Zilla Parishad Tender

Single layer brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand

Cement concrete with 30mm down graded stone shingle excluding shuttering in ground floor. (i) 6:3:1 Proportion

Ordinary cement concrete with grade River Bazree(1:1.5:3) (20mm size) excluding shuttering and reinforcement .if any ,in ground floor. By River bazree

Reinforcement for reinforced concrete work in all sorts of structure including distribution bars, stirrups, binders etc. including supply of rods etc.----------etc. complete as per drawing and direction. Other than TATA/SAIL/RNTL

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness etc-------------etc. after completion of works.25 mm to 30mm thick wooden shuttering upto P.L GROUND FLOOR

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness etc-------------etc. after completion of works.25 mm to 30mm thick wooden shuttering above P.L GROUND FLOOR

Brick work with 1st class bricks in cement mortar (1:6)(a) In foundation and plinth

25 mm thick damp proof course with cement concrete with stone chips (1:1.5:3) with graded stone aggregate 10 mm nominal size and admixture of water proofing compound as per manufacturers specification followed by two coats of polymers based paint, (1st coat after 4 to 5 days of concrete laying and 2nd coat just before brick masonry work) as directed.

125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.

M.S. & W.I. Ornamental grill of approved design with MS flats or bars with joints continuously welded for windows railing etc. fitted and fixed in position with lugs and screwsand lugs in G.F. i) Grill weighting above 10 Kg /m2 and upto 16Kg./m2.

Providing and fixing PVC Door Frame of size 50x47mm with a wall thickness of 5mm (± 0.2 mm) made out of single piece extruded PVC profile, with mitred cut joint sand joint with 2 nos. of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 mm x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The doorframe to be fixed to the wall using 8 x100mm long anchor fasteners complete, all as per manufacturer‟s specification and direction of Engineer -in- charge.

PVC Door Shutter-37 mm thick: Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of suitable size and section with 2.0 mm (+/-0.2 mm) wall thickness, the section will have 2nos. built in beads, horizontal & vertical section shall be fixed to each other by self tapping ................................k and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliencies. Carriage of all materials taxes and all other incidental charges complete.The rate is exclusive of cost of hinges, hasp bolt, tower bolt,door ring etc.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints etc.-----etc. complete where necessary.(ground floor). 10 mm 4:1

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints etc.-----etc. complete where 20 mm6:1

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints etc.-----etc. complete where 15 mm6:1

Neat cement punning about 1.5 mm th. In wall, dado, windowsill, floor drainetc.Cement0.152cu.m.per 100sq.m.

Priming one coat on steel or other metal surface with super gloss: ( hi-gloss) (iv) two coats ( with any shade except white )

(A) Painting with best quality synthetic enamel paint of aproved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary.

Colour washing with ''ELLA'' with a coat of white wash priming including cleaning and smootheing surface thoroughly. (i) Internal surface. (b) Two coats.

Supplying & fitting Fixing 1st quality Ceramic tile in Wall & floor to match with the existing work & 4 nos key stone(a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative

Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification.

Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,Part- I.Payment will be made separetly on the basis of actual height based on relevant 40mm

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer.500lt

Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. (a) For Exposed Work (i) CPVC Pipes Class-1, SDR-11 32mm

Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. 25 mm

Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing).ii) 530 mm X 410 mm

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to

Supplying, fitting and fixing bib cock or stop cock.15 mm dia PTMT

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).40 mm

Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore. (a) For depth upto 150 metre.40 mmdia

Supplying pvc strainer with Brass net & jacketted of approved quality

Supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets.

Supplying, fitting and fixing chech valve (vertical) G.M. tested to 21 kg per sq. cm.

Supplying fitting fixing papular Maya Pump

Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. (ii) CPVC Pipes Class-2,SDR-13.5 40mm

Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. I)470 mm X 280 mm X 340 mm

Distribution wiring in 1.1 KV grade 2 x 1.5 sqmm single core standed 'FR' PVC insulated & unsheathed copper wire (approved make) in suitable size PVC casing caping (Precision make) with 1 x 1.5 sqmm single core standed 'FR' PVC insulated & unsheathed copper wire for ECC, including necessary PVC clips, fittings etc to light / fan/ call bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex / bakelite top cover on wall including necessary connections and making earthing attachment and mending good damages to building works ( PVC casing-caping on surface and switch board concealed).

Supply & fixing 1 Hh. Pump including civil work

ADD GST 18%

ADD LWC 1%