Eastern Railway Tender

Supply ,foundation, installation, fixing, testing , connection and commissioning of dust &vemin proof LT MS panel board consisting of the following- 2 Nos. 400 Amp 415V, minimum 50KA, 4 pole microprocessor control MCCB as incomer with inbuilt overload, shortcircuit and ground fault protection, 2 Nos. 200 Amp 415V, 2 Nos. 100 Amp 415V,2 Nos. 63 Amp 415V,and 2 Nos. 32 Amp 415V MCCBs all are minimum 16 50KA, 4 pole microprocessor control MCCB with inbuilt overload, shortcircuit and ground fault protection, as outgoing 4 pole copper busbar 800 Amp capacity- 1set, T he MCCBs should be provided with CT operated multifunction digital meter( with serial port rs485), LED indication lamps and all accessories with cable entry box ,cable alley with gland and thimble for connection of cables .The panel to be installed as per site condition with proper foundation. MCCBs should confirm to IEC:60947-II /IS:13947-II) ( MCCBs make :Siemens , GE ,Hager, L&T,ABB, schneider or equivalent). (S=583536.00, L=9000.00)

Laying, jointing, connection , testing of 3 nos. single core cable 1100 volt grade through girder with support on suitable size LT pin / shackle insulators fitted on MS bracket & clamps at suitable intervals including socketing and jointing at termination box for 110 V ac line along with commissioning of line.(S=192.00, L= 60.00)

Supply fixing and connection of 30/32 Amp 3 Ph 3 pole and earth metal plug socket in TPN enclosure with TP MCB (6-32Amp) (as required at site) (make : Havells, L&T, Siemens, Hanger, C&S, schneider, ABB or equivalent). (S=4314.00, L=224.00)

Supply fixing ,connection, testing and commissioning of 200Amp 415Volt, 50Hz, minimum 50KA 4pole microprocessor control LT MCCB with inbuilt overload, shortcircuit and ground fault protection,under 10 voltage release with all accessories including multifunction digital meter, LED indicationlamps, Cable entry box with gland and thimble for connection of cablesl with SS enclosure and proper fixing arrangement with clamp, MCCBs should confirm to IEC:60947-2/IS:13947-2 latest year )(make : L&T, Siemens, Hanger, GE, schneider or equivalent). (S=62131.00, L=1683.00)

Supply, laying and wiring of 110 V dropping point (from junction box to terminal board) with 6 sq mm PVC insulated single core multistrand FRLS Cu cable 1100 V grade conforming to IS - 694/ 2010 or latest 19 year in heavy gauge ISI marked ( make Presto / Plaza/ AKG ) PVC conduit with uniform wiring clamping at regular interval ( Each pillerdropper should consist of 2 nos. 6 sq.mm PVC insulated cu cable )and to be terminated at suitable 20 Amp SPN Plug socket with 6-32 Amp MCB ( Capacity as required) in sheet steel enclosure ( Each piller dropper should consist of 2 no. 6 mm2 PVC insulated cu wire of approx. 7 m length). (Wire make Finolex, Polycab, KDK, Havells)( MCB make L&T, ABB, Siemens, C&S, Schnider or equivalent)(MCB should conforms to IS/IEC 60898 and IEC 60947-2). (S=2605.00, L=224.00)

Supply, fixing, testing and commissioning of 45 Watt LED street light fitting complete with 27 necessary clamping arrangement with heat resistance toughened glass, minimum IP 65 protection with individual LEDs, better optics for uniform distribution. High efficacy Operating input voltage range (in Volts) 140-270 ( make, Crompton , Bajaj, Philips, Havells, century LED{magik}or equivalent). (S=3250.00, L=100.00)

Supplying, testing , commissioning and laying of earth strips G.I. Size 37.5 mm x 8 mm thickness laying and fixing at different sheds on girder truss with proper welding and then connection with earth pit and distribution panels and machineries by 4 SWG GI wire. (S=230.00, L=96.00)

Supply, installation, fixing , commissioning and connection of 4-Pole copper busbar 200Amp 2 capacity of suitable length, with 6 way copper busbar chamber in a suitable MS box with MS sheet enclosure with proper fixing arrangement, cable entry box with gland socket and thimble for connection of cables both incoming and outgoing.(Havells Cat. No, IHBC020006. or equivalent). (S=11180.00, L=838.00)

Wiring of 6A/5pin plug point with single core PVC insulated FRLS multistrand copper conductor cable of size 1.5 sq. mm., 1100 V grade conforming to IS 694-2010 through suitable size heavy gauge rigid PVC 33 casing/ caping or conduit ( ISI marked) along with PVC insulated copper conductor cable of size 1.5 sq. mm for ECC along with suitable size heavy gauge PVC board with modular type switch, plug socket ( (Wire make : Polycab, Havells, Finolex, KDK, KEI, RR Cable, mescab, gloster or equivalent)(PVC casing/ caping make Precesion, Presto) (Switch , Plug socket make: Anchor, Crabtree , Legrand , HPL, standard , C&S ,panasonic or equivalent). (S=295.00, L=55.00)

Wiring of submain with 2 nos. of single core PVC insulated FRLS multi strand Copper conductor 34 cable of size 6 sq. mm.,1100 V grade confirming to IS 694/2010 or latest in heavy gauge MS conduit with MS clamp/MS nut bolts including all other accessories. (make AKG, BEC or any ISI marked) along with PVC insulated stranded copper conductor cable of size 2.5 sq. mm for ECC. (Wire make : Polycab, Havells , Finolex, KDK, KEI, RR Cable, mescab, gloster or equivalent). (S=252.00, L=36.00)

Supply fixing and connection of 20 Amp Single Ph 2 pole and earth metal plug socket in SPN enclosure with SPN MCB (6-32Amp) (as required at site) (make : Havells, L&T, Siemens, Hanger, C&S,standard or equivalent). (S=1172.00, L=224.00)

Supply ,fixing , testing and commissioning of 150 Watt LED Highbay light fitting complete with 26 necessary hanging arrangement with PDC housing, minimum IP 65 protection with individual LEDs, better optics for uniform distribution and all other accessories , Operating input voltage range (in Volts) 140-270 ( make, Crompton , Bajaj, Philips, Havells, century LED {magik} or equivalent). (S=9989.00, L=210.00)

Supply, installation, fixing ,commissioning and connection of 4-Pole copper busbar 400Amp 1 capacity of suitable length, with 6 way copper busbar chamber in a suitable MS box with MS sheet enclosure with proper fixing arrangement, cable entry box with gland socket and thimble for connection of cables both incoming and outgoing.(Havells Cat. No, IHBC040006. or equivalent). (S=24343.00, L=1823.00)

Cutting of concrete and trenching drawing laying and jointing of the 1100V grade cable through 23 underground as per CEE's drawing no. E4/GPST/033/87 and refilling the trench after laying the cable including making good the damages and then smooth flooring and re-concreting (18" wide x min 3' deep) with cement , sand,& stone chips in ratio 1:2:4 and connection with switcher gear along with supply of suitable size gland, socket etc. as required. (S=321.00, L=275.00)

Supply and installation of 4 way MS terminal box with 4 nos. copper busbar , hinged door with locking arrangement and connection, size as per requirement. (S=580.00, L=100.00)

Supply of ISI marked XLPE insulated, PVC outer sheathed 4 core 300 mm2 armoured cable with Al conductor 1100 V grade &conformingto IS: 7098 (Pt-I) /1988 with latest amendment( Make: Gloster, Havells, Polycab, KEI,Nicco,Finolex or equivalent). (S=1999.00, L=0.00)

Supply of ISImarked single core HRFR PVC insulted industrialcable 16 sq.mm. Copper conductor cable 1100 V grade as Conforming to IS 694/2010. (S=253.33, L=0.00)

Supply , installation , connection ,testing of combined of 63 Amp 415v 50Hz 3 Ph 5 pin metal plug & socket in TPN enclosure with TP MCB ( 40 - 63 amp as required) (MCB C curv Conforms to IEC 60947 - 2) ) (Make - L&T, Havells, Legrand, C&S, Siemens,Schneider, Hager, abb or equivalent). (S=16035.00, L=224.00)

Supply of ISI marked XLPE insulated, PVC outer sheathed 4 core 70 mm2 armoured cable with Al conductor 1100 V grade &conformingto IS: 7098 (Pt-I) /1988 with latest amendment( Make: Gloster, Havells, Polycab, KEI,Nicco,Finolex or equivalent). (S=510.00, L=0.00)

Laying, jointing, connection, testing& commissioning of LT cable 1100V grade of higher size (up to 22 95 sq.mm.) along the wall/catenary or garder truss by necessary clamping arrangement including socketing and termination with epoxy end jointing where necessary (clamp should be made of 50mm x 6mm M.S. Flat). (S=55.00, L=31.00)

Supply of ISI marked XLPE insulated, PVC outer sheathed 4 core 50 mm2 armoured cable with Al conductor 1100 V grade &conformingto IS: 7098 (Pt-I) /1988 with latest amendment( Make: Nicco, Gloster, Havells, Polycab, KEI or equivalent). (S=358.00, L=0.00)

Supply of ISI marked XLPE insulated, PVC outer sheathed 4 core 400 mm2 armoured cable with Al conductor 1100 V grade &conformingto IS: 7098 (Pt-I) /1988 with latest amendment( Make: Gloster, Havells, Polycab, KEI,Nicco,Finolex or equivalent). (S=2699.00, L=0.00)

Supply of ISI marked XLPE insulated, PVC outer sheathed 4 core 185 mm2 armoured cable with Al conductor 1100 V grade &conformingto IS: 7098 (Pt-I) /1988 with latest amendment( Make: Gloster, Havells, Polycab, KEI,Nicco,Finolex or equivalent). (S=1350.00, L=0.00)

Supply, fixing, testing and commissioning of Heat Shrinkable type straight through LT cable joints (200sq mm to 400 sq mm) ( make -3M, mseal). (S=3275.00, L=0.00)

Laying, jointing, connection, testing& commissioning of LT cable 1100V grade of higher size 20 (above 95 sq.mm.) along the wall/catenary or garder truss by necessary clamping arrangement including socketing and termination with epoxy end jointing where necessary (clamp should be made of 50mm x 6mm M.S. Flat). (S=99.00, L=71.00)

Supply installation , testing and commissioning of 30 KVA 415V /110 V 3 Ph copper wounde oil cooled transformer complete as per IS:2026 : 2011 latest with all accessories. ( Make: Automatic Electro Gear, Eastern Transformers EqupmentsPvtLtd.or similar anyISI marked. (S=124171.00, L=11363.00)

Supply fixing ,connection, testing and commissioning of 400Amp 415Volt, 50Hz, minimum 50KA 11 4pole microprocessor control LT MCCB with inbuilt overload, shortcircuit and ground fault protection,under voltage release with all accessories Cable entry box with gland and thimble for connection of cablesl with SS enclosure and proper fixing arrangement with clamp, (MCCBs should confirm to IEC:60947-2/IS:13947-2 latest year )(make : Siemens , GE , Hager, L&T, ABB, schneider, legrand or equivalent). (S=68689.00, L=1683.00)

Supply, digging, insertion testing & commissioning of Earth pipe made of 2 numbers heavy gauge 28 G.I. pipe of size 50 mm dia. 3 mtr long make TATA/JINDAL including cutting and boring of concrete floor at workshop, construction of earth pit duly sorted by suitable length of G.I. Flat 37.5 mm x 8 mm including making good the damages with masonite flooring, heavy duty hinge C.I. pit cover along with charcoal and salt inside the earth pit.(S=4883.00, L=4938.00)

Laying of cable through HDPE Pipe by Micro tunnelling Process including termination of both end with necessary Nut & bolt, suitable rating socket, gland, PVC tape , cable jointing kits etc. (S=448.00, L=995.00)

Supply fixing, installation, testing and commissioning of 6 Way, MCB DB 240 V, 50 HZ complete with enclosure with metal door 1 NO 40 Amp DP MCB and 4 NOS. SP MCB 6-32 Amp (C curve and rating as required) including connection with necessary arrangement(MCB make: L&T, Siemens, ABB, Havells, Legrand, abb, hager, c&s or equivalent). ( MCBs should confirm to latest & 60947-2) (DB should confirm to IEC 61439-1&3 30 & IS 8623 -1&3 or latest with CRCE sheet steel.(S=4636.00, L=300.00)

Supply fixing ,connection, testing and commissioning of 63 Amp 415Volt, 50Hz, minimum 50 KA 14 4pole microprocessor control MCCB with inbuilt overload, shortcircuit and ground fault protection with SS enclosure and proper fixing arrangement with MS clamps and with cable entry box with gland and thimble for connection of cables, (MCCBs should confirm to IEC:60947-2)(make : Siemens , Hager, L&T, ABB, hager, C&S, schneider,Legrand or equivalent). (S=45765.00, L=571.00)