Public Works Department Tender

French polishing to wood work including preparing surface (ordinary gloss) (a) On new wood work

In 2nd Floor

Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. vii) 8mm thick clear glass.

1st Floor

SUPPLYING FITTINGS FIXING TEXTILE FEBRIC WINDOW COVERING AS APPROVED FIXED IN 40MM DIA POWDER COATED COLOR ALUMINIUM ROLLER BAR SUPPORTED IN 50MM DIA PVC PULLY ALONG WITH PULLING ARRANGEMENT BY NYLONG STRING COVERED WITH FOR 4MM PVC DIA GRIP BALL. BUTTOMSIDE COVERING IS ATTACHED WITH 12MM DIA POWDER COATED COLORED ALUMINIUM ROUND BAR AS COUNTED WEIGHT . THE TOTAL ASSEMBLY IS FIXED WITH TWO NUMBER POWDER COATED COLORED ALUMININ CLAMP IN WALL/ CEILING . THE RATE IS INCLUDED OF ALL LABOUR MATERIALS TAXES, CARRAGE AND ALL OTHER CHARGES ALL COMPLETE AS PER E.I.C.

Filling the gap in between aluminium frame & adjacent RCC / Brick/ Stone work by providing weather silicon sealant over 6mm dia backer rod of approved quality as per architectural drawings and direction of Engineer-in-Charge complete. Upto 5 mm depth and 5 mm width

Dressed wood work in post , plate , battens . etc. fitted & fixed complete (excluding the cost of bolts only, but including the cost of nails, screws etc.) (The quantum should be corrected upto three decimals) Sal : Local Ground Floor

6 mm thick Multipurpose Cement board - Type-B (High Pressure steam cured,tested as per AS-1530 part 3 & BS-476 Part 4,5,6,7 & 8, density 1450kg/m3, Bond strength 15 N/sqmm fire resistant, termite proof, moisture resistant) reinforced with cellulose fibre manufactured through autoclaving process as per IS : 14862 & ISO 8336, with fibre cement screws in partition as per drawings and direction of Engineer-in-Charge complete. (The above stated item can be used successfully to cover up efflorescence & damp affected walls to improve the aesthetic view).

SUPPLYING FITTINGS AND FIXING HIGH DENCITY LASER CUTTING CURBON FIBER BAORD (CHARCOLE BOARD) 8MM THICK OF APPROV DESIGNE FINISH WITH APPROV 2 COATS OF DUCO PAINTS AFTER PRPAIRING THE SURFACE WITH 400 AND 1200 NO. MRE PAPER AND 2 COATS OF DUCO PRIMER, FIXING WITH STEEL SCREW AND SHADESIVE OVER SOLID SURFACE AS PER DIRECTIONOF E.I.C.

Supplying 25mm thick Resin Bonded Glass Fibre Wool (weighing 48kg/m3) conforming to HSN code 7019 and fitted & fixed in position using suitable clip. G. I. wire, pins etc. In blanket form of size of 0.60m x 0.60m. Convered with approved quality cotton cloth treated with Naptha Chmical complete as per direction of the E-I-C.

2nd Floor

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) Luxury Quality

M.F. suspended ceiling made with 12.5 mm thick Gypsum plaster board including G.I. perimeter channel of 0.55 mm flush (having two flanges 20 mm and 30 mm respectively and web 27 mm ) along with perimeter of ceiling with G.I. intermediate channel of 0.9 mm thick size 45 mmx15mm placed at 750 mm c/c with G.I. ceiling angle of size 25 mmx10mmx0.55 mm thick fixed to the ceiling with G.I. Cleat and steel expansion fastener ceiling section 0.55 mm thick of size 51.50 mmx26mm fixed to the intermediate channels with the help of connecting clip and in the direction of perpendicular to the intermediate channel of 300 mm c/c 12.5 mm thick Gypsum plastered board are to be fixed under ceiling section as above by machine screws. The boards are to be joined and finished with jointing compound, paper tape and application of top coat etc. as per the direction of Engineer-in-charge. (The rate includes of cost of all materials including taxes, cost of accessories, fittings and fixtures, scaffolding and labour charges etc. complete) In ground floor

Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping] 9mm In Ground Floor & Ist floor

Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: 300mm long x 10mm dia. bolt.

2nd Floor

In 2nd Floor

FURNITURE ITEMS. SUPPLYING SOLID WOODEN DESIGNER CONTRE TABLE 36'' X 36'' WITH GLASS TOP AS PER DIRECTION OF E.I.C

Supplying, fitting and fixing Godrej Multi Lock or equivallent .

Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: (a) With continuous plate base (Hexagonal/ Round rod) 150 mm grip x 12 mm dia rod.

In 2nd Floor

Add @ 12 % GST

QUALITY TEXTURED INTERIOR HIGH MATT FINISH PAINT OF APPROVED QUALITY ,COMPOSED OF SPECIAL THARMOPLASTIC RESIN CONTAINING FINE CRYSTALLINE ADDITIVES DERIVE FROM GRANITE AS PER MANUFACTURER'S SPECIFICATION AND AS PER DIRECTION OF EIC TO BE APPLIED OVER ACRYLIC PRIMER AS REQUIRED 2 COATS.

SUPPLYING, FITTING AND FIXING LASER CUTTING HIGH DENCITY FIBER BAORD ( 10MM THICK) OF APPROVED DESIGNER FINISH WITH APPROVED 2 COATS OF DUCO PAINTS AFTER PREPAIRING THE SURFACE WITH 400 AND 1200 NO. MRE PAPER AND 2 COATS OF DUCO PRIMER, FIXING WITH STEEL SCREW AND SH ADHESIVE OVER SOLID SURFACE AS PER DIRECTION OF E.I.C.

Supplying wooden moulding slanting beat of size 37mm X 18mm (finished) of approved design to finish the joint between wooden frame of door/window with masonary in true line and level fitted & fixed with adhesive and head less pins complete as per direction of Engineer -in-charge. a) Teak wood beat

Polyurethane Polishing to woodwork with required colour as approved by Engineer-in-Charge with preparing surface including scaffolding and hire charges of compressor machine including cost of filler and hardener material such as P. U. Sealing, P. U. Top coat (Matt/Glossy), Thinner, Spirit etc. and inclusive of all operation, material and labour complete as per direction of Engineer-in- Charge.

1st Floor

Add @ 1% Labour Cess

Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws: 125 x 75 x 4.0mm.

xi) 12mm thick clear glass.

Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick)

19mm In Ground Floor & Ist floor

SUPPLYING FITTING AND FIXING CURTAIN MADE WITH SUPERIOR QUALITY APPROVE MAKE SUPERIOR QUALITY APPROVED MAKE COTTON CLOTH OF APPROVED DESIGN INCLUDING MACHINE STITCHING WITH PLITS, BEST QUALITY WHITE SYNTHETIC LINING AT BACK SIDE, HANGING FRTOM TEAK WOOD, P.U. POLISH DECORATIVE DRAPRY FITTING WOODEN SOCKETS ,SS 25MM DIA PIPE FITTED AND FIXED WITH SS IS MARK SCREWS ALL COMPLETE AS PER DIRECTION OF E.I.C I) WINDOW.

SUPPLYING SOLID WOODEN DESIGNER SIDE TABLE "C"- SHAP WITH GLASS TOP 15''X33'' AS PER DIRECTION OF E.I.C

UPPLYING, FITTING & FIXING DECORATIVE IMPORTAVE DESIGNER WALL PAPER ON EXSISTING PLY BOARD WALL AFTER PREPEARING THE SURFACE TO RECEIVED THE WALL PAPER I.E SMOOTHENING THE SURFACE OF PLY WALL, FILLING THE JOINT WITH PUTTY 2 COATS SOLVENT BASED PRIMER ON IT. WALL PAPER WILL BE FIXED IN GOOD QUALITY APPROV MAKE ARELDITE/ADHESIVE THE WORK SHOULD BE DONE BY THE SKILLED LABOUR/ APPLICANTS.