Get tender documents at just ₹200 per tenderKnow More
Search made simple for latest tendersNo hidden charges. No keyword restrictionsExplore Our Plansor Pay Per Tender

Page No. 1 of 14 Government of West Bengal Office of the Deputy Inspector General of Police, Armed Police, Barrackpore, West Bengal, Kolkata – 700 120. Telefax: 033-25920630, Email: digapbkpore@gmail.com Tender Reference No.: WBP/DIG(AP)BKP/NIT-38(e)/2019-20 Memo. No.2211 Date: 06-08-2019 E-tenders are invited from the Manufacturers, Distributor or their Authorized Dealers for this specific tender only of outstanding repute andctually dealing in the trade. The Authorized dealers should have a written letter from the Manufcturer / Distributor to participate in this Tender invited by the Deputy Inspector General of Plice Armed Police, Barrackpore, for supply of the following Law & Order Equipments for the use of West Bengal Police. Rates should be quoted in the standardized BOQ format. Samples must be produced on declare date later on. The approximate requirements of these items and earnest money to be deposited are furnished below: Sl. No. Name of Items Quantity Remarks 1 Anti-Riot Aluminum Guard Wall 100 Pcs. 2 Anti-Riot Helmet. 2000 Pcs. 3 Poly Carbonate Lathi 1500 Pcs. 4 FRP Helmet With Visor 950 Pcs. 5 Full Body Protective Gear 6500 Pcs. 6 Cane Lathi 5000 Pcs. 1. In the event of e-filling, intending bidder may download the tender documents from the web site http://wbtenders.gov.in directly with the help of Digital Signature Certificate. Earnest Money should be submitted through only online mode, other mode of payment will not be entertained. Detailed information about online payment of bidders is mentioned at Section D (Instruction to Bidder) 2. Both Technical Bid and Financial Bid are to be submitted concurrently duly digitally signed in the website http://wbtenders.gov.in. Tender documents may be downloaded from website and submission of Technical Bid and Financil Bid will be done as per Time Schedule. Page No. 2 of 14 I. TECHNICAL SPECIFICATIONS ANTI-RIOT ALUMINIUM GUARD WALL 1. The wall should be made with Special Grade 6351T6 aluminium alloy extruded sections and perforated sheets of size 6 feet high and 4 ft wide. 2. The wall should have an impact load resistance of 200 kgs at the center of every pocket created by welding of perforated aluminium alloy sheets over the welded framework of extruded aluminum alloy pipes. 3. Each wall of 4 feet high should have a support structure both at the bottom and at the inclined back side frame, alloy with bottom projection outside and i side of the vertical folding wall. 4. Each wall of 4 feet width should have interconnection with the help of specially designed non projecting holding clips with locking provision by hanging pins and counter locking pins. 5. The frames and the sheets welded to each other with extruded hinges should be robust and should have a weld tear strength of 200 kgs of welded joints. 6. Each frames to be hinged with the other with the help of extruded hinges that are to be robust enough to withstand strength of 200 kgs at each point. 7. Each module of the wall to be interconnected with the help of specially designed non-projecting holding clip with the locking facility. 8. Each wall should have 2 coats of Aluminium paint for seamless finish. 9. Logo of West Bengal Police 10" X 10" to be placed on the top edge center of each wall. 10. There should not be any bulging in the aluminium frame. 11. Each wall should comprise of three different frames have been specification as given below: a. Main Frame b. Bottom Frame c. Inclined Frame Main Frame Bottom Frame Inclined Frame Alloy 6351 6351 6351 Temper T6 T6 T6 Aluminium Extruded Square Pipe 25mm X 25mm X 2mm 25mm X 25mm X 2mm 25mm X 25mm X 2mm Out of Out Dimension 72" X 48" 66" X 48" 66" X 48" Front Portion 2’ X 4’ Intermediate Support- vertical 1 Intermediate Support- Horizontal 3 Weld tear strength at all welded joints 200 kgs 200 kgs 200 kgs Thickne

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.