Water Resources Development Directorate Tender

... More
The WRDD has issued a formal invitation for competitive bids for the Water Resources Development Directorate project, for Installation Of 02 Nos. New Major Rli Scheme At Chattrasal And Jagannathpur Mouzas In Khanakul-i Block Under Chinsurah (a-m) Division Under Core-sector Programme in Hooghly, West Bengal, with an estimated contract value of Rs. 85,64,367. The bid opening date for this tender is 28-10-2026 and the last date for bid submission is 25-11-2026. Interested bidders for Water Resources Development Directorate tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Water Resources Development Directorate - WRDD Tender - WB Tender

Opening Date28 Oct 2026
Closing Date25 Nov 2026
Tender Amount₹ 85,64,367 
Notes
Download

Costs

Summary

Installation Of 02 Nos. New Major Rli Scheme At Chattrasal And Jagannathpur Mouzas In Khanakul-i Block Under Chinsurah (a-m) Division Under Core-sector Programme

Description

Installation Of New Jagannathpur Ghat Major Rli Scheme At Jagannathpur Mouza In Khanakul-i Block Of Hooghly District Under Executive Engineer (a-m), Chinsurah (a-m) Division Under Core-sector Programme.

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
Supply of 140 mm dia P.V.C. Pipe(Cl-II) with Coupler (Class-II) As per IS 4985:2000 with latest amendments

18

552

9936

... More
Supply of 315 mm dia F.T.P. as per IS-10124/2009 and shall be duly marked with standard ISI certification marks & class Class-II (0.40 MPA)

4

4690

18760

... More
Supply of 200 mm dia F.T.P. as per IS-10124/2009 and shall be duly marked with standard ISI certification marks & class Class-II (0.40 MPA)

6

1565

9390

... More
Supply of 160 mm dia F.T.P. as per IS-10124/2009 and shall be duly marked with standard ISI certification marks & class Class-II (0.40 MPA)

27

790

21330

... More
Supply of 160 X 140 mm P.V.C. Reducer (Class-II) as per IS-10124/2009 and shall be duly marked with standard ISI certification marks & class Class-II (0.40 MPA)

25

383

9575

... More
Supply of 200 X 140 mm P.V.C. Reducer (Class-II) as per IS-10124/2009 and shall be duly marked with standard ISI certification marks & class Class-II (0.40 MPA)

20

944

18880

... More
Supply of 200 X 160 mm P.V.C. Reducer (Class-II)

6

833

4998

... More
Supply of 200 X 60º P.V.C. Bend s per IS-10124/2009 and shall be duly marked with standard ISI certification marks & class Class-II (0.40 MPA)

3

2094

6282

... More
Supply of 140 mm dia P.V.C. End Cap(Cl-III)

2

314

628

... More
Supply of 315 mm dia P.V.C.Extra Coupler (Class-II)

10

1386

13860

... More
Supply of 160 mm dia P.V.C.Extra Coupler (Class-II)

6

256

1536

... More
Supply of 140 mm dia P.V.C.Extra Coupler (Class-II)

150

128

19200

... More
315 mm Dia 60 degree Bend

2

7418

14836

... More
Supply of Solvent Cement(Exra)

15

432

6480

... More
Supply of Quadrupped Set for Major RLI Scheme

1

985000

985000

... More
Supply of 150 mm dia C.I. Sluice Valve as per IS 14846(ISI MARKED)

11

11000

121000

... More
Supply of 150 mm dia NB Foot Valve (Flanged type) lS -4038 / 1986

2

5000

10000

... More
Supply of 150 mm dia Alfa Alfa type Valve (C type)

25

4400

110000

... More
Supply & transportation of MS Shore manifold with painting made of 350 mm dia MS ERW pipe 900 mm long having 1 numbers of 300 mm dia inlet and 2 nos of 150 mm dia outlet all end flanged welded , MS ERW Pipe conferming to IS 1239(Part-I)/3589 Medium and MS Flanged conferming to IS 6392/719tABLE 17) , Flanged thickness of 300 & 150 mm dia 19 mm thick +3 mm of raised surface.

2

25443

50886

... More
150 mm Dia CI non-return valve both end Flanged & swing type with side bypass arrangement as per IS5312(Part-I)/2000

2

13790

27580

... More
Supply of 90 degree G.I Bend (both end flanged-ISI marked-IS 1239,Galv- IS4736 150 mm dia long bend (with priming)

2

9440

18880

... More
Supply of C.I. Flanged Tail piece/Nipple 150 mm dia.Tail piece one end flanged other end grooved.

8

1450

11600

... More
Supply of Foundation Bolt For Distrubution Chamber

44

223

9812

... More
Supply of Foundation Bolt For Diesel Engine Pump Sets

8

223

1784

... More
Supply of Nuts & Bolts M 20x80 mm.

80

176

14080

... More
Supply of Nuts & Bolts M 20x100 mm.

26

176

4576

... More
Supply of Nuts & Bolts M.16x65 mm

30

176

5280

... More
Electro Motor Pump set, both having ISI Marked, IS-12615 & IS-6595; Monoblock as per IS-9079(read with latest ammendment for all IS) a )200 m3/hr, 24 m head. (25HP)

2

262806

525612

... More
Switch Fuse Unit, lSI marked, IS 60947 -63 Amps 415 volts A.C TPN Main Switch. (ISI Marked)

2

7997

15994

... More
Switch Fuse Unit, Confirming to IS 60947 -200 Amps 415 volts A.C TPN Main Switch.

1

20325

20325

... More
25 HP 3φ Electromagnetic Star-Delta motor controllers with 4 pole heavy duty Power contactor, single phasing preventer and normal protective features, MCB, Indicators, push buttons, Ammeter &Voltmeter, all in IP54 enclosure of min 16swg. C R sheet steel,10 tank process powder coat painted and as pestechnical specification.

2

34775

69550

... More
Bus Bar Chambers (As per appvd. existing dwg)-IS60947 -200Amp

1

9600

9600

... More
50 square mm, 3.5 core Aluminium PVC insulated (Heavy Duty) armoured electric cable duly ISI certification mark as per IS 7098/1988

100

695

69500

... More
3C Flat water proof CU.cables lSI marked-IS 694 3CX 10 sq. mm

60

739

44340

... More
3C Flat water proof CU.cables lSI marked-IS 694 3CX6 sq. mm

60

434

26040

... More
Compresed Asbestos fibre jointing for Quadruped & Tripod set (for raised surface of Flange as per IS-6392) 500 mm.dia (Table-5)

6

1218

7308

... More
150 mm dia Foot Valve Leather Washer

2

310

620

... More
Rubber Insertion (for raised surface of Flange as per IS-6392) 300 mm.dia( Table-11)

10

289

2890

... More
200 mm.dia( Table-11)

20

176

3520

... More
200 mm.dia( Table-5)

12

176

2112

... More
150 mm.dia( Table -17)

100

167

16700

... More
150 mm.dia( Table -5)

24

167

4008

... More
80 mm.dia( Table -17)

2

85

170

... More
Laying of WTA

-

-

-

... More
Earthwork in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite and sand stone), including removing, spreading or stacking the spoils, within a lead of 75 m as directed.The item includes necessary trimming the sides of trenches, levelling,dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1500 mm.

26.33

260

6853.7

... More
Earthwork in excavation in the canals / drainage channels / borrow pits / River bed / slope of bank as noted below as per designed section & throwing the spoils in layers of 25 cm. for making banks as per profile or to deposit the same in any other place within an initial lead of 30 metre and initial lift of 1.5 metre including breaking clods, rough dressing etc. complete as per direction of the Engineer-in-charge. (a) Ordinary soil / local soil / soil mixed with moorum or kankar / silt, dry or moist / slushy silt / sticky soil.

3182.08

109

346846.72

... More
Laying of PVC pipes of different diameters within field trenches in curve/ straight line including using UPVC fittings, Viz. Horizontal and Vertical Bends, riser pipes, Tee Reducer etc.and making leak proof joints with couplers after roghening the surface with wire brush and emery paper and applying solvent cement (The rate is inclusive of transport of pipesfittigs and solvent cement to be supplied by deptt.) all complete asper direction of Engineer-In- charge. i)315 mm.dia

1698

11

19221.36

... More
ii)200 mm. dia

1200

10

13008

... More
iii)140 mm. dia

2502

10

25370.28

... More
Earth work in filling in trenches after laying pipe lines (PVC, RCC, ACP etc.) with good earth obtained from excavation of field trenches in layers not exceeding 225 mm, including watering and ramming etc. layer by layer complete. (Payment will be made on the basis of measurement of finished quantity of work.)

2972.58

66

196220.01

... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

10.23

2123

21725.96

... More
Single brick flat soling of picked Jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand.

73.59

357

26271.63

... More
1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

9.8

7878

77209.3

... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

2.39

9045

21619.34

... More
Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns

41.89

392

16427.16

... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Mild steel and Medium Tensile steel bars

90

107

9639

... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand)

2.44

7132

17402.69

... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand)

14.82

9105

134950.18

... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : cement mortar 1:4 (1 cement : 4 coarse sand)

27

905

24436.35

... More
15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand)

231.62

395

91570.97

... More
Neat cement punning about 1.5 mm. thick in wall dado, floor, drain, door and window sill etc. complete.

231.62

79

18518.02

... More
Fitting and fixing of M.S. I G.I. I C.l.accessories and special in pipe line (accessories & special to be supplied departmentally) including supply of jointing materials viz.rubber insertion, nuts & bolts, havoc Zink (Zink Oxide) complete as per direction of Engineer-in-Charge. (iv) 150mm. dia. C.1.sluice valve

11

54

601.59

... More
Labour charges for fitting and fixing and laying , where necessary of fowlling M.S/G.I. /E.R.W pipes and accessories (to be supplied deparmentally) including transportation of the same cutting, threading, jointing & making leak proof threaded / flanged joints at site, by using scoket/ rubber insertion, nuts and bolts etc., maintaing the proper alignment and level / all complete / as per direction of E-I-C. (a) 150 mmm dia E.R.W Pipe.

60

134

8090.4

... More
Erection, fitting and fixing set of M.S Quadrupped inlet and outlet pipe fittings for Ist chamber and 2nd chamber of Major RLI scheme.(Rate inclusive of transportation from Deptt. Store to work site).

1

29920

29920.75

... More
Supplying, fitting and fixing including transportation of sign board for identifing the exact location of Major RLI scheme ( one at rode side and other at site) the board will be made 3 mm thick MS plate of 300 mm X 600 mm and fitted and fixed on 50 mm GI Pipe of IS 1239/90 (part-I) including cutting, welding and writting of both sides of Sign board. Base - Yellow, and ward - Red. Both bottom end of the stands pipe will be grouted in 1:2:4 CC on a single brick flat soilng. This will include one materials and labour complite as per drawing and direction of EIC.

1

3677

3677.51

... More
Placing and positioning the Centrifugal pump motor set on the pump base / pump house floor, aligning properly with necessary packing and fixing the set with holding down nuts and washer including cutting holes of requisite size in the floor / base, grouting the bolts and mending good all damages complete as per direction of the Engineer-in-Charge.

2

644

1289.96

... More
Installation / Erection of SurgeTank / Shore manifold (to be supplied from Deptt. free of cost) over a rigid base of cement concrete (1`:2:4) with stone chips 20mm. down of 1250 mm X 1250 mm X 150 mm. over a single layer of brick flat soling and embedding the legs of the surge tank/shore manifold within the concrete base including cost of all materials and labour and as per direction of Engineer-in-Charge.

2

2263

4526.16

... More
Labour charges for fitting and fixing 150 mm. diaAlfa Alfa G type valve with 140 mm. dia class-II U.P.V.C riser pipe with the help of flanged P.V.C tail piece by joining the P.V.C end of Tail piece and riser pipe with coupler and flanged end of tail piece and flap valve with rubber insertion , nuts and bolts etc. complete.

25

112

2805.25

... More
Testing of pipe line system against leakage by fillinh the distribution chamber with water and supplying water through the entire pipe line net work for atleast4 (Four) hours including hiring and transport of suitable generstor , pump , tools and plants, fuel and lubricants and installation of the pump connecting the same with pipe line network making necessary electrical connection and dismantling all these after completion of test all complete as per direction of Engineer -In -Charge.

1

4987

4987.26

... More
Carriage charge on every item from Sl. no-3a,3b,3c,6,13,16,17,18,20,21)

1

5244

5244.22

... More
Cost indices of Purba Bardhaman as on 01.10.2025 based on DPAR 2025 (Base 100) is 109 as per Office Memoramdum vide Memo No.- 34(1)/SDG(Kol)/Cost Index/2026/915, dated - 19.05.2026 of CPWD, Government of India. Hence the total cost of the scheme is - [[{(Total Amount of sl no 2.01 to 2.27- Item No.- 2,3,4,6,16,17,18,19,20,21,22,23) x 0.973}x1.09] + (Cost of Item No.-2,3,4,6,16,17,18,19,20,21,22,23)]-Total Amount of sl no 2.01 to 2.27 amount

1

26672

26672.16

... More
Add GST 18% on item no 2,3,4,6,16,17,18,19,20,21,22,23

1

123854

123854.6

... More
Add Cess 1% on item no 2,3,4,6,13,16,17,18,19,20,21,22,23 & 2.29

1

8119

8119.36

... More
Construction of Pump House

-

-

-

... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m All kinds of soil.

21.19

260

5515.76

... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

7.35

2123

15609.56

... More
Single brick flat soling of picked Jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

45.9

357

16386.3

... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :. 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

3.56

7878

28047.46

... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

3.02

9045

27318.17

... More
Reinforced cement concrete work in beams,suspended foor,roof ,having slope upto 15 landing balconies,shelves,chajjas,lintels,bands,plain windows sills,staircaese,and spiral stair cases abobve plinth level upto floor five level excluding cost of centering ,shuttering,finishing and reinforcement: 1:1.5:3 (1 cement : 1.5 coarse sand ( zone III ) derived from natural sources : 3 graded stone aggregate 20 mm nominal sizes derived from natural sources .)

5.51

11505

63395.31

... More
Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns

7.81

392

3062.69

... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers.

23.47

736

17283.31

... More
For Suspended Floor,Roof Landings,balconies and access platform

23.86

927

22124.19

... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Mild steel and Medium Tensile steel bars

669.6

107

71714.16

... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand)

10.51

7132

74959.95

... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand)

15.46

9105

140777.99

... More
15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand) b) 15 mm thick with 1:6 cement mortar.

82.793

395

32732.21

... More
b)20 mm thick with 1:6 cement mortar.

96.82

466

45122.96

... More
12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)

21.24

357

7590.11

... More
25mm. thick damp proof course with cement concrete with stone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound as per manufacturer's specification followed by two coat of polymer based paint, (1st coat after 4 to 5 days of concrete laying and 2 nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer based paint to be paid separately).( Chequering not required over concrete or painted surface). [Note: - Waterproofing as per item 9, polymer based paint as per item 8 (a) of subhead C of Section (C).

6.98

190

1326.2

... More
Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor.3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement).Using grey cement(ii) 25 mm. thick

50.2

261

13102.2

... More
Neat cement punning.

44.74

79

3576.96

... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding

299

219

65510.9

... More
Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials.

10.4

1304

13561.6

... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter

6

248

1492.8

... More
Single tee without door. 75x75x75 mm

2

144

288.6

... More
Bend 87.5° 75 mm bend

2

105

211.8

... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all.

14.85

196

2910.6

... More
Applying priming coat:. With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works.

32

67

2156.8

... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work.

32

155

4988.8

... More
White washing with lime to give an even shade : New work (three or more coats)

95.19

39

3717.17

... More
Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm)

94.5

116

11047.05

... More
Suppling 1 mtr x 0.6 m x 24 swg MS board contaning list of spout wise water users by making numbers of spout as directed by EIC. The board should have base colour - Black and words - White to be fitted and fixed on the wall of the pump house.

1

942

942.95

... More
Add 4% carriage on item no- 3.03, 3.16,3.17,3.20 & 3.29

1

1812

1812.77

... More
Cost indices of Purba Bardhaman as on 01.10.2025 based on DPAR 2025 (Base 100) is 109 as per Office Memoramdum vide Memo No.- 34(1)/SDG(Kol)/Cost Index/2026/915, dated - 19.05.2026 of CPWD, Government of India. Hence the total cost of the scheme is - [[{(Total Amount from 3.01 to 3.30- Item No.- 3,16,17,20 & 27 ) x 0.973}x1.09] + (Cost of Item No.-3,16,17,20 & 27)]-Total Amount from 3.01 to 3.30

1

39440

39440.49

... More
Add GST 18% on Item No 3.03,3.16,3.17,3.20 ,3.27,3.29 & 3.30

1

8483

8483.76

... More
Add Cess 1% on Item No 3.03,3.16,3.17,3.20 ,3.27,3.29,3.30 & 3.32

1

556

556.16

... More
Internal Wiring of Pump House

-

-

-

... More
Supplying,fitting & fixing of M.S. angle (Size: 50 mm x 50 mm x 6 mm) including gas cutting etc.

10

238

2385.7

... More
Supplying, fitting & fixing 350 mm x 250 mm x 25 mm size Wooden Plank on wall I(for fitting & fixing of electrial equipments as necessary on the plank).

20

413

8260.2

... More
Supply, Fitting & fixing of DPIC main switch 15/16A 240 Volts (Havells) on board on wall including mending good the damage for light circuit of pump house

1

576

576

... More
Supplying & Fixing bulk head light fitting (Havells make) with die cast aluminium housing & frosted glass on wall/ceiling incl. S&F 8watt CFL / 100 watts GLS lamp complete set

2

579

1158

... More
Supply & Fixing of 20 watt single / twin florescent light fitting complete with all accessories directly on wall / ceilling / TW round block and suitable size of fastener ..

3

35

105

... More
Wiring from 15/16A DPIC main switch to Busbar box in 1.1KV grade single core stranded 'FR' PVC insulated and unsheathed copper wire (Finolex/havells/KDK) of 2 x 36/0.3(2.5 Sq. mm) + 1 x 22/0.3(1.5 Sq. mm) in PVC casing capping (Precision make) including necessary PVC clips,fittings etc incl supply of wire.

2

85

170

... More
Wiring from 15/16A DPIC main switch to BDB in 1.1KV grade single core stranded 'FR' PVC insulated and unsheathed copper wire (Finolex/havells/KDK) with 2X 36/0.3(2.5 Sq. mm) + 1 X 22/0.3(1.5 Sq. mm) in PVC casing capping (Precision make) including necessary PVC clips,fittings etc.incl supply of wire

6

85

510

... More
Distribution wiring in 1.1KV grade 2 x 22/0.3 (1.5 Sq. mm) single core stranded 'FR' PVC insulated and unsheathed copper wire (Finolex/havells/KDK) with 1X22/0.3 (1.5 Sq. mm) single core stranded 'FR' PVC insulated and unsheathed copper wire for ECC, including necessary PVC clips,fittings etc. to light/fan/calling bell with piano key type switch of (Anchore make) fixed on sheet steel fabricated switch board with perspex/ bakelite top cover on wall including necessary connections and making earthing attachments and mending good damages to the building works incl. supply of wire.[PVC casing capping and switch board both on surface] average run 5 meter

6

659

3954

... More
Distribution wiring in 1.1KV grade 2X22/0.3 (1.5 Sq. mm) single core stranded 'FR' PVC insulated and unsheathed copper wire (Finolex/havells/KDK) with 1X22/0.3 (1.5 Sq. mm) single core stranded 'FR' PVC insulated and unsheathed copper wire for ECC, including necessary PVC clips,fittings etc. to 5amps 3 pin flush type plug socket with piano key type switch of (Anchore make) fixed on sheet steel fabricated switch board with perspex/ bakelite top cover on wall including necessary connections and making earthing attachments and mending good damages to the building works.[PVC casing capping and switch board botyh on surface] average run 1.5 meter (PWD elec. Sh. Page-E-22,item- 5(6)

1

478

478

... More
Fitting & fixing of 200A 500 V iron clad/ sheet steel TP/ TPN main switch on iron legs on wall.

1

215

215

... More
Fitting & fixing of 63A 500 V iron clad/ sheet steel TP/ TPN main switch/isolators on iron legs on wall .

2

215

430

... More
Fitting & fixing of only 200A 500V iron clad M.S. sheet metal busbar chamber on angle iron frame on wall for 4 bars 63Amps .( PWD elec. Sh. Page-C-1,item-6 )

1

486

486

... More
Fitting & fixing of Star - Delta starter (for 20 HP motor contol) on angle iron frame on wall . (PWD elec. Sh. Page-C1,item-7(b) )

2

215

430

... More
Fitting & fixing of Volt meter and Ammeter with necessary screws and other fixing materials including making holes where necessary and making connections (PWD elec. Sh. Page-C-2,item-10)

3

57

171

... More
(i) 4Cx 25 sqmm Copper cable conforming to IS 694 in [100/200 A TPN switch to BUS-bar

3

1561

4684.59

... More
(ii) 3C X 16 sqmm copper cable conforming to IS 694 [Busbar to 63 A, TP Main switch and 63 A TP switch to Motor starter]

4

793

3175.84

... More
(iii) 2 X 3C X 10 sqmm copper cable conforming to IS 694 in 32 mm GI conduit (lSI-Medium quality) IfStar-DeltaMotor starter to Motor]

14

926

12976.88

... More
Suppling & fitting & fixing of danger Board (mannual) 4"x6" in two distinguishing position in the door of pump house (outside) and at the palce of panel board.

2

55

110

... More
Earthing with 50 mm (2") dia Galvanized iron pipe(TATA MAKE) 3.64 mm thick X 3.04 mtr.(10ft) long and 1X4 SWG G.I.(Hot Dip) Wire (4 mtr. Long ) 13 mm (1/2") dia X80 mm (3") long G.I. Bolts, double nuts and double washer including S&F 15 mm dia G.I. Pipe protection (1 mtr) long to be fitted with bitumen partly under the ground level and partly above the ground level driven to an average depth of 3.56 mtr. (12") below the ground level and restoring the surface duly rammed for Soft/Morrum soil by ISI-Medium G.I. Pipe

2

1524

3048

... More
Installation of Electro motor pumping set of any make- brand and for RLI scheme on pump foundation over SAL sleeper(to be sublied departmentally) by supllying and fixing nuts and bolts and making connection of suction hose and foot valve with necessary fitting at the enlet end of the water pump and fitting fixing of 90 degree MS priming bend Sluice valve and delevery hose with all necessary fitting at the deevery end of the water pump, duly connected with pipe line maintainig proper allingment and level including cutting holes on the wall and pump base of the pump house where necessary, mainding good damages after complition of the works as per direction of Engineer -In -Charge.(Pump Set and all accessaries will be suplied departmenatally (a) For Major RLi schemes.

2

1446

2892.98

... More
Supplying and fixing earth bar of galvanized M.S. Flat 25 mm × 6 mm on wall having clearance of 6 mm. from wall including providing drilloed holes (on busbar) about 3 cm. apart complete with G.I. bolts, nuts, washers etc. as required for tapping.

0.45

156

70.2

... More
Connecting the equipments to earth busbar including supplying and fixing G.I. Wire No. 8 SWG on wall/floor with stapples burried inside floor/wall as required and making connection to equipments with bolts, nuts, washers, cable, lugs etc. as required and mending good all the damages.

18

9

162

... More
Suppling fitting & fixing of shock treatment chart in a wooden frame with brass. (Passed rate of SE(A-M) Burdwan (A-M) Circle)

1

150

150

... More
Add GST @18% on 4.01 to 4.24

1

8387

8387.89

... More
Add Cess@ 1% on 4.01 to 4.25

1

549

549.87

... More
Carriage of materials from Sub-divisional store to site Loading into truck P.V.C. pipes of 300-200-160-140-110 mm dia 2 to 4 kg/cm2 capacity and average length of 6 metre kept in telescopic arrangement and stacking in godown/site as per direction including carriage by headload within lead of 50 metres.

969

1

986.44

... More
Carriage of P.V.C. pipes of 300-200-160-140-110 mm dia 2 to 4 kg / cm2 capacity and average length of 6 metre kept in telescopic arrangement over Pucca / Kancha road for every 100 m of such pipe upto 100 kilometre. (for 79 KM)

765.51

8

6315.46

... More
Unloading from truck P.V.C. pipes of 300-200-160-140-110 mm dia 2 to 4kg/cm2 capacity and average length of 6 metre kept in telescopic arrangement and stacking in godown/site as per direction including carriage by headload within lead of 50 metres{

969

-

794.58

... More
Labour for loading the following materials into trucks, carts, boats etc. at lifting point and unloading the materials at the destination and stacking the same as per direction including carriage by head load upto a lead of 100 metres at each end.a) ERW / MS Pipe i) 150 mm. dia.

60

11

707.4

... More
Carriage of miscellaneous materials over pucca road upto 5 km.distance (total :25 Km) (i) ERW /MS pipe (a) 150 mm. dia.

60

6

367.8

... More
(b) ERW/MS pipe (total :25 Km) (i) For carriage of 150 mm dia Beyond 5 km and Upto 50 km

27

19

528.39

... More
Add GST 18% on 5.01 TO 5.06

1

1746

1746.15

... More
Add Cess 1% on sub total 5.01 TO 5.07

1

114

114.47

... More
WUA Formation and Registration

-

-

-

... More
Campaigning in the command area of New Major RLI Sub-project by community workers for mass awareness , capacity building to achieve sustainability of Sub-projects. Cost include wage payment to community workers, transportaton, leaflet etc.

4

2600

10400

... More
Demarcation of command area, selection of beneficiaries and preparation of land schedule within the Command area of one New Major RLI having CCA 80 Ha

1

12000

12000

... More
Meeting Cost for WUA formation, cost including Refreshment, training materials, transport local conveyance, wage payment to community worker, remuneration to resource person and incidental charges

3

5500

16500

... More
Registration Cost for WUA under suitable act ( Society ) deed writing including registration charge, conveyance cost & opening of Bank A/C etc.

1

1200

1200

... More
Livelyhood plan / Micro plan formulation cost for minor irrigation scheme, cost including refreshment, training materials, transport local conveyance, wage payment to community worker, remuneration to resource person and incidental charge ( rate on meeting )

5

5500

27500

... More
Meeting and onsite demonstration for operation & maintenance of one New Major RLI tubewell, water manangement and mode of collection of water tax, building of corpus fund etc

3

5000

15000

... More
IEC Materials ( Leaflet, poster, notebook )= 8 meetings, for SL - 6.02 and SL - 6.04

220

35

7700

... More
Documentation Cost for activities of WUA Scheme - by still photography, report booklet etc in both hard and soft copy.

1

2000

2000

... More
Impact study & monitoring of scheme by site visit of 2 Community workers during 3 years' period

10

1200

12000

... More
ENERGISATION: (Meterial Cost) PCC Pole 9 Meter Long

5

10198

50991.4

... More
GI STAY SET HT

11

795

8754.13

... More
G.I. Stay wire 7/3.15 swg

0.066

142310

9392.52

... More
Porcelain Guy Insulator H.T.

11

52

574.64

... More
GI EARTH SPIKE 1833X20MM

10

367

3679.8

... More
G.I. WIRE 5MM.

0.044

136865

6022.1

... More
DTR 63 KVA

1

197568

197568.41

... More
Polymer Pin insulator 11KV

18

243

4388.22

... More
Polymer Disc insulator 11 KV

6

183

1098.9

... More
Hardware fittings FOR 11 KV

6

327

1966.98

... More
1.1XLPE Cable 120 sqmm 4 core

0.032

751027

24032.89

... More
LT KIOSK FOR 63 KVA

1

9441

9441.26

... More
ACSR 50sqmm

0.589

62290

36688.88

... More
D-Iron clamp

1

47

47.83

... More
Shackle insulator

2

23

46.68

... More
Shackle Strap

1

59

59.21

... More
Turn buckle.

2

238

477.4

3

524

1572.69

... More
TPGO Isolator 200 Amps.

1

10384

10384.98

... More
MS Channell 100 x 50 x 6 mm

0.095

109813

10432.33

... More
MS Channell 75 x 40 x 6 mm

0.398

110043

43797.15

... More
MS Angle 65 x 65 x 6 mm

0.278

108667

30209.49

... More
MS Flat 65x6 mm

0.216

117493

25378.65

... More
Labour Cost: Conduction of Physical survey using VM APP

4

31

124

... More
Painting of difgit for unique pole no on pole

48

12

576

... More
Earthing Complete.

10

313

3130

... More
Fixing of Shackle insulator.

2

52

104

... More
Survey of H.T.O.H. line.

0.183

2761

505.26

... More
Service connection charge 3 ph

1

570

570

... More
Erection of Sub-Stn. DP 9Mtr, pcc pole with paint

1

13169

13169

... More
Erection of single pcc pole 9 Mtr. Long HT with paintwith paint

3

2620

7860

... More
Extension of PCC Pole with print

5

1706

8531.9

... More
Erection of stay setcomplete HT

11

641

7051

... More
Fixing of 11 KV Pin insulator.

18

63

1134

... More
Fixing of 11 KV Disc insulator.

6

65

390

... More
Erection of 63 kva DTR

1

2711

2711

... More
Fixing of TPGO Insulator 11 KV

1

1193

1193

... More
Sagging of ACSR 50 sq.mm.X 3 W

0.183

8289

1516.89

... More
Fixing of LT kiosk

1

3012

3012

... More
Earthing for DTR Neutral with materials

1

3816

3816

... More
Fixing of LA

1

339

339

... More
Fixing of Tee-off bracket on SP with Print

1

1510

1510

... More
Supervission Charge @10% (On materials +labour)

1

53424

53424.96

... More
Cess @ 1% on 6.01 to 6.43

1

5876

5876.75

... More
GST @ 18% on Labour Charge and Supervision

1

19920

19920.24

... More
Quotation Money as per WBSEDCL Procedure

1

33932

33932



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.