per above schedule is missing or even if the person deployed is unsuitable for such manning (which shall be solely directed by Railway's) deduction@ Rs. 873.00 per day shall be made at the sole discretion of Railway.///Note: 1) The safety and security of all items, goods, electrical/electronic appliances, A.C. Computers and all other accessories and office records etc. will be borne by contractor and his men deployed at the places. For any damages/missing of any item, goods or appliances the cost/charge will be recovered from contractor's bill. 2) The contractor will issue I.D. Card to his all men deployed which will be certified by Railway official JE//SSE concern. 3) No Rail/Bus/Taxi/Rickshaw or any type fare or T.A./D.A. will be given to any contractor's staff for travelling while sending them from one place to another place.
12
88118
1057416
Providing temporary barricading of plane MS sheet 16 gauge fixed with steel frame as per drawing, painting with approved colour, quality and brand, writing, lettering and logo including maintenance of the same duly cleaning the same on weekly basis and painting every 12 months, arrangement for red blinker lights on barricades, during night as per requirement and as per instructions of the engineer. Barricading should be rugged. During the construction barricading has to be kept continuously. Barricade board should be periodically maintained with cutting out worn out parts, welding new parts, realigned, repainted and re-lettering as per the direction of Engineer. Barricade board should be cleaned periodically to wash off dust. Nothing extra will be paid for dismantling and erecting the barricades at the same place/stretches. There should not be any opening at the 31 end of barricade except at the locations provided by the engineer. Note:- (i) Once barricade has been provided and work started, removal of barricade is not permitted till completion of entire work and restoration of site. If it is removed by contractor for movement of machinery in course of construction, the same will be restored by contractor at their own cost. (ii) While erecting barricades, the bottom gap between board and road/ground should be plugged with cement concrete from inside. (iii) There should be minimum openings at the end of barricade to allow access of lorries and machine to site work area even this spacing should have proper opening/closing arrangements. (iv) Adequate red blinking light on barricade during night time must be ensured at the location of road diversion/adjacent to traffic movement & other locations with retro reflective tapes as per instruction of the Engineer at site. The cost of this item includes provision for Power back up/Generator-set etc. so as to ensure the blinking light in night time as long as barricades are in position at the work Spot. After completion of the entire work, the barricade shall be the property of the contractor.
690
3125
2156250
Providing and fixing 50 X 100 baffle ceiling (50 mm width & 100 mm Height) or 25 X 200 (25 mm width & 200 mm Height) system comprising of closed box shaped profiles. Metal baffle shall be made out of 0.7- 0.9 mm thick electro galvanized steel material in lengths of up to 2400 mm. The coil should be stove enamelled on a continuous application for pre-treatment. The coils to go through 4 stages of pre-treatment, three times oven baked through conversion coating, priming and finish coat ensuring superior adhesion, high corrosion resistance and good colour stability. The coils to be painted on both sides after degreasing. Inside surface to have a primer 32 of 5 microns and a coat of natural colour of 5 microns, exposed surface to have a primer of 5 microns, binder of 5 microns and topcoat of approved colour of 15 microns. Baffle ceiling panels shall be mounted on slotted galvanized grid profile of minimum 2 mm thickness in a module of 225 mm. Baffle grid shall be suspended and supported by means of 6 mm dia. threaded suspenders at a distance of 150mm from the edge and 1200 mm c/c. Baffle fixing brackets shall be used to keep the ceiling in correct place for the levelling purpose. Metal baffles shall be coil coated in a desired colour. Baffle ceiling system shall be installed in compliances with manufacturer's technical installation brochure and manual. All accessories like end cap, top cap, column rings etc. are included wherever required. Rate includes all labour, materials, tools & plants, lead, lift, taxes etc. complete.
100
11150
1115000
Providing a n d fixing i n position waiting/visitors 3 seater stainless s tee l cha ir w i t h following specification Grade of Steel: 204 Base frame: legs made with 2" x 18 SWG round SS pipe. Horizontal middle 33 support made from 2" x 2" 18 SWG square SS tube with 1" x 1" x 16 SWG square pipe for holding the steel shell. Seat & Back: Seat & back made from SS 304 x 1.2 mm thick round perforated sheet. Chair frame made from 18 mm x 12 mm round pipe. Handle: 2 nos. of handles fitted at both ends from 32 x 16 x 12 mm thick grouted on the existing floor with nuts and bolts a t different locations of platform as directed by the Engineer complete i n all respect with all lead, lift, labour, materials, taxes, tools and plants etc. complete.
10
19551
195510
Providing & fixing of 3 mm thick SS Grade 304 sheet cladding skirting on aluminium base frame 34 25mm thickness complete as per direction of engineer in-charge. (For payment purpose only SS item shall be measured.) Aluminium base frame shall be paid extra as per relevant item of Schedule-B. Rate includes all labour, materials, tools & plants, lead, lift, taxes etc. complete.
27710
611
16930810
Fabrication, supply and erection of Hot dip galvanized MS cover plate fabricated from minimum 6 mm thick MS chequered plate fixed over cleats, stiffeners, runners using 40X40X6 mm Ms angle grouted in position etc. complete as per directions of Engineer-in- charge (only galvanized chequered plate is covered under this item, Other items shall be paid by weight separately).
2250
114
256500
Providing and fixing structural glass assembly of glazed smoke down stand using 2 sheets 6 mm thick toughened glass with nominal gap silicon sealant joint Glass shall be clear toughened and laminated with 1.52 mm thick polyvinyl butyral layer, as per specification and grade 304 stainless steel of hairline finish assembly 36 fixing on bolted patch plate & SS Spider Fitting with counter sunk screw including down hang galvanised bracket support from structural slab using approved anchor as shown in the detailed drawing, including providing and fixing Rock Wool packing with 12 mm thick calcium silicate board as per specification from 1500 to 2000 mm height above false ceiling and bottom edge finished with 3 mm grade 304 SS pressed plate as per relevant architectural drawing for fire separation (for payment purposes area of glass only shall be measured).
150
21468
3220200
Cleaning of each floor including back up areas & entry exit areas, subways of Bimanbandar station (excluding cross over area). The work includes: i) Thorough cleaning of underground Metro station area (each floors, platforms, under croft, ground floor entry exit surrounding area, rooms, false flooring/ceiling area, back up area, toilets, stairs, glass panes of rooms, railings, etc.) with all consumables. chemicals, materials, machineries, labour, etc complete in all respect as per direction of Engineer-in-charge of Metro Railway, Kolkata. ii) After thorough cleaning. Wet cleaning/mechanized cleaning of underground Metro station area (each floors, platforms, 37 under craft, ground floor entry exit surrounding areas including subways, rooms, false floor/ceiling area, back up area, toilets, stairs, glass panes of rooms, railings, etc) with all consumables, chemicals, materials, machineries, labour, etc. complete in all respect as per direction of Engineer-in-charge of Metro Railway, Kolkata. iii) Removal and disposal of all debris rubbish with filling up of accumulated debris in gunny bags and taking them up at the Ground level and keeping the filled up debris gunny bags at ground level as per instruction of Metro Railway, Kolkata and disposal of all debris/rubbish to the suitable location including loading/unloading/leading/lifting/transporting, etc. Complete in all respect as per direction of Engineer-in-charge of Metro Railway, Kolkata.
45000
68
3072600
Development & preparation of architectural drawings for lobby portion of Airport side sub-way for 38 development of lobby as VIP Lounge of Metro Railway with all amenities as per approval of Engineer. Rate includes all manpower, materials, transportation, taxes etc. complete. All draft drawing shall be provided in 4 sets and final drawing shall be provided in 5 sets including one set in polyester sheet along with soft copy drawing in AutoCAD format in model space and paper space, etc. Revision required if any is included in the scope of work.
1
202000
202000
Development & preparation of landscaping drawings for tunnel, Bimanbandar station & Yard from Ch: 5.440 Km (Airport Gate No. 1) to Ch: 7.026 Km (Bimanbandar Yard) including sub-ways connecting to Bimanbandar Station (Jessore Road side & Airport side) showing all existing structure, road, drain etc. with 39 proposed structure, road, drain, footpath etc. as per approval of Engineer. The plan should be in symmetry with the existing landscape of NSCBI Airport. Rate includes all manpower, materials, transportation, taxes etc. complete. All draft drawing shall be provided in 4 sets and final drawing shall be provided in 5 sets including one set in polyester sheet along with soft copy drawing in AutoCAD format in model space and paper space etc. Revision required if any is included in the scope of work.
1
178000
178000
Supplying and installing 1 meter dia. convex mirror of make Saint-Gobain or similar at platform level including the cost of coupler plate, nut-bolt etc. to be fixed on MS post of 2 meter long using anchor fasteners, all complete as per directions of engineer in charge.
14
9304
130256
Providing & fixing of M 12 grade (galvanised steel or stainless steel) anchor fastener of brand HSA 41 M12X100 (Hilti) /FAZII PLUS 12/10 BOLT ANCHOR (Fischer) or equivalent required for fixing bracket, plate, angle etc. to D-wall or any other RCC Structure for walkway or any other structure as instruction of Engineer-in-charge. The Rate includes all material, labour, tools & plants , lead, lift, transportation, tax, scaffolding etc. complete.
1694
202
342188
Providing and fixing flamed finish Sadarahalli grey granite stone (bull-nosed) of size 1200x600x60 mm at platform edge level
-
-
73770
Carrying out digitization/scanning of office documents/files from A4 to A0 size at Metro Rail Bhavan (8th floor) at PCE's office/Bimanbandar Site office premises, engineering department with service provider's own 43 scanners and expert operator & helper etc. All pages to be scanned in grey scale and confirming to 150 to 600 DPI or as specified in the specification and scanning guide line as in specification and made in to PDF file under (less than) 10MB size with saving to be done in PDF OCR format searching mode or as directed in the PC's/ Hard Disc as per the instruction of file /document holding authority. N.B: The rate is inclusive of all taxes including GST:-
-
-
221250
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & 44 cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.0m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer -In-Charge: concealed work including cutting chases and making good the walls etc.
-
-
39930
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & 45 cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in- Charge : External work
-
-
42470
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Large diameter pipes, having thermal 46 stability for hot & cold water supply including all CPVC plain and brass threaded fittings. This includes jointing and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in-Charge: External work(higher dia): 75mm nominal outer dia pipes.
10
2544
25440
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)
-
-
4667
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. 100 mm dia. (the tail pieces, if required will be paid separately): Class II
2
6086
12172
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. 150 mm dia. (the tail pieces, if required will be paid separately): Class II
2
8207
16414
Providing Hydro-geological tests for suitability of site selected for the drilling of Tube well with all tools & plants & necessary including supply of necessary report approved vendor of Govt. authorities as per Engineer-In-Charge.
1
24722
24722
Providing for Geophysical investigation by electro logging system for selection of Portable Water with all tools & plants & necessary including supply of necessary report approved vendor of Govt. authorities as per Engineer-In-Charge.
1
17659
17659
Providing for Bacteriological & Chemical Water Test with all tools, plants & necessary report from approved vendor of Govt. authorities as per Engineer-In-Charge.
1
16246
16246
Providing for Yield Test for selection of discharge of water with all tools, plants & necessary report from approved vendor of Govt., authorities as per Engineer-In-Charge.
1
6851
6851
Construction of Bore well of depth upto 200m (approx) with Hydraulic Bore well Drilling Machine 54 with Truck Carrier & Compressor By 400 mm dia bore in all soils including hard rock, sand stone & boulder formulations all complete as per the tender specification/as approved by Engineer-In-Charge. The rate includes labour cost of lowering and installation of PVC casing pipe, blind pipe and ribbed (slotted) pipe,
200
2232
446400
Extra for Drilling 400 mm dia bore beyond 200mtr as per Engineer-In-Charge.
10
2472
24720
Supply of 300 mm dia PVC Casing Pipe including fittings heavy wall thickness of approved brand as per Engineer-In-Charge. Make-Oriplast, PVC threaded pipe confirming to ASTM- D-1785, Schedule-80, inside dia of pipe= 300 mm ,Thickness of pipe= 18 mm
50
9800
490000
Supply of 200 mm dia. PVC blind pipe including fittings heavy wall thickness of approved brand as 57 per Engineer-In-Charge. Make-Oriplast, PVC threaded pipe confirming to ASTM D-1785 Schedule-80 Inside dia of pipe-200 mm Thickness of pipe= 12.7 mm screen ribbed pipe confirming to IS-12818-1997, Inside da a of pipe= 200 mm, Thickness pipe =10 mm
100
4871
487100
Providing & Installation of pea gravel filter fill of approved quality of size 2 mm to 5 mm between bore & pipe assembly, below well cap as per Engineer-In-Charge.
150
2246
336900
Providing & Installation of 65 mm dia. GI Column pipe including fittings heavy duty for pump delivery with necessary welding and painting outside 2 coats of anti-corrosive paint of approved brand as per Engineer-In- Charge.
50
2755
137750
Providing & Installation 200 mm dia. threaded well cap, housing clamps, guide wires, tail plug etc as per Engineer-In-Charge.
1
63854
63854
Cleaning, developing, testing of tube well for 12-16 hrs its yield & quality of water as per Engineer- In-Charge by all equipment, tools, fuel, vehicle, Air Compressor etc.
1
50716
50716
Vibration free cutting of RCC Roof Slab, Concourse slab Platform Slab, Plenum wall, RCC wall in TVS, Interface wall/Diaphragm wall between Bimanbandar Station and Bimanbandar Yard, Bimanbandar Station 62 and Subway at any level using diamond saw or wire saw cutting as per drawing & specification and as directed by Engineer-In-Charge. Rate includes all contractor's labour, materials, tools &plants, machinery, lead, lift, taxes etc. including disposal of spoils complete. Released material will be contractor's property. Note: For payment purpose, measurement will be considered as perimeter of opening multiplied by thickness of component.
50
33117
1655887.5
Treatment of cut-out surfaces made by diamond cutting with chipping of concrete around exposed 63 reinforcement for a depth of 25mm, then cutting the reinforcement & sealing it with epoxy mortar and painting of whole cut-out area with integral crystalline waterproofing slurry, two coats @ 0.70 kg per sqm, of approved make. The rate includes all labour, materials, tools & plants, loading, unloading, lead, lift, taxes, royalties, cutting, dismantling, cleaning, disposal of rubbish, scaffolding etc. Note:1. Release material will be Contractor's property.
50
11341
567050
Cutting of 30mm deep & 50mm wide chase on face of column/slab/ any RCC structure of any 64 Grade of concrete for fixing of conduit pipes. The rate includes all labour, materials, tools & plants, loading, unloading, lead, lift, taxes, royalties, cutting, dismantling, cleaning, disposal of rubbish, scaffolding etc. Note: In the case of groove having different depth of cutting than as mentioned in the item, it will be paid on Pro-Rata Basis i.e. for 25mm, Rate= (25/30)*Accepted Rate
100
417
41700
Supply of Semi-skilled labours (cook) at lobby of Bimanbandar station as per instruction of Engineer 65 or his representative. Rate includes all contractors labour and materials, tools & plants, taxes etc. complete. Note: (i) The rate also includes the contribution towards EPF & ESI. In case of non-production of document related to EPF & ESI, contribution towards EPF @ 13% and ESI @ 3.25% of accepted rate will be deducted respectively from the bill.
730
1373
1002290
Carrying out different Non-Destructive Tests (NDT) on concrete surface of different component of tunnel & station with service provider's own instruments and expert operator & helper etc. The rate includes all 66 labour, material, equipments, tools & plants, lead, lift, taxes, conveyance charges, loading, unloading, surface preparation for test etc. complete. Note: (1)Idle charge if any due to non-preparation of surface of test or any other issue will be borne by contractor. (2) Scaffolding if required for test at height will be paid separately under relevant item.
-
-
407055
Carrying out friction test on different type of stone at different condition. The rate includes all labour, 67 material, equipments, tools & plants, lead, lift, taxes, conveyance charges, loading, unloading, etc. complete. Note: (i) 2 pieces of size 300mm*300mm per sample is to be submitted to laboratory for testing. (ii) The rate includes transportation of samples to the laboratory, nothing extra will be paid.
-
-
1064952
Manufacturing, supplying, fitting, fixing in position wall panelling as per architects design and as approved quality (IS 303) Topping with 3.5mm to 4.5 mm veneer sheet (Natural) og Green Decowood/ IPE or similar of approved quality and shade fixed with proper adhesive and polished with special liquor materials on wooden frame made of CP Teak or similar of approved quality of section minimum 50mm X 25mm spacing at the 68 rate of approximate 600 X 600 mm both horizontally and vertically c/c or as instructed by Engineer-in-charge. Grooving/ riveting and ensuring proper level/alignment. The wooden frame work should be rigidly fixed with wall and adjacent partition with necessary M.S hold fast, screw, clamps, nails etc. The work also includes dismantling of existing panel if any complete in all respect. For payment no lapping is to be considered and payment should be considered only for finished area. The rate includes all labour, materials, tools & plants, loading, unloading, lead, lift, taxes, royalties, cutting, dismantling, cleaning, disposal of rubbish, scaffolding etc.
25
17956
448900
Supplying, fitting & fixing teak wood moulded bead including polishing of Minimum 25mm x 25mm 69 and as approved by Engineer-in- charge. The rate includes all labour, materials, tools & plants, loading, unloading, lead, lift, taxes, royalties, cutting, dismantling, cleaning, disposal of rubbish, scaffolding etc.
20
292
5840
Supplying, Fitting & Fixing Wooden Flooring in true line and level by 7 to 8.5mm thick Teak wood flooring followed by 12mm Sqm thick Ply in bottom. The rate includes all labour, materials, tools & plants, loading, unloading, lead, lift, taxes, royalties, cutting, cleaning, disposal of rubbish etc.
25
4938
123450
Providing fitting, fixing in position synthetic Roller blind of special quality as approved by architect 71 and as approved by the Engineer-In-charge of any size including all small fittings like nail, screw etc. required as per site condition and to be completed in all respect. The rate includes all labour, materials, tools & plants, loading, unloading, lead, lift, taxes, royalties, cleaning, disposal of rubbish, scaffolding etc.
20
3714
74280
Providing and fixing 0.5mm total coated thick high tensile Zinc Aluminium alloy coated profiled sheeting system having total coating mass of 150gm/m2 (AZ 150). The paint system consists of 15-20 micron polyester coating over primer on outer side and manufacturer backer coat on inner side. The sheet is to be fixed 72 to the purlin with polymer coated hex head self-drilling self-tapping (SDST) screws with integral washers and EPDM seals to generate water-tight system. The sheet shall generally be as per IS:14246. The work shall include all profiles and gutters as per the details shown on the approved drawings and manufacturers as per specialist recommendation, complete in all respects. The work shall be executed in flat, tapered, curved form both in plan and section as required as per instruction of Engineer-in-charge. The rate includes all labour, materials, tools & plants, loading, unloading, lead, lift, taxes, royalties, cleaning, disposal of rubbish, scaffolding etc.
660
1877
1238820
EARTH WORK // Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: // All kinds of soil
100
107
13696
EARTH WORK // Earth work in excavation by mechanical means (Hydraulic excavator)/manual 2 means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. // All kinds of soil
850
205
223529.6
EARTH WORK // Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.
5000
7
47360
Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.
-
-
36296.32
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
-
-
9493976.96
Centering and shuttering including strutting, propping etc. and removal of form for
-
-
1810735.49
Providing and fixing in position Stainless steel Grade 304 plate-1.0 mm thick as per design for expansion joints. 6.1.1 20.00 cum 6882.00 137640.00 28.00 176179.20 12
-
-
230483.2
Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : 6.38 10.00 cum 8890.80 88908.00 28.00 113802.24
-
-
2314071.68
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, 16 machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. 8.15 100.00 Kg 624.95 62495.00 28.00 79993.60
-
-
9954430.4
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :
-
-
14112.38
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :
-
-
5841.34
Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. 9.80 18.00 Each 63.65 1145.70 28.00 1466.50 28
-
-
3317.25
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially 34 designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 10.7 2.00 Each 424.20 848.40 28.00 1085.95 35
-
-
2659916.8
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. 11.37 10.00 Sqm 935.60 9356.00 28.00 11975.68
-
-
20180.16
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the 44 manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
-
-
91941.12
Providing and fixing removable raised/false access flooring with system and its components of approved make for different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and as directed by Engineer-in-charge consisting of: (a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and 25 mm outer diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer diameter with two GI Check nuts screwed on the stud for level adjustment upto 50mm, locking and stabilizing the 45 pedestal head in position at the required level. The pedestals shall be fixed to the subfloor (base) through base plate using epoxy based adhesive of approved make or the machine screw with rawl plug. (b) Stringers system in all steel construction hot dipped galvanized of rectangular size 570x20x30x0.80mm thick having holes at both ends for securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions, the grid formed by the pedestal and stringer assembly shall receive the floor panel, this system shall provide adequate solid, rigid support for access floor panel, the system shall provide a minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits and wiring etc. all complete as per the architectural drawings, as specified and as directed by the Engineer-in-charge. (c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of 800H grade (FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical cones. The top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded together (minimum 64 welds in each dome and 20 welds along each flange). The panel should be Corroresist epoxy coated for lifetime rust protection and cavity formed by the top and bottom plate is filled with Pyrogrip noncombustible Portland cementitious core mixed with lightweight foaming compound. The access floor shall be factory finished with Anti-static High Pressure laminate with Non Warp technology upto 1mm thickness for superior adhesion and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved manufacturers specification and as per the direction of Engineer-in-charge. All specification must be printed on the side of the panel to ensure the quality of the product.
-
-
134416
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as 46 well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 12.1.1 100.00 Sqm 1320.35 132035.00 28.00 169004.80
-
-
18654717.44
FINISHING // Providing and applying two coats of fire retardant paint on cleaned wood / ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant.
500
285
182912
FINISHING // Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : // Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture Please see Item Breakup for details. 3956.00 28.00 5063.68
1000
191
244992
Providing and applying tack coat using hot straight run bitumen of grade VG - 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications : 16.36.1 1000.00 Sqm 414.20 414200.00 28.00 530176.00
-
-
181073.92
Painting road surface marking with adequate nos of coats to give uniform finish with ready mixed road marking paint conforming to IS : 164, on bituminous surface in white/yellow shade, including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete.
-
-
112313.6
Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject 75 matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge. 16.60.1 50.00 Sqm 5609.55 280477.50 28.00 359011.20
-
-
1274259.2
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & 80 cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.-Internal work - Exposed on wall 18.9.7 10.00 Metre 1576.90 15769.00 28.00 20184.32
-
-
20497.28
Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :
-
-
13136.64
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
-
-
29066.24
Providing and fixing brass stop cock of approved quality :
-
-
8087.04
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
17047.94
Providing and laying Double Flanged (Screwed/ Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS : 8329 :
-
-
627941.12
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & 87 cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge, Concealed work, including cutting chases and making good the wall etc. 19.19.4.1 10.00 Each 1882.20 18822.00 28.00 24092.16 88
-
-
29359.36
Making connection of drain or sewer line with existing manhole including breaking into and making 89 good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :
-
-
16667.2
Providing and laying Non Pressure NP-4 class (Heavy duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 21.18 5.00 Sqm 4540.70 22703.50 28.00 29060.48
-
-
3896718.08
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part 93 water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in- charge. The product performance shall carry guarantee for 10 years against any leakage.
-
-
91872
Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1 (4.5 parts crystalline mortar : 1 part water) for the treatment of faulty construction joints, cracks, tie rod holes and spalled & honeycombed surface of RCC underground structures like basement, water tanks, bridge deck etc. to ensure water tightness. The crystallie mortar shall conform to the EN 1504-3 having compressive strength Class R4 greater than or equal to 45 MPa and adhesive bond strength Class R3 greater than or equal to 1.5 MPa. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. 25.8 10.00 Sqm 8230.05 82300.50 28.00 105344.64
-
-
85651.2
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm 96 made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.53 50.00 Sqm 1718.70 85935.00 28.00 109996.80
-
-
213628.8
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 100 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
926931.2
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge . (Cost of aluminium snap beading shall be paid in basic item): 21.14 100.00 Kg 357.90 35790.00 28.00 45811.20
-
-
72235.52
Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ 104 Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600 23.9 50.00 Each 1213.25 60662.50 28.00 77648.00
-
-
40156.8
Demolishing of RCC work (any grade) and Disposal up to 25KM including refund of cost of released reinforcement steel. Released material will be contractor's own property.
100
-
-46800
Dismantling of brick works of station/building/boundary wall/ structures of any thickness, with 2 contractor's labour, tools and disposing the dismantled materials (including bricks) outside Rly land as contractor's own materials, clearing and levelling the area all as per the instruction of Engineer. Release materials will be contractor own property. The rate includes all contractor's labour and materials, tools & plants, lead, lift, taxes etc. complete.
100
-
-34500
Demolishing Plain Cement Concrete in flooring, drain, pavement, wall, skirting etc. of any grade with 20 or 40 mm coarse aggregate including disposal of materials beyond railway land. The rate includes all contractor's labour and materials, tools & plants, lead, lift, taxes etc. complete.
100
1163
116300
Dismantling iron collapsible gate, rolling shutter, M.S Grill, M.S gate, Palisade fencing etc. with post & stays including disposal of release materials. (The released material will be contractor's property and value of material will be recovered from bill as per rate under relevant item of the schedule).
10
84
840
Recovery of cost of released material:
-
-
-17160
Providing and fixing of toughened laminated glass door of 13.52 mm (6 mm + 1.52 mm PVB + 6 1 mm) thickness including stainless steel door handles, deadlock and floor spring complete, necessary cutting in flooring for housing of floor spring as per drawing & direction of Engineer-in-charge. Rate includes all labour, materials, tools & plants, lead, lift, taxes etc. complete
20
16572
331440
Providing and fixing in position Laminated toughened Glass of 13.52 mm (6mm + 1.52 mm PVB + 6mm) thickness at various location in ticket counters, glazed wall, entry barriers etc. including the cost of filling 2 gaps with clear/coloured sealant of approved make and brand etc. complete and as per site requirement. Glass shall be cleared, toughened and laminated with 1.52mm thick polyvinyl butyral layer. Glass held with SS patch fitting with cut out and hole all complete as per relevant drawing and specifications. Rate includes all labour, materials, tools & plants, lead, lift, taxes etc. complete.
20
12127
242540
Providing and fixing toilet mirror in 6 mm thick clear float glass with bevelled and polished at edge, fixed on wall with 6 mm thick hard board backing fixed to wooden cleats with 8 mm dia. & 38 mm long stainless steel stud complete. Rate includes all labour, materials, tools & plants, lead, lift, taxes etc. complete.
5
2626
13130
Providing & fixing 300mm wide SS grating of length as per architectural drawing with 3mm thick 4 304 Grade SS pressed plate with 6mm wide slits @ 15mm c/c with 35mmX35mmX5mm SS grade 304 tube section welded all around edges and at suitable interval for support, flushed with Floor finish including providing & fixing necessary MS angle frame etc. complete as per drawing (for payment purposes only SS item shall be measured). Rate Includes all labour, materials, tools & plants, lead, lift, taxes etc. Complete.
50
731
36550
Digital ultraviolet printing over glass/ SS sandwich panels/ metal sheet/ tiles etc. using original UV 8 color inks with 29 picolitre SPECTRA galaxy print head or equivalent, double deposition of ink o n fixed vacuum 5 table o f size bigger than 2500X1500 f o r precision holding o f glass/metal sheet e tc . including the co st of transportation, loading & unloading etc. complete as per architectural design & drawing and direction of Engineer- in-charge. Printing shall be smooth /textured as directed by Engineer. Rate includes all labour, materials, tools & plants, lead, lift, taxes etc. complete.
100
3289
328900
Providing 10mm thick multiwall IR/UV obstructing Polycarbonate sheet roofing including curved 6 surface, cutting to size and shape wherever required as per detailed drawing and fixing to structure with bolts and nuts 8mm diameter with washers and other accessories complete. Rate includes all labour, materials, tools & plants, lead, lift, taxes etc. complete.
10
3618
36180
Providing and fixing 20 x 20 mm/25 x 25 mm & 4 mm thick glass mosaic tile by adhesive MYKL- 7 252 or similar & grout MYK 644 Series or similar as cladding to finished surface of wall, column etc. as per design & pattern decided by Engineer. Rate includes all design, drawing, labour, materials, tools, & plants, lead, lift, taxes etc. complete.
-
-
367050
Providing and fixing Yellow visibility vitrified tile as per coloured sample of size 200x100x8 mm 8 thick at platform level over 20 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) including pointing the joints with white cement and matching pigments including movement joint as per approved drawing and directions of Engineer-in-charge. Rate includes all labour, materials, tools & plants, lead, lift, taxes etc. complete.
10
1878
18780
Supply and fixing Fibre Reinforced Polymer (FRP) / Glass Reinforced Polymer (GRP)/ composite grating of required thickness without frame, as directed by Engineer i n charge. Material of grating should be 9 resistant to sun light (UV stabilized), water, chemical water and sewerage water. Density of material should not be less than 2 ton/cubic m & should have high impact resistant, flexible and not brittle. FRP shall comprise of 55% resin and 45% fibre glass with no filler content. Material of product should conform to IS 1726 and BS EN 124 for load bearing test and permanent set test. Average wall thickness should not be less than 5 mm. Rate includes all labour, materials, tools & plants, lead, lift, taxes etc. complete.//38mm thick Grating
10
3511
35110
Provid ing a n d f i x i n g F RP/GRP/ composite r e s i n a n g l e f r a m e o f appropr iate size 10 and38x38x6.35mm thick or 50x50x6mm thick. FRP shall comprise of 55% resin and 45% fibre glass with no filler content. Density of material should not b e less than 2 ton/cubic m. Rate includes all labour, materials, tools & plants, lead, lift, taxes etc. complete.//50x50x6mm
50
462
23100
Providing & fixing 12 mm thick vanity counters/ledges for W.C. and urinals of solid acrylic material over 12 mm external grade ply with necessary framework, fasteners etc. complete as per direction of Engineer. Rate includes all labour, materials, tools & plants, lead, lift, taxes etc. complete.
2
11006
22012
Providing & fixing 12mm thick counter top for EFO/Station control room/ Wash rooms with wash basins troughs of solid acrylic material over 12mm external grade
1
11006
11006
Providing and fixing in position frameless glass partition walls made out of 12mm thick toughened clear float glass held in position by wall connecting profile with or without openable glass door made out (i) Two Set of 350mm long
1
15722
15722
Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe confirming to IS 1 3589/IS1239 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/ support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. Rate includes all labour, materials, tools & plants, lead, lift, taxes etc. complete
-
-
10695300
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless 2 Steel coupling of 63 mm dia. with cast iron wheel ISI marked conforming to IS 5290 (Type-A) with blank Gunmetal/Stainless Steel Cap and chain as required. Rate includes all labour, materials, tools & plants, lead, lift, taxes etc. complete. Single headed Stainless steel
6
8335
50010
Supplying a n d f ixing Single headed external y a r d hydrant va lve w i t h 1 N o . 6 3 mm dia. 3 Instantaneous FM Gun metal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming t o IS5290 (type A) blank Gunmetal Steel cap and chain as required. Rate includes all labour, materials, tools & plants, lead, lift, taxes etc. complete. Single headed Stainless steel
31
8380
259780
Supplying, fixing, testing a n d commissioning o f butterfly v a lv e o f P N 1 . 6 r a t in g with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required. Rate includes all labour, materials, tools & plants, lead, lift, taxes etc. complete.
-
-
68614
Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non- 5 raising spindle, bronze/gunmetal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 o f following sizes as required. Rate includes all labour, materials, tools & plants, lead, lift, taxes etc. complete
-
-
93062
Providing, fixing, testing & commissioning of 15 mm dia. quartzoid bulb type sprinkler of rating 68 degrees centigrade with required accessories. Rate includes all labour, materials, tools & plants, lead, lift, taxes etc. complete. Pendent Sprinkler
50
678
33900
Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. Rate includes all labour, materials, tools & plants, lead, lift, taxes etc. complete.
1
2110
2110
Supplying and fixing 63 mm dia. 15 m long RRL hose pipe with 63 m m dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required. Rate includes all labour, materials, tools & plants, lead, lift, taxes etc. complete. Stainless Steel (Grade 304)
12
5857
70284
Supplying and fixing first-aid Hose Reel with MS construction spray painted i n post office red, conforming t o I S 8 8 4 complete w ith t h e following a s required. 2 0 m m nominal internal d ia . water hose 10 thermoplastic (Textile reinforced) type -2 as per IS: 12585, 20 mm nominal internal dia. gun metal globe valve & nozzle. Drum and brackets for fixing the equipments on wall. Connections from riser with 25 mm dia. stop gun metal valve & M.S. Pipe and socket. Rate includes all labour, materials, tools & plants, lead, lif t, taxes etc. complete. 30 m.
6
11777
70662
Supplying & fixing 63 mm dia. gun metal short branch pipe with 20 mm nominal internal diameter 11 size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required. Rate includes all labour, materials, tools & plants, lead, lift, taxes etc. complete. Stainless steel (grade 304)
6
5294
31764
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous 12 inlet couplings complete with cap and chain as reqd. for suitable dia. MS pipe connection conforming to IS 904 as required. Rate includes all labour, materials, tools & plants, lead, lift, taxes etc. complete. 3 way-150 mm dia. MS pipe.
1
13021
13021
Supplying & Providing ABC type fire extinguisher 4 K g Capacity with a l l contractors' material, labour, lead, lift, taxes etc. complete.
2
2931
5862
Supplying & providing mechanical foam f ire extinguisher 9 litre capacity with a l l contractors' material, labour, lead, lift, taxes etc. complete.
1
3885
3885
Supplying & providing CO2 type fire extinguisher 4 .5 Kg capacity with a ll contractors' material, labour, lead, lift, taxes etc. complete.
1
7633
7633
Supplying & providing trolley mounted C O 2 type f i r e extinguisher 2 2 .5 K g capacity w ith all contractors' material, labour, lead, lift, taxes etc. complete.
1
15676
15676
Supplying & providing Modular Fire extinguisher ABC 5KG capacity with all contractors' material, labour, lead, lift, taxes etc. complete.
6
4157
24942
Providing of FHC Door made of 16 gauge M.S. Sheet with M.S frame of size 105 x 70 mm 18 complete door and frame assembly including all hardware's (Concealed Flush handle, Allen Key Lock, MS Hinges, 4 mm Thick Float glass) & accessories. The door to be painted with fire resistance paint. The scope shall also include the painting of the frame with the same paint as the shutter or complete as per direction of Engineer- in-charge. Rate includes all labour, materials, tools & plants, lead, lift, taxes etc. complete.
6
4088
24528
Providing and fixing lever operated Gun metal ball valve with SS ball
-
-
6589
Supply of Magnetic Flow Meter//80 mm dia for borewell
3
18494
55482
Supply of Magnetic Flow Meter - 100mm for Air Cooled Chiller makeup
1
23117
23117
Supply of Manual Flow Meter with strainer - 150mm for Seepage Pump
11
10017
110187
Supply of Manual Flow Meter with strainer - 80mm for Ancilary building
1
7706
7706
Providing and fixing G.I. suction & delivery headers / pipes for water supply pumps (IS:1239 heavy class) with G.I. Fittings (bends, tees, reducers, plugs, union, flange & blank flanges etc) and clamps and jointing with teflon tape or hold tite including chase cutting and making good the walls, floors etc. wherever required.
-
-
141060
Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 26 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required:
-
-
1343355
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.
-
-
124492
Providing and fixing K18/22 Open Spray Medium Velocity Nozzle (UL listed) having natural finish or Nickel Chrome plated, as required, suitable for pressure rating of 12 bars.
360
493
177480
Providing and fixing electrically operated Flow Indicating switches including 1.5 mm thick gasket, nuts and bolts complete as per M & W Specification.
-
-
572240
Providing & Fixing 120 minutes steel Fire rated doors as per detailed specification along with accessories as per NFPA 80 and tested as per NFPA 252, temperature increase on the un-exposed surface not exceeding an average of 361°C (650°F) during first 30 mins of test. Note: Cost of following minimum 30 Accessories, as per NFPA 80, has been included in the price of respective doors along with the cost of any other accessories provided to meet the fire rated performance requirement of the specifications. 4" ball bearing hinges (for single leaf door) 04 nos. 4" ball bearing hinges (for double leaf door), 01 nos. Door closer (Fire rated - Heavy Duty) 01nos Tower Bolts (for doubles leaf doors except in Double leaf Doors with Door Coordinators. 01 nos 3- point latch system from Corbin Russwin model no. ML 2022 X 630 X LWA (for all doors except doors with panic bar as in item above) 01 nos
-
-
12975858
Providing & Fixing non-fire rated doors sliding doors of size 2100mm x 2100 mm and minimum door thickness of 47mm as per detailed specification along with all necessary accessories required for installation as per instruction of Engineer- In-charge. The skin material of the door should be Galvanized steel as per IS 31 277/Stainless Steel 304 Grade, No. 4 finish with door skin thickness 1.2-1.6mm and infill materials of mineral wool/ honeycomb/ polyurethane foam/steel stiffened. Frame sheet thickness should be 1.6mm-2.0mm. Finish of the door should be Pure Polyester Powder Coated to any RAL shade/wood stained to withstand 300 hours of salt spray as per instruction of Engineer-In-Charge. The rate includes all labour, material, lead, lift, taxes, transportation etc. complete.
9
7807
70263
Providing & Fixing non-fire rated doors of minimum door thickness of 47mm as per detailed specification along with all necessary accessories required for installation as per instruction of Engineer- In- charge. The skin material of the door should be Galvanized steel as per IS 277/Stainless Steel 304 Grade, No. 4 32 finish with door skin thickness 1.2-1.6mm and infill materials of mineral wool/ honeycomb/ polyurethane foam/steel stiffened. Frame sheet thickness should be 1.6mm-2.0mm. Finish of the door should be Pure Polyester Powder Coated to any RAL shade/wood stained to withstand 300 hours of salt spray as per instruction of Engineer-In-Charge. The rate includes all labour, material, lead, lift, taxes, transportation etc. complete.//1000x2100 mm (Single Leaf) Non-Fire rated metal shutter. Push plate in front pull plate in back. With 650x450 mm Air transfer grill.
13
8008
104104
Supply and fixing of 46 mm thick steel door shutter with fittings accessories, glass vision panel, ironmongeries etc. & frame of 120 minutes fire rated with 20 Minutes insulation confirming to BS-476, Part 20-22 and IS:3614 part-II, Prototype certified from Govt. approved Lab. /CBRI, fabricated with 2 nos. of 0.9 mm thick 34 galvanized steel sandwiching fire insulation materials in between suitable for 120 minutes. Door frame are manufactured with 1.2mm thick galvanized steel sheet pressed to form Single rebate profile of size 100X57 mm and fixing with dash fastener of approved size. Vision panel of 4mm thick float glass also to be provided as per relevant specification, if required. The frame and shutter shall be finished with powder coated approved shade. Rate includes all labour, materials, tools & plants, lead, lift, taxes etc. complete.
10
6250
62500
Adjustment Rate for provision of Door Coordinator in place of Tower bolts.
113
10856
1226728
Supply and installation of Acrylic Based Fire Barrier Joint Sealant system Fischer FiAM 310 or equivalent at an application thickness of 05 mm with minimum 2 hours fire & smoke rating when tested in accordance with UL EU, BS 476-20, EN 1366, IS 12458, NBC 2016 standards for fire condition with 2 hours of fire & smoke rating in top of wall joints between slab and internal masonary wall/ Plenum wall/ RCC Wall. The Joint 36 sealant shall be a flexible material to accommodate the movement minimum upto 25%. The backing material like mineral wool of 64 Kg/cum density shall be compressed for 30% and fit into the joint in compression zone as per the recommendation of manufacturer. The cost shall include cost of material, labour, scaffolding, tools tackles, plant & machinery etc all complete. Rate: Considering minimum joint width 20 mm to Maximum 30mm at 5mm thickness for single side application on Material & Installation. Double side application will attract double measurement on material & installation.
781
605
472505
Supply and using cement at work site:
-
-
495330
Supplying & Providing of TMT Reinforcing Steel Fe500/Fe500D grade as per technical specifications, from approved list of suppliers, handling, straightening, cutting, cleaning, bending, tying, lap/welding, placing, including binding with G.I winding wire in diamond form at each reinforcement junction of 18 SWG in all structural concrete at all height and depth with leads complete as per drawing, specifications and 1 direction of Engineer including welding toward stray current protection effect as per the system approved by the engineer . Note: (a) The payment of reinforcement steel will be made as per actual consumption as per bar bending schedule. (b) The mechanical coupler used in place of lap joint will not be paid separately except at junction of diaphragm wall & horizontal slabs. (c) No payment will be made for lap joint, welding, splicing, wastage, chairs, spacers and reinforcement bars used for lifting hooks & handling. (d) The rates also include charges for loading, unloading, transportation, handling, testing, taxes etc. complete.
34
93656
3184304
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements