Public Works Department Tender

... More
The PWD has issued a formal invitation for competitive bids for the Public Works Department project, for Wbpwd/pw(r)/sepd/piu-i/nit-52 Of 2026-2027 Sl_1 in Kalimpong, West Bengal, with an estimated contract value of Rs. 43,08,76,239. The bid opening date for this tender is 04-11-2026 and the last date for bid submission is 30-11-2026. Interested bidders for Public Works Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Public Works Department - PWD Tender - WB Tender

Opening Date4 Nov 2026
Closing Date30 Nov 2026
Tender Amount₹ 43,08,76,239 
Notes
Download

Costs

Summary

Wbpwd/pw(r)/sepd/piu-i/nit-52 Of 2026-2027 Sl_1

Description

pedong to rangpo via kashyong raniban (upto bhalu marg) road (from 0.000 km to 15.70 km), from 0.00 km to 8.950 km – widening & strengthening works and from 8.950 km to 15.70 km – strengthening works including construction of 23 nos. c.d structure, 4500 m protective work, 8050 nos parapet wall & 15700 m drainage work under kalimpong division, pwd in the district of kalimpong.

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
Granular Sub-Base with Graded Material Plant Mix Method Construction of granular sub-base by providing graded material such as natural sand/crushed gravel/crushed stone/combination depending upon the required grading spreading in uniform layers with motor grader on prepared surface, mixing by appropriate mechanical mixture (with controlled addition of water), and compacting with vibratory roller to achieve at least 98% of the maximum dry density for the material determined as per IS:2720 (Part 8),complete as per clause 401 Rate per cum for grading-V Material With NB Variety stone matal/chips. (Payment will be made on the basis of finished compacted volume)

541.83

3672

1989979

... More
Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate conforming to the grading of table 400- 13 revised vide table 2 of IRC : 109 (2015) to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density .The thickness of a single compacted layer shall not be less than 75 mm.(Reference to MoRT&H's specification 406. With NB Variety stone matal/chips. (Payment will be made on the basis of finished compacted volume)

8644.76

3710

32079062

... More
Prime Coat Providing and applying primer coat with cationic bitumen emulsion SS1 grade conforming to IS:8887 on prepared porous granular surface including clearing of road surface and spraying primer using mechanical means (Reference to MORT&H's specification clause 502). For WBM / WMM Surface: [with Cationic Bitumen Emulsion (Bulk) CSS-1 Type @ 0.85 kg/ sqm] (Payment will be made on the basis of finished surface area)

70094.08

84

5908230

... More
Tack Coat Providing and applying tack coat with Cationic bitumen emulsion (RS1) complying with IS:8887 using emulsion pressure distributor on the prepared bituminous/granular /cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503). On Granular surface treated with primer: [By using Cationic Bitumen Emulsion RS-1 Type (Bulk) @ 0.275 kg/m2] (Payment will be made on the basis of finished surface area)

70094.08

27

1927587

... More
Bituminous Macadam Providing and laying bituminous macadam with 100-120 TPH hot mix plant using crushed aggregates of specified grading premixed with approved bituminous binder@3.3% (min) for Grading-1and3.4%(min) for Grading-2 by weight of total mix, transported to site, laid over a previously prepared base with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction (Reference to MORT&H's specification clause 504). For Grading II (19mmnominal maximum aggregate size) Layer compacted Thickness 50-75mm Using Pakur variety stone material,and bituminous binder (VG-30 bulk @ 75.00kg./ m3) (Payment will be made on the basis of finished compacted volume)

3504.71

14184

49714136

... More
Mastic Asphalt Providing and laying 25 mm thick mastic asphalt wearing course with approved grade bitumen meeting the requirements given in table 500- 39, prepared by using mastic cooker and laid to required level and slope after cleaning the surface, including providing antiskid surface with bitumen precoated fine-grained hard stone chipping of 13.2 mm nominal size at the rate of 0.005cum per 10 sqm and at an approximate spacing of 10 cm center to center in both directions, pressed into surface when the temperature of surfaces is not less than 100°C, protruding 1 mm to 4 mm over mastic surface, all complete as per clause 516 (Reference to MORT&H's specification clause 516 along with IRC:107). Using Pakur variety stone material, and Industrial Grade Bitumen 85/25 (Packed) @ 5.714 Kg./m2 & Bitumen for coating of chips VG-30(Bulk) @ 0.0143kg./ m2. (Payment will be made on the basis of finished surface area)

70094.08

990

69408560

... More
Part-B : Road Furniture & Traffic Safety Measure

-

-

-

... More
Road Distance Indicator Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc (Reference to MORT&H's specification 805). Ordinary kilometer stone (precast) With NB Variety stone chips.

11

2516

27685

... More
Road Distance Indicator Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc (Reference to MORT&H's specification 805). 5th Kilometre stone (precast) With NB Variety stone chips.

4

4131

16525

... More
Retro-Reflectorised Traffic Signs: Providing and fixing of retroreflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick,when signs with maximum side dimensions do not exceed 600mm, or with aluminium sheeting 2.0mm thick when signs with maximum side dimensions exceeds 600mm, supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing (Reference to MORT&H's specification 801). 60 cm circular With NB Variety stone chips.

120

4916

589980

... More
Retro-Reflectorised Traffic Signs: Providing and fixing of retroreflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick,when signs with maximum side dimensions do not exceed 600mm, or with aluminium sheeting 2.0mm thick when signs with maximum side dimensions exceeds 600mm, supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing (Reference to MORT&H's specification 801). 80 cm x 60 cm rectangular With NB Variety stone chips.

44

6832

300625

... More
Retro-Reflectorised Traffic Signs: Providing and fixing of retroreflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick,when signs with maximum side dimensions do not exceed 600mm, or with aluminium sheeting 2.0mm thick when signs with maximum side dimensions exceeds 600mm, supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing (Reference to MORT&H's specification 801). 60 cm equilateral triangle With NB Variety stone chips.

104

3681

382857

... More
Supplying & fixing of Hazard Markers of size : 30cm X 90 cm as per IRC :79-1981 ( The above is inclusive of vertical post)

184

4399

809519

... More
Direction and Place Identification Signs with size more than 0.9 sqm size Board. Providing and erecting direction and place identification retroreflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing (Reference to MORT&H's specification 801). With NB Variety stone chips.

25.92

20340

527238

... More
Direction and Place Identification Signs upto 0.9 sqm Size Board: Providing and erecting direction and place identification retroreflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing (Reference to MORT&H's specification 801). With Pakur Variety stone chips.

23.4

12042

281790

... More
Metal Beam Crash Barrier Reference to MORT&H's specification 811). Type - A, "W" : Metal Beam Crash Barrier Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m center to center, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanized by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 811

10750

3092

33247278

... More
Supplying & fixing of Raised Pavement Markers/Road Studs/Cats Eye made of polycarbonate molded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face which shall support a load of 13635 kg tested in accordance to ASTM D 4280 Type H and compiling to Specifications of Category A of MoR&TH Circular No. RW/NH/33023/10-97 - DO III Dt. 11.06.1997 & MoRT&H's specification for Road &Bridge Works (Fifth Rev.). Marker height shall not be less than 10 mm and shall not exceed 20 mm, width shall not exceed 130mm and with minimum reflective area of 13 sqm on each side and slope to the base shall be 35 ± 5 degree. Fixing will be without nails but by using epoxy resin-based adhesive as per manufacturer's recommendation including site clearance etc. and complete as directed by the Engineer in Charge. The contractor will have to provide a test certificate from a reputable national/international laboratory conforming the above specifications.

3507

219

771470

... More
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes (Reference to MORT&H's specification 803).

3156.3

622

1965712

... More
Road Delineators :- Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80- 100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia. circular reflectorized panels at the top, buried or pressed into the ground and conforming to IRC-79 and the drawings (Reference to MORT&H's specification 806).

5000

877

4387350

... More
Part-C : Protective Works

-

-

-

... More
PLUM CONCRETE (1:3:6) Plain cement concrete of nominal mix (1:3:6) with coarse aggregate of which stone boulder of size 225 mm to 150mm of 60% of total dry volume to be placed in position as directed by Eng-in charge ,67% - 40 mm down single &33% - 20 mm down bazri , Coarse Sand ,Cement ( 53 grade ) mechanically mixed in 1:3:6 of rest volume and placed in position and compacted by any means as directed including cost of shuttering . Using N.B. variety Boulder 225 mm to 150 mm & Stone chips.

13554

4026

54576265

... More
Excavation for Structures Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material (Reference to MORT&H's specification 304). Ordinary soil, Manual Means Depth upto 3 m

8340

151

1264844

... More
Plain/Reinforced cement concrete in open foundation complete all including formwork, vibrating and compacting, finishing, curing, sampling, testing etc. as per drawing and Technical Specifications (Reference to MORT&H's specifications 1500, 1700 & 2200). PCC Grade M15 Using N.B. variety stone chips.

3364.47

6693

22521258

... More
Painting Two Coats on New Concrete Surfaces Painting two coats, after filling the surface & applying a sealing primer, with synthetic enamel paint in all shades on new plastered concrete surfaces as per MORT7H's specification 803.6.2.(Reference to MORT&H's specification 803).

18267.96

71

1303784

... More
Back filling behind abutment, wing wall and return wall complete including sprinkling water and thoroughly compacted with plate compactor/power rammer in layers not exceeding 150mm compacted thickness as per drawing and Technical Specification (710.1.4 of IRC:78 & MoRTH's specification 2200) With River Bed material.

2085

2693

5615468

... More
Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC/PVC/HDPC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications (Reference to MORT&H's specifications 2706 & 2200). Using Cement & Coarse Sand

8340

152

1267930

... More
Part-D : Drain Works

-

-

-

... More
Excavation for Structures Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material (Reference to MORT&H's specification 304). Ordinary soil Manual Means Depth upto 3 m

3310.63

151

502090

... More
Plain/Reinforced cement concrete in open foundation complete all including formwork, vibrating and compacting, finishing, curing, sampling, testing etc. as per drawing and Technical Specifications (Reference to MORT&H's specifications 1500, 1700 & 2200). PCC Grade M15 Using N.B. variety stone chips.

2269.9

6693

15194370

... More
Plain/Reinforced cement concrete in sub-structure complete all including formwork, vibrating and compacting, finishing, curing, sampling, testing etc. by mechanically mixed as per drawing and Technical Specifications (Reference to MORT&H's specifications 1500, 1700 & 2200). RCC Grade M25 Height upto 5m, Using Concrete Mixer Using Pakur variety Stone Chips.

83.16

9388

780757

... More
Supplying, binding, fixing etc. including initial straightening, cutting to requisite length, hooking and bending to correct shape, placing in proper position of uncoated HYSD reinforcement bar in sub-structure complete as per drawing and Technical Specifications (Reference to MORT&H's specifications 1600 & 2200).

9.79

69536

680763

... More
Part-E : CD Works Repairing

-

-

-

... More
Sealing of crack / porous concrete with Epoxy Grout by injection through nipples complete as per clause 2803.1 (Reference to MORT&H's specification 2803).

2405.06

897

2157387

... More
Applying epoxy mortar over leached, honey combed and spalled concrete surface(@ 20-24kg of Epoxy mortar/sqm)and exposed steel reinforcemnt complete as per Technical Secifiction (Refernce to MORTH&H's specification 2804). Thickness of epoxy mortar=10mm.

481.012

576

277462

... More
Guniting concrete surface with cement mortar applied with compressor after cleaning surface and spraying with epoxy complete as per Technical Specification (Reference to MORT&H's specification 2807).

1202.53

942

1133613

... More
Removal of defective concrete, cleaning the surface thoroughly, applying the shotcrete mixture mechanically with compressed air under pressure, comprising of cement, sand, coarse aggregates, water and quick setting compound in the proportion as per clause 2807.1., sand and coarse aggregates conforming to IS: 383 and table 1 of IS: 9012 respectively, water cement ratio ranging from 0.35 to 0.50, density of gunite not less than 2000 kg/cum, strength not less than 25 Mpa and workmanship conforming to clause 2807.6 (Reference to MORT&H's specification 2807). Average thickness of shotcrete mixture 25mm to 40mm

721.518

309

223512

... More
Patching of damaged concrete surface with polymer concrete and curing compounds, initiator and promoter, available in present formulations,to be applied as per instructions of manufacturer and as approved by the Engineer(Reference to Morth&H's specifiction 2807). Average thickness of patching=25mm

481.012

1536

738979

... More
Supplying, binding, fixing etc.including initial straightening, cutting to requisite length, hooking and bending to correct shape, placing in proper postion of uncoated HYSD reinforcement bar in super-structure complete as per drawing and technical specifications (Reference to MORT&H's specification 1600) .

0.74

70901

52467

... More
Epoxy bonding of new concrete to old concrete (crack/spalling shall be sealed with epoxy injection/grouting coating of epoxy resin @ 0.80kg /sqm should be applied )(Reference to MORT&H's specification 2805).

962.024

658

633579

... More
Painting Two Coats on New Concrete Surfaces Painting two coats, after filling the surface & applying a sealing primer, with synthetic enamel paint in all shades on new plastered concrete surfaces as per MORT7H's specification 803.6.2.(Reference to MORT&H's specification 803).

1202.53

71

85825

... More
Construction of precast RCC railing of M30 Grade,aggregate size not exceeding 12mm,true to line and grade,tolerance of vertical RCC post not exceed 1 in 500,centre to centre spacing between vertical post not to exceed 2000mm,leaving adequate space between vertical post for expansion,with a minimum 10 days curing complete as per approved drawings and technical specifications(Reference to MORTH&H's specifications 2703,1500,,1600,&1700) With Pakur Variety Stone Chips & uncoated HYSD reinforcement bar. Including formwork for casting in casting yard and handling & fixing of precast panels in positions.

123

2168

266705

... More
Applying pre-packed cement based polymer of strength 45Mpa at 28 days for replacement of concrete(@21-22 kg polymer mortar/sqm) (Reference to MORTH&H's specification 2800).(ADMIXTURE SHOULD BE ADDED AS PER MANUFACTURER'S SPECIFICATION) Thickness of mortar=10.

481.012

123

59429

... More
Part - F : CD Works

-

-

-

... More
Excavation for Structures Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material (Reference to MORT&H's specification 304). Ordinary soil, Manual Means Depth upto 3 m

5482.9

151

831537

... More
Dismantling of Structures Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres (Reference to MORT&H's specification clause 202) By Manual Means Pretressed/Reinforced cement concrete Grade M-20 & above

958.57

1426

1366988

... More
Back filling behind abutment, wing wall and return wall complete including sprinkling water and thoroughly compacted with plate compactor/power rammer in layers not exceeding 150mm compacted thickness as per drawing and Technical Specification (710.1.4 of IRC:78 & MoRTH's specification 2200) With River Bed material.

439.5

2693

1183692

... More
PLUM CONCRETE (1:3:6) Plain cement concrete of nominal mix (1:3:6) with coarse aggregate of which stone boulder of size 225 mm to 150mm of 60% of total dry volume to be placed in position as directed by Eng-in charge ,67% - 40 mm down single &33% - 20 mm down bazri , Coarse Sand ,Cement ( 53 grade ) mechanically mixed in 1:3:6 of rest volume and placed in position and compacted by any means as directed including cost of shuttering . Using N.B. variety Boulder 225 mm to 150 mm & Stone chips.

5281.8

4026

21267590

... More
Plain/Reinforced cement concrete in open foundation complete all including formwork, vibrating and compacting, finishing, curing, sampling, testing etc. as per drawing and Technical Specifications (Reference to MORT&H's specifications 1500, 1700 & 2200). PCC Grade M15 Using N.B. variety stone chips.

370.27

6693

2478532

... More
Plain/Reinforced cement concrete in sub-structure complete all including formwork, vibrating and compacting, finishing, curing, sampling, testing etc. by mechanically mixed as per drawing and Technical Specifications (Reference to MORT&H's specifications 1500, 1700 & 2200). RCC Grade M25 Height upto 5m, Using Concrete Mixer Using Pakur variety Stone Chips.

1225.032

9388

11501348

... More
Supplying, binding, fixing etc. including initial straightening, cutting to requisite length, hooking and bending to correct shape, placing in proper position of uncoated HYSD reinforcement bar in sub-structure complete as per drawing and Technical Specifications (Reference to MORT&H's specifications 1600 & 2200).

144.248

69536

10030515

... More
Drainage Spouts not less than 100 mm dia of corrosive resistance material, spacing not exceeding 10 m. complete as per drawing and Technical specification (Reference to MORT&H's specification 2705) Including Cost for corrosion resistant structural steel & for electrodes, cutting gas, sealant, anticorrosive bituminous paint, mild steel grating etc. complete.

92

1178

108434

... More
Filler joint (Reference to MORT&H's specification 2604). Providing & fixing 20 mm thick compressible fibre board inexpansion joint complete as per drawing & Technical Specification

299

251

75273

... More
Reinforced Cement Concrete Crash Barrier : Provision of an Reinforced cement concrete crash barrier at the edges of the road, approaches to bridge structures and medians, constructed with M-40 grade concrete with HYSD reinforcement conforming to IRC:21 and dowel bars 25 mm dia, 450 mm long at expansion joints filled with pre-moulded asphalt filler board, keyed to the structure on which it is built and installed as per design given in the enclosure to MOST circular No. RW/NH - 33022/1/94-DO III dated 24 June 1994 as per dimensions in the approved drawing and at locations directed by the Engineer, all as specified (Reference to MORT&H's specification 811). Using Pakur variety stone chips.

416

4340

1805573

... More
Painting Two Coats on New Concrete Surfaces Painting two coats, after filling the surface & applying a sealing primer, with synthetic enamel paint in all shades on new plastered concrete surfaces as per MORT7H's specification 803.6.2.(Reference to MORT&H's specification 803).

1157.76

71

82629

... More
Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC/PVC/HDPC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications (Reference to MORT&H's specifications 2706 & 2200). Using Cement & Coarse Sand

1470

152

223484

... More
Sub Total

-

-

-

... More
Add GST @ 18% on total amount

365149355

18

65726884



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.