Water Resources Development Directorate Tender

Supply and instalation of 3phase electro motor pump motor set sutable for solar opperation covering 5 years warrenty for the following conditions including loading unloading transportation etc C) 5hp ISI marked 3 phase 415v pump-motor set having discharge at required head as bellow: ii) submersible pump motor set for LDTW ISI marked as per IS:8034 with discharge of 7.5lps-5.83lps at 30mtr-40mtr total head with cable, cover plate , socket, flange nipple, rubber insertion, nut & bolt and all other accwssories including transportation of bend, column pipe, cable, sluice valve, lay flat hose pipe etc fro deptt store to site within 100km.

Solar Module: Supply, transport, installation and commissioning of lSI marked as per IS 14286 and IEC 61853(1). 61730(1&2), 61710 certified Solar Module of Multi crysta lin elM anocrvs tilIIine/ Monocrystalline PERC/bifacial cell with min. efficiency of 15% and fill factor more than 70%, laminated between sheet of -Ethylene Vinyl Acetate (EVA) and high transmissivity .3.2/1•.1: r-un tempered glass, framed in anodized aluminium frame .The power output of individual PV modules used in the PV array, under STC, should be a minimum of 300 Watt peak, with adequate provision for measurement tolerances.Modules supplied with the SPV system should have warranty for output wattage, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. Necessary test certificate also to be supplied. (As per direction of EIC) b)For 5 HP Off-grid Solar Water Pumping System with Monocrystalline/ Monocrystalline PERC/bifacial SPV modules - 5600-5700 Wp.

The weight of the Module Mounting Structure holding 6 Modules should not be less than 210 Kg