Public Works Roads Department Tender

Open-Graded Premix Surfacing using Bituminous (Viscosity grade Paving Bitumen / Modified bitumen) Binder and Mobile Hot Mix Plant (Light Duty) Providing, laying and rolling of Open - graded premix surfacing of 20 mm thickness composed of 13.2 mm (@ 0.018 m³ per m²) and 11.2 mm (@ 0.009 m³ per m²) size stone aggregates, including thoroughly cleaning of the surface, screening, cleaning and pre-heating stone chips and fully pre-coating the same either using viscosity grade paving bitumen or cut-back or emulsion, carrying the mixture by any suitable arrangements, laying the mixture uniformly over the surface, including line, grade and level to serve as wearing course on a previously prepared base, including mixing in Mobile Hot Mix Plant (Light Duty) and thoroughly rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades including the cost and carriage of stone chips and matrix, heating the matrix, preheating the aggregates to required temperature and including the hire charges of Mobile Hot Mix Plant (Light Duty) and other machinery, pay of operators, cost of fuel and lubricants etc. complete to be followed by seal coat of either Type A or Type B as per Technical Specification Clause 508 for Rural Roads of MORD.

Providing and laying Premixed Seal Coat (Type B) with approved quality sand/grit @ 0.6 m3/ 100 m2 and bitumen binder on thoroughly cleaned black top surface coated with tack coat, including heating and mixing cleaned sand/grit (100 % passing through 2.36 mm sieve and retained on 180 micron sieve) uniformly with bitumen binder, laying and spreading the mix at an uniform rate using suitable means, brushing the surface, if necessary, to ensure uniformity, followed by rolling with power roller including the cost and carriage of binder and aggregates, cost of heating the binder and aggregates and all other incidental charges, cost of fuel and lubricants, including hire charges of machineries, tools & plants required for construction and quality control complete as per Clause 511 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). By Manual Means With Hot Bitumen Binder (@ 6.80 kg / 10 sqm.)

Protective work with walling with eucallyptus bullah piling 1.5 mtr (average) high and 4.50 mtr long driven 3.00 (av) bellow G.L and 350 mmc/c including fitting and fixing 3 nos Hlf of Eucallyptus pieces (from 10cm dia E/C bullah) including cost of necessary nails, bolts,buts etc. and providing 2.0 mtr to 3.0 mtr long E/C bullah ties of 10 cm dia 2.50 cc fixed with 10 cm dia e/c bullah posts driven from 1.50mtr bellow G.L including cost of all materials and two coats of coal tarring to all E/C bullah etc. complete as direction of E.I.C

Supplying empty Cement bags in good condition and Filling empty Cement bags with earth and placing them in position including tying or sewing mouth (cost of thread included) and all incidental charges complete and including cost of sand/earth and gunny bags.

Goods and Services Tax(GST)@18%

Labour Welfare Cess(LWC)@1%