Central Railway Tender
Calculate bid estimation of CR Tender
Costs
EMD
₹ 10,11,700Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
1.provision Of Axle Counter In Parallel To Existing Vulnerable Dc Track Circuits At Various Stations On Bhusawal Division. 2.provision Of Digital Axle Counter In Dual With Existing Conventional Track Circuit At 08 'c' Class Stations On Bhusawal Division
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
BSL-N-SNT-05-2024-25-BHUSAWAL DIVISION-S AND T/CENTRAL RLYTender No
BSL-N-SNT-05-2024-25Tender Authority
Central Railway ViewPurchaser Address
-Website
http://ireps.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supply of PVC Indoor Cable 1x60x0.6mm dia colour coding of insulation of inner core shall be in six colour Viz Blue , Red , Grey ,Green, Brown and Black conforming to IRS 76/89(Amdt 3) or latest. (Inspection By Consignee)
1.5
300675
413805.08
... More
Supply of PVC Indoor Cable 1x 40x0.6mm dia. Colour coding of insulation of inner core shall be in eight colour viz Blue,Red,Grey,Green,Brown,Black, Yellow & white.conforming to IRS 76/89 (Amdt 3) or latest. (Inspection By Consignee) 21A 2.00 Kilometre 292637.78 585275.56 (-) 8.25 536990.33 6
1.5
197250
271465.86
... More
Supply of Indoor Jumper Wire of various colour as per Railways standard practice of type ATC 1 x 0.6 mm dia.conforming to IRS 76/89 (Amdt 3) or latest. (Inspection By Consignee)
12
8647
95211.29
... More
Supply of Indoor Jumper Wire ATC 1 x 1 mm dia. conforming to IRS 76/89 (Amdt 3) or latest. (Inspection By Consignee)
2
13093
24026.65
... More
Supply of PVC Flexible Copper Cable, Single core, multi strand 1x2.5 sq mm(50 conductor each dia 9 0.25 + /- 0.01) as per specn IRS 694/2010 with latest amendment. If any with insulation thickness of 0.70 mm nominal conductor resistance 7.98 ohms /km and test parameters are as per (S)76/89 (Amdt .3). (Inspection By Consignee)
3
44575
122694.48
... More
Supply of PVC Flexible Copper Cable, Single core, multi strand 1x10 sq mm(80 conductor each dia 10 0.40 + /- 0.01) as per specn IS 694/2010 with latest amendment. If any with insulation thickness of 1.00 mm nominal conductor resistance 1.91 ohms /km and test parameters are as per IRS (S)76/89 (Amdt .3). (Inspection By Consignee)
4
141059
517687.63
... More
Supply of PVC Flexible Copper Cable, Single core, multi strand 1x16 sq mm(126 conductor each 11 dia 0.40 + /- 0.01) as per specn IS 2465/1984 & IS:694/2010 with latest amendment. If any with insulation thickness of 1.00 mm nominal conductor resistance 1.121 ohms /km and test parameters are as perIRS (S)76/89 (Amdt .3). (Inspection By Consignee)
2.5
209928
481523.04
... More
Supply of PVC Flexible Copper Cable, Single core, multi strand 1x25 sq mm(196 conductor each 12 dia 0.40 + /- 0.01) as per specn IS 2465/1984 & IS:694/2010 with latest amendment. If any with insulation thickness of 1.2 mm nominal conductor resistance 0.780 ohms /km and test parameters are as per IRS (S)76/89 (Amdt .3). (Inspection By Consignee)
3
326216
897910.83
... More
Supply of wire 16/0.2 (blue,red,gray,yellow, brown,black, white as per site engineer instruction) finolex/polycab/ delton make.IRS:S-76/89(Amd.3),BS:4808 Part-2.Wire to be procured from RDSO approved vendor (Inspection By Consignee)
4
6445
23653.77
... More
Sealed maintenance free VRLA Battery/Cell 2 volt,300AH IRS:S-93/96(A)(Amd.1) or latest i nset of (55+5) with fittings and accessories.(Inspection By RDSO)
180
5040
832356
... More
Supply of Transformers 230V/110V-130V Single Phase 2 KVA as per spec IRS S-72/88 (Amd.2)with latest amendments. (Inspection By Consignee)
10
10876
99794.09
... More
Supply of Battery Charger self regulating floor mounting type with 230 V AC Single phase input and output 60V DC,40A as per spec.IRS.S.86/2000(Amd.4)with latest amendment. (Inspection By RITES)
10
130799
1200086.97
... More
Supply of Battery Charger self regulating floor mounting type with 230 V AC single phase input and output 110V DC,40A to spec.IRS.S.86/2000(Amd.4)with latest amendments. (Inspection By RITES)
10
93822
860818.59
... More
Supply of Battery Charger self regulating floor mounting type with 230 V AC single phase input and output 24V DC,30A as per spec.IRS.S.86/2000(Amd.4)with latest amendments. (Inspection By Consignee)
10
32092
294450.34
... More
Supply of Automatic Changeover for individual supply Automatic changeover unit of 19 signal/Track/DC circuit supply of 32A, AC/DC consisting of 3TC 44 contactors, LED Lamp,Push button, terminals,VSR,polarity switches. As per Rly.drg-SK-841/1-5 for IPS supply to mannual discrete equipments with P/switch. (Inspection By RITES)
30
29381
808727.99
... More
Relay base plate complete with amophanols,code pins fixing screw etc.suitable for Metal to Metal K-50 mini groups/ECRs of Siemens Make of functional equivalent of other makes. Note: Relay Base plates,are to 20 be procured fom Relay manufacturer (OEM) Manufactures Certificate for procurement and guarantee in this regard should be furnished.The payment to be released only after Manufacturers Certificate is submitted. (Inspection By Consignee)
57
729
38169.33
... More
Supply of Plug In type Relay Metal to Metal type neutral relay mini groups (Non AC Immunised) 21 Siemens make (No. RSSK 30/0011) (Ref. IRS:S46/74 with Amd. 1 & firms specification.).or functional equivalent without base plates.Contact configuration 5F/3B or 6F/2B or 4F/4B to be specified by Engineer incharge. (Inspection By RDSO)
75
7143
491529.06
... More
Supply of QNA1 -K AC immunized relay 12F-4B,24VDC along with plug board, retaining clip and connectors conforming to BRS:931A, & RDSO letter no STs/E/Relays/UEA/PI dated 30.05.97 Annexure-II IRS:S60,IRS:S34 & IRS:S23 . (Inspection By RDSO)
14
4007
51471.46
... More
Supply of QNA1 AC immunized relay 8F-8B,24VDC along with plug board, retaining clip and connectors conforming to BRS:931A,IRS:S60,IRS:S34 & IRS:S23 . (Inspection By RDSO)
14
3852
49483.44
... More
Supply of QN1 Non AC immunized natural relay 8F-8B,24VDC along with plug board, retaining clip and connectors conforming to BRS:930, IRS:S60,IRS:S34 & IRS:S23 . (Inspection By RDSO)
15
4030
55469.21
... More
Supply of QN1 Non AC immunized natural relay 12F-4B,24VDC along with plug board, retaining clip and connectors conforming to BRS:930, IRS:S60,IRS:S34 & IRS:S23 . (Inspection By RDSO)
15
4104
56493.14
... More
Supply of QNN1 Twin natural relay 24VDC 4F-4B/5F-3B/6F-2B contacts,complete with plug board, retaining clip and connectors BRS:960 (Inspection By RDSO)
15
6483
89222.7
... More
Supply of INDICATIVE TYPE OF FUSE INSERTS. IRS S:-78-92 A) With holder 1.6 A (System, Rapid or Mainad Make). (Inspection By Consignee)
400
79
29330.64
... More
Supply of INDICATIVE TYPE OF FUSE INSERTS. IRS S:-78-92 B) With holder 0.6 A (System, Rapid or Malnad Make) (Inspection By Consignee)
50
77
3541.09
... More
Supply of INDICATIVE TYPE OF FUSE INSERTS. IRS S:-78-92 C) Without holder 1.6 A (System, Rapid or Malnad Make). (Inspection By Consignee)
1000
23
21120.85
... More
Supply of INDICATIVE TYPE OF FUSE INSERTS. IRS S:-78-92 D) Without holder 0.6 A (System, Rapid or Malnad Make) (Inspection By Consignee)
50
23
1056.04
... More
Resin cored wire as per specification No. IS:1921-1975 with Alloying element percentage as 63% 31 SN (Tin) and / 37% Pb (Lead) with percentage of various impurities not exceeding the values Sb (Antimony) 0.2% maximum , Cu (Copper) 0.1% maximum, As (Arsenic) 0.05% maximum, Fe (Iron) 0.02% maximum & other impurities mainly Al, Zn & Cd shall be limited. The flux shall be free from corrosive action as per clause 5.2 & flux percentage may be used as per requirement. (Inspection By Consignee) 128A 33.00 Numbers 66.15 2182.95 (-) 8.25 2002.86
5
1252
5746.21
... More
Lacing thread rolls, black, wax coated (100 mtrs) (Inspection By Consignee)
33
66
2002.86
... More
Design,fabrication and supply of fuse Auto changeover system for 32 Nos of external non 33 detorating Type fuses of G type fuses from 0.6 A Amp to 4A Amp capacities used in signalling circuits.System shall have 8 cards with monitoring arrangement of 4 fuses in onee card.As per RDSO spec.RDSO/SPN/209/2012 Ver.2.0 or latest amendment if any. (NUMBER= NUMBER OF MODULES) (Inspection By RDSO)
22
26760
540155.24
... More
Supply of Phenolic 10mm thick sheet, grade P3 in standard size of 1.22X1.22 Mtr as per spec. No IS 2036 of 1995. (Inspection By Consignee)
35
5250
168606.04
... More
Supply of ARA Terminal blocks with links made of PBT Specn No.IRS/75/2006(Rev - 2) with latest amendments and RDSO Drg.No.SA-23741 Alt.4., SA-23745 Alt 5, SA-23746, SA-23748 Alt -4 & SA-23756 Alt-3. (Inspection By RDSO)
7500
72
499647.56
... More
"Supply of cartridge fuse block made of PBT as per RDSO Drg No SA-23748 Alt 4,SA-23749 & Spec No IRS S 75/2006 with latest Amendment. Fuse block shall be suitable for round head type voltage fuses." (Inspection By RDSO)
360
162
53819.08
... More
Supply of round head type non detoriating type low voltage cartridge fuse as per Specn No IRS/S/78/92 with latest amendments2A/4A/6A capacity (Inspection By Consignee) 161A 30.00 Numbers 33.41 1002.30 (-) 8.25 919.61
720
70
46327.88
... More
Supply of Lamp 110V/24W,2 Pin for Loc. (Inspection By Consignee)
31
22
646.5
... More
Supply of Apparatus Case with godown locks with deatachable handle on both the doors. A) Single Case as per Drg No SK 783-1/2. with latest alteration. (Inspection By RITES) 165A 50.00 Numbers 1078.08 53904.00 (-) 8.25 49456.92
50
16020
734919.79
... More
Supply of earth electrode assembly as per Drg.No.CR/S&T/SK/815 (Inspection By Consignee)
50
1078
49456.92
... More
SUPPLY OF Maintenance Free Earth As per RDSO/SPN/197/2008 or latest consisting of :1) Copper bond steel electrod 3 Mtr long 17 mm dia with copper bonding thickness of min.250 micron & UL listed & 43 marked -01 No 2) Earth enhancement compound RDSO Approved in sealed bag of 10Kgs-03 No 3) Copper strip 150x25x6 mm -02 No 4) Copper strip 300x25x6 mm -01 mm 5)35 Sqmm Copper Cable to connect earth electrod to MEEB-15 Mtr Approx. If required , additional earth enhancement compound shall be provided free of cost to ensure earth value below 01 ohm.(Inspection By RDSO)
133
17786
2170421.38
... More
Supply of Electronic timers for DAC reset arrangement 3 sec to 30 sec with 2 NO/2NC contact working voltage 24V/60V DC siemens/ABB/L&T or SELEC(642xA programmable electronic timer switch)make (Inspection By RITES)
60
2819
155201.36
... More
Supply of Multi strand twin twisted core shielded cable of 28-30/0.2 mm for Axle counter as per IRS spec. 76/89 with latest amendments, if any. (METRE= PER 100 METERS) (Inspection By Consignee)
5
14963
68644.05
... More
Supply of GI pipe, inner dia. 100mm dia. B-class as per spec. No.IS 1239 PT.1/2004 or latest with sockets and fittings. TATA/JINDAL/ZENITH BIRLA Make.(Inspection By RITES)
1200
1029
1133281.32
... More
Supply of DWC HDPE Pipe with one snap fit coupler and 'O' ring fire resistant, anti rodent,in 6mtr length of size 120 mm outer dia as per RDSO /SPN /204/2011/Ver 1.1 with Amdt 1 or latest. (Inspection By RITES)
1500
321
442368.04
... More
"Supply of RCC pipe half round of size 150mm dia outer and 100 mm dia internal 1 mtr long matching to IS No.458/2003 amendment-1 with Rev.4." (Inspection By Consignee)
15000
206
2837001.75
... More
Supply of Modular Terminal block of 2.5 sq mm 2 IN 2 out type disconnect type terminal along with 49 as per RDSO Specn. No. RDSO/SPN/189/2004 Rev 3.0. The current capacity of 16 Amps & more, The terminal should have marking at centre to view description from front. The terminals should have latest push -X technology for easy wiring. Material to be procured from RDSO approved firm only preferably of phoenix make.(Inspection By Consignee) 220A 27.00 Numbers 216.73 5851.71 (-) 8.25 5368.94
4000
117
429830.4
... More
Supply of marker card as per customer spec(10x10) (Inspection By Consignee)
20
83
1537.91
... More
Supply of Relay Rack Assembly complete with scaffolding, fixtures and accessories including MS 1 Bars for fixing of relay plug board, string rods, fuse strips with bracket, 11 Way Bus Bars with cover and mounting brackets, runway for cable/wires, frame, base assembly etc. Siemens type & as per extant practice on C. Rly. Typical part list as per Annexure-II and Rack arrangement as per Sketch no SK-727 and Rack plan as approved by Engineer incharge. (Inspection By Consignee)
16
35301
518219.27
... More
Supply of Tag Blocks 200 / 160/120 way with polycarbonate cover as per IRS S 77-2006 (Rev 1 ) RDSO DRG. NO SA 24751, SA 24752 & SA 24753 Requirement of each type shall be specified by Engineer incharge . (Inspection By Consignee)
96
1414
124622.63
... More
Supply of Main Cable Termination rack complete with scaffolding, fixtures & accessories including 3 square bars for mounting 8-way terminal blocks, ladder, string rods, frame, base assembly, insulators, J bolt, nut/bolts & fasteners, backelite sheet, etc. Siemens type and as per extant practice on Central Railway. Typical part list as per Annexure-III and rack arrangement shall be as per sketch No. SK-727 with latest alterations. (Inspection By Consignee)
8
30404
223165.36
... More
Supply of PVC Indoor Cable 1x60x0.6mm dia colour coding of insulation of inner core shall be in six colour Viz Blue , Red , Grey ,Green, Brown and Black conforming to IRS 76/89(Amdt 3) or latest. (Inspection By Consignee)
2.4
300675
662088.13
... More
Supply of PVC Indoor Cable 1x 40x0.6mm dia. Colour coding of insulation of inner core shall be in eight colour viz Blue,Red,Grey,Green,Brown,Black, Yellow & white.conforming to IRS 76/89 (Amdt 3) or latest. (Inspection By Consignee)
2.4
197250
434345.38
... More
Supply of PVC indoor cable 1 x 24 x 1 mm dia. Colour coding of insulation of inner Conductor shall be in eight colour viz Blue,Red,Grey,Green,Brown,Black, Yellow & white.conforming to IRS 76/89 (Amdt 3) or latest. (Inspection By Consignee)
4
292637
1073980.65
... More
Supply of Indoor Jumper Wire of various colour as per Railways standard practice of type ATC 1 x 0.6 mm dia.conforming to IRS 76/89 (Amdt 3) or latest. (Inspection By Consignee)
24
8647
190422.57
... More
Supply of Indoor Jumper Wire ATC 1 x 1 mm dia. conforming to IRS 76/89 (Amdt 3) or latest. (Inspection By Consignee)
1.6
13093
19221.31
... More
Supply of PVC Flexible Copper Cable, Single core, multi strand 1x2.5 sq mm(50 conductor each 9 dia 0.25 + /- 0.01) as per specn IRS 694/2010 with latest amendment. If any with insulation thickness of 0.70 mm nominal conductor resistance 7.98 ohms /km and test parameters are as per (S)76/89 (Amdt .3). (Inspection By Consignee)
4.8
44575
196311.16
... More
Supply of PVC Flexible Copper Cable, Single core, multi strand 1x10 sq mm(80 conductor each dia 10 0.40 + /- 0.01) as per specn IS 694/2010 with latest amendment. If any with insulation thickness of 1.00 mm nominal conductor resistance 1.91 ohms /km and test parameters are as per IRS (S)76/89 (Amdt .3). (Inspection By Consignee) 29A 16.00 Kilometre 6445.17 103122.72 (-) 8.25 94615.10 11 Descript ion:- Supply of wire 16/0.2(blue,red,gray,yellow,brown,black,white as per site engineer instruction)finolex/polycab/delton make.IRS:S-76/89(Amd.3),BS:4808 Part-2.Wire to be procured from RDSO approved vendor (Inspection By Consignee)
4
141059
517687.63
... More
Supply of QNA1 AC immunized relay 8F-8B,24VDC along with plug board, retaining clip and connectors conforming to BRS:931A,IRS:S60,IRS:S34 & IRS:S23 . (Inspection By RDSO)
120
3852
424143.73
... More
Fail safe Electronic Time delay unit(Plug In type ) to operate 24 VDC with only one fixed time setting of 30 / 60 / 120 seconds as per RDSO Spcn.No.IRS-S-61/2000 with amendment No.3 or Latest. (Inspection By RDSO)
16
3971
58303.09
... More
Supply of INDICATIVE TYPE OF FUSE INSERTS. IRS S:-78-92 A) With holder 1.6 A (System, Rapid or Mainad Make). (Inspection By Consignee)
800
79
58661.28
... More
Supply of INDICATIVE TYPE OF FUSE INSERTS. IRS S:-78-92 B) With holder 0.6 A (System, Rapid or Malnad Make) (Inspection By Consignee)
256
77
18130.39
... More
Supply of INDICATIVE TYPE OF FUSE INSERTS. IRS S:-78-92 C) Without holder 1.6 A (System, Rapid or Malnad Make). (Inspection By Consignee)
2400
23
50690.04
... More
Supply of INDICATIVE TYPE OF FUSE INSERTS. IRS S:-78-92 D) Without holder 0.6 A (System, Rapid or Malnad Make) (Inspection By Consignee)
800
23
16896.68
... More
Resin cored wire as per specification No. IS:1921-1975 with Alloying element percentage as 63% 18 SN (Tin) and / 37% Pb (Lead) with percentage of various impurities not exceeding the values Sb (Antimony) 0.2% maximum , Cu (Copper) 0.1% maximum, As (Arsenic) 0.05% maximum, Fe (Iron) 0.02% maximum & other impurities mainly Al, Zn & Cd shall be limited. The flux shall be free from corrosive action as per clause 5.2 & flux percentage may be used as per requirement. (Inspection By Consignee) 128A 80.00 Numbers 66.15 5292.00 (-) 8.25 4855.41
4
1252
4596.97
... More
Lacing thread rolls, black, wax coated (100 mtrs) (Inspection By Consignee)
80
66
4855.41
... More
Design,fabrication and supply of fuse Auto changeover system for 32 Nos of external non 20 detorating Type fuses of G type fuses from 0.6 A Amp to 4A Amp capacities used in signalling circuits.System shall have 8 cards with monitoring arrangement of 4 fuses in onee card.As per RDSO spec.RDSO/SPN/209/2012 Ver.2.0 or latest amendment if any. (NUMBERS= NO OF MODULES) (Inspection By RDSO)
16
26760
392840.18
... More
Supply of Phenolic 10mm thick sheet, grade P3 in standard size of 1.22X1.22 Mtr as per spec. No IS 2036 of 1995. (Inspection By Consignee)
80
5250
385385.23
... More
Supply of ARA Terminal blocks with links made of PBT Specn No.IRS/75/2006(Rev - 2) with latest amendments and RDSO Drg.No.SA-23741 Alt.4., SA-23745 Alt 5, SA-23746, SA-23748 Alt -4 & SA-23756 Alt-3. (Inspection By RDSO)
8872
72
591049.76
... More
"Supply of cartridge fuse block made of PBT as per RDSO Drg No SA-23748 Alt 4,SA-23749 & Spec No IRS S 75/2006 with latest amendment. Fuse block shall be suitable for round head type voltage fuses." (Inspection By RDSO)
200
162
29899.49
... More
Supply of round head type non detoriating type low voltage cartridge fuse as per Specn No IRS/S/78/92 with latest amendments2A/4A/6A capacity (Inspection By Consignee) 161A 64.00 Numbers 33.41 2138.24 (-) 8.25 1961.84
200
70
12868.85
... More
Supply of Lamp 110V/24W,2 Pin for Loc. (Inspection By Consignee)
128
22
2669.41
... More
Supply of Apparatus Case with godown locks with deatachable handle on both the doors. A) Single Case as per Drg No SK 783-1/2. with latest alteration. (Inspection By RITES)
32
16020
470348.67
... More
Supply of Apparatus Case with godown locks with deatachable handle on both the doors. B) Half Case as per Drg No SK 783-1/2. with latest alteration. (Inspection By RITES) 165A 64.00 Numbers 1078.08 68997.12 (-) 8.25 63304.86
16
12853
188695.84
... More
Supply of earth electrode assembly as per Drg.No.CR/S&T/SK/815 (Inspection By Consignee)
64
1078
63304.86
... More
Supply of Modular Terminal block of 2.5 sq mm 2 IN 2 out type disconnect type terminal along with 31 a s per RDSO Specn.No.RDSO/SPN/189/2004 Rev 3.0. The current capacity of 16 Amps & more,The terminal should have marking at centre to view description from front. The terminals should have latest push -X technology for easy wiring. Material to be procured from RDSO approved firm only preferably of phoenix make.(Inspection By RDSO) 201A 48.00 Numbers 2819.28 135325.44 (-) 8.25 124161.09 32
48
17786
783309.97
... More
Supply of Multi strand twin twisted core shielded cable of 28-30/0.2 mm for Axle counter as per IRS spec. 76/89 with latest amendments, if any. (METER= PER 100 METERS) (Inspection By Consignee)
8
14963
109830.48
... More
Supply of GI pipe, inner dia. 100mm dia. B-class as per spec. No.IS 1239 PT.1/2004 or latest with sockets and fittings. TATA/JINDAL/ZENITH BIRLA Make. (Inspection By RITES)
192
1029
181325.01
... More
Supply of DWC HDPE Pipe with one snap fit coupler and 'O' ring fire resistant, anti rodent,in 6mtr length of size 120 mm outer dia as per RDSO /SPN /204/2011/Ver 1.1 with Amdt 1 or latest. (Inspection By RITES)
192
321
56623.11
... More
"Supply of RCC pipe half round of size 150mm dia outer and 100 mm dia internal 1 mtr long matching to IS No.458/2003 amendment-1 with Rev.4." (Inspection By Consignee)
4800
206
907840.56
... More
Supply of Modular Terminal block of 2.5 sqmm 2IN 2 out type disconnect type terminal along with 37 as per RDSO Specn.No.RDSO/SPN/189/2004 rev.3 The current capacity of 16 Amps & more,The terminal should have marking at centre to view description from front.Material to be procured from RDSO approved firm only. (Inspection By Consignee) 220A 48.00 Numbers 216.73 10403.04 (-) 8.25 9544.79
2400
117
257898.24
... More
Supply of marker card as per customer spec(10x10) (Inspection By Consignee)
32
83
2460.66
... More
Operating tool (operating tool, screw driver & stripper) as per Annexure-VII, (Inspection By Consignee)
16
8660
127131.74
... More
Supply of thermo shrink Jointing kit (Reinforced) TSF-2 type generally conforming to RDSO 43 Specification No.RDSO/SPN/TC/57/2015 Rev 1 with modified kit contents as per CSTE Specification No.CR/SPN/TC/57 (A)/2015 dtd 06.01.2015(Table -A) to be suitable for jointing both 10/20/50 pair PIJF and 4/6 Quad cables alongwith sub-kit(Table-B) for armour continuity. (Inspection By Consignee)
64
2991
175688.48
... More
Installation of relay rack assembly including IDF pillars if any complete with wall support, scaffolding, ladders, runway for cables,Relay/Relay group base plates, fixing of Tag block etc.The work shall be done as per approved plan, extant practice on C. Railway & instruction of Rly. Engineer at site.
6
1534
8448.69
... More
Installation of Cable Termination Racks Assembly complete including wall supports, scaffolding, Disconnecting links/ARA terminal, 96 way tag block cover & other necessary accessories etc. The work shall be done as per approved plan, extant practice on C. Railways & the instruction of Rly engineer at site.
5
1306
5994.17
... More
"Fixing of Q series relay base plate/metal to metal relay mini group and major group base plate, laying, bunching, lacing, dressing & packeting of 60/40 core PVC indoor cable/flexible wire and termination of 3 60/40 core cable/flexible wire on tagblock/base plate & base plates & soldering. This includes fuse wiring, bus bar looping etc. required for keeping installation ready for circuit wiring work & panel throughing work. The work shall be done as per approved plan, extant practice on C.Rly. & the instruction of Rly. Engineer at site." (TAG BLOCK= NUMBERS)
30
626
17233.13
... More
Circuit wiring/jumpering as per circuit diagrams in the relay racks/IDF rack tagblocks. This 4 includespreparation of Jumper sheets by wire man duly checked by firm's site supervisor & wire to wire testing as per circuit diagram. Any wrong jumper done by wireman will not be paid & correction shall be done free of cost.Jumper wires will be issued by Railways. Good quality solder rosin core to be supplied by contractor for soldering of Jumper wires. Soldering of jumper wires (JUMPER=NUMBERS)
10000
12
111659.75
... More
Wiring,Fixing & commissionig of modular of fuse 0.6 to 4 Amp rating alarm system having change over arrangement and potential free contact witing at Datalogger IDF Etc as per instruction of Railway Engineer (Module of 32 nos fuses) (NUMBERS= NO. OF MODULES)
11
646
6528.54
... More
Lettering & Numbering of detail and description writing of particulars of terminations & equipments 6 on relay rack, relays, cable termination rack, battery & power equipments, IPS, operating panel, axle counter etc constituting entire system with contractor's own paint and writing material ("Asian/Dulux" make enamel paints to be used). The work shall be done as per extant practice on C.Rly & instruction of Rly engineer at site.
8
368
2704.57
... More
Fabrication and fixing of phenolic laminated/Fibre glass sheet in location box by providing all 7 fixtures as per Railway Drawing including fixing of PVC coated/with PVC pipe covered string rods at the back side for cable support with contractor's own materials. The work shall be done as per drg and arrangement similar to SK 783-1/2. with latest alterations & as per instructions of Rly engineer at site. A) SINGLE CASE Per 44B 7500.00 14.05 105375.00 (-) 8.25 96681.56
50
2251
103298.11
... More
Excavation and Casting of Apparatus Case foundation with contractors Anchor bolts, cement, ballast and other materials.The required Scaffolding Ferma etc for Casting of foundation will have to be brought by the contractor ar his own cost A) Single Case as per Drg No SK 803
50
9887
453567.04
... More
Erection of Apparatus Cases. This includes filling of location foundations and plastering A) Single Case
50
1098
50372.58
... More
Installation of Eqpt. (Relays, resistance, chargers batteries etc.as applicable) & wiring of the same in apparatus Cases as per location diagrams & circuit diagrams, as per Instruction of site incharge and practice. A) Single Case
50
1497
68707.9
... More
Installation of earth electrode assenbly as per Drg.No.RE/S&T/SIG/Tender/SK726/85 including earth wire connected through GI wire 8 SWG supported on M.S. flat of size 6mm x 40 mm to earth electrode as 12 per drg. No.CR/S&T/SK-815 for sigg. Equipment such as lever frames, apparatus case, signals, relay racks,block insruments, and etc. as per RE manual. The earth value should be less than 10 Ohms including the lead wire. The value should be measured in presence of Rly. supervisor. It should be documented and painted on earth enclosure made of concrete.( only earth electrode will be supplied by Railway). All other material required for provision of earthing will be brought by the contractor.
50
2528
115978.42
... More
Installation of unit earth as per RDSO/SPN/197/ver I or latest, to construct earthing of
133
5290
645566.96
... More
Installation, wiring & Testing/commissioning of Axle counters Reset Box of all types in Cabin/Panel 14 Room and wiring the same to integrate with the axle counter as per the instruction of Railway engineer at site. This includes laying & termination of cable, if any from Panel Room/Axle couter room/Relay room to Reset Box in DWC pipe/existing ladder. Per Detection 75B 133.00 956.92 127270.36 (-) 8.25 116770.56 Point (DP)
11
7665
77362.75
... More
Excavation of cable trench as per cable route plan,1.0 mt. deep and 300mm wide along side the track in normal soil/strata, conforming to distances as per cable route plan and refilling after cable laying. This work includes covering of cable laid in trench by loose soil for a layer of 50mm thickness after clearing of 17 route,bushes etc.It shall be ensured that top of the cables laid is at a depth of 0.8 m or more If it is less,then the width and depth shall be suitably increased and accordingly proportuonate payment shall be made .In case depth of trench is not achievable due to site conditions,Proportionate payment will be made as per procedure.The work shall be done as per the extant practice on Central Railway and instructions of Railway Engineer at site.Drg No.SK 805
6000
350
1926750
... More
Excavation of cable trench as per cable route plan,1.0 mt. deep and 300mm wide along side the track in hard soil, conforming to distances as per cable route plan and refilling after cable laying. This work 18 includes covering of cable laid in trench by loose soil for a layer of 50mm thickness after clearing of route,bushes etc.It shall be ensured that top of the cables laid is at a depth of 0.8 m or more If it is less,then the width and depth shall be suitably increased and accordingly proportuonate payment shall be made .In case depth of trench is not achievable due to site conditions,Proportionate payment will be made as per procedure.The work shall be done as per the extant practice on Central Railway and instructions of Railway Engineer at site.Drg No.SK 805
1340
583
717175.07
... More
Cutting of all types of Roads/ platforms (except concrete type ) for trenching and excavation to depth of 300mmx300mm wide approx. and refilling after laying of RCC/GI/DWC pipe & to restore them to original condition. The work shall be done as per extant practice on C.Rly & instructions of Rly engineer at site.SK-807
100
2916
267604.47
... More
Fixing of GI pipes for crossing the culverts, bridges etc. and concreting of ends with brick masonry at both ends as per the instruction of Rly engineer at site.
1200
69
77036.97
... More
Digging of trench 1.0M deep from rail flange/road level (for LC) and 0.3 mtrs to 0.6 Mtrs wide and 21 back filling after placing of DWC/RCC/GI pipe (Placing of DWC/RCC/GI pipe coverd separately) The ballast disturted be screened and dressed as required by Engineerin-charge or his representatives and road tarred immediately.Drg No.SK 806
100
583
53520.53
... More
Laying of DWC/RCC pipes alongwith collars/RCCHalf round pipe in trenches at places of track and road crossings, platform cuttings etc. 87B 72.00 Kilometre 5197.42 374214.24 (-) 8.25 343341.57
1500
56
78239.81
... More
Laying of signalling/Power/Telecom cable of various cores/sizes in trenches.
72
5197
343341.57
... More
Placing and securing of cable route markers in trenches at the specified interval and at diversions, joints etc along the cable route. The work shall be done as per extant practice on C Railways & the instruction of Rly engineer at site.
520
12
5978.06
... More
Whereever depth of 0.5 m cable trench is not feasible cable shall be protected as under :- Preparation of cement mixture 1:3:6 with contractor's own materials and spreading cement concrete mixture layer of 100 mm thick over the already laid cables in the excavated trench.
30
5329
146695.86
... More
"Fixing of modular terminal/fuse blocks alongwith all accessories with provision of fixing holes on 26 hylam sheets/side angles of Loc Box and fixing by galvanised nuts & bolts. This includes fixing of DIN channel alongwith PVC Comb type 'C' channel (size 2 inch x 2 inch) for cable termination on modular terminal. The PVC channel with cover to be supplied by firm as required. The work shall be done as per the instruction"
4000
19
69913.5
... More
"Termination of cable cores on ARA terminal/Disconnecting link/fuse blocks, in the apparatus Cases/ cable termination rack. This includes all associated works of pulling out the cable from underground. The work shall be done as per location plans and instructions of Rly engineer at site." 103 1300.00 Metre 2610.46 3393598.00 (-) 8.25 3113626.17 28
11500
7
74913.88
... More
Laying of RCC half round cement pipe of approximate size (150/300 mm dia X 2 Meter length) inside the trench after laying of cable. Pipes shall be placed as per directives of engineer
15000
36
501643.13
... More
Painting of two coats of synthetic enamel paint over one coat of primer on the following after scraping & cleaning surface wherever necessary with contractor' own supply of paints.Wherever required 30 contractor shall apply coating of epoxy paint also as per instructions of site-in-charge.Epoxy paint will be supplied by Railways. NOTE:- The paint and primer should be from M/s Asian paints Co. Ltd.,. The paints will be primer (IS 5660 of 1970) the Aluminium synthetic black enamel (IS 2932 of 1974) brilliant white and yellow Painting two coats of enamel paint over one coat of primer. A) Apparatus Case Full Size.
50
435
19975.81
... More
Lettering / Numbering of Signals, Point Machine, Track Lead Junction Boxes, Block Joints, Apparatus Cases etc. (each item to be taken as One Unit) This work will be carried out as per the standard practice being followed in Central Railway.
50
56
2598.36
... More
Lettering / Numbering Termination particulars, equipments names etc., legibly and neatly inside location boxes. A) FULL CASE
50
263
12089.44
... More
Installation of relay rack assembly including IDF pillars if any complete with wall support, scaffolding, ladders, runway for cables,Relay/Relay group base plates, fixing of Tag block etc.The work shall be done as per approved plan, extant practice on C. Railway & instruction of Rly. Engineer at site.
16
1534
22529.84
... More
Installation of Cable Termination Racks Assembly complete including wall supports, scaffolding, Disconnecting links/ARA terminal, 96 way tag block cover & other necessary accessories etc. The work shall be done as per approved plan, extant practice on C. Railways & the instruction of Rly engineer at site.
8
1306
9590.66
... More
"Fixing of Q series relay base plate/metal to metal relay mini group and major group base plate, laying, bunching, lacing, dressing & packeting of 60/40 core PVC indoor cable/flexible wire and termination of 3 60/40 core cable/flexible wire on tagblock/base plate & base plates & soldering. This includes fuse wiring, bus bar looping etc. required for keeping installation ready for circuit wiring work & panel throughing work. The work shall be done as per approved plan, extant practice on C.Rly. & the instruction of Rly. Engineer at site." (NUMBERS=TAG BLOCK)
32
626
18382
... More
Circuit wiring/jumpering as per circuit diagrams in the relay racks/IDF rack tagblocks. This 4 includespreparation of Jumper sheets by wire man duly checked by firm's site supervisor & wire to wire testing as per circuit diagram. Any wrong jumper done by wireman will not be paid & correction shall be done free of cost.Jumper wires will be issued by Railways. Good quality solder rosin core to be supplied by contractor for soldering of Jumper wires. Soldering of jumper wires (NUMBERS=JUMPER)
2400
12
26798.34
... More
Wiring,Fixing & commissionig of modular of fuse 0.6 to 4 Amp rating alarm system having change over arrangement and potential free contact witing at Datalogger IDF Etc as per instruction of Railway Engineer (Module of 32 nos fuses) (NUMBERS= nUMBER OF MODULES)
16
646
9496.05
... More
Lettering & Numbering of detail and description writing of particulars of terminations & equipments 6 on relay rack, relays, cable termination rack, battery & power equipments, IPS, operating panel, axle counter etc constituting entire system with contractor's own paint and writing material ("Asian/Dulux" make enamel paints to be used). The work shall be done as per extant practice on C.Rly & instruction of Rly engineer at site.
16
368
5409.14
... More
Fabrication and fixing of phenolic laminated/Fibre glass sheet in location box by providing all 7 fixtures as per Railway Drawing including fixing of PVC coated/with PVC pipe covered string rods at the back side for cable support with contractor's own materials. The work shall be done as per drg and arrangement similar to SK 783-1/2. with latest alterations & as per instructions of Rly engineer at site. A) Single Case
32
2251
66110.79
... More
Fabrication and fixing of phenolic laminated/Fibre glass sheet in location box by providing all 8 fixtures as per Railway Drawing including fixing of PVC coated/with PVC pipe covered string rods at the back side for cable support with contractor's own materials. The work shall be done as per drg and arrangement similar to SK 783-1/2. with latest alterations & as per instructions of Rly engineer at site. B) Half Case Per 44B 8872.00 14.05 124651.60 (-) 8.25 114367.84
16
1984
29136.57
... More
Excavation and Casting of Apparatus Case foundation with contractors Anchor bolts, cement, ballast and other materials.The required Scaffolding Ferma etc for Casting of foundation will have to be brought by the contractor ar his own cost A) Single Case as per Drg No SK 803
32
9887
290282.91
... More
Excavation and Casting of Apparatus Case foundation with contractors Anchor bolts, cement, ballast and other materials.The required Scaffolding Ferma etc for Casting of foundation will have to be brought by the contractor ar his own cost B) Half Case as per Drg No SK 804
16
9693
142306.89
... More
Erection of Apparatus Cases. This includes filling of location foundations and plastering A) Single Case
32
1098
32238.45
... More
Erection of Apparatus Cases. This includes filling of location foundations and plastering B) Half Case
16
842
12366.43
... More
Installation of Eqpt. (Relays, resistance, chargers batteries etc.as applicable) & wiring of the same in apparatus Cases as per location diagrams & circuit diagrams, as per Instruction of site incharge and practice. A) Single Case
32
1497
43973.06
... More
Installation of Eqpt. (Relays, resistance, chargers batteries etc.as applicable) & wiring of the same in apparatus Cases as per location diagrams & circuit diagrams, as per Instruction of site incharge and practice. B) Half Case
16
1017
14941.01
... More
Installation of earth electrode assenbly as per Drg.No.RE/S&T/SIG/Tender/SK726/85 including earth wire connected through GI wire 8 SWG supported on M.S. flat of size 6mm x 40 mm to earth electrode as 17 per drg. No.CR/S&T/SK-815 for sigg. Equipment such as lever frames, apparatus case, signals, relay racks,block insruments, and etc. as per RE manual. The earth value should be less than 10 Ohms including the lead wire. The value should be measured in presence of Rly. supervisor. It should be documented and painted on earth enclosure made of concrete.( only earth electrode will be supplied by Railway). All other material required for provision of earthing will be brought by the contractor.
48
2528
111339.29
... More
Installation of unit earth as per RDSO/SPN/197/ver I or latest, to construct earthing of
48
5290
232986.57
... More
Installation, wiring & Testing/commissioning of Axle counters Reset Box of all types in Cabin/Panel 19 Room and wiring the same to integrate with the axle counter as per the instruction of Railway engineer at site. This includes laying & termination of cable, if any from Panel Room/Axle couter room/Relay room to Reset Box in DWC pipe/existing ladder.
8
7665
56263.82
... More
Supply, fixing & Wiring of mismatch panel dipcting Indication Panel/VDU layout with contractors own material like LEDs for each track section, flexible wire, connecting terminals, buzzer etc. The work shall be done as per extant practice on C. Rly & the instruction of Rly engineer at site.
8
50121
367890.42
... More
Excavation of cable trench as per cable route plan,1.0 mt. deep and 300mm wide along side the track in normal soil/strata, conforming to distances as per cable route plan and refilling after cable laying. This work includes covering of cable laid in trench by loose soil for a layer of 50mm thickness after clearing of 21 route,bushes etc.It shall be ensured that top of the cables laid is at a depth of 0.8 m or more If it is less,then the width and depth shall be suitably increased and accordingly proportuonate payment shall be made .In case depth of trench is not achievable due to site conditions,Proportionate payment will be made as per procedure.The work shall be done as per the extant practice on Central Railway and instructions of Railway Engineer at site.Drg No.SK 805
2800
350
899150
... More
Excavation of cable trench as per cable route plan,1.0 mt. deep and 300mm wide along side the track in hard soil, conforming to distances as per cable route plan and refilling after cable laying. This work 22 includes covering of cable laid in trench by loose soil for a layer of 50mm thickness after clearing of route,bushes etc.It shall be ensured that top of the cables laid is at a depth of 0.8 m or more If it is less,then the width and depth shall be suitably increased and accordingly proportuonate payment shall be made .In case depth of trench is not achievable due to site conditions,Proportionate payment will be made as per procedure.The work shall be done as per the extant practice on Central Railway and instructions of Railway Engineer at site.Drg No.SK 805
160
583
85632.84
... More
Cutting of all types of Roads/ platforms (except concrete type ) for trenching and excavation to depth of 300mmx300mm wide approx. and refilling after laying of RCC/GI/DWC pipe & to restore them to original condition. The work shall be done as per extant practice on C.Rly & instructions of Rly engineer at site.SK-807
96
2916
256900.29
... More
Fixing of GI pipes for crossing the culverts, bridges etc. and concreting of ends with brick masonry at both ends as per the instruction of Rly engineer at site.
192
69
12325.92
... More
Digging of trench 1.0M deep from rail flange/road level (for LC) and 0.3 mtrs to 0.6 Mtrs wide and 25 back filling after placing of DWC/RCC/GI pipe (Placing of DWC/RCC/GI pipe coverd separately) The ballast disturted be screened and dressed as required by Engineerin-charge or his representatives and road tarred immediately.Drg No.SK 806
96
583
51379.71
... More
Laying of DWC/RCC pipes alongwith collars/RCCHalf round pipe in trenches at places of track and road crossings, platform cuttings etc. 87B 88.00 Kilometre 5197.42 457372.96 (-) 8.25 419639.69
7392
56
385565.8
... More
Laying of signalling/Power/Telecom cable of various cores/sizes in trenches.
88
5197
419639.69
... More
Placing and securing of cable route markers in trenches at the specified interval and at diversions, joints etc along the cable route. The work shall be done as per extant practice on C Railways & the instruction of Rly engineer at site. 90B 64.00 Numbers 3562.19 227980.16 (-) 8.25 209171.80
240
12
2759.11
... More
Jointing of 4 / 6 quad cable with Heat Shrinkable straight through Jointing Kit for 4 / 6 quad cable.
64
3562
209171.8
... More
Provision of brick masonary duct as per Rly.Drg.No. PA/N/CN/STD/19(modified) after cutting of platform/excavating the earth for the duct with contractor's own materials and restoring the excavated earth to its original condition.
80
2034
149357.99
... More
Whereever depth of 0.5 m cable trench is not feasible cable shall be protected as under :- Preparation of cement mixture 1:3:6 with contractor's own materials and spreading cement concrete mixture layer of 100 mm thick over the already laid cables in the excavated trench.
48
5329
234713.38
... More
"Fixing of modular terminal/fuse blocks alongwith all accessories with provision of fixing holes on 32 hylam sheets/side angles of Loc Box and fixing by galvanised nuts & bolts. This includes fixing of DIN channel alongwith PVC Comb type 'C' channel (size 2 inch x 2 inch) for cable termination on modular terminal. The PVC channel with cover to be supplied by firm as required. The work shall be done as per the instruction"
2400
19
41948.1
... More
Laying of GI pipes in on bridges/culverts/concrete drain/ mountain ridges etc. with suitable GI bend shall be provided where there is turning of pipe as per instructions of the site engineer. GI Clamps at every 2 m as shown in the drawing to be fixed. Suitable holes to be made in the pipe before laying as per instructions of the site engineer. 100 mm dia. Drg No SK 808
192
143
25286.01
... More
Horizontal boring of cable duct of minimum 2.0 mtr depth along with laying of 120 mm HDPE pipe for track crossing wirh minimum depth reckoned from bottom of the rail/Road crossing with minimum depth 34 reckoned from ground level. The work shall be done as per extent practice & instruction of site engineer.Preparation of site for Horizontal boring shall be carried out in presence of Railway Representative.HDPE will be supplied by Railway. Note:- Contractor shall provide all material required for boring and adequate nos.of labours for proper laying of cable into the bore.Cable shall be laid cautiously so that it should not get damage due to rough handling & pressure on cable.
288
2610
689787.95
... More
Laying of RCC half round cement pipe of approximate size (150/300 mm dia X 2 Meter length) inside the trench after laying of cable. Pipes shall be placed as per directives of engineer
4800
36
160525.8
... More
Painting of two coats of synthetic enamel paint over one coat of primer on the following after scraping & cleaning surface wherever necessary with contractor' own supply of paints.Wherever required 36 contractor shall apply coating of epoxy paint also as per instructions of site-in-charge.Epoxy paint will be supplied by Railways. NOTE:- The paint and primer should be from M/s Asian paints Co. Ltd.,. The paints will be primer (IS 5660 of 1970) the Aluminium synthetic black enamel (IS 2932 of 1974) brilliant white and yellow Painting two coats of enamel paint over one coat of primer. A) Apparatus Case Full Size.
32
435
12784.52
... More
Painting of two coats of synthetic enamel paint over one coat of primer on the following after scraping & cleaning surface wherever necessary with contractor' own supply of paints.Wherever required 37 contractor shall apply coating of epoxy paint also as per instructions of site-in-charge.Epoxy paint will be supplied by Railways. NOTE:- The paint and primer should be from M/s Asian paints Co. Ltd.,. The paints will be primer (IS 5660 of 1970) the Aluminium synthetic black enamel (IS 2932 of 1974) brilliant white and yellow Painting two coats of enamel paint over one coat of primer. B) Apparatus case Half Size.
16
326
4800.21
... More
Lettering / Numbering of Signals, Point Machine, Track Lead Junction Boxes, Block Joints, Apparatus Cases etc. (each item to be taken as One Unit) This work will be carried out as per the standard practice being followed in Central Railway.
48
56
2494.43
... More
Lettering / Numbering Termination particulars, equipments names etc., legibly and neatly inside location boxes. A) Full Case.
32
263
7737.24
... More
Lettering / Numbering Termination particulars, equipments names etc., legibly and neatly inside location boxes. B) Half Case.
16
150
2202.44
... More
Supply of cable route marker as per RST/C/203 of FRP. (Inspection By Consignee)
520
360
187657.6
... More
Design of alteration in existing Signalling Circuits & supply of modified signalling circuits including Panel diagram , Route section Plan , Selection Table , Fuse & Negative Tag. Analysis , Contact analysis , Relay Rack Arrangement and wire count sheets etc. in A3 size.Completion circuit shall be plotted in AutoCAD. The 2 contractor shall initially supply 2 sets of circuits duly signed by the circuit designer having substantial experience on design side for making such circuits, complete for approval of Railways. Railways will return one set of circuit to the contractor duly approved with alterations /corrections, if any. The contractor/Railway will commission the station with the based on these approved circuit diagram. The contractor will submit final tracing & CD ( soft copy of Drg.) based on panel testing,break test,square sheet test etc. to Railway for their final approval.complete in all respects along with 4 sets of final .
8
95000
760000
... More
Supply of True RMS Multimeter Fluke Make model 289 or similar (Inspection By Consignee)
5
60425
302129.55
... More
Supply of Plug In type relay (NAC I) 4F/4B,5F/3B,6F/2B Style HTMN-K DC neutral line 60 V confirming to IRS: S46 IRS:S34 and IRS:S23 .The relay housing shall contain Two miniature identical relays in a Mini group Housing complete with base plate Type HTMN-K . (Inspection By RDSO)
40
5000
200000
... More
"Supply of Mechanicaly interocked relay [double type] TMA 60V 4F/4B TYPE [TMA 1144/112GUM] as per specification no. IRS/S-23, S - 34, S-46 as applicable.a) Mechanically interlocked relay (double) TYPE TMA, 60V DC. b) plug in base for interlocked relay 60V DC. (Inspection By RDSO)
30
9500
285000
... More
Supply of Polyolefin Cable channel with following dimensions, height (internal/external) 155mm/230mm x width 240mm/340mm x length 1000mm with suitable detachable cover having fire protection (Inspection By RITES)
13000
2431
31607810
... More
Laying of RCC Trunking / Ployfin cable channel and capping and sealing after cable laying as per std practice on C.Rly & the instruction of site engineer. (Inspection By Consignee)
13000
70
918060
... More
Supply of report generation unit as Laser Mono Computer Printers for A4 paper size conforming to Clause No.3.23 of Chapter III of tender document. (Inspection By Consignee)
3
16492
49476
... More
"Supply of TRMS Datalogging DMM Fine Tip multimeter make-Rishabh 6016 or similar." (Inspection By Consignee)
4
21956
87824
... More
"Supply of AC/DC clamp on Ammeter make-Amprobe LH41A" (Inspection By Consignee)
2
52527
105055.6
... More
Supply of Insulation resistance tester with3-3/4 digital display make Rishabh RISH MIT30 or Motwane D2K-M. (Inspection By Consignee)
5
11316
56582.95
... More
"Supply of DC-DC converter modulesof IPS of various supplies/make.(As per site requirement.)" (Inspection By RDSO)
40
13782
551280
... More
"Supply of Cabinet with wiring arrangement for DC-DC converter 08 Nos. suitable for Station" (Inspection By Consignee)
5
59722
298610
... More
"Supply & testing of precision Cable locator / Route tracer with MXT4 Transmitter & Signal Clamp of 14 make CSCOPE U.K or its equivalent as per enclosed specification. ACCEPTED FIRM'S OFFER MAKE - CSCOPE, U K : MODEL -MXL4 . PURCHASE PROOF FROM OEM/ AUTHORISED DEALER AND OEM'S WARRANTY CERTIFICATE ARE TO BE SUBMITTED ALONG WITH SUPPLY. MATERIAL IS TO BE SUPPIED AS PER TENDER DESCRIPTION AND SPECIFICATIONS ." (Inspection By Consignee)
2
389400
778800
... More
Supply of TELEMETRICS Rechargeable Handheld Telecom TDR Cable Fault Locator 1 year Brand: TELEMETRICS (Detailed Description/ Specification as per Product # 1 of GeM Contract No. GEMC511687710737935 dt.17/02/2023) (Inspection By Consignee)
2
201665
403330
... More
Chase cutting 500mm deep in hard rocky area as per DRG Ni- CORE/S&T/ALD/SK/579/04 per meter (Inspection By Consignee)
350
303
106249.5
... More
Supply of Bumpless Automatic power source change over Device DC -20V-120V,min 40 A (2 input sources) Model no. PT-RSA-HL-DC-04 or RE-SDSM-40 or similar.(Inspection By Consignee)
22
54516
1199352
... More
Supply of 110 mm Diameter PE 100 HDPE Pipe (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687786912153 dt.08/12/2023) (Inspection By Consignee)
1300
289
376870
... More
Fast Document Scanner /Tower iBall Clickscan A 305 or similar 1. Captured Size %u2013 Up to A3 19 Size 2. Adjustable Height Option A-5/A4/A33. Captured Speed %u2013 Appx. 1 Second4. Image Adjustment %u2013 Color(R/G/B) and Brightness, Hue, Exposure , sharpness adjustment and Gain Control.Firm's offer- CZUR CMOS 600 DPI Table top (withoutcomputer and display screen) book scanner,Brand-CZUR,Model-CZUR ET16 Plus as per GeM Contract No: GEMC-511687701796145 dated 29.09.21 (Inspection By Consignee)
2
40120
80240
... More
Battery operated rail core drill along with additional 18 mm TCT rail core drill. Maximum core cutting 20 capacity 36mm, rated speed 250/450ZRPM, Battery type Lion, Battery voltage 50V,Battery pack capacity 4AH,Number of battery supplied - 2No. Charger-1No. Special design pressurized internal spindle cooling to give maximum life of core cutter by avoiding heating.3 sets of 22,13,16,7.2 gauge drills adapters to be provided along with the machine,weight of machine with battery18.5Kg Make :Eibenstok, Bosch, KPT (Inspection By Consignee)
2
185968
371936
... More
Supply of Digital Clamp ON EARTH Tester ( make: HTC CE8201 or Fluke make ) LCD display Auto ranging Digital Earth Resistance Meter. The tester shall have 02 years of OEM warranty. (Inspection By Consignee)
3
95467
286403.7
... More
Supply of Train Shunt Resistance (TSR) Meter Range 0 to 11 ohm's 100 watt with seale increment 22 0.05 ohm having four test leads details specification(1). Range- 0 to 11 Ohm's, (2). Lowest scale- 0.05 Ohm's, (3). Test leads- Four Nos(Two test leads with alligator clip to hold lower side flip of rail and two test leads with clamp holding top of rail), (4). Bag- 01 No. for carrying accessories, (5). TSR meter rust proof carrying box with insulated handle. (6).Scale clear marking (Inspection By Consignee)
3
3392
10177.5
... More
Supply of Casio KL-G2 label printing machine. (Inspection By Consignee)
2
16269
32539.16
... More
"Supply of Label 12 mm x 8 M length XR-12YW1 make Casio and suitable for Casio KLG2 label printing machineXR-12YW1." (Inspection By Consignee)
10
607
6076
... More
"Supply of Label 24 mm x 8 M length XR-24YW1 make Casio and suitable for Casio KLG2 label printing machine. " (Inspection By Consignee)
4
1079
4318.28
... More
"Supply of Label18 mm x 8 M length XR--18YW1 make Casio and suitable for Casio KLG2 label printing machine. " (Inspection By Consignee)
4
808
3233.32
... More
Supply of Polycarbonate cover for 200 way Tag Block (Inspection By Consignee)
40
345
13801.2
... More
"Supply of operator VDU 55 inch as per specification. (Make: Samsung/Sony/ LG). Warranty 3 years from date of supply. " (Inspection By Consignee)
2
57962
115925.74
... More
Supply of Drill bit 7.2mm (Inspection By Consignee)
70
125
8750
... More
"Supply of Cycle drill machine hand operated parallel type. " (Inspection By Consignee)
4
9723
38892
... More
Supply of High spped ratchet type drill bit 14 mm. (Inspection By Consignee)
20
871
17439.2
... More
Supply and installation of SMPS based Battery Charger 230V AC Single phase 50HZ supply, output voltage 160V to 190V DC/40A for Point machine operation and suitable to charge 90 cells of VRLA batteries.Make:Statcon or Amara Raja or HBL. (Inspection by RDSO)
2
278414
556829.72
... More
"Supply of High speed ratchet type drill bit. Size- 13 mm dia. Full length 145 mm flute Excise Duty - length 90 mm as per IS specn. IS: 503 DIN 345 square shank. Make - IT/MIRANDA/ JK, HSN code - 8207"" (Inspection by Consignee)."
10
1550
15500
... More
"Supply of Electric drill machine 13 mm impact CAT No.KPT563 power input 550- W no load speed 1200 RPM drilling capacity 13/25/210 KPT make. (Inspection by Consignee)."
4
7500
30000
... More
"Supply of 512 input digital expansion mother board for 99/06 Data Logger. For Up gradation of existing data logger of stations" (Inspection By RDSO)
2
65000
130000
... More
Supply of 128 inputs digital tag block.For Up gradation of existing data logger of stations. (Inspection By RDSO)
6
15000
90000
... More
"Supply of Rare plate and 64 Pin Connectors. For Up gradation of existing data logger of stations." (Inspection By Consignee)
12
25000
300000
... More
"Supply of Yard Simulation and Digital input updation Software. " (Inspection By Consignee)
8
25000
200000
... More
Supply of Euro rack (Inspection By Consignee)
6
25000
150000
... More
Supply of Housing Rack . (Inspection By Consignee)
6
35000
210000
... More
Testing and commissioning of 512 digital inputs (Inspection By Consignee)
8
20000
160000
... More
"Installation of item Automatic changeover unit of signal/ Track /Point supply of 32A, DC consisting of 3TC44 contactors or similar , LED Lamp, Push button terminals, VSR, polarity switches. " (Inspection By Consignee)
50
5325
266293.5
... More
Supply of cable route marker as per RST/C/203 of FRP. (Inspection By Consignee)
320
360
115481.6
... More
Supply of Tool box complete with megger . (Inspection By Consignee)
8
121110
968880
... More
Supply of cable fault locator make stanlay (Inspection By Consignee)
8
139240
1113920
... More
TRMS Datalogging DMM Fine Tipmultimeter make-Rishabh 6016 or similar (Inspection By Consignee)
24
21956
526947.36
... More
Supply of True RMS Multimeter Fluke Make model 289 or similar (Inspection By Consignee)
8
60425
483407.28
... More
Supply of Polyolefin Cable channel with following dimensions, height (internal/external) 155mm/230mm x width 240mm/340mm x length 1000mm with suitable detachable cover having fire protection (Inspection By RITES)
4800
2431
11670576
... More
Laying of RCC Trunking / Ployfin cable channel and capping and sealing after cable laying as per std practice on C.Rly & the instruction of site engineer.
4800
70
338976
... More
Fixing of track devices ( Transmitter coil and receiver coil ) to the rails , fixing of EJB in the location 2 ,connection of track device to EJB using DWC pipe of suitable length and wiring of EJB ,testing and adjustment of transmitter and receiver to obtained required channel level as per standard practices on C.rly and instructions of Rly Engineer on site Per
133
10748
1429593.06
... More
Fixing of track devices ( Transmitter coil and receiver coil ) to the rails , fixing of EJB in the location 2 ,connection of track device to EJB using DWC pipe of suitable length and wiring of EJB ,testing and adjustment of transmitter and receiver to obtained required channel level as per standard practices on C.rly and instructions of Rly Engineer on site Per
48
10748
515943.36
... More
Wiring and charging of Integrated Power Supply to signalling installation.. This includes connection of MF earth of 1 ohm earth resistance , for IPS and power distribution connection to bus bars and relay racks in the room with contractor's own wiring materials and fabrication and fixing of AC/DC power distribution board 1 made on 10mm thick Phenolic hylam sheets or any standard make with connections suitable for 63 A.Wiring to be done considering site requirement , depending upon the load with suitable wires,lugs & glands as per instructions of Engineer-in-charge. This item also includes supply & fixing of ladder along the wall for carrying power supply wires/cables from IPS room to Relay room/power room and potential free contact wiring at Datalogger IDFetc. (Inspection By Consignee)
3
31176
85814.09
... More
Supply, checking of installation, testing and commissioning of SMPS based integrated power supply conforming to RDSO Specifications RDSO/SPN/165/2012 Version 3.0 with latest amendments for Panel Interlocked station as per Central Rly. Drg.No.SK-790/1/A (Inspection By RDSO)
3
1521582
4564748.58
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements