Public Works Department Tender
... More
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Electrical and Electronics
Electrical Works
Eprocure
Opening Date27 May 2025
Closing Date18 Jun 2025
Tender AmountRefer Documents
Costs
EMD
₹ 9,10,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Wbpwd/sewec /hed /niq-10 /2024-25
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_WBPWD_853436_1Tender No
WBPWD/SEWEC /HED /NIQ-10 /2024-25Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://wbpwd.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
3. Chilled Water 'In' : 12 Deg C
-
-
-
... More
4. Chilled Water 'Out': 7 Deg. C
-
-
-
... More
5. Chiller Fouling Factor : 0.0001 (FPS)
-
-
-
... More
6. The electrical panel should be IP55 protected (As per OEM Satndard)
-
-
-
... More
7. Ambient Temperature: 104 Deg F / 40 Deg C
-
-
-
... More
8. Minimum IKW/TR should be less than equal to 1.46 at design condition (Including Fan Power)
-
-
-
... More
9. Minimum COP at AHRI Condition not less than 3.0 & IPLV Minm 3.70 at AHRI conditions as per ECBC gudiline.
-
-
-
... More
10. EVAP Pressure drop as per OEM standard.
-
-
-
... More
(Make : Daikin / Climaveneta/ Kirloskar/ Carrier/ Bluestar/ Voltas/ Johnson Control/ Mitsubishi/Clivet)
-
-
-
... More
SITC of 125 mm dia Butterfly Valve (Make - Honeywell/ AUDCO/ Advance) (Installed at inlet/outlet pipe of chiller) - 2Nos.
-
-
-
... More
SITC of 125 mm dia Balancing Valve(Make-Honeywell/ AUDCO/ Advance) (Installed at inlet/outlet pipe of chiller for proper flow control) - 1 No.
-
-
-
... More
SITC of Flexible Connection - 125mm dia(Make - Cori/ Resistoflex) - 2 Nos.
-
-
-
... More
Supply, erection, testing & commissioning of Alcohol in glass type industrial thermometer complete with thermowell. (Make : HGURU/ AWAREE) (Installed at inlet/outlet pipe of chiller for monitoring temperature) - 2 Nos.
-
-
-
... More
SITC of 25 mm NB Ball Valve For descalling and drain (Make - Honeywell/ AUDCO/ Advance) (Installed at inlet/outlet pipe of chiller for drain water & descalling). --- 2 Nos.
-
-
-
... More
SITC of 15 mm NB Ball Valve For air purge valve /auto air vent(Make - Honeywell/ AUDCO/ Advance) (Installed at inlet/outlet pipe of chiller to remove air from system) - 1 No.
-
-
-
... More
SITC of Water flow switch for chillers (Make - Honeywell/ ANERGY) - 1 No.
-
-
-
... More
Design, Supply, Installation,Testing & Commissioning of HVAC Electrical Control Panel with Microprocessor Controller - 1 No. There should be provision for Integrated Electrical distribution system for power circuit & control circuit with MCCBs for Compressors & water pumps, Starters with push button (start & stop ), Bus Bar arrangement (Cu.), control copper wiring and inter connections. Consumer will provide Single Point Electrical Power Source to HVAC Panel. Bidder should design & supply the HVAC Panel accordingly. The Panel should have one number ACB incomer and MCCB outgoing for three chillers and pump motor set & with suitable starter and three spare switch (one for chiller & two for others) (A.C.B. & MCCB have Microprocessor-based protection release) (having electrical interlocking between Chiller & Chiller pump). [Manufacturer/ Fabricator having Test Certificates from CPRI]. An Auto Cad Drawing of this item has to approved by EIC before making of it mentioning all major technical details with specification and Make of each and individual part.
All ACB & MCCB make of Legrand/ABB/ Schneider/ Siemens
1
-1
-
... More
CHILLED WATER PUMP
-
-
-
... More
Supply, erection, testing & commissioning of Chilled water duty, end suction back pull out type centrifugal pumpset at (having Bronze/CI Impeller) with TEFC, IP-55, Class F insulated Sq. cage induction motor, complete with common base frame, spring vibration isolators, coupling and coupling guard for the following duty & including items as specified below : (Make - Kirloskar/ Grundfoss/ xylem/ Armstrong/ Flowmore/ KSB)
-
-
-
... More
Rated Flow 480 USGPM or higher at required water column head as per site condition (2 W + 1 S)
3
-
-
... More
SITC of Following sizes valves incl. necessary fixing materials as required.
-
-
-
... More
200 mm dia butterfly Valve (Make - Honeywell/ Advance/ Oswal/ Kirloskar/ audco/ zoloto/sant/C &R)
2
-
-
... More
125 mm dia Check Valve/NRV (Make - Honeywell/ Advance/ Oswal/ Kirloskar/ audco /zoloto/sant/C &R)
3
-
-
... More
125 mm dia butterfly Valve (Make - Honeywell/ Advance/ Oswal/ Kirloskar/ audco/ zoloto/sant/C &R)
6
-
-
... More
SITC of 125 mm dia Y Strainer (Make - Honeywell/ Advance/ Oswal/ Kirloskar/ audco/zoloto/sant/C &R)
3
-
-
... More
SITC of 4" Dial SS Pressure Gauge complete with syphon and isolation gauge cock.(Make - HGURU/ Tameson/ Equivalent)
6
-
-
... More
SITC of 25 mm NB Ball Valve For drain (Make - Honeywell/ Advance/ Oswal/ Kirloskar/ audco/zoloto/sant/C &R)
3
-
-
... More
SITC of Purgeing Valve/Auto air vent with 15 mm Ball valve (Make - Honeywell/ Advance/ Oswal/ Kirloskar/ audco/zoloto/sant/C &R)
82
-
-
... More
SITC of Flexible Connection (Make - Cori/Resistoflex/Esayflex)
-
-
-
... More
125 mm
6
-
-
... More
Supply, erection, testing & commissioning of Alcohol in glass type industrial thermometer complete with thermowell. (Make : HGURU/ AWAREE/Emereld/ Equivalent) (Installed at inlet/outlet pipe of chiller for monitoring temperature)
6
1
-
... More
Supply, Erection, Testing & Commissioning of MS ERW Chilled Water (Supply & Return) Piping (Class C) complete with flange , Tee, bend & other necessary fittings including weilding joints & MS supports and TF quality thermocol density 16kg/cum insulation with chicken wire mesh sand cement plaster (Pipes upto 150 NB shall be Heavy Grade as per IS: 1239 Part I and from 200 NB & above Pipes shall be as per IS: 3589 of specified thickness.) (Make-Tata/ Jindal/ SAIL)
-
-
-
... More
200mm NB (Insulation 50 mm thick)
400
-
-
... More
150mm NB (Insulation 50 mm thick)
150
-
-
... More
125mm NB (Insulation 50 mm thick)
500
-
-
... More
100mm NB (Insulation 50 mm thick)
550
-
-
... More
80 mm NB (Insulation 50 mm thick)
100
-
-
... More
65 mm NB (Insulation 50 mm thick)
100
-
-
... More
50mm NB (Insulation 50 mm thick)
250
-
-
... More
40mm NB (Insulation 50 mm thick)
240
-
-
... More
32mm NB (Insulation 50 mm thick)
300
-
-
... More
25mm NB (Insulation 50 mm thick)
1200
1
-
... More
Floor Mounted Outdoor type Air Handling Unit -
-
-
-
... More
SITC of site assembled floor mounted modular Double skinned construction with continuous insulation with thermal break. The AHU enclosure's outer & inner Skin layer of 0.6 mm or higher & outer skin has to be polymer coated and insulation panel should be made of thermal break profile - PUF insulation with thickness of at least 25mm or better and density should not be less then 40 +_ 2 kg /m3 . The AHU should be extrating @ 180CFM stale air with the arrangement of VCD and injection of fresh air @ 160 CFM with VCD with 02 (Two) stage filtration system (Prefilter having efficiency (EU - 4/MERV7) 90% down to10 micron, Fine Filter having efficiency 95% down to 5 micron (MERV-14) (Make - FMI/ Spectrum/ Thermi) for both Inlet & Outlet including UV lamp of suitable rating for each of the air-suction & discharge of condition space as well as injection of fresh air and emmission of stale air as per direction of EIC).The AHU Coil to be with hydrofolic coating. The addon suitable gadgets shall be a set of butterfly, balancing & control valve, Y strainer with pressure gauge & temparature gauge each AHU.
-
-
-
... More
The AHU Fan assembly should be either motor directly coupled with Impeller or Belt driven as per OEM standard suitable for air velocity less then 10m/sce through the multi-layer (6-8 row)12 mm - 19 mm dia Copper tubes with Alluminium Fins (as per OEM standard). The AHU shall consist of 1 no. Centrifugal Blower with 2 nos. (I W + lS) TEFC Squirell cage induction motor with Supply Air Damper. There should be AHU fans of Forward/ Backward Curve, with discharge not less than 2000 CFM, compatable for 415V, 50 Hz supply continuous duty Class IE 2 (Make for Fan Unit - Nicotra/ Kruger/ Caryaire) (Make for Motor - Crompton / Kirloskar/ NEC/ ABB/ Siemens).External Static pressure will be within 10 - 20 mm Wg. There should be electrical interlocking/switching arrangement for running the system in possitive or negetive pressure mode as per requirement.(Make : Zeco / System Air/ Edgetech/Daikin/Jaypee/Carrier India / Waves / Climcone) (AHRI/EUROVENT CERTIFIED) (GF/Iso -1&2)
1
-
-
... More
SITC of site assembled floor mounted modular Double skinned construction with continuous insulation with thermal break. The AHU enclosure's outer & inner Skin layer of 0.6 mm or higher & outer skin has to be polymer coated and insulation panel should be made of thermal break profile - PUF insulation with thickness of at least 25mm or better and density should not be less then 40 +_ 2 kg /m3. The AHU should be extracting @ 330CFM stale air with the arrangement of VCD and injection of fresh air @ 300 CFM with VCD with 02 (Two) stage filtration system (Prefilter having efficiency (EU - 4/MERV7) 90% down to10 micron, Fine Filter having efficiency 95% down to 5 micron (MERV-14) (Make - FMI/ Spectrum/ Thermi) for both Inlet & Outlet including UV lamp of suitable rating for each of the air-suction & discharge of condition space as well as injection of fresh air and emmission of stale air as per direction of EIC).The AHU Coil to be with hydrofolic coating. The addon suitable gadgets shall be a set of butterfly, balancing & control valve, Y strainer with pressure gauge & temparature gauge each AHU.
-
-
-
... More
The AHU Fan assembly should be either motor directly coupled with Impeller or Belt driven as per OEM standard suitable for air velocity less then 10m/sce through the multi-layer (6-8 row)12 mm - 19 mm dia Copper tubes with Alluminium Fins (as per OEM standard). The AHU shall consist of 1 no. Centrifugal Blower with 2 nos. (I W + lS) TEFC Squirell cage induction motor with Supply Air Damper. There should be AHU fans of Forward/ Backward Curve, with discharge not less than 3400 CFM, compatable for 415V, 50 Hz supply continuous duty Class IE 2 (Make for Fan Unit - Nicotra/ Kruger/ Caryaire) (Make for Motor - Crompton / Kirloskar/ NEC/ ABB/ Siemens).External Static pressure will be within 10 - 20 mm Wg. There should be electrical interlocking/switching arrangement for running the system in possitive or negetive pressure mode as per requirement.(Make : Zeco / System Air/ Edgetech/Daikin/Jaypee/Carrier India / Waves / Climcone) (AHRI/EUROVENT CERTIFIED) (3rd F/Iso -1,2,3&4)
1
-
-
... More
SITC of site assembled floor mounted modular Double skinned construction with continuous insulation with thermal break. The AHU enclosure's outer & inner Skin layer of 0.6 mm or higher & outer skin has to be polymer coated and insulation panel should be made of thermal break profile - PUF insulation with thickness of at least 25mm or better and density should not be less then 40 +_ 2 kg /m3. The AHU should be extracting @ 370 CFM stale air with the arrangement of VCD and injection of fresh air @370 CFM with VCD with 02 (Two) stage filtration system (Prefilter having efficiency (EU - 4/MERV7) 90% down to10 micron & Fine Filter having efficiency 95% down to 5 micron (MERV-14) (Make - FMI/ Spectrum/ Thermi) including UV lamp of suitable rating for each of the air-suction & discharge of condition space as well as injection of fresh air and emmission of stale air as per direction of EIC). The AHU Coil to be with hydrofolic coating. The addon suitable gadgets shall be a set of butterfly, balancing & control valve, Y strainer with pressure gauge & temparature gauge each AHU.
-
-
-
... More
The AHU Fan assembly should be either motor directly coupled with Impeller or Belt driven as per OEM standard suitable for air velocity less then 10m/sce through the multi-layer (6-8 row)12 mm - 19 mm dia Copper tubes with Alluminium Fins (as per OEM standard ) The AHU shall consist of 1 no. Centrifugal Blower with 2 nos. (I W + lS) TEFC Squirell cage induction motor with Supply Air Damper. There should be AHU fans of Forward/ Backward Curve, with discharge not less than 3400 CFM, compatable for 415V, 50 Hz supply continuous duty Class IE 2 (Make for Fan Unit - Nicotra/ Kruger/ Caryaire) (Make for Motor - Crompton / Kirloskar/ NEC/ ABB/ Siemens).External Static pressure shall be within 10 - 20 mm Wg +obstruction to overcome hepa filter at laminer bench. There should be electrical interlocking/switching arrangement for running the system in possitive or negetive pressure mode as per requirement. (Make : Zeco / System Air/ Edgetech/Daikin/Jaypee/Carrier India/ Waves / Climcone) (AHRI/EUROVENT CERTIFIED)(6th F- OT-1&2)
2
-
-
... More
SITC of site assembled floor mounted modular Double skinned construction with continuous insulation with thermal break. The AHU enclosure's outer & inner Skin layer of 0.6 mm or higher & outer skin has to be polymer coated and insulation panel should be made of thermal break profile - PUF insulation with thickness of at least 25mm or better and density should not be less then 40 +_ 2 kg /m3. The AHU should be extracting @ 610CFM stale air with the arrangement of VCD and injection of fresh air @ 550 CFM with VCD with 02 (Two) stage filtration system (Prefilter having efficiency (EU - 4/MERV7) 90% down to10 micron, Fine Filter having efficiency 95% down to 5 micron (MERV-14) (Make - FMI/ Spectrum/ Thermi) for both Inlet & Outlet including UV lamp of suitable rating for each of the air-suction & discharge of condition space as well as injection of fresh air and emmission of stale air as per direction of EIC).The AHU Coil to be with hydrofolic coating. The addon suitable gadgets shall be a set of butterfly, balancing & control valve , Y strainer with pressure gauge & temparature gauge each AHU.
-
-
-
... More
The AHU Fan assembly should be either motor directly coupled with Impeller or Belt driven as per OEM standard suitable for air velocity less then 10m/sce through the multi-layer (6-8 row)12 mm - 19 mm dia Copper tubes with Alluminium Fins (as per OEM standard). The AHU shall consist of 1 no. Centrifugal Blower with 2 nos. (I W + lS) TEFC Squirell cage induction motor with Supply Air Damper. There should be AHU fans of Forward/ Backward Curve, with discharge not less than 6600 CFM, compatable for 415V, 50 Hz supply continuous duty Class IE 2 (Make for Fan Unit - Nicotra/ Kruger/ Caryaire) (Make for Motor - Crompton / Kirloskar/ NEC/ ABB/ Siemens).External Static pressure will be within 10 - 20 mm Wg. There should be electrical interlocking/switching arrangement for running the system in possitive or negetive pressure mode as per requirement.(Make : Zeco / System Air/ Edgetech/Daikin/Jaypee/Carrier India / Waves / Climcone) (AHRI/EUROVENT CERTIFIED) (2nd F - 30 Bedded Isolation Ward)
2
-
-
... More
SITC of site assembled floor mounted modular Double skinned construction with continuous insulation with thermal break. The AHU enclosure's outer & inner Skin layer of 0.6 mm or higher & outer skin has to be polymer coated and insulation panel should be made of thermal break profile - PUF insulation with thickness of at least 25mm or better and density should not be less then 40 +_ 2 kg /m3. The AHU should be extracting @ 710CFM stale air with the arrangement of VCD and injection of fresh air @640 CFM with VCD with 02 (Two) stage filtration system (Prefilter having efficiency (EU - 4/MERV7) 90% down to10 micron, Fine Filter having efficiency 95% down to 5 micron (MERV-14) (Make - FMI/ Spectrum/ Thermi) for both Inlet & Outlet including UV lamp of suitable rating for each of the air-suction & discharge of condition space as well as injection of fresh air and emmission of stale air as per direction of EIC).The AHU Coil to be with hydrofolic coating. The addon suitable gadgets shall be a set of butterfly, balancing & control valve, Y strainer with pressure gauge & temparature gauge each AHU.
-
-
-
... More
The AHU Fan assembly should be either motor directly coupled with Impeller or Belt driven as per OEM standard suitable for air velocity less then 10m/sce through the multi-layer (6-8 row)12 mm - 19 mm dia Copper tubes with Alluminium Fins (as per OEM standard). The AHU shall consist of 1 no. Centrifugal Blower with 2 nos. (I W + lS) TEFC Squirell cage induction motor with Supply Air Damper. There should be AHU fans of Forward/ Backward Curve, with discharge not less than 6600 CFM, compatable for 415V, 50 Hz supply continuous duty Class IE 2 (Make for Fan Unit - Nicotra/ Kruger/ Caryaire) (Make for Motor - Crompton / Kirloskar/ NEC/ ABB/ Siemens).External Static pressure will be within 10 - 20 mm Wg. There should be electrical interlocking/switching arrangement for running the system in possitive or negetive pressure mode as per requirement.(Make : Zeco / System Air/ Edgetech/Daikin/Jaypee/Carrier India/ Waves / Climcone) (AHRI/EUROVENT CERTIFIED) ((3rd F/Iso -5.6.7.8.9&10)
1
-
-
... More
SITC of site assembled floor mounted modular Double skinned construction with continuous insulation with thermal break. The AHU enclosure's outer & inner Skin layer of 0.6 mm or higher & outer skin has to be polymer coated and insulation panel should be made of thermal break profile - PUF insulation with thickness of at least 25mm or better and density should not be less then 40 +_ 2 kg /m3. The AHU should be extracting @ 700CFM stale air with the arrangement of VCD and injection of fresh air @630 CFM with VCD with 02 (Two) stage filtration system (Prefilter having efficiency (EU - 4/MERV7) 90% down to10 micron, Fine Filter having efficiency 95% down to 5 micron (MERV-14) (Make - FMI/ Spectrum/ Thermi) for both Inlet & Outlet including UV lamp of suitable rating for each of the air-suction & discharge of condition space as well as injection of fresh air and emmission of stale air as per direction of EIC).The AHU Coil to be with hydrofolic coating. The addon suitable gadgets shall be a set of butterfl, balancing & control valve , Y strainer with pressure gauge & temparature gauge each AHU.
-
-
-
... More
The AHU Fan assembly should be either motor directly coupled with Impeller or Belt driven as per OEM standard suitable for air velocity less then 10m/sce Alluminium Fins (as per OEM standard). The AHU shall consist of 1 no. Centrifugal Blower with 2 nos. (I W + lS) TEFC Squirell cage induction motor with Supply Air Damper. There should be AHU fans of Forward/ Backward Curve, with discharge not less than 8000 CFM, compatable for 415V, 50 Hz supply continuous duty Class IE 2 (Make for Fan Unit - Nicotra/ Kruger/ Caryaire) (Make for Motor - Crompton / Kirloskar/ NEC/ ABB/ Siemens).External Static pressure will be within 10 - 20 mm Wg. There should be electrical interlocking/switching arrangement for running the system in possitive or negetive pressure mode as per requirement.(Make : Zeco / System Air/ Edgetech/Daikin/Jaypee/Carrier India/ Waves / Climcone) (AHRI/EUROVENT CERTIFIED) ((4th F-20 Bed HDU & 5th F-20 Bed ICU)
4
-
-
... More
SITC of Aluminium laminar bench with perforated sheet cover to accommodate inside HEPA filter bank along with necessary support as per standard of minimum 6 ft X 8ft dimension for OT Area as per approved drawing necessary flange joints of air duct shall have to be fixed with sealant adhesive to prevent leakage.
2
-
-
... More
Chilled water In-duct type Indoor FCU units with compact 3 Row Cu. cooling coil, multi-speed fan motor, the blower shall be dynamicaly balanced and designed for silent operation, the filters shall be washable synthetic media type arranged for convenient cleaning and replacement and inbuilt drain pump. The Unit should be equipped with Ball Valves / Stainer & Actuator as required. The unit is to be supplied with chorded remote controller.
-
-
-
... More
2.5 TR (Make - Daikin/ Johnson Control/ EdgeTech/ Zeco/ VTS/ Citizen/Jaypee /Carrier India)
15
-
-
... More
2 TR (Make - Daikin/ Johnson Control/ EdgeTech/ Zeco/ VTS/ Citizen/Jaypee /Carrier India)
50
-
-
... More
1.5 TR (Make - Daikin/ Johnson Control/ EdgeTech/ Zeco/ VTS/ Citizen/Jaypee /Carrier India)
10
-
-
... More
1 TR (Make - Daikin/ Johnson Control/ EdgeTech/ Zeco/ VTS/ Citizen/Jaypee /Carrier India)
16
1
-
... More
Supply, erection, testing & commissioning of 2000 litre capacity PVC double-layer expansion / cushion tank, insulated with cover of thermocol, sand, cement plaster as per chilled water piping (Make - Syntex/ Patton/ Supreme), provision of make up water inlet, overflow outlet, Air release vent, etc.
1
-
-
... More
Supply and Laying of Rigid PVC Drain Pipe (Medium Class)with respective fittings ,proper supports at 5 feet interval and duly insulated with 6 mm thick closed cell nitrile rubber insulation. (Make : Oriplast/ Supreme/ Filolex/ Ashirbad/ Astral)
-
-
-
... More
20 mm NB
100
-
-
... More
32 mm NB
100
-
-
... More
40 mm NB
100
-
-
... More
Supply and fixing of Flexible double Canvas connection in between each FCU & Al. Supply Air grill mounted on Gypsum Boxing cover. (Custom Make or Asper direction of EIC)
192
-
-
... More
Supply & fixing of Powder coated extruded Alluminium return air grilles (Make : Premier/ Systemair/ Caryaire/ Air Enterprise) without volume control dampers.
150
-
-
... More
Supply & fixing of Al powder coated extruded Alluminium Supply air grilles (Make : Premier/ Systemair/ Caryaire/ Air Enterprise) with alluminium volume control damper.
100
1
-
... More
Major & minor civil works required to execute before and after the HVAC works for mending good damages to original finish painting.
1
-
-
... More
SITC of GI Duct of Class - VIII grade for supply/ return air duct along with pre fabricated plenum for supply and return air with necessary supports, flanges etc. as required and as per IS 655 and IS -277 standards of following gauges. (Make- Sail/Jindal/Tata))
-
-
-
... More
24 SWG thick
1500
-
-
... More
22 SWG thick
350
-
-
... More
SITC of AL Duct of for supply/ return air duct along with pre fabricated plenum for supply and return air with necessary supports, flanges etc. as required and as per IS standards of following gauges. For OT Only.
100
-
-
... More
Supply & fixing of drop ceiling made of gypsum / E-board (3 mm thick) incl. Al. channel & complete with linkages, levers, fittings, supports, all accessories any other item required to make the system complete to cover the indoor units of concealed split unit incl. painting the board as per direction of EIC.
1100
-
-
... More
Supply, fabrication & fixing of trap door with 3 mm thick ACP board (MAKE- Aludecor/ Urobond or others reputed make) complete with inkages, levers, fitings.support all accessories for IDU maintenance as per direction of EIC.
200
-
-
... More
Supply and fixing acoustic lining of supply air duct and plenum with 13 mm thick open cell Nitrile rubber (Class-O) of density 140Kg/cum-160Kg/cum insulation with cadmium plated nuts, bolts, stick pins, CPRX compound etc. completed as per direction of EIC (Make-Accroflex/ K-flex/Armacell).
200
-
-
... More
Supply and fixing Heat Retardant closed cell Class'O' 25 mm thick Nitrile Rubber insulation with AI Foil Faced Outside Supply Air duct. (Make-Armacell/K-flex /Accroflex)
1850
-
-
... More
Supply & Fixing of underdeck insulation with 50mm thick, 32Kg/Cu Mtr. TF quality Expanded polysterene slab(Make-Thermowell/ Board sell)
350
-
-
... More
Supply & Fixing of Motorised Fire Damper, Galvanized Steel Sheet with 125 GSM Zink Coated, Certified by CBRI ( U-555, 1995) with minimum fire rating not less than 120 min, must be Fusiable Link Spring with 74°C Temperature rating Ul Listed with actuator as per requirement. (Make-Greenheck/Systemair/Air master/Caryaire)
11
-
-
... More
SITC of heavy duty anti vibrational pad to protect the system from any kind of unwanted vibration.
11
1
-
... More
Supply & Fixing of Bird Screen as per direction of E.I.C.
11
-
-
... More
Supply of 2/4 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [ Make : Havells/ Gloster/ Polycab/ KEI]
-
-
-
... More
4 Core 300 Sq. mm
320
-
-
... More
4 Core 16 Sq. mm
220
1
-
... More
4 Core 10 Sq. mm
300
-
-
... More
Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting
-
-
-
... More
4 Core 300 Sq. mm
224
-
-
... More
4 Core 16 Sq. mm
154
1
-
... More
4 Core 10 Sq. mm
210
-
-
... More
Laying of cable as below, on existing Cable Tray and binding with suitable size GI wire.
-
-
-
... More
4 Core 300 Sq. mm
96
-
-
... More
4 Core 16 Sq. mm
66
1
-
... More
4 Core 10 Sq. mm
90
-
-
... More
Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support.
(i) With 25x25x3mm angle iron support
-
-
-
... More
200x50x1.25mm (18SWG)
120
-1
-
... More
300x50x1.25mm (18SWG)
80
-
-
... More
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :
-
-
-
... More
4 Core 300 Sq. mm
4
-
-
... More
4 Core 16 Sq. mm
12
1
-
... More
4 Core 10 Sq. mm
10
-
-
... More
Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials
-
-
-
... More
4 Core 300 Sq. mm
4
-
-
... More
4 Core 16 Sq. mm
12
1
-
... More
4 Core 10 Sq. mm
10
-
-
... More
S & Laying of 1.1 KV Grade PVC/ XLPE insulated, PVC sheathed cable, copper unmoured control cable incl. to laid on wall surface by suitable clamping, proper glanding & finishing the cable ends with solderless sockets for following cables(Make-Gloster/Polycab/Havells)
-
-
-
... More
7 Core 1.5 Sq. Sq.mm XLPE round copper Cable
500
-1
-
... More
4 Core 2.5 Sq. Sq.mm XLPE copper Cable
150
-
-
... More
SITC of wall mounted AHU Electric control panel, having rigid and self supporting structure fabricated with 14 SWG CRCA sheet with M.S. angle iron frame (main frame with 25 x 25 x 5 mm MS )angle.The panel is to be properly gasketed to prevent the dust & vermin. The panel consist of following accessories.
-
-
-
... More
i)32A FP MCB- 1No. (L&T/ABB/Siemens) As incomer
Bus Bar: 63 A Aluminium Bus bar -1 Set Out Going: i)25A FP MCB- 1No. (L&T/ABB/Siemens) ii) 6 A SP MCB -1No. (L&T/ABB/Siemens) iii) DOL Starter-1No. (L&T/ABB/Siemens) iv) 4Pole Power contactor-1 No. (L&T/ABB/Siemens) v) On delay timer-1no. (L&T/ABB/Siemens) vi) ON/OFF Push Button- 1 Set (L&T/ABB/Siemens) vii) LED indicationg Lamp ON/OFF-1Set
4
-
-
... More
SITC of wall mounted AHU Electric control panel, having rigid and self supporting structure fabricated with 14 SWG CRCA sheet with M.S. angle iron frame (main frame with 25 x 25 x 5 mm MS )angle.The panel is to be properly gasketed to prevent the dust & vermin. The panel consist of following accessories.
-
-
-
... More
i)63A FP MCB- 1No. (L&T/ABB/Siemens) As incomer
Bus Bar: 100 A Aluminium Bus bar -1 Set Out Going: i)63A FP MCB- 1No. (L&T/ABB/Siemens) ii) 6 A SP MCB -1No. (L&T/ABB/Siemens) iii) DOL Starter-1No. (L&T/ABB/Siemens) iv) 4Pole Power contactor-1 No. (L&T/ABB/Siemens) v) On delay timer-1no. (L&T/ABB/Siemens) vi) ON/OFF Push Button- 1 Set (L&T/ABB/Siemens) vii) LED indicationg Lamp ON/OFF-1Set
7
-
-
... More
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with
bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:
(a) By ISI-Medium GI pipe
2
-
-
... More
Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.
Solid GI wire No. 4 SWG
30
1
-
... More
Others Panel
-
-
-
... More
Supply and installation of L.T. cubical type fully compartmentalized distribution panel board(Raw Normal Power), having rigid and self supporting structure fabricated with 14 SWG CRCA sheet with M.S. angle iron frame (main frame with 50 x 50 x 6 mm angle and each vertical compartment with 40 x 40x6 mm MS angle iron). The base of panel should be made with 75mm x 40mm x 4.4 mm M.S. channel. (Main LT panel comprised of two nos. 800A, ACB, EDO as incomer , One 800A ACB EDO as bus coupler. The incomer ACB's & Bus-coupler are to be elctrically & mechanically interlocked to prevent any malfunction.) [Manufacturer/ Fabricator having Test Certificates from CPRI]. An Auto Cad Drawing of this item has to approved by EIC before making of it mentioning all major technical details with specification and Make of each and individual part.
1
3
-
... More
Construction Details :
-
-
-
... More
All incoming & outgoing switches are to be housed in respective compartments hinged and gasket doors at the front. All doors should have panel locking arrangement in such a fashion that it can not be on unless the feeder remains in off position. The rear panel should gasketed wire net guard for ventilation arrangement will be made of easy accessibility to each compartment by providing rear panel doors with locking system . The panel is to be properly gasketed to prevent the dust & vermin. All combination of Horizontal and vertical bus bar chambers is to properly arrange and all electrical equipments are to be fixed by nuts and bolts on suitable Hylam board / porcelain insulators of adequate size and dimension. The outgoing feeder connection from respective switches are to be made at rear side of panel by means of busbar, Aluminium multi core cables/Aluminium Bar, to be terminated on bolted type terminals for cable connection or on bush insulators for bus bar connection. Each compartment will be providing with DMC/FRP board at back side.
-
-
-
... More
Incoming Arrangement :
-
-
-
... More
SITC of following ACBs conforming to IS 13947 - 2 - 1993 as amended upto date and should have minimum following protection i) adjustable overload with time delay, ii) adjustable short circuit with time delay, iii) Instantaneous current, iv) adjustable Earth fault with time delay, v)adjustable neutral protection - (min. 50%, 100%). All the ACBS should also have12kV Impulse withstand capacity, temperature rise protection in-built in release, inbuilt energy metering of class 1, test facility, inbuilt capability of - a)measurement of current, Voltage, unbalance, Power, Energy, MD with date & time stamp, Power Factor etc., & b) Remote Control (ON, OFF, TRIP) and monitoring of all above parameters and Nature of Fault, TRIP History (minimum 10) etc. The ACB should have U/V Release and at least spare 4NO + 4NC auxiliary contact. There should be LED indicating lamp for showing ON, OFF, TRIP & Spring charge indication on the panel door, The Release data (Voltage & current waveform at the time of trip) should be available even at Breaker Off & DC power fail condition.
-
-
-
... More
i) 415 V, 800A, 50 kA 4(four) pole electrically draw- out type A.C.B. with Microprocessor-based protection release.-2 (One) no.
(Make – L & T/ SIEMENS/ABB/Schneider) ii) 415 V, 800A, 50 kA 4(four) pole electrically draw- out type A.C.B. with Microprocessor-based protection release.-1 (One) no. As Bus Coupler (Make – Legrand/ SIEMENS/ABB/Schneider)
-
-
-
... More
Buscoupler arrangement: 415 V, 800A 4(four) pole 50 KA electrically draw- out type A.C.B. with Microprocessor-based electromechanical interlocking Arrangement. Manually operated with interlocked doors, automatic safety shutters, mechanical ON / OFF and service / test / isolated position indicators and frame earthing contact, 1 no. independent manual spring closing mechanism, 1 no. shunt trip coil 220 Volts AC, conforming to IS 13947 - 2 - 1993 as amended upto date - 1 set. The interlocking arrangement(both electrical & mechanical) should be such that in case of failure of one transformer the entire panel will be charged by one transformer after adjusting the connected load. Otherwise in normal condition the two different supply from two different transformers should be separated and accordingly load will be distributed to hospital.
-
-
-
... More
Bus bar section :
-
-
-
... More
BUSBAR:
500 V, 1200 Amp capacity 99.9% – 99.5% electrolytic tinned 4 bar copper bus bar mounted on non-hygroscopic porcelain insulator / hylam sheet having sufficient di-electric strength duly wrapped with colour PVC tapes (Red, yellow, blue & black) for phases & neutral identification- 1 set.
-
-
-
... More
The busbar is to be rigidly supported on suitable non-hygroscopic insulating materials of robust ration to with stand electromechanical stress in the event of earth fault. All connection to bus to made by suitable nuts & bolts. The busbar is too wrapped with coloured PVC (Red. Yellow, Blue & Black) for colour identifications.
-
-
-
... More
Outgoing Arrangement :
-
-
-
... More
SITC of following ACBs conforming to IS 13947 - 2 - 1993 as amended upto date and should have minimum following protection i) adjustable overload with time delay, ii) adjustable short circuit with time delay, iii) Instantaneous current, iv) adjustable Earth fault with time delay, v)adjustable neutral protection - (min. 50%, 100%). All the ACBS should also have12kV Impulse withstand capacity, temperature rise protection in-built in release, inbuilt energy metering of class 1, test facility, inbuilt capability of - a)measurement of current, Voltage, unbalance, Power, Energy, MD with date & time stamp, Power Factor etc., & b) Remote Control (ON, OFF, TRIP) and monitoring of all above parameters and Nature of Fault, TRIP History (minimum 10) etc. The ACB should have U/V Release and at least spare 4NO + 4NC auxiliary contact. There should be LED indicating lamp for showing ON, OFF, TRIP & Spring charge indication on the panel door, The Release data (Voltage & current waveform at the time of trip) should be available even at Breaker Off & DC power fail condition.
-
-
-
... More
b. 415V (Uimp=12KV peak), Icu@415V=Ics=Icw for 1 sec = 50kA, 800A, 4P Electrical draw out type Communicable by onboard ethernet, Air Circuit breaker, with microprocessor based LSIGN release. -2 Set. (Make – Legrand/ SIEMENS/ABB/Schneider)
-
-
-
... More
c. 415V, 4 pole 50 kA (Uimp=8KV), Ics= 100% Icu MCCB with communicable by onboard ethernet, microprocessor based release having adjustable O/L (0.4 to 1x In or better), Adjustable S/C (1/1.5 - 8/10 Ir), Inbuilt Instantaneous protection, Adjustable E/F , Adjustable neutral protection at 50%, 100% and & inbuilt energy metering, Both side spreader link, extended rotary handle. The MCCB should be selected for making communication, transmission of measurements, states and alarms from circuit-breaker to system, transmission of events to the system and remote monitoring. There should be LED indicating lamp for showing On, OFF, TRIP indication on the panel door etc. (Make: Siemens/ABB/Schneider/Legrand)
-
-
-
... More
a)630 A MCCB - 3 Set (Make: L&T/Siemens/ABB/Schneider/Legrand)
-
-
-
... More
b) 415 V, 125A TPN SFU with 3 nos DIN type HRC Fuse- 3 Set (Make: L&T/Siemens/ABB/Schneider)
-
-
-
... More
c) 415 V, 63A TPN SFU with 3 nos DIN type HRC Fuse- 2 Set (Make: L&T/Siemens/ABB/Schneider)
-
-
-
... More
Metering Panel
-
-
-
... More
a) Multifunction Meter Digital Type Load Monitor (Make – L & T/ SIEMENS/ABB/Schneider) - 5 Nos.,
-
-
-
... More
b) Indicating LED Lamp with colour glasses showing (Red/Yellow/Blue) (L&T/ABB/Siemens) - 8 Set.
-
-
-
... More
c) 800/5 Amp ratio C.T (Kappa or equivalent) --- 18 nos.
-
-
-
... More
d) 630/5 Amp ratio C.T (Kappa or equivalent) --- 6 nos.
-
-
-
... More
e) Supplying & Fixing 6 Amp SP MCB---- 33 nos.
-
-
-
... More
f) Danger board---- 2 nos.
-
-
-
... More
Interconnection :-
-
-
-
... More
All interconnection between incoming main to Busbar are to be made with suitable size 99.9% – 99.5% electrolytic tinned copper bars or equivalent flexible pvc insulated multistranded single cor Cu cable and the same between busbar to all outgoing mains and also for metering arrangements are to be made by suitable size of Copper wire with proper socketing of the end of each wire leads.
-
-
-
... More
Earthing :-
-
-
-
... More
A separate continuous GI earth busbar of size 50mm x 6mm is to be placed at the inside bottom of the panel and run across the full length of the panel board atleast extended for 75 mm at both side end of panel and should have drill hole to fit in 12x50mm GI nut bolt for earth strip connection.
-
-
-
... More
The complete panel board is to be spray painted after required surface treatment by 7 tanks process / sand blasting with 2 coat of red oxide primer & 2 coat of finished paint over dried or powder coating.
-
-
-
... More
Installation :-
-
-
-
... More
The complete panel board is to be installed on suitable brick padestal as directed by the E.I.C.
-
-
-
... More
All incoming/outgoing switches is to be properly lebeled on Acrylic sheet as per direction of EIC.
-
-
-
... More
Preparation & submission of a Chiller Plant drawing (by AUTO-CAD) showing Chiller unit with all accessories, Water Line (inlet & outlet) with accessories, AHU,FCU etc.
5
-
-
... More
N.B. :
1) Few specific facility such as Oil Pressure Indicator, Trip arrangement for High Pressure & Low Pressure Cut Off, Anti-freezing Cut Off, Reversal of Phases & Phase failure Cut Off, Flow Switch Cut Off should be incorporated in the system
2) Any other minor item or items left out due to inadvertance should be deemed to be included in the scope of work. Bidders are advised to physically visit the site in accordance with the building drawing to be provided by the Tender Inviting Authority and quote the price accordingly.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%