West Bengal State Electricity Distribution Company Limited Tender
... More
The WBSEDCL has issued a formal invitation for competitive bids for the West Bengal State Electricity Distribution Company Limited project, for Construction Of 01 No Ptr Plinth, Ct, Pt, Vcb Foundation Plinth, 01 No Cable Frame Supporting Structure Foundation Plinth, Cable Trench, Operational Slabs, Concreting Near 11kv Isolator Structure And Extended Portion Of Switchyard, in Birbhum, West Bengal, with an estimated contract value of Rs. 1,93,791. The bid opening date for this tender is 10-06-2025 and the last date for bid submission is 24-06-2025. Interested bidders for West Bengal State Electricity Distribution Company Limited tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
West Bengal State Electricity Distribution Company Limited - WBSEDCL Tender
Civil And Construction
Electrical and Electronics
Electrical Works
Eprocure
Opening Date10 Jun 2025
Closing Date24 Jun 2025
Tender Amount₹ 1,93,791.84
Costs
EMD
₹ 30,973Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Construction Of 01 No Ptr Plinth, Ct, Pt, Vcb Foundation Plinth, 01 No Cable Frame Supporting Structure Foundation Plinth, Cable Trench, Operational Slabs, Concreting Near 11kv Isolator Structure And Extended Portion Of Switchyard,
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_WBSED_861134_1Tender No
RM/BRO/Civil/e-NIT/2025-26/03 Dtd.09.06.2025Tender Authority
West Bengal State Electricity Distribution Company Limited ViewPurchaser Address
-Website
http://https://wbtenders.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. (a) In ground floor including roof.
2.5
1975
-
... More
Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge
10
167
-
... More
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil butexcluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75m. as directed. The item includes necessary trimmingthe sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1,500 mm.
95
120
-
... More
Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) With earth obtained from excavation of foundation.
31.67
78
-
... More
(ii) With carried earth arranged by the contractor within a radius of 3 km. including cost of carried earth.
45
358
-
... More
Filling in foundation or plinth by Fine Sand in layers not exceeding 150 mm. as directed and consolidating same by thorough saturation with water ramming complete, including the cost of supply of sand. (Payment to be made on measurement of finished quantity)
50
578
-
... More
Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand.
525
268
-
... More
(I) Cement concrete with graded stone ballast (40 mm size excluding shuttering) In ground floor (A) [Pakur Variety] 1:3:6 proportion
55
4275
-
... More
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. a) Pakur Variety
0.5
4418
-
... More
Ordinary Cement Concrete( mix.1:1.5:3) with graded stone chips(20 mm.nominal size) excluding shuttering and reinforcement, if any, in ground floor,as per relevant I.S.Codes,Pakur variety.
22
4939
-
... More
Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (upto roof of ground floor). (b) 25 mm. to 30 mm. thick wooden shuttering without staging in foundation.
155
207
-
... More
(a) 25 mm. to 30 mm. thick wooden shuttering as per decision & direction of Engineer-in-charge.
20
331
-
... More
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. For works in foundation, basement, and upto roof of ground floor / upto 4m. (i) Tor steel/Mild Steel . I. SAIL/TATA/RINL
2.1
61037
-
... More
Brick work with 1st class bricks in cement mortar (6:1) (a) In foundation and plinth
10
4285
-
... More
125 mm. thick brick work with 1st class bricks in cement mortar (4:1) in G.Floor.
35
597
-
... More
Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a
lead of 75m as directed.
10
19
-
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (a) With 6:1 cement mortar 20 mm. thick plaster
15
154
-
... More
15 mm. thick plaster
55
136
-
... More
(b) With 4:1 cement morter. 10mm thick plaster
15
123
-
... More
Neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc.
10
34
-
... More
Scraping of moss, blisters etc.thoroughly from exterior surface of walls necessitating the use of scraper, wire brush etc.(Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge)
20
7
-
... More
Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick).
5
123
-
... More
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC (a) One Coats
50
3171
-
... More
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.In Ground floor (Two Coat). a) Normal Acrylic Emulsion
50
67
-
... More
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor)i) Solvent based interior grade Acrylic Primer
40
3110
-
... More
Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) i) Standard Quality
40
62
-
... More
Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
7.5
38
-
... More
Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
45
29
-
... More
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On timber or plastered surface :With super gloss (hi-gloss) - Two coats (with any shade except white)
7.5
81
-
... More
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : On steel or other metal surface :With super gloss (hi-gloss) - Two coats (white in shade)
45
79
-
... More
Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc. (a) With 'P' trap (with vent)
1
3135
-
... More
(f) Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar).
1
1263
-
... More
(g) PTMT overhead shower ( Prayag or equivalent) (ii) 150 mm round
1
343
-
... More
Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.
1
1025
-
... More
Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. i) Polythene Flush Pipe
2
156
-
... More
Dismantling urinal.
2
33
-
... More
Renewing 15 mm C.P. over brass spreader.
1
297
-
... More
Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. (ii) 470 mm X 280 mm X 340 mm
2
954
-
... More
Supplying, fitting and fixing stainless steel sink complete with waste
fittings and two coats of painting of C.I. brackets.
(a) Sink only (i) 530 mm X 430 mm x 180 mm
1
3317
-
... More
Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. (ii) 550 mm X 400 mm size
1
2230
-
... More
Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.
A) UPVC Pipes: (ii) 110 mm. Dia.
3
253
-
... More
B) UPVC Fittings: c) Bend 87.5 degree (ii) 110 mm. Dia
3
161
-
... More
d) Shoe ii) 110 mm. Dia
3
112
-
... More
xv) Vent Cowl ii) 110 mm. Dia
3
33
-
... More
PVC Door Shutter-30 mm thick:Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of 59 mm x30 mm section with 2.0 mm (+/-0.2 mm) wall thickness.Horizontal& vertical section shall be fixed to each other by self tapping screws and 1 solid polymeric or M.S. galvanised tubular 'L' shaped bracket 100mm x 200mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 120 mm x30mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle, reinforced by solid polymer bar of 200 mm long at both ends and screws from both sides as lock rail. The section frame will then be fitted in by PVC panels of size 100 mmx25 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliancesi/c carriage of all materials taxes and all other incidental charges complete.
8.5
2148
-
... More
Supplying fitting and fixing in position approved P.V.C. door frame (Matt finish) made of extruded P.V.C. multichamber hollow section having dimensions 60mm x 50mm x 2mm (+/-0.2mm), horizontal section will be joined with vertical section by galvanised steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges, one steel tube 40mm x 20mm x 1.20 mm will be inserted on one full vertical side of the frame (hinge side) as reinforcement, the frame will then be fixed in the opening with the help of P.V.C. expandable fastner/wooden gutties and galvanised steel screws including cost of all materials and labour, hire charges of tools and appliances, carriage of all materials, taxes and all other incidental charges complete.
10.5
281
-
... More
Reparing collapsible gate by cutting out all rivets as necessary reassambling all members including welding pieces of channels, sraightening bent bars and rivetting with new rivets and fitting in position and painting two coats.
6.3
382
-
... More
Easing and oiling, cleaning collapsible gate and repairing to locking arrangements.
6.3
17
-
... More
Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracigs properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete,in G.Floor.(Payment will be made on the area of the gate covered by two guard rails and two extreme channels)
15
4373
-
... More
Labour for taking out rolling shutter (only shutter portion) dismantling by parts for repair or (replacement of damaged parts only), rehanging and refitting the same in position after necessary repairs (excluding the cost of supply of new parts).
7.5
285
-
... More
Oiling and greasing of rolling shutter and repair to in side lock.
7.5
73
-
... More
Taking out carefully from shutter existing broken glass panes, cutting the same to smaller and utilising the same, small pane including cost of fitting and fixing. (a) Putty and Nails
2
18
-
... More
Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall)
(i) 3 mm thick (weighing 7.4 kg/Sq.m)
3.5
481
-
... More
Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987.iii) 5mm thick clear glass
2.5
531
-
... More
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
50
24
-
... More
Taking out Mirzapur or glazed porcelain tiles carefully by chiselling from walls or floor including stacking serviceable material as directed.
65
107
-
... More
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc (A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m (a) Area of each tile upto 0.09 Sq.m
(i) Coloured decorative
15
737
-
... More
(B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m& joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative
45
744
-
... More
Labour for boring through any type of soil for sinking tube well of
required dia. with top enlargement by rig boring system (either by reserve circulation or by direct rotary method) including hire charges and labour for rig machine, tools and plants, staging, force pumping set and making arrangement for water required for boring etc. complete and lowering of pipes, strainers, blind pipes etc. complete.(a)(a) For depth upto 250 metre for 100 mm dia. Tube well with top enlargement of 200 mm dia.(upto 50 metre). First 50 metre
50
1024
-
... More
Next 50 metre
50
891
-
... More
Next 50 metre
15
1065
-
... More
Supplying high density polythene strainer of approved make with adapter conforming to I.S. specifications.100 mm dia
18.5
1332
-
... More
Supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets. (ii) 50 mm dia
1
190
-
... More
Supplying, fitting and fixing G.I. cap at top (i) 100 mm
1
140
-
... More
Supplying, fitting and fixing M.S socket ring (i) 100 mm
1
109
-
... More
Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with 'V' notch including hire and labour charges for all tools and plants and scaffolding as required.
3
7613
-
... More
Collecting sample of water for bacteriological and chemical test from any depth at any time during execution of work including hire and labour charges for tools and plants and sterilising the equipments, paying all charges and fees, testing etc. complete in all respect as per direction.
1
1243
-
... More
Geophysical investigation of the acquifer by electrologging system with all tools and plants as necessary including supply of necessary report.
1
8356
-
... More
Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-incharge including cost of all materials labour and equipment complete.Note: Initial 6 m. of Annular space between the housing pipe and the bore should not be shrouded with Pea size gravel to avoid contamination with surface water.
2.8
2049
-
... More
(e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mm
4
155
-
... More
b) PTMT Pillar Cock - 15 mm. (Prayag or equivalent).
2
224
-
... More
(a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand).
1
544
-
... More
(b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar brand.
1
497
-
... More
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work, PVC Pipes. 100 mm dia
88
1145
-
... More
40 mm dia
2.5
294
-
... More
32 mm dia
95
238
-
... More
25 mm dia
15
178
-
... More
20 mm dia
35
130
-
... More
(Q) Ball Valve 40 mm
1
558
-
... More
32 mm dia
1
402
-
... More
25 mm dia
1
241
-
... More
20 mm dia
1
153
-
... More
Supply of I.S.I mark 4 Sq.mm Submerssible flat cable(Non schedule Item) (Rate as per PO No- 5100640575)
85
139
-
... More
Supplying of 1.5 HP, single phase CROMPTON GREAVES Submerssible pump set (Non schedule Item) (Rate as per PO No- 5100640575)
1
18973
-
... More
Supplying of Crompton Greaves (1.5 HP,Single phase) Submerssible Control panel No.STC -02 (Electrical contractor & Relay Type with both start and Run Capacitors. (Non schedule Item) (Rate as per PO No- 5100640575)
1
5748
-
... More
Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer.(b) 1000 litre capacity
1
5179
-
... More
Labour for hoisting plastic water storage tank.(i) Upto 1500 litre capacity.(a) Upto 2nd story from G.L.
1
140
-
... More
Labour for lowering plastic water storage tank and stacking in places as directed .(i) Upto 1500 litre capacity .Upto 2nd story from G.L.
1
87
-
... More
Labour for lowering plastic water storage tank and stacking in places as directed .(i) Upto 1500 litre capacity .Upto 2nd story from G.L.
2
19
-
... More
Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units:- (B) Partly glazed partly panelled or fully glazed single leaf alunminium swing door made of extruded and annodized alloy aluminium sections, fabrication including cutting to proper shape and size, drilling and aligning, fitted with heavy duty hydraulic action floor sping placed in the floor with mending damages,with top pin assembly of approve make and brand, fitted with in built locking arrangement, flush bolt, glazing clips and all other necessary fittings, fixtures, adhesives and joineries, cutting glass of approved make to requisite shape and size fitting with dry set neoprene or EPDM gasketing, cutting to requisite shape and size panel board (prelaminated particle block) fixing them with glazing clips as per drawing, specification and direction of Engineer in charge.
3.15
1293
-
... More
Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - InCharge. (Payment will be made on finished length of the work). (A) In 10-12 Micron thickness Annodizing film
I) Natural white. k) Movable door shutter. i) Door frame. (Top & sides)
-
318
-
... More
ii) Shutter : Top rail.
-
307
-
... More
Bottom rail.
-
452
-
... More
Lock rail
-
380
-
... More
Door vertical.
-
335
-
... More
Glazing cleap.
-
382
-
... More
Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor. (b) 32 mm thick shutters (single leaf)
4.2
2382
-
... More
Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge.The rate includes the cost of labour, adhesive and all incidental charges thereof. In ground floor Glossy/Matt/Suede excluding surface texture or metallic lustre. (i) Thickness of laminate 1.5mm
3
881
-
... More
Supplying EPDM gusket of approved make and brand as per direction of
Engineer in charge b) 'U' shaped EPDM gasket for frames
12
15
-
... More
iii) weather gasket / wool pile for door vertical.
12
19
-
... More
Anodised aluminium barrel/ tower/ socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:(vi) 200mm long x 10mm dia. bolt.
2
17
-
... More
Anodised aluminium D-type Handle of approved quality manufactured from extruded section conforming to I.S.Specification ( I.S.230/72) fitted & fixed complete. (a) With continuous plate base (Hexagonal/ Round rod ) (vii) 150 mm grip x 12 mm dia rod. .
6
112
-
... More
Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (vii) 100mm. X 58mm. X 1.90mm.
12
47
-
... More
Supplying 4-Lever Mortice Lock or any approved make and brand as per direction of the Engineer- in -charge.I) 150 mm.
1
381
-
... More
i) Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed complete. (b) Medium (I.S.I. size 2)
6
1379
-
... More
i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.
(b) 250mm long
3
160
-
... More
Labour for taking out door and window frame including shutter for repair or
replacement of different parts of the frame & refixing the same including mending good all damaes complete. (Concrete and brick work for mending damage will be paid separately) (a) Upto area 2.5 Sq.m
3
120
-
... More
Supplying and laying chequered tiles of any shade & of approved quality with (1:1½:3) cement concrete laid in panels or patterns as directed in pavement, footpath etc. including necessary underlay 25 mm thick [avg] cement mortar (1:3) complete in all respect with all labour and materials. [Using cement slurry @ 4.4 kg/Sq.m at back side and @2.4 kg/Sq.m for joint filling] Red Variety (i) 25 mm. thick
230
460
-
... More
M.S. works in cable trench cover slab chequared plate clamps cleats, brackets etc. made from fats, angles, channels, Tees, chaquered plates 6 mm. thick etc. including necessary cutting to size fabricating drilling of holes, forging welding, revetting tightening with bolts and nuts with necessary washer including erection, fitting and fixing in position with all labour and materials, complete as per drawing and direction.(Rate same as M.S. gate of Jail type)
7
10190
-
... More
Polishing only of old marble or terrazo work with oxalic acid powder using 33 gms/ sq.m. by manual labour / machine where necessary.
50
38
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%