Public Works Department Tender
... More
The PWD has issued a formal invitation for competitive bids for the Public Works Department project, for Repairing Of Damaged Slab Culvert At Ch. 2.85 Km 3.05 Km Of Nh-2 By- Pass To Naity Road Via Gobra R.s Road Under Serampore Bridge Highway Sub-division Of Hooghly Highway Division No- Ii In The District Of Hooghly During The Year 2025-26 in Hooghly, West Bengal, with an estimated contract value of Rs. 2,61,805. The bid opening date for this tender is 20-05-2025 and the last date for bid submission is 30-05-2025. Interested bidders for Public Works Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Public Works Department - PWD Tender
Civil And Construction
Bridge Construction
Eprocure
Opening Date20 May 2025
Closing Date30 May 2025
Tender Amount₹ 2,61,805
Costs
EMD
₹ 5,236Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Repairing Of Damaged Slab Culvert At Ch. 2.85 Km 3.05 Km Of Nh-2 By- Pass To Naity Road Via Gobra R.s Road Under Serampore Bridge Highway Sub-division Of Hooghly Highway Division No- Ii In The District Of Hooghly During The Year 2025-26
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_WBPWD_849359_1Bid Award Id
ViewTender No
WBPWRD/AE/SBHSD/eNIT1/2025-26Tender Authority
Public Works Department ViewPurchaser Address
-
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Hire and labour charges for shuttering with or without staging upto 4.0 m height using approved stout props with wooden planks/ ply wood /steel sheet plate with required bracing for any kind of plain or reinforced concrete works in all sorts of minor structures including culvert, box culvert, crossdrain etc. The rate is inclusive of fitting, fixing and striking out after completion of work as per specification and direction.
-
214
-
... More
Providing and laying Design Mix Concrete for Plain /reinforced concrete work in any part of bridge (excluding bottom plugging) with coarse aggregates of appropriate nominal size and grading, fine aggregate (sand) conforming to proper grading zone, both approved quality and cement as necessary including labour cost and carriage of all materials and including poreparation of design mix and approval of ht e same by the Engineer- in- charge and cost of quality control, sampling, testing etc. all complete but excluding cost of labour and materials for formwork & reinforcement work (a) M-15 Grade using concrete Mixer.
-
4730
-
... More
First Class Brick work in cement sand morter in steining of well, pier, abutment, wing wall, parapets, cross drain H.P Culverts, guard wall etc. including curing, scaffolding, raking out joints etc. complete including cost and carriage of all materials in 1: 4 proportion.
-
5542
-
... More
Plaster with sand and cement mortar including rounding off corners or chamfering corners as directed and including raking out joints or roufhneing of concrete surface, curing with cost and carriage of all materials. (a) with Cement mortar (4:1).
-
160
-
... More
Neat Cement Punning on cement plaster surface.
-
34
-
... More
painting the vertical end faces of posts, wheel guards or railing or parapet with alternate bands of different colours as directed by the Engineer-in- charge with approved synthetic enamel paint. Two coats.
-
99
-
... More
Supplying, fitting and placing HYSD bar reinforcement in Sub-structure including initial straightening, straightening of coils bars, removal of loose rust (if any), cutting to requisite length bending, binding with annealed wire not less than 1 mm in size and conforming to IS 280 at every intersection hooked and bent to correct shape and placed on forms etc. including cost of black annealed wire and cost of loading, unloading, carriage of all steel materials complete as per drawing and technical specifications and direction of Engineer-in-charge.
-
55564
-
... More
Removal of defective concrete, cleaning the surface thoroughly, applying the shotcrete mixture mechanically with compressed air under pressure, comprising of cement, sand, coarse aggregates, water and quick setting compound in the proportion as per clause 2807.1., sand and coarse aggregates conforming to IS: 383 and table 1 of IS:9012 respectively, water cement ratio ranging from 0.35 to 0.50, density of gunite not less than 2000 kg/cum, strength not less than 25 MPa and workmanship conforming to clause 2807.6. (40 mm average thickness.)
-
261
-
... More
Epoxy bonding of new concrete to old concrete.
-
517
-
... More
Welding by gas / electric plant including transportation of welding plant at site including cutting, forging & drilling to required shape.
-
1
-
... More
Cleaning the exposed corroded Reinforcement as well as worn out concrete by sand blasting with air compressor including all materials, hire charges of machineries and labour etc. all complete as per technical specification and direction of the Engineer-in-Charge.
-
604
-
... More
Providing anti-corrosive protective coating to inhibit the corrosion to HYSD reinforcements including two coats of anti-corrosive coatings of consumption as per manufacturer's specification, cleaning etc. complete as per the direction of the Engineer-in-Charge.
-
506
-
... More
Guniting concrete surface with cement mortar (25 mm nominal thick) applied with compressor after cleaning surface and spraying with epoxy complete as per Technical specification
-
912
-
... More
GST @ 18% over Sl. No. 1 to 11
-
18
-
... More
Labour Welfare Cess @ 1% over Sl. No. 1 to 11.01
-
1
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements