Zilla Parishad Tender

... More
The ZP has issued a formal invitation for competitive bids for the Zilla Parishad project, for 5construction Community Toilet At Uttar Shibkata Majherdabri Ssk Csc, Majherdabri Tg Spl Cader Pry School Cscbhasardabri Pry School Cscuttar Shibkata Joteline Ssk Cscunder Majherdabri Gp With In Alipurduar Ii Block in Alipurduar, West Bengal, with an estimated contract value of Rs. 8,52,853. The bid opening date for this tender is 04-11-2026 and the last date for bid submission is 19-11-2026. Interested bidders for Zilla Parishad tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Zilla Parishad - ZP Tender - WB Tender

Opening Date4 Nov 2026
Closing Soon19 Nov 2026
Tender Amount₹ 8,52,853 
Notes
Download

Costs

Summary

5construction Community Toilet At Uttar Shibkata Majherdabri Ssk Csc, Majherdabri Tg Spl Cader Pry School Cscbhasardabri Pry School Cscuttar Shibkata Joteline Ssk Cscunder Majherdabri Gp With In Alipurduar Ii Block

Description

Construction Community Toilet At Uttar Shibkata Majherdabri Ssk Csc, Majherdabri Tg Spl Cader Pry School Cscbhasardabri Pry School Cscuttar Shibkata Joteline Ssk Cscunder Majherdabri Gp With In Alipurduar Ii Block

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (ii ) River Bazree

14.148

4745

67132.26

... More
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation and upto roof of ground floor/upto 4 m

0.88

59102

52009.8

... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.

100.8

328

33062.4

... More
(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.

2.652

10021

26575.69

... More
Supplying, fitting & fixing factory made foam PVC (density shall not be less than 600 kg/cum) door frame (finished weight of 2.73 kg/mtr.) of size 100mm X 45mm made off with 5mm thick extruded foam PVC sheet, mitre cut at junction of horizontal and vertical member and joined them by heat welding. Entire door frame profiles to be reinforced with steel primer coated 19 SWG 40mm X 20mm M.S. tube. An additional 5mm thick PVC sheet with desired colour/shade to be provided at the exposed surface and three nos 5mm thick PVC sheet to be provided as gap insert. The door frame to be fixed with wall by using 8mm dia. and 100mm long strainless steel screws and PVC fasteners. A minimum of 4 nos. screws to be provided for each vertical member & 2 nos. for horizontal member all complete as per direction of Engineer-in-Charge. (b) Pre-laminated Colour.

33

562

18546

... More
Supplying, Fitting & Fixing 30 mm thick Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 5 mm th. both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge. In ground floor.

18

2727

49086

... More
25 mm. thick damp proof with cement concrete (1:1.5:3) (with graded stone aggregate 10 mm. normal size) and painting the top surface with a coat of bitumen [VG.40 ] using 1.7 kg. per sq.m. including heating the bitumen and cost and carriage of all materials complete. [Bitument to be supplied by the Agency]

18.384

196

3603.26

... More
Brick work with 1st class bricks in cement mortar (1:6) (a) In Foundation & Plinth

23.1

4896

113097.6

... More
(b) In superstructure; ground floor

26.4

5119

135141.6

... More
125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor

60.984

674

41103.22

... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor) (ii) With 1:6 cement mortar B) 20 mm thick

143.76

161

23145.36

... More
(ii) With 1:4 cement mortar B) 15 mm thick

209.16

157

32838.12

... More
c) With 1:4 cement mortar B) 10 mm thick

103.32

126

13018.32

... More
Priming one coat on timber or plastered or on steel or other metal surface with synthetic enamel/oil bound primer of approved quality including smoothening surfaces by sand papering etc. a) On steel surface

20.4

29

591.6

... More
(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : . On steel surface with any shade except white . Two coats.

20.4

79

1611.6

... More
Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (iii) 75mm. X 40mm. X 1.12mm.

56

28

1568

... More
Iron socket bolt of approved quality fitted and fixed complete. (b) 100mm long x 10mm dia bolt.

28

34

952

... More
Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:

28

69

1932

... More
at cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m

46.44

34

1578.96

... More
Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification. (iii) Two coats

240

49

11760

... More
Add 7.5 % S & P

1

49925

49925.66

... More
GST 18%

715601.18

-

128808.21

... More
Cess 1%

844409.39

-

8444.09



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.