Zilla Parishad Tender

Cement concrete with 30mm. down graded shingles excluding shuttering. 6:3:1 proportion.

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes River Bazree in ground floor.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust(if necessary) cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. Tor steel / Mild steel upto roof of ground floor I. JSW/JSPL/SHYAM/SRMB/ BMASL

Hire and Labour charges for shuttering with centering and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for ved or straight including fitting, fixing and striking out after completion of works. 25mm. to 50mm. thick wooden shuttering as per decision & direction. upto roof of ground floor b. upto roof of ground floor with staging

Brick work with 1st class bricks in cement mortar (1:6) (a) In foundation & plinth

125mm. thick Brick work in cement mortar (4:1) in all floor.

Supplying,fitting and fixing 1st quality ceramic tiles in walls and floors to match with the existing work & 4nos. Of key stones (10mm)fixed with araldite at the back of each tile finishing the joints with white cement mixed with colouring oxide if requred to match the colour of tiles including roughening of concrete surface,if necessary or by synthetic adhesive & grout materials etc. (B)wall with Sand Cement Morter (1:3)15mm thick &2mm thick cement slurry at back side of tiles using cement white cement slurry @0.20kg/sq.m.(a)Area of each tile upto 0.09sq.m(1) other then coloured decorative including white .

M.S or W.I. ornamental Grill of approved design joints continuously welded with M.S./ W.I. flats with the bars securely fixed to the flat bars frames with or without intermediate flat bars stiffener and fixed with necessary screws etc. complete as directed. Grill weighting above 16kg./Sqm

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] b. With 1:4 cement mortar. 15mm.thick plaster

M.S. structural works in roof trusses with tubular sections conforming to IS: 806-1968 & IS: 1161- 1998 cnnected to one another with bracket, gusset cleats as per design, irection of Engineer-in-charge complete including cutting to requisite size, fabrication with necessary metal arc welding conforming to IS: 816- 1969 & IS: 9595 using electrodes of proved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour reqired for the work including all incidental chages such as electricity charges, labour insurance charges etc. (MS Medium Pipe).

Supplying, fiiting and fixing single skin colour coated trapeziodal profile fow wall cladding, roof shall be made of 0.45 mm BMT(Base Metal thickness)(0.50mm TCT(Total coated thickness excluding paint , G550( min. 550 yield strength), of Zinacalume mettalic coating (IS15965) with high solar Reflectance Index (SRI) value for better cooling as per thermal technology, 1000-1015 mm efective cover width with five major corrugation, 28 mm high ribbed space at 203mm c/c with subtule square fluting in the pan and the end rib shall have anti capillary groove and return leg. The sheet shall be fastned with 40 micron zinc coated or 25 micron zinc-tin alloy coated, hex head, self drilling screw as per IS 3566-2002 cLASS 3 fastner. The base steel shall be coated with Zinc-alluminium alloy Zincalume (AZ150) (i.e 55 % AI, 43.4% zINC, 1.6% Si) min. 150g/m2 coating total on both side , prep ainted with colourbond XRW (exterior roofing, walling) paint system of 35 micron super polyster paint(SDP) with stable inorganic pigment with no lead contents confirming IS15965. The sheet shall be free from defects and have brand marking of the manufacturer giving product details on the back of sheet in regular interval confirming genuinity of the material . (i) In roof (a) 0.5 mm thick sheet

Applying decorative cement base paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface ) as per manufacturers specification. In ground floor. Two coats.

(b) Priming one coat on steel or other metalsurface with synthetic ename oil bound primer of approved quality including smoothening surface by sand papering etc .

(A)Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc including using of approved putty etc the surface,if necessary.(b)On steel or other metal surface:With super gloss (hi-gloss) (4)Two coats (with any shade except white)

Supply fitting &fixing of Aquaguard stroage cooler cum purifier including fitting fixing complete. [MODEL: AS GREEN PURE CHILL 80PSS UV, Eureka Forbes – Aquaguard Institutional Water Cooler-cum-Purifier(in-built) with Storage Capacity 80Ltrs. with 2nos. Tap

Supply fitting &fixing Iron Removal Filter of 24 inch size of 200 LPH capacity of approved brand as per direction of EIC

Labour of boring Tubewell of requied diameter and depth as per direction of EIC by water jet system through any type of soil strata including hire and labour charges for boring of pipes, scaffolding, other tools and plants as necessary and taking them out as per direction of EIC including lowering pipes, strainer, blank pipe etc fitted and fixed complete including bucket washing and other incidental works in this connection. (a) For Depth upto 150 mtr. (i) 40 mm diameter etc.

Supplying high density polythene strainer of approved make with adapter conforming IS specification.(i) 40mm.dia.

Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (i) 40 mm. dia. Nominal.

Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (i) 20 mm. dia. Nominal.

Supplying, fitting and fixing in position G.I. pipes of TATA make for underground works with all necessary accessories,specials viz.socket, bend, tee, union, cross, elbow, nipple, short piece etc.including cost of all materials,jointing materials ,cutting pipes,making threads,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed with two coats of painting on G.I. pipes and specials with bituminous paint complete in all respect. (v) 40 mm dia. medium quality

Supplying fitting & fixing of 40 mm. diameter steel cutter piece up to 450 mm. long with sockets.

Supplying of 0.50 HP capacity Centrifugal pumpset (Havells or eqivalent)

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer(a) 1000 litre capacity

Electrification Work ( Payment to be made as per Voucher)

Add GST

Add L.Cess