Get tender documents at just ₹200 per tenderKnow More
Search made simple for latest tendersNo hidden charges. No keyword restrictionsExplore Our Plansor Pay Per Tender

DATE: 09-04-2019 Item no. QTY. DESCRIPTION OF ITEM UNIT RATE RATE IN WORDS AMOUNT (in `) A-01 140.00 Charges for removing the existing false flooring systems including panel boards of size 600mm x600mm and pedestals fixed along with access floor systems etc. including the charges for removing transportation charges for the serviceable items upto CMG store (Approx. 3.00 Km ) and stacking and disposal of unserviceable items etc. Complete all as directed by the EIC. SQM 0.00 A-02 140.00 Providing and fixing Steel Infill Access floor with Vitrified Tile Finish (false floor) of M/s. DG False flooring & Technologies Pvt. Ltd. Or M/s.United Access floor Pvt., Ltd., or equivalent all as per following specifications: SQM 0.00 S Y S T E M : The access floor system to be installed shall provide a minimum finished floor height of 300mm to 1000mm from the existing floor level. The system shall provide suitable pedestal and under-structure designed to withstand various static loads and rolling loads subjected to it in an office/ server/ DCS/ panel/ rack area/clean rooms/ control rooms, etc,. The entire access floor system shall provide for adequate fire resistance, acoustic barrier and air leakage. Vitrified Top Finish: The panel is to be fixed with vitrified tiles of Approved make (RAK/KAJARIA/SOMANY or Equivalent) in the top of the panel. The edge trim is mechanically locked and sealed in place to avoid detachment. P A N E L L O A D I N G: Concentrated Point Load - 560 kgs on a 25 x 25 mm square indenter on the centre of the panel with a maximum permissible deflecting of not more than 2.5mm. Uniformly Distributed Load (UDL) - 1680 kg/ M2 with a maximum permissible deflecting of not more than 2.0 mm. INDIAN SPACE RESEARCH ORGANISATION - DEPARTMENT OF SPACE NIT No. :IPRC/CMG/TS/e-08/MI/CPH-03/2019-20 Name of the Tenderer Name of work: Replacement of false flooring in SPTF, HAT control centre and Measurement room of USETI at HAT-4 facility /IPRC, Mahendragiri. SCHEDULE OF QUANTITIES 1/3 DATE: 09-04-2019 Item no. QTY. DESCRIPTION OF ITEM UNIT RATE RATE IN WORDS AMOUNT (in `) INDIAN SPACE RESEARCH ORGANISATION - DEPARTMENT OF SPACE NIT No. :IPRC/CMG/TS/e-08/MI/CPH-03/2019-20 Name of the Tenderer Name of work: Replacement of false flooring in SPTF, HAT control centre and Measurement room of USETI at HAT-4 facility /IPRC, Mahendragiri. SCHEDULE OF QUANTITIES F I R E R A T I N G: The Panels shall confirm to Class O & Class 1 Fire Ratings tested as per BS 476 Part 6 & 7 SUB STRUCTURE - PEDESTAL ASSEMBLY: Sub structure installed to support the panel shall be suitable to achieve a minimum finished floor height of 65mm to a maximum of 600 mm from the existing floor level. Pedestal design shall confirm speedy assembly and removal for relocation and maintenance. The assembly shall provide easy adjustment of leveling and accurately align panels for a maximum 30 mm up and down in the vertical direction. Pedestals shall support an axial load of 2200kgs. without permanent deflection and an ultimate load of 3500 kgs. The Pedestal head assembly shall consist of an 80X80 mm aluminum die cast proprietary designed head which shall have an inbuilt stringer The sub structure assembly shall be suitably anchored to the floor with suitable adhesive or fastener as recommended by the manufacturer All steel components shall be electro galvanized. S T R I N G E R S: The stringer is electro galvanized steel cold rolled construction specially designed for lateral stability, rolling loads and to support the panels on all four sides for alignment. The stringer to have a counter sunk holes at both ends to accommodate bolting of the same to the pedestal head assembly. The stringers shall be 20 x 25 x 1 x 575 mm N O T E: 1. One no. of panel lifting device has to be supplied freely to Department for day to day maintenance. The quoted rate shall be inclusive of lif

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.