West Bengal State Electricity Distribution Company Limited Tender
... More
The WBSEDCL has issued a formal invitation for competitive bids for the West Bengal State Electricity Distribution Company Limited project, for Construction Of Three (03) Storied Administrative Building Under Memari Division. in Purba Bardhaman, West Bengal, with an estimated contract value of Rs. 2,10,91,628. The bid opening date for this tender is 29-03-2025 and the last date for bid submission is 17-04-2025. Interested bidders for West Bengal State Electricity Distribution Company Limited tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
West Bengal State Electricity Distribution Company Limited - WBSEDCL Tender
Opening Date29 Mar 2025
Closing Date17 Apr 2025
Tender Amount₹ 2,10,91,628.53
Technical
Technical
Technical Capacity
... View More
The bidder is required to have prior work experience of completing similar works during the last 7 years. The eligibility criteria for similar works are as follows: - Three similar completed works costing not less than 40% of the estimated cost, which is Rs. 84.4 Lakhs.
- Two similar completed works costing not less than 50% of the estimated cost, which is Rs. 105.5 Lakhs.
- One similar completed work costing not less than 80% of the estimated cost, which is Rs. 168.79 Lakhs. The bidder must have completed similar works up to a value of 80% of the estimated value put to tender.
Costs
EMD
₹ 4,22,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_WBSED_831955_1Bid Award Id
ViewTender No
ZM/BDN/C/ eTndr(2nd call) /2024-25/12/2483Tender Authority
West Bengal State Electricity Distribution Company Limited ViewPurchaser Address
-Website
http://https://wbtenders.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Supplying, fitting and fixing pillar cock of approved make. a) (i) CP Pillar Cock - 15 mm. (Equivalent to Code No. 507 & Model - Tropical / Sumthing Special of ESSCO or similar brand).
6
560
3363.3
... More
Supplying, fitting and fixing cast iron spun pipe conforming to I.S. 1536/1976 with all necessary specials including cutting trenches in any soil or through masonry, concrete etc., if necessary,and mending good all damages including jointing pipes with Tyton joints as per manufacturer's specifications and filling up the trenches all complete but excluding the cost of masonry or concrete work, if required Class A 1. 250 mm nominal dia.
15
4263
63948.15
... More
Labour for boring tube well of required dia.by water jet system through any type of soil strata including hire and labour charges for boring pipes,scaffolding,tools and plants as necessary and taking out them and lowering pipes,strainers,blind pipe etc.and other fitting and fixing the same complete including bucket washing and other incidental works in the connection.The tube well should have mininum 50 mm gap in between the outside of the tube well pipe and the bore.For depth upto 150 meter for 80 mm dia.Tube well with top enlargement of 150 mm dia.80 mm dia.boring etc.
40
289
11594.8
... More
b) up to 4th floor
300
5648
1694412
... More
Supplying, fitting and fixing 300 mm M.S. housing clamp of approved quality.
1
2257
2257.35
... More
Supplying, profiles of required section made of aluminum alloy extrusive confirming to I.S. 733-1983 and I.S. 1285-1975 anodised film thickness and specification colour/natural) matt finished confirming I.S. 1868-1983 for fabrication of composite door, sliding & casement windows, partitios, formed of basic sections of any ISI embossed/certified make and brand as per direction of Engineer-in -charge (payment will be made on finished length of the work). . A) In 10-12 micron thickness Anodizing film . . a) Movable door i) Door frame (top & sides) shutter :
150
318
47722.5
... More
25mm. thick damp proof course with cement concrete with stone chips (1:1:5:3) [with graded stone aggregate 10mm. nominal size] and admixture of water proofing compound as per manufacturer’s specification ..as directed(cost of water prppfing compound & polymer based paint to be paid separately.)
30
179
5393.4
... More
Providing and fixing of false ceiling with powder coated exposed G.I. grid suspension system (E-Grid U-1520 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c ) consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The Main Runners to be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X 600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm dia G.I. wire from purlins / soffit. 15mm thick OW Acoustic Board (Mineral Fiber Acoustic Ceiling Tiles) of approved patern and size 595mm X 595mm with NRC value 0.65 should be placed in the Grid module to form a False Ceiling. All complete as per the drawing & directions of Engineer-in-charge. In ground floor.a) Acoustic False Ceiling (with 15mm thick OW Acoustic Board and E-Grid U1520).
30
1370
41117.1
... More
Reducing Socket 200 mm X 250 mm
1
1523
1523.08
... More
Supplying, fitting & fixing M.S. clamps for door and window frame made of flat bifurcated with necessary screws etc. by cement concrete(4:2:1) as per direction. 40mm. x 6 mm. 250 mm. length.
40
29
1171.6
... More
Supplying, fitting and fixing anodized aluminum barrel / tower / socket bolt 225 mm. long & 10 mm. dia bolt of approved quality make from extruded section with conforming to I.S. 204/74 fitted and fixed with cadmium plated screws 225 mm. long & 10 mm. dia bolt.
30
84
2545.2
... More
Supplying, fitting and fixing plug of approved make conforming to I.S. specifications.75mm dia
1
131
131.3
... More
Supplying maruti lock (100mm)
80
46
3716.8
... More
iii) Shutter bottom rail
50
452
22624
... More
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
2000
24
48480
... More
Protective and decorative acrylic exterior emulsion paint of approved quality as per manufacturer`s specification and as per direction of EIC to be applied over acrylic primer as required. the rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer (G.Fl 2 coats) normal acrylic emulsionprimer 100% acrylic exterior emulsion paint of approved quality as per manufacturer’s specification. i)In ground floor
1500
84
127260
... More
Cleaning compound premises of shrubs,plants,jungles etc by cutting and removing as directed(specific permission of Engineer-in-Charge prior to execution will be necessary)(payment to be made on area cleared)
950
11
10554.5
... More
Supplying, fitting and fixing of steel cutter piece up to 450 mm long with sockets .75 mm dia.
1
407
407.03
... More
Earth work in filling in compound, tank, low land,ditches etc. with good earth, in layers not exceeding 150 mm. including breaking clods and consolidating the same by ramming and dressing complete. (Payment will be made on profile measurement before and after the work) With carried earth arranged by the contractor within a radius exceeding 3 km. but not exceeding 5 km. including cost of carried earth.
50
423
21189
... More
Supplying PVC rollers for sliding windows as per direction of Engineer in charge.
80
14
1131.2
... More
iv) Shutter lock rail
50
380
19038.5
... More
c) Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. ( in all floors for internal wall & upto 6 m height for external wall). 3 mm thick (weighing 7.4 Kg/ Sqm)
25
481
12044.25
... More
Applying acrylic emulsion paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (two coats) Luxury quality
1500
70
106050
... More
Labour for hoisting plastic water storage tank (i) upto 1500 Lt capacity
2
96
193.92
... More
d) Steel shuttering or 9 mm to 30 mm thick approved quality plyboard shuttering in any concrete. Ground floor
1600
366
586608
... More
(B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick
cement slurry at back side of tiles using cement @ 2.91
Kg/Sq.m & joint filling using white cement slurry @
0.20kg/Sq.m Area of each tile above 0.09 Sq.m Coloured decorative
80
1104
88395.2
... More
Supplying, fitting and fixing approved brand PVC connector white flexible with both end coupling with heavy brass CP nut 15 mm. Dia . 450 mm. long.
10
82
828.2
... More
Anti – termite treatment to the back filling of R.C.C. foundation with chemical emulsion by admixing chloropyfos emulsifiable concentrate (1% concentrate) with water by weight at the rate of7.5 lit per sq.m of the vertical surface of the substructure of earth side of the foundation. the work shall be carried out as per specification as described in para 6.3.1 of code IS-6313 (part-ii.. as per specification as described in para 6.3.1 of code I.S. 6313 (part –II) 1981.(mode of measurement will be per sq.m. of vertical area of foundation treated)
100
138
13837
... More
Collapsible gate with 40 x 40 mm. 6 mm. Tee as top and bottom guided rail 20 x 10 x 2 mm. vertical channels 100 mm. apart in fully stretched position 20x5 mm. M.S. flat as collapsible bracings properly riveted and washered including 38 mm. steel rollers including locking arrangement, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes chasing etc. in walls, floor etc. and making good damages complete in groung floor (Payment will be made on the area of the gate covered by two guard rails and two extreme channels)
15
4373
65599.5
... More
Supplying, fitting and fixing orrissa pattern – water closet in white glazed vitreous china ware of approved make in position complete excluding ‘D’ or ‘S’ trap 530 x 410 mm.
4
1537
6148.88
... More
Pumping out water from ponds or tanks
50
10
527
... More
(b) For Concealed Work CPVC Pipes Class-1, SDR-11 1. 15 mm dia.
40
141
5656
... More
Plain Y(a) 110 mm dia
15
225
3378.45
... More
Supplying bubble free float glass of approved make and brand. Conforming to IS:2835-1987 5mm thick clear glass .
30
531
15937.8
... More
Supplying, fitting & fixing granite slabs 15mm to 18 mm. thick with uniform texture & without decorative veins in columns, wall, facia,rise etc. with 15 mm thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all complete as per direction of the Engineer-in-charge including cost of all materials, labours, scaffolding, staging, curing and roughening of concrete surface complete. [Using cement slurry at back side of granite @ 4.4 kg/sq.m & white cement slurry for joint filling @ 1.8 kg/sq.m] In ground floor (a) Area of each Granite slab above 1.00 Square meter
10
3653
36531.7
... More
Plaster ( to wall, floor, ceiling etc.) with sans and cement mortar including rounding off or chamfering corners as directed and racking out joints including throating, nosing and drip course, scaffolding/ staging where necessary. i) With 1:6 cement mortar : a) 15mm. thick ( Gr. Floor)
1100
137
151096
... More
ii) 40 mm.
4
1662
6649.84
... More
Passover .110mm dia
5
411
2055.35
... More
Reinforcement for reinforced concrete in all sorts of structures work including distribution bars. Stirrups binders etc. initial straightening and removal of loose rust cutting to requisite length, hooking & bending to correct shape, placing in proper position and binding with 1.6 gauge black annealed wire at every intersection, complete as per drawing and direction.Tor steel / Mild steel. SAIL/ TATA/RINL a)For works in foundation, basement and upto roof of ground floor up to 4 m.
35
61037
2136306.55
... More
Applying interior grade acrylic primer of approved quality and surface old or new surface to receive distemper / acrylic emulsion paint including scraping and preparing the surface thoroughly. Water based interior grade acrylic primer.
1500
31
46665
... More
Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD -1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). With all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.)(a)80 mm
40
802
32118
... More
Supplying Weather Silicone sealant of approved make and brand for fixing of grove line between the Glasses as per direction of Engineer-incharge. for Structural Glazing/Curtain wall. Weather Silicone sealant for filling the Grove line between Glasses or any other material for facial work
5
57
287.85
... More
Washing and developing tube well with air compressor pump and engine for 8 hours continous pumping per day with necessary arrangement for testing the yield in gallons per hour with ‘V’ notch including hire and labour charges for all tools and plants and scaffolding as required complete in all respect.
1
7613
7613.38
... More
Neat cement punning about 1.5 mm. in wall dado window sills drain etc.
600
34
20604
... More
ii) Shoe - 110 mm. dia
15
112
1681.65
... More
Supplying, profiles of required section made of aluminum alloy extrusive confirming to I.S. 733-1983 and I.S. 1285-1975 anodised film thickness and specification colour/natural) matt finished confirming I.S. 1868-1983 for fabrication of composite door, sliding & casement windows, partitios, formed of basic sections of any ISI embossed/certified make and brand as per direction of Engineer-in -charge (payment will be made on finished length of the work). . A) In 10-12 micron thickness Anodizing film . . a) Fixed Partition (Unsupported length of vertical member upto 1.5 mtr. Height of both ends of vertical member restrained but panels within 0.9 sq.m.) i) Top , bottom & side member.
80
324
25936.8
... More
18 mm. thick marble partition slab with chawk doongri marble square cut, both side polished with two front corners rounded and edges polished fitted and fixed complete.
12
1440
17283.12
... More
Supplying, fitting and fixing anodized aluminum aldrop / sliding bolt of approved quality manufactured from extruded section confirming to I.S. specification (I.S. 2681/66) complete .250 mm. long by 16 dia bolt.
30
235
7059.9
... More
Sub frame for fixing Glass (Weight @0.31 Kg per Meter)
5
81
409.05
... More
Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three )nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade)Brushed/Mat finish, complete as per direction of the Engineer-incharge. Weight of Strainless Steel railing per metre 6.5 Kg(approx)
30
9167
275033.1
... More
M.S. or W.I. ornamental grill of approved design, joint continuously welded with M.S W.I flat sand bars for windows railing etc. fitted and fixed with necessary screws and hugs . up to 4th floor . Grill weighing above 10kg/m2 and upto 16kg/m2
30
10086
302602.5
... More
2. 20 mm dia.
10
144
1444.3
... More
Supplying ,fitting and fixing of Control panel No.(C& S CO. (Electrical contractor & Relay Type with both start and Run Capacitors.
1
3535
3535
... More
a) Supplying, fitting & fixing Cast iron soil pipe only conforming to I.S. 3989 /1970 and I.S. 1729/1964 with bobbins, nails etc. including making holes in the wall, floor etc. and cutting trenches etc. in any floor through masonry concrete, if necessary, and mending good damages with necessary jointing materials and painting two coats to the exposed surface with approved paint complete. (Measurement will be made along the center line of the total pipe line in fitted condition including specials,payment for specials & Painting will however be paid seperately).With valamoid joints including sealing with sand cement mortar (4:1) upto quarter depth 100 mm. (internal)
20
694
13897.6
... More
Bailing or pumping out water from foundation trenches.
50
21
1054.5
... More
Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling,15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20
mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary
reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.
i) With Pakur variety.
4
6759
27039.72
... More
Anti – termite treatment to the top surface of the consolidated earth within plinth walls with chemical cmulsion by admixing chloropyfos emulsifiable concentrate (1% concentrate) with water by weight at the rate of 5 litres per Sqm of the surface before sand bed or sub- grade is laid. holes upto 50 mm to 75 mm deep at 150 mm centre to centre both ways shall be made with 12 mm di mild steel rod on the surface to facilitate saturation of the soil carried out as per specification described in para 6.4 of code IS-6313(part-ii) 1981. ( mode of measurement will be per Sq.m. of plan area of plinth treated)
100
111
11110
... More
Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be madeon area of finished work) ,In roof a) With 0.5 mm thick sheet
20
904
18099.2
... More
Supplying, fitting, fixing G.I. Cap at top. 150 mm
1
508
508.03
... More
4. 40 mm dia.
100
407
40703
... More
150 mm
40
1854
74174.4
... More
Supplying, fitting and fixing white china best quality of approved make wash basin with C.I. brackets on 75 x 75 mm wooden blocks C.P.waste fittings of 32 mm. dia one of approved quality brass C.P. pillar cock of 15mm. ………..including mending good all damages and painting the brackets with two coats of approved paints. 550 x 400 mm. size.
6
2230
13380.48
... More
Supplying, fitting and fixing 10 liter PVC low down cistern conforming to I.S. specification with PVC fittings complete C.I. brackets including two coats of painting to bracket etc.
4
1025
4100.6
... More
Applying exterior grade acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured ( matt finish ) or smooth finish acrylic exterior emulsion paint including scraping and preparation the surface thoroughly complete as per manufacturer`s specification and as per direction of the EIC. G.Fl.
1500
31
47565
... More
Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-in-charge including cost of all materials labour and equipment complete.
2
2049
4098.58
... More
Supplying, fitting and fixing porcelin soap tray of approved make. (i) Recessed soap tray of size 150 mm. X 150 mm.
6
341
2048.28
... More
(D) Partly glazed and partly panelled partition or fixed glazing made of
extruded and anodised alloy aluminium sections, fabrications after
cutting to proper shape and size, drilling and aligning fitted with inbuilt
locking arrangement cutting the glass / board (prelaminated / particle /
block) to requisite shape and size moulding the edges fitted and fixed
glazing clips and dry set neoprine /EPDM gasket, along with all other
necessary arrangements for fixing the partition to walls, floors, beams,
columns polysulphide sealant for water proofing if necessary complete in
all respect as per drawing and specifications and direction of the
Engineer in charge.The rate includes the hire charge of all tools and plants, adhesive,
joineries such as screw, fastener but excluding the cost of extruded
aluminium sections, EPDM gasket, glass, board, glazing clips, locking
arrangement, etc. For partitions using section of size: a) 63.50 mm x 38.10 mm
75
735
55146
... More
weather gasket / wool pile for door vertical
300
19
5757
... More
150 mm dia.boring etc.top enlargement
40
691
27674
... More
Supplying galvanised staples fitted and fixed complete. 44 mm. to 50 mm. size
50
3
177.5
... More
Supplying, fitting and fixing approved brand 32 mm. dia PVC waste pipe, with PVC coupling at one end fitted with necessary clamps.750 mm. long.
10
59
595.9
... More
b) up to 4th floort.
5
349
1747.3
... More
c) 20mm. thick ( Gr. Floor)
3200
156
500960
... More
Supplying, fitting and fixing approved brand 32 mm. dia PVC waste pipe, with PVC coupling at one end fitted with necessary clamps.900 mm. long.
4
75
303
... More
Supplying solid flush type doors of commercial quality the timber frame consisting of top and bottom rails and side style of well seasoned timber 6.5 cm wide each and the entire frame fitted with 37.5 mm. wide battens places both ways in order to make the door of soild core, internal lapping gurjan or similar wood veneers using phenol formaldehyde as gluee etc. complete including fitting and fixing the shutter in position but excluding the cost of hinges and other fittings in groung floor. 32 mm thick shutters ( single leaf)
5
2382
11912.95
... More
Double socked 3meter.length.110mm
10
318
3181.5
... More
Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials.For 50 users
A) With Pakur variety.TATA/SAIL/RINL
1
91168
91168.66
... More
Supplying fitting and fixing MS socket ring 1. 100 mm
1
109
109.08
... More
Providing and fixing at or near ground level precast cement concrete in kerbs (size: 410 mm x 310 mm x width 150 mm at bottom with circular nosing at top) (Nano kerb) of cement concreat M25 Grade without reinforcement, fixing as per approved pattern and setting in position at site after preparing the bed grade and slopes by laying Cement concrete with jhama khoa (1:4:8) as per specification and direction of Engineer-inCharge including filling of joints with 10 mm thick cement morter (3:1) and back filling the vertical piece properly with earth duly compacted and curing the morter joints for atleast 3 days including cost and carriage of all materials complete
5
953
4767.2
... More
Door Bend (LH) & (RH).110mm dia
10
286
2868.4
... More
Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement
plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside
dia.
1
15551
15551.98
... More
Supplying, fitting and fixing Godrej mortice lock (local best approved quality ) 6 lever with handle connected rods and keys crossing a with chromium plated handle.
30
1973
59206.2
... More
Supplying, fitting and fixing stainless steel sink complete with waste fittings on C.I. brackets including two coats painting of brackets sink only 540 x 430 x 180 mm.
6
3317
19907.1
... More
Bend 87.5 degree (a) 110mm dia
20
141
2828
... More
b) On steel or other metal surface with super gloss (hi-gloss) 2 coats (with any shade except white)
300
79
23937
... More
iii) Two point nose steel handle including fitting and fixing.
30
50
1515
... More
v) Centre hung ventilator as per I.S. sizes 58 cm.
15
483
7256.85
... More
3. 25 mm dia.
10
237
2373.5
... More
Supplying, fitting and fixing fan hook for ceiling with 1mtr. Long 16mm. dia. For complete including mending damages.
30
101
3030
... More
b) Depth of excavation for additional depth beyond 1500 mm, and upto 3000mm. But not requiring sharing.
500
194
97150
... More
Single brick flat soling or picked jhama bricks including ramming and dressing bed to proper leveling and filling joint with power earth or local sand including cost of sand or earth.
200
327
65448
... More
b) 3- track sliding window
i) Bottom frame
50
355
17776
... More
3. 25 mm dia.
10
210
2100.8
... More
M.S. or W.I. ornamental grill of approved design, joint continuously welded with M.S W.I flat sand bars for windows railing etc. fitted and fixed with necessary screws and hugs in ground floor. . Grill weighing above 10kg/m2 and upto 16kg/m2
10
9986
99868.8
... More
Supplying, fitting and fixing best quality Indian make mirror 5.5 mm. thick with silvering approved quality as per I.S.I. specification supported on fiber glass freme of any colour frame size 600 x 450 mm. complete in all respect as per direction of engineer-in-charge.
6
488
2933.04
... More
Supplying, fitting and fixing peets valve full way gun metal standard pattern best quality of approved brand with fittings. i) 25 mm.
1
921
921.12
... More
2. 20 mm dia.
10
172
1727.1
... More
c) Shutter for all track sliding window. iii) Interlock member.
80
162
13008.8
... More
Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. (a) In ground floor including roof.
25
1975
49389
... More
b) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality, including smoothening surface by sand papering etc
300
29
8787
... More
up to 4th floor
1000
911
911020
... More
Supplying, fitting and fixing C.P. stop / bib cock.i) Chromium plated bib cock short body.
12
544
6532.68
... More
a)Filling in foundation or plinth by fine sand in layer not exceeding 15 cm. as directed and consolidating same by through saturation with water and ramming complete, including the cost of supply of sand. Do by fine sand
900
647
582543
... More
Brick work with 1st class bricks in cement mortar (1:6) (a) In foundation and plinth
40
4860
194404.8
... More
Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units (A) Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sectios, fabrications, including cutting to proper shape and size, drilling and aligning of window shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joineries along with extruded neoprine or EPDM gasketing in between window frame and masonry work (walls, column, beam.lintels etc.) as well as between glass and shutter frame for fixing glass and Polysulphide sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of EIC. The rate includes the hire charge of all tools and plants, including all incidental charges, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded aluminium sections, glass, neoprene / EPDM gasket, locking arrangement and rollers. i ) 2 track sliding window.
15
702
10544.4
... More
Supplying bubble free float glass of approved make and brand
conforming to IS: 2835-1987 5mm thick clear glass.
150
531
79689
... More
Door Y (LH) & (RH),110mm dia
10
278
2787.6
... More
Supplying galvanised straining bolts (with eye at one end with double nuts and washers) fitted and fixed complete. 12 mm. dia. 250mm long
10
74
747.4
... More
Anti – termite treatment to bottom surface (in case of masonry foundation and basement) and the sides (upto height of 300mm from bottom) of the excavation trenches with chemical emulision by admixing chloropyrofos emulsiflable concentrates (1% concentration) with water by weight at the rate of 5 litres per Sqm area . the work shall be carried out as per specification described in 6.2.1 of code IS-6313 (part-ii) 1981 (mode of measurement will be the plan area of foundation treated)
100
93
9393
... More
b) In superstructure Gr. Floor
70
5085
355974.5
... More
Supplying, fitting and fixing C.I. approved patent vent cowl confirming to ISS 1729 of 1970 supplied fitted and fixed in position cpmplete with load caulked jointing.100 mm. dia.
6
314
1884.66
... More
Collecting sample of water for bacteriological and chemical test for any depth at any time during execution of work including hire and labour charges for tools and plants and sterilization of equipments paying all charges and fees of testing, etc. complete in all respect as per direction.
1
1243
1243.31
... More
Supplying concealed type PVC headed aluminum tower bolt for double leaf doors as per approved make. 300 mm long
30
74
2242.2
... More
Door Tee (LH) & (RH),110mm dia
10
315
3151.2
... More
c) Shutter for all track sliding window. ii) Style side member.
80
129
10342.4
... More
Supplying, fitting and fixing anodized aluminum ‘D’ type handle of approved quality manufactured from extruded section confirming to I.S. specification (I.S. 230/72) complete with contibuous plate base. 100 mm. grip x 10 mm. dia rod.
30
69
2090.7
... More
Supplying & laying interlocking 60mm thick designer paver block(M-35) of anyshade and of approved quality as per IS: 1237-1980 laid in pattern as directed in pavement, footpath, driveway, etc including necessary underlay complete in all respect with all labour and material.[Border concrete if necessary to be paid separately]. (b)40 mm thick block (over 150 mm medium sand bed including cost of sand but excluding cost of earthwork in excavation or dismantling of existing hard surface if necessary) (ii) Coloured Decorative
10
1329
13291.6
... More
Supplying, fitting galvanised 3 ply 12 gauge / 4 points line of barbed wire in fencing (holes already made in the body of the post) or fixed by staples tightening and fixing the wires in taut condition with straining bolts including the cost of cutting and of lapping joints in the wire as necessary but excluding the cost of galvanised staples,straining bolt and binding wire where necessary.
5
27
139.8
... More
Glass shelves with aluminium guard rails size 600 x 125 mm. with 505 mm. thick glass.
6
484
2908.8
... More
ii) H.C.I bend with door 100 mm. dia.
15
548
8226.45
... More
Supplying concealed type heavy duty hydraulic double action floor spring along with top / pin set of pivots conforming to IS: 6315 or any approved make as per direction of Engineer in charge..
25
1746
43657.25
... More
Labour charge for fabrication and installation of structural Glazing/Curtain Wall made from annodized extruded allooy aluminium sections for the following units:- Structural Glazing made of extruded and annodized alloy aluminium sections, fabrications including cutting to proper shape and size, drilling including cost of brackets, fastener bolt, mullion bolt, nuts & washers, maskin tape, double side adhesieve crosslink foam (used for guard of glazed silicon on sub-frame), tissue paper foam (used as filler between sub-frame and under backing of weather silicon), screws and other necessary hardwares, fixing of glass as per drawing, specification and direction of Engineer-in-Charge. (The rate includes hire charges of all tools and plants, including all incidental charges, adhesieve, joiners such as screw,cleate angle,etc. but excluded the cost of extruded aluminium sections, glass, glazed silicon, weather silicon etc.)
5
858
4292.5
... More
Providing and fixing acid proof tiles of size 150mmx150mmx20mm/25mm thick in floor and dado conforming to IS 4457 as per drawing with a base coat of mastic bitumenous primmer followed by 6mm thick bitumen mastic layer base morter, 6/7mm thick sodium silicate morter (as per IS 4832 part-I), tiles will be laid in the green stage, all the joints will be scrapt off, latter all the joints will be filled with epoxy resine morter. The joints between two tiles shall not exceed 6mm.
170
856
145601.6
... More
Hire and labour charges for shoring work (including necessary close plank walling, framing, Eucalyptus/Jhou bulla piling, strutting etc) complete as per direction of the Engineer-in-charge for foundation excavation (vertical surface are in contact with supported earth is to be measured.) (This item should be executed on specific direction of the Enginner in charge). (a) Depth upto 1.5 m. .
200
379
75952
... More
Cement washing including cleaning and smoothening surface thoroughly external surface one coat.
1500
9
13860
... More
125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.
150
670
100596
... More
vi) Glazing clip
500
50
25250
... More
a) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality, including smoothening surface by sand papering etc.
50
38
1919
... More
ii) Top and side frame.
50
220
11009
... More
(a)Ordinary cement concrete (mix 1:1:5:3) with graded stone chips (20 mm. nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes, Pakur variety.
300
5552
1665627
... More
Band molding ( horizontal or vertical) of rectangular section, made with cement plaster 1:4 complete at ground floor.Projection upto 7.5 cm. depth or width 75 to 150 mm. (cement 2.46 kg/mts.)
200
58
11716
... More
iv) Aluminium peg stay 300 mm. long including fitting and fixing.
30
59
1787.7
... More
b) up to 4tht floor
2000
128
256540
... More
ii)Open-able steel windows as per I.S.sizes with side hung shutters.
30
2220
66629.7
... More
ii) With 1:4 cement mortar : a) 10mm. thick ( Gr. Floor) for ceiling bottom of chujja, beam etc.
800
124
99384
... More
125 mm. long wooden buffer block fitted and fixed complete with necessary screws teak.
15
57
863.55
... More
ii) Intermediate member.
30
342
10271.7
... More
Supplying bubble free float glass of approved make and brand
conforming to IS: 2835-1987; (A) coloured, toughened glass conforming to IS: 2553-1992 (part-II):6mm
30
1083
32511.9
... More
d) 20mm. thick ( up to 4th floor)
3200
160
513888
... More
Supplying T' shaped EPDM gasket of approved make and brand as per direction of EIC.
300
13
3939
... More
Supplying , fitting and fixing of heavy type bell mouth reducing socket 75 mm X 150 mm .
1
622
622.16
... More
ii) Top and side frame.
50
309
15453
... More
Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP) 4mm thick (0.50mm Al.+3.0mm LDPE +0.50mm Al. PVDF coating)
5
2906
14533.9
... More
125mm. thick Flyash brick work asper IS12894:2002 in cement mortar (1:4) in ground floor.
10
584
5847.9
... More
Supplying, fitting and fixing flat back urinal in white vitreous china ware of approved make in position with brass screws on 75 x 75 x 75 mm. wooden blocks complete. 470 x 280 x 340 mm.
4
954
3817.8
... More
Labour charges for fabrication and installation of composite door window, partition made from anodized extended alloy aluminum sections. For the following units:- fully glazed single leaf reamless swing door made of anodised aluminium alloy extrusions fabrication after cutting to proper shape and size, drilling and aligning fitted with heavy duty hydrolic action floor spring with top pin assembly and fitted with inbuilt locking arrangement and all other necessary fittings, fixture, adhesives and joineries, cutting the glass to requisite shape and size mounting the edges for fitting the same with dry set neoprine / EPDM gasket
75
1293
97035.75
... More
Supplying and laying true to line and level High Grip, Scratch resistant,
Neutral to UV rays, Full Body Vitrified Tiles conforming to IS:15622-2006 &
IS 4457-2007 and tested in accordance with IS:13630 [Non- modular sizes for
tiles with Skid resistance: 0.6, Mohr's hardness 7.0, Staining resistance: Class1, Water Absorption E 0.5%] & MOR 35N/sq.mm and Breaking strength 1500 N for Outdoor area of building e. g. Gang-way, Corridor, Driveway,
Parking lots, Courtyards, Sloping ramps, Entrance lobbies, Patios, Portico etc.
set over necessary underlay and 2 mm thick cement slurry at back side of tiles
using cement @ 2.91 Kg./Sqm, joints grouted with admixture of white cement
and colouring pigment to match with colour of tiles and removal of wax coating
of top surface of tiles with warm water and cleaning the tiles using soft and dry
cloth complete including the cost of materials, labour and all other incidental
charges complete including backside slurry but excluding the cost of underlay
and true to the manufacturer's specification and direction of Engineer-inCharge. In Ground Floor: Sizes-300 mm x 300 mm x10 mm
20
792
15857
... More
b)Earth work in filling in foundation trenches or plinth with good earth in layers not exceeding 150 mm including watering and ramming etc layer by layer complete (Payment to be made on the basis of measurement of finished quantity of work) i)With earth obtained from exavation of foundation.
1300
78
101816
... More
(b) For additional depth beyond 1.5 m. and upto 3.00 m
100
433
43329
... More
Supplying , fitting, fixing in position Submersible pump 1.5 H.P. of K.S.B. make,stage 18, 220 volt submersible motor pump model No.KSB CORA 75 37C (Single phase)
1
16946
16946.79
... More
up to 4th floor
350
680
238259
... More
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (A)Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick
cement slurry at back side of tiles using cement @ 2.91
Kg/Sq.m & joint filling using white cement slurry @
0.20kg/Sq.m. Area of each tile above 0.09 Sq.m Coloured decorative. Ground floor
500
905
452985
... More
Supplying profiles of required section made of Aluminium Alloy Extrusion conforming to IS: 732-1983 and IS: 1285-1975; Anodised with required film thickness and specified colour/natural matt finished conforming to
IS: 1868-1983 for fabrication of Structural Glazing, Curtain Wall formed of basic sections of any ISI embossed/certified make and brand as per direction of Engineer-in-charge. ( Payment will be made on finished length of the work). 15 micron colour anodising Structural glazing /Curtain Wall. Mulion & Transom (Weight @1.819 Kg per Meter)
5
467
2338.15
... More
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc.complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(i)50 mm
30
387
11635.2
... More
Supplying, fitting and fixing steel window and ventilators with or without integrated grills conforming to IS 1038-1975 as per drawing and manufactured from rolled steel section conforming to Is 7452-1974 with non-friction projecting type, box type hinges glazing blips, lung locking brackt, handle plate etc. including hoisting in position, straightering reguired, fixing lugs in cement concrete (1:2:4) with stone chips 20 mm. down cutting holes and mending good damages to match with existing surface complete in all respect excluding glaxing in ground floor, flash butt welded windows and ventilators. . a) Without integrated grill. i) Fixed type steel window as per I.S sizes with horizontal glazing bars.
10
1523
15230.8
... More
10mm thick
50
2182
109130.5
... More
Double Y with door 110mm dia
10
348
3484.5
... More
Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). (When the height of a particular floor is more than 4 m. the equivalent floor ht. shall be taken as 4 m. and extra for works beyond the initial 4 m. ht. shall be allowed under 12(e) for every 4 m. or part thereof.) (Mode of measurement : Area in plan X mean height of staging upto soffit of shuttering above initial 4 m.) a) 25mm. to 30mm. thick wooden shuttering.
5
331
1656.4
... More
ii ) Louvered window.
20
737
14746
... More
Supplying, fitting and fixing pedestal of approved make for wash basin (white)
4
1511
6047.88
... More
c) In superstructure up to 4th Floor
150
5197
779619
... More
Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In groung floor including roof. (a) upto 150 mm. thick .
25
948
23709.75
... More
Earth work n in excavation of foundation trenches of drain or septic tank, soak well etc. in all sorts of soil including removing, spreading or stacking the spoils within a lead of 75 mtr. or as directed and including trimming the sides of trenches, leveling, dressing and ramming the bottom bailing or pumping out water etc. as required complete.a) Depth of excavation not exceeding 1500mm.
800
120
96368
... More
Artificial stone in floor, dado, straicase etc. with cement concrete (1:2:4) with stone chips laid in panel as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m. All complete including all materials and labour in ground floor. 3mm. thick topping using grey cement. 35 mm
10
326
3262.3
... More
75 mm Thick brick work with 1st class bricks in cement mortar (1:4) in ground floor using approved H.B. netting in every alternate layer.
5
464
2323
... More
Supplying, fitting and fixing UPVC pipes A-type and fittings conforming to IS : 13592-1992 with all necessary clamps, nails, including making holes in wall, floor etc. cutting trenches in any soil, thorough masonry concrete structure etc. . UPVC pipes. i) 110 mm. dia
120
253
30421.2
... More
Supplying, fitting and fixing in position approved PVC door frame made of extruded PVC multichamber hallow section having dimensions 60mm. x 50 mm. x 2 mm.(+0.2mm.), horizontal section by galvanized steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges, one steel tube 40mm. x 20mm. x 1.2mm. will be inserted on one full vertical side of the frame as reinforcement the frame will then be fixed in the opering with the help of PVC expandable fastener wooden gutties and galvanished steel screws including cost of all materials and labour hire charges of all materials, taxes and all other incidental charges complete.
30
281
8453.7
... More
Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. (a) For Exposed Work CPVC Pipes Class-1, SDR-11 1. 15 mm dia.
30
107
3211.8
... More
Cross Tee with door.110mm dia
5
241
1206.95
... More
Supplying, fitting and fixing allumium approved brand towel rail 25 mm. dia 450 mm. long with two brackets complete all respect as per direction of engineer-in-charge.
10
143
1434.2
... More
Door stopper (Brass)
15
118
1772.55
... More
18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer - in -charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m]
50
1014
50702
... More
ii) Shutter top rail
50
307
15352
... More
Dismantling all types of masonry excepting cement concrete plain or reinforced. Stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. (a) In ground floor including roof.
30
451
13544.1
... More
Oxidised iron butt hinges of approved quality fitted and fixed with steel screw with ISI mark. 100 x 58 x 1.90 mm. (Oxidised)
50
61
3085.5
... More
Collapsible gate with 40 x 40 mm. 6 mm. Tee as top and bottom guided rail 20 x 10 x 2 mm. vertical channels 100 mm. apart in fully stretched position 20x5 mm. M.S. flat as collapsible bracings properly riveted and washered including 38 mm. steel rollers including locking arrangement, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes chasing etc. in walls, floor etc. and making good damages complete in up to 4th floor (Payment will be made on the area of the gate covered by two guard rails and two extreme channels)
20
4417
88340.6
... More
125 mm Thick brick work with 1st class bricks in cement mortar (1:4) in ground floor using approved H.B. netting in every third layer.
5
712
3560.25
... More
Supplying fitting and fixing GI cap at top 1. 100 mm
1
140
140.39
... More
up to 4th floor
150
1109
166498.5
... More
Supplying& laying 20 mm designer chequered tiles of any shade and of approved quality as per IS: 1237: 1980 laid in patterns as directed in pavement, footpath including necessary underlay 25 mm thick average cement mortar (1:3) complete in all respect with all labour and materials [using cement slurry @ 4.4 kg/Sq.m at back side of tiles. Cement of mortar & slurry will be supplied by the Department. Border concrete if necessary to be paid separately].
100
822
82214
... More
iii) H.C.I heal rest bend 100 mm. dia
15
555
8332.5
... More
c) 25mm. to 30mm. shuttering without staging in foundation.
100
207
20705
... More
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992.(i) Single Socketed 3 Meter Length.110mm dia
30
294
8847.6
... More
Supplying ‘U’ shaped EPDM gasket of approved make and brand and brand as per direction of EIC.
50
15
757.5
... More
Supplying, fitting and fixing P.V.C door shutter of approved quality and shade in position, the style & rail of the PVC door shutter will be made of rigid PVC multicavity hollow chamber of 50mm. x 30mm. section with 2.0 mm.(+0.2mm.) wall thickness horizontal & vertical section shall be fixed to each other by self tapping screws and one solid ..tools and plants and appliances carriage of all materials, taxes and all other incidental charges complete. The rate is exclusive of cost of hinges, hasp bolt, tower bolt, door ring etc.P.V.C door shutter 30mm. thick :
30
2148
64448.1
... More
Ordinary cement concrete (mix 1:2:4) with graded stone chips (20 mm. nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes Pakur variety
1
4977
4977.3
... More
Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mm thickness in floor, lobby, stair, landing & treads etc. over 20 mm (av.) thck base of Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/Sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/Sq.m with necessary pigments including grinding and Granite polishing as per direction of Engineering -in -Charge in Ground Floor. {White cement and Pigment to be supplied by the Agency](iii) Area of each Slab/tile exceeding 0.60 sq.m but not exceeding 1.00 sq.m.
150
1924
288607.5
... More
Washing and development tube well with air compressor pump and engine for 8 (eight) hours continuos pumping per day with necessary arrangement for testing the yield in gallons per hour with 'V' notch including hire and labour charges for all tools and plants and scaffolding as required.
1
7613
7613.38
... More
c) Shutter for all track sliding window. i) Bottom & Top member.
50
132
6615.5
... More
Wood work in door and window frame in fitted and fixed in position complete including a protective coat of painting at contact surface of the frame excluding cost of concrete, iron butt hings and M.S. clams sal (siliguri)
5
88094
440471.1
... More
Supplying, fitting and fixing approved quality PVC. water storage tank with closed up with lid ( Black) Multilayer top cover 1000 liter capacity.
2
5179
10358.56
... More
Labour for chipping of concrete surface before taking up plastering work.
2000.13
21
42422.76
... More
Supplying, fitting and fixing 100 mm. C.I. round gratings (heavy type)
10
62
626.2
... More
Supplying, fitting and fixing Godrej mortice lock chromium plated with latch and keys 4 levers, including fitting and fixing complete
30
1091
32754.3
... More
Supplying, fitting , fixing 2.5 mm sq. flat P.V.C submersible cabble (Finolex / Havels make) as per direction of the Engineer in charge.
50
111
5555
... More
b)Supplying, fitting and fixing of following specials with valamoid joints including sealing the top with cement mortar (4:1) i) Cast iron single branch 100 mm. dia.
15
801
12029.1
... More
Supplying, fitting and fixing cast iron ‘P’ or ‘S’ trap conforming to IS 3989/1970 and 1729/1964 including lead caulked joints sand painting two coats to the exposed surface. 100 mm. ‘P’ trap.
20
957
19149.6
... More
Packing the annular space between the outside of the housing pipes and the bore with puddleballs of approved by the direction of the Engineer-in-charge including cost of all materials and labour complete.
1
421
421.17
... More
ii ) 3 /4 track sliding window.
50
950
47520.5
... More
d) Steel shuttering or 9 mm to 30 mm thick approved quality plyboard shuttering in any concrete. Up to 4th floor
3200
384
1231392
... More
b) 15mm. thick ( up to 4th floor)
3200
141
452480
... More
Supplying high density polythene strainer of approved make with adopter conforming to I.S.Specification .(i) 80 mm dia.
20
828
16564
... More
ii) Chromium plated stop cock
10
497
4979.3
... More
Cement concrete with graded stone ballast (40mm. size) cxcluding shuttering.1:3:6 proportion) Pakur variety
80
4878
390264
... More
v) Door vertical
50
335
16766
... More
iii) Tee - 110 mm dia
50
173
8686
... More
Supplying, fitting and fixing shower of approved brand and make.Chromium plated round shower with revolving joint.
4
456
1826.08
... More
Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick).
1500
123
184830
... More
up to 4th floor :
36
61080
2198907.36
... More
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary. a) On timber or plastered surface with super gloss(hi-gloss) On timber or plastered surface with super gloss(hi-gloss) 2 coats (any shade except white)
50
81
4090.5
... More
M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-in- charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1956 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 1957, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. including handling charges of materials for the work complete. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc.and no seperate payment being made for these items, as per direction of Engineer In Charge. For structural members of specified sections weighing less than 22.5 Kg./m
1
73329
73329.03
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Purba Bardhaman, West Bengal