Defence Research And Development Organisation Tender
... More
BidAssist is a very user-friendly website that helps us to explore all the new opportunities so as to achieve growth in our business. It helps us to attain all the information with respect to any e-tender the Arunachal Pradesh government has posted on its website in a very hassle-free manner.
Defence Research And Development Organisation - DRDO Tender
Civil And Construction
Transportation and Logistics
Eprocure
Opening Date13 Dec 2018
Closing Date21 Jan 2019
Tender Amount₹ 10,49,26,782
Costs
EMD
₹ 20,85,820Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2018_DRDO_417933_1Bid Award Id
ViewTender No
CCE(R AND D)E/ENQ-64/CIV/TAW/2018-19Tender Authority
Defence Research And Development Organisation ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
40mm butterfly valve
2
-
-
... More
Providing & fixing thermal insulation in hot water pipes a polyolefin foam of closed cells structure having thermal conductivity of 0.036 W/M.K at an average temperature of 30oC. All joints shall be sealed with adhesive & aluminim tape.
19 mm [6 mm thick insulation]
10
-
-
... More
40 mm dia nominal bore
170
-
-
... More
Bed Side Table of size 450 X 400 X 400 mm made out of 19 mm thick commercial block board, with 1mm thick laminate of approved shade & quality & 6 mm thick ply on the back. Having one drawer and open shelf all exposed edges to have teak wood lipping including hardware and finished with two or more coat spirit polish including wood filler
33
-
-
... More
Supply of Standard Steel Almirah Double Portion of size 2000mm x 1200mm x 480mm depth in two individual compartment each 1000mm x 1200mm x 480mm depth conform to IS:3312-1984 having following specifications:-
a) Bottom Pedstal.
b) 18 guage body and shelve.
c) Electroplated handle latch 2nos.
d) Brass Lock 2nos.
e) Adjusting strip for shelves (Both Compartment)
f) Wardrobe with aluminium rod of 16 swg for top quoter portion (both compartment) g) Powder coated as specify powder coating should be treated by seven tanks process respectively with one lectrolytic deep process to produce protective oxide coating for smooth surface with mat finish anticorrisive automated powder coating paint of thicness 60 micron. (colour shall be got approved by Engineer-in-Charge).
10
-
-
... More
Edges of slabs and breaks in floors and walls
Under 20 cm wide
190
-
-
... More
10500 kcal/Hr./3.0 TR (1200 CFM WITH 25mmSP)
4
-
-
... More
25x6mm earth strip
50
-
-
... More
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
184215
-
-
... More
PANEL BODY EARTHING Supply of Earthing termination made of copper-bonded rod of 10 feet length,14.2 mm dia. (Minimum copper bonding shall be 0.25mm) along with Rod-to-Conductor connectors, Earth enhancement material, Pit Cover and other accessories as required and as per specification and other applicable codes. Make: JMV
2
-
-
... More
Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required.
12
-
-
... More
Ball Valve / Thermostatic flow control valve.
25mm dia.
38
-
-
... More
With float glass panes of 5.50 mm thickness
16
-
-
... More
25 mm dia nominal bore
40
-
-
... More
Providing and laying cement concrete 1:6:12 (1 Cement : 6 coarse sand :12 graded brick aggregate 40 mm nominal size) in depressed portion of toilets, kitchen and balconies etc.
10
-
-
... More
Two lights points controlled by one 6A switch
50
-
-
... More
Supply and wiring for 6A socket outlet with 2 runs of 2.5 sq. mm FRLS insulated multistranded Copper wire and 1 run of 1.5 sq. mm FRLS insulated multistranded Copper earth wire in and including heavy duty 25 mm dia FRLS PVC conduit concealed in wall after necessary chase cutting with finishing / ceiling / below work stations along with required accessories, supply and fixing of 2 nos. 6A 5 Pin socket with one no. 6A modular switch in anodized GI box and front plate complete with fixing accessories etc. as required.
40
-
-
... More
CHAPTER - V STEEL WORK Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:
Profile C
Fixing with adjustable lugs with split end tail to each jamb.
210
-
-
... More
Providing and fixing unplasticised P.V.C connection pipe with PTMT Nuts coller and bush of approved quality and colour.
15mm nominal bore with 45cm length
92
-
-
... More
Writing Table of size 900 X 600 X 750 mm made out of 19 mm thick one side teak block board on sides & front. Top to have 19 mm thick commercial board finished with 1mm thick laminate having 2 nos drawer along with teak wood footrest of size 65x30mm including two or more coat spirit polish including wood filler
15
-
-
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand (Manufactured)), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
155
-
-
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
956
-
-
... More
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.
20mm cement plaster
406
-
-
... More
22W LED BATTEN LIGHT WALL/SURFACE MOUNTED MAKE-PHILLIPS CAT NO. BN 021 LED25S 6500 PSU GR S1 2500 lumen output. or equivalent
8
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
All kinds of soil
2471
-
-
... More
Supplying and making indoor end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Cu. CABLE WITH Cu. LUGS
4C X 6 sqmm
6
-
-
... More
LIGHT / FANS FIXTURES
Supplying, installation, testing and commissioning of following type Energy efficient LED light fixtures complete with LED Control gear/ LED driver suitable to the respective fixture(not less than 85 Lumens /watt) all pre wired upto the terminal block. All fixtures shall be supplied with lamps/Led drivers etc.(Seperate rate for LED Driver is not allowed) complete as required. MAke - PHILLIPS , WIPRO , PANASONIC 10W MIRROR LIGHT MAKE-PHILLIPS CAT NO. BN021 LED 10S- 6500 PSU GR S1 or equivalent
26
-
-
... More
Suspended floors, roofs, landings, balconies and access
platform
1560
-
-
... More
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge.
1407
-
-
... More
Supply of roof / mesh Conductor holder for holding of 8 mm round conductor. The minimum height of the conductor holder should be 85 mm PVC clear height between roof and conductor and install at every 1 mtr. Make: JMV
626
-
-
... More
Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263mm and width as 165mm with minimum 112 mm space between protruded legs having 2mm thread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138mm as per standard drawing and suitable to with stand the bend test and chemical resistant test as per specification and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manhole with 30x20x15 cm cement concrete block 1:3:6 (1cement : 3coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design
12
-
-
... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
28
-
-
... More
Supply and installation of following size Krone connectors in MS box complete as required.
20 Pair
1
-
-
... More
40mm dia.
1
-
-
... More
Providing and fixing 5mm thick beveled edge mirror of superior glass of approved quality and of required shape and size, fixed with teak wood beading / pvc of size 40x20mm with french spirit polish, 6mm thick water proof ply wood on back of the mirror etc. complete with two or more coats of black bituminous paint at the back of ply.
21
-
-
... More
15 mm cement plaster on the rough side of single or half brick wall of mix
1:6 (1 cement : 6 fine sand)
1841
-
-
... More
Size of Tile 800x1200 mm
16
-
-
... More
4 Way VTPN MCBDB with 100A, 25kA 4 Pole MCCB as incomer and 3 Nos 63A TP MCBs, 1 Nos 40A TPN MCBs, as outgoing.
1
-
-
... More
Supplying and fixing of precoated Zincalume/Galvalume sheet roofing of 0.5mm TCT -AZ-150, 550 mpa (Alumunium Zinc Alloy couting of 150 gms, per sqm total on both sides) as per AS: 1397 in cover width of 1000-1020 mm, (size, shape and pitch of corrugation as approved by Engineer-in-charge).The end rib shall be designed for anti-capillary action, to avoid any seepage of water through the lateral overlap.The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT), Hi-strength steel with min. 550 MPa yield strength.The raw material shall be of Tata BlueScope ,Kirby .The steel sheet shall be fastened with 25 μm zinc-tin alloy coated, Hex head, self-drilling screw as per AS 3566-2002 Class 3 fasteners of approved make with EPDM washer as per the requirement considering the profile shape and design load.Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportaion and should be suppplied in single length upto 12meter or as directed by Engineer-in-charge.
405
-
-
... More
Extra for depth for manholes
Size 90x80 cm
With Solid Blocks
2
-
-
... More
Supplying of Aluminium stand (cloth) collapsible/folding type complete all as per direction of Engineer-in-Charge.
18
-
-
... More
Supply of wooden Shoe Rack of size 900x400x900mm made out of 25x25mm MS tube frame & CR pipes of 12mm dia duly painted etc. all complete all as directed by the Engineer-in-Charge.
12
-
-
... More
Call bell point with 6A Bell push with Buzzer
18
-
-
... More
3.5 core 95Sqmm
6
-
-
... More
Supply of Plastic Chair with cushions & arms (Moulded plastic chair) of make Neelkamal/Supreme or equivalent as per sample approved by Engineer-in-charge. The rate is inclusive of the cost of transportation to site.
100
-
-
... More
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.
23
-
-
... More
Supply Installation of of GI Strip of Size 32X6 to connect earth pit with DG S sets . All Accessory should be supply along with Strip. Supply of SS nut, bolt and washer should supply with strip as per drawing & required.
30
-
-
... More
50mm dia nominal bore
110
-
-
... More
Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
30
-
-
... More
1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone
aggregate 40 mm nominal size)
662
-
-
... More
Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core.
2
-
-
... More
Providing and fixing square mouth SW gully trap class SP-1 complete with CI grating brick masonry chamber and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg. as per standard design.
150x100mm size P type
With Solid Blocks
6
-
-
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
224
-
-
... More
18W LED Cove Light (Make: Phillips cat No. 31059/31 or equivalent) with all fixnig accessories.
15
-
-
... More
CHAPTER - XII : FURNITURE
Single Bed of size 1950 X 930 X 325 mm made out of teak wood side of size 120 X 30 mm Head and Foot board with 70 X 25 mm second class hard wood frame covered unit 4 mm thick one side teak ply and other side 4 mm thick commercial ply edges to have 40 X 6 mm thick teak wood lipping and 50 X 25 mm support of second class hard wood and 12 mm thick commercial ply on bed top finished with spirit polish
32
-
-
... More
Down Conductor :
Supply of 8 mm dia Aluminium round conductor for Down conductors to be installed on vertical façade of mesonery / glass / metalic work. Make: JMV
87
-
-
... More
CHAPTER - XIX EXTERNAL LIGHTING Supplying and installation of sewaged type welded steel tubular pole 9M height with suitable curved single arms of 1.5 mx48.4mmx3.2mm-(LengthxODXThickness) with over all length of section- Botttom section: 4.5m x 114.3 mm x 5M, Middle section: 88.9 mmx 4.05 mmX2M , TOP section :2M x 76.1 mm x 3.25 mm - with IS- 2713-80 with latest amedment 410-SP-26 with 300x300x6 mm M.S. base plate as per drawing and specification including one coat of rad oxide and two coats of approved colour painting and ckt marking including suppling and erection of 1:3:6 ratio cement concreate foundation with collar including excavation in all kind of soil and required as per specification.
22
-
-
... More
Providing and fixing in position flexible connections, complete with split steel retaining rings, single unfilled arch,, integral rubber flanges, fixing bolts, nuts, washers etc. as specified. The flexible pipe section shall have reinforcement of high tensile cord and non-migrating metal and should have NEOPRENE cover to protect the body from atmospheric conditions and/or mechanical damages of following sizes as required.
80mm dia
6
-
-
... More
51 mm [9 mm thick insulation]
110
-
-
... More
4 Runs of 6 sq.mm wires with 2 Run of 4 sq.mm in 32 mm dia PVC conduit ( For submain)
160
-
-
... More
18W LED SURFACE MOUNTED MAKE-PHILLIPS CAT NO. SM251C LED20S PSU 6500 OD WH 2000 lumen output. or equivalent
6
-
-
... More
25 mm dia nominal bore
40
-
-
... More
Cable End termination of the following XLPE insulated PVC sheathed aluminium/copper conductor armoured cables of 1100V grade including supplying and fixing of bimetallic crimping lugs, double compression glands with earthing.
4Cx6sqmm aluminium conductor armoured cables
44
-
-
... More
Providing & fixing deocrative six wall hook rack made from high quality/grade stainless steel of matt gloss surface finish including necessary C.P. brass screws complete.
17
-
-
... More
Providing and fixing stainless steel handles of approved make, confirming to grade AISI-304 in 18/8 composition with nuts and screws etc. complete :
125 mm long and 10 mm Dia
88
-
-
... More
Providing and fixing M.S. round holding down bolts with nuts and washer plates complete.
85
-
-
... More
Dressing Table with mirror of size 1050 X 400 X 600 mm made out of 19 mm thick commercial board, top to have 1 mm thick laminate, sides to have 4mm thick teak veneer having 3 nos. of drawers on LHS/RHS side and other side to have cabinet with shutter, back to have 6mm ply all exposed edges to have teak wood beading including necessary hardware and finished two or more coat spirit polish including wood filler .
15
-
-
... More
27W LED RECESSED MOUNTED LUMINAIRES MAKE-PHILLIPS CAT NO. RC380B LED30S 6500 G4 L60 W60 PSU OD 2800 lumen output. ( Dimensions 595 x 595 x 68) or equivalent
31
-
-
... More
Supply of SS bellow for DG set silencer
125 KVA DG set
1
-
-
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineerin- Charge.
60mm thick Cement concrete paver block of M-35 grade with approved colour, design & pattern.
120
-
-
... More
Three lights points controlled by one 6A switch
20
-
-
... More
MV PANEL
Supply, installation, Testing and Commissioning of 3 phase and Neutral 415V 4 wire Free Standing Floor mounted Indoor panel MV panel made out of 2mm thick CRCA sheet for main frame and 1.6mm thick for partitions after seven tank process and painting with Epoxy powder coating. The panel shall consist of suitable rating TPN Aluminium busbar (at the rating of 0.8A/Sq.mm) supported with DMC/ SMC barriers and color coded with Heat shrinkable sleeves. The Metering shall be provided as specified. The panel shall have Short circuit withstanding capacity of minimum 50KA and consist of the switchgear as mentioned below. The panel shall be got fabricated from manufacturers with CPRI Test certificate only.
1
-
-
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
Fixed to openings / wooden frames with rawl plugs (designation 10 No.) etc., all complete
2180
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness
469
-
-
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.
With Stainless Steel cover plate minimum 1.25 thickness
14
-
-
... More
Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
Hot finished welded type tubes
6170
-
-
... More
0.8 mm (22 gauge) GSS
40
-
-
... More
Dressing Stool of size 375 X 375 X 400 mm made out of 18 mm thick commercial board seat to have 50 mm rubber cushion covered with fabric and 12mm foam on all sides duly upholstered with fabric mounted on castor wheels
15
-
-
... More
Dining Table for made out of teak wood frame (side rail 90 X 30 mm & legs 70 X 70 mm) top edge with 38 mm thick (19 mm + 19 mm) commercial board and 1 mm thick laminate all exposed edges to have lipping finished with two or more coat spirit polish including wood filler For 6 persons of size 1800 X 900 X 750 mm
5
-
-
... More
Supply and fixing of TV outlet with anodised GI box with front plate etc. complete as required
27
-
-
... More
Supply and laying of 80 mm dia. Class "B" GI pipes laid 600mm below ground level including excavation, back filling etc. complete as required.
40
-
-
... More
10W LED DOWNLIGHT MAKE-PHILLIPS CAT NO. DN092B LED10S-6500 PSU WH S1 1000 lumen output or equivalent
35
-
-
... More
Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of stainless steel lever handles with necessary screws etc. complete (best make of approved quality).
30
-
-
... More
65mm butterfly valve
8
-
-
... More
5250 Kcal/Hr./1.5 TR (600 CFM with 15mmSp)
14
-
-
... More
Supply of X - Connector for making cross joint of 8 mm dia. Aluminium Conductor to 8 mm dia Aluminium conductor on parapet wall, roof and vertical facade of mesonery / glass / metalic work. Make: JMV
10
-
-
... More
Providing and fixing 8 SWG dia G.I. wire on surface or in recess for loop earthing as required.
250
-
-
... More
Computer Table of size 1200 X 600 X 750 mm high made of 19 mm thick commercial block board. side, front and top finished with 1mm laminate having sliding tray for key board, and edges to have teak wood beading. Exposed surface to be finished with two or more coat spirit polish including wood filler
6
-
-
... More
Shelves (Cast-in-situ)
30
-
-
... More
Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including unplasticised - PVC moulded fittings/accessoriesto IS : 13592 Type jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes. Inclusive of all fittings.
160 mm diameter
107
-
-
... More
Supply Installation of of copper Strip of Size 25X6 to connect earth pit with DG S sets . All Accessory should be supply along with Strip. Supply of SS nut, bolt and washer should supply with strip as per drawing & as required.
30
-
-
... More
32 mm [9 mm thick insulation]
120
-
-
... More
Supply and installation of following sizes 2 mm thick GI perforated cable tray with GI cover along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall/ceiling etc. complete.
100 x 50 mm 2 mm thick
20
-
-
... More
Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).
15
-
-
... More
CHAPTER - VII ROOFING
Surface preparation:-Cleaning of RCC roof by removal of dust ,dirt,laitance,followed by ponding will be done on the application surface. Any surface cracks needs to be into U groove and sealing it with polymer mortar in 1:4 ratio (cement: sand)admixed with Dr Fixit pidicrete URP or equivalent at 5% by weight of cement . All corner joints will be cut open, followed by sealing the same with the same polymer mortor all in complete. Cemen ,sand, aggregate,water will be supplied by contractor.Providing and applying "Dr Fixit Flexi PU 270(I) or equivalent high performance pure polyurethane based, single component, elastomeric anti root , seamless, waterproof memberance,applied in 2 coats of total Systems thickness of 1.50 mm and having an elangation capacity of over 500% , tensil strength of 4 N/mm2 .and the coating will be terminated up to 300 mm on the parapet wall, all in complete. providing and laying 120-150 gsm geotextile on the cured memberane surface providing and laying protective screed concrete (M20 grade ) with admixture of recomended propertion and average 50 mm thick(thickness can vary depending up on span of area ) . All in complete (including welded mesh 2mm dia and 100mmX100mm aparture but M-20 Grade sceed will be paid separately)
1064
-
-
... More
Septic tank in R.C.C. including excavation in all kind of soil, P.C.C. in 1;3;6 / 1:2:4 R.C.C. - M25 work in foundation walls and slabs, FE-415 TMT Reinforcement, PVC incapsulated orange colour foot rest, R.C.C. Precast manhole cover shaft, sludge chambers etc. complete with waterproof plaster inside/outside & 40mm Thick PCC flooring as per enclosed drg.
50 users.Size = 4.5 x 2.0, Liquid depth 1.1 m)
1
-
-
... More
Conference Table ('U' Shaped) to seat for 21 persons made out of 19 mm thick commercial board with 3.5 mm thick Teak veneer on top and top edging will be 35 x 75 mm thick with half round moulding. 19 mm thick commercial board tapered foot rest, vertical member with 19 mm thick commercial board back with 19 mm thick commercial board including 3.5 mm thick Teak veneer All exposed edges to have teak wood beading including melamine polishing
1
-
-
... More
32mm dia nominal bore
186
-
-
... More
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.
M.S. tube
332
-
-
... More
15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall.
342
-
-
... More
Providing and placing on terrace (at all floor levels) Polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement amd making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
3000
-
-
... More
Supplying and making indoor end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. AL. CABLE WITH AL. LUGS
4C X 25 sq. mm (28mm)
2
-
-
... More
2 Runs of 6 sq.mm wires with 1 Run of 4 sq.mm in 25mm dia FRLS PVC conduit ( For AC Sockets).
455
-
-
... More
4C X 4 sqmm
140
-
-
... More
0.8 mm (22 gauge) GSS
20
-
-
... More
Y-Strainer
65mm dia.
3
-
-
... More
Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete.
25 mm diameter
85
-
-
... More
CHAPTER - XI : DRAINAGE
Providing and fixing uPVC pipes 6Kg/cm2 (IS: 4985) including all fittings (plain or door) e.g. bends on any angle, sockets, junction, cowls, offsets, access pieces, jointing with rubber ring/solvent cement joints including cutting chase or holes in walls and floors where required and making good the same. (for Soil, Waste ) (Make : Supreme , Prakash or equivalent )
100 mm diameter
310
-
-
... More
Extra for Providing 2 nos Anti slippery Grooves of size 6 mm x 6 mm in stone flooring in treads of steps as per direction of Engineer-in-Charge.
70
-
-
... More
MOULDED SOCKET OUTLET FOR HWG
Supply, installation, testing & commissioning of 32A,TP, MCB,10kA, in factory fabricated powder coated metal box.
3
-
-
... More
Weather shade, Chajjas, corbels etc., including edges
154
-
-
... More
Size395x395mm
220
-
-
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
125 mm
32
-
-
... More
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete.
77
-
-
... More
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured).
Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)
470
-
-
... More
3.5 core 300 Sqmm
2
-
-
... More
Lintels, beams, plinth beams, girders, bressumers and
cantilevers
1585
-
-
... More
Providing and fixing up to floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete :
1:3:6 (1 Cement: 3 coarse sand(zone-III) : 6 graded stone
aggregate 20 mm nominal size).
480
-
-
... More
Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fitting complete . Flexible pipe 40 mm dia
6
-
-
... More
Providing and fixing stainless steel Sliding door bolts of approved make, confirming to grade AISI-304 in 18/8 composition with nuts and screws etc. complete : 300x16 mm
10
-
-
... More
4 Runs of 10 sq.mm wires with 2 Run of 6 sq.mm in 32 mm dia FRLS PVC conduit ( For submain PDB & ACDB).
240
-
-
... More
Supply, fabrications and fixing of structural steel.
1200
-
-
... More
Supply, installation, testing and commissioning of Motorized (ON-OFF Type) duct mounted GI volume control damper with enthalpy sensor and necessary control wire (minimum 1.5 sq. mm) for integration within AHU room
1
-
-
... More
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.
1180
-
-
... More
Executive Table of Size 1800 X 900 X 750 mm high made out of 19 mm thick commercial block board finished with 3.5 mm thick teak veneer of approved quality on top,Sides & front having 3 drawers running on telescopic channel and with locking arrangement for one drawer, all exposed edges to have teak wood lipping. Foot rest of teak wood of size 65 X 30 mm including inner surface and all exposed wooden surface finished with two or more coat of spirit polish including wood filler
1
-
-
... More
All works above plinth level upto floor V level.
509
-
-
... More
250 mm diameter S.W. pipes pipe / RCC Pipe
20
-
-
... More
Supply and laying of UTP 4 Pair CAT 6 LAN Cable in existing conduit complete as required.
455
-
-
... More
250x16 mm
38
-
-
... More
Supply of Expansion piece of made of 8mm Aluminium at every 20 mtr to maintain the flexibility to the conductor due to heat. Make: JMV
36
-
-
... More
EARTHING
Supply of Earthing termination made of copper-bonded rod of 10 feet length,14.2 mm dia. (Minimum copper bonding shall be 0.25mm) along with Rod-to-Conductor connectors, Earth enhancement material, Pit Cover and other accessories as required and as per specification and other applicable codes. Make: JMV
2
-
-
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
200x10 mm
16
-
-
... More
CHAPTER - X : WATER SUPPLY
Providing and finxing G.I. pipe (medium) complete with G.I. fittings and clamps, including cutting and making good the walls etc.
Internal work - Exposed on wall 20 mm dia nominal bore
20
-
-
... More
Supplying and laying of following sizes 1100V grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification in trenches/pipe, cable trays, ducts, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning.
3.5 core 185 Sqmm (Aluminium) conductor armoured cables
70
-
-
... More
MAIN HVAC PANEL
Installation, Testing and Commissioning of dust, damp and vermin proof free floor /wall mounted, Indoor outdoor type factory built sheet steel enclosed modular construction extendable panel, suitable for operation on 415 ±10% volts, 50 Hz AC 3 phase 4 wire system fabricated out of suitable sized square tubular section and covered with CRCA sheet steel of 2mm thick for frame work and covers, 3mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, complete with Aluminium bus bars, inter-connection with copper conductor wires / aluminium strips, neutral links, earth bus etc. including control wiring with 1.5sqmm. & 2.5sqmm. PVC insulated FRLS copper conductor S/C cable for voltage & current respectively, cable alleys, cable gland plates in two half, etc. necessary metering protections & indications and mounted with the following switch gears etc. complete as required.
(Each MCCB will have variable current setting for over current and short circuit, front extended lockable handle, pad lockable in off position, indication light for ON, shrouding on incomer side, termination shall be suitable for aluminium bus bars. All MCCBs of 250 A and above shall be microprocessor based only.
1
-
-
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
21
-
-
... More
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)
85
-
-
... More
Exhaust fan point controlled by one 6A switch & ceiling Rose
21
-
-
... More
Supply, Installation, testing and commissioning of following outdoor type Feeder Pillar with relevant IP 54 and suitable for 415 volts, 3 phase, 4 wire and 50HZ AC power supply totally enclosed compartmentalized, fabricated with 2 mm thick sheet, complete with aluminium bus bars (both for main and neutral), incoming/outgoings, cable terminations, inter-connections, indication lamps, pedestal frame on RCC foundation/platform of 300 mm height above GL, necessary earth connections conforming to relevant IS codes, specification and drawings. - FP-SL-1
Incoming
40 4P MCCB - 25KA-1no
Bus bar
63A, 415V, 3ph, 4wire AL Bus bar
Outgoing
40A-DP MCB - 10 KA - 3 nos
1 No-32 Amps TPN MCB - 10KA- with & Time switch with contactor& controlling of 6no 10 amps TP MCB of 10KA
1
-
-
... More
Supply and wiring with the following size 1100V grade FRLS insulated multistranded Copper conductor wires in and including suitable size heavy duty FRLS PVC conduit concealed in wall after necessary chase cutting with finishing / surface on wall / ceiling including all accessories such as junction boxes, bends elbows and end terminated with suitable lugs. 2 Runs of 4 sq.mm wires with 1 Run of 2.5 sq.mm in 25 mm dia FRLS PVC conduit (For 16A Sockets).
429
-
-
... More
7000 kcal/Hr./2.0 TR (800 CFM WITH 25mmSP)
4
-
-
... More
65mm dia nominal bore
86
-
-
... More
Inside size 120x90cm and 90cm deep including C.I. cover with frame (medium duty) 500mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg).
Withcommon burnt clay FPS (non modular)bricks of class designation 7.5.
4
-
-
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes ,
250
-
-
... More
3 CORES Cu. CONDUCTOR
3C X 4 sqmm
140
-
-
... More
Roof Conductor for Parapet: Supply of 8 mm dia Aluminium round conductor for air termination network at parapet wall. Make: JMV
626
-
-
... More
AXIAL FAN
Supply, installation, testing and commissioning of Axial Flow fan of the following capacity of approved make and specification. 3300 CFM, 15mm SP WG with 3P for Kitchen Exhaust Air
1
-
-
... More
Providing and fixing 3 mm thick aluminium composite panel cladding of required size to Prelaminated Flush door shutter including fixing etc. complete as per direction of Engineer-in-charge.
18
-
-
... More
Size of Tile 800x1200 mm
Make Johnson (Marbonite- HARMONY, ETHAN, DAZZLE, CRYSTALINE, Porselano- ROYAL BEIGE, DESSERT PEARL, CLASSIC SUPREME/Orient Bell (PGVT GENESIS BEIGE, PGVT SARA GOLD, MERLIN CREMA, ) / Kajaria Equivalent/ Somany Equivalent
153
-
-
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
50 to 80 mm nominal bore
1
-
-
... More
Supply and fixing of Data outlet (RJ45) with anodised GI box with front plate etc. complete as required
13
-
-
... More
3.5 core 300 Sqmm (Aluminium) conductor armoured cables
300
-
-
... More
Two Piece Closet Constellation Hindware model 20024 & vitreous china cistern Hindware model 21038 OR approved equivalent.
2
-
-
... More
25mm dia nominal bore
340
-
-
... More
250 mm dia. R.C.C. pipe
40
-
-
... More
Providing and fixing uPVC HDPE pipes confirming to IS 4984-1995 including all fittings, cutting and making good the walls etc. (for waste connection).
32 mm dia nominal bore
45
-
-
... More
For 4 persons of size 900 X 900 X 750 mm
2
-
-
... More
High back Dining Chair of size 450 X 400 X 835 mm made out of teakwood frame work, 12mm thick commercial ply with 50 mm thick rubber foam in seat, duly upholstered with fabric of approved shade & quality including two or more coat spirit polish including wood filler .
38
-
-
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
112
-
-
... More
40 mm dia nominal bore
2
-
-
... More
3300 CFM, 15mm SP WG with 3P for Kitchen Fresh Air
1
-
-
... More
Fresh Air/Exhaust Louvers
2
-
-
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
986
-
-
... More
Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.
49
-
-
... More
Providing and laying anti skid Ceramic glazed floor tiles (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as white, Ivory, Grey, Fume, Red Brown, laid on 20mm thick cement mortar 1:4 ( 1cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.
Size300x300mm Make:- Orient Bell (Burg ,Brina & Galaxy series) / spa series/country series) / Jonnson (Anti skid series) / Kajaria(digtal series)./Somany (Plain star series / corsa series).
196
-
-
... More
CHAPTER -IV WOOD / ALUMINIUM WORK
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).
Second class teak wood
2
-
-
... More
150 mm diameter S.W. pipes pipe / RCC Pipe
100
-
-
... More
Providing and fixing C.P. Brass towel ring (200 mm Dia ) ncluding cutting necessary C.P. brass screws complete.(Jaquar model no. AQN-7721 Towel Ring Round /approved equivalent).
28
-
-
... More
Supply and laying of 32mm dia, heavy duty FRLS PVC conduit concealed in wall / ceiling / floor including all accessories such as Junction boxes, conduit bends, etc. completed as required.
30
-
-
... More
Extra for pre finished double thickness ( provide 75 mm wide extra stone strip fixed with approved quality adhesive at nosing end ) nosing to treads of steps of marble stone / Granite stone and finish the nosing properly .
83
-
-
... More
20mm cement plaster
406
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
3465
-
-
... More
Providing & fixing in position CP soap dish.(Jaquar model no. 1131/approved equivalent).
28
-
-
... More
Size 120x90cm
With Solid Blocks
1
-
-
... More
Centre Table of following sizes made out of teak wood frame, side with 70 X 25 mm teak wood and 45 X 45 mm teak wood decorative legs, including 20 X 20 mm teak wood moulding all exposed surfaces with two or more coat spirit polish including wood filler (a) Of Size 1050 X 525 X 400 mm and top to have 19 mm thick commercial board with 1mm thick laminate.
9
-
-
... More
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand (Manufactured)) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :
Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
14
-
-
... More
3.5 core 95 Sqmm (Aluminium) conductor armoured cables
150
-
-
... More
Providing and laying Double Charged vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.
Size of Tile 600x600 mm
Make Johnson (Marbonite- VIVA COTTA , TRANQUIL ventinos series ,Nuvolta series, SERDINO series, LUCIA FLAMINGO/Orient Bell (DC Royale statuaro, ODP EBANO BEIGE, ODP KEKKAR BROWN) / Kajaria (sandune series K-6801-6805, orion series K6505-K6511) / Somany(Rapid series).
587
-
-
... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
Granite work
49
-
-
... More
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge.
20
-
-
... More
Providing and fixing C.P. bass angle valve for basin mixer and geyser points of approved quality conforming to I.S:8931 a) 15 mm nominal bore. (Jaquar model no. FLR-5053 N /approved equivalent).
15 mm nominal bore
92
-
-
... More
Earth Termination Network:
Supply of Earthing termination made of copper-bonded rod of 10 feet length,14.2 mm dia. (Minimum copper bonding shall be 0.25mm) along with Rod-to-Conductor connectors, Earth enhancement material, Pit Cover and other accessories as required and as per specification and other applicable codes. Make: JMV
6
-
-
... More
Supply, Installation, Testing, & Commissioning of 10mmdia. Automatic air vent in brass construction complete with nipples, union etc. as required at all high points in the pipe lines. The valve shall be such as to have non-return valve as integral part of the vent. make Anergy.
10
-
-
... More
Supply and fixing of 146x238x111( KVPC -) polycarbonate thermoplastics enclosure-junction Box -with I.P. - 65- protection - with Cable hinged cover of approved design complete having gasket of internally embedded- & made of polyeutherene & should be weather proof, rust proof, dust proof, water proof- box, shall be tested as per -IEC-60670-2/60670-22 . The box shall have self threaded holes & provision for mounting din rail. with 2 nos. cable gland Including supplying & fixing crimping 2 Nos. lugs, & 1 nos. 32A connector 6 way for looping the incoming and outgoing cables and also connection of the street light one 6A SP MCB including connection of 4cx 6 sq.mm cable etc. as required.
22
-
-
... More
Pressure Gauge (Range 0 to 10 kg/cm²)
50
-
-
... More
Supply, fabrication and installation of M.S. Structural Steel supports for exhaust pipe, fuel pipe etc. including supply and applying of enamel paint of approved shade after one coat of steel primer of reputed company.
100
-
-
... More
Balancing Valve 65mm dia.
3
-
-
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
150 mm dia. R.C.C. pipe
100
-
-
... More
Stairs, (excluding landings) except spiral-staircases
20
-
-
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 100 mm diameter S.W. pipe / RCC Pipe
20
-
-
... More
3C X 4 sqmm
12
-
-
... More
INCOMING
1 No. Incomer 63 Amps 4P MCCB with microprocessor based releases for O/C, S/C, 3 Nos. phase indicating lamps to show the incoming power with control 6A TP MCB,and 1 no. digital multifunction meter with matching cast resin CT's.
Bus Bars
One set 100 Amps 3 phase, 415 volts, four wire, 50 Hz aluminium bus bars in suitable bus bar chamber with colour coded PVC tapes.
Outgoings:
3 Nos. 40 Amps MCB 4P for Hot water heater.
3 Nos. 40 amps MCB 4P for Pumps
2 Nos. 20 amps MCB TP for Axial Fan
1 No. 40 Amps MCB 4P spare.
1 No. 20 Amps MCB TP spare.
-
-
-
... More
PROPELLER FAN
Supply, installation, testing and commissioning of axial type Propeller fan with gravity louvers of the following capacity of approved make and specification. 50 cfm dia 200mm
4
-
-
... More
Supplying & laying of following sizes 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification in existing laid in ground including cost of digging upto required depth, 150 mm sand all around the cable, brick protection and back filling, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning as required.
4Cx6sqmm aluminium conductor armoured cables
220
-
-
... More
Providing and fixing stainless steel pull bolt lock of approved make, confirming to grade AISI-304 in 18/8 composition with nuts and screws etc. complete :
18
-
-
... More
Revolving and tilting Medium Back Chair of size 515 X 515 X 800 mm high having moulded 12 mm hot pressed ply with 60 mm thick high density PU seat and back covered with approved quality of fabric alongwith PU full arms mounted on five castors pedestal
30
-
-
... More
Double Bed of size 1950 X 1800 X 325 mm, Head & foot board made out of 70 X 25 mm Second class hard wood frame covered with 4 mm thick teak veneer inside and other side with 4 mm thick commercial veneer, edges to have teak wood lipping side to have 120 X 35 mm teak wood with 11 mm thick commercial ply supported on 40 X 25 mm hard wood, finished two or more coat of spirit polish including wood filler
2
-
-
... More
20 mm dia. nominal bore
2410
-
-
... More
Providing and fixing stainless steel tower bolts of approved make, confirming to grade AISI-304 in 18/8 composition with nuts and screws etc. complete :
200x10 mm
44
-
-
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidated each deposited layer by ramming, watering, etc. and disposing of surplus excavated soils directed, within a lead of 50m. All kinds of soil
Pipes, cables etc. exceeding 80mm dia. but not exceeding 300 mm dia.
155
-
-
... More
Providing and fixing wash basin with CI brackets,Basin Mixture ,32mm CP brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever required. W.B Hindware model 10080
White vitreous china wash basin(round/oval under counter) size 580 mm x 430 mm with basin Mixture Mixer of Make Jaquar -CON-167B or Equivalent (Bottle trap-Jaquar model no. ALD 769/approved equivalent, CP waste-Jaquar model no. ALD 709/approved equivalent,).
15
-
-
... More
50 mm dia nominal bore
10
-
-
... More
Good Earth laying & compacting
1
-
-
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately).
(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately).
All works upto plinth level.
1209
-
-
... More
75 mm
10
-
-
... More
Supply, installation testing and commissioning of horizontal type MCB Double door Distribution boards dust and vermin protected and AC supply operation including incoming MCB/ ELCB / RCBO as per specifications and required capacity Neutral bar and Earth Terminal complete as required and installed in concealed in wall after necessary chase cutting with finishing / surface on wall including all fixing materials required. All MCBs shall be "C" Curve.
8 Way TPN MCBDB with 32A, 100mA 4 Pole RCBO as incomer and 24 Nos 6-32A SPMCB as outgoing.
4
-
-
... More
300 mm diameter S.W. pipes pipe / RCC Pipe
15
-
-
... More
Supplying and fixing 40mm dia GI pipe on the pole for cable entry to junction box as required.
44
-
-
... More
250 CFM, 10mm SP WG with Single phase motor for staff toilet exh.
1
-
-
... More
6Way TPN MCBDB with 63A, 100mA 4 Pole RCBO as incomer and 18 Nos 6-32A SPMCBs as outgoing. (ACDB)
3
-
-
... More
Supply, Installation , testing and commissioning of fan coil units of specified capacities and air flow as per the specifications, complete with auxillary drain pan.
Fan coil unit shall be supplied with Heating Coil and approved make of factory fitted adequately sized insulated (with nitrile foam) thermostat for fan speed control. Cost of fan coil unit shall be inclusive of approved make room thermostat (heatig and cooling, with fan speed control), pre-filter and associated MS conduiting and wiring etc.between the thermostat and valve.
3500 Kcal/Hr./1.0 TR (400 CFM with 15mmSp)
13
-
-
... More
Supply and laying of RG 11 Cable in existing conduit complete as required.
150
-
-
... More
Supply of Test Clamp to disconnect the down conductor from the earth termination network for regular checks of the earth termination resistance value. Make: JMV
6
-
-
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design :
250 mm diameter S.W. pipes pipe / RCC Pipe
20
-
-
... More
Supplying and making end termination with brass double compression gland and aluminium for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3.5 core 185 Sqmm
2
-
-
... More
Supply, installation, testing and commissioning of the single phase heavy duty grease filled double ball bearing, aerodynamically designed heavy gauge aluminium blades, copper wounded, required length down rod, capacitor and impregnated silicon stamping motor etc.a 1400 mm sweep, brilliant white/As directed by Engineer-In-Charge (without regulator).
24
-
-
... More
Cable
Supply of the following 1100 volts grade, Aluminium/Copper conductor, XLPE insulated, PVC sheathed, steel armoured/Unarmoured cables as per IS 7098 Part-1 and as per technical specifications of this tender and directions of Engineer-in-Charge.
4 CORES Cu. CONDUCTOR
4C X 6 sqmm
80
-
-
... More
50mm butterfly valve
4
-
-
... More
DUCT LINE ACOUSTIC TREATMENT
Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc. complete as required and as per specifications.
25mm thick
130
-
-
... More
Surge Protection Device:
Supply of Class C/Type II Single Phase Surge Protection Devices as per IEC 62305-4 and tested according to IEC 61643 – 11, DIN Rail mountable with Maximum Continuous Operating Voltage of 320 V and Voltage Protection Level of 1.3 kV (L-N). Response Time should be less than 25 ns per pole and less than 100 ns between neutral to protective earth. The maximum impulse discharge surge current should be 40 kA (8/20 µs) per pole and 60 kA (8/20 µs) neutral to protective earth. The surge protection devices shall be enclosed in polycarbonate enclosure of IP 65 rating. (For Sub Distribution Box & Each floor 1 SPD is required) Make: JMV
1
-
-
... More
Supply and wiring similar to item 1 above but for ceiling fan point including GI Box and controlled by one 6A switch, 100W step type Electronic regulator with Concealed MS fan hook box with suitable hanging rod.
48
-
-
... More
100 mm
212
-
-
... More
CANVAS CONNECTION
Supply, Installation,Testing and commissioning of doble layer canvas connection with 1/2 hr. fire rating as per specification (For FCU and AHU Connection to duct).
38
-
-
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.
Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
257
-
-
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 20 cm x 20cm and weighing not less than 995 grams.
15
-
-
... More
Supply of T - Connector for making Tee joint of 8 mm dia. Aluminium Conductor to 8 mm dia Aluminium conductor on parapet wall, roof and vertical facade of mesonery / glass / metalic work. Make: JMV
56
-
-
... More
300 mm dia. R.C.C. pipe
15
-
-
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:
New work (Two or more coats applied @ 1.43 ltr/10 sqm
over and including priming coat of exterior primer applied
@ 2.20 kg/10 sqm)
1675
-
-
... More
Providing & fixing Sink Mixer with Swinging Casted Spout (Wall Mounted Jaquar model CON-319 KN/approved equivalent) with 450mm long copper pipes & brass nuts.
1
-
-
... More
Supply and install balancing tank 990 ltr capacity made out of 3mm thick MS sheet. duly insulated with 50mm thick thermocol of density 16/ Cubic mtr and insulated with 26 gauge aluminium sheet
1
-
-
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing :
1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
11
-
-
... More
150x10 mm
16
-
-
... More
Supply and wiring for 6A socket outlet with 2 runs of 2.5 sq. mm FRLS insulated multistranded Copper wire and 1 run of 1.5 sq. mm FRLS insulated multistranded Copper earth wire in existing raceway/conduit. supply and fixing of 6A 5 Pin socket with 6A modular switch in anodized GI box and front plate complete with fixing accessories etc. as required. (Independent)
123
-
-
... More
Superior Sofa made out of 50 X 30 mm thick hard wood internal frame for seat and back and 100 X 30 mm for arm rest, flat nylon mixed rubbrised newar strips on seat & back, cladded with high density rubber foam and 100 mm thick loose cushion on seat, 75 mm thick cushion on back duly upholstered with approved quality of fabric/leathrite Three Seater
9
-
-
... More
Supplying chemical emulsion in sealed containers including delivery as specified.
Chlorpyriphos/Lindane emulsifiable concentrate of 20%
673
-
-
... More
Office Table of size 1500 X 750 X 750 mm made out of 19 mm thick commercial block board with 1 mm thick laminate of approved shade on top. Sides & front to have 3.5 mm thick teak veneer. Edges to have 18 X 3 mm teak wood beading along with 3 drawers running on telescopic channel and with locking arrangement for one drawer all exposed edges to have teak wood lipping. Foot rest to be made of teak wood of size 65 X 30 mm. All exposed wooden surfaces to be finished with two or more coat spirit polish including wood filler
3
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
For fixed portion
Powder coated aluminium (minimum thickness of powder coating 50 micron)
635
-
-
... More
50 Pair
100
-
-
... More
FACTORY FABRICATED DUCT - GI DUCT
Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular / round ducting complete withneoprene rubber gaskets, elbows, splitter dampers, vanes,
0.63mm (24 gauge) GSS
524
-
-
... More
32 mm dia nominal bore
225
-
-
... More
CEILING FANS
Supply, installation, testing and commissioning of the single phase heavy duty grease filled double ball bearing, aerodynamically designed heavy gauge aluminium blades, copper wounded, required length down rod, capacitor and impregnated silicon stamping motor etc.a 1200 mm sweep, brilliant white/As directed by Engineer-In-Charge (without regulator
24
-
-
... More
CHAPTER - XVIII DG SET Supply, installation, testing and commissioning of 125KVA SILENT Diesel Generator set radiator cooled type suitable for of 415V, 3 phase 4 wire, 0.8 pf. (lagging) 50c/s A.C supply complete with engine (1500 RPM) and with cold starting kit in alternator DG Set controller including accessories residential type silencer and fuel service tank (internal) 185 liters capacity, battery and battery charger with all associated accessories, including standard set of tools and anti-vibration mounting pads, MCCB. Regulator through inbuilt AVR, digital governing + protective function.
1
-
-
... More
25mm [6 mm thick insulation]
75
-
-
... More
25mm dia.
38
-
-
... More
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.
With material conforming to Grade-II (size range 53 mm
to 0.075 mm ) having CBR Value-25
30
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
646
-
-
... More
Neat cement punning
86
-
-
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
578
-
-
... More
Supply, installaing, testing and commissioning of mono-blocK centrifugal pump with bronze impeller, driven by suitable capacity electric motor for hot glycol complete with accessories and insulated with 50mm 24 kg/m³ density glasswool & covered with 24 gauge aluminium cladding as specified including foundation as per manufacturer instruction and suitable for a flow rate of 78.7 USGPM and 24m head. (2 working + 1 standby)
3
-
-
... More
Supply and wiring with the following size 1100V grade FRLS insulated multistranded Copper wires in and including suitable size heavy duty PVC conduit concealed in wall after necessary chase cutting with finishing / surface on wall / ceiling including all accessories such as junction boxes, bends elbows and end termination with suitable lugs. 2 Runs of 2.5 sq.mm wires with 1 Run of 1.5 sq.mm in 25 mm dia PVC conduit ( For circuit wirings)
858
-
-
... More
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of
Engineer-in-charge.
Prelaminated particle board with decorative lamination on both sides.
16
-
-
... More
Providing & fixing in position C.P. brass towel rail (600mm long) including cutting necessary C.P. brass screws complete.(Jaquar model no. ACN -1111NM /approved equivalent).
17
-
-
... More
Providing and fixing Stainless Steel floor door stoppers of approved make, confirming to grade AISI-304 in 18/8 composition with nuts and screws etc. complete.
58
-
-
... More
Supply and fixing of modular type single phase 25A 3 Pin socket with 25A switch with front plate and anodized GI box including all fixing accessories complete as required
35
-
-
... More
Supply and installation of MS chimney made out of 3mm thick MS sheet, minimum 1.2m above the highest point of the building roof and its diameter shall be as per the manufacturer's recommendation. The item shall be complete with the mounting/fixing arrangement as required.
20
-
-
... More
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion)
Along external wall where the apron is not provided using
chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall & rodding etc. complete:
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
144
-
-
... More
Providing & fixing GI inlet fitting with max 3inlet 32,40 or 50mm size fabricated from 100mmdia GI pipes and welded GI sockets fixed to upvc trap with set in cement concrete as per direction of Engieer-in-charge complete.
15
-
-
... More
Corner Table of following sizes made out of 70 X 25 mm thick teak wood moulded legs and edges to be covered with 20 X 20 mm thick teak wood moulding finished with with two or more coat spirit polish including wood filler (a) Of size 600 X 600 X 400 mm, top to have 19 mm thick commercial board with 1mm thick laminate.
17
-
-
... More
finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :
12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I
-
-
-
... More
Providing & fixing in position C.P. brass twin coat hook including cutting necessary C.P. brass screws complete.(Jaquar model no. 1191N/approved equivalent).
21
-
-
... More
Providing and fixing 100mm CP brass grating for trap.
74
-
-
... More
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.
5
-
-
... More
Constructing masonry Chamber 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement :4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 Cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside palstering with cement mortar 1:3 (1 Cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design:
With Solid Blocks
1
-
-
... More
Supply and laying of following pair 0.5mm dia PVC insulated unarmoured copper conductor Telephone wire in existing conduit conforming to DOT Specifications.
2 Pair
1120
-
-
... More
Supply of Conference chair revolving & tilting chair with hydraulic jack gas lift size 515x515x800 mm complete all as approved and directed by the Engineer-in-Charge.
51
-
-
... More
40mm dia nominal bore
70
-
-
... More
Supply and install valves and specials for hot water lines of following sizes
80mm butterfly valve
4
-
-
... More
Kitchen sink without drain board
610x510 mm bowl depth 200 mm
5
-
-
... More
Providing and fixing wash basin with CI brackets,15mm brass type(pressmatic)pillar tap,32mm CP brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever required. W.B Hindware model 10080 White vitreous china wash basin(round/oval under counter) size 580 mm x 430 mm with single 15mm CP brass pillar tap.(Bottle trap-Jaquar model no. ALD 769/approved equivalent, CP waste-Jaquar model no. ALD 709/approved equivalent,pillar tap-Jaquar model no. 031/approved equivalent).
13
-
-
... More
Supply and laying of following pair 0.5mm dia Jelly filled armoured copper conductor Telephone cable in shaft existing cable tray with all fixing accessories. The cable shall be as per the DOT specifications.
20 Pair
30
-
-
... More
25mm dia.
2
-
-
... More
Providing & fixing urinal partition of 12 mm th toughened glass ( size 675 x 330 mm) complete with brackets bolts nuts for grouting to wall complete in all respects.
2
-
-
... More
Supply installation testing and commissioning of Vertical type MCB Double door Distribution boards dust and vermin protected and AC supply operation including incoming MCCB/ MCB/ ELCB / RCBO as per specifications and required capacity Neutral bar and Earth Terminal complete as required and installed in concealed in wall after necessary chase cutting with finishing / surface on wall including all fixing materials required. All MCBs shall be "C" Curve.
6 Way VTPN MCBDB with 125A, 25kA 4 Pole MCCB as incomer and 4 Nos 63A TP MCBs, 2 Nos 40A TPN MCBs, as outgoing.
1
-
-
... More
Supply and fixing of 50mm thick compressed mineral wool insulation for D.G. exhaust pipe with 26 gauge aluminium sheet cladding etc. as required for the under mentioned dia pipe.
100 mm dia pipe-
20
-
-
... More
50 mm dia nominal bore
10
-
-
... More
Supply installation testing and commissioning of horizontal type MCB Double door Distribution boards dust and vermin protected and AC supply operation including incoming MCB/ ELCB / RCBO as per specifications and required capacity Neutral bar and Earth Terminal complete as required and installed in concealed in wall after necessary chase cutting with finishing / surface on wall including all fixing materials required. All MCBs shall be "C" Curve.
6Way TPN MCBDB with 40A, 100mA 4 Pole RCBO as incomer and 18 Nos 6-32A SPMCBs as outgoing. (PDB)
3
-
-
... More
Providing and placing in position 100mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes,of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick ,100mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage ,all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge
189
-
-
... More
Supply and placing Sr. Executive High Back Chair made of steel frame having adjustable sincrotilt mechanism and one position locking facility mounted on Hydraulic Chromium plated five prong base with 60 mm double castors. Fitted with PU arm rest seat and back having 85 mm thick rubber cushion finished with approved quality of fabric.
2
-
-
... More
Dual type Thermometers ( -10°C to 50 °C)
44
-
-
... More
70W LED FLOOD LIGHT PHILLIPS CAT NO. -BVP120 LED CWNB. or equivalent
8
-
-
... More
Constructing masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregrate 40mm nominal size ) inside plastering 12 mm thick with cement mortar 1:3 (1 Cement : 3 coarse sand) finished with floating coat of neat cement & making channels in cement concrete 1:2:4 mix (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design:
Inside size 90x80cm and 45cm deep including C.I. cover with frame (light duty) 455x610mm internal dimensions total weight of cover and frame to be not less than 38kg (weight of cover 23kg and weight of frame 15 kg).
With Solid Blocks
12
-
-
... More
Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work
6315
-
-
... More
Supply of Teapoy of size 400x400x400mm made out of teak wood frame (side rail 70x25mm & legs 38x38mm ) toop with 19mm thick commercial board and 1mm thick laminate all exposed edges to have lipping finished with melamine polish etc. all complete all as directed/approved by Engineer-in-Charge.
8
-
-
... More
Supply of Library Table of size 1800mm x 1200mm x 750mm with 25mm post formed top, with two Nos chrome plated padestal supported on MS angles and frame etc. all complete all as directed and approved by Enginner-in-Charge.
3
-
-
... More
Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers
71
-
-
... More
Single Seater
36
-
-
... More
Providing and fixing white vitreous china urinal of appx. size 610x410x380mm Hindware Model no 60002 /approved equivalent) with push type urinal flushing arrangement(Jaquar model no. 077 /approved equivalent)including fixing to wall with suitable brackets all as per manufacturers specification & direction of Engineer-in charge with standard size C.P.brass flush pipe,spreader with unions & clamps(all in CP brass)including painting of fittings, cutting and making good the walls and floors where required.
2
-
-
... More
Providing and fixing Stainless steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required. Kitchen sink with drain board
510 X 1040 mm bowl depth 250mm
1
-
-
... More
Providing & fixing chicken wire mesh at the junctions of RCC and brick work, 100mm overlapping on both sides with all necessary hardware etc., complete.
607
-
-
... More
Providing in position storage type hot water electrical geyser( vertical or horizontal-1.5 kw) including making connection in all respects.-Venus/Racold or equivalent .
25 litres capacity.
20
-
-
... More
Earthing For DG Body
Supply of Earthing termination made of copper-bonded rod of 10 feet length,14.2 mm dia. (Minimum copper bonding shall be 0.25mm) along with Rod-to-Conductor connectors, Earth enhancement material, Pit Cover and other accessories as required and as per specification and other applicable codes. Make: JMV
2
-
-
... More
Supply of Straight - Connector for making straight joint of 8 mm dia. Aluminium Conductor to 8 mm dia Aluminium conductor on parapet wall, roof and vertical facade of mesonery / glass / metalic work. Make: JMV
10
-
-
... More
50 Pair
1
-
-
... More
Supply of Standard steel Almirah (Medium) of size 1266 x 750 x430mm (20 gauge n top, bottom & doors and 22 gauge on sides, back & shelves.) with 3 Nos shelf with locking arrangemnts and key in duplicate and of approved make and color etc. all complete all as directed /approved by Engineer-in-Charge.
2
-
-
... More
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
85
-
-
... More
Providing of Spiral coil earthing with 8 SWG GI wire including spreading of salt and charcoal as per IS 3043/87 with latest amendments complete as required.
22
-
-
... More
180x150mm size P type
With Solid Blocks.
12
-
-
... More
CHAPTER -XVI CABLE , END TERMINATIONS & CABLE TRAY
Supplying and laying of following sizes 1100V grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification in trenches/pipe, cable trays, ducts, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning.
3.5 core 70 Sqmm (Aluminium) conductor armoured cables
50
-
-
... More
4 CORES AL. CONDUCTOR
4C X 25 Sqmm
40
-
-
... More
Coursed rubble masonry (second sort) with hard stone in foundation & plinth with :
Cement mortar 1:6 (1 cement : 6 coarse sand)
245
-
-
... More
Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.Providing and laying Polished Granite stone stone in risers of steps, skirting, dado and pillars with 18 mm thick stone slab, as per sample of Stone approved by Engineer-in-charge, laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand (Manufactured)) and jointed with grey cement slurry, including rubbing and polishing complete with :
28
-
-
... More
Supply of wall Conductor holder for holding of 8 mm round conductor. The min height of the PVC conductor holder should be 85 mm clear height between Wall and conductor and install at every 1 mtr. Make: JMV
87
-
-
... More
150x10 mm
44
-
-
... More
Providing seven stage water purification , the new Aquaguard PureChill RO Storage Cooler cum Purifier OR equivalent with its one of a kind purification technology (RO),with cooling and storage solution of following specification.
Approximate External Dimension (W X D X H)
640 x 450x 1350 mm
Operating Power Supply
230 ± 10 % V AC, 50 Hz b) Filter Cartridges - Sediment, Activated Carbon, Carbon Block
Running Current in Amps.(Max) 4.5 ± 10 % Power in Watts (Max)
700 ± 10 % Water Storage Tank Capacity
80 Ltr.
Capacity with Comfort Level Water Outlet Temperature at 17° C ± 1° C 60 Ltr. Compressor Make Copeland or Tecumseh Refrigerant Freon22 Stages Details
1. Particulate Filter 2. Pre Carbon Block Filter 3. Anti Scalant Filter 4. Sediment Filter 5. Reverse Osmosis membrane Filter 6. Post Carbon Block Filter 7. Nano Silver Leaching Filter
2
-
-
... More
Fully automatic DOL starter suitable for 2.2 KW motor including 40A 4P MCB 'C', Push Buttons, LED Indications, Auto/ Manual/ OFF selector switch, SPPR, FRLS copper control/ power wiring etc. Complete as required.
3
-
-
... More
Providing and fixing C.P.brass long body bib cock of approved quality conforming to IS standard and Weighing not less than 690 gms. (Jaquar model no. (Jaquar model no. CON-107KN /approved equivalent). /approved equivalent).
15 mm nominal bore.
15
-
-
... More
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
2
-
-
... More
SITE FABRICATED DUCT - GI DUCT
Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes,
0.63mm (24 gauge) GSS
30
-
-
... More
Providing and fixing bolts including nuts and washers complete.
188
-
-
... More
CHAPTER - VIII FINISHING
12 mm cement plaster of mix :
1:6 (1 cement : 6 fine sand)
2421
-
-
... More
STARTERS PANEL
Supplying, assembling, erecting, connecting, testing and commissioning of dust, damp and vermin proof wall mounting factory built sheet steel enclosed non-drawout modular type single starter cubicle fabricated out of suitable sized 1.6mm thick PCRC sheet, duly painted complete with earth studs, numbering & sign writing, interconnection & including copper conductor flexible connection with all accessories, etc. complete & as per specifications and mounted with the followings etc. complete as required. Item including 4core 1.5sq.mm FRLS flexible cable with ON/OFF LED iluminated push buttons in seperate enclosure box to be in recessed manner. (Starters should have NO/ NC contacts for remote/ fire control facility etc. complete as required.) Fully automatic DOL starter suitable for 1.10 KW motor including 20A 4P MCB 'C', Push Buttons, LED Indications, Auto/ Manual/ OFF selector switch, SPPR, FRLS copper control/ power wiring etc. Complete as required.
2
-
-
... More
CHAPTER - XX CENTRAL HEATING
Supply, installation & commissioning of Hot Water Heater capable of delivering a heat output of 100000 K.cal/hr at Tawang, using HSD providing hot water at 90 Deg C having good thermal efficiency of thermax or equivalent make including base frame, control panel, electric panel, mounting frame, suitable for operation on 50 Hz, 3 phase, 415V AC supply and all complete as specified. (2 working + 1 stand-by)
3
-
-
... More
EXHAUST FANS
Supply, Installation & testing of following 900 RPM Exhaust fan suitable for suitable for single phase 230/240V, AC Supply complete with motor MS louvers , mounting brackets, all accessories etc as complete.
230mm dia Plastic body ventilation fan.
19
-
-
... More
CHAPTER -XVII LIGHTNING PROTECTION SYSTEM
Air Termination Network:
Supply of single spike air terminals of 10 mm dia.of following lengths as required and as per site conditions. the air terminal shall be manufactured with Aluminium. The terminal shall be provided with the integrated / attached threaded base support suitable for mounting the terminals as per site condition. The base support shall be minimum 3 mm thick and shall have inbuilt connector fitting for connection of lightning conductor in such away that conductor contact area shall not be less than 40mm on all side of the conductor. The air terminals shall be supplied with the intermediate guy-wire supports to make it stable in case of high wind speed. Make: JMV
1000 mm
7
-
-
... More
Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled/hot water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with TF quality expanded polysterene molded pipe sections of density not less than 20 Kg/cu.m, after a thick coat of cold setting adhesive (CPRX compound) covered with two layer of 120gm/sqm polythene sheet(vapour barrier) and finally applying 0.63mm Al Sheet cladded with type3, grade I roofing felt strip at the joints as per specifications .
80mm dia nominal bore.
164
-
-
... More
CHAPTER - II PLAIN AND REINFORCED CEMENT CONCRETE WORK.
Providing and laying in position cement concrete of specified grade excludingthe cost of centering and shuttering - All work up to plinth level "1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone
aggregate 20 mm nominal size).
29
-
-
... More
Supplying and fixing of under noted 'B' class M.S. pipe for D.G. exhaust complete with bends, elbow, flanges etc. as required.
100 mm dia pipe-
20
-
-
... More
Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like
205
-
-
... More
25 mm dia. nominal bore
120
-
-
... More
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
6270
-
-
... More
100x10 mm
362
-
-
... More
Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete.
Powder coated minimum thickness 50 micron aluminium.
220
-
-
... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.
1.0 mm thick
184
-
-
... More
Extra for Granite stone flooring in treads of steps and risers using single length up to 2.00 metre.
30
-
-
... More
CHAPTER - XIII INTERNAL ELECTRIFICATION
Point wiring for Light / fan / Exhaust fan with 2 runs of 1100V grade 1.5 sq. mm & 1 run of 1.5 sq. mm FRLS insulated multistranded Copper wires, run in & including 25 mm dia , heavy duty PVC conduits concealed in wall after necessary chase cutting with finishing / surface on wall/ ceiling conforming to IS 732 including all accessories such as junction boxes, conduit bends, elbows and ceiling rose, anodised GI switch box with modular switch and the box covered with front plate.
One light point controlled by one 6A switch
175
-
-
... More
Earthing for DG Neutral
Supply of Earthing termination made of copper-bonded rod of 10 feet length,23.2 mm dia. (Minimum copper bonding shall be 0.25mm) along with Rod-to-Conductor connectors, Earth enhancement material, Pit Cover and other accessories as required and as per specification and other applicable codes. Make: JMV
2
-
-
... More
DUCT LINE THERMAL INSULATION
Supplying, fixing acoustic lining on wall and ceiling of AHU rooms with 50 mm thick, density 32 kg/cu.m resin bonded glass fiber insulation friction fixed in 610 mm x 610 mm frame work made of 25X50X50X50X25 mm made out of 0.6mm thick GI sheet U shaped channel and covered with reinforced fiber glass tissue and finished with 0.80 mm perforated aluminium sheet etc. complete as required and as per specifications.
360
-
-
... More
Add for using extra cement in the items of design mix over and above the specified cement content therein.
1668
-
-
... More
40 mm dia nominal bore
170
-
-
... More
Supply and installation of following size TV Splitter in MS box complete as required.
8 Way Splitter
4
-
-
... More
32 mm dia nominal bore
225
-
-
... More
CHAPTER -XV TELEPHONE / TV / LAN WIRING
Supply and laying of 25mm dia, heavy duty FRLS PVC conduit concealed in wall / ceiling / floor including all accessories such as Junction boxes, conduit bends, etc. completed as required.
180
-
-
... More
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work :
20 mm dia nominal bore
20
-
-
... More
6mm cement plaster of mix: 1:3 (1 cement : 3 fine sand)
2355
-
-
... More
GRILLS/DIFFUSERS
Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.
7
-
-
... More
Providing & fixing C.P. brass shower assembly Jaquar model no OHS-1789 consisting of wall mixer (Jaquar model no. FLR- 5273 UPR), wall flanges and shower rose (Jaquar SHA - 477) & pipe upto shower rose complete.
15
-
-
... More
Spply, erection. Testing and commissioning of HDPE Expansion tank of capacity 500 Ltrs. with all fixing accessories and insulated with 50mmk thick TF quality EPS material and covered with 26 Guage Aluminium sheet complete as per specifications.
1
-
-
... More
Providing and fixing C.P.brass bib cock of approved quality conforming to IS : 8931.
15 mm nominal bore.(Jaquar model no. CON-037KN /approved equivalent).
21
-
-
... More
42 mm [9 mm thick insulation]
135
-
-
... More
Providing 50 mm dia G.I. Spout set in cement mortar 1 : 3 (1 cement : 3 coarse sand) complete.
3
-
-
... More
Writing Chair with arm, of size 450 X 400 X 835 mm made out of teakwood frame work, 12mm thick commercial ply with 50 mm thick rubber foam in seat, duly upholstered with fabric of approved shade & quality including two or more coat spirit polish including wood filler
15
-
-
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):
25 mm dia nominal bore
25
-
-
... More
For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Powder coated aluminium (minimum thickness of powder coating 50 micron)
2718
-
-
... More
CHAPTER - III MASONRY WORK:
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :
Cement mortar 1:6 (1 cement : 6 coarse sand)
210
-
-
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.
Size of Tile 600x600 mm
66
-
-
... More
Supplying and making end termination with brass double compression gland and aluminium for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
3.5 core 70 Sqmm
2
-
-
... More
The LT Panel shall have atleast two spare cubicles to suit the highest rating outgoing MCCB. The size of all Panel Mounting Meters shall be 96X96mm. The Panels shall be mounted on U channels including supply and fixing of the same. Every ACB shall be provided with ON/OFF /Trip Indication lamps of LED type and shunt trip coils, wherever Electrical Interlocking is specified. For all Electrically operated Breakers, Local Remote Selector switches shall be provided for controlling the Breakers remotely. All ACBs/MCCBs 160A and above shall be with Micro processor releases. All CTs/CBCT shall be resin cast type. All MCCBs below 160A shall be with Adjustable Thermal Magnetic based releases. All MCCBs shall be Icu=Ics=100%. All MCCBs shall be provided with spreader links and Rotary handles.
Main LT Panel at Ground Floor
Incoming :320 A Microprocessor Base MCCB 35KA 4Pole Busbars : 400A TPN Aluminium Busbar-1set
Outgoings :
2 Nos. 100A 4P MCCB(35-KA)
1 Nos. 125A 4P MCCB(35-KA)
1 nos 40A 4P MCCB 35 KA
1 Nos. 100A 4P MCCB(35-KA)-Spare Only
1 Nos. 125A 4P MCCB(35-KA)-Spare Only
1 nos 40A 4P MCCB 35 KA
Metering For Incomers :
0-500V Digital Voltmeter with selector switch and MCBs 01- nos
320A Digital Ammeter with CTs of ratio 320-160/5A, Class 1 Accuracy and 5VA burden and selector switch- 1 nos
LED Phase indication lamps with individuals MCBs and control with toggle switches- 1sets
CT Operated Digital Load managers with RS 485 Connectivity
-
-
-
... More
Supply and fixing of Telephone outlet (RJ11) with anodised GI box with front plate etc. complete as required.
32
-
-
... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
92
-
-
... More
50 mm dia nominal bore
15
-
-
... More
52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
15
-
-
... More
75 mm diameter
85
-
-
... More
50mm dia.
1
-
-
... More
305 mm dia 900 rpm metal body exhaust fan (Heavy Duty).
2
-
-
... More
Extra for providing richer mixes at all floor levels :
Note:- Excess/less cement over the specified cement content used is payable /recoverable separately.
Providing M-30 grade concrete instead of M-25 grade BMC/
RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum)
743
-
-
... More
Providing and fixing of rubber nylon door buffer (dia of 40mm and 50mm long) on wall with rowl plug and screw.
58
-
-
... More
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
4917
-
-
... More
Supply of 10mm dia Copper Bonded Steel Round Conductor laid at 600mm below the ground, as Required and as per specification and code of practice. Make: JMV
261
-
-
... More
Fully automatic DOL starter suitable for 3.70 KW motor including 40A 4P MCB 'C', Push Buttons, LED Indications, Auto/ Manual/ OFF selector switch, SPPR, FRLS copper control/ power wiring etc. Complete as required.
4
-
-
... More
CHAPTER - VI FLOORING
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
Granite of any colour and shade
Area of slab over 0.50sqm
37
-
-
... More
Supply and laying of RG 6 Cable in existing conduit complete as required.
540
-
-
... More
BOOK SHELVES (BS)
Overall Dimensions of Single Sided Wood & Steel Book Rack Base Unit shall be 925mm(W)x300mm(D)x1890mm(H). Rigid Knockdown construction . Back panel up to the bottom of third rack for additional rigidity . Racks, Back panel & Skirting : CRCA 0.8 mm thickness . Side panels : 25 mm thick pre laminated particle board (PLB) with laminate on both sides . Stackability shall have add-on units width wiseto form a bank of racks having common side panel . Bottom plus four fixed racks plus five storage levels . Each rack is provided with stiffener at bottom for strength . Uniformly distributed load capacity per each full shelf is 80 Kg maximum . Rack back stiffener shall be there at the rear side of the racks back stiffener s are provided . These are to support books on the rear side . Label Holder on each main unit to insert labels for identification . Finish shall be Epoxy polyester powder coated to the thickness of 50 microns .Make: SIngle Sided Wood & Steel Book Shelves of Godrej or equivalent model of Steel Case , Vitra, Herman Miller .specification
6
-
-
... More
Providing and fixing brass stop cock of approved quality complete.
20 mm nominal bore
10
-
-
... More
10W LED RECESSES Downlighter MAKE-PHILLIPS CAT NO. ASTRA prime LED PANEL(COOL DAY LIGHT , ROUND) or equivalent
18
-
-
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.
External work
50 mm dia nominal bore
100
-
-
... More
Non Return Valve 65mm dia.
3
-
-
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
With Solid Blocks
2
-
-
... More
Providing and fixing M.S. stays and clamps for uPVC /sand cast iron/centrifugally cast (spun) iron pipes of diameter:
100 mm
85
-
-
... More
12W LED SURFACE MOUNTED MAKE-PHILLIPS CAT NO. SM250C LED12S PSU 6500 OD WH 1200 lumen output or equivalent
196
-
-
... More
CHAPTER - I EARTH WORK
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge
All kinds of soil
1973
-
-
... More
Supplying and laying of bare GI tape off the following earthing clamped to wall with suitable clamps saddles and fixing bolts/soldering /riveting in ground including the cost of digging and back filling as required and complete as required to comply with IS 3043:1987. All joints shall be tined.
25 x 6 mm GI strip
90
-
-
... More
Providing and fixing G.I.pipes complete with G.I. fittings and clamps i/c making good the walls etc. concealed pipe including painting with anti corrosive bitumastic paint, cutting chase and making good the wall.
15 mm dia. nominal bore
145
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both
faces of shutters:
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
92
-
-
... More
32 mm dia nominal bore
6
-
-
... More
4C X 4 sqmm
12
-
-
... More
50 mm dia nominal bore
1
-
-
... More
CHAPTER -XIV POWER WIRING
Supply and fixing of modular type single phase 16A 6 Pin shuttered type socket with 16A switch with front plate and anodized GI box including all fixing accessories complete as required.
33
-
-
... More
Laying and Jointing PVC Pipe. Heading
-
-
-
... More
Supply of Side Rack of size 1050x525x750 mm made out of 19 mm thick commercial block board covered with 3.5 mm teak veneer. With 3 Nos. of drawers with locking arrangement and one key board tray on channels, with teak wood lipping on edges including finishing with melamine polish etc. all complete.
8
-
-
... More
Supplying and fixng of 72 LED Street lightluminaire, an IP66 LED Safe optic compartment, a separate IP 66 control gear compartment with an impact resistance of IK08, an extruded aluminium painted housing, a toughened glass protector permanently sealed with a robotically closed at one end by an end cover and the other end by a framedispensed silicone sealant and door assembly (to access control gear) both made of injection moulded polycarbonate, a removable control gear plate, safety plug and socket system, a high pressure die cast aluminium painted and socket system, a high pressure die cast aluminium painted mounting spigot suitable for horizontal mounting as per Philisp cat -BRP 410LED CW 072MR FG S1PSU GR
22
-
-
... More
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
12
-
-
... More
Centering and shuttering including strutting, propping etc. and removalof form for all heights :
Foundations, footings, bases of columns, etc. for mass concrete
670
-
-
... More
Providing & fixing uPVC floor traps with extention piece of required lenth with solvent cement joint with stainless steel grating cover and frame of 150x150 mm size.
100 mm inlet and 100 mm outlet
21
-
-
... More
100 mm inlet and 75 mm outlet
6
-
-
... More
Supply and install diesel storage tank 500 ltr capacity made out of 4mm thick MS sheet. duly insulated with 25mm thick thermocol of density 16/ Cubic mtr and insulated with 26 gauge aluminium sheet
1
-
-
... More
INLINE FAN
Supply, installation, testing and commissioning of circular type Inline fan of the following capacity of approved make and specification. (Cost to be inclusive of Speed Regulator)
150 CFM, 10mm SP WG with Single phase motor for toilet exh.
9
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements