Water Resources Development Directorate Tender

... More
The WRDD has issued a formal invitation for competitive bids for the Water Resources Development Directorate project, for Re-excavation Of 03 (three) Number Of Wds Including Installation Of Solar Operated Sprinkler Irrigation System At Different Mouzas Under Jamuria Block Under Burdwan (a-m) Division Under Core Sector Programme in Purba Bardhaman, West Bengal, with an estimated contract value of Rs. 53,74,481. The bid opening date for this tender is 14-10-2026 and the last date for bid submission is 17-11-2026. Interested bidders for Water Resources Development Directorate tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Water Resources Development Directorate - WRDD Tender - WB Tender

Opening Date14 Oct 2026
Closing Soon17 Nov 2026
Tender Amount₹ 53,74,481 
Notes
Download

Costs

Summary

Re-excavation Of 03 (three) Number Of Wds Including Installation Of Solar Operated Sprinkler Irrigation System At Different Mouzas Under Jamuria Block Under Burdwan (a-m) Division Under Core Sector Programme

Description

Re-excavation Of Bor Thakruni Pukur Wds At Mouza- Chinchuria, Block- Jamuria, In The District Of Paschim Burdwan Under Burdwan (am) Division Under Core Sector Program

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
Earthwork in excavation in the canals / drainage channels / borrow pits /River bed / slope of bank as noted below as per designed section & throwing the spoils in layers of 25 cm. for making banks as per profile or to deposit the same in any other place within an initial lead of 30 metre and initial lift of 1.5 metre including breaking clods, rough dressing etc. complete as per direction of the Engineer-in-charge. (b) Gravel / moorum / kankar / compact moorum / very much weather rock / sticky soil mixed with moorum / soil mixed with Shingles. (3% of Total Earth Work)

626.499

124

77685.88

... More
Extra rate over Item Nos.1.01, 1.02 & 1.03 for all kinds of soil for every additional lift of 1.50 metre or part thereof beyond the initial lift of 1.50 metre.

8795.292

12

105543.5

... More
Extra rate over Item Nos.1.01, 1.02 & 1.03 for all kinds of soil for every additional lead of 30 metres or part thereof beyond the initial lead of 30 metres. Prop. Lead (30 % Volume Total Excavated Earth) upto 30 m.

6264.996

-

-

... More
Extra rate over Item Nos.1.01, 1.02 & 1.03 for all kinds of soil for every additional lead of 30 metres or part thereof beyond the initial lead of 30 metres. Prop. Lead (30 % Volume Total Excavated Earth) 61 m. to 90 m.

6264.996

24

150359.9

... More
Extra rate over Item Nos.1.01, 1.02 & 1.03 for all kinds of soil for every additional lead of 30 metres or part thereof beyond the initial lead of 30 metres. Prop. Lead (20 % Volume Total Excavated Earth) 150m to 180 m.

4176.664

60

250599.84

... More
Extra rate over Item Nos.1.01, 1.02 & 1.03 for all kinds of soil for every additional lead of 30 metres or part thereof beyond the initial lead of 30 metres. Prop. Lead (20 % Volume Total Excavated Earth) 450 m to 480 m

4176.664

180

751799.52

... More
For Construction of Inlet & Outlet Structure

-

-

-

... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

29.844

283

8465.55

... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

5.658

2314

13094.76

... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources).

11.898

8585

102152.54

... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand).

18.795

7772

146083.01

... More
Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/ spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. 600 mm dia RCC pipes.

40

3706

148262

... More
Construction of Display Board

-

-

-

... More
Supplying, fitting and fixing including transportation of sign board for identifying the exact location of MINI RLI scheme (one at road side and other at site) the board will be made 3 mm thick MS plate of size 300 mm x 600 mm and fitted and fixed on 50 mm GI Pipe of IS 1239/90 (part-1) including cutting, welding LS 3,677.51 and writting of both sides of Sign board. Base - Yellow, and words - Red. Both bottom end of the stands pipe will be grouted in 1:2:4 CC on a single brick flat soling. This will include one materials and labour complete as per drawing and direction of E.I.C.

1

3677

3677.51

... More
Estimate for Performing activities for Institutional development by formation and subsequent strengthening of registered WUA through creation of mass awareness and capacity building among them to achieve success and sustainability of M.I. Sub Project.

-

-

-

... More
Campaigning in the command area of one no WHT/WHR/RWHT/WDS Sub-Projects by community workers for mass awareness, capacity building to achieve sustainability of Sub-Projects. Cost include wage payment to community workers, transportation, leaflet etc.

1

1000

1000

... More
Demarcation of command area selection of beneficiaries and preparation of land schedule within the Command area of one no WHT/WHR/RWHT/WDS having CCA 05 Ha.

1

700

700

... More
Meeting cost of WUA formation cost including Refreshment, training materials, transport local conveyance, wage payment to community worker, remuneration to resource person and incidental charges.

1

1000

1000

... More
Registration Cost for WUA under suitable act(Society) deed writing including registration charge, conveyance cost & opening of Bank A/C etc.

1

1200

1200

... More
Livelihood plan / Micro plan formulation cost for minor irrigation scheme, cost including refreshment, training materials, transport local conveyance, wage payment to community worker, remuneration to resource person and incidental charge (rate on meeting).

4

1000

4000

... More
Meeting and onside demonstration for operation & maintenance of scheme, water management and made of collection of water tax building of corpus fund etc.

1

1000

1000

... More
IEC Materials (leaflet, poster, notebook)= 8meetings for Sl-2 and Sl-4.

15

35

525

... More
Documentation Cost for activities of WUA scheme- by still photography, report booklet etc. in both hard and soft copy.

1

500

500

... More
Impect study and monitoring of scheme by site visit of 2 Community workers during 3 years’ period.

9

700

6300

... More
Sprinkler Irrigation System

-

-

-

... More
Solar Module: Supply , transport , installation and commissioning of ISI marked Solar Modules as per following specification: 1. Cell: Indigenous mono crystalline silicon SPV cells 2. Solar Module: Monocrystalline cell with PERC technology / module with bifacial cell. 3. Standards: ISI marked as per IS 14286 and having certification of IEC 61853(1), 61730(1&2), 61710 4.Modules must qualify to IS 170210 (Part 1) 5.Min. Efficiency: 19.5%. 6. Fill factor: More than 75% . 7. Module wattage mismatch in the SPV array: within ±3% 8. Wattage output warranty:Should not be less than 90% at the end of 10 years and 80% at the end of 25 years. 9.The power output of individual PV modules used in the PV array, under STC: minimum 300 Wp. Necessary test certificates also to be supplied. For detail information please see Cl. no. 2.1 of technical specification . b) For 2 HP Off-grid Solar Water Pumping System with Monocrystalline/ Monocrystalline PERC/bifacial SPV modules - 2150- 2400 Wp.

2200

32

71038

... More
Module Mounting Structure : Supply , transportation & installation of G.I manual tracking / Fixed structure made of MS hollow sections, pipes, plates, angles etc as per IS:4923, IS:1161/1239, IS:1079/2062, to hold min 300 Wp SPV Module as per drawing and technical specification. The steel structure is to be protected with minimum 80 micron galvanisation(hot dip) and provided with fixed arrangement or dual axis manual tracking arrangement for three times in a day and seasonal tilting to face the sun optimally. The approximate weight of the Module Mounting Structure given in Clause no.5.1 should be followed.( 1 no. 4 module Fixed str.)

250

157

39250

... More
Foundation of Module Mounting Structure: Suitable and stable Reinforced Cement Concrete foundation for dual axis manual tracking SPV Module structure as per drawing. For 4 module structure

1

17133

17133.21

... More
Power conditioning unit with enclosure : Supply , transport , installation and commissioning of Solar Power conditioning Unit consisting of following components and features: 1) Variable frequency Drive with inbuilt MPPT, voltage range suitable for operating pump-motor set of 1HP to 20 HP, detail mentioned in in Cl.6.1 2) Power input : DC source for 1HP, 2HP and 3HP. 3) Power input : AC / DC source or hybrid for 5HP and above. 4) Incomer: DC MCB 2 Pole 16 amp upto 5 HP, 25 amp for 7.5HP and 10 HP, 40 amp for 15 to 20 HP as per IS/IEC 60947-2 5) Incomer: AC MCB 4 pole 16 amp for 5.0 HP, 25 amp for 7.5HP and 10 HP, 40 amp for 15 to 20 HP as per IS/IEC 60947-2 6) Type II DC SPD of 40 KA. 7) Type II AC SPD of 40 KA for AC/ DC or Hybrid input. 8) Dual input (solar/Grid) 25 amp changeover switch for 5HP and 7.5 HP, 40 amp for 10 HP, 63 amp for 15 to 20 HP 9) Reverse protection diode 1600 VDC with heat sink. 10) Data Logger. 11) Remote monitoring system. 12) Should have built –in EMC filters . 13)IP 65 glands for cable in and out. 14) Min. IP 54 enclosure. For detail features, protections, RMS, Communication architecture, Security, Data storage, tolerance of various parameters, standards to be qualified, etc. please refer to Cl. 6.1 of technical qualification. Note: AC SPD, AC MCB and Selector switch to be provided only for item no. 3(g), to 3(l)." b) For 2 HP capacity Pump-motor set with DC input

1

32097

32097

... More
Cable and Accessories : Supplying, fitting and fixings of UV rated Copper Cable laid inside HDPE conduit and other accessories as per followings with necessary connection with the Solar PV Module, MPPT etc. i. 4.0 Sq mm single core multi studs - 5m(for 1HP/2HP/3HP) & 20m(for 5/7.5/10/15/17.5/20 HP) ii. Lugs, HDPE Pipe, Flexible Pipe, Saddle, Cable tie etc b) For 2 or more structure per structure with 9m distance between sturctures.

1

3434

3434

... More
Earthing: Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe including excavation of soil for installation of Earth Electrode and filling & ramming and connecting to individual structure to earth electrode including S&F 20 mm x 3 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

1

2661

2661

... More
Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of 8 swg on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages

20

13

260

... More
a) Lighting System at Scheme: (with lighting Pole) : Dusk to dawn lighting arrangement of at 4 mts height above ground level, with Hot dip galvanised 80 mm x 50 mm , medium duty pipe, with 12 V, 15Ah 2-in-1 Lithium ion/ Ferro- Phosphate battery with in-built 7-11watt LED lamp , 50 Wp solar panel (min 19% Eff.) to cover the scheme area. The lighting system should be warranted for 5years from the date of installation.

3

19030

57090

... More
a) Lightning protection (Pole mounted): Lightning protection with 1.5" G.I pipe of 4 mts + 0.75 mts height with base flange in proper RCC foundation and S & F Lightning Conductor Air Terminal made of 20 mm dia 1000 mm long GI pipe (ISI Medium) having five discharge prongs of 4 SWG GI (Hot Dip) wire at top duly soldered with 7/16 stranded GI (Hot Dip) wire and 85 mm dia 6 mm thick GI base plate at bottom incl. necessary holes etc. Earthing with 65 mm dia GI pipe (Medium) 3.0 Mts. long and 1 x 19/10 stranded GI (Hot Dip) wire (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including socketing at both ends of stranded GI (Hot Dip) wire by crimping sockets/ thimbles and S & F 65 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts. (Provision of one lightning protection for each structure)

1

6725

6725

... More
Supply and installation of 3 phase AC electromotor pump-motor set with speed of 3000 r.p.m(synchronous speed) suitable for Solar applications and shall have 60 months guarantee for the following conditions including loading, unloading, transportation etc.:- (Refer technical specification for more detail) b) 2 HP 3 phase Monoblock Pump-motor having discharge at required head as below::- i) 2 HP 3 phase AC surface mounted Monoblock Pump-motor set as per IS 9079 with 2.60 - 2.78 Lps discharge at 26 mts. total head suitable for 2.0 Ha CCA Sprinkler / Drip operation with foot valve, required quantity of flexible suction pipe(15m), clamps, bend, footvalves and all other accessories to complete connection of suction and delivery side .

1

28284

28284

... More
Testing and commissioning of scheme after completion of all work

1

2000

2000

... More
a) Supply, fitting and Fixing of Pump-motor shed of height 0.85m(as per drawing) with Hot dip Galvanised ISA 25X25x3 & 1.5mm MS sheet including foundation Base of 0.95m x 0.65m for Pump Unit ( BFS, .075mm 1:2:4 PCC, 100mm 1:1.5:3 CC) - For 2HP and 3HP surface pump.

1

4965

4965

... More
Comprehensive maintenance charges for 5 years (which cover monthly inspection, Yearly training to WUA, to attend breakdown within 3 days and to keep the scheme in operation without lapse of time) b) For 3 HP both for Submersible & Surface pump Note:1 Total comprehensive maintenance charge is to be withheld in addition to Securirty Deposit. Comprehensive maintenance charges will be released @ i) Rs 0.80 for 2 HP, ii) Rs.0.80 for 3 HP, iii) Rs.0.60 for 5 HP / 7.5/ 10 HP / 15HP / 17.5HP and 20 HP Submersible & Surface per Wp per year at the end of each maintenance period i.e.at the end of 1st year, 2nd year, 3rd year, 4th year& 5th year. In case the “Bidder” does not provide service during the warranty & comprehensive maintenance period, the amount so held up will be forfeited

2200

4

8800

... More
Insurance @ 2% for Item No. 1, 4, 8, and 10 for a period of 5 years. Note:2 1st year's Insurance charge is to be paid on production of Original Receipt of premium payment. Remaining 4 years Insurance payment is to be withheld which will be released during 2nd, 3rd , 4th & 5th year on production of Original Receipt of premium payment.

0.02

188509

3770.18

... More
Remote monitoring for 5 years: Provision for remote monitoring for the pumps must be made in the pump controller through an integral arrangement having following basic functions: a. Controller must be assigned with a unique serial number and its live status must be observed remotely on online portal through login credentials. b. Live status must indicate whether controller is ON/ OFF. The parameters i.e. the water output, water flow rate, in fault condition, array input voltage/ current, power and motor frequency should at logged at an interval of 10 minutes c. Controller must have a back up to store the data locally ( at least for 1 year) supply & installation of GSM/GPRS based Data Transmitter or Modem and to provide remote monitoring service to transmit the parameters to central server from the solar pumping system with time stamp at user-defined interval and report generation at the buyer end. (Refer Technical Spec.)

1

21850

21850

... More
Cleaning and washing of modules once in a month with clear water to remove deposited dust and dirt on the module surface and keep the modules clean throughout the year. The activity to be performed for eight months in a year excluding four monsoon months. A log book should be maintained at thr site for the said purpose.

40

300

12000

... More
ESTIMATE FOR PROCUREMENT OF SPRINKLER IRRIGATION COMPONENT

-

-

-

... More
Supplying, Fittings & Fixing of Metal Impact Sprinkler as per IS 12232. (i)QRC HDPE Pump connecting nipple 63mm IS : 14151 Part-II

1

243

243

... More
Supplying, Fittings & Fixing of Quick Connect Pipe (Metal Latch Type),as per IS-14151 (i)HDPE Pipe with Quick Release Coupler(Pipe of Class-II, 3.2Kg/cm2) IS :14151 Part-I 63mm dia.& 6m long

41

762

31242

... More
Supplying , Fittings & Fixing of Quick Connect Tee (Metal Latch)as per IS -14151 (i)HDPE Tee with coupler (63mm)IS -14151 (Part-II)

1

412

412

... More
Supplying , Fittings & Fixing of Quick Connect Tee (Metal Latch)as per IS-14151 (i)HDPE Bend with coupler 90 degree (63mm)IS -14151 (Part-II)

1

280

280

... More
Supplying, Fittings & Fixing of Metal Impact Sprinkler as per IS 12232 Supplying , Fittings & Fixing of Quick Connect Tee (Metal Latch)as per IS-14151 (i)HDPE End Plug (63mm)IS -14151 (Part-II)

2

118

236

... More
Supplying , Fittings & Fixing of Quick Connect Service Saddle (Metal Latch) as per IS -14151 (i)HDPE 63mm service saddle.IS -14151 (Part-II)

9

435

3915

... More
Supplying , Fittings & Fixing of Quick Connect End Riser of approved make and quality all complete as per direction of Engineer in charge (ii)End Riser Pipe 3/4" diameter x 100 cm

9

197

1773

... More
Supplying, Fittings & Fixing of Metal Impact Sprinkler as per IS 12232 (i)Sprinkler Nozzles Full Circle (1.7 to 2.8 kg 1cm2) 12m to 18m Radius of throw,2050 LPH Discharge IS-12232 (Part-I)

9

691

6219

... More
CONSTRUCTION OF STEPPED GHAT

-

-

-

... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m, as directed by Engineer-in-Charge. — All kinds of soil.

5.184

193

1002.74

... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

3.251

2314

7524.05

... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : — 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources).

16.776

8585

144033.2

... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

5.246

12538

65775.55

... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. — Thermo-Mechanically Treated bars of grade Fe-500D or more.

247.3

117

29065.17

... More
Centering and shuttering including strutting, propping etc. and removal of form for — Stairs, (excluding landings) except spiral-staircases.

18.79

833

15663.53

... More
Centering and shuttering including strutting, propping etc. and removal of form for — Suspended floors, roofs, landings, balconies and access platform.

10.5

1010

10610.04

... More
Centering and shuttering including strutting, propping etc. and removal of form for — Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

9

918

8263.08

... More
Extra for rendering smooth the top of suspended floors, landings and staircases (treads and risers) with cement mortar 1:2 (1 cement : 2 coarse sand), including a floating coat of neat cement and protecting the surface with a layer of 7.5 cm of earth laid over 15 mm of fine sand in case of suspended floor and bricks laid in mud mortar in case of landings and steps, including subsequent removal and cleaning of the same.

30.9

164

5067.91

... More
Add GST @ 18% (For Sl No 1.01 To 7.09)

1

700167

700167.65

... More
Add CESS@ 1% (For Sl No 1.01 To 8)

1

46071

46071.22



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.