Water Resources Development Directorate Tender

Power conditioning unit with enclosure:(For 2 Hp capacity Pump-motor set with DC input) Supply , transport , installation and commissioning of Solar Power Conditioning unit consisting of following components and features : (1)Variable frequency drive with inbuilt MPPT, voltage range suitable for operating pump motor set of 1 HP to 20 HP detailed mentioned in clause 6.1. (2)Power input : DC source for 1HP, 2 HP and 3 HP. (3)Power Input : AC/DC source or hybrid for 5 HP and above. (4)Incomer : DC MCB 2 pole 16 amp upto 5.0 HP, 25 amp for 7.5 HP and 10 HP, 40 amp for 15 to 20 HP as per IS / IEC 60947-2. (5)Incomer : AC MCB 4 pole 16 amp upto 5.0 HP, 25 amp for 7.5 HP and 10 HP, 40 amp for 15 to 20 HP as per IS / IEC 60947-2. (6)Type II DC SPD of 40 KA. (7)Type II AC SPD of 40 KA for AC/DC or Hybrid. (8)Dual Input(Solar/Grid) 25 amp changeover switch for 5 Hp and 7.5 Hp, 40 Amp for 10 Hp, 63 amp for 15 to 20 Hp. (9)Reverse protection Diode 1600 VDC with heat sink. (10)Data Logger. (11)Remote Monitoring System. (12)Should have built - in EMC filters. (13)IP 65 glands for cables in and out. (14)Minimum IP 54 enclosured for detail features, protections, RMS, communication architecture, security, data storage, tolerance of various parameters, standards to be qualified etc. please refer to Cl. 6.1 of technical qualification. Note: AC SPD, AC MCB and selector switch to be provided only for item no. 3(f) to 3(I).

Cable and Accessories: Supplying, fitting and fixings of UV rated Copper Cable laid inside HDPE conduit and other accessories as per followings with necessary connection with the Solar PV Module, MPPTetc. I. 4.0 Sq mm single core multi studs - 5 Mtrs (for 1HP/2HP/3HP) II. Lugs,HDPE Pipe,Flexible Pipe, Saddle, Cable tie etc. For 2 HP per structure

Earthing : Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWGGI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S& F 15 mm dia GI pipe protection (1 Mt. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By lSI-Medium GI pipe including excavation of soil for installation of Earth Electrode and filling & ramming and connecting to individual structure to earth electrode including S&F 20 mm x 3 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc complete.

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of 8 swg on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc as required and mending good damages with solid GI wire (No. 6 SWG)

Lighting System at S¢heme: (with lighting Pole) : Dusk to dawn lighting arrangement of at 4 mts height above ground level, with Hot dip galvanised 80 mm x 50 mm , medium duty pipe, wlth 12 V, 15Ah 2-in-I Lithium ion/ Ferro- Phosphate battery with in-built 7-11watt LED lamp , 50 Wp solar panel (Min 19% efficiency) to cover the scheme area. The lighting system should be warranted for 5 years from the date of installation.

Lightning protection (Pole mounted): Lightning protection with 3" X1.5" G.I pipe of 4 mts +0.75 mts height with base flange in proper RCC foundation and S & F Lightning Conductor Air Terminal made of 20 mm dia 1000 mm long GI pipe (lSI Medium) having five discharge prongs of 4 SWG GI (Hot Dip) wire at top duly soldered with 7/16 stranded GI (Hot Dip) wire and 85 mrn dia 6 mm thick GI baseplate at bottom Incl. necessary holes etc. Earthing with 65 mm dia GI pipe (Medium) 3.0 Mts. long and 1 x 19/10 stranded GI (Hot Dip) wire (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including socketing at both ends of stranded GI (Hot Dip) wire by crimping sockets/ thimbles and S& F 65 mm dia GI pipe (lSI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts. (Provision of one lightning protection for each structure).

Supply and installation of 3 phase electromotor pump-motor set suitable for Solar operation covering 5 years warranty for the following conditions including loading, unloading, transportation etc. 2 HP 3 Phase Monoblock Pump Motor having discharge at required head as bellow :- 2 HP ISI marked as per IS 9079 surface mounted Monoblock Pump-motor set with 2.60 - 2.78 Lps discharge at 26 mts. total head suitable for 2.0 Ha CCA Sprinkler / Drip operation with foot valve, required quantity of flexible suction pipe(15m), Clamps, bend. footvalyes and all other accessories to complete connection of suction and delivery side .

Testing and commissioning of scheme after complecion of all work

a) Construction of Pump-motor shed oi height 0.85m(as per drawing) with Hot dip Galvanised ISA 2SX25x3 & 1.5mm MS sheec Including foundation Base of 0.95m x 0.65m for Pump Unit ( BFS, .07Smm 1:2:4 PCC, 100mm 1:1.5:3 CC) - For 2HP and 3HP surface

Comprehensive maintenance charges for 4 years beyond 1 year warranty period (which cover monthly Inspection, Yearly training to WUA, to attend breakdown within 3 days and to keep the scheme in operation without lapse of time)For 2 HP both for Surface pump.Note:1 : Total comprehensive maintenance charge is to be withheld in addition to Securirty Deposit. Comprehensive maintenance charges will be released @ i} Rs 0.80 for 2 He, ii) Rs.0.80 for 3 HP, iiT) Rs.0.60 for 5 IP & 10 HP Submersible & Sunlace per Wp per year at the end of each maintenance period i.e.at the end of tst year, 2nd year, 3rd year, 4th year& Sth year. In case the "Bidder” does not provide servlce during the warranty B comprehensive maintenance period, the amount so held up will be forfeited.

Cleaning and washing of modules once in month with clear water to remove deposited dust and dirt on the module surface and keep the modules clean throughout the year. The activity to be performed for eight months in a year excluding four monsoon months. A log book should be maintained at the site for the said purpose. (16 months in 2 years)

Insurance @ 2% for Item No. 1. 4. 8, and 10 for a period of 5 years. Note : 2 : lst year's insurance charge is to be paid on production of Original Receipt of premium payment. remaining 4 years Insurance payment is to be withheld which will be released during 2nd, 3rd , 4th & Sth year on production of Original Receipt of premium.

Supplying, fitting and fixing including transportation of sign board for identifing the exact location of MINI RLI scheme (one at road side and other at site) the board will be made 3 mm thick MS plate of site 300 mm x 600 mm and fitted and fixed on 50 mm GI Pipe of IS 1239/90 (part-l) including cutting, welding LS and gritting of both sides of Sign board. Base - Yellow, and words - Red. Both bottom end of the stands pipe will be grouted in 1:2:4 CC on a single brick flat soling. This will include one materials and labour complete as per drawing and direction of E.I.C.

Supplying fitting fixing of Metal impact Sprinkler as per IS : 12232, QRC HDPE pump connecting nipple 63 mm IS : 14151(II)

Supplying fitting fixing of quick connect Pipe (metal latch type) 6 m as per IS: 14151, with HDPE pipes with Quick Reaslease Coupler ( pipe class -II;3.2kg/sqcm IS: 14151 Part I 63 mm dia and 6m long.

Supplying fitting fixing of quick connect HDPE Tee with coupler (metal latch type) (63mm) IS: 14151 Part II

Supplying fitting fixing QRC HDPE Bend with coupler 90 degree (63mm)IS: 14151 Part II

Supplying fitting fixing QRC HDPE End Plug(63mm)IS: 14151 Part II

Supplying fitting fixing QRC HDPE 63mm service saddle IS: 14151 Part II

Supplying fitting fixing GI End Riser Pipe UPTO 3/4" dia X 100 cm long.

Supplying fitting fixing of metal impact Sprinkler Nozzles Full Circle (1.7 to 2.8 Kg/cm2). 12-18 m radious of through 2050 LPH discharge IS : 12232, Part -I

Supplying Fitting and fixing of PVC HD reducer as per IS : 7834 (High Density), HD reducer 63 x 40mm

Supplying Fitting and fixing of Screen filter PVC body as per IS : 12785. Screen filter 40 cum/h 2.0 "

Performing activities for Institutional Development by formation and subsequent strengthening of registered WUA through creation of mass awareness and capacity building amoung them to achieve success and sustainability of Sub-Project. (Annexure -I for Details of activities and releated cost thereof enclosed as additional document) .

Add GST for work value of all Item (No 01 to 3) @ 18% .

Add Labour well fare Cess @1% of Gross Bill Value (Item No - 01 to 04).