Water Resources Development Directorate Tender
... More
The WRDD has issued a formal invitation for competitive bids for the Water Resources Development Directorate project, for Rejuvenation Of Dtw Along With Maintanance Of Pump House Wta And Other Related Work In Diffrent Blocks Under Krisnagar I Ai Divn Under Core Sector 2020 21 Programme in Nadia, West Bengal, with an estimated contract value of Rs. 15,87,755. The bid opening date for this tender is 22-06-2021 and the last date for bid submission is 12-07-2021. Interested bidders for Water Resources Development Directorate tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Water Resources Development Directorate - WRDD Tender
Eprocure
Opening Date22 Jun 2021
Closing Date12 Jul 2021
Tender Amount₹ 15,87,755
Costs
EMD
₹ 35,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Rejuvenation Of Dtw Along With Maintanance Of Pump House Wta And Other Related Work In Diffrent Blocks Under Krisnagar I Ai Divn Under Core Sector 2020 21 Programme
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_WRDD_333641_4Bid Award Id
ViewTender No
2 /CORE/2021-22 of the Executive Engineer (A.I.)Tender Authority
Water Resources Development Directorate ViewPurchaser Address
-Website
http://http://wbwridd.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supppying, fitting and fixing of 150 mm heavy duty supporting clamps in two halves made of M.S. flat for holding 150 mm N.B. Column pipe, thickness of the clamp 12 mm, width of the clamp 150 mm, extended length of the arm 200 mm, space between rows 100 mm, space between bolts in a row 75 mm, equally
spaced from the centre line of the arm, dia of bolt 16 mm. The gap between arms of clamp and pipe assembly before tightening should be between 6 mm to 10 mm. Two rows of bolts of two nos in each rows of 16 mm size shall be provided
on either side of the clamp, in other words there will be all together 4 rows of bolts with the provisions of 8 nos of bolts with nuts and with spring and flat washer.
WRDD P - 44 , I - 26
1
-
1578.5
... More
(c) Electric welding charges of upto 8 mm M.S. plate M.S. channels etc. and other member of the barge including hiring charges of all tools and plants.
2
-
434.7
... More
Earth filling in foundation trenches to plinth with good earth in layer not exceeding 150 mm including watering and ramming etc. by layer complete with earth obtained from excavation of foundation.
PWD Page - 1 , Item - 3
0.7
-
7754
... More
Supplying , fitting & fixing the following at site.
a)20 mm x 50/65 mm nuts & bolts having standard ( TATA / GKW make ) SE Approved Rate
12
-
140
... More
Supply & delivery of 3 Core 6 Sq. mm Copper PVC insulated ( Heavy duty ) Weather Proof Flat Electric Cable suitable for working upto and including 1100 Volts duly ISI Certification marked as per IS:694/1990 and latest amendments
S.E approved Rate [Estimate No. 223 of 2018-19]
100
-
223.1
... More
SUB TOTAL FOR PART -E
1
-
-
... More
Supply of 200 mm dia NB 6.4 mm nominal wall thickness, M.S.E.R.W. Pipe duly ISI certification marked, both ends Plain Grade Fe-410 conforming to IS:4270/2001 (Reaffirmed Nov. 2006) with latest amendments No. 1 ( (Each pipe shall be approx. 6 metre In length ) ( Total Length = 90.00 M )
Accepted Rate from Resources Circle [ NIT OF 19-20 ]
30
-
2472
... More
Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)
(a) With earth obtained from excavation of foundation.
PWD Page - 1 , Item - 2
1
-
7754
... More
Add extra @ 3% over schedule rates as District Charge for Nadia District except item no.4.01 &4.20
1
-
3
... More
(ii) With 1:4 cement mortar
(c) 10 mm thick plaster
20
-
128
... More
(iv) 150mm. dia. C.I.sluice valve
4
-
54.69
... More
Neat cement punning about 1.5mm thick in wall, dado, window
sill, floor etc.
NOTE:Cement 0.152 cu.m per100 sq.m.
PWD Page - 192 , Item - A.15
115
-
34
... More
Supplying & Fixing Out door type CFL luminaire (Bajaj make- 524020 / 020168) with epoxy powder coated sheet aluminium housing, aluminium reflector & clear acrylic cover and accessories incl. for 11/18 watts CFL S/L type lamp incl. S&F 15mm dia GI pipe bracket, clamp, nut & bolts etc..
PWD Elect. Page - D-13 , Item - 27
2
-
1188
... More
(i) 200 mm NB Bottom Plug
3
-
235.74
... More
(i) 10 mm. thick (350mm x 200mm) NB M.S. Reducer of approved quality including socket
1
-
3754.83
... More
Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.
a) In ground floor including roof.
PWD Page - 10 , Item - 1
8.5
-
447
... More
Pipe Line
Earth work in excavation of field trenches as per design section and alignment for laying of pipe lines (PVC, RCC, ACP etc.) upto a depth of 1500 mm all sorts of soils including removing, spreading or stacking extra earth as directed. The item includes necessary trimming of sides trenches, levelling, dressing and ramming the bottom as required complete
WRDD Page - 14 , Item -2.10.1
90
-
99.01
... More
125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.
PWD Page - 16 , Item - 16 [3RD CORR. P - 3 , S - 8]
1.5
-
679
... More
Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
PWD Page - 14 , Item - 1 [3RD CORR. P - 1 , S - 1]
30
-
327
... More
(i) Upto 30 metres below G.L.
30
-
1169.26
... More
(i) With 1:6 cement mortar
(c) 15 mm thick plaster
80
-
144
... More
Supply of 4 inch round projection type Ammeter (range 0-50/100 amps) MIAC, accuracy within ± 1.5% and conforming to IS:1248/1968. S.E approved Rate [Estimate No. 205 of 2018-19]
1
-
644.3
... More
Part -D : Internal Wiring of Pump House
-
-
-
... More
Distribution Wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to 5A 3 pin flush type plug socket with piano key type switch (Anchor make) fixed on sheet steel fabricated CRC MS switch board with bakelite/perspex (wall matching color) top cover of 3 mm thick flushed in wall by housing the board after cutting brick wall incl. necy. connection making earthing attachment, painting and mending good damages to building works [PVC casing-capping and plug box both on surface]
On Board
PWD Elect. Page - E-12, Item - 6 (a)
2
-
67
... More
(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows,
railing etc. fitted and fixed with necessary screws and lugs in ground floor.
ii) Grill weighing above 16 Kg./sq.mtr and above
PWD Page - 104 , Item - 13 [3RD CORR. P - 91 , S - 10]
-
-
-
... More
(b) In superstructure, ground floor
PWD Page - 15 , Item - 8 [3RD CORR. P - 1 , S - 4]
7.5
-
5174
... More
(i) With 1:6 cement mortar. (c) 15 mm thick plaster
26.4
-
144
... More
Fitting and fixing of M.S. I G.I. I C.l.accessories and special in pipe line (accessories & special to be supplied departmentally) including supply of jointing materials viz.rubber insertion, nuts & bolts, havoc Zink (Zink Oxide) complete as per direction of Engineer-in-Charge.
WRDD Page - 14 , Item -2.20.2 & Page - 19 , Item -2.30.7
-
-
-
... More
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.
(a) Depth of excavation not exceeding 1,500 mm.
PWD Page - 1 , Item - 1
1.08
-
11927
... More
Plugging the open end of 450mm. / 300 mm. /225 mm. /150 mm. dia. RC.C. pipe line with cement concrete (1:2:4) with stone chips 20 mm. down mixed with water proofing compound(5% by weight of Cement) of approved quality including curing etc. complete as per direction of Engineer-in-Charge.
(iii) 225mm. dia. R.C.C. pipe
WRDD Page - 18 , Item -2.30.6
1
-
188.59
... More
Mobilisation charges for transporting upto site including loading, unloading of all plants, machinaries & equipments required for drilling, development and testing of Tubewells and also the cost of construction of temporary roads over field and / or culverts, repairing existing roads and / or culverts all complete, carrying materials on head load, carts or boats as the case may be :-
(i) For sites within 4 km from all weather metal road.
WRDD Page - 2 , Item - 7
1
-
7625.64
... More
Brick work with 1st class bricks in cement mortar (1:6)
a) In foundation and plinth
PWD Page - 15 , Item - 8 [3RD CORR. P - 1 , S - 4]
5
-
4952
... More
SUB TOTAL INCLUSIVE OF EXCESS CARRIAGE COST
1
-
321348.44
... More
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat
25 mm x 6 mm on wall having clearance of 6 mm from wall
including providing drilled holes on the busbar complete with
GI bolts, nuts, washers, spacing insulators etc. as required
PWD Elect. Page - G-2 , Item - 4 (a)
0.3
-
156
... More
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.
a) Pakur Variety (Effective Distance 60 km)
PWD Page - 24 , Item - 4 [3RD CORR. P - 10 , S - 27]
0.55
-
5485.74
... More
Installation / Erection of SurgeTank / Shore manifold (to be supplied from Deptt. free of cost) over a rigid base of ordinary cement concrete (1:2:4) with graded stone chips (20mm. nominal size) of pakur varity of 1250 mm X 1250mm X 150 mm. over a single layer of brick flat soling and embedding the legs of the surge tank/shore manifold within the concrete base including cost of all materials and labour and as per direction of Engineer-in-Charge WRDD Page - 18 , Item -2.30.5
1
-
2263.08
... More
Fixing only starters (for motor control) on flat iron frame / angle iron frame on wall
Star-Delta starter for motor (above 5 HP upto 15 HP)
On flat iron frame (for lower rating)
PWD Elect. Page - C-1 , Item - 7(b)
1
-
215
... More
TOTAL FOR PART -B
1
-
206511.47
... More
GST @ 12 PERCENT OF SUB TOTAL
12
-
367926.11
... More
Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.
PWD Page - 11 , Item - 10
110
-
19
... More
Development of tubewell in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand conent beyond permissible limit with required capacity of compressor ( about 200 psi, 375 cfm Aircompressor,actual psi and cfm depend on tube well head conditions), running the compressor for required time till well is fully developed and followed by development of tube well by over puming with 15% to 25% higher discharge than expected discharge of tube well capacity Vertical Trubine pump and carrying out step-drawdown test, yield test, verticality test etc as per prescribed method all complete including hire & labour charges of compressor,tools & accessories etc. all as per requirement and direction of Engineer -In - Charge.
(i) Depth upto 120 metre.
WRDD Page - 2 , Item - 5
1
-
36469
... More
SUB TOTAL FOR PART -D AFTER INCLUSION OF EXCESS CHARGES OF SL NO 4.23
1
-
11205.61
... More
Connecting the equipments to earth busbar including S & F GI
(Hot Dip) wire of size as below on wall/floor with staples buried
inside wall/floor as required and making connection to
equipments with bolts, nuts, washers, cable lugs etc. as
required and mending good damages
(a) Solid GI wire
(iii) No. 8 SWG
PWD Elect. Page - G-2 , Item - 5 (a) (iii)
14
-
9
... More
B) UPVC Fittings:
a) Plain Tee
1
-
102
... More
(ii) 200 mm NB Slotted pipe
30
-
235.74
... More
PART-B : Construction / Maintenance of Pump House
-
-
-
... More
Labour Welfare Cess @ 1%
1
-
1
... More
PART-C : Maintenance of Spout Chamber & R.C.C. Pipe Line (WTA System)
-
-
-
... More
Supplying, fitting & fixing of M.S. plate of size 40 cm x 40 cm, thickness 6 mm, consisting of two equal halves (40cm x 20cm), placed over Housing Pipe of HDTW/ MDTW to rest the supporting clamps, with semi circular hole of 170 mm dia. at centre including locking arrangement between the two halves on both sides, including fitting, fixing of 40 mm dia. G.!. bend by making a hole on plate for passing submersible cable smoothly and complete in all respect.
WRDD P - 41 , I - 4
1
-
897.69
... More
Labour Welfare Cess @ 1% EXCEPT SL NO 8.20
1
-
78456
... More
TOTAL FOR PART -F
1
-
-
... More
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.
(a) Depth of excavation not exceeding 1,500 mm.
PWD Page - 1 , Item - 1
3.6
-
11927
... More
Repairing of leakages in collar joints of R.C.C. Pipe line by opening the joints fully by chipping out the old morter, cleaning the pipe recesses and collar properly, and thereafter positioning and levelling the pipes and collar, filling the annual spaces of joints with jute braiding dipped in cement slurry and grouting with (1:2) cement morter mixed with approved quality water proofing compound (5% by wt. of cement) and curing all complete as per direction of Engineer-in-Charge.
(c) 225 mm dia. R.C.C. Pipe.
WRDD Page - 19 , Item -2.30.8
40
-
67.89
... More
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.
(a) Depth of excavation not exceeding 1,500 mm.
PWD Page - 1 , Item - 1
1
-
11927
... More
SUB TOTAL FOR PART -D
1
-
10933.16
... More
(i) With 1:6 cement mortar
(c) 15 mm thick plaster
85
-
144
... More
b) Removing of Chokage due to sludge, mud, sand or any other forign materials deposition from the underground 450 / 300 /225/ 150 mm dia. R.C.C. Pipe Line with split bamboo, wire brush, coir rope etc. along with suitable cleaning agent as necessary as per direction of E.!.C. (This item includes cost of earth cutting & back filling of trenches and required materials for cleaning but excluding the cost
for taking out 1 full length of RCC Pipe by dismantling of 2 nos. of Collars & refitting the RCC pipe with new two nos. collar).
iii) For 225 mm dia. RCC Pipe
WRDD Page - 41 , Item - 9.2
400
-
38.66
... More
(iii) beyond 60 metres and upto 90 metres
30
-
1178.69
... More
PART A+B+C+D+E+F+G+H
-
-
-
... More
Drilling of bore hole 55.88 cm dia through any kind of soil by adopting any method of drilling (by Direct or Reverse Circulation Rotary Rig) upto required depth including digging trenches and pits etc. all complete.
WRDD Page - 1 , Item - 1
-
-
-
... More
Extra rate allowed over schedule rates @3 % for construction of pump house of DTW/HDTW considering remote places, away from town except Sl. No.2.1,2.2,2.3
1
-
3
... More
Neat cement punning about 1.5mm thick in wall, dado, window
sill, floor etc.
NOTE:Cement 0.152 cu.m per100 sq.m.
PWD Page - 192 , Item - A.15
22
-
34
... More
Jointing the end of 150 mm. dia. M.S. extension pipe for spout chamber with 150mm. end of R.C.C. Tee including carrying the M.S. extension pipe from store to site, levelling and positioning the end of extension pipe concentrically with 150mm. end of R.C.C. Tee on bricks laid flat within the field trench and jamming the joints with cement concrete (1:2:4) with stone chips 10 mm. down mixed with approved water proofing compound 5% by weight of cement) of adequate thickness to provide a leak proof joint as per direction of Enginer-in-Charge (Cost of bricks for levelling is included).
WRDD Page - 18 , Item -2.30.3
3
-
81.09
... More
Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.
PWD Page - 11 , Item - 10
115
-
19
... More
Jointing the undermentioned R.C.C. pipe fittings (pipeline specials) in the R.C.C. pipe line with matching RC.C. collars including handling and carrying the fittings and matching R.C.C. collars from field stack, lowering in the trenches, properly levelling and positioning on bricks laid flat, filling the annular space between pipe fitting and collars with Jute braiding dipped in cement slurry, grouting with cement and sand mortar (1:2) mixed with approved water proofing compound (5% by weight of cement) and curing etc. complete as per
direction of the Engineer-in-Charge (Cost of bricks for levelling and Jute braiding are included).
WRDD Page - 18 , Item -2.30.2
-
-
-
... More
Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling.
PWD Elect. Page - D-13 , Item - 22
1
-
38
... More
SUB TOTAL FOR PART -F INCLUSIVE OF GST
1
-
-
... More
TOTAL FOR PART -D
1
-
12675.78
... More
i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.
(b) 250mm long.
PWD Page - 142 , Item - 10
1
-
159
... More
Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.
PWD Page - 212 , Item - 21
-
-
-
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar
including rounding off or chamfering corners as directed and
raking out joints including throating, nosing and drip course,
scaffolding/staging where necessary (Ground floor).[Excluding
cost of chipping over concrete surface]
(i) With 1:6 cement mortar
(c) 15 mm thick plaster
PWD Page - 189 , Item - A.1 [3RD CORR. P - 49 , S - 1]
7
-
144
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns,lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)
(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.
PWD Page - 42 , Item - 36
30
-
330
... More
PART-F : Supply & Delivery of Different Materials
-
-
-
... More
Labour Welfare Cess @ 1%
1
-
12550.28
... More
(iv) 350 mm NB Housing pipe
36
-
518.62
... More
Supplying, fitting, fixing on wall 1.00 M X 0.6 M rectangular shaped M.S. frame made with 30mm X 6mm M.S. flat welded ( 4 nos. horizontally, 2nos. Vertically and other 4 nos vertically inside the rectangle ) by lectric welding for fitting , fixing of Starter , Main switch, Volt meter. Amp meter etc. with adjustable screws, nuts 4nos of legs 15 cm long with bifurcated ends and jamming the same in wall holes with cement concrete (1:2:4) and mending good all damages.
0.16
-
9696
... More
(ii) M.S. Centre guide (consisting of 3 nos., 6 mm thick, 50 mm wide, not less than 600 mm long and 125 mm rise of arch) of approved quality.
15
-
231.02
... More
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.
a) Pakur Variety
PWD Page - 24 , Item - 4 [3RD CORR. P - 10 , S - 27]
1
-
5485
... More
Labour Welfare Cess @ 1%
1
-
139318.74
... More
Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including tacking of steel bars.
a) In ground floor including roof.
PWD Page - 10 , Item - 3
2.75
-
1956
... More
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.
a) Pakur Variety
PWD Page - 24 , Item - 4 [3RD CORR. P - 10 , S - 27]
2.75
-
5485.74
... More
GST @ 12 PERCENT OF SUB TOTAL
1
-
12
... More
Add extra carriage @ 4% for remote site Excluding Sl. No.8.01,8.10,8.11,8.20
1
-
4
... More
Supplying 230/250 Volt , 15/18 Watt LED Lamp (Havells/Philips make) . Model -LED New Adore 15 W E27 WW Ball lamp.
As per current Price List
1
-
300
... More
Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc.
2 x 22/0.3 (1.5 sqmm)
PWD Elect. Page - E-11 , Item - 1 (b)
(Domestic Main Switch Loop connection from Pump controller to domestic Main Switch.)
2
-
71
... More
GST @ 12 PERCENT OF SUB TOTAL
12
-
182559.64
... More
SUB TOTAL FOR PART -C
1
-
121656.13
... More
Making slots of 75 mm X 1.60 mm size with a minimum clearance of 4.70 mm in between two adjacent slots over the outer surface of 200 mm NB ERW pipes (to be issued departmentally) in 10 (ten) rows (each row consisting of 96 slots) per metre length of ERW pipe with a clearance of 25 mm in between two rows as per drawing and pecification including smoothening the edges after slotting, cost of
transportation of ERW pipes from Departmental Store to Workshop and back to drilling site, loading, unloading and carrying by head-load where necessary both ways, all complete.
WRDD Page - 2 , Item - 6
30
-
942.95
... More
(i) With 1:6 cement mortar
(c) 20 mm thick plaster
30
-
165
... More
Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
PWD Page - 14 , Item - 1 [3RD CORR. P - 1 , S - 1]
18.95
-
327
... More
Neat cement punning about 1.5mm thick in wall, dado, window
sill, floor etc.
NOTE:Cement 0.152 cu.m per100 sq.m.
PWD Page - 192 , Item - A.15
7
-
34
... More
Labour charges for lowering of ERW MS pipes, strainers,blank pipe etc. and fitting, fixing and jointing of tubewell assembly at site by welding as per direction of the Engineer-incharge.
WRDD Page - 1 , Item - 2
-
-
-
... More
125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.
PWD Page - 16 , Item - 16 [3RD CORR. P - 3 , S - 8]
6.5
-
679
... More
(v) beyond 120 metres and upto 150 metres
3
-
1206.98
... More
Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single
core stranded 'FR' PVC insulated & unsheathed copper wire
(Brand approved by EIC) in suitable size PVC casing-capping
(Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to light/fan/call bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works.
[PVC casing-capping and Switch board both on surface]
Average run 5 mtr
PWD Elect. Page - E-11 , Item - 2 (a)
3
-
577
... More
(a) Cost of 5 mm M.S. plate including wastage due to cutting, including labour charges for straightening fitting, fixing in position.
0.3
-
2432.81
... More
(v) 150mm. dia. C.I.NTP/ Alfa-Alfa valve.
8
-
54.69
... More
Joining water proof cable with the leads of the motor including soldering with requisite water proof insulation and proper joining compoundNulcanized rubber tape so that proper water proof insulation is assured.
WRDD P- 26 , I - 11(h)
2
-
99.01
... More
Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
PWD Page - 14 , Item - 1 [3RD CORR. P - 1 , S - 1]
1.5
-
327
... More
(iv) beyond 90 metres and upto 120 metres
30
-
1197.55
... More
Painting with ready mixed Black Japan of approved make and brand including smoothening surface. b) Two Coats
PWD Page - 201 , Item - 5
17
-
56
... More
Supplying, fitting and fixing PVC pipes for underground work of
approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories,
specials.)
PVC Pipes
32 mm (Dia)
PWD (S & P) Page - 13 , Item - 19 (ii)
12
-
250
... More
In Ground Floor:
(b) Two Coats
60
-
70
... More
(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows,
railing etc. fitted and fixed with necessary screws and lugs in ground floor.
ii) Grill weighing above 16 Kg./sq.mtr and above
PWD Page - 104 , Item - 13
-
-
-
... More
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.
(i) Pakur Variety
PWD Page - 26 , Item - 10 [3RD CORR. P - 12 , S - 33]
3
-
6034.73
... More
Carriage of miscellaneous materials over pucca road upto 5 km.distance
(c) ERW /MS pipe
WRDD Page - 35 , Item - 7 (A)
iv) 200 mm. dia.
9.0X6.0=54
54
-
8.02
... More
Drawing submersible cable of motor and pump in 32mm. Dia G.I. conduit 16 SWG upto pump controller making necessary connection and also drawing 8 SWG G.I. wire for earthing attachment by f cutting/ laying on the floor and mending good damages. SE (A-I) Approved [NIT No - 14/14-15 of EE (A-I) ]
20
-
82.5
... More
Supply & Fixing EI danger board on wall
20 cm x 30 cm (8"x12")
PWD Elect. Page - D-13 , Item - 21
2
-
85
... More
SUB TOTAL FOR PART -H
1
-
320182.41
... More
Supplying, fitting, fixing including fabrication (IS -2800 Part -I with latest amendments) with required materials as directed by the Engineer-in-charge and lowering in position etc.
WRDD Page - 1 , Item - 3
-
-
-
... More
Supplying and fixing Sheet steel Main Switches on flat iron frame on wall
15/16 A Havells
240V DP with fuse on L&N
PWD Elect. Page - D-1 , Item - 1(a)
1
-
576
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar
including rounding off or chamfering corners as directed and
raking out joints including throating, nosing and drip course,
scaffolding/staging where necessary (Ground floor).[Excluding
cost of chipping over concrete surface]
PWD Page - 189 , Item - A.1 [3RD CORR. P - 49 , S - 1]
-
-
-
... More
25mm. thick damp proof course with cement concrete with stone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound as per manufacturer's specification followed by two coat of polymer based paint, (1st coat after 4 to 5 days of concrete laying and 2 nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer based paint to be paid separately).( Chequering not required over concrete or painted surface).
[Note: - Waterproofing as per item 9, polymer based paint as
per item 8 (a) of subhead C of Section (C).
PWD Page - 47 , Item - 2 [3RD CORR. P - 22 , S - 1]
4
-
191
... More
Supply of ISI Marked Submersible motor pump set having capacity of 200 Cum/hr. discharge at 18 Mtr. total head, along with flat submersible electric cable 2x3x4 Sq mm of 3 mtr. For motor pump set consisting of bowl with strainer and non-return valve. Motor should be deigned for operating at 415V+6% and - 15%, 3 phase, 50 Hz., ± 3% AC supply, wet type, water filled, totally enclosed squirrel cage induction motor, water cooled, water lubricated. Motor as per IS 9283/1995 with latest amendments thereof & Pump as per IS: 8034/2002, with latest amendments thereof. H.P – 20, NRV 6” Accepted Rate from Resources Circle [ NIT OF 19-20 ]
1
-
64072
... More
Supply of M.S. Hexagonal Head Nuts & Bolts conforming to IS:1363(Part-I)/1992 of Product grade C with latest ammendment for bolts & IS:1363(Part-III)/1992 of Product grade C with latest ammendment for Nuts, properties/Class for Bolt 4.6 & for nuts 4.5. Both bolts & nuts are to be duly ISI certification marked nominal size-M 10 to M 24 of corresponding ISI specification of different sizes.
size - 20 mm X 50/65 mm nuts & bolts having standard thread (TATA / GKW) or approved make S.E. approved Rate [Estimate No. 229 of 2017-18]
10
-
140
... More
SUB TOTAL FOR PART -A INCLUSIVE OF GST
1
-
412077.24
... More
Taking out the condemmed 150 mm dia. N.T.P.fT.P'/ Alfa-Alfa valve from 150 mm dia. M.S./G.I. pipe of existing spout chamber by careful chiseling with least disburbance to the existing system of structure upto required limit and fitting, fixing of new one with 150 mm dia. M.S./G.I. pipe in proper position of the spout chamber using havoc zinc jute so as to make the joint leak proof including mending good all damages and returning back the condemned materials at store as per direction of Engineer-in-Charge.
WRDD Page - 20 , Item -2.30.11
8
-
81.09
... More
Labour Welfare Cess @ 1%
1
-
204466.8
... More
(iii) M.S.Top cap of suitable size (8 mm thick) and approved quality for covering top of housing pipe of 350 mm NB (Top cap will be tack welded with housing pipe at 4 points 90° apart).
1
-
1073.08
... More
(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows,
railing etc. fitted and fixed with necessary screws and lugs in ground floor.
(ii) Grill weighing above 16 Kg./sq.mtr and above
PWD Page - 104 , Item - 13 [3RD CORR. P - 91 , S - 10]
0.94
-
9696
... More
Jointing the end of 150 mm. dia. M.S. extension pipe for spout chamber with 150mm. end of R.C.C. Tee including carrying the M.S. extension pipe from store to site, levelling and positioning the end of extension pipe concentrically with 150mm. end of R.C.C. Tee on bricks laid flat within the field trench and jamming the joints with cement concrete (1:2:4) with stone chips 10 mm. down mixed with approved water proofing compound 5% by weight of cement) of adequate thickness to provide a leak proof joint as per direction of Enginer-in-Charge (Cost of bricks for levelling is included).
WRDD Page - 18 , Item -2.30.3
5
-
81.09
... More
Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both
faces of M.S./ W.I. gate etc. with point welding at not more than
150mm apart complete in all respect as per design including cost of all labour and materials.
PWD Page - 105 , Item - 15 [3RD CORR. P - 91 , S - 12]
4.68
-
1304
... More
Jointing plain end of 300 mm /200 mm /150 mm. Dia. M.S. special bend from surge tanks / shore manifold with underground R.C.C. pipe lines of 450mm. / 300mm. / 225 mm. dia. by jamming with cement concrete (1:2:4) with 10 mm. down stone chips mixed with approved water proofing compound (5% by weight of cement) of adequate thickness to provide a leak proof joint including carrying the special bend from departmental store to site, curing etc. as per direction of Engineer-in-Charge.
WRDD Page - 18 , Item -2.30.4
3
-
83.92
... More
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.
(a) For works in foundation and upto roof of ground floor/upto 4 m
(i) Tor steel/Mild Steel
II. Other than
SAIL/ TATA/RINL
PWD Page - 43 , Item - 40 (a)(i)(II) [9th CORR. P-1 , S-1]
0.28
-
54413.87
... More
GST @ 12 PERCENT OF SUB TOTAL
12
-
11205.61
... More
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. PWD Page - 196 , Item - 8
-
-
-
... More
Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. PWD Page - 196 , Item - 10
-
-
-
... More
Supply of CI NTP valve as per drawing (annexture E ) with MS spindle and weght of the bottom dise to be fitted with rubber washer which will be fitted tightly at the closing of NTP valve .It should be arrenged of square type key holder made of MS complete including two coat of painting over a coat of priming .Approximatewight 20 Kgs excluding keys. 150 mm dia nominal size.
Accepted Rate from Resources Circle [ NIT 13 OF 17-18 ]
8
-
2669
... More
PART-H : Construction of Spout Chamber & Laying of R.C.C. Pipe Line
-
-
-
... More
d) Shoe
(ii) 75 mm. Dia.
1
-
78
... More
a) 0-500 voltmeter ( Wire & other material Deptt. Supply )
1
-
57
... More
(iv) 100 mm width × 12 mm thick Sockets / Rings made from MS Flats by rolling process and double butt welding for jointing 350 mm NB Pipe.
5
-
721.36
... More
TOTAL FOR PART -A
1
-
416198.01
... More
Add extra carriage @ 3% for remote site Excluding Sl. No. 3.01,3.02,3.15,3.16,3.41
1
-
3
... More
Supply of 96 X 96 Square mm flush mounting Voltmeter (0-500 V) MIAC, accuracy within ± 1.5% and conforming to IS 1248/1968. S.E approved Rate [Estimate No. 205 of 2018-19]
1
-
643.1
... More
(i) With 1:6 cement mortar
(b) 20 mm thick plaster
37
-
165
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar
including rounding off or chamfering corners as directed and
raking out joints including throating, nosing and drip course,
scaffolding/staging where necessary (Ground floor).[Excluding
cost of chipping over concrete surface]
PWD Page - 189 , Item - A.1 [3RD CORR. P - 49 , S - 1]
-
-
-
... More
Supply of 5 mm thick Rubber insertion for raised surface of flange as per IS:6392/1971, made from white rubber sheet reinforced with 2 ply cotton fabric without holes as per IS:638/1979 with latest ammendmnet if any with ISI marked suitable for ISI marked MS flange (Table-5,11,17)
f) 150 mm dia rubber insertion with standard drilled holes (5mm thick)
S.E approved Rate [Estimate No. 304 of 2020-21]
20
-
110
... More
GST @ 12 PERCENT OF SUB TOTAL
12
-
124391.73
... More
Supplying, fitting and fixing pump protector having outer dia. 250 mm height 250 mm made with 5 nos. vertical member of Indian Standard angle (40 X 40 X 5 mm) , 16 mm dia. MS Rod (at top & bottom) & 25 mm X 6 mm MS flat as per direction including cost of labour and materials, welding all complete.
0.1
-
9696
... More
Labour Welfare Cess @ 1%
1
-
412077.24
... More
SUB TOTAL FOR PART -D INCLUSIVE OF GST
1
-
12550.28
... More
3Ø oil immersed Star- Delta starters for 20HP motor. [ NIT OF 19-20 ]
1
-
22653
... More
TOTAL FOR PART -F
1
-
-
... More
Labour for loading the following materials into trucks, carts, boats etc. at lifting point and unloading the materials at the destination and stacking the sameas per direction including carriage by headload upto a lead of 100 metres at each end.
c) ERW / MS Pipe
WRDD Page - 34 , Item - 3 iv) 200 mm. dia.
9.0X6.0=54
54
-
17.44
... More
125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.
PWD Page - 16 , Item - 16 [3RD CORR. P - 3 , S - 8]
12
-
679
... More
(ix) 225 mm R.C.C Bend
3
-
57.52
... More
SUB TOTAL FOR PART -B AFTER INCLUSION OF CARRIAGE
1
-
182559.64
... More
Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof. (a) upto 150 mm. thick PWD Page - 10 , Item - 2
3.85
-
939
... More
(A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
PWD Page - 2 , Item - 4 (a)
0.18
-
65571
... More
SUB TOTAL FOR PART -C AFTER INCLUSION OF CARRIAGE
1
-
124391.73
... More
Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F
MS saddles with earthing attachment in 10 SWG GI (Hot Dip)
Wire, making holes etc. as necy. mending good damages and
painting ( from meter to incomming main switch, cable will be supplied by Deptt. )
PWD Elect. Page - F-1 , Item - 2(b)
4
-
60
... More
Brick work with 1st class bricks in cement mortar (1:6)
a) In foundation and plinth
PWD Page - 15 , Item - 8 [3RD CORR. P - 1 , S - 4]
0.8
-
4952
... More
TOTAL FOR PART -C
1
-
140711.93
... More
Electrologging of bore hole of different dia tubewell for locating water bearing strata and saline aquifer, if any, after conducting relevant geophysical tests. All test reports, compiled data and raw data sheets should be submitted to the Engineer-in-Charge (Cost is inclusive of all charges for equipments,labour, data aquisition & compilation of data sheets as per direction of the Engineer-in-charge)
WRDD Page - 6 , Item - 6
1
-
8015.08
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar
including rounding off or chamfering corners as directed and
raking out joints including throating, nosing and drip course,
scaffolding/staging where necessary (Ground floor).[Excluding
cost of chipping over concrete surface]
PWD Page - 189 , Item - A.1 [3RD CORR. P - 49 , S - 1]
-
-
-
... More
(vi) 300 mm /200 mm / 150mm. dia. M.S. special bend.
3
-
49.03
... More
Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.
a) In ground floor including roof.
PWD Page - 10 , Item - 1
9.5
-
447
... More
(A) Transportation of Submersible Electro Motor Pumping set along with all other accessories and equipments including bend, sluice valve, column pipes etc. from Sub-Divisional Store to worksite including loading at the lifting point and unloading at the delivery point including necessary head load upto 100
metre at both ends.
(A) Carriage by road
(a) Distance upto 50 km.
(i) 100/150/200 cubic metre per hour (m3/hr) capacity electro motor pumping set with column pipes and accessories etc. (full set)
WRDD P - 36 , I - 14 (A) (a) (i)
1
-
2945.78
... More
(a) One Coat
i) Water based interior grade Acrylic Primer
60
-
3080
... More
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. PWD Page - 197 , Item - 17
-
-
-
... More
Patch/Doubling works complete with M.S. plate including welding, gas cutting, fitting, fixing complete.
WRDD P - 31 , I - 4
-
-
-
... More
a) 0-50 Amp ammeter ( Wire & other material Deptt. Supply )
1
-
57
... More
Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
PWD Page - 14 , Item - 1 [3RD CORR. P - 1 , S - 1]
7.2
-
327
... More
SUB TOTAL FOR PART -E INCLUSIVE OF GST
1
-
-
... More
GST @ 12 PERCENT OF SUB TOTAL EXCEPT SL NO 8.20
12
-
70050.44
... More
TOTAL FOR PART -E
1
-
-
... More
(ix) 80mm. dia 3 metres long G.1.pipe with one end flanged
1
-
54.69
... More
Earth work in excavation of field trenches as per design section and alignment for laying of pipe lines (PVC, RCC, ACP etc.) upto a depth of 1500 mm all sorts of soils including removing, spreading or stacking extra earth as directed. The item includes necessary trimming of sides trenches, levelling, dressing and ramming the bottom as required complete
WRDD Page - 14 , Item -2.10.1
245
-
99.01
... More
Laying and joining of RC.C. spun pipes with matching collars of different sizes mentioned below in field trenches including handling and carrying the pipes and matching R.C.C. collars from field stack, lowering the same within the trench, property positioning and levelling on bricks laid flat, filling the annular space between collar and the pipe joint with Jute braiding dipped in cement slurry, grouting with cement and sand mortar (1:2) mixed with approved quality water proofing compound (5% by weight of cement) including cost of cements, bricks for levelling, jute braiding etc.) and curing all complete as per direction of Engineer-in-Charge.
(iii) 1830mm. long 225mm. dia.
WRDD Page - 18 , Item -2.30.1
245
-
32.3
... More
Neat cement punning about 1.5mm thick in wall, dado, window
sill, floor etc.
NOTE:Cement 0.152 cu.m per100 sq.m.
PWD Page - 192 , Item - A.15
26.4
-
34
... More
(b) Gas cutting to required size of upto 8 mm thick M.S. plate, Channel, Angle etc. including labour charges, hire charges for all tools and plants.
2
-
185.76
... More
In Ground Floor:
(a) One Coat
70
-
3140
... More
PART-E : Installation of Submersible Motor Pump Set & M.S. Connection
-
-
-
... More
(iv) 225 mm x 225 mm x 150 mm. R.C.C. Tee
3
-
57.52
... More
A) UPVC Pipes:
(ii) 75 mm. Dia.
3.3
-
188
... More
(ii) beyond 30 metres and upto 60 metres.
30
-
1159.83
... More
(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :
(b) On steel or other metal surface :
With super gloss (hi-gloss) -
(iv) Two coats (with any shade except white)
PWD Page - 200 , Item - 2
11
-
79
... More
Plugging the open end of 450mm. / 300 mm. /225 mm. /150 mm. dia. RC.C. pipe line with cement concrete (1:2:4) with stone chips 20 mm. down mixed with water proofing compound(5% by weight of Cement) of approved quality including curing etc. complete as per direction of Engineer-in-Charge.
(iii) 225mm. dia. R.C.C. pipe
WRDD Page - 18 , Item -2.30.6
4
-
188.59
... More
(i) 150 mm dia ERW Pipe
15
-
134.84
... More
Fixing only Sheet Steel Main Switch (Rewirwable type)/ Change over on Flat Iron Frame/Angle Iron Frame on wall
63 Amps On angle iron frame
PWD Elect. Page - C-1 , Item - 1
1
-
215
... More
Installation of submersible electro motor pumping set of following capacities by using necessary requisite, tools and plants by lowering the same within the tubewell housing pipe upto the following depth as per direction by fitting, fixing
column pipes and other accessories, fixtures with necessary nuts, bolts and washers and suspending the entire assembly of pump set vertically by fixing the same supported by M.S. clamps over the top of housing pipe, binding the motor cable with each column pipes and drawing cable upto pump controller/starter point including opening out of the top cap of housing pipe of the tubewell and testing of motor both in loading as well as in unloaded condition before and after installation of the same. (The rate is inclusive of hiring charges of tools & plants.)
(a)100/150/200 cubic metre per hour capacity electro motor
(ii) Length of pump assembly of any length exceeding 18 metre
WRDD P - 27 , I - 1
1
-
1510.61
... More
Painting block letters or digits in Black Japan or any approved paint as per direction above 7.5 cm and upto 10 cm
PWD Page - 268 , Item - 17
60
-
12
... More
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor)PWD Page - 195 , Item - 7
-
-
-
... More
SUB TOTAL FOR PART -B INCLUSIVE OF GST
1
-
204466.8
... More
GST @ 12 PERCENT OF SUB TOTAL
1
-
12
... More
Carriage of miscellaneous materials over pucca road
(b) ERW/MS pipe
WRDD Page - 35 , Item - 7 (B)
(i) For carriage of 200 mm dia Beyond 5 km and upto 50 km (for 45 km)
From 50 km upto any distance (for 30 km)
9.0X6.0=54
54
-
23.57
... More
Fitting and fixing of M.S. I G.I. I C.l.accessories and special in pipe line (accessories & special to be supplied departmentally) including supply of jointing materials viz.rubber insertion, nuts & bolts, havoc Zink (Zink Oxide) complete as per direction of Engineer-in-Charge.
WRDD Page - 14 , Item -2.20.2 & Page - 19 , Item -2.30.7
(v) 150mm. dia. C.I.NTP/ Alfa-Alfa valve.
3
-
54.69
... More
Switch Fuse Unit 63 amp
Accepted Rate from Resources Circle [ NIT OF 19-20 ]
1
-
4856
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns,lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) 25 mm. to 37.5 mm. thick wooden shuttering. Without Staging
PWD Page - 42 , Item - 36
2.5
-
205
... More
a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
PWD Page - 200 , Item - 1
11
-
29
... More
Supply of NP-2 class 225 mm bore dia. R.C.C. spun Pipe of length 1.83 metre thickness 25 mm with matching collar as per IS: 458/1988 with latest amendment thereof including all taxes and transportation cost etc. [Analysis of Rate attached]
138
-
1821
... More
SUB TOTAL FOR PART -F
1
-
-
... More
(viii) 150mm. dia. M.S. riser pipe with flanged ends
5
-
49.03
... More
PART-A : Drilling and Installation of DTW of Size (350 MM X 200 MM)
-
-
-
... More
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.
a) Pakur Variety
PWD Page - 24 , Item - 4 [3RD CORR. P - 10 , S - 27]
0.15
-
5485.74
... More
Withdrawal of electro motor submersible pumping set of fOllowing capacities from within the tubewell housing pipe of the fOllowing length by using all necessary requisites tools and plants and carefully as per direction of Engineer-in-Charge and stacking the same properly at site within the tubewell premises complete.
(a) 100/150/200 cubic metre per hour capacity electro motor pumping set.
(ii) Length of pump assembly of any length exceeding 18 metre length.
WRDD P - 27 , I - 2
1
-
1045.73
... More
Supply of 350 mm dia NB 8 mm nominal wall thickness, M.S.E.R.W. Pipe duly ISI certification marked, both ends Plain Grade Fe-410 conforming to IS:4270/2001 (Reaffirmed Nov. 2006) with latest amendments No. 1 ( Each pipe shall be approx. 6 metre In length ) ( Total Length = 42.00 M )
Accepted Rate from Resources Circle [ NIT OF 19-20 ]
36
-
5308
... More
SUB TOTAL FOR PART -A
1
-
367926.11
... More
Finishing the end of following XLPE/PVC armoured cables by
crimping method incl. supplying and fixing solderless socket
(Dowels make), tapes, anticorrosive paste & jointing materials :
3½ core 25 sqmm cable
PWD Elect. Page - F-5 , Item - 2(b)(XIV)
2
-
110
... More
SUB TOTAL FOR PART -C INCLUSIVE OF GST
1
-
139318.74
... More
Supply of 150 mm nominal size (PD) ISI marked sluice valve pressure designation PN 1.6 with hand wheel for water works purpose, CI flange type conforming to IS:14846/2000 with amendments nos. 1 & 2 components/parts of sluice valves shall be manufactured from basic materials given in table 1 of IS:14846/2000 with amendments 1 & 2. The valves should be tested for (closed end test) against Hydrostatic test requirement. Accepted Rate from Resources Circle [ NIT OF 19-20 ]
4
-
7717
... More
Earth work in filling in trenches after laying pipe lines (PVC, RCC, ACP etc.) with good earth obtained from excavation of field trenches in layers not exceeding 225 mm, including watering and ramming etc. layer by layer complete. (Payment will be made on the basis of measurement of finished .quantity of work.)
WRDD Page - 14 , Item -2.10.2
232.5
-
66.01
... More
SUB TOTAL FOR PART -H INCLUSIVE OF GST
1
-
329754.49
... More
PART-G : Transportation of Drilling Pipe 300 mm and 200 mm OD
-
-
-
... More
Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof. (a) upto 150 mm. thick PWD Page - 10 , Item - 2
2.5
-
939
... More
(iii) 200 mm NB Blank pipe
51
-
235.74
... More
Earth work in filling in trenches after laying pipe lines (PVC, RCC, ACP etc.) with good earth obtained from excavation of field trenches in layers not exceeding 225 mm, including watering and ramming etc. layer by layer complete. (Payment will be made on the basis of measurement of finished .quantity of work.)
WRDD Page - 14 , Item -2.10.2
85
-
66.01
... More
Supply of gravel for use as pack in tube well of 2 mm to 4 mm.size (as per IS: 4097) and gravel treatment of tubewell including screening, washing, cleaning etc. of the gravels at the site, all complete as per direction of the Engineer-in-Charge.
i) For sites within 4 Km. from all weather metal road
WRDD Page - 1 , Item - 4
32
-
2699
... More
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts.
long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia
x 80 mm long GI bolts, double nuts, double washers incl. S &
F 15 mm dia GI pipe protection (1 Mts. long) to be filled with
bitumen partly under the ground level and partly above ground
level driven to an average depth of 3.65 Mts. below the ground
level as below:
By ISI-Medium GI pipe
PWD Elect. Page - G-1 , Item - 2 (a)
2
-
1369
... More
Brick work with 1st class bricks in cement mortar (1:6)
a) In foundation and plinth
PWD Page - 15 , Item - 8 [3RD CORR. P - 1 , S - 4]
1.8
-
4952
... More
(v) 75 mm width × 10 mm thick Sockets / Rings made form MS Flats by rolling process and double butt welding for jointing 200 mm NB Pipe.
14
-
429.04
... More
Taking out the damaged R.C.C. Pipe and two collars by dismantling two joints carefully, carrying and stacking the same near the pump house, carrying new pipe and collars from the field stack, lowering the same within the trench, properly positioning and levelling on bricks laid flat, between collar and the pipe joints with jute braiding dipped in cement slurry, grouting with cement and sand mortar (1:2) mixed with approved quality water proofing compound (5% by weight of cement) and curing all complete as per direction of Engineer-inCharge.
(c) 225 mm dia. RC.C. Pipe.
WRDD Page - 19 , Item -2.30.9
10
-
115.98
... More
SUB TOTAL FOR PART -B
1
-
177242.37
... More
Labour Welfare Cess @ 1%
1
-
1
... More
TOTAL FOR PART -H
1
-
330539.05
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements