Public Works Department Tender
... More
The PWD has issued a formal invitation for competitive bids for the Public Works Department project, for Miapur Rob Via Deulti Kanpur To Ajagarpara More On Nh-34 Road From Chainage 0.00 Kmp To 7.10 Km - Improvement Of Riding Quality Work. in Murshidabad, West Bengal, with an estimated contract value of Rs. 2,46,22,679. The bid opening date for this tender is 02-01-2020 and the last date for bid submission is 25-01-2020. Interested bidders for Public Works Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Public Works Department - PWD Tender
Opening Date2 Jan 2020
Closing Date25 Jan 2020
Tender Amount₹ 2,46,22,679
Costs
EMD
₹ 5,83,338Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Miapur Rob Via Deulti Kanpur To Ajagarpara More On Nh-34 Road From Chainage 0.00 Kmp To 7.10 Km - Improvement Of Riding Quality Work.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2020_PWD_263429_1Bid Award Id
ViewTender No
WBPWD/SE/CC/e_NIT_22 of 2019_2020Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://wbpwd.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
RCC Grade M25
Using concrete mixer
55.72
-
5541.81
... More
Providing and laying of boulder apron laid in wire crates made with 4mm dia GI wire conforming to IS: 280 & IS:4826 in 100mm x 100mm mesh (weaved diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 40 kg each.
43.2
-
2369
... More
Plain / Reinforced Cement Concrete in Open
foundation with or without reinforcements, in any part of foundation of bridges / culverts with graded stone chips of appropriate nominal sizes, including screening and cleaning of coarse aggregates, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, cost of curing with water, including cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge, cost for quality control, sampling, testing etc. including cost of formwork but excluding reinforcement complete as per drawing and technical specifications.
PCC Grade M20
Using concrete mixer
17.63
-
5330.47
... More
Replacement of Expansion Joints complete as per drawings
48.6
-
2442
... More
Road Furnitures :-
-
-
-
... More
Providing weep holes in Brick masonry / Plain /
Reinforced concrete abutment, wing wall / return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V:20H towards drawing face. Complete as per drawing and Technical specifications.
24
-
115
... More
Providing and laying of Filter media with granular materials/stone crushed aggregates/brick aggregates /river bed materials satisfying the requirements laid down in clause 2504.2.2 of MoRT&H Specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification.
120
-
1848.37
... More
Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specifications Clause 201 for Rural Roads of MORD.
By Mechanical Means
In area of non-thorny jung
1.42
-
23363
... More
Supplying, fitting and fixing in position true to line and level Elastomeric bearing conforming to IRC: 83 (Part-II) Section IX and Clause 2005 of MoRT&H specifications complete including all accessories as per drawing and Technical Specifications.
43800
-
1
... More
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
280
-
24
... More
Sand filling in foundation trenches and at the back of abutments, wing-walls etc. with good local sand free from earth in layers not exceeding 15 cm. including inundating each layer by profuse water and poking and ramming layer by layer complete including supply of sand. Quality of sand is to be approved by the Engineer-in-charge.
18.35
-
1121.8
... More
Water Bound Macadam Sub Base by consolidating Jhama metal / Laterite chelly or stone metal /shingles of specific size in hard crust to requisite thickness (measured after compaction) in layers including screening of metals etc. as necessary, hand packing, sweeping, watering and rolling in stages with power roller to proper line, grade and camber, lighting, guarding & barricading and making necessary earthen bundh of one metre width on each side where necessary to protect edges and preparing the bed by necessary cutting or filling and rolling all complete including the cost of all materials and hire and labour charges of all men and machineries and compacting to the required density, as per Clause 404 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).
For Construction of Sub Base by consolidating
Jhama metal (63 mm to 45 mm) with moorum
screening :
1612.65
-
1890.07
... More
Providing and laying bituminous macadam with Hot Mix Plant using approved crushed aggregates of specified grading as per Table 500.7 premixed with bituminous binder, transported to site laid over a previously prepared surface at specified laying temperature with paver finisher to the required
grade, level and alignment and rolled with suitable power roller for break down, inter-mediate and finished rolling as per specification to achieve the desired -compaction including cost and carriage of stone materials and bitumen, hire charges of machinery and equipment, cost of fuel and lubricants and wages of operational staff, quality control complete as per Clause 504 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).
For Grading 2
(19 mm nominal size, 50-75 mm thick.)
Using Drum mix Type HMP of minimum capacity 60-90 TPH.
343.13
-
5850.98
... More
Box Culvert (Existing 13 Nos.)
-
-
-
... More
Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of brick masonry, including disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 m as per Technical Specifications Clause 202 for Rural Roads of MORD.
Cement mortar
33.6
-
280
... More
Guniting concrete surface with cement mortar (25 mm nominal thick) applied with compressor after cleaning surface and spraying with epoxy complete as per Technical specification.
70.95
-
912
... More
Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material comple+B40 te as per direction of the Engineer-in-Charge .
I. In all sorts of soil excluding marshy soil & rocks (soft or hard) by manual means.
upto 3 m depth
With pumping out water including shoring
as required.
206.41
-
124
... More
Providing and applying primer coat with Cationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 and requisite quantity on prepared surface of granular base including cleaning of road surface and spraying primer using Mechanical means including cost and carriage of bitumen emulsion and all other incidental costs of work complete as per Clause 502 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).
For WBM / WMM Surface: (Using Bitumen Emulsion @0.85 kg per Sqm)
3375
-
36.86
... More
Drainage Spouts in Superstructure including
providing drip mouldings and also including
supplying, fitting and fixing approved type of
materials complete as per drawing and Technical specification vide clause no. 2705 of MoRT&H’s Specification for Road & Bridge Works.
28
-
783
... More
Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge .
I. In all sorts of soil excluding marshy soil & rocks
(soft or hard) by manual means.
upto 3 m depth
With pumping out water including shoring as required.
420
-
155
... More
Plain / Reinforced Cement Concrete in Open
foundation with or without reinforcements, in any part of foundation of bridges / culverts with graded stone chips of appropriate nominal sizes, including screening and cleaning of coarse aggregates, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, cost of curing with water, including cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge, cost for quality control, sampling, testing etc. including cost of formwork but excluding reinforcement complete as per drawing and technical specifications.
PCC Grade M20
Using concrete mixer
315.16
-
5330.47
... More
Providing Close Eucalyptus ballah piling consisting of 150 mm dia (50%) & 100 mm dia (50%) ballah of length 2.40 mtr (1.5 mtr. Driven & 0.900 mtr. Exposed) at 650 mm c/c and provided with two horizontal half splice 100 mm dia ballah runner fixed with nail & bolts etc. and providing 2.5 mtr long Eucalyptus ties of 2.00 mtr centre to centre fixed with tie post driven 1.50 mtr below G.L. including cost of all materials and two coats of coal taring of all ballah etc. complete as per dirction (including cost of providing filling and proper laying the cement bags average 0.75 m weidth) Driving atleat 2.65 M (for 150 mm dia) below ground and both are 1.35 M above ground Level.
180
-
3821.88
... More
GST
12
-
25784016.12
... More
Ordinary kilometer stone (precast)
5
-
1577
... More
Drainage Spouts in Superstructure including
providing drip mouldings and also including
supplying, fitting and fixing approved type of
materials complete as per drawing and Technical specification vide clause no. 2705 of MoRT&H’s Specification for Road & Bridge Works.
28
-
783
... More
Painting the vertical end faces of posts, wheel guards or railing or parapet with alternate bands of different colours as directed by the Engineer-in-charge with approved synthetic enamel paint.
Two Coats
7.95
-
99
... More
Supplying Eucalyptus-bullah piles at work site,
including dressing and making one end pointed.
150mm diameter
600
-
217
... More
Cleaning the concrete surface by removing dirt and debris, marking defective locations and removing loose concrete by careful stripping untill hard surface is exposed, cutting the concrete to regular shape, wire brushing the exposed surface and removing debris from site complete as per direction of the Engineer - in - Charge.
212.76
-
90
... More
Supplying, fitting and placing HYSD bar
reinforcement in Bridge Super-structure including initial straightening, straightening of coils bars, removal of loose rust (if any), cutting to requisite length bending, binding with annealed wire not less than 1 mm in size and conforming to IS 280 at every intersection hooked and bent to correct shape and placed on forms etc. including cost of black annealed wire and cost of loading, unloading,carriage of all steel materials complete as per drawing and technical specifications.
5.99
-
59414.55
... More
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specifications Clause 202 for Rural Roads of MORD.
By Manual Means
Reinforced Cement Concrete
41.61
-
1011
... More
Supplying, fitting and placing HYSD bar reinforcement in Sub-structure including initial
straightening, straightening of coils bars, removal of loose rust (if any), cutting to requisite length bending, binding with annealed wire not less than 1 mm in size and conforming to IS 280 at every intersection hooked and bent to correct shape and placed on forms etc. including cost of black annealed wire and cost of loading, unloading, carriage of all steel materials complete as per drawing and technical specifications and direction of Engineer-in-charge.
11.02
-
59414.56
... More
Plain / Reinforced Cement Concrete in Open
foundation with or without reinforcements, in any part of foundation of bridges / culverts with graded stone chips of appropriate nominal sizes, including screening and cleaning of coarse aggregates, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, cost of curing with water, including cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge, cost for quality control, sampling, testing etc. including cost of formwork but excluding reinforcement complete as per drawing and technical specifications.
PCC Grade M20
Using concrete mixer
14.58
-
5330.47
... More
Back filling behind abutment, wing wall and return wall complete as per drawing and Technical specification.
Granular material
By fine sand
109.32
-
1388.36
... More
Direction and Place Identification Signs with sizemore than 0.9 sqm size Board. Providing and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).
6
-
9568
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course,scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]
With 1:4 cement mortar
15 mm thick plaster
98.28
-
158
... More
Sand filling in foundation trenches and at the back of abutments, wing-walls etc. with good local sand free from earth in layers not exceeding 15 cm. including inundating each layer by profuse water and poking and ramming layer by layer complete including supply of sand. Quality of sand is to be approved by the Engineer-in-charge.
18.35
-
1121.8
... More
Patching of damaged concrete surface with
polymer concrete (25 mm nominal thick) and
curing compounds, initiator and promoter,
available in present formulations, to be applied as per instructions of manufacturer and as approved by the Engineer.
135
-
1391
... More
Labour for driving Sal-bullah / Eucalyptus bullah piles by monkey in sorts of soil including hoisting and placing piles in position, protecting the pile head with iron ring and cutting and shaping heads before and after driving and including hire and labour for necessary driving appliances and all tackles.
150mm diameter
600
-
105
... More
Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 for Rural Roads of
MORD. (Mode of measurement: pre works and post works) Carriage upto 5 km
9619.5
-
310.95
... More
Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge .
In all sorts of soil excluding marshy soil & rocks (soft or hard) by manual means.
upto 3 m depth
With pumping out water including shoring
as required.
576
-
124
... More
Drainage Spouts in Superstructure including
providing drip mouldings and also including
supplying, fitting and fixing approved type of
materials complete as per drawing and Technical specification vide clause no. 2705 of MoRT&H’s Specification for Road & Bridge Works.
80
-
783
... More
Box cutting or filling in Road embankment in all sorts of soil including spreading the spoils properly over the flank as necessary or on berm to approximate grade & camber and rolling the sub-grade with power roller to proper camber and grade as per direction and satisfaction of Engineer-in-charge including uprooting and removing plants and jungles when and where
necessary.
Depth up to 150 mm.
10428
-
14.4
... More
Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 80 mm, complete as per approved drawings and standard specifications to be installed by the manufacturer / supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation.
48.6
-
10000
... More
Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.
NOTE:Cement 0.152 cu.m per100 sq.m.
1040
-
34
... More
Providing and inserting nipples with approved fixing compound after drilling holes for grouting as per Technical specifications including subsequent cutting/removal and sealing of the hole as necessary of nipples after completion of grouting with Cement/Epoxy.
116
-
102
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course,scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]
With 1:4 cement mortar
15 mm thick plaster
7.95
-
158
... More
80 mm x 60 mm rectangular
12
-
5208
... More
Providing and laying of Filter media with granular materials/stone crushed aggregates/brick aggregates /river bed materials satisfying the requirements laid down in clause 2504.2.2 of MoRT&H Specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification.
43.73
-
1848.37
... More
Protective Work :-
-
-
-
... More
Sealing of crack / porous concrete with Epoxy
Grout by injection through nipples complete as per clause 2803.1.
58
-
882
... More
Supplying, fitting and placing HYSD bar
reinforcement in Sub-structure including initial
straightening, straightening of coils bars, removal of loose rust (if any), cutting to requisite length bending, binding with annealed wire not less than 1 mm in size and conforming to IS 280 at every intersection hooked and bent to correct shape and placed on forms etc. including cost of black annealed wire and cost of loading, unloading, carriage of all steel materials complete as per drawing and technical specifications and direction of Engineer-in-charge.
8.75
-
59414.55
... More
Concrete Surface Drain :-
-
-
-
... More
Cess
1
-
28878098.05
... More
Retro-Reflectorised Traffic Signs
Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75
mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).
60 cm equilateral triangle
14
-
2811
... More
Back filling behind abutment, wing wall and return wall complete as per drawing and Technical specification.
Granular material
By fine sand
109.32
-
1388.36
... More
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specifications Clause 202 for Rural Roads of MORD.
By Mechanical Means
Reinforced Cement Concrete
16.96
-
773
... More
Plain / Reinforced Cement Concrete in Open foundation with or without reinforcements, in any part of foundation of bridges / culverts with graded+B58 stone chips of appropriate nominal sizes, including screening and cleaning of coarse aggregates, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, cost of curing with water, including cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge, cost for quality control, sampling, testing etc. including cost of formwork but excluding reinforcement complete as per drawing and technical specifications.
PCC Grade M20 Using concrete mixer
11.24
-
5330.47
... More
Sand filling in foundation trenches and at the back of abutments, wing-walls etc. with good local sand free from earth in layers not exceeding 15 cm. including inundating each layer by profuse water and poking and ramming layer by layer complete including supply of sand. Quality of sand is to be approved by the Engineer-in-charge.
288
-
1121.8
... More
Cement concrete with graded stone ballast (40 mm size excluding shuttering)
In ground floor
[Pakur Variety]
1:3:6 proportion
26
-
5188.93
... More
Hire and labour charges for 100 mm dia bamboo railing on 150 mm dia Jhau/ Eucalyptus or other approved timber osts each 2.0 m in length, tied 2 number post strongly with coir ropes in the fashion of a scissor with a spacing of 1.8 m over pacca road without damaging the surface and tying strongly 3 (three) rows of bamboo railing on each leg and 1 (one) railing connecting all the top junctions including cost of loading unloading, stacking & carriage of all materials and labour complete, clearing the site as per direction of Engineer in charge after removing the barricade. 100mm. dia bamboo railing & 150mm.dia Jhau/Eucalyptus/ other approved timber posts+B86 with 1.8 m spacing.
Railing 4 row on each leg and 1 at pivot point
286
-
181
... More
Providing weep holes in Brick masonry / Plain /
Reinforced concrete abutment, wing wall / return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V:20H towards drawing face. Complete as per drawing and Technical specifications.
32
-
115
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course,scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]
With 1:4 cement mortar
15 mm thick plaster
1040
-
158
... More
Providing & Laying 20 mm thick Mix Seal Surfacing (MSS) Providing, laying and rolling of close graded premix surfacing using materials of 20 mm thickness composed of 11.2mm to 0.09mm (For Type – A) or 13.2mm to 0.09mm ( For Type – B) aggregates using penetration grade bitumen to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a
suitable plant, laying and rolling with a smooth
wheeled roller 8 – 10 tonne capacity and inishing to required level and grade etc. including all other incidental charges, quality control as per clause 508 of specifications for Road & Bridge Works of MoRT&H (5th Revision) complete.
Type – B : Using 1.9 kg bitumen per square meter surface area :
Using Hot Mix Plant not less than 75 T / Hr.
25740
-
131.32
... More
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
480
-
24
... More
Furnishing and Placing Reinforced / Pre-stressed Cement concrete in Super-structure with coarse aggregates of appropriate nominal size and grading, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement and admixtures, as necessary, including labour, cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge and cost for
quality control, sampling, testing etc. all omplete as per drawing and technical specification including the cost of necessary form work and staging complete. as per drawing and technical specifications.
RCC Grade M 30
Using Concrete Mixer
For solid slab super-structure,
Height upto 5m
33.9
-
6440.98
... More
Sand filling in foundation trenches and at the back of abutments, wing-walls etc. with good local sand free from earth in layers not exceeding 15 cm. including inundating each layer by profuse water and poking and ramming layer by layer complete including supply of sand. Quality of sand is to be approved by the Engineer-in-charge.
96
-
1121.8
... More
Box Culvert (Existing 1 No.)
-
-
-
... More
Epoxy bonding of new concrete to old concrete
212.76
-
517
... More
60 cm circular
10
-
3750
... More
Plain / Reinforced Cement Concrete in Open
foundation with or without reinforcements, in any part of foundation of bridges / culverts with graded stone chips of appropriate nominal sizes, including screening and cleaning of coarse aggregates, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, cost of curing with water, including cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge, cost for quality control, sampling, testing etc. including cost of formwork but excluding reinforcement complete as per drawing and technical specifications.
PCC Grade M20
Using concrete mixer
270
-
5330.47
... More
Expansion Joint
-
-
-
... More
Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc.
5 th kilometre stone (precast)
3
-
2687
... More
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening / binding materials to fill up the interstices of coarse aggregate, watering including lighting, guarding, barricading and making necessary earthen bundh of one metre width on each side and preparing the bed by necessary cutting or filling, including cost of all materials and hire and labour charges of all men and machinery and compacting to the required density, as per Clause 404 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).
Grading-II Aggregate (53 mm to 22.4 mm) Using
Stone Screening Type B (11.2 mm)
Manual Means
759.38
-
1955.39
... More
Supplying fitting and fixing R.C. guard post 1.37m long with C.C. 1:2:4 with graded stone chips of 13.2mm down casting , curing complete including cost of providing 4nos.of 12mm dia. rod of length 1.54m as main reinforcement and 6 nos. of round shaped 8mm dia rods used as binders; the placing of the first binder should be at 75mm below the top finished surface and the other 5 nos of binders should be placed at 245mm c/c ; the guard post is of octagonal section with inscribed circle of dia 24cm at the base tapering to corresponding dimensions of 16cm at the top including two coats of painting with
best quality synthetic enamel paint of approved
make and grade to form 6 nos. horizontal lternate bands in white/tannery yellow and black to 90 cm length standing up above ground after mending good damages if any during striking off shuttering, making hole in ground of 47cm depth and 30cm. minimum dia, fixing the guard posts in the same holes and repacking the earth properly so as to keep
the guard posts standing properly erect in correct position true to line and length including carriage of R. C. Guard Post with due care to the site including loading into the truck and unloading at site complete in all respect.
With Pakur variety stone chips
240
-
773
... More
Mixing Superplastisizer in concrete as per
manufacturer's specification and direction of
Engineer-in-Charge. The rate is inclusive of cost of superplastisizer.
Naptha based
84.75
-
73.1
... More
Painting the vertical end faces of posts, wheel guards or railing or parapet with alternate bands of different colours as directed by the Engineer-in-charge with approved synthetic enamel paint.
Two Coats
244.8
-
99
... More
Sealing the holes by rapid strengthening Compound Sikarep micro Crete type IV by mechanical mixing and maintaining the proper profile alignment of the carriage way prior cleaning the surface complete including the cost of all materials, labour, tools & tackles etc. as per direction of the Engineer in Charge.
17.01
-
27170
... More
Providing weep holes in Brick masonry / Plain /
Reinforced concrete abutment, wing wall / return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V:20H towards drawing face. Complete as per drawing and Technical specifications.
200
-
115
... More
Providing and laying of Filter media with granular materials/stone crushed aggregates/brick aggregates /river bed materials satisfying the requirements laid down in clause 2504.2.2 of MoRT&H Specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification.
43.73
-
1848.37
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)
25 mm to 30 mm shuttering without staging in foundation
40.26
-
205
... More
Providing and laying of boulder apron laid in wire crates made with 4mm dia GI wire conforming to IS: 280 & IS:4826 in 100mm x 100mm mesh (weaved diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than40 kg each.
43.2
-
2369
... More
Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge .
In all sorts of soil excluding marshy soil & rocks
(soft or hard) by manual means.
upto 3 m depth
With pumping out water including shoring
as required.
166.22
-
124
... More
Providing and applying tack coat with Cationic
Bitumen Emulsion of approved grade conforming to IS: 8887-1978 on the prepared surface cleaned with Hydraulic broom, moistening the surface including cost and carriage of emulsion, hire charges of machinery and labour, cost of fuel and ubricants all complete as per Clause 503 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).
On Bituminous Surface
(Using Bitumen Emulsion @0.275 kg per sqm.)
33108.75
-
12.74
... More
Providing weep holes in Brick masonry / Plain /
Reinforced concrete abutment, wing wall / return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V:20H towards drawing face. Complete as per drawing and Technical specifications.
24
-
115
... More
Providing and laying Mastic asphalt wearing course with paving grade bitumen meeting the
requirements given in table 500-29 using approved coarse aggregate, fine aggregate, filler material and bitumen, prepared by using Mastic cooker including cost and carriage of all ingredients, cost of heating aggregates and binder, mixing in specified proportions conforming to approved Job Mix Formula and laid to required level and slope after cleaning the surface, compacting, sealing the construction joints and surface finishing conforming to specifications including providing antiskid surface with bitumen pre-coated fine-grained hard stone chipping of 13.2 mm nominal size at the rate of 0.005 cum per 10 sqm and at an approximate spacing of 10 cm center to center in both directions, pressed into surface when the temperature of surfaces not less than 100°C, protruding 1 mm to 4 mm over mastic surface, including the hire charges of all tools and plants and machinery, pay of operators, cost of fuel and lubricants and all other incidental charges and quality control all complete as per Clause 516 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).
25 mm thickness
2079
-
515.39
... More
Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge .
In all sorts of soil excluding marshy soil & rocks
(soft or hard) by manual means.
upto 3 m depth
With pumping out water including shoring
as required.
28.16
-
124
... More
Painting the vertical end faces of posts, wheel guards or railing or parapet with alternate bands of different colours as directed by the Engineer-in-charge with approved synthetic enamel paint.
Two Coats
108.94
-
99
... More
Welding in M.S. structural work with gas or electric:
Continuous weld.
20750
-
9
... More
Picking up and removing old bituminous layer or sand sealing coat from old black topped surface and cleaning the exposed surface by scraping and stacking the material as directed.
By mechanical means (without milling machine) :
From 25 mm to 50 mm thick.
3375
-
3.8
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
North Dinajpur, West Bengal